| Message ID | 1604419306-26105-3-git-send-email-sumit.garg@linaro.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Introduce TEE based Trusted Keys support | expand |
On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > Add support for TEE based trusted keys where TEE provides the functionality > to seal and unseal trusted keys using hardware unique key. > > Refer to Documentation/tee.txt for detailed information about TEE. > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > --- > include/keys/trusted_tee.h | 55 ++++++ > security/keys/trusted-keys/Makefile | 1 + > security/keys/trusted-keys/trusted_core.c | 4 + > security/keys/trusted-keys/trusted_tee.c | 278 ++++++++++++++++++++++++++++++ > 4 files changed, 338 insertions(+) > create mode 100644 include/keys/trusted_tee.h > create mode 100644 security/keys/trusted-keys/trusted_tee.c > > diff --git a/include/keys/trusted_tee.h b/include/keys/trusted_tee.h > new file mode 100644 > index 0000000..2e2bb15 > --- /dev/null > +++ b/include/keys/trusted_tee.h > @@ -0,0 +1,55 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (C) 2019-2020 Linaro Ltd. > + * > + * Author: > + * Sumit Garg <sumit.garg@linaro.org> > + */ > + > +#ifndef __TEE_TRUSTED_KEY_H > +#define __TEE_TRUSTED_KEY_H > + > +#include <linux/tee_drv.h> > + > +#define DRIVER_NAME "tee-trusted-key" > + > +/* > + * Get random data for symmetric key > + * > + * [out] memref[0] Random data > + */ > +#define TA_CMD_GET_RANDOM 0x0 > + > +/* > + * Seal trusted key using hardware unique key > + * > + * [in] memref[0] Plain key > + * [out] memref[1] Sealed key datablob > + */ > +#define TA_CMD_SEAL 0x1 > + > +/* > + * Unseal trusted key using hardware unique key > + * > + * [in] memref[0] Sealed key datablob > + * [out] memref[1] Plain key > + */ > +#define TA_CMD_UNSEAL 0x2 > + > +/** > + * struct trusted_key_private - TEE Trusted key private data > + * @dev: TEE based Trusted key device. > + * @ctx: TEE context handler. > + * @session_id: Trusted key TA session identifier. > + * @shm_pool: Memory pool shared with TEE device. > + */ > +struct trusted_key_private { > + struct device *dev; > + struct tee_context *ctx; > + u32 session_id; > + struct tee_shm *shm_pool; > +}; > + > +extern struct trusted_key_ops tee_trusted_key_ops; > + > +#endif > diff --git a/security/keys/trusted-keys/Makefile b/security/keys/trusted-keys/Makefile > index 49e3bcf..012dd78 100644 > --- a/security/keys/trusted-keys/Makefile > +++ b/security/keys/trusted-keys/Makefile > @@ -7,3 +7,4 @@ obj-$(CONFIG_TRUSTED_KEYS) += trusted.o > trusted-y += trusted_core.o > trusted-y += trusted_tpm1.o > trusted-y += trusted_tpm2.o > +trusted-y += trusted_tee.o > diff --git a/security/keys/trusted-keys/trusted_core.c b/security/keys/trusted-keys/trusted_core.c > index aa4f2a0..15b1b0f3 100644 > --- a/security/keys/trusted-keys/trusted_core.c > +++ b/security/keys/trusted-keys/trusted_core.c > @@ -8,6 +8,7 @@ > > #include <keys/user-type.h> > #include <keys/trusted-type.h> > +#include <keys/trusted_tee.h> > #include <keys/trusted_tpm.h> > #include <linux/capability.h> > #include <linux/err.h> > @@ -29,6 +30,9 @@ static const struct trusted_key_source trusted_key_sources[] = { > #if defined(CONFIG_TCG_TPM) > { "tpm", &tpm_trusted_key_ops }, > #endif > +#if defined(CONFIG_TEE) > + { "tee", &tee_trusted_key_ops }, > +#endif > }; > > DEFINE_STATIC_CALL_NULL(trusted_key_init, *trusted_key_sources[0].ops->init); > diff --git a/security/keys/trusted-keys/trusted_tee.c b/security/keys/trusted-keys/trusted_tee.c > new file mode 100644 > index 0000000..da8785a > --- /dev/null > +++ b/security/keys/trusted-keys/trusted_tee.c > @@ -0,0 +1,278 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019-2020 Linaro Ltd. > + * > + * Author: > + * Sumit Garg <sumit.garg@linaro.org> > + */ > + > +#include <linux/err.h> > +#include <linux/key-type.h> > +#include <linux/slab.h> > +#include <linux/string.h> > +#include <linux/uuid.h> > + > +#include <keys/trusted-type.h> > +#include <keys/trusted_tee.h> > + > +static struct trusted_key_private pvt_data; > + > +/* > + * Have the TEE seal(encrypt) the symmetric key > + */ > +static int trusted_tee_seal(struct trusted_key_payload *p, char *datablob) > +{ > + int ret; > + struct tee_ioctl_invoke_arg inv_arg; > + struct tee_param param[4]; > + struct tee_shm *reg_shm_in = NULL, *reg_shm_out = NULL; > + > + memset(&inv_arg, 0, sizeof(inv_arg)); > + memset(¶m, 0, sizeof(param)); > + > + reg_shm_in = tee_shm_register(pvt_data.ctx, (unsigned long)p->key, > + p->key_len, TEE_SHM_DMA_BUF | > + TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm_in)) { > + dev_err(pvt_data.dev, "key shm register failed\n"); > + return PTR_ERR(reg_shm_in); > + } > + > + reg_shm_out = tee_shm_register(pvt_data.ctx, (unsigned long)p->blob, > + sizeof(p->blob), TEE_SHM_DMA_BUF | > + TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm_out)) { > + dev_err(pvt_data.dev, "blob shm register failed\n"); > + ret = PTR_ERR(reg_shm_out); > + goto out; > + } > + > + inv_arg.func = TA_CMD_SEAL; > + inv_arg.session = pvt_data.session_id; > + inv_arg.num_params = 4; > + > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; > + param[0].u.memref.shm = reg_shm_in; > + param[0].u.memref.size = p->key_len; > + param[0].u.memref.shm_offs = 0; > + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; > + param[1].u.memref.shm = reg_shm_out; > + param[1].u.memref.size = sizeof(p->blob); > + param[1].u.memref.shm_offs = 0; > + > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + dev_err(pvt_data.dev, "TA_CMD_SEAL invoke err: %x\n", > + inv_arg.ret); > + ret = -EFAULT; > + } else { > + p->blob_len = param[1].u.memref.size; > + } > + > +out: > + if (reg_shm_out) > + tee_shm_free(reg_shm_out); > + if (reg_shm_in) > + tee_shm_free(reg_shm_in); > + > + return ret; > +} > + > +/* > + * Have the TEE unseal(decrypt) the symmetric key > + */ > +static int trusted_tee_unseal(struct trusted_key_payload *p, char *datablob) > +{ > + int ret; > + struct tee_ioctl_invoke_arg inv_arg; > + struct tee_param param[4]; > + struct tee_shm *reg_shm_in = NULL, *reg_shm_out = NULL; > + > + memset(&inv_arg, 0, sizeof(inv_arg)); > + memset(¶m, 0, sizeof(param)); > + > + reg_shm_in = tee_shm_register(pvt_data.ctx, (unsigned long)p->blob, > + p->blob_len, TEE_SHM_DMA_BUF | > + TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm_in)) { > + dev_err(pvt_data.dev, "blob shm register failed\n"); > + return PTR_ERR(reg_shm_in); > + } > + > + reg_shm_out = tee_shm_register(pvt_data.ctx, (unsigned long)p->key, > + sizeof(p->key), TEE_SHM_DMA_BUF | > + TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm_out)) { > + dev_err(pvt_data.dev, "key shm register failed\n"); > + ret = PTR_ERR(reg_shm_out); > + goto out; > + } > + > + inv_arg.func = TA_CMD_UNSEAL; > + inv_arg.session = pvt_data.session_id; > + inv_arg.num_params = 4; > + > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; > + param[0].u.memref.shm = reg_shm_in; > + param[0].u.memref.size = p->blob_len; > + param[0].u.memref.shm_offs = 0; > + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; > + param[1].u.memref.shm = reg_shm_out; > + param[1].u.memref.size = sizeof(p->key); > + param[1].u.memref.shm_offs = 0; > + > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + dev_err(pvt_data.dev, "TA_CMD_UNSEAL invoke err: %x\n", > + inv_arg.ret); > + ret = -EFAULT; > + } else { > + p->key_len = param[1].u.memref.size; > + } > + > +out: > + if (reg_shm_out) > + tee_shm_free(reg_shm_out); > + if (reg_shm_in) > + tee_shm_free(reg_shm_in); > + > + return ret; > +} > + > +/* > + * Have the TEE generate random symmetric key > + */ > +static int trusted_tee_get_random(unsigned char *key, size_t key_len) > +{ > + int ret; > + struct tee_ioctl_invoke_arg inv_arg; > + struct tee_param param[4]; > + struct tee_shm *reg_shm = NULL; > + > + memset(&inv_arg, 0, sizeof(inv_arg)); > + memset(¶m, 0, sizeof(param)); > + > + reg_shm = tee_shm_register(pvt_data.ctx, (unsigned long)key, key_len, > + TEE_SHM_DMA_BUF | TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm)) { > + dev_err(pvt_data.dev, "key shm register failed\n"); > + return PTR_ERR(reg_shm); > + } > + > + inv_arg.func = TA_CMD_GET_RANDOM; > + inv_arg.session = pvt_data.session_id; > + inv_arg.num_params = 4; > + > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; > + param[0].u.memref.shm = reg_shm; > + param[0].u.memref.size = key_len; > + param[0].u.memref.shm_offs = 0; > + > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + dev_err(pvt_data.dev, "TA_CMD_GET_RANDOM invoke err: %x\n", > + inv_arg.ret); > + ret = -EFAULT; > + } else { > + ret = param[0].u.memref.size; > + } > + > + tee_shm_free(reg_shm); > + > + return ret; > +} > + > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > +{ > + if (ver->impl_id == TEE_IMPL_ID_OPTEE) > + return 1; > + else > + return 0; > +} > + > +static int trusted_key_probe(struct device *dev) > +{ > + struct tee_client_device *rng_device = to_tee_client_device(dev); > + int ret; > + struct tee_ioctl_open_session_arg sess_arg; > + > + memset(&sess_arg, 0, sizeof(sess_arg)); > + > + pvt_data.ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, > + NULL); > + if (IS_ERR(pvt_data.ctx)) > + return -ENODEV; > + > + memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN); > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; > + sess_arg.num_params = 0; > + > + ret = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL); > + if ((ret < 0) || (sess_arg.ret != 0)) { > + dev_err(dev, "tee_client_open_session failed, err: %x\n", > + sess_arg.ret); > + ret = -EINVAL; > + goto out_ctx; > + } > + pvt_data.session_id = sess_arg.session; > + > + ret = register_key_type(&key_type_trusted); > + if (ret < 0) > + goto out_sess; > + > + pvt_data.dev = dev; > + > + return 0; > + > +out_sess: > + tee_client_close_session(pvt_data.ctx, pvt_data.session_id); > +out_ctx: > + tee_client_close_context(pvt_data.ctx); > + > + return ret; > +} > + > +static int trusted_key_remove(struct device *dev) > +{ > + unregister_key_type(&key_type_trusted); > + tee_client_close_session(pvt_data.ctx, pvt_data.session_id); > + tee_client_close_context(pvt_data.ctx); > + > + return 0; > +} > + > +static const struct tee_client_device_id trusted_key_id_table[] = { > + {UUID_INIT(0xf04a0fe7, 0x1f5d, 0x4b9b, > + 0xab, 0xf7, 0x61, 0x9b, 0x85, 0xb4, 0xce, 0x8c)}, > + {} > +}; > +MODULE_DEVICE_TABLE(tee, trusted_key_id_table); > + > +static struct tee_client_driver trusted_key_driver = { > + .id_table = trusted_key_id_table, > + .driver = { > + .name = DRIVER_NAME, > + .bus = &tee_bus_type, > + .probe = trusted_key_probe, > + .remove = trusted_key_remove, > + }, > +}; > + > +static int trusted_tee_init(void) > +{ > + return driver_register(&trusted_key_driver.driver); > +} > + > +static void trusted_tee_exit(void) > +{ > + driver_unregister(&trusted_key_driver.driver); > +} > + > +struct trusted_key_ops tee_trusted_key_ops = { Nit: trusted_key_tee_ops > + .migratable = 0, /* non-migratable */ > + .init = trusted_tee_init, > + .seal = trusted_tee_seal, > + .unseal = trusted_tee_unseal, > + .get_random = trusted_tee_get_random, > + .exit = trusted_tee_exit, > +}; > -- > 2.7.4 > > /Jarkko
On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > Add support for TEE based trusted keys where TEE provides the functionality > to seal and unseal trusted keys using hardware unique key. > > Refer to Documentation/tee.txt for detailed information about TEE. > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> I haven't yet got QEMU environment working with aarch64, this produces just a blank screen: ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio My BuildRoot fork for TPM and keyring testing is located over here: https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ The "ARM version" is at this point in aarch64 branch. Over time I will define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then in the master branch. To create identical images you just need to $ make tpmdd_defconfig && make Can you check if you see anything obviously wrong? I'm eager to test this patch set, and in bigger picture I really need to have ready to run aarch64 environment available. /Jarkko
Hi Jarkko, On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > Add support for TEE based trusted keys where TEE provides the functionality > > to seal and unseal trusted keys using hardware unique key. > > > > Refer to Documentation/tee.txt for detailed information about TEE. > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > I haven't yet got QEMU environment working with aarch64, this produces > just a blank screen: > > ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > My BuildRoot fork for TPM and keyring testing is located over here: > > https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > The "ARM version" is at this point in aarch64 branch. Over time I will > define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > in the master branch. > > To create identical images you just need to > > $ make tpmdd_defconfig && make > > Can you check if you see anything obviously wrong? I'm eager to test this > patch set, and in bigger picture I really need to have ready to run > aarch64 environment available. I would rather suggest you to follow steps listed here [1] as to test this feature on Qemu aarch64 we need to build firmwares such as TF-A, OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build system [2]. And then it would be easier to migrate them to your buildroot environment as well. [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 -Sumit > > /Jarkko
On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > Hi Jarkko, > > On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > Add support for TEE based trusted keys where TEE provides the functionality > > > to seal and unseal trusted keys using hardware unique key. > > > > > > Refer to Documentation/tee.txt for detailed information about TEE. > > > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > I haven't yet got QEMU environment working with aarch64, this produces > > just a blank screen: > > > > ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > My BuildRoot fork for TPM and keyring testing is located over here: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > The "ARM version" is at this point in aarch64 branch. Over time I will > > define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > in the master branch. > > > > To create identical images you just need to > > > > $ make tpmdd_defconfig && make > > > > Can you check if you see anything obviously wrong? I'm eager to test this > > patch set, and in bigger picture I really need to have ready to run > > aarch64 environment available. > > I would rather suggest you to follow steps listed here [1] as to test > this feature on Qemu aarch64 we need to build firmwares such as TF-A, > OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > system [2]. And then it would be easier to migrate them to your > buildroot environment as well. > > [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > -Sumit Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. After I've successfully tested 2/4, I'd suggest that you roll out one more version and CC the documentation patch to Elaine and Mini, and clearly remark in the commit message that TEE is a standard, with a link to the specification. /Jarkko
On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > Hi Jarkko, > > > > On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > Add support for TEE based trusted keys where TEE provides the functionality > > > > to seal and unseal trusted keys using hardware unique key. > > > > > > > > Refer to Documentation/tee.txt for detailed information about TEE. > > > > > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > > I haven't yet got QEMU environment working with aarch64, this produces > > > just a blank screen: > > > > > > ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > > > My BuildRoot fork for TPM and keyring testing is located over here: > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > > > The "ARM version" is at this point in aarch64 branch. Over time I will > > > define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > in the master branch. > > > > > > To create identical images you just need to > > > > > > $ make tpmdd_defconfig && make > > > > > > Can you check if you see anything obviously wrong? I'm eager to test this > > > patch set, and in bigger picture I really need to have ready to run > > > aarch64 environment available. > > > > I would rather suggest you to follow steps listed here [1] as to test > > this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > system [2]. And then it would be easier to migrate them to your > > buildroot environment as well. > > > > [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > -Sumit > > Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > $ cat keyctl_change diff --git a/common.mk b/common.mk index aeb7b41..663e528 100644 --- a/common.mk +++ b/common.mk @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) BR2_PACKAGE_STRACE ?= y BR2_TARGET_GENERIC_GETTY_PORT ?= $(if $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) +BR2_PACKAGE_KEYUTILS := y # All BR2_* variables from the makefile or the environment are appended to # ../out-br/extra.conf. All values are quoted "..." except y and n. diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf index 368c18a..832ab74 100644 --- a/kconfigs/qemu.conf +++ b/kconfigs/qemu.conf @@ -20,3 +20,5 @@ CONFIG_9P_FS=y CONFIG_9P_FS_POSIX_ACL=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_TRUSTED_KEYS=y +CONFIG_ENCRYPTED_KEYS=y > After I've successfully tested 2/4, I'd suggest that you roll out one more > version and CC the documentation patch to Elaine and Mini, and clearly > remark in the commit message that TEE is a standard, with a link to the > specification. > Sure, I will roll out the next version after your testing. -Sumit > /Jarkko
On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > Hi Jarkko, > > > > > > On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > > Add support for TEE based trusted keys where TEE provides the functionality > > > > > to seal and unseal trusted keys using hardware unique key. > > > > > > > > > > Refer to Documentation/tee.txt for detailed information about TEE. > > > > > > > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > > > > I haven't yet got QEMU environment working with aarch64, this produces > > > > just a blank screen: > > > > > > > > ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > > > > > My BuildRoot fork for TPM and keyring testing is located over here: > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > > > > > The "ARM version" is at this point in aarch64 branch. Over time I will > > > > define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > in the master branch. > > > > > > > > To create identical images you just need to > > > > > > > > $ make tpmdd_defconfig && make > > > > > > > > Can you check if you see anything obviously wrong? I'm eager to test this > > > > patch set, and in bigger picture I really need to have ready to run > > > > aarch64 environment available. > > > > > > I would rather suggest you to follow steps listed here [1] as to test > > > this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > system [2]. And then it would be easier to migrate them to your > > > buildroot environment as well. > > > > > > [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > > > -Sumit > > > > Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > $ cat keyctl_change > diff --git a/common.mk b/common.mk > index aeb7b41..663e528 100644 > --- a/common.mk > +++ b/common.mk > @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > BR2_PACKAGE_STRACE ?= y > BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > +BR2_PACKAGE_KEYUTILS := y > > # All BR2_* variables from the makefile or the environment are appended to > # ../out-br/extra.conf. All values are quoted "..." except y and n. > diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > index 368c18a..832ab74 100644 > --- a/kconfigs/qemu.conf > +++ b/kconfigs/qemu.conf > @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > CONFIG_9P_FS_POSIX_ACL=y > CONFIG_HW_RANDOM=y > CONFIG_HW_RANDOM_VIRTIO=y > +CONFIG_TRUSTED_KEYS=y > +CONFIG_ENCRYPTED_KEYS=y > > > After I've successfully tested 2/4, I'd suggest that you roll out one more > > version and CC the documentation patch to Elaine and Mini, and clearly > > remark in the commit message that TEE is a standard, with a link to the > > specification. > > > > Sure, I will roll out the next version after your testing. Thanks, I'll try this at instant, and give my feedback. /Jarkko
