| Message ID | 20210211175015.200772-1-angelogioacchino.delregno@somainline.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for IPA v3.1, GSI v1.0, MSM8998 IPA | expand |
On 2/11/21 11:50 AM, AngeloGioacchino Del Regno wrote: > Hey all! > > This time around I thought that it would be nice to get some modem > action going on. We have it, it's working (ish), so just.. why not. Thank you for the patches! I would like to review these carefully but I'm sorry I won't be able to get to it today, and possibly not for a few days. But I *will* review them. I just want you to know I'm paying attention, though I'm sort of buried in an important issue right now. I'm very impressed at how small the patches are though. -Alex > This series adds support for IPA v3.1 (featuring GSI v1.0) and also > takes account for some bits that are shared with other unimplemented > IPA v3 variants and it is specifically targeting MSM8998, for which > support is added. > > Since the userspace isn't entirely ready (as far as I can see) for > data connection (3g/lte/whatever) through the modem, it was possible > to only partially test this series. > Specifically, loading the IPA firmware and setting up the interface > went just fine, along with a basic setup of the network interface > that got exposed by this driver. > > With this series, the benefits that I see are: > 1. The modem doesn't crash anymore when trying to setup a data > connection, as now the modem firmware seems to be happy with > having IPA initialized and ready; > 2. Other random modem crashes while picking up LTE home network > signal (even just for calling, nothing fancy) seem to be gone. > > These are the reasons why I think that this series is ready for > upstream action. It's *at least* stabilizing the platform when > the modem is up. > > This was tested on the F(x)Tec Pro 1 (MSM8998) smartphone. > > AngeloGioacchino Del Regno (7): > net: ipa: Add support for IPA v3.1 with GSI v1.0 > net: ipa: endpoint: Don't read unexistant register on IPAv3.1 > net: ipa: gsi: Avoid some writes during irq setup for older IPA > net: ipa: gsi: Use right masks for GSI v1.0 channels hw param > net: ipa: Add support for IPA on MSM8998 > dt-bindings: net: qcom-ipa: Document qcom,sc7180-ipa compatible > dt-bindings: net: qcom-ipa: Document qcom,msm8998-ipa compatible > > .../devicetree/bindings/net/qcom,ipa.yaml | 7 +- > drivers/net/ipa/Makefile | 3 +- > drivers/net/ipa/gsi.c | 33 +- > drivers/net/ipa/gsi_reg.h | 5 + > drivers/net/ipa/ipa_data-msm8998.c | 407 ++++++++++++++++++ > drivers/net/ipa/ipa_data.h | 5 + > drivers/net/ipa/ipa_endpoint.c | 26 +- > drivers/net/ipa/ipa_main.c | 12 +- > drivers/net/ipa/ipa_reg.h | 3 + > drivers/net/ipa/ipa_version.h | 1 + > 10 files changed, 480 insertions(+), 22 deletions(-) > create mode 100644 drivers/net/ipa/ipa_data-msm8998.c >
Il 11/02/21 21:27, Alex Elder ha scritto: > On 2/11/21 11:50 AM, AngeloGioacchino Del Regno wrote: >> Hey all! >> >> This time around I thought that it would be nice to get some modem >> action going on. We have it, it's working (ish), so just.. why not. > > Thank you for the patches! > > I would like to review these carefully but I'm sorry > I won't be able to get to it today, and possibly not > for a few days. But I *will* review them. > Don't worry :)) > I just want you to know I'm paying attention, though > I'm sort of buried in an important issue right now. > > I'm very impressed at how small the patches are though. Actually, the driver is in a great shape. That's why the patches are that small: thanks to you! -- Angelo > > -Alex > >> This series adds support for IPA v3.1 (featuring GSI v1.0) and also >> takes account for some bits that are shared with other unimplemented >> IPA v3 variants and it is specifically targeting MSM8998, for which >> support is added. >> >> Since the userspace isn't entirely ready (as far as I can see) for >> data connection (3g/lte/whatever) through the modem, it was possible >> to only partially test this series. >> Specifically, loading the IPA firmware and setting up the interface >> went just fine, along with a basic setup of the network interface >> that got exposed by this driver. >> >> With this series, the benefits that I see are: >> 1. The modem doesn't crash anymore when trying to setup a data >> connection, as now the modem firmware seems to be happy with >> having IPA initialized and ready; >> 2. Other random modem crashes while picking up LTE home network >> signal (even just for calling, nothing fancy) seem to be gone. >> >> These are the reasons why I think that this series is ready for >> upstream action. It's *at least* stabilizing the platform when >> the modem is up. >> >> This was tested on the F(x)Tec Pro 1 (MSM8998) smartphone. >> >> AngeloGioacchino Del Regno (7): >> net: ipa: Add support for IPA v3.1 with GSI v1.0 >> net: ipa: endpoint: Don't read unexistant register on IPAv3.1 >> net: ipa: gsi: Avoid some writes during irq