@@ -42,14 +42,14 @@ enum psil_endpoint_type {
/**
* struct psil_endpoint_config - PSI-L Endpoint configuration
* @ep_type: PSI-L endpoint type
+ * @channel_tpl: Desired throughput level for the channel
* @pkt_mode: If set, the channel must be in Packet mode, otherwise in
* TR mode
* @notdpkt: TDCM must be suppressed on the TX channel
* @needs_epib: Endpoint needs EPIB
- * @psd_size: If set, PSdata is used by the endpoint
- * @channel_tpl: Desired throughput level for the channel
* @pdma_acc32: ACC32 must be enabled on the PDMA side
* @pdma_burst: BURST must be enabled on the PDMA side
+ * @psd_size: If set, PSdata is used by the endpoint
* @mapped_channel_id: PKTDMA thread to channel mapping for mapped channels.
* The thread must be serviced by the specified channel if
* mapped_channel_id is >= 0 in case of PKTDMA
@@ -62,23 +62,22 @@ enum psil_endpoint_type {
*/
struct psil_endpoint_config {
enum psil_endpoint_type ep_type;
+ enum udma_tp_level channel_tpl;
unsigned pkt_mode:1;
unsigned notdpkt:1;
unsigned needs_epib:1;
- u32 psd_size;
- enum udma_tp_level channel_tpl;
-
/* PDMA properties, valid for PSIL_EP_PDMA_* */
unsigned pdma_acc32:1;
unsigned pdma_burst:1;
+ u32 psd_size;
/* PKDMA mapped channel */
- int mapped_channel_id;
+ s16 mapped_channel_id;
/* PKTDMA tflow and rflow ranges for mapped channel */
u16 flow_start;
u16 flow_num;
- u16 default_flow_id;
+ s16 default_flow_id;
};
int psil_set_new_ep_config(struct device *dev, const char *name,
Optimize struct psil_endpoint_config for size by - reordering fields - grouping bitfields - change mapped_channel_id type to s16 (32K channel is enough) - default_flow_id type to s16 as it's assigned to -1 before: text data bss dec hex filename 12654100 5211472 666904 18532476 11ac87c vmlinux after: 12654100 5208528 666904 18529532 11abcfc vmlinux diff: 2944 bytes Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- include/linux/dma/k3-psil.h | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)