On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > > Hi Jarkko, > > > > > > > > On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > > > On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > > > Add support for TEE based trusted keys where TEE provides the functionality > > > > > > to seal and unseal trusted keys using hardware unique key. > > > > > > > > > > > > Refer to Documentation/tee.txt for detailed information about TEE. > > > > > > > > > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > > > > > > I haven't yet got QEMU environment working with aarch64, this produces > > > > > just a blank screen: > > > > > > > > > > ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > > > > > > > My BuildRoot fork for TPM and keyring testing is located over here: > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > > > > > > > The "ARM version" is at this point in aarch64 branch. Over time I will > > > > > define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > > in the master branch. > > > > > > > > > > To create identical images you just need to > > > > > > > > > > $ make tpmdd_defconfig && make > > > > > > > > > > Can you check if you see anything obviously wrong? I'm eager to test this > > > > > patch set, and in bigger picture I really need to have ready to run > > > > > aarch64 environment available. > > > > > > > > I would rather suggest you to follow steps listed here [1] as to test > > > > this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > > OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > > system [2]. And then it would be easier to migrate them to your > > > > buildroot environment as well. > > > > > > > > [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > > [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > > > > > -Sumit > > > > > > Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > > > > $ cat keyctl_change > > diff --git a/common.mk b/common.mk > > index aeb7b41..663e528 100644 > > --- a/common.mk > > +++ b/common.mk > > @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > BR2_PACKAGE_STRACE ?= y > > BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > +BR2_PACKAGE_KEYUTILS := y > > > > # All BR2_* variables from the makefile or the environment are appended to > > # ../out-br/extra.conf. All values are quoted "..." except y and n. > > diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > index 368c18a..832ab74 100644 > > --- a/kconfigs/qemu.conf > > +++ b/kconfigs/qemu.conf > > @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > CONFIG_9P_FS_POSIX_ACL=y > > CONFIG_HW_RANDOM=y > > CONFIG_HW_RANDOM_VIRTIO=y > > +CONFIG_TRUSTED_KEYS=y > > +CONFIG_ENCRYPTED_KEYS=y > > > > > After I've successfully tested 2/4, I'd suggest that you roll out one more > > > version and CC the documentation patch to Elaine and Mini, and clearly > > > remark in the commit message that TEE is a standard, with a link to the > > > specification. > > > > > > > Sure, I will roll out the next version after your testing. > > Thanks, I'll try this at instant, and give my feedback. I bump into this: $ make run-only ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory make: *** [Makefile:194: run-only] Error 1 /Jarkko
On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > > > Hi Jarkko, > > > > > > > > > > On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > > > > > On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > > > > Add support for TEE based trusted keys where TEE provides the functionality > > > > > > > to seal and unseal trusted keys using hardware unique key. > > > > > > > > > > > > > > Refer to Documentation/tee.txt for detailed information about TEE. > > > > > > > > > > > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > > > > > > > > I haven't yet got QEMU environment working with aarch64, this produces > > > > > > just a blank screen: > > > > > > > > > > > > ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > > > > > > > > > My BuildRoot fork for TPM and keyring testing is located over here: > > > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > > > > > > > > > The "ARM version" is at this point in aarch64 branch. Over time I will > > > > > > define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > > > in the master branch. > > > > > > > > > > > > To create identical images you just need to > > > > > > > > > > > > $ make tpmdd_defconfig && make > > > > > > > > > > > > Can you check if you see anything obviously wrong? I'm eager to test this > > > > > > patch set, and in bigger picture I really need to have ready to run > > > > > > aarch64 environment available. > > > > > > > > > > I would rather suggest you to follow steps listed here [1] as to test > > > > > this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > > > OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > > > system [2]. And then it would be easier to migrate them to your > > > > > buildroot environment as well. > > > > > > > > > > [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > > > [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > > > > > > > -Sumit > > > > > > > > Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > > > > > > > $ cat keyctl_change > > > diff --git a/common.mk b/common.mk > > > index aeb7b41..663e528 100644 > > > --- a/common.mk > > > +++ b/common.mk > > > @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > BR2_PACKAGE_STRACE ?= y > > > BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > +BR2_PACKAGE_KEYUTILS := y > > > > > > # All BR2_* variables from the makefile or the environment are appended to > > > # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > index 368c18a..832ab74 100644 > > > --- a/kconfigs/qemu.conf > > > +++ b/kconfigs/qemu.conf > > > @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > CONFIG_9P_FS_POSIX_ACL=y > > > CONFIG_HW_RANDOM=y > > > CONFIG_HW_RANDOM_VIRTIO=y > > > +CONFIG_TRUSTED_KEYS=y > > > +CONFIG_ENCRYPTED_KEYS=y > > > > > > > After I've successfully tested 2/4, I'd suggest that you roll out one more > > > > version and CC the documentation patch to Elaine and Mini, and clearly > > > > remark in the commit message that TEE is a standard, with a link to the > > > > specification. > > > > > > > > > > Sure, I will roll out the next version after your testing. > > > > Thanks, I'll try this at instant, and give my feedback. > > I bump into this: > > $ make run-only > ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > make: *** [Makefile:194: run-only] Error 1 > Could you check if the following directory tree is built after executing the below command? $ make -j`nproc` CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c $ tree out/bin/ out/bin/ ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin ├── bl31.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin ├── bl32.bin -> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin ├── bl32_extra1.bin -> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin ├── bl32_extra2.bin -> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin ├── bl33.bin -> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image └── rootfs.cpio.gz -> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz 0 directories, 9 files -Sumit > /Jarkko
Hello Sumit, On 03.11.20 17:01, Sumit Garg wrote: > Add support for TEE based trusted keys where TEE provides the functionality > to seal and unseal trusted keys using hardware unique key. > > Refer to Documentation/tee.txt for detailed information about TEE. > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > --- > include/keys/trusted_tee.h | 55 ++++++ > security/keys/trusted-keys/Makefile | 1 + > security/keys/trusted-keys/trusted_core.c | 4 + > security/keys/trusted-keys/trusted_tee.c | 278 ++++++++++++++++++++++++++++++ > 4 files changed, 338 insertions(+) > create mode 100644 include/keys/trusted_tee.h > create mode 100644 security/keys/trusted-keys/trusted_tee.c > > diff --git a/include/keys/trusted_tee.h b/include/keys/trusted_tee.h > new file mode 100644 > index 0000000..2e2bb15 > --- /dev/null > +++ b/include/keys/trusted_tee.h > @@ -0,0 +1,55 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (C) 2019-2020 Linaro Ltd. > + * > + * Author: > + * Sumit Garg <sumit.garg@linaro.org> > + */ > + > +#ifndef __TEE_TRUSTED_KEY_H > +#define __TEE_TRUSTED_KEY_H > + > +#include <linux/tee_drv.h> > + > +#define DRIVER_NAME "tee-trusted-key" Looks unusual to define this in a header, especially when it's included in trusted_core.c as well. Could you move it? > + > +/* > + * Get random data for symmetric key > + * > + * [out] memref[0] Random data > + */ > +#define TA_CMD_GET_RANDOM 0x0 > + > +/* > + * Seal trusted key using hardware unique key > + * > + * [in] memref[0] Plain key > + * [out] memref[1] Sealed key datablob > + */ > +#define TA_CMD_SEAL 0x1 > + > +/* > + * Unseal trusted key using hardware unique key > + * > + * [in] memref[0] Sealed key datablob > + * [out] memref[1] Plain key > + */ > +#define TA_CMD_UNSEAL 0x2 These also look like implementation-specific stuff that should go into trusted_tee.c? > + > +/** > + * struct trusted_key_private - TEE Trusted key private data > + * @dev: TEE based Trusted key device. > + * @ctx: TEE context handler. > + * @session_id: Trusted key TA session identifier. > + * @shm_pool: Memory pool shared with TEE device. > + */ > +struct trusted_key_private { This is name is a bit too generic. Either move it to trusted_tee or put a caam_ prefix in front? > + struct device *dev; > + struct tee_context *ctx; > + u32 session_id; > + struct tee_shm *shm_pool; > +}; > + > +extern struct trusted_key_ops tee_trusted_key_ops; This looks like the only thing that must be in this header. > + > +#endif > diff --git a/security/keys/trusted-keys/Makefile b/security/keys/trusted-keys/Makefile > index 49e3bcf..012dd78 100644 > --- a/security/keys/trusted-keys/Makefile > +++ b/security/keys/trusted-keys/Makefile > @@ -7,3 +7,4 @@ obj-$(CONFIG_TRUSTED_KEYS) += trusted.o > trusted-y += trusted_core.o > trusted-y += trusted_tpm1.o > trusted-y += trusted_tpm2.o > +trusted-y += trusted_tee.o Shouldn't this depend on CONFIG_TEE or similar? Otherwise without LTO, you'd run into linker errors. [Apologies if these points were raised in previous review cycles, I just recently subscribed] Cheers, Ahmad > diff --git a/security/keys/trusted-keys/trusted_core.c b/security/keys/trusted-keys/trusted_core.c > index aa4f2a0..15b1b0f3 100644 > --- a/security/keys/trusted-keys/trusted_core.c > +++ b/security/keys/trusted-keys/trusted_core.c > @@ -8,6 +8,7 @@ > > #include <keys/user-type.h> > #include <keys/trusted-type.h> > +#include <keys/trusted_tee.h> > #include <keys/trusted_tpm.h> > #include <linux/capability.h> > #include <linux/err.h> > @@ -29,6 +30,9 @@ static const struct trusted_key_source trusted_key_sources[] = { > #if defined(CONFIG_TCG_TPM) > { "tpm", &tpm_trusted_key_ops }, > #endif > +#if defined(CONFIG_TEE) > + { "tee", &tee_trusted_key_ops }, > +#endif > }; > > DEFINE_STATIC_CALL_NULL(trusted_key_init, *trusted_key_sources[0].ops->init); > diff --git a/security/keys/trusted-keys/trusted_tee.c b/security/keys/trusted-keys/trusted_tee.c > new file mode 100644 > index 0000000..da8785a > --- /dev/null > +++ b/security/keys/trusted-keys/trusted_tee.c > @@ -0,0 +1,278 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2019-2020 Linaro Ltd. > + * > + * Author: > + * Sumit Garg <sumit.garg@linaro.org> > + */ > + > +#include <linux/err.h> > +#include <linux/key-type.h> > +#include <linux/slab.h> > +#include <linux/string.h> > +#include <linux/uuid.h> > + > +#include <keys/trusted-type.h> > +#include <keys/trusted_tee.h> > + > +static struct trusted_key_private pvt_data; > + > +/* > + * Have the TEE seal(encrypt) the symmetric key > + */ > +static int trusted_tee_seal(struct trusted_key_payload *p, char *datablob) > +{ > + int ret; > + struct tee_ioctl_invoke_arg inv_arg; > + struct tee_param param[4]; > + struct tee_shm *reg_shm_in = NULL, *reg_shm_out = NULL; > + > + memset(&inv_arg, 0, sizeof(inv_arg)); > + memset(¶m, 0, sizeof(param)); > + > + reg_shm_in = tee_shm_register(pvt_data.ctx, (unsigned long)p->key, > + p->key_len, TEE_SHM_DMA_BUF | > + TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm_in)) { > + dev_err(pvt_data.dev, "key shm register failed\n"); > + return PTR_ERR(reg_shm_in); > + } > + > + reg_shm_out = tee_shm_register(pvt_data.ctx, (unsigned long)p->blob, > + sizeof(p->blob), TEE_SHM_DMA_BUF | > + TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm_out)) { > + dev_err(pvt_data.dev, "blob shm register failed\n"); > + ret = PTR_ERR(reg_shm_out); > + goto out; > + } > + > + inv_arg.func = TA_CMD_SEAL; > + inv_arg.session = pvt_data.session_id; > + inv_arg.num_params = 4; > + > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; > + param[0].u.memref.shm = reg_shm_in; > + param[0].u.memref.size = p->key_len; > + param[0].u.memref.shm_offs = 0; > + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; > + param[1].u.memref.shm = reg_shm_out; > + param[1].u.memref.size = sizeof(p->blob); > + param[1].u.memref.shm_offs = 0; > + > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + dev_err(pvt_data.dev, "TA_CMD_SEAL invoke err: %x\n", > + inv_arg.ret); > + ret = -EFAULT; > + } else { > + p->blob_len = param[1].u.memref.size; > + } > + > +out: > + if (reg_shm_out) > + tee_shm_free(reg_shm_out); > + if (reg_shm_in) > + tee_shm_free(reg_shm_in); > + > + return ret; > +} > + > +/* > + * Have the TEE unseal(decrypt) the symmetric key > + */ > +static int trusted_tee_unseal(struct trusted_key_payload *p, char *datablob) > +{ > + int ret; > + struct tee_ioctl_invoke_arg inv_arg; > + struct tee_param param[4]; > + struct tee_shm *reg_shm_in = NULL, *reg_shm_out = NULL; > + > + memset(&inv_arg, 0, sizeof(inv_arg)); > + memset(¶m, 0, sizeof(param)); > + > + reg_shm_in = tee_shm_register(pvt_data.ctx, (unsigned long)p->blob, > + p->blob_len, TEE_SHM_DMA_BUF | > + TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm_in)) { > + dev_err(pvt_data.dev, "blob shm register failed\n"); > + return PTR_ERR(reg_shm_in); > + } > + > + reg_shm_out = tee_shm_register(pvt_data.ctx, (unsigned long)p->key, > + sizeof(p->key), TEE_SHM_DMA_BUF | > + TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm_out)) { > + dev_err(pvt_data.dev, "key shm register failed\n"); > + ret = PTR_ERR(reg_shm_out); > + goto out; > + } > + > + inv_arg.func = TA_CMD_UNSEAL; > + inv_arg.session = pvt_data.session_id; > + inv_arg.num_params = 4; > + > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; > + param[0].u.memref.shm = reg_shm_in; > + param[0].u.memref.size = p->blob_len; > + param[0].u.memref.shm_offs = 0; > + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; > + param[1].u.memref.shm = reg_shm_out; > + param[1].u.memref.size = sizeof(p->key); > + param[1].u.memref.shm_offs = 0; > + > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + dev_err(pvt_data.dev, "TA_CMD_UNSEAL invoke err: %x\n", > + inv_arg.ret); > + ret = -EFAULT; > + } else { > + p->key_len = param[1].u.memref.size; > + } > + > +out: > + if (reg_shm_out) > + tee_shm_free(reg_shm_out); > + if (reg_shm_in) > + tee_shm_free(reg_shm_in); > + > + return ret; > +} > + > +/* > + * Have the TEE generate random symmetric key > + */ > +static int trusted_tee_get_random(unsigned char *key, size_t key_len) > +{ > + int ret; > + struct tee_ioctl_invoke_arg inv_arg; > + struct tee_param param[4]; > + struct tee_shm *reg_shm = NULL; > + > + memset(&inv_arg, 0, sizeof(inv_arg)); > + memset(¶m, 0, sizeof(param)); > + > + reg_shm = tee_shm_register(pvt_data.ctx, (unsigned long)key, key_len, > + TEE_SHM_DMA_BUF | TEE_SHM_KERNEL_MAPPED); > + if (IS_ERR(reg_shm)) { > + dev_err(pvt_data.dev, "key shm register failed\n"); > + return PTR_ERR(reg_shm); > + } > + > + inv_arg.func = TA_CMD_GET_RANDOM; > + inv_arg.session = pvt_data.session_id; > + inv_arg.num_params = 4; > + > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; > + param[0].u.memref.shm = reg_shm; > + param[0].u.memref.size = key_len; > + param[0].u.memref.shm_offs = 0; > + > + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param); > + if ((ret < 0) || (inv_arg.ret != 0)) { > + dev_err(pvt_data.dev, "TA_CMD_GET_RANDOM invoke err: %x\n", > + inv_arg.ret); > + ret = -EFAULT; > + } else { > + ret = param[0].u.memref.size; > + } > + > + tee_shm_free(reg_shm); > + > + return ret; > +} > + > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) > +{ > + if (ver->impl_id == TEE_IMPL_ID_OPTEE) > + return 1; > + else > + return 0; > +} > + > +static int trusted_key_probe(struct device *dev) > +{ > + struct tee_client_device *rng_device = to_tee_client_device(dev); > + int ret; > + struct tee_ioctl_open_session_arg sess_arg; > + > + memset(&sess_arg, 0, sizeof(sess_arg)); > + > + pvt_data.ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, > + NULL); > + if (IS_ERR(pvt_data.ctx)) > + return -ENODEV; > + > + memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN); > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; > + sess_arg.num_params = 0; > + > + ret = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL); > + if ((ret < 0) || (sess_arg.ret != 0)) { > + dev_err(dev, "tee_client_open_session failed, err: %x\n", > + sess_arg.ret); > + ret = -EINVAL; > + goto out_ctx; > + } > + pvt_data.session_id = sess_arg.session; > + > + ret = register_key_type(&key_type_trusted); > + if (ret < 0) > + goto out_sess; > + > + pvt_data.dev = dev; > + > + return 0; > + > +out_sess: > + tee_client_close_session(pvt_data.ctx, pvt_data.session_id); > +out_ctx: > + tee_client_close_context(pvt_data.ctx); > + > + return ret; > +} > + > +static int trusted_key_remove(struct device *dev) > +{ > + unregister_key_type(&key_type_trusted); > + tee_client_close_session(pvt_data.ctx, pvt_data.session_id); > + tee_client_close_context(pvt_data.ctx); > + > + return 0; > +} > + > +static const struct tee_client_device_id trusted_key_id_table[] = { > + {UUID_INIT(0xf04a0fe7, 0x1f5d, 0x4b9b, > + 0xab, 0xf7, 0x61, 0x9b, 0x85, 0xb4, 0xce, 0x8c)}, > + {} > +}; > +MODULE_DEVICE_TABLE(tee, trusted_key_id_table); > + > +static struct tee_client_driver trusted_key_driver = { > + .id_table = trusted_key_id_table, > + .driver = { > + .name = DRIVER_NAME, > + .bus = &tee_bus_type, > + .probe = trusted_key_probe, > + .remove = trusted_key_remove, > + }, > +}; > + > +static int trusted_tee_init(void) > +{ > + return driver_register(&trusted_key_driver.driver); > +} > + > +static void trusted_tee_exit(void) > +{ > + driver_unregister(&trusted_key_driver.driver); > +} > + > +struct trusted_key_ops tee_trusted_key_ops = { > + .migratable = 0, /* non-migratable */ > + .init = trusted_tee_init, > + .seal = trusted_tee_seal, > + .unseal = trusted_tee_unseal, > + .get_random = trusted_tee_get_random, > + .exit = trusted_tee_exit, > +}; >
On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > > On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > > On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > > > On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > > > > Hi Jarkko, > > > > > > > > > > > > On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > > > > > > > On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > > > > > Add support for TEE based trusted keys where TEE provides the functionality > > > > > > > > to seal and unseal trusted keys using hardware unique key. > > > > > > > > > > > > > > > > Refer to Documentation/tee.txt for detailed information about TEE. > > > > > > > > > > > > > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > > > > > > > > > > I haven't yet got QEMU environment working with aarch64, this produces > > > > > > > just a blank screen: > > > > > > > > > > > > > > ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > > > > > > > > > > > My BuildRoot fork for TPM and keyring testing is located over here: > > > > > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > > > > > > > > > > > The "ARM version" is at this point in aarch64 branch. Over time I will > > > > > > > define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > > > > in the master branch. > > > > > > > > > > > > > > To create identical images you just need to > > > > > > > > > > > > > > $ make tpmdd_defconfig && make > > > > > > > > > > > > > > Can you check if you see anything obviously wrong? I'm eager to test this > > > > > > > patch set, and in bigger picture I really need to have ready to run > > > > > > > aarch64 environment available. > > > > > > > > > > > > I would rather suggest you to follow steps listed here [1] as to test > > > > > > this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > > > > OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > > > > system [2]. And then it would be easier to migrate them to your > > > > > > buildroot environment as well. > > > > > > > > > > > > [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > > > > [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > > > > > > > > > -Sumit > > > > > > > > > > Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > > > > > > > > > > $ cat keyctl_change > > > > diff --git a/common.mk b/common.mk > > > > index aeb7b41..663e528 100644 > > > > --- a/common.mk > > > > +++ b/common.mk > > > > @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > > BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > > BR2_PACKAGE_STRACE ?= y > > > > BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > > $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > > +BR2_PACKAGE_KEYUTILS := y > > > > > > > > # All BR2_* variables from the makefile or the environment are appended to > > > > # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > > diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > > index 368c18a..832ab74 100644 > > > > --- a/kconfigs/qemu.conf > > > > +++ b/kconfigs/qemu.conf > > > > @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > > CONFIG_9P_FS_POSIX_ACL=y > > > > CONFIG_HW_RANDOM=y > > > > CONFIG_HW_RANDOM_VIRTIO=y > > > > +CONFIG_TRUSTED_KEYS=y > > > > +CONFIG_ENCRYPTED_KEYS=y > > > > > > > > > After I've successfully tested 2/4, I'd suggest that you roll out one more > > > > > version and CC the documentation patch to Elaine and Mini, and clearly > > > > > remark in the commit message that TEE is a standard, with a link to the > > > > > specification. > > > > > > > > > > > > > Sure, I will roll out the next version after your testing. > > > > > > Thanks, I'll try this at instant, and give my feedback. > > > > I bump into this: > > > > $ make run-only > > ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > make: *** [Makefile:194: run-only] Error 1 > > > > Could you check if the following directory tree is built after > executing the below command? > > $ make -j`nproc` > CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > $ tree out/bin/ > out/bin/ > ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > ├── bl31.bin -> > /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > ├── bl32.bin -> > /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > ├── bl32_extra1.bin -> > /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > ├── bl32_extra2.bin -> > /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > ├── bl33.bin -> > /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > └── rootfs.cpio.gz -> > /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > 0 directories, 9 files > > -Sumit I actually spotted a build error that was unnoticed last time: make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' /bin/sh: 1: python: not found I'd prefer not to install Python2. It has been EOL over a year. /Jarkko
