| Message ID | 1611944866-29373-2-git-send-email-spujar@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Tegra186 and Tegra194 audio graph card | expand |
On Fri, Jan 29, 2021 at 11:57:38PM +0530, Sameer Pujar wrote: > Update following in rt5659.txt binding doc > - Add JD source for Intel HDA header: Commit 041e74b71491 > ("ASoC: rt5659: Add the support of Intel HDA Header") > added driver support. Add missing info here. > > - sound-name-prefix: Used to prefix component widgets/kcontrols > with given prefix. > > - ports: Helps to use the Codec with audio graph card > > Signed-off-by: Sameer Pujar <spujar@nvidia.com> > Reported-by: Jon Hunter <jonathanh@nvidia.com> > Cc: Oder Chiou <oder_chiou@realtek.com> > Cc: Bard Liao <bardliao@realtek.com> > --- > Documentation/devicetree/bindings/sound/rt5659.txt | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt > index 56788f5..c473df5 100644 > --- a/Documentation/devicetree/bindings/sound/rt5659.txt > +++ b/Documentation/devicetree/bindings/sound/rt5659.txt > @@ -37,10 +37,21 @@ Optional properties: > - realtek,jd-src > 0: No JD is used > 1: using JD3 as JD source > + 2: JD source for Intel HDA header > > - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. > - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin. > > +- sound-name-prefix: Please refer to name-prefix.txt > + > +- ports: A Codec may have a single or multiple I2S interfaces. These > + interfaces on Codec side can be described under 'ports' or 'port'. > + When the SoC or host device is connected to multiple interfaces of > + the Codec, the connectivity can be described using 'ports' property. > + If a single interface is used, then 'port' can be used. The usage > + depends on the platform or board design. > + Please refer to Documentation/devicetree/bindings/graph.txt Please read what that file says now. > + > Pins on the device (for linking into audio routes) for RT5659/RT5658: > > * DMIC L1 > -- > 2.7.4 >
Hi Rob, On 2/5/2021 8:59 PM, Rob Herring wrote: > External email: Use caution opening links or attachments > > > On Fri, Jan 29, 2021 at 11:57:38PM +0530, Sameer Pujar wrote: >> Update following in rt5659.txt binding doc >> - Add JD source for Intel HDA header: Commit 041e74b71491 >> ("ASoC: rt5659: Add the support of Intel HDA Header") >> added driver support. Add missing info here. >> >> - sound-name-prefix: Used to prefix component widgets/kcontrols >> with given prefix. >> >> - ports: Helps to use the Codec with audio graph card >> >> Signed-off-by: Sameer Pujar <spujar@nvidia.com> >> Reported-by: Jon Hunter <jonathanh@nvidia.com> >> Cc: Oder Chiou <oder_chiou@realtek.com> >> Cc: Bard Liao <bardliao@realtek.com> >> --- >> Documentation/devicetree/bindings/sound/rt5659.txt | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt >> index 56788f5..c473df5 100644 >> --- a/Documentation/devicetree/bindings/sound/rt5659.txt >> +++ b/Documentation/devicetree/bindings/sound/rt5659.txt >> @@ -37,10 +37,21 @@ Optional properties: >> - realtek,jd-src >> 0: No JD is used >> 1: using JD3 as JD source >> + 2: JD source for Intel HDA header >> >> - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. >> - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin. >> >> +- sound-name-prefix: Please refer to name-prefix.txt >> + >> +- ports: A Codec may have a single or multiple I2S interfaces. These >> + interfaces on Codec side can be described under 'ports' or 'port'. >> + When the SoC or host device is connected to multiple interfaces of >> + the Codec, the connectivity can be described using 'ports' property. >> + If a single interface is used, then 'port' can be used. The usage >> + depends on the platform or board design. >> + Please refer to Documentation/devicetree/bindings/graph.txt > Please read what that file says now. Sorry, I did not understand above comment. Can you please elaborate a bit more?