setup for older IPA >> net: ipa: gsi: Use right masks for GSI v1.0 channels hw param >> net: ipa: Add support for IPA on MSM8998 >> dt-bindings: net: qcom-ipa: Document qcom,sc7180-ipa compatible >> dt-bindings: net: qcom-ipa: Document qcom,msm8998-ipa compatible >> >> .../devicetree/bindings/net/qcom,ipa.yaml | 7 +- >> drivers/net/ipa/Makefile | 3 +- >> drivers/net/ipa/gsi.c | 33 +- >> drivers/net/ipa/gsi_reg.h | 5 + >> drivers/net/ipa/ipa_data-msm8998.c | 407 ++++++++++++++++++ >> drivers/net/ipa/ipa_data.h | 5 + >> drivers/net/ipa/ipa_endpoint.c | 26 +- >> drivers/net/ipa/ipa_main.c | 12 +- >> drivers/net/ipa/ipa_reg.h | 3 + >> drivers/net/ipa/ipa_version.h | 1 + >> 10 files changed, 480 insertions(+), 22 deletions(-) >> create mode 100644 drivers/net/ipa/ipa_data-msm8998.c >> >
On 2/11/21 11:50 AM, AngeloGioacchino Del Regno wrote: > Hey all! > > This time around I thought that it would be nice to get some modem > action going on. We have it, it's working (ish), so just.. why not. > > This series adds support for IPA v3.1 (featuring GSI v1.0) and also > takes account for some bits that are shared with other unimplemented > IPA v3 variants and it is specifically targeting MSM8998, for which > support is added. It was more like "next month" rather than "next week," but I finally took some more time to look at this today. Again I think it's surprising how little code you had to implement to get something that seems is at least modestly functional. FYI I have undertaken an effort to make the upstream code suitable for use for any IPA version (3.0-4.11) in the past few months. Most of what I've done is in line with the things you found were necessary for IPA v3.1 support. Early on I got most of the support for IPA v4.5 upstream, and have been holding off trying to get other similar changes out for review for other versions until I've had more of a chance to test some of what's new in IPA v4.5. In the coming weeks I will start posting more of this work for review. You'll see that I'm modifying many things you do in your series (such as making version checks not assume only v3.5.1 and v4.2 are supported). My priority is on newer versions, but I want the code to be (at least) correct for IPA v3.0, v3.1, and v3.5 as well. What might be best is for you to consider using the patches when I send them out. I'll gladly give you some credit when I do if you like (suggested-by, reviewed-by, tested-by, whatever you feel is appropriate). Please let me know if you would like to be on the Cc list for this sort of change. > Since the userspace isn't entirely ready (as far as I can see) for > data connection (3g/lte/whatever) through the modem, it was possible > to only partially test this series. Yes we're still figuring out how the upstream tools need to interact with the kernel for configuration. > Specifically, loading the IPA firmware and setting up the interface > went just fine, along with a basic setup of the network interface > that got exposed by this driver. This is great to hear. > With this series, the benefits that I see are: > 1. The modem doesn't crash anymore when trying to setup a data > connection, as now the modem firmware seems to be happy with > having IPA initialized and ready; > 2. Other random modem crashes while picking up LTE home network > signal (even just for calling, nothing fancy) seem to be gone. > > These are the reasons why I think that this series is ready for > upstream action. It's *at least* stabilizing the platform when > the modem is up. > > This was tested on the F(x)Tec Pro 1 (MSM8998) smartphone. I unfortunately can't promise you you'll have the full connection up and running, but we can probably get very close. It would be very helpful for you (someone other than me, that is) to participate in validating the changes I am now finalizing. I hope you're willing. I'll offer a few more specific comments on each of your patches. -Alex > AngeloGioacchino Del Regno (7): > net: ipa: Add support for IPA v3.1 with GSI v1.0 > net: ipa: endpoint: Don't read unexistant register on IPAv3.1 > net: ipa: gsi: Avoid some writes during irq setup for older IPA > net: ipa: gsi: Use right masks for GSI v1.0 channels hw param > net: ipa: Add support for IPA on MSM8998 > dt-bindings: net: qcom-ipa: Document qcom,sc7180-ipa compatible > dt-bindings: net: qcom-ipa: Document qcom,msm8998-ipa compatible > > .../devicetree/bindings/net/qcom,ipa.yaml | 7 +- > drivers/net/ipa/Makefile | 3 +- > drivers/net/ipa/gsi.c | 33 +- > drivers/net/ipa/gsi_reg.h | 5 + > drivers/net/ipa/ipa_data-msm8998.c | 407 ++++++++++++++++++ > drivers/net/ipa/ipa_data.h | 5 + > drivers/net/ipa/ipa_endpoint.c | 26 +- > drivers/net/ipa/ipa_main.c | 12 +- > drivers/net/ipa/ipa_reg.h | 3 + > drivers/net/ipa/ipa_version.h | 1 + > 10 files changed, 480 insertions(+), 22 deletions(-) > create mode 100644 drivers/net/ipa/ipa_data-msm8998.c >