On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: >> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: >>> >>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: >>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: >>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: >>>>>> >>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: >>>>>>> Hi Jarkko, >>>>>>> >>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: >>>>>>>> >>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: >>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality >>>>>>>>> to seal and unseal trusted keys using hardware unique key. >>>>>>>>> >>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. >>>>>>>>> >>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> >>>>>>>> >>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces >>>>>>>> just a blank screen: >>>>>>>> >>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio >>>>>>>> >>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: >>>>>>>> >>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ >>>>>>>> >>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will >>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then >>>>>>>> in the master branch. >>>>>>>> >>>>>>>> To create identical images you just need to >>>>>>>> >>>>>>>> $ make tpmdd_defconfig && make >>>>>>>> >>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this >>>>>>>> patch set, and in bigger picture I really need to have ready to run >>>>>>>> aarch64 environment available. >>>>>>> >>>>>>> I would rather suggest you to follow steps listed here [1] as to test >>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, >>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build >>>>>>> system [2]. And then it would be easier to migrate them to your >>>>>>> buildroot environment as well. >>>>>>> >>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html >>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 >>>>>>> >>>>>>> -Sumit >>>>>> >>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. >>>>>> >>>>> >>>>> $ cat keyctl_change >>>>> diff --git a/common.mk b/common.mk >>>>> index aeb7b41..663e528 100644 >>>>> --- a/common.mk >>>>> +++ b/common.mk >>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) >>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) >>>>> BR2_PACKAGE_STRACE ?= y >>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if >>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) >>>>> +BR2_PACKAGE_KEYUTILS := y >>>>> >>>>> # All BR2_* variables from the makefile or the environment are appended to >>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. >>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf >>>>> index 368c18a..832ab74 100644 >>>>> --- a/kconfigs/qemu.conf >>>>> +++ b/kconfigs/qemu.conf >>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y >>>>> CONFIG_9P_FS_POSIX_ACL=y >>>>> CONFIG_HW_RANDOM=y >>>>> CONFIG_HW_RANDOM_VIRTIO=y >>>>> +CONFIG_TRUSTED_KEYS=y >>>>> +CONFIG_ENCRYPTED_KEYS=y >>>>> >>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more >>>>>> version and CC the documentation patch to Elaine and Mini, and clearly >>>>>> remark in the commit message that TEE is a standard, with a link to the >>>>>> specification. >>>>>> >>>>> >>>>> Sure, I will roll out the next version after your testing. >>>> >>>> Thanks, I'll try this at instant, and give my feedback. >>> >>> I bump into this: >>> >>> $ make run-only >>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ >>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory >>> make: *** [Makefile:194: run-only] Error 1 >>> >> >> Could you check if the following directory tree is built after >> executing the below command? >> >> $ make -j`nproc` >> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c >> >> $ tree out/bin/ >> out/bin/ >> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin >> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin >> ├── bl31.bin -> >> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin >> ├── bl32.bin -> >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin >> ├── bl32_extra1.bin -> >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin >> ├── bl32_extra2.bin -> >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin >> ├── bl33.bin -> >> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd >> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image >> └── rootfs.cpio.gz -> >> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz >> >> 0 directories, 9 files >> >> -Sumit > > I actually spotted a build error that was unnoticed last time: > > make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > /bin/sh: 1: python: not found > > I'd prefer not to install Python2. It has been EOL over a year. AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 machine, this is accomplished by installing package "python-is-python3" (after uninstalling "python-is-python2" if need be). $ ls -l /usr/bin/python lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3
On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > >> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > >>> > >>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > >>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > >>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > >>>>>> > >>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > >>>>>>> Hi Jarkko, > >>>>>>> > >>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > >>>>>>>> > >>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > >>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > >>>>>>>>> to seal and unseal trusted keys using hardware unique key. > >>>>>>>>> > >>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > >>>>>>>>> > >>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > >>>>>>>> > >>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > >>>>>>>> just a blank screen: > >>>>>>>> > >>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > >>>>>>>> > >>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > >>>>>>>> > >>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > >>>>>>>> > >>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > >>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > >>>>>>>> in the master branch. > >>>>>>>> > >>>>>>>> To create identical images you just need to > >>>>>>>> > >>>>>>>> $ make tpmdd_defconfig && make > >>>>>>>> > >>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > >>>>>>>> patch set, and in bigger picture I really need to have ready to run > >>>>>>>> aarch64 environment available. > >>>>>>> > >>>>>>> I would rather suggest you to follow steps listed here [1] as to test > >>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > >>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > >>>>>>> system [2]. And then it would be easier to migrate them to your > >>>>>>> buildroot environment as well. > >>>>>>> > >>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > >>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > >>>>>>> > >>>>>>> -Sumit > >>>>>> > >>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > >>>>>> > >>>>> > >>>>> $ cat keyctl_change > >>>>> diff --git a/common.mk b/common.mk > >>>>> index aeb7b41..663e528 100644 > >>>>> --- a/common.mk > >>>>> +++ b/common.mk > >>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > >>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > >>>>> BR2_PACKAGE_STRACE ?= y > >>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > >>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > >>>>> +BR2_PACKAGE_KEYUTILS := y > >>>>> > >>>>> # All BR2_* variables from the makefile or the environment are appended to > >>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > >>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > >>>>> index 368c18a..832ab74 100644 > >>>>> --- a/kconfigs/qemu.conf > >>>>> +++ b/kconfigs/qemu.conf > >>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > >>>>> CONFIG_9P_FS_POSIX_ACL=y > >>>>> CONFIG_HW_RANDOM=y > >>>>> CONFIG_HW_RANDOM_VIRTIO=y > >>>>> +CONFIG_TRUSTED_KEYS=y > >>>>> +CONFIG_ENCRYPTED_KEYS=y > >>>>> > >>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > >>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > >>>>>> remark in the commit message that TEE is a standard, with a link to the > >>>>>> specification. > >>>>>> > >>>>> > >>>>> Sure, I will roll out the next version after your testing. > >>>> > >>>> Thanks, I'll try this at instant, and give my feedback. > >>> > >>> I bump into this: > >>> > >>> $ make run-only > >>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > >>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > >>> make: *** [Makefile:194: run-only] Error 1 > >>> > >> > >> Could you check if the following directory tree is built after > >> executing the below command? > >> > >> $ make -j`nproc` > >> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > >> > >> $ tree out/bin/ > >> out/bin/ > >> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > >> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > >> ├── bl31.bin -> > >> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > >> ├── bl32.bin -> > >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > >> ├── bl32_extra1.bin -> > >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > >> ├── bl32_extra2.bin -> > >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > >> ├── bl33.bin -> > >> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > >> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > >> └── rootfs.cpio.gz -> > >> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > >> > >> 0 directories, 9 files > >> > >> -Sumit > > > > I actually spotted a build error that was unnoticed last time: > > > > make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > /bin/sh: 1: python: not found > > > > I'd prefer not to install Python2. It has been EOL over a year. > > AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > machine, this is accomplished by installing package "python-is-python3" > (after uninstalling "python-is-python2" if need be). > > $ ls -l /usr/bin/python > lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 Right, just found about this in unrelated context :-) [*] Hope this will work out... [*] https://github.com/surge-synthesizer/surge/pull/3655 /Jarkko
On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > > > > On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > > On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > > >> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > >>> > > >>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > >>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > >>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > >>>>>> > > >>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > >>>>>>> Hi Jarkko, > > >>>>>>> > > >>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > >>>>>>>> > > >>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > >>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > > >>>>>>>>> to seal and unseal trusted keys using hardware unique key. > > >>>>>>>>> > > >>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > > >>>>>>>>> > > >>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > >>>>>>>> > > >>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > > >>>>>>>> just a blank screen: > > >>>>>>>> > > >>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > >>>>>>>> > > >>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > > >>>>>>>> > > >>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > >>>>>>>> > > >>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > > >>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > >>>>>>>> in the master branch. > > >>>>>>>> > > >>>>>>>> To create identical images you just need to > > >>>>>>>> > > >>>>>>>> $ make tpmdd_defconfig && make > > >>>>>>>> > > >>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > > >>>>>>>> patch set, and in bigger picture I really need to have ready to run > > >>>>>>>> aarch64 environment available. > > >>>>>>> > > >>>>>>> I would rather suggest you to follow steps listed here [1] as to test > > >>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > >>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > >>>>>>> system [2]. And then it would be easier to migrate them to your > > >>>>>>> buildroot environment as well. > > >>>>>>> > > >>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > >>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > >>>>>>> > > >>>>>>> -Sumit > > >>>>>> > > >>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > >>>>>> > > >>>>> > > >>>>> $ cat keyctl_change > > >>>>> diff --git a/common.mk b/common.mk > > >>>>> index aeb7b41..663e528 100644 > > >>>>> --- a/common.mk > > >>>>> +++ b/common.mk > > >>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > >>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > >>>>> BR2_PACKAGE_STRACE ?= y > > >>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > >>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > >>>>> +BR2_PACKAGE_KEYUTILS := y > > >>>>> > > >>>>> # All BR2_* variables from the makefile or the environment are appended to > > >>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > > >>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > >>>>> index 368c18a..832ab74 100644 > > >>>>> --- a/kconfigs/qemu.conf > > >>>>> +++ b/kconfigs/qemu.conf > > >>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > >>>>> CONFIG_9P_FS_POSIX_ACL=y > > >>>>> CONFIG_HW_RANDOM=y > > >>>>> CONFIG_HW_RANDOM_VIRTIO=y > > >>>>> +CONFIG_TRUSTED_KEYS=y > > >>>>> +CONFIG_ENCRYPTED_KEYS=y > > >>>>> > > >>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > > >>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > > >>>>>> remark in the commit message that TEE is a standard, with a link to the > > >>>>>> specification. > > >>>>>> > > >>>>> > > >>>>> Sure, I will roll out the next version after your testing. > > >>>> > > >>>> Thanks, I'll try this at instant, and give my feedback. > > >>> > > >>> I bump into this: > > >>> > > >>> $ make run-only > > >>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > >>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > >>> make: *** [Makefile:194: run-only] Error 1 > > >>> > > >> > > >> Could you check if the following directory tree is built after > > >> executing the below command? > > >> > > >> $ make -j`nproc` > > >> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > >> > > >> $ tree out/bin/ > > >> out/bin/ > > >> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > > >> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > > >> ├── bl31.bin -> > > >> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > > >> ├── bl32.bin -> > > >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > > >> ├── bl32_extra1.bin -> > > >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > > >> ├── bl32_extra2.bin -> > > >> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > > >> ├── bl33.bin -> > > >> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > > >> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > > >> └── rootfs.cpio.gz -> > > >> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > >> > > >> 0 directories, 9 files > > >> > > >> -Sumit > > > > > > I actually spotted a build error that was unnoticed last time: > > > > > > make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > > /bin/sh: 1: python: not found > > > > > > I'd prefer not to install Python2. It has been EOL over a year. > > > > AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > > machine, this is accomplished by installing package "python-is-python3" > > (after uninstalling "python-is-python2" if need be). > > > > $ ls -l /usr/bin/python > > lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > > Right, just found about this in unrelated context :-) [*] > > Hope this will work out... > > [*] https://github.com/surge-synthesizer/surge/pull/3655 Now I get Traceback (most recent call last): File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> allTests = GetAllTestsSuite() File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite import CToolsTests File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> import TianoCompress File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> TheTestSuite = TestTools.MakeTheTestSuite(locals()) File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite for name, item in localItems.iteritems(): AttributeError: 'dict' object has no attribute 'iteritems' /Jarkko
On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: >>> >>> >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: >>>>>> >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: >>>>>>>>> >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: >>>>>>>>>> Hi Jarkko, >>>>>>>>>> >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: >>>>>>>>>>> >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. >>>>>>>>>>>> >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. >>>>>>>>>>>> >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> >>>>>>>>>>> >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces >>>>>>>>>>> just a blank screen: >>>>>>>>>>> >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio >>>>>>>>>>> >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: >>>>>>>>>>> >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ >>>>>>>>>>> >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then >>>>>>>>>>> in the master branch. >>>>>>>>>>> >>>>>>>>>>> To create identical images you just need to >>>>>>>>>>> >>>>>>>>>>> $ make tpmdd_defconfig && make >>>>>>>>>>> >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run >>>>>>>>>>> aarch64 environment available. >>>>>>>>>> >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build >>>>>>>>>> system [2]. And then it would be easier to migrate them to your >>>>>>>>>> buildroot environment as well. >>>>>>>>>> >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 >>>>>>>>>> >>>>>>>>>> -Sumit >>>>>>>>> >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. >>>>>>>>> >>>>>>>> >>>>>>>> $ cat keyctl_change >>>>>>>> diff --git a/common.mk b/common.mk >>>>>>>> index aeb7b41..663e528 100644 >>>>>>>> --- a/common.mk >>>>>>>> +++ b/common.mk >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) >>>>>>>> BR2_PACKAGE_STRACE ?= y >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) >>>>>>>> +BR2_PACKAGE_KEYUTILS := y >>>>>>>> >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf >>>>>>>> index 368c18a..832ab74 100644 >>>>>>>> --- a/kconfigs/qemu.conf >>>>>>>> +++ b/kconfigs/qemu.conf >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y >>>>>>>> CONFIG_HW_RANDOM=y >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y >>>>>>>> +CONFIG_TRUSTED_KEYS=y >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y >>>>>>>> >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the >>>>>>>>> specification. >>>>>>>>> >>>>>>>> >>>>>>>> Sure, I will roll out the next version after your testing. >>>>>>> >>>>>>> Thanks, I'll try this at instant, and give my feedback. >>>>>> >>>>>> I bump into this: >>>>>> >>>>>> $ make run-only >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory >>>>>> make: *** [Makefile:194: run-only] Error 1 >>>>>> >>>>> >>>>> Could you check if the following directory tree is built after >>>>> executing the below command? >>>>> >>>>> $ make -j`nproc` >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c >>>>> >>>>> $ tree out/bin/ >>>>> out/bin/ >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin >>>>> ├── bl31.bin -> >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin >>>>> ├── bl32.bin -> >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin >>>>> ├── bl32_extra1.bin -> >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin >>>>> ├── bl32_extra2.bin -> >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin >>>>> ├── bl33.bin -> >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image >>>>> └── rootfs.cpio.gz -> >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz >>>>> >>>>> 0 directories, 9 files >>>>> >>>>> -Sumit >>>> >>>> I actually spotted a build error that was unnoticed last time: >>>> >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' >>>> /bin/sh: 1: python: not found >>>> >>>> I'd prefer not to install Python2. It has been EOL over a year. >>> >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 >>> machine, this is accomplished by installing package "python-is-python3" >>> (after uninstalling "python-is-python2" if need be). >>> >>> $ ls -l /usr/bin/python >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 >> >> Right, just found about this in unrelated context :-) [*] >> >> Hope this will work out... >> >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > Now I get > > Traceback (most recent call last): > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > allTests = GetAllTestsSuite() > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > import CToolsTests > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > import TianoCompress > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > for name, item in localItems.iteritems(): > AttributeError: 'dict' object has no attribute 'iteritems' Right. Same here after removing all traces of Python2 from my system :-/ A couple of fixes are needed: 1. EDK2 needs to be upgraded to tag or later [1] 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] [1] https://github.com/OP-TEE/manifest/pull/177 [2] https://github.com/OP-TEE/build/pull/450 HTH,
On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > >>> > >>> > >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > >>>>>> > >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > >>>>>>>>> > >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > >>>>>>>>>> Hi Jarkko, > >>>>>>>>>> > >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > >>>>>>>>>>> > >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. > >>>>>>>>>>>> > >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > >>>>>>>>>>>> > >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > >>>>>>>>>>> > >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > >>>>>>>>>>> just a blank screen: > >>>>>>>>>>> > >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > >>>>>>>>>>> > >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > >>>>>>>>>>> > >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > >>>>>>>>>>> > >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > >>>>>>>>>>> in the master branch. > >>>>>>>>>>> > >>>>>>>>>>> To create identical images you just need to > >>>>>>>>>>> > >>>>>>>>>>> $ make tpmdd_defconfig && make > >>>>>>>>>>> > >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run > >>>>>>>>>>> aarch64 environment available. > >>>>>>>>>> > >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test > >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > >>>>>>>>>> system [2]. And then it would be easier to migrate them to your > >>>>>>>>>> buildroot environment as well. > >>>>>>>>>> > >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > >>>>>>>>>> > >>>>>>>>>> -Sumit > >>>>>>>>> > >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > >>>>>>>>> > >>>>>>>> > >>>>>>>> $ cat keyctl_change > >>>>>>>> diff --git a/common.mk b/common.mk > >>>>>>>> index aeb7b41..663e528 100644 > >>>>>>>> --- a/common.mk > >>>>>>>> +++ b/common.mk > >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > >>>>>>>> BR2_PACKAGE_STRACE ?= y > >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > >>>>>>>> +BR2_PACKAGE_KEYUTILS := y > >>>>>>>> > >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to > >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > >>>>>>>> index 368c18a..832ab74 100644 > >>>>>>>> --- a/kconfigs/qemu.conf > >>>>>>>> +++ b/kconfigs/qemu.conf > >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y > >>>>>>>> CONFIG_HW_RANDOM=y > >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y > >>>>>>>> +CONFIG_TRUSTED_KEYS=y > >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y > >>>>>>>> > >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the > >>>>>>>>> specification. > >>>>>>>>> > >>>>>>>> > >>>>>>>> Sure, I will roll out the next version after your testing. > >>>>>>> > >>>>>>> Thanks, I'll try this at instant, and give my feedback. > >>>>>> > >>>>>> I bump into this: > >>>>>> > >>>>>> $ make run-only > >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > >>>>>> make: *** [Makefile:194: run-only] Error 1 > >>>>>> > >>>>> > >>>>> Could you check if the following directory tree is built after > >>>>> executing the below command? > >>>>> > >>>>> $ make -j`nproc` > >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > >>>>> > >>>>> $ tree out/bin/ > >>>>> out/bin/ > >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > >>>>> ├── bl31.bin -> > >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > >>>>> ├── bl32.bin -> > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > >>>>> ├── bl32_extra1.bin -> > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > >>>>> ├── bl32_extra2.bin -> > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > >>>>> ├── bl33.bin -> > >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > >>>>> └── rootfs.cpio.gz -> > >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > >>>>> > >>>>> 0 directories, 9 files > >>>>> > >>>>> -Sumit > >>>> > >>>> I actually spotted a build error that was unnoticed last time: > >>>> > >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > >>>> /bin/sh: 1: python: not found > >>>> > >>>> I'd prefer not to install Python2. It has been EOL over a year. > >>> > >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > >>> machine, this is accomplished by installing package "python-is-python3" > >>> (after uninstalling "python-is-python2" if need be). > >>> > >>> $ ls -l /usr/bin/python > >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > >> > >> Right, just found about this in unrelated context :-) [*] > >> > >> Hope this will work out... > >> > >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > Now I get > > > > Traceback (most recent call last): > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > allTests = GetAllTestsSuite() > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > import CToolsTests > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > import TianoCompress > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > for name, item in localItems.iteritems(): > > AttributeError: 'dict' object has no attribute 'iteritems' > > Right. Same here after removing all traces of Python2 from my system :-/ > > A couple of fixes are needed: > 1. EDK2 needs to be upgraded to tag or later [1] > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > [1] https://github.com/OP-TEE/manifest/pull/177 > [2] https://github.com/OP-TEE/build/pull/450 BTW, Is to *really* impossible to test this with plain BuildRoot. It's obvious that this forks BR internally. I mean even if I get this working once, this will feels like a clumsy way to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And it would be nice to be able to start doing regular ARM testing. The mainline BuildRoot does have bunch of BR2_PACKAGE_OPTEE_* included. Are they all broken? Here's a reference where I got with that endeavour: https://lore.kernel.org/linux-integrity/X%2Fx+N0fgrzIZTeNi@kernel.org/ /Jarkko
On Mon, 2021-01-25 at 14:47 +0530, Sumit Garg wrote: > Hi Jarkko, > > On Fri, 22 Jan 2021 at 23:42, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > > > > > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > > > > > On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > > > > > > > > > > > > > > > > On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > > > > > > On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > > > > > > > > On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > > > > > > > > > > > On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > > > > > > > > > On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > > > > > > > > > On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > > > > > > > > > > > > > > > > > On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > > > > > > > > > > > Hi Jarkko, > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > > > > > > > > > > > > Add support for TEE based trusted keys where TEE provides the functionality > > > > > > > > > > > > > > > to seal and unseal trusted keys using hardware unique key. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Refer to Documentation/tee.txt for detailed information about TEE. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > > > > > > > > > > > > > > > > > > > > > > > > I haven't yet got QEMU environment working with aarch64, this produces > > > > > > > > > > > > > > just a blank screen: > > > > > > > > > > > > > > > > > > > > > > > > > > > > ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > > > > > > > > > > > > > > > > > > > > > > > > > My BuildRoot fork for TPM and keyring testing is located over here: > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > The "ARM version" is at this point in aarch64 branch. Over time I will > > > > > > > > > > > > > > define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > > > > > > > > > > > in the master branch. > > > > > > > > > > > > > > > > > > > > > > > > > > > > To create identical images you just need to > > > > > > > > > > > > > > > > > > > > > > > > > > > > $ make tpmdd_defconfig && make > > > > > > > > > > > > > > > > > > > > > > > > > > > > Can you check if you see anything obviously wrong? I'm eager to test this > > > > > > > > > > > > > > patch set, and in bigger picture I really need to have ready to run > > > > > > > > > > > > > > aarch64 environment available. > > > > > > > > > > > > > > > > > > > > > > > > > > I would rather suggest you to follow steps listed here [1] as to test > > > > > > > > > > > > > this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > > > > > > > > > > > OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > > > > > > > > > > > system [2]. And then it would be easier to migrate them to your > > > > > > > > > > > > > buildroot environment as well. > > > > > > > > > > > > > > > > > > > > > > > > > > [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > > > > > > > > > > > [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > > > > > > > > > > > > > > > > > > > > > > > -Sumit > > > > > > > > > > > > > > > > > > > > > > > > Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > $ cat keyctl_change > > > > > > > > > > > diff --git a/common.mk b/common.mk > > > > > > > > > > > index aeb7b41..663e528 100644 > > > > > > > > > > > --- a/common.mk > > > > > > > > > > > +++ b/common.mk > > > > > > > > > > > @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > > > > > > > > > BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > > > > > > > > > BR2_PACKAGE_STRACE ?= y > > > > > > > > > > > BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > > > > > > > > > $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > > > > > > > > > +BR2_PACKAGE_KEYUTILS := y > > > > > > > > > > > > > > > > > > > > > > # All BR2_* variables from the makefile or the environment are appended to > > > > > > > > > > > # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > > > > > > > > > diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > > > > > > > > > index 368c18a..832ab74 100644 > > > > > > > > > > > --- a/kconfigs/qemu.conf > > > > > > > > > > > +++ b/kconfigs/qemu.conf > > > > > > > > > > > @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > > > > > > > > > CONFIG_9P_FS_POSIX_ACL=y > > > > > > > > > > > CONFIG_HW_RANDOM=y > > > > > > > > > > > CONFIG_HW_RANDOM_VIRTIO=y > > > > > > > > > > > +CONFIG_TRUSTED_KEYS=y > > > > > > > > > > > +CONFIG_ENCRYPTED_KEYS=y > > > > > > > > > > > > > > > > > > > > > > > After I've successfully tested 2/4, I'd suggest that you roll out one more > > > > > > > > > > > > version and CC the documentation patch to Elaine and Mini, and clearly > > > > > > > > > > > > remark in the commit message that TEE is a standard, with a link to the > > > > > > > > > > > > specification. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Sure, I will roll out the next version after your testing. > > > > > > > > > > > > > > > > > > > > Thanks, I'll try this at instant, and give my feedback. > > > > > > > > > > > > > > > > > > I bump into this: > > > > > > > > > > > > > > > > > > $ make run-only > > > > > > > > > ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > > > > > > > > ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > > > > > > > > make: *** [Makefile:194: run-only] Error 1 > > > > > > > > > > > > > > > > > > > > > > > > > Could you check if the following directory tree is built after > > > > > > > > executing the below command? > > > > > > > > > > > > > > > > $ make -j`nproc` > > > > > > > > CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > > > > > > > > > > > > > > > $ tree out/bin/ > > > > > > > > out/bin/ > > > > > > > > ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > > > > > > > > ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > > > > > > > > ├── bl31.bin -> > > > > > > > > /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > > > > > > > > ├── bl32.bin -> > > > > > > > > /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > > > > > > > > ├── bl32_extra1.bin -> > > > > > > > > /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > > > > > > > > ├── bl32_extra2.bin -> > > > > > > > > /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > > > > > > > > ├── bl33.bin -> > > > > > > > > /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > > > > > > > > ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > > > > > > > > └── rootfs.cpio.gz -> > > > > > > > > /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > > > > > > > > > > > > > > > 0 directories, 9 files > > > > > > > > > > > > > > > > -Sumit > > > > > > > > > > > > > > I actually spotted a build error that was unnoticed last time: > > > > > > > > > > > > > > make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > > > > > > /bin/sh: 1: python: not found > > > > > > > > > > > > > > I'd prefer not to install Python2. It has been EOL over a year. > > > > > > > > > > > > AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > > > > > > machine, this is accomplished by installing package "python-is-python3" > > > > > > (after uninstalling "python-is-python2" if need be). > > > > > > > > > > > > $ ls -l /usr/bin/python > > > > > > lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > > > > > > > > > > Right, just found about this in unrelated context :-) [*] > > > > > > > > > > Hope this will work out... > > > > > > > > > > [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > > > > > Now I get > > > > > > > > Traceback (most recent call last): > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > > > allTests = GetAllTestsSuite() > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > > > import CToolsTests > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > > > import TianoCompress > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > > > for name, item in localItems.iteritems(): > > > > AttributeError: 'dict' object has no attribute 'iteritems' > > > > > > Right. Same here after removing all traces of Python2 from my system :-/ > > > > > > A couple of fixes are needed: > > > 1. EDK2 needs to be upgraded to tag or later [1] > > > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > > > > > [1] https://github.com/OP-TEE/manifest/pull/177 > > > [2] https://github.com/OP-TEE/build/pull/450 > > > > BTW, Is to *really* impossible to test this with plain BuildRoot. It's > > obvious that this forks BR internally. > > > > I mean even if I get this working once, this will feels like a clumsy way > > to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And > > it would be nice to be able to start doing regular ARM testing. > > The main reason to guide you towards the OP-TEE build system is that > you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) > from source. If you don't need to rebuild those then I have prepared a > flash firmware binary blob for your testing (attached flash.bin). So > Qemu cmdline will look like: > > $ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu > cortex-a57 -kernel out/bin/Image -no-acpi -append > 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd > out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp > > Here you can use "Image" and "rootfs.cpio.gz" from your plain BR builds. > > Give it a try and let me know if this works for you. > > > > > The mainline BuildRoot does have bunch of BR2_PACKAGE_OPTEE_* included. > > Are they all broken? > > These aren't broken but they are used to package OP-TEE user-space > components into rootfs but they aren't required to test Trusted Keys > as it uses kernel interface to OP-TEE instead. > > -Sumit > > > > > Here's a reference where I got with that endeavour: > > > > https://lore.kernel.org/linux-integrity/X%2Fx+N0fgrzIZTeNi@kernel.org/ > > > > /Jarkko
On Mon, Jan 25, 2021 at 02:47:38PM +0530, Sumit Garg wrote: > Hi Jarkko, > > On Fri, 22 Jan 2021 at 23:42, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > > > > > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > > > >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > >>> > > > >>> > > > >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > > >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > > > >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > >>>>>> > > > >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > > >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > >>>>>>>>> > > > >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > >>>>>>>>>> Hi Jarkko, > > > >>>>>>>>>> > > > >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > >>>>>>>>>>> > > > >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > > > >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > >>>>>>>>>>> > > > >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > > > >>>>>>>>>>> just a blank screen: > > > >>>>>>>>>>> > > > >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > >>>>>>>>>>> > > > >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > > > >>>>>>>>>>> > > > >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > >>>>>>>>>>> > > > >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > > > >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > >>>>>>>>>>> in the master branch. > > > >>>>>>>>>>> > > > >>>>>>>>>>> To create identical images you just need to > > > >>>>>>>>>>> > > > >>>>>>>>>>> $ make tpmdd_defconfig && make > > > >>>>>>>>>>> > > > >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > > > >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run > > > >>>>>>>>>>> aarch64 environment available. > > > >>>>>>>>>> > > > >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test > > > >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > >>>>>>>>>> system [2]. And then it would be easier to migrate them to your > > > >>>>>>>>>> buildroot environment as well. > > > >>>>>>>>>> > > > >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > >>>>>>>>>> > > > >>>>>>>>>> -Sumit > > > >>>>>>>>> > > > >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > >>>>>>>>> > > > >>>>>>>> > > > >>>>>>>> $ cat keyctl_change > > > >>>>>>>> diff --git a/common.mk b/common.mk > > > >>>>>>>> index aeb7b41..663e528 100644 > > > >>>>>>>> --- a/common.mk > > > >>>>>>>> +++ b/common.mk > > > >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > >>>>>>>> BR2_PACKAGE_STRACE ?= y > > > >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > >>>>>>>> +BR2_PACKAGE_KEYUTILS := y > > > >>>>>>>> > > > >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to > > > >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > >>>>>>>> index 368c18a..832ab74 100644 > > > >>>>>>>> --- a/kconfigs/qemu.conf > > > >>>>>>>> +++ b/kconfigs/qemu.conf > > > >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y > > > >>>>>>>> CONFIG_HW_RANDOM=y > > > >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y > > > >>>>>>>> +CONFIG_TRUSTED_KEYS=y > > > >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y > > > >>>>>>>> > > > >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > > > >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > > > >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the > > > >>>>>>>>> specification. > > > >>>>>>>>> > > > >>>>>>>> > > > >>>>>>>> Sure, I will roll out the next version after your testing. > > > >>>>>>> > > > >>>>>>> Thanks, I'll try this at instant, and give my feedback. > > > >>>>>> > > > >>>>>> I bump into this: > > > >>>>>> > > > >>>>>> $ make run-only > > > >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > > >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > > >>>>>> make: *** [Makefile:194: run-only] Error 1 > > > >>>>>> > > > >>>>> > > > >>>>> Could you check if the following directory tree is built after > > > >>>>> executing the below command? > > > >>>>> > > > >>>>> $ make -j`nproc` > > > >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > > >>>>> > > > >>>>> $ tree out/bin/ > > > >>>>> out/bin/ > > > >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > > > >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > > > >>>>> ├── bl31.bin -> > > > >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > > > >>>>> ├── bl32.bin -> > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > > > >>>>> ├── bl32_extra1.bin -> > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > > > >>>>> ├── bl32_extra2.bin -> > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > > > >>>>> ├── bl33.bin -> > > > >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > > > >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > > > >>>>> └── rootfs.cpio.gz -> > > > >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > > >>>>> > > > >>>>> 0 directories, 9 files > > > >>>>> > > > >>>>> -Sumit > > > >>>> > > > >>>> I actually spotted a build error that was unnoticed last time: > > > >>>> > > > >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > > >>>> /bin/sh: 1: python: not found > > > >>>> > > > >>>> I'd prefer not to install Python2. It has been EOL over a year. > > > >>> > > > >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > > > >>> machine, this is accomplished by installing package "python-is-python3" > > > >>> (after uninstalling "python-is-python2" if need be). > > > >>> > > > >>> $ ls -l /usr/bin/python > > > >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > > > >> > > > >> Right, just found about this in unrelated context :-) [*] > > > >> > > > >> Hope this will work out... > > > >> > > > >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > > > > > Now I get > > > > > > > > Traceback (most recent call last): > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > > > allTests = GetAllTestsSuite() > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > > > import CToolsTests > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > > > import TianoCompress > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > > > for name, item in localItems.iteritems(): > > > > AttributeError: 'dict' object has no attribute 'iteritems' > > > > > > Right. Same here after removing all traces of Python2 from my system :-/ > > > > > > A couple of fixes are needed: > > > 1. EDK2 needs to be upgraded to tag or later [1] > > > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > > > > > [1] https://github.com/OP-TEE/manifest/pull/177 > > > [2] https://github.com/OP-TEE/build/pull/450 > > > > BTW, Is to *really* impossible to test this with plain BuildRoot. It's > > obvious that this forks BR internally. > > > > I mean even if I get this working once, this will feels like a clumsy way > > to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And > > it would be nice to be able to start doing regular ARM testing. > > The main reason to guide you towards the OP-TEE build system is that > you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) > from source. If you don't need to rebuild those then I have prepared a > flash firmware binary blob for your testing (attached flash.bin). So > Qemu cmdline will look like: > > $ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu > cortex-a57 -kernel out/bin/Image -no-acpi -append > 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd > out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp > > Here you can use "Image" and "rootfs.cpio.gz" from your plain BR builds. > > Give it a try and let me know if this works for you. Hi, sorry something happened with Evolution that I don't understand and it just sent the message quoted without my response. Should always stick to mutt. There's a bug in BuildRoot that prevents me testing right now, when you use LINUX_OVERRIDE_SRCDIR. BR developers are looking into that. I'll test this once there's a resolution for that. /Jarkko
On Mon, Jan 25, 2021 at 02:47:38PM +0530, Sumit Garg wrote: > The main reason to guide you towards the OP-TEE build system is that > you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) > from source. If you don't need to rebuild those then I have prepared a > flash firmware binary blob for your testing (attached flash.bin). So > Qemu cmdline will look like: > > $ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu > cortex-a57 -kernel out/bin/Image -no-acpi -append > 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd > out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp > > Here you can use "Image" and "rootfs.cpio.gz" from your plain BR builds. > > Give it a try and let me know if this works for you. Sumit, I can try this again now :-) Thanks Yann for fixing the issue! https://git.busybox.net/buildroot/commit/?id=b9e7adc152b5811b20724d8c05f0f2117254919c /Jarkko
On Mon, Jan 25, 2021 at 02:47:38PM +0530, Sumit Garg wrote: > Hi Jarkko, > > On Fri, 22 Jan 2021 at 23:42, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > > > > > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > > > >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > >>> > > > >>> > > > >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > > >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > > > >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > >>>>>> > > > >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > > >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > >>>>>>>>> > > > >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > >>>>>>>>>> Hi Jarkko, > > > >>>>>>>>>> > > > >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > >>>>>>>>>>> > > > >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > > > >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > >>>>>>>>>>> > > > >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > > > >>>>>>>>>>> just a blank screen: > > > >>>>>>>>>>> > > > >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > >>>>>>>>>>> > > > >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > > > >>>>>>>>>>> > > > >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > >>>>>>>>>>> > > > >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > > > >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > >>>>>>>>>>> in the master branch. > > > >>>>>>>>>>> > > > >>>>>>>>>>> To create identical images you just need to > > > >>>>>>>>>>> > > > >>>>>>>>>>> $ make tpmdd_defconfig && make > > > >>>>>>>>>>> > > > >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > > > >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run > > > >>>>>>>>>>> aarch64 environment available. > > > >>>>>>>>>> > > > >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test > > > >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > >>>>>>>>>> system [2]. And then it would be easier to migrate them to your > > > >>>>>>>>>> buildroot environment as well. > > > >>>>>>>>>> > > > >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > >>>>>>>>>> > > > >>>>>>>>>> -Sumit > > > >>>>>>>>> > > > >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > >>>>>>>>> > > > >>>>>>>> > > > >>>>>>>> $ cat keyctl_change > > > >>>>>>>> diff --git a/common.mk b/common.mk > > > >>>>>>>> index aeb7b41..663e528 100644 > > > >>>>>>>> --- a/common.mk > > > >>>>>>>> +++ b/common.mk > > > >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > >>>>>>>> BR2_PACKAGE_STRACE ?= y > > > >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > >>>>>>>> +BR2_PACKAGE_KEYUTILS := y > > > >>>>>>>> > > > >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to > > > >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > >>>>>>>> index 368c18a..832ab74 100644 > > > >>>>>>>> --- a/kconfigs/qemu.conf > > > >>>>>>>> +++ b/kconfigs/qemu.conf > > > >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y > > > >>>>>>>> CONFIG_HW_RANDOM=y > > > >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y > > > >>>>>>>> +CONFIG_TRUSTED_KEYS=y > > > >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y > > > >>>>>>>> > > > >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > > > >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > > > >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the > > > >>>>>>>>> specification. > > > >>>>>>>>> > > > >>>>>>>> > > > >>>>>>>> Sure, I will roll out the next version after your testing. > > > >>>>>>> > > > >>>>>>> Thanks, I'll try this at instant, and give my feedback. > > > >>>>>> > > > >>>>>> I bump into this: > > > >>>>>> > > > >>>>>> $ make run-only > > > >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > > >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > > >>>>>> make: *** [Makefile:194: run-only] Error 1 > > > >>>>>> > > > >>>>> > > > >>>>> Could you check if the following directory tree is built after > > > >>>>> executing the below command? > > > >>>>> > > > >>>>> $ make -j`nproc` > > > >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > > >>>>> > > > >>>>> $ tree out/bin/ > > > >>>>> out/bin/ > > > >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > > > >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > > > >>>>> ├── bl31.bin -> > > > >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > > > >>>>> ├── bl32.bin -> > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > > > >>>>> ├── bl32_extra1.bin -> > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > > > >>>>> ├── bl32_extra2.bin -> > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > > > >>>>> ├── bl33.bin -> > > > >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > > > >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > > > >>>>> └── rootfs.cpio.gz -> > > > >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > > >>>>> > > > >>>>> 0 directories, 9 files > > > >>>>> > > > >>>>> -Sumit > > > >>>> > > > >>>> I actually spotted a build error that was unnoticed last time: > > > >>>> > > > >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > > >>>> /bin/sh: 1: python: not found > > > >>>> > > > >>>> I'd prefer not to install Python2. It has been EOL over a year. > > > >>> > > > >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > > > >>> machine, this is accomplished by installing package "python-is-python3" > > > >>> (after uninstalling "python-is-python2" if need be). > > > >>> > > > >>> $ ls -l /usr/bin/python > > > >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > > > >> > > > >> Right, just found about this in unrelated context :-) [*] > > > >> > > > >> Hope this will work out... > > > >> > > > >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > > > > > Now I get > > > > > > > > Traceback (most recent call last): > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > > > allTests = GetAllTestsSuite() > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > > > import CToolsTests > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > > > import TianoCompress > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > > > for name, item in localItems.iteritems(): > > > > AttributeError: 'dict' object has no attribute 'iteritems' > > > > > > Right. Same here after removing all traces of Python2 from my system :-/ > > > > > > A couple of fixes are needed: > > > 1. EDK2 needs to be upgraded to tag or later [1] > > > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > > > > > [1] https://github.com/OP-TEE/manifest/pull/177 > > > [2] https://github.com/OP-TEE/build/pull/450 > > > > BTW, Is to *really* impossible to test this with plain BuildRoot. It's > > obvious that this forks BR internally. > > > > I mean even if I get this working once, this will feels like a clumsy way > > to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And > > it would be nice to be able to start doing regular ARM testing. > > The main reason to guide you towards the OP-TEE build system is that > you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) > from source. If you don't need to rebuild those then I have prepared a > flash firmware binary blob for your testing (attached flash.bin). So > Qemu cmdline will look like: > > $ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu > cortex-a57 -kernel out/bin/Image -no-acpi -append > 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd > out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp I spentt couple of days to try to get this running. Here's the log: ❯ ./qemu.sh NOTICE: Booting Trusted Firmware NOTICE: BL1: v2.3():v2.3 NOTICE: BL1: Built : 13:28:04, Jan 25 2021 NOTICE: BL1: Booting BL2 NOTICE: BL2: v2.3():v2.3 NOTICE: BL2: Built : 13:28:06, Jan 25 2021 NOTICE: BL1: Booting BL31 NOTICE: BL31: v2.3():v2.3 NOTICE: BL31: Built : 13:28:08, Jan 25 2021 UEFI firmware (version built at 18:49:27 on Nov 18 2019) pflash_write: Write to buffer emulation is flawed pflash_write: Write to buffer emulation is flawed EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map... Booting Linux on physical CPU 0x0000000000 [0x411fd070] Linux version 5.11.0-rc5 (jarkko@suppilovahvero) (aarch64-buildroot-linux-uclibc-gcc.br_real (Buildroot 2021.02-rc1-10-ga72c90b972) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP Thu Feb 11 22:04:53 EET 2021 Machine model: linux,dummy-virt efi: EFI v2.70 by EDK II efi: SMBIOS=0x7f520000 SMBIOS 3.0=0x7f500000 MEMATTR=0x7e59b018 MEMRESERVE=0x7c143f18 Zone ranges: DMA [mem 0x0000000040000000-0x000000007fffffff] DMA32 empty Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000040000000-0x0000000041ffffff] node 0: [mem 0x0000000042200000-0x000000007be3ffff] node 0: [mem 0x000000007be40000-0x000000007c13ffff] node 0: [mem 0x000000007c140000-0x000000007f41ffff] node 0: [mem 0x000000007f420000-0x000000007f4affff] node 0: [mem 0x000000007f4b0000-0x000000007f4cffff] node 0: [mem 0x000000007f4d0000-0x000000007f5dffff] node 0: [mem 0x000000007f5e0000-0x000000007fffffff] Zeroed struct page in unavailable ranges: 864 pages Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] psci: probing for conduit method from DT. psci: PSCIv1.1 detected in firmware. psci: Using standard PSCI v0.2 function IDs psci: Trusted OS migration not required psci: SMC Calling Convention v1.2 percpu: Embedded 21 pages/cpu s48024 r8192 d29800 u86016 Detected PIPT I-cache on CPU0 CPU features: detected: ARM erratum 832075 CPU features: detected: Spectre-v2 CPU features: detected: ARM errata 1165522, 1319367, or 1530923 Built 1 zonelists, mobility grouping on. Total pages: 257536 Kernel command line: root=/dev/vda rw console=ttyAMA0,115200 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 1011284K/1046528K available (6592K kernel code, 804K rwdata, 1460K rodata, 1088K init, 321K bss, 35244K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 rcu: Hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] random: get_random_bytes called from start_kernel+0x340/0x53c with crng_init=0 arch_timer: cp15 timer(s) running at 62.50MHz (virt). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns Console: colour dummy device 80x25 Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) rcu: Hierarchical SRCU implementation. Remapping and enabling EFI services. smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 1 CPU SMP: Total of 1 processors activated. CPU features: detected: 32-bit EL0 Support CPU features: detected: CRC32 instructions CPU: All CPU(s) started at EL1 alternatives: patching kernel code devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 256 (order: 2, 16384 bytes, linear) SMBIOS 3.0.0 present. DMI: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 NET: Registered protocol family 16 DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. ASID allocator initialised with 65536 entries Serial: AMBA PL011 UART driver 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 46, base_baud = 0) is a PL011 rev1 printk: console [ttyAMA0] enabled iommu: Default domain type: Translated vgaarb: loaded SCSI subsystem initialized Registered efivars operations clocksource: Switched to clocksource arch_sys_counter NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 2, 16384 bytes, linear) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) NET: Registered protocol family 1 PCI: CLS 0 bytes, default 64 hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available workingset: timestamp_bits=62 max_order=18 bucket_order=0 fuse: init (API version 7.33) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler mq-deadline registered io scheduler kyber registered pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 pci 0000:00:01.0: reg 0x10: [io 0x0080-0x009f] pci 0000:00:01.0: reg 0x14: [mem 0x10001000-0x10001fff] pci 0000:00:01.0: reg 0x20: [mem 0x8000000000-0x8000003fff 64bit pref] pci 0000:00:01.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] pci 0000:00:02.0: [1af4:1001] type 00 class 0x010000 pci 0000:00:02.0: reg 0x10: [io 0x0000-0x007f] pci 0000:00:02.0: reg 0x14: [mem 0x10000000-0x10000fff] pci 0000:00:02.0: reg 0x20: [mem 0x8000004000-0x8000007fff 64bit pref] pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] pci 0000:00:02.0: BAR 0: assigned [io 0x1000-0x107f] pci 0000:00:01.0: BAR 0: assigned [io 0x1080-0x109f] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) cacheinfo: Unable to detect cache hierarchy for CPU 0 virtio_blk virtio1: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB) SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 40 registered taskstats version 1 EXT4-fs (vda): recovery complete EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. VFS: Mounted root (ext4 filesystem) on device 254:0. devtmpfs: mounted Freeing unused kernel memory: 1088K Run /sbin/init as init process mount: you must be root mount: you must be root mkdir: can't create directory '/dev/pts': Permission denied mkdir: can't create directory '/dev/shm': Permission denied mount: you must be root hostname: sethostname: Operation not permitted Starting syslogd: OK Starting klogd: OK Running sysctl: OK Initializing random number generator: OK Saving random seed: random: dd: uninitialized urandom read (512 bytes read) OK Starting network: ip: RTNETLINK answers: Operation not permitted ip: SIOCSIFFLAGS: Operation not permitted sed: /proc/mounts: No such file or directory Waiting for interface eth0 to appear............... timeout! run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1 FAIL can't open /dev/ttyAMA0: Permission denied can't open /dev/ttyAMA0: Permission denied can't open /dev/ttyAMA0: Permission denied can't open /dev/ttyAMA0: Permission denied And it continues... The qemu command I got did not work "as it is" and because I'm neither too proficient with qemu nor aarch64, it took a while to get something usable. This is my current qemu command: qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu cortex-a57 \ -kernel ~/Projects/tpm/buildroot/output/images/Image \ -no-acpi \ -append 'root=/dev/vda rw console=ttyAMA0,115200 ' \ -drive file=~/Projects/tpm/buildroot/output/images/rootfs.ext4,format=raw \ -smp 1 \ -monitor telnet:127.0.0.1:55555,server,nowait \ -m 1024 -bios ~/Projects/tpm/fw/aarch64-fw.bin -d unimp Then I start QEMU monitor from another terminal with: socat tcp-connect:127.0.0.1:55555 file:`tty`,raw,echo=0 So... what could be the issue with permissions? /Jarkko
On Fri, Feb 12, 2021 at 01:34:31AM +0200, Jarkko Sakkinen wrote: > On Mon, Jan 25, 2021 at 02:47:38PM +0530, Sumit Garg wrote: > > Hi Jarkko, > > > > On Fri, 22 Jan 2021 at 23:42, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > > > > > > > > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > > > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > > > > >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > > >>> > > > > >>> > > > > >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > > > >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > > > > >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > >>>>>> > > > > >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > > > >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > > >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > >>>>>>>>> > > > > >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > > >>>>>>>>>> Hi Jarkko, > > > > >>>>>>>>>> > > > > >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > > > > >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. > > > > >>>>>>>>>>>> > > > > >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > > > > >>>>>>>>>>>> > > > > >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > > > > >>>>>>>>>>> just a blank screen: > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > > > > >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > >>>>>>>>>>> in the master branch. > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> To create identical images you just need to > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> $ make tpmdd_defconfig && make > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > > > > >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run > > > > >>>>>>>>>>> aarch64 environment available. > > > > >>>>>>>>>> > > > > >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test > > > > >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > > >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > > >>>>>>>>>> system [2]. And then it would be easier to migrate them to your > > > > >>>>>>>>>> buildroot environment as well. > > > > >>>>>>>>>> > > > > >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > > >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > >>>>>>>>>> > > > > >>>>>>>>>> -Sumit > > > > >>>>>>>>> > > > > >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > >>>>>>>>> > > > > >>>>>>>> > > > > >>>>>>>> $ cat keyctl_change > > > > >>>>>>>> diff --git a/common.mk b/common.mk > > > > >>>>>>>> index aeb7b41..663e528 100644 > > > > >>>>>>>> --- a/common.mk > > > > >>>>>>>> +++ b/common.mk > > > > >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > > >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > > >>>>>>>> BR2_PACKAGE_STRACE ?= y > > > > >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > > >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > > >>>>>>>> +BR2_PACKAGE_KEYUTILS := y > > > > >>>>>>>> > > > > >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to > > > > >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > > >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > > >>>>>>>> index 368c18a..832ab74 100644 > > > > >>>>>>>> --- a/kconfigs/qemu.conf > > > > >>>>>>>> +++ b/kconfigs/qemu.conf > > > > >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > > >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y > > > > >>>>>>>> CONFIG_HW_RANDOM=y > > > > >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y > > > > >>>>>>>> +CONFIG_TRUSTED_KEYS=y > > > > >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y > > > > >>>>>>>> > > > > >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > > > > >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > > > > >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the > > > > >>>>>>>>> specification. > > > > >>>>>>>>> > > > > >>>>>>>> > > > > >>>>>>>> Sure, I will roll out the next version after your testing. > > > > >>>>>>> > > > > >>>>>>> Thanks, I'll try this at instant, and give my feedback. > > > > >>>>>> > > > > >>>>>> I bump into this: > > > > >>>>>> > > > > >>>>>> $ make run-only > > > > >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > > > >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > > > >>>>>> make: *** [Makefile:194: run-only] Error 1 > > > > >>>>>> > > > > >>>>> > > > > >>>>> Could you check if the following directory tree is built after > > > > >>>>> executing the below command? > > > > >>>>> > > > > >>>>> $ make -j`nproc` > > > > >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > > > >>>>> > > > > >>>>> $ tree out/bin/ > > > > >>>>> out/bin/ > > > > >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > > > > >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > > > > >>>>> ├── bl31.bin -> > > > > >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > > > > >>>>> ├── bl32.bin -> > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > > > > >>>>> ├── bl32_extra1.bin -> > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > > > > >>>>> ├── bl32_extra2.bin -> > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > > > > >>>>> ├── bl33.bin -> > > > > >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > > > > >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > > > > >>>>> └── rootfs.cpio.gz -> > > > > >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > > > >>>>> > > > > >>>>> 0 directories, 9 files > > > > >>>>> > > > > >>>>> -Sumit > > > > >>>> > > > > >>>> I actually spotted a build error that was unnoticed last time: > > > > >>>> > > > > >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > > > >>>> /bin/sh: 1: python: not found > > > > >>>> > > > > >>>> I'd prefer not to install Python2. It has been EOL over a year. > > > > >>> > > > > >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > > > > >>> machine, this is accomplished by installing package "python-is-python3" > > > > >>> (after uninstalling "python-is-python2" if need be). > > > > >>> > > > > >>> $ ls -l /usr/bin/python > > > > >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > > > > >> > > > > >> Right, just found about this in unrelated context :-) [*] > > > > >> > > > > >> Hope this will work out... > > > > >> > > > > >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > > > > > > > Now I get > > > > > > > > > > Traceback (most recent call last): > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > > > > allTests = GetAllTestsSuite() > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > > > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > > > > import CToolsTests > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > > > > import TianoCompress > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > > > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > > > > for name, item in localItems.iteritems(): > > > > > AttributeError: 'dict' object has no attribute 'iteritems' > > > > > > > > Right. Same here after removing all traces of Python2 from my system :-/ > > > > > > > > A couple of fixes are needed: > > > > 1. EDK2 needs to be upgraded to tag or later [1] > > > > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > > > > > > > [1] https://github.com/OP-TEE/manifest/pull/177 > > > > [2] https://github.com/OP-TEE/build/pull/450 > > > > > > BTW, Is