On Tue, Feb 09, 2021 at 06:51:58PM +0530, Sameer Pujar wrote: > Hi Rob, > > On 2/5/2021 8:59 PM, Rob Herring wrote: > > External email: Use caution opening links or attachments > > > > > > On Fri, Jan 29, 2021 at 11:57:38PM +0530, Sameer Pujar wrote: > > > Update following in rt5659.txt binding doc > > > - Add JD source for Intel HDA header: Commit 041e74b71491 > > > ("ASoC: rt5659: Add the support of Intel HDA Header") > > > added driver support. Add missing info here. > > > > > > - sound-name-prefix: Used to prefix component widgets/kcontrols > > > with given prefix. > > > > > > - ports: Helps to use the Codec with audio graph card > > > > > > Signed-off-by: Sameer Pujar <spujar@nvidia.com> > > > Reported-by: Jon Hunter <jonathanh@nvidia.com> > > > Cc: Oder Chiou <oder_chiou@realtek.com> > > > Cc: Bard Liao <bardliao@realtek.com> > > > --- > > > Documentation/devicetree/bindings/sound/rt5659.txt | 11 +++++++++++ > > > 1 file changed, 11 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt > > > index 56788f5..c473df5 100644 > > > --- a/Documentation/devicetree/bindings/sound/rt5659.txt > > > +++ b/Documentation/devicetree/bindings/sound/rt5659.txt > > > @@ -37,10 +37,21 @@ Optional properties: > > > - realtek,jd-src > > > 0: No JD is used > > > 1: using JD3 as JD source > > > + 2: JD source for Intel HDA header > > > > > > - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. > > > - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin. > > > > > > +- sound-name-prefix: Please refer to name-prefix.txt > > > + > > > +- ports: A Codec may have a single or multiple I2S interfaces. These > > > + interfaces on Codec side can be described under 'ports' or 'port'. > > > + When the SoC or host device is connected to multiple interfaces of > > > + the Codec, the connectivity can be described using 'ports' property. > > > + If a single interface is used, then 'port' can be used. The usage > > > + depends on the platform or board design. > > > + Please refer to Documentation/devicetree/bindings/graph.txt > > Please read what that file says now. > > Sorry, I did not understand above comment. Can you please elaborate a bit > more? I think what Rob meant to point out is that graph.txt now contains a mention that the file has been moved to a more central location, which is the dt-schema repository. So instead of referencing the graph.txt, which then redirects to the graph.yaml in dt-schema, it'd be better to directly reference graph.yaml from dt-schema. That said, I'm not aware of a good or standard way to make such a reference. Perhaps in this case, given that the rt5659 binding is not very large, you can convert the file to json-schema first and then use standard json-schema references for this. Thierry
On 2/10/2021 12:49 AM, Thierry Reding wrote: > On Tue, Feb 09, 2021 at 06:51:58PM +0530, Sameer Pujar wrote: >> Hi Rob, >> >> On 2/5/2021 8:59 PM, Rob Herring wrote: >>> External email: Use caution opening links or attachments >>> >>> >>> On Fri, Jan 29, 2021 at 11:57:38PM +0530, Sameer Pujar wrote: >>>> Update following in rt5659.txt binding doc >>>> - Add JD source for Intel HDA header: Commit 041e74b71491 >>>> ("ASoC: rt5659: Add the support of Intel HDA Header") >>>> added driver support. Add missing info here. >>>> >>>> - sound-name-prefix: Used to prefix component widgets/kcontrols >>>> with given prefix. >>>> >>>> - ports: Helps to use the Codec with audio graph card >>>> >>>> Signed-off-by: Sameer Pujar <spujar@nvidia.com> >>>> Reported-by: Jon Hunter <jonathanh@nvidia.com> >>>> Cc: Oder Chiou <oder_chiou@realtek.com> >>>> Cc: Bard Liao <bardliao@realtek.com> >>>> --- >>>> Documentation/devicetree/bindings/sound/rt5659.txt | 11 +++++++++++ >>>> 1 file changed, 11 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt >>>> index 56788f5..c473df5 100644 >>>> --- a/Documentation/devicetree/bindings/sound/rt5659.txt >>>> +++ b/Documentation/devicetree/bindings/sound/rt5659.txt >>>> @@ -37,10 +37,21 @@ Optional properties: >>>> - realtek,jd-src >>>> 0: No JD is used >>>> 1: using JD3 as JD source >>>> + 2: JD source for Intel HDA header >>>> >>>> - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. >>>> - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin. >>>> >>>> +- sound-name-prefix: Please refer to name-prefix.txt >>>> + >>>> +- ports: A Codec may have a single or multiple I2S interfaces. These >>>> + interfaces on Codec side can be described under 'ports' or 'port'. >>>> + When the SoC or host device is connected to multiple interfaces of >>>> + the Codec, the connectivity can be described using 'ports' property. >>>> + If a single interface is used, then 'port' can be used. The usage >>>> + depends on the platform or board design. >>>> + Please refer to Documentation/devicetree/bindings/graph.txt >>> Please read what that file says now. >> Sorry, I did not understand above comment. Can you please elaborate a bit >> more? > I think what Rob meant to point out is that graph.txt now contains a > mention that the file has been moved to a more central location, which > is the dt-schema repository. So instead of referencing the graph.txt, > which then redirects to the graph.yaml in dt-schema, it'd be better to > directly reference graph.yaml from dt-schema. > > That said, I'm not aware of a good or standard way to make such a > reference. Perhaps in this case, given that the rt5659 binding is not > very large, you can convert the file to json-schema first and then use > standard json-schema references for this. OK, in that case I will try convert this binding to json-schema in a separate patch. Thanks.
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt index 56788f5..c473df5 100644 --- a/Documentation/devicetree/bindings/sound/rt5659.txt +++ b/Documentation/devicetree/bindings/sound/rt5659.txt @@ -37,10 +37,21 @@ Optional properties: - realtek,jd-src 0: No JD is used 1: using JD3 as JD source + 2: JD source for Intel HDA header - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin. +- sound-name-prefix: Please refer to name-prefix.txt + +- ports: A Codec may have a single or multiple I2S interfaces. These + interfaces on Codec side can be described under 'ports' or 'port'. + When the SoC or host device is connected to multiple interfaces of + the Codec, the connectivity can be described using 'ports' property. + If a single interface is used, then 'port' can be used. The usage + depends on the platform or board design. + Please refer to Documentation/devicetree/bindings/graph.txt + Pins on the device (for linking into audio routes) for RT5659/RT5658: * DMIC L1
Update following in rt5659.txt binding doc - Add JD source for Intel HDA header: Commit 041e74b71491 ("ASoC: rt5659: Add the support of Intel HDA Header") added driver support. Add missing info here. - sound-name-prefix: Used to prefix component widgets/kcontrols with given prefix. - ports: Helps to use the Codec with audio graph card Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reported-by: Jon Hunter <jonathanh@nvidia.com> Cc: Oder Chiou <oder_chiou@realtek.com> Cc: Bard Liao <bardliao@realtek.com> --- Documentation/devicetree/bindings/sound/rt5659.txt | 11 +++++++++++ 1 file changed, 11 insertions(+)