On 2/11/21 11:50 AM, AngeloGioacchino Del Regno wrote: > Hey all! > > This time around I thought that it would be nice to get some modem > action going on. We have it, it's working (ish), so just.. why not. When I reviewed this series in March, I said I wanted to post a bunch of patches I had already been working on, which enabled support for many versions of IPA, including IPA v3.1. That work is complete now, so I'm returning to your series and seeing if there is anything you included in your patches that I did not. There are a few differences, which I will point out in a new set of responses to your original patches. I will be posting some updates, and will explain what I intend to do in those updates in the messages that follow. -Alex > This series adds support for IPA v3.1 (featuring GSI v1.0) and also > takes account for some bits that are shared with other unimplemented > IPA v3 variants and it is specifically targeting MSM8998, for which > support is added. > > Since the userspace isn't entirely ready (as far as I can see) for > data connection (3g/lte/whatever) through the modem, it was possible > to only partially test this series. > Specifically, loading the IPA firmware and setting up the interface > went just fine, along with a basic setup of the network interface > that got exposed by this driver. > > With this series, the benefits that I see are: > 1. The modem doesn't crash anymore when trying to setup a data > connection, as now the modem firmware seems to be happy with > having IPA initialized and ready; > 2. Other random modem crashes while picking up LTE home network > signal (even just for calling, nothing fancy) seem to be gone. > > These are the reasons why I think that this series is ready for > upstream action. It's *at least* stabilizing the platform when > the modem is up. > > This was tested on the F(x)Tec Pro 1 (MSM8998) smartphone. > > AngeloGioacchino Del Regno (7): > net: ipa: Add support for IPA v3.1 with GSI v1.0 > net: ipa: endpoint: Don't read unexistant register on IPAv3.1 > net: ipa: gsi: Avoid some writes during irq setup for older IPA > net: ipa: gsi: Use right masks for GSI v1.0 channels hw param > net: ipa: Add support for IPA on MSM8998 > dt-bindings: net: qcom-ipa: Document qcom,sc7180-ipa compatible > dt-bindings: net: qcom-ipa: Document qcom,msm8998-ipa compatible > > .../devicetree/bindings/net/qcom,ipa.yaml | 7 +- > drivers/net/ipa/Makefile | 3 +- > drivers/net/ipa/gsi.c | 33 +- > drivers/net/ipa/gsi_reg.h | 5 + > drivers/net/ipa/ipa_data-msm8998.c | 407 ++++++++++++++++++ > drivers/net/ipa/ipa_data.h | 5 + > drivers/net/ipa/ipa_endpoint.c | 26 +- > drivers/net/ipa/ipa_main.c | 12 +- > drivers/net/ipa/ipa_reg.h | 3 + > drivers/net/ipa/ipa_version.h | 1 + > 10 files changed, 480 insertions(+), 22 deletions(-) > create mode 100644 drivers/net/ipa/ipa_data-msm8998.c >
Hey all! This time around I thought that it would be nice to get some modem action going on. We have it, it's working (ish), so just.. why not. This series adds support for IPA v3.1 (featuring GSI v1.0) and also takes account for some bits that are shared with other unimplemented IPA v3 variants and it is specifically targeting MSM8998, for which support is added. Since the userspace isn't entirely ready (as far as I can see) for data connection (3g/lte/whatever) through the modem, it was possible to only partially test this series. Specifically, loading the IPA firmware and setting up the interface went just fine, along with a basic setup of the network interface that got exposed by this driver. With this series, the benefits that I see are: 1. The modem doesn't crash anymore when trying to setup a data connection, as now the modem firmware seems to be happy with having IPA initialized and ready; 2. Other random modem crashes while picking up LTE home network signal (even just for calling, nothing fancy) seem to be gone. These are the reasons why I think that this series is ready for upstream action. It's *at least* stabilizing the platform when the modem is up. This was tested on the F(x)Tec Pro 1 (MSM8998) smartphone. AngeloGioacchino Del Regno (7): net: ipa: Add support for IPA v3.1 with GSI v1.0 net: ipa: endpoint: Don't read unexistant register on IPAv3.1 net: ipa: gsi: Avoid some writes during irq setup for older IPA net: ipa: gsi: Use right masks for GSI v1.0 channels hw param net: ipa: Add support for IPA on MSM8998 dt-bindings: net: qcom-ipa: Document qcom,sc7180-ipa compatible dt-bindings: net: qcom-ipa: Document qcom,msm8998-ipa compatible .../devicetree/bindings/net/qcom,ipa.yaml | 7 +- drivers/net/ipa/Makefile | 3 +- drivers/net/ipa/gsi.c | 33 +- drivers/net/ipa/gsi_reg.h | 5 + drivers/net/ipa/ipa_data-msm8998.c | 407 ++++++++++++++++++ drivers/net/ipa/ipa_data.h | 5 + drivers/net/ipa/ipa_endpoint.c | 26 +- drivers/net/ipa/ipa_main.c | 12 +- drivers/net/ipa/ipa_reg.h | 3 + drivers/net/ipa/ipa_version.h | 1 + 10 files changed, 480 insertions(+), 22 deletions(-) create mode 100644 drivers/net/ipa/ipa_data-msm8998.c