to *really* impossible to test this with plain BuildRoot. It's > > > obvious that this forks BR internally. > > > > > > I mean even if I get this working once, this will feels like a clumsy way > > > to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And > > > it would be nice to be able to start doing regular ARM testing. > > > > The main reason to guide you towards the OP-TEE build system is that > > you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) > > from source. If you don't need to rebuild those then I have prepared a > > flash firmware binary blob for your testing (attached flash.bin). So > > Qemu cmdline will look like: > > > > $ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu > > cortex-a57 -kernel out/bin/Image -no-acpi -append > > 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd > > out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp > > I spentt couple of days to try to get this running. > > Here's the log: > > ❯ ./qemu.sh > NOTICE: Booting Trusted Firmware > NOTICE: BL1: v2.3():v2.3 > NOTICE: BL1: Built : 13:28:04, Jan 25 2021 > NOTICE: BL1: Booting BL2 > NOTICE: BL2: v2.3():v2.3 > NOTICE: BL2: Built : 13:28:06, Jan 25 2021 > NOTICE: BL1: Booting BL31 > NOTICE: BL31: v2.3():v2.3 > NOTICE: BL31: Built : 13:28:08, Jan 25 2021 > UEFI firmware (version built at 18:49:27 on Nov 18 2019) > pflash_write: Write to buffer emulation is flawed > pflash_write: Write to buffer emulation is flawed > EFI stub: Booting Linux Kernel... > EFI stub: Using DTB from configuration table > EFI stub: Exiting boot services and installing virtual address map... > Booting Linux on physical CPU 0x0000000000 [0x411fd070] > Linux version 5.11.0-rc5 (jarkko@suppilovahvero) (aarch64-buildroot-linux-uclibc-gcc.br_real (Buildroot 2021.02-rc1-10-ga72c90b972) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP Thu Feb 11 22:04:53 EET 2021 > Machine model: linux,dummy-virt > efi: EFI v2.70 by EDK II > efi: SMBIOS=0x7f520000 SMBIOS 3.0=0x7f500000 MEMATTR=0x7e59b018 MEMRESERVE=0x7c143f18 > Zone ranges: > DMA [mem 0x0000000040000000-0x000000007fffffff] > DMA32 empty > Normal empty > Movable zone start for each node > Early memory node ranges > node 0: [mem 0x0000000040000000-0x0000000041ffffff] > node 0: [mem 0x0000000042200000-0x000000007be3ffff] > node 0: [mem 0x000000007be40000-0x000000007c13ffff] > node 0: [mem 0x000000007c140000-0x000000007f41ffff] > node 0: [mem 0x000000007f420000-0x000000007f4affff] > node 0: [mem 0x000000007f4b0000-0x000000007f4cffff] > node 0: [mem 0x000000007f4d0000-0x000000007f5dffff] > node 0: [mem 0x000000007f5e0000-0x000000007fffffff] > Zeroed struct page in unavailable ranges: 864 pages > Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] > psci: probing for conduit method from DT. > psci: PSCIv1.1 detected in firmware. > psci: Using standard PSCI v0.2 function IDs > psci: Trusted OS migration not required > psci: SMC Calling Convention v1.2 > percpu: Embedded 21 pages/cpu s48024 r8192 d29800 u86016 > Detected PIPT I-cache on CPU0 > CPU features: detected: ARM erratum 832075 > CPU features: detected: Spectre-v2 > CPU features: detected: ARM errata 1165522, 1319367, or 1530923 > Built 1 zonelists, mobility grouping on. Total pages: 257536 > Kernel command line: root=/dev/vda rw console=ttyAMA0,115200 > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) > mem auto-init: stack:off, heap alloc:off, heap free:off > Memory: 1011284K/1046528K available (6592K kernel code, 804K rwdata, 1460K rodata, 1088K init, 321K bss, 35244K reserved, 0K cma-reserved) > SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > rcu: Hierarchical RCU implementation. > rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. > rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. > rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 > NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] > random: get_random_bytes called from start_kernel+0x340/0x53c with crng_init=0 > arch_timer: cp15 timer(s) running at 62.50MHz (virt). > clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns > sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns > Console: colour dummy device 80x25 > Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) > pid_max: default: 32768 minimum: 301 > Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > rcu: Hierarchical SRCU implementation. > Remapping and enabling EFI services. > smp: Bringing up secondary CPUs ... > smp: Brought up 1 node, 1 CPU > SMP: Total of 1 processors activated. > CPU features: detected: 32-bit EL0 Support > CPU features: detected: CRC32 instructions > CPU: All CPU(s) started at EL1 > alternatives: patching kernel code > devtmpfs: initialized > clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns > futex hash table entries: 256 (order: 2, 16384 bytes, linear) > SMBIOS 3.0.0 present. > DMI: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 > NET: Registered protocol family 16 > DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations > hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. > ASID allocator initialised with 65536 entries > Serial: AMBA PL011 UART driver > 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 46, base_baud = 0) is a PL011 rev1 > printk: console [ttyAMA0] enabled > iommu: Default domain type: Translated > vgaarb: loaded > SCSI subsystem initialized > Registered efivars operations > clocksource: Switched to clocksource arch_sys_counter > NET: Registered protocol family 2 > tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) > TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) > TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) > TCP: Hash tables configured (established 8192 bind 8192) > UDP hash table entries: 512 (order: 2, 16384 bytes, linear) > UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) > NET: Registered protocol family 1 > PCI: CLS 0 bytes, default 64 > hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available > workingset: timestamp_bits=62 max_order=18 bucket_order=0 > fuse: init (API version 7.33) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > io scheduler mq-deadline registered > io scheduler kyber registered > pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: > pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 > pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 > pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 > pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits > pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] > pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [bus 00-ff] > pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] > pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] > pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 > pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 > pci 0000:00:01.0: reg 0x10: [io 0x0080-0x009f] > pci 0000:00:01.0: reg 0x14: [mem 0x10001000-0x10001fff] > pci 0000:00:01.0: reg 0x20: [mem 0x8000000000-0x8000003fff 64bit pref] > pci 0000:00:01.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] > pci 0000:00:02.0: [1af4:1001] type 00 class 0x010000 > pci 0000:00:02.0: reg 0x10: [io 0x0000-0x007f] > pci 0000:00:02.0: reg 0x14: [mem 0x10000000-0x10000fff] > pci 0000:00:02.0: reg 0x20: [mem 0x8000004000-0x8000007fff 64bit pref] > pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] > pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] > pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] > pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] > pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] > pci 0000:00:02.0: BAR 0: assigned [io 0x1000-0x107f] > pci 0000:00:01.0: BAR 0: assigned [io 0x1080-0x109f] > virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) > virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) > cacheinfo: Unable to detect cache hierarchy for CPU 0 > virtio_blk virtio1: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB) > SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd > NET: Registered protocol family 10 > Segment Routing with IPv6 > sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > NET: Registered protocol family 17 > NET: Registered protocol family 15 > NET: Registered protocol family 40 > registered taskstats version 1 > EXT4-fs (vda): recovery complete > EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. > VFS: Mounted root (ext4 filesystem) on device 254:0. > devtmpfs: mounted > Freeing unused kernel memory: 1088K > Run /sbin/init as init process > mount: you must be root > mount: you must be root > mkdir: can't create directory '/dev/pts': Permission denied > mkdir: can't create directory '/dev/shm': Permission denied > mount: you must be root > hostname: sethostname: Operation not permitted > Starting syslogd: OK > Starting klogd: OK > Running sysctl: OK > Initializing random number generator: OK > Saving random seed: random: dd: uninitialized urandom read (512 bytes read) > OK > Starting network: ip: RTNETLINK answers: Operation not permitted > ip: SIOCSIFFLAGS: Operation not permitted > sed: /proc/mounts: No such file or directory > Waiting for interface eth0 to appear............... timeout! > run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1 > FAIL > can't open /dev/ttyAMA0: Permission denied > can't open /dev/ttyAMA0: Permission denied > can't open /dev/ttyAMA0: Permission denied > can't open /dev/ttyAMA0: Permission denied > > And it continues... > > The qemu command I got did not work "as it is" and because I'm neither too > proficient with qemu nor aarch64, it took a while to get something usable. > This is my current qemu command: > > qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu cortex-a57 \ > -kernel ~/Projects/tpm/buildroot/output/images/Image \ > -no-acpi \ > -append 'root=/dev/vda rw console=ttyAMA0,115200 ' \ > -drive file=~/Projects/tpm/buildroot/output/images/rootfs.ext4,format=raw \ > -smp 1 \ > -monitor telnet:127.0.0.1:55555,server,nowait \ > -m 1024 -bios ~/Projects/tpm/fw/aarch64-fw.bin -d unimp > > Then I start QEMU monitor from another terminal with: > > socat tcp-connect:127.0.0.1:55555 file:`tty`,raw,echo=0 > > So... what could be the issue with permissions? NOTE: aarch64-fw.bin is the binary file for FW that you provided. I just renamed it. /Jarkko
On Fri, 12 Feb 2021 at 05:04, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > On Mon, Jan 25, 2021 at 02:47:38PM +0530, Sumit Garg wrote: > > Hi Jarkko, > > > > On Fri, 22 Jan 2021 at 23:42, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > > > > > > > > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > > > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > > > > >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > > >>> > > > > >>> > > > > >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > > > >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > > > > >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > >>>>>> > > > > >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > > > >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > > >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > >>>>>>>>> > > > > >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > > >>>>>>>>>> Hi Jarkko, > > > > >>>>>>>>>> > > > > >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > > > > >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. > > > > >>>>>>>>>>>> > > > > >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > > > > >>>>>>>>>>>> > > > > >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > > > > >>>>>>>>>>> just a blank screen: > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > > > > >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > >>>>>>>>>>> in the master branch. > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> To create identical images you just need to > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> $ make tpmdd_defconfig && make > > > > >>>>>>>>>>> > > > > >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > > > > >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run > > > > >>>>>>>>>>> aarch64 environment available. > > > > >>>>>>>>>> > > > > >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test > > > > >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > > >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > > >>>>>>>>>> system [2]. And then it would be easier to migrate them to your > > > > >>>>>>>>>> buildroot environment as well. > > > > >>>>>>>>>> > > > > >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > > >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > >>>>>>>>>> > > > > >>>>>>>>>> -Sumit > > > > >>>>>>>>> > > > > >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > >>>>>>>>> > > > > >>>>>>>> > > > > >>>>>>>> $ cat keyctl_change > > > > >>>>>>>> diff --git a/common.mk b/common.mk > > > > >>>>>>>> index aeb7b41..663e528 100644 > > > > >>>>>>>> --- a/common.mk > > > > >>>>>>>> +++ b/common.mk > > > > >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > > >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > > >>>>>>>> BR2_PACKAGE_STRACE ?= y > > > > >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > > >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > > >>>>>>>> +BR2_PACKAGE_KEYUTILS := y > > > > >>>>>>>> > > > > >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to > > > > >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > > >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > > >>>>>>>> index 368c18a..832ab74 100644 > > > > >>>>>>>> --- a/kconfigs/qemu.conf > > > > >>>>>>>> +++ b/kconfigs/qemu.conf > > > > >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > > >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y > > > > >>>>>>>> CONFIG_HW_RANDOM=y > > > > >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y > > > > >>>>>>>> +CONFIG_TRUSTED_KEYS=y > > > > >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y > > > > >>>>>>>> > > > > >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > > > > >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > > > > >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the > > > > >>>>>>>>> specification. > > > > >>>>>>>>> > > > > >>>>>>>> > > > > >>>>>>>> Sure, I will roll out the next version after your testing. > > > > >>>>>>> > > > > >>>>>>> Thanks, I'll try this at instant, and give my feedback. > > > > >>>>>> > > > > >>>>>> I bump into this: > > > > >>>>>> > > > > >>>>>> $ make run-only > > > > >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > > > >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > > > >>>>>> make: *** [Makefile:194: run-only] Error 1 > > > > >>>>>> > > > > >>>>> > > > > >>>>> Could you check if the following directory tree is built after > > > > >>>>> executing the below command? > > > > >>>>> > > > > >>>>> $ make -j`nproc` > > > > >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > > > >>>>> > > > > >>>>> $ tree out/bin/ > > > > >>>>> out/bin/ > > > > >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > > > > >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > > > > >>>>> ├── bl31.bin -> > > > > >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > > > > >>>>> ├── bl32.bin -> > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > > > > >>>>> ├── bl32_extra1.bin -> > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > > > > >>>>> ├── bl32_extra2.bin -> > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > > > > >>>>> ├── bl33.bin -> > > > > >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > > > > >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > > > > >>>>> └── rootfs.cpio.gz -> > > > > >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > > > >>>>> > > > > >>>>> 0 directories, 9 files > > > > >>>>> > > > > >>>>> -Sumit > > > > >>>> > > > > >>>> I actually spotted a build error that was unnoticed last time: > > > > >>>> > > > > >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > > > >>>> /bin/sh: 1: python: not found > > > > >>>> > > > > >>>> I'd prefer not to install Python2. It has been EOL over a year. > > > > >>> > > > > >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > > > > >>> machine, this is accomplished by installing package "python-is-python3" > > > > >>> (after uninstalling "python-is-python2" if need be). > > > > >>> > > > > >>> $ ls -l /usr/bin/python > > > > >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > > > > >> > > > > >> Right, just found about this in unrelated context :-) [*] > > > > >> > > > > >> Hope this will work out... > > > > >> > > > > >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > > > > > > > Now I get > > > > > > > > > > Traceback (most recent call last): > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > > > > allTests = GetAllTestsSuite() > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > > > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > > > > import CToolsTests > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > > > > import TianoCompress > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > > > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > > > > for name, item in localItems.iteritems(): > > > > > AttributeError: 'dict' object has no attribute 'iteritems' > > > > > > > > Right. Same here after removing all traces of Python2 from my system :-/ > > > > > > > > A couple of fixes are needed: > > > > 1. EDK2 needs to be upgraded to tag or later [1] > > > > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > > > > > > > [1] https://github.com/OP-TEE/manifest/pull/177 > > > > [2] https://github.com/OP-TEE/build/pull/450 > > > > > > BTW, Is to *really* impossible to test this with plain BuildRoot. It's > > > obvious that this forks BR internally. > > > > > > I mean even if I get this working once, this will feels like a clumsy way > > > to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And > > > it would be nice to be able to start doing regular ARM testing. > > > > The main reason to guide you towards the OP-TEE build system is that > > you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) > > from source. If you don't need to rebuild those then I have prepared a > > flash firmware binary blob for your testing (attached flash.bin). So > > Qemu cmdline will look like: > > > > $ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu > > cortex-a57 -kernel out/bin/Image -no-acpi -append > > 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd > > out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp > > I spentt couple of days to try to get this running. > > Here's the log: > > ❯ ./qemu.sh > NOTICE: Booting Trusted Firmware > NOTICE: BL1: v2.3():v2.3 > NOTICE: BL1: Built : 13:28:04, Jan 25 2021 > NOTICE: BL1: Booting BL2 > NOTICE: BL2: v2.3():v2.3 > NOTICE: BL2: Built : 13:28:06, Jan 25 2021 > NOTICE: BL1: Booting BL31 > NOTICE: BL31: v2.3():v2.3 > NOTICE: BL31: Built : 13:28:08, Jan 25 2021 > UEFI firmware (version built at 18:49:27 on Nov 18 2019) > pflash_write: Write to buffer emulation is flawed > pflash_write: Write to buffer emulation is flawed > EFI stub: Booting Linux Kernel... > EFI stub: Using DTB from configuration table > EFI stub: Exiting boot services and installing virtual address map... > Booting Linux on physical CPU 0x0000000000 [0x411fd070] > Linux version 5.11.0-rc5 (jarkko@suppilovahvero) (aarch64-buildroot-linux-uclibc-gcc.br_real (Buildroot 2021.02-rc1-10-ga72c90b972) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP Thu Feb 11 22:04:53 EET 2021 > Machine model: linux,dummy-virt > efi: EFI v2.70 by EDK II > efi: SMBIOS=0x7f520000 SMBIOS 3.0=0x7f500000 MEMATTR=0x7e59b018 MEMRESERVE=0x7c143f18 > Zone ranges: > DMA [mem 0x0000000040000000-0x000000007fffffff] > DMA32 empty > Normal empty > Movable zone start for each node > Early memory node ranges > node 0: [mem 0x0000000040000000-0x0000000041ffffff] > node 0: [mem 0x0000000042200000-0x000000007be3ffff] > node 0: [mem 0x000000007be40000-0x000000007c13ffff] > node 0: [mem 0x000000007c140000-0x000000007f41ffff] > node 0: [mem 0x000000007f420000-0x000000007f4affff] > node 0: [mem 0x000000007f4b0000-0x000000007f4cffff] > node 0: [mem 0x000000007f4d0000-0x000000007f5dffff] > node 0: [mem 0x000000007f5e0000-0x000000007fffffff] > Zeroed struct page in unavailable ranges: 864 pages > Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] > psci: probing for conduit method from DT. > psci: PSCIv1.1 detected in firmware. > psci: Using standard PSCI v0.2 function IDs > psci: Trusted OS migration not required > psci: SMC Calling Convention v1.2 > percpu: Embedded 21 pages/cpu s48024 r8192 d29800 u86016 > Detected PIPT I-cache on CPU0 > CPU features: detected: ARM erratum 832075 > CPU features: detected: Spectre-v2 > CPU features: detected: ARM errata 1165522, 1319367, or 1530923 > Built 1 zonelists, mobility grouping on. Total pages: 257536 > Kernel command line: root=/dev/vda rw console=ttyAMA0,115200 > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) > mem auto-init: stack:off, heap alloc:off, heap free:off > Memory: 1011284K/1046528K available (6592K kernel code, 804K rwdata, 1460K rodata, 1088K init, 321K bss, 35244K reserved, 0K cma-reserved) > SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > rcu: Hierarchical RCU implementation. > rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. > rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. > rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 > NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] > random: get_random_bytes called from start_kernel+0x340/0x53c with crng_init=0 > arch_timer: cp15 timer(s) running at 62.50MHz (virt). > clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns > sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns > Console: colour dummy device 80x25 > Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) > pid_max: default: 32768 minimum: 301 > Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > rcu: Hierarchical SRCU implementation. > Remapping and enabling EFI services. > smp: Bringing up secondary CPUs ... > smp: Brought up 1 node, 1 CPU > SMP: Total of 1 processors activated. > CPU features: detected: 32-bit EL0 Support > CPU features: detected: CRC32 instructions > CPU: All CPU(s) started at EL1 > alternatives: patching kernel code > devtmpfs: initialized > clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns > futex hash table entries: 256 (order: 2, 16384 bytes, linear) > SMBIOS 3.0.0 present. > DMI: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 > NET: Registered protocol family 16 > DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations > hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. > ASID allocator initialised with 65536 entries > Serial: AMBA PL011 UART driver > 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 46, base_baud = 0) is a PL011 rev1 > printk: console [ttyAMA0] enabled > iommu: Default domain type: Translated > vgaarb: loaded > SCSI subsystem initialized > Registered efivars operations > clocksource: Switched to clocksource arch_sys_counter > NET: Registered protocol family 2 > tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) > TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) > TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) > TCP: Hash tables configured (established 8192 bind 8192) > UDP hash table entries: 512 (order: 2, 16384 bytes, linear) > UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) > NET: Registered protocol family 1 > PCI: CLS 0 bytes, default 64 > hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available > workingset: timestamp_bits=62 max_order=18 bucket_order=0 > fuse: init (API version 7.33) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > io scheduler mq-deadline registered > io scheduler kyber registered > pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: > pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 > pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 > pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 > pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits > pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] > pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [bus 00-ff] > pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] > pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] > pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 > pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 > pci 0000:00:01.0: reg 0x10: [io 0x0080-0x009f] > pci 0000:00:01.0: reg 0x14: [mem 0x10001000-0x10001fff] > pci 0000:00:01.0: reg 0x20: [mem 0x8000000000-0x8000003fff 64bit pref] > pci 0000:00:01.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] > pci 0000:00:02.0: [1af4:1001] type 00 class 0x010000 > pci 0000:00:02.0: reg 0x10: [io 0x0000-0x007f] > pci 0000:00:02.0: reg 0x14: [mem 0x10000000-0x10000fff] > pci 0000:00:02.0: reg 0x20: [mem 0x8000004000-0x8000007fff 64bit pref] > pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] > pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] > pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] > pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] > pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] > pci 0000:00:02.0: BAR 0: assigned [io 0x1000-0x107f] > pci 0000:00:01.0: BAR 0: assigned [io 0x1080-0x109f] > virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) > virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) > cacheinfo: Unable to detect cache hierarchy for CPU 0 > virtio_blk virtio1: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB) > SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd > NET: Registered protocol family 10 > Segment Routing with IPv6 > sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > NET: Registered protocol family 17 > NET: Registered protocol family 15 > NET: Registered protocol family 40 > registered taskstats version 1 > EXT4-fs (vda): recovery complete > EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. > VFS: Mounted root (ext4 filesystem) on device 254:0. > devtmpfs: mounted > Freeing unused kernel memory: 1088K > Run /sbin/init as init process > mount: you must be root > mount: you must be root > mkdir: can't create directory '/dev/pts': Permission denied > mkdir: can't create directory '/dev/shm': Permission denied > mount: you must be root > hostname: sethostname: Operation not permitted > Starting syslogd: OK > Starting klogd: OK > Running sysctl: OK > Initializing random number generator: OK > Saving random seed: random: dd: uninitialized urandom read (512 bytes read) > OK > Starting network: ip: RTNETLINK answers: Operation not permitted > ip: SIOCSIFFLAGS: Operation not permitted > sed: /proc/mounts: No such file or directory > Waiting for interface eth0 to appear............... timeout! > run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1 > FAIL > can't open /dev/ttyAMA0: Permission denied > can't open /dev/ttyAMA0: Permission denied > can't open /dev/ttyAMA0: Permission denied > can't open /dev/ttyAMA0: Permission denied > > And it continues... > > The qemu command I got did not work "as it is" and because I'm neither too > proficient with qemu nor aarch64, it took a while to get something usable. > This is my current qemu command: > > qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu cortex-a57 \ > -kernel ~/Projects/tpm/buildroot/output/images/Image \ > -no-acpi \ > -append 'root=/dev/vda rw console=ttyAMA0,115200 ' \ > -drive file=~/Projects/tpm/buildroot/output/images/rootfs.ext4,format=raw \ > -smp 1 \ > -monitor telnet:127.0.0.1:55555,server,nowait \ > -m 1024 -bios ~/Projects/tpm/fw/aarch64-fw.bin -d unimp > > Then I start QEMU monitor from another terminal with: > > socat tcp-connect:127.0.0.1:55555 file:`tty`,raw,echo=0 > > So... what could be the issue with permissions? > It mostly sounds like an issue with your buildroot filesystem. Can you try with this [1] init ramdisk instead? -initrd rootfs.cpio.gz [1] https://people.linaro.org/~sumit.garg/rootfs.cpio.gz -Sumit > /Jarkko
On Mon, Feb 15, 2021 at 06:37:00PM +0530, Sumit Garg wrote: > On Fri, 12 Feb 2021 at 05:04, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > On Mon, Jan 25, 2021 at 02:47:38PM +0530, Sumit Garg wrote: > > > Hi Jarkko, > > > > > > On Fri, 22 Jan 2021 at 23:42, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > > > > > > > > > > > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > > > > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > > > > > >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > > > >>> > > > > > >>> > > > > > >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > > > > >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > > > > > >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > >>>>>> > > > > > >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > > > > >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > > > >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > >>>>>>>>> > > > > > >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > > > >>>>>>>>>> Hi Jarkko, > > > > > >>>>>>>>>> > > > > > >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > >>>>>>>>>>> > > > > > >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > > >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > > > > > >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. > > > > > >>>>>>>>>>>> > > > > > >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > > > > > >>>>>>>>>>>> > > > > > >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > >>>>>>>>>>> > > > > > >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > > > > > >>>>>>>>>>> just a blank screen: > > > > > >>>>>>>>>>> > > > > > >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > > >>>>>>>>>>> > > > > > >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > > > > > >>>>>>>>>>> > > > > > >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > > >>>>>>>>>>> > > > > > >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > > > > > >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > > >>>>>>>>>>> in the master branch. > > > > > >>>>>>>>>>> > > > > > >>>>>>>>>>> To create identical images you just need to > > > > > >>>>>>>>>>> > > > > > >>>>>>>>>>> $ make tpmdd_defconfig && make > > > > > >>>>>>>>>>> > > > > > >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > > > > > >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run > > > > > >>>>>>>>>>> aarch64 environment available. > > > > > >>>>>>>>>> > > > > > >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test > > > > > >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > > > >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > > > >>>>>>>>>> system [2]. And then it would be easier to migrate them to your > > > > > >>>>>>>>>> buildroot environment as well. > > > > > >>>>>>>>>> > > > > > >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > > > >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > > >>>>>>>>>> > > > > > >>>>>>>>>> -Sumit > > > > > >>>>>>>>> > > > > > >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > > >>>>>>>>> > > > > > >>>>>>>> > > > > > >>>>>>>> $ cat keyctl_change > > > > > >>>>>>>> diff --git a/common.mk b/common.mk > > > > > >>>>>>>> index aeb7b41..663e528 100644 > > > > > >>>>>>>> --- a/common.mk > > > > > >>>>>>>> +++ b/common.mk > > > > > >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > > > >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > > > >>>>>>>> BR2_PACKAGE_STRACE ?= y > > > > > >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > > > >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > > > >>>>>>>> +BR2_PACKAGE_KEYUTILS := y > > > > > >>>>>>>> > > > > > >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to > > > > > >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > > > >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > > > >>>>>>>> index 368c18a..832ab74 100644 > > > > > >>>>>>>> --- a/kconfigs/qemu.conf > > > > > >>>>>>>> +++ b/kconfigs/qemu.conf > > > > > >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > > > >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y > > > > > >>>>>>>> CONFIG_HW_RANDOM=y > > > > > >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y > > > > > >>>>>>>> +CONFIG_TRUSTED_KEYS=y > > > > > >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y > > > > > >>>>>>>> > > > > > >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > > > > > >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > > > > > >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the > > > > > >>>>>>>>> specification. > > > > > >>>>>>>>> > > > > > >>>>>>>> > > > > > >>>>>>>> Sure, I will roll out the next version after your testing. > > > > > >>>>>>> > > > > > >>>>>>> Thanks, I'll try this at instant, and give my feedback. > > > > > >>>>>> > > > > > >>>>>> I bump into this: > > > > > >>>>>> > > > > > >>>>>> $ make run-only > > > > > >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > > > > >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > > > > >>>>>> make: *** [Makefile:194: run-only] Error 1 > > > > > >>>>>> > > > > > >>>>> > > > > > >>>>> Could you check if the following directory tree is built after > > > > > >>>>> executing the below command? > > > > > >>>>> > > > > > >>>>> $ make -j`nproc` > > > > > >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > > > > >>>>> > > > > > >>>>> $ tree out/bin/ > > > > > >>>>> out/bin/ > > > > > >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > > > > > >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > > > > > >>>>> ├── bl31.bin -> > > > > > >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > > > > > >>>>> ├── bl32.bin -> > > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > > > > > >>>>> ├── bl32_extra1.bin -> > > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > > > > > >>>>> ├── bl32_extra2.bin -> > > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > > > > > >>>>> ├── bl33.bin -> > > > > > >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > > > > > >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > > > > > >>>>> └── rootfs.cpio.gz -> > > > > > >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > > > > >>>>> > > > > > >>>>> 0 directories, 9 files > > > > > >>>>> > > > > > >>>>> -Sumit > > > > > >>>> > > > > > >>>> I actually spotted a build error that was unnoticed last time: > > > > > >>>> > > > > > >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > > > > >>>> /bin/sh: 1: python: not found > > > > > >>>> > > > > > >>>> I'd prefer not to install Python2. It has been EOL over a year. > > > > > >>> > > > > > >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > > > > > >>> machine, this is accomplished by installing package "python-is-python3" > > > > > >>> (after uninstalling "python-is-python2" if need be). > > > > > >>> > > > > > >>> $ ls -l /usr/bin/python > > > > > >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > > > > > >> > > > > > >> Right, just found about this in unrelated context :-) [*] > > > > > >> > > > > > >> Hope this will work out... > > > > > >> > > > > > >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > > > > > > > > > Now I get > > > > > > > > > > > > Traceback (most recent call last): > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > > > > > allTests = GetAllTestsSuite() > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > > > > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > > > > > import CToolsTests > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > > > > > import TianoCompress > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > > > > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > > > > > for name, item in localItems.iteritems(): > > > > > > AttributeError: 'dict' object has no attribute 'iteritems' > > > > > > > > > > Right. Same here after removing all traces of Python2 from my system :-/ > > > > > > > > > > A couple of fixes are needed: > > > > > 1. EDK2 needs to be upgraded to tag or later [1] > > > > > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > > > > > > > > > [1] https://github.com/OP-TEE/manifest/pull/177 > > > > > [2] https://github.com/OP-TEE/build/pull/450 > > > > > > > > BTW, Is to *really* impossible to test this with plain BuildRoot. It's > > > > obvious that this forks BR internally. > > > > > > > > I mean even if I get this working once, this will feels like a clumsy way > > > > to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And > > > > it would be nice to be able to start doing regular ARM testing. > > > > > > The main reason to guide you towards the OP-TEE build system is that > > > you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) > > > from source. If you don't need to rebuild those then I have prepared a > > > flash firmware binary blob for your testing (attached flash.bin). So > > > Qemu cmdline will look like: > > > > > > $ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu > > > cortex-a57 -kernel out/bin/Image -no-acpi -append > > > 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd > > > out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp > > > > I spentt couple of days to try to get this running. > > > > Here's the log: > > > > ❯ ./qemu.sh > > NOTICE: Booting Trusted Firmware > > NOTICE: BL1: v2.3():v2.3 > > NOTICE: BL1: Built : 13:28:04, Jan 25 2021 > > NOTICE: BL1: Booting BL2 > > NOTICE: BL2: v2.3():v2.3 > > NOTICE: BL2: Built : 13:28:06, Jan 25 2021 > > NOTICE: BL1: Booting BL31 > > NOTICE: BL31: v2.3():v2.3 > > NOTICE: BL31: Built : 13:28:08, Jan 25 2021 > > UEFI firmware (version built at 18:49:27 on Nov 18 2019) > > pflash_write: Write to buffer emulation is flawed > > pflash_write: Write to buffer emulation is flawed > > EFI stub: Booting Linux Kernel... > > EFI stub: Using DTB from configuration table > > EFI stub: Exiting boot services and installing virtual address map... > > Booting Linux on physical CPU 0x0000000000 [0x411fd070] > > Linux version 5.11.0-rc5 (jarkko@suppilovahvero) (aarch64-buildroot-linux-uclibc-gcc.br_real (Buildroot 2021.02-rc1-10-ga72c90b972) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP Thu Feb 11 22:04:53 EET 2021 > > Machine model: linux,dummy-virt > > efi: EFI v2.70 by EDK II > > efi: SMBIOS=0x7f520000 SMBIOS 3.0=0x7f500000 MEMATTR=0x7e59b018 MEMRESERVE=0x7c143f18 > > Zone ranges: > > DMA [mem 0x0000000040000000-0x000000007fffffff] > > DMA32 empty > > Normal empty > > Movable zone start for each node > > Early memory node ranges > > node 0: [mem 0x0000000040000000-0x0000000041ffffff] > > node 0: [mem 0x0000000042200000-0x000000007be3ffff] > > node 0: [mem 0x000000007be40000-0x000000007c13ffff] > > node 0: [mem 0x000000007c140000-0x000000007f41ffff] > > node 0: [mem 0x000000007f420000-0x000000007f4affff] > > node 0: [mem 0x000000007f4b0000-0x000000007f4cffff] > > node 0: [mem 0x000000007f4d0000-0x000000007f5dffff] > > node 0: [mem 0x000000007f5e0000-0x000000007fffffff] > > Zeroed struct page in unavailable ranges: 864 pages > > Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] > > psci: probing for conduit method from DT. > > psci: PSCIv1.1 detected in firmware. > > psci: Using standard PSCI v0.2 function IDs > > psci: Trusted OS migration not required > > psci: SMC Calling Convention v1.2 > > percpu: Embedded 21 pages/cpu s48024 r8192 d29800 u86016 > > Detected PIPT I-cache on CPU0 > > CPU features: detected: ARM erratum 832075 > > CPU features: detected: Spectre-v2 > > CPU features: detected: ARM errata 1165522, 1319367, or 1530923 > > Built 1 zonelists, mobility grouping on. Total pages: 257536 > > Kernel command line: root=/dev/vda rw console=ttyAMA0,115200 > > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) > > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) > > mem auto-init: stack:off, heap alloc:off, heap free:off > > Memory: 1011284K/1046528K available (6592K kernel code, 804K rwdata, 1460K rodata, 1088K init, 321K bss, 35244K reserved, 0K cma-reserved) > > SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > rcu: Hierarchical RCU implementation. > > rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. > > rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. > > rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 > > NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > > GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] > > random: get_random_bytes called from start_kernel+0x340/0x53c with crng_init=0 > > arch_timer: cp15 timer(s) running at 62.50MHz (virt). > > clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns > > sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns > > Console: colour dummy device 80x25 > > Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) > > pid_max: default: 32768 minimum: 301 > > Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > > Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > > rcu: Hierarchical SRCU implementation. > > Remapping and enabling EFI services. > > smp: Bringing up secondary CPUs ... > > smp: Brought up 1 node, 1 CPU > > SMP: Total of 1 processors activated. > > CPU features: detected: 32-bit EL0 Support > > CPU features: detected: CRC32 instructions > > CPU: All CPU(s) started at EL1 > > alternatives: patching kernel code > > devtmpfs: initialized > > clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns > > futex hash table entries: 256 (order: 2, 16384 bytes, linear) > > SMBIOS 3.0.0 present. > > DMI: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 > > NET: Registered protocol family 16 > > DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations > > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations > > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations > > hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. > > ASID allocator initialised with 65536 entries > > Serial: AMBA PL011 UART driver > > 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 46, base_baud = 0) is a PL011 rev1 > > printk: console [ttyAMA0] enabled > > iommu: Default domain type: Translated > > vgaarb: loaded > > SCSI subsystem initialized > > Registered efivars operations > > clocksource: Switched to clocksource arch_sys_counter > > NET: Registered protocol family 2 > > tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) > > TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) > > TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) > > TCP: Hash tables configured (established 8192 bind 8192) > > UDP hash table entries: 512 (order: 2, 16384 bytes, linear) > > UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) > > NET: Registered protocol family 1 > > PCI: CLS 0 bytes, default 64 > > hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available > > workingset: timestamp_bits=62 max_order=18 bucket_order=0 > > fuse: init (API version 7.33) > > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > > io scheduler mq-deadline registered > > io scheduler kyber registered > > pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: > > pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 > > pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 > > pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 > > pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits > > pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] > > pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 > > pci_bus 0000:00: root bus resource [bus 00-ff] > > pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > > pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] > > pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] > > pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 > > pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 > > pci 0000:00:01.0: reg 0x10: [io 0x0080-0x009f] > > pci 0000:00:01.0: reg 0x14: [mem 0x10001000-0x10001fff] > > pci 0000:00:01.0: reg 0x20: [mem 0x8000000000-0x8000003fff 64bit pref] > > pci 0000:00:01.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] > > pci 0000:00:02.0: [1af4:1001] type 00 class 0x010000 > > pci 0000:00:02.0: reg 0x10: [io 0x0000-0x007f] > > pci 0000:00:02.0: reg 0x14: [mem 0x10000000-0x10000fff] > > pci 0000:00:02.0: reg 0x20: [mem 0x8000004000-0x8000007fff 64bit pref] > > pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] > > pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] > > pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] > > pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] > > pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] > > pci 0000:00:02.0: BAR 0: assigned [io 0x1000-0x107f] > > pci 0000:00:01.0: BAR 0: assigned [io 0x1080-0x109f] > > virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) > > virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) > > cacheinfo: Unable to detect cache hierarchy for CPU 0 > > virtio_blk virtio1: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB) > > SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd > > NET: Registered protocol family 10 > > Segment Routing with IPv6 > > sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > > NET: Registered protocol family 17 > > NET: Registered protocol family 15 > > NET: Registered protocol family 40 > > registered taskstats version 1 > > EXT4-fs (vda): recovery complete > > EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. > > VFS: Mounted root (ext4 filesystem) on device 254:0. > > devtmpfs: mounted > > Freeing unused kernel memory: 1088K > > Run /sbin/init as init process > > mount: you must be root > > mount: you must be root > > mkdir: can't create directory '/dev/pts': Permission denied > > mkdir: can't create directory '/dev/shm': Permission denied > > mount: you must be root > > hostname: sethostname: Operation not permitted > > Starting syslogd: OK > > Starting klogd: OK > > Running sysctl: OK > > Initializing random number generator: OK > > Saving random seed: random: dd: uninitialized urandom read (512 bytes read) > > OK > > Starting network: ip: RTNETLINK answers: Operation not permitted > > ip: SIOCSIFFLAGS: Operation not permitted > > sed: /proc/mounts: No such file or directory > > Waiting for interface eth0 to appear............... timeout! > > run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1 > > FAIL > > can't open /dev/ttyAMA0: Permission denied > > can't open /dev/ttyAMA0: Permission denied > > can't open /dev/ttyAMA0: Permission denied > > can't open /dev/ttyAMA0: Permission denied > > > > And it continues... > > > > The qemu command I got did not work "as it is" and because I'm neither too > > proficient with qemu nor aarch64, it took a while to get something usable. > > This is my current qemu command: > > > > qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu cortex-a57 \ > > -kernel ~/Projects/tpm/buildroot/output/images/Image \ > > -no-acpi \ > > -append 'root=/dev/vda rw console=ttyAMA0,115200 ' \ > > -drive file=~/Projects/tpm/buildroot/output/images/rootfs.ext4,format=raw \ > > -smp 1 \ > > -monitor telnet:127.0.0.1:55555,server,nowait \ > > -m 1024 -bios ~/Projects/tpm/fw/aarch64-fw.bin -d unimp > > > > Then I start QEMU monitor from another terminal with: > > > > socat tcp-connect:127.0.0.1:55555 file:`tty`,raw,echo=0 > > > > So... what could be the issue with permissions? > > > > It mostly sounds like an issue with your buildroot filesystem. > > Can you try with this [1] init ramdisk instead? > > -initrd rootfs.cpio.gz > > [1] https://people.linaro.org/~sumit.garg/rootfs.cpio.gz > > -Sumit That does not include my LKM's. /Jarkko
On Tue, 16 Feb 2021 at 12:59, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > On Mon, Feb 15, 2021 at 06:37:00PM +0530, Sumit Garg wrote: > > On Fri, 12 Feb 2021 at 05:04, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > On Mon, Jan 25, 2021 at 02:47:38PM +0530, Sumit Garg wrote: > > > > Hi Jarkko, > > > > > > > > On Fri, 22 Jan 2021 at 23:42, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > > > On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > > > > > > > > > > > > > > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > > > > > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > > > > > > >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > > > > >>> > > > > > > >>> > > > > > > >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > > > > > >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > > > > > > >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > >>>>>> > > > > > > >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > > > > > >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > > > > >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > >>>>>>>>> > > > > > > >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > > > > >>>>>>>>>> Hi Jarkko, > > > > > > >>>>>>>>>> > > > > > > >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > >>>>>>>>>>> > > > > > > >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > > > >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > > > > > > >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. > > > > > > >>>>>>>>>>>> > > > > > > >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > > > > > > >>>>>>>>>>>> > > > > > > >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > > >>>>>>>>>>> > > > > > > >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > > > > > > >>>>>>>>>>> just a blank screen: > > > > > > >>>>>>>>>>> > > > > > > >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > > > >>>>>>>>>>> > > > > > > >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > > > > > > >>>>>>>>>>> > > > > > > >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > > > >>>>>>>>>>> > > > > > > >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > > > > > > >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > > > >>>>>>>>>>> in the master branch. > > > > > > >>>>>>>>>>> > > > > > > >>>>>>>>>>> To create identical images you just need to > > > > > > >>>>>>>>>>> > > > > > > >>>>>>>>>>> $ make tpmdd_defconfig && make > > > > > > >>>>>>>>>>> > > > > > > >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > > > > > > >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run > > > > > > >>>>>>>>>>> aarch64 environment available. > > > > > > >>>>>>>>>> > > > > > > >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test > > > > > > >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > > > > >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > > > > >>>>>>>>>> system [2]. And then it would be easier to migrate them to your > > > > > > >>>>>>>>>> buildroot environment as well. > > > > > > >>>>>>>>>> > > > > > > >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > > > > >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > > > >>>>>>>>>> > > > > > > >>>>>>>>>> -Sumit > > > > > > >>>>>>>>> > > > > > > >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > > > >>>>>>>>> > > > > > > >>>>>>>> > > > > > > >>>>>>>> $ cat keyctl_change > > > > > > >>>>>>>> diff --git a/common.mk b/common.mk > > > > > > >>>>>>>> index aeb7b41..663e528 100644 > > > > > > >>>>>>>> --- a/common.mk > > > > > > >>>>>>>> +++ b/common.mk > > > > > > >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > > > > >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > > > > >>>>>>>> BR2_PACKAGE_STRACE ?= y > > > > > > >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > > > > >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > > > > >>>>>>>> +BR2_PACKAGE_KEYUTILS := y > > > > > > >>>>>>>> > > > > > > >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to > > > > > > >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > > > > >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > > > > >>>>>>>> index 368c18a..832ab74 100644 > > > > > > >>>>>>>> --- a/kconfigs/qemu.conf > > > > > > >>>>>>>> +++ b/kconfigs/qemu.conf > > > > > > >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > > > > >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y > > > > > > >>>>>>>> CONFIG_HW_RANDOM=y > > > > > > >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y > > > > > > >>>>>>>> +CONFIG_TRUSTED_KEYS=y > > > > > > >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y > > > > > > >>>>>>>> > > > > > > >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > > > > > > >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > > > > > > >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the > > > > > > >>>>>>>>> specification. > > > > > > >>>>>>>>> > > > > > > >>>>>>>> > > > > > > >>>>>>>> Sure, I will roll out the next version after your testing. > > > > > > >>>>>>> > > > > > > >>>>>>> Thanks, I'll try this at instant, and give my feedback. > > > > > > >>>>>> > > > > > > >>>>>> I bump into this: > > > > > > >>>>>> > > > > > > >>>>>> $ make run-only > > > > > > >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > > > > > >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > > > > > >>>>>> make: *** [Makefile:194: run-only] Error 1 > > > > > > >>>>>> > > > > > > >>>>> > > > > > > >>>>> Could you check if the following directory tree is built after > > > > > > >>>>> executing the below command? > > > > > > >>>>> > > > > > > >>>>> $ make -j`nproc` > > > > > > >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > > > > > >>>>> > > > > > > >>>>> $ tree out/bin/ > > > > > > >>>>> out/bin/ > > > > > > >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > > > > > > >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > > > > > > >>>>> ├── bl31.bin -> > > > > > > >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > > > > > > >>>>> ├── bl32.bin -> > > > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > > > > > > >>>>> ├── bl32_extra1.bin -> > > > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > > > > > > >>>>> ├── bl32_extra2.bin -> > > > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > > > > > > >>>>> ├── bl33.bin -> > > > > > > >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > > > > > > >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > > > > > > >>>>> └── rootfs.cpio.gz -> > > > > > > >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > > > > > >>>>> > > > > > > >>>>> 0 directories, 9 files > > > > > > >>>>> > > > > > > >>>>> -Sumit > > > > > > >>>> > > > > > > >>>> I actually spotted a build error that was unnoticed last time: > > > > > > >>>> > > > > > > >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > > > > > >>>> /bin/sh: 1: python: not found > > > > > > >>>> > > > > > > >>>> I'd prefer not to install Python2. It has been EOL over a year. > > > > > > >>> > > > > > > >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > > > > > > >>> machine, this is accomplished by installing package "python-is-python3" > > > > > > >>> (after uninstalling "python-is-python2" if need be). > > > > > > >>> > > > > > > >>> $ ls -l /usr/bin/python > > > > > > >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > > > > > > >> > > > > > > >> Right, just found about this in unrelated context :-) [*] > > > > > > >> > > > > > > >> Hope this will work out... > > > > > > >> > > > > > > >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > > > > > > > > > > > Now I get > > > > > > > > > > > > > > Traceback (most recent call last): > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > > > > > > allTests = GetAllTestsSuite() > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > > > > > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > > > > > > import CToolsTests > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > > > > > > import TianoCompress > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > > > > > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > > > > > > for name, item in localItems.iteritems(): > > > > > > > AttributeError: 'dict' object has no attribute 'iteritems' > > > > > > > > > > > > Right. Same here after removing all traces of Python2 from my system :-/ > > > > > > > > > > > > A couple of fixes are needed: > > > > > > 1. EDK2 needs to be upgraded to tag or later [1] > > > > > > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > > > > > > > > > > > [1] https://github.com/OP-TEE/manifest/pull/177 > > > > > > [2] https://github.com/OP-TEE/build/pull/450 > > > > > > > > > > BTW, Is to *really* impossible to test this with plain BuildRoot. It's > > > > > obvious that this forks BR internally. > > > > > > > > > > I mean even if I get this working once, this will feels like a clumsy way > > > > > to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And > > > > > it would be nice to be able to start doing regular ARM testing. > > > > > > > > The main reason to guide you towards the OP-TEE build system is that > > > > you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) > > > > from source. If you don't need to rebuild those then I have prepared a > > > > flash firmware binary blob for your testing (attached flash.bin). So > > > > Qemu cmdline will look like: > > > > > > > > $ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu > > > > cortex-a57 -kernel out/bin/Image -no-acpi -append > > > > 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd > > > > out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp > > > > > > I spentt couple of days to try to get this running. > > > > > > Here's the log: > > > > > > ❯ ./qemu.sh > > > NOTICE: Booting Trusted Firmware > > > NOTICE: BL1: v2.3():v2.3 > > > NOTICE: BL1: Built : 13:28:04, Jan 25 2021 > > > NOTICE: BL1: Booting BL2 > > > NOTICE: BL2: v2.3():v2.3 > > > NOTICE: BL2: Built : 13:28:06, Jan 25 2021 > > > NOTICE: BL1: Booting BL31 > > > NOTICE: BL31: v2.3():v2.3 > > > NOTICE: BL31: Built : 13:28:08, Jan 25 2021 > > > UEFI firmware (version built at 18:49:27 on Nov 18 2019) > > > pflash_write: Write to buffer emulation is flawed > > > pflash_write: Write to buffer emulation is flawed > > > EFI stub: Booting Linux Kernel... > > > EFI stub: Using DTB from configuration table > > > EFI stub: Exiting boot services and installing virtual address map... > > > Booting Linux on physical CPU 0x0000000000 [0x411fd070] > > > Linux version 5.11.0-rc5 (jarkko@suppilovahvero) (aarch64-buildroot-linux-uclibc-gcc.br_real (Buildroot 2021.02-rc1-10-ga72c90b972) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP Thu Feb 11 22:04:53 EET 2021 > > > Machine model: linux,dummy-virt > > > efi: EFI v2.70 by EDK II > > > efi: SMBIOS=0x7f520000 SMBIOS 3.0=0x7f500000 MEMATTR=0x7e59b018 MEMRESERVE=0x7c143f18 > > > Zone ranges: > > > DMA [mem 0x0000000040000000-0x000000007fffffff] > > > DMA32 empty > > > Normal empty > > > Movable zone start for each node > > > Early memory node ranges > > > node 0: [mem 0x0000000040000000-0x0000000041ffffff] > > > node 0: [mem 0x0000000042200000-0x000000007be3ffff] > > > node 0: [mem 0x000000007be40000-0x000000007c13ffff] > > > node 0: [mem 0x000000007c140000-0x000000007f41ffff] > > > node 0: [mem 0x000000007f420000-0x000000007f4affff] > > > node 0: [mem 0x000000007f4b0000-0x000000007f4cffff] > > > node 0: [mem 0x000000007f4d0000-0x000000007f5dffff] > > > node 0: [mem 0x000000007f5e0000-0x000000007fffffff] > > > Zeroed struct page in unavailable ranges: 864 pages > > > Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] > > > psci: probing for conduit method from DT. > > > psci: PSCIv1.1 detected in firmware. > > > psci: Using standard PSCI v0.2 function IDs > > > psci: Trusted OS migration not required > > > psci: SMC Calling Convention v1.2 > > > percpu: Embedded 21 pages/cpu s48024 r8192 d29800 u86016 > > > Detected PIPT I-cache on CPU0 > > > CPU features: detected: ARM erratum 832075 > > > CPU features: detected: Spectre-v2 > > > CPU features: detected: ARM errata 1165522, 1319367, or 1530923 > > > Built 1 zonelists, mobility grouping on. Total pages: 257536 > > > Kernel command line: root=/dev/vda rw console=ttyAMA0,115200 > > > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) > > > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) > > > mem auto-init: stack:off, heap alloc:off, heap free:off > > > Memory: 1011284K/1046528K available (6592K kernel code, 804K rwdata, 1460K rodata, 1088K init, 321K bss, 35244K reserved, 0K cma-reserved) > > > SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > rcu: Hierarchical RCU implementation. > > > rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. > > > rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. > > > rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 > > > NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > > > GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] > > > random: get_random_bytes called from start_kernel+0x340/0x53c with crng_init=0 > > > arch_timer: cp15 timer(s) running at 62.50MHz (virt). > > > clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns > > > sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns > > > Console: colour dummy device 80x25 > > > Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) > > > pid_max: default: 32768 minimum: 301 > > > Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > > > Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > > > rcu: Hierarchical SRCU implementation. > > > Remapping and enabling EFI services. > > > smp: Bringing up secondary CPUs ... > > > smp: Brought up 1 node, 1 CPU > > > SMP: Total of 1 processors activated. > > > CPU features: detected: 32-bit EL0 Support > > > CPU features: detected: CRC32 instructions > > > CPU: All CPU(s) started at EL1 > > > alternatives: patching kernel code > > > devtmpfs: initialized > > > clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns > > > futex hash table entries: 256 (order: 2, 16384 bytes, linear) > > > SMBIOS 3.0.0 present. > > > DMI: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 > > > NET: Registered protocol family 16 > > > DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations > > > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations > > > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations > > > hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. > > > ASID allocator initialised with 65536 entries > > > Serial: AMBA PL011 UART driver > > > 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 46, base_baud = 0) is a PL011 rev1 > > > printk: console [ttyAMA0] enabled > > > iommu: Default domain type: Translated > > > vgaarb: loaded > > > SCSI subsystem initialized > > > Registered efivars operations > > > clocksource: Switched to clocksource arch_sys_counter > > > NET: Registered protocol family 2 > > > tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) > > > TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) > > > TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) > > > TCP: Hash tables configured (established 8192 bind 8192) > > > UDP hash table entries: 512 (order: 2, 16384 bytes, linear) > > > UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) > > > NET: Registered protocol family 1 > > > PCI: CLS 0 bytes, default 64 > > > hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available > > > workingset: timestamp_bits=62 max_order=18 bucket_order=0 > > > fuse: init (API version 7.33) > > > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > > > io scheduler mq-deadline registered > > > io scheduler kyber registered > > > pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: > > > pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 > > > pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 > > > pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 > > > pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits > > > pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] > > > pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 > > > pci_bus 0000:00: root bus resource [bus 00-ff] > > > pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > > > pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] > > > pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] > > > pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 > > > pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 > > > pci 0000:00:01.0: reg 0x10: [io 0x0080-0x009f] > > > pci 0000:00:01.0: reg 0x14: [mem 0x10001000-0x10001fff] > > > pci 0000:00:01.0: reg 0x20: [mem 0x8000000000-0x8000003fff 64bit pref] > > > pci 0000:00:01.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] > > > pci 0000:00:02.0: [1af4:1001] type 00 class 0x010000 > > > pci 0000:00:02.0: reg 0x10: [io 0x0000-0x007f] > > > pci 0000:00:02.0: reg 0x14: [mem 0x10000000-0x10000fff] > > > pci 0000:00:02.0: reg 0x20: [mem 0x8000004000-0x8000007fff 64bit pref] > > > pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] > > > pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] > > > pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] > > > pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] > > > pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] > > > pci 0000:00:02.0: BAR 0: assigned [io 0x1000-0x107f] > > > pci 0000:00:01.0: BAR 0: assigned [io 0x1080-0x109f] > > > virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) > > > virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) > > > cacheinfo: Unable to detect cache hierarchy for CPU 0 > > > virtio_blk virtio1: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB) > > > SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd > > > NET: Registered protocol family 10 > > > Segment Routing with IPv6 > > > sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > > > NET: Registered protocol family 17 > > > NET: Registered protocol family 15 > > > NET: Registered protocol family 40 > > > registered taskstats version 1 > > > EXT4-fs (vda): recovery complete > > > EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. > > > VFS: Mounted root (ext4 filesystem) on device 254:0. > > > devtmpfs: mounted > > > Freeing unused kernel memory: 1088K > > > Run /sbin/init as init process > > > mount: you must be root > > > mount: you must be root > > > mkdir: can't create directory '/dev/pts': Permission denied > > > mkdir: can't create directory '/dev/shm': Permission denied > > > mount: you must be root > > > hostname: sethostname: Operation not permitted > > > Starting syslogd: OK > > > Starting klogd: OK > > > Running sysctl: OK > > > Initializing random number generator: OK > > > Saving random seed: random: dd: uninitialized urandom read (512 bytes read) > > > OK > > > Starting network: ip: RTNETLINK answers: Operation not permitted > > > ip: SIOCSIFFLAGS: Operation not permitted > > > sed: /proc/mounts: No such file or directory > > > Waiting for interface eth0 to appear............... timeout! > > > run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1 > > > FAIL > > > can't open /dev/ttyAMA0: Permission denied > > > can't open /dev/ttyAMA0: Permission denied > > > can't open /dev/ttyAMA0: Permission denied > > > can't open /dev/ttyAMA0: Permission denied > > > > > > And it continues... > > > > > > The qemu command I got did not work "as it is" and because I'm neither too > > > proficient with qemu nor aarch64, it took a while to get something usable. > > > This is my current qemu command: > > > > > > qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu cortex-a57 \ > > > -kernel ~/Projects/tpm/buildroot/output/images/Image \ > > > -no-acpi \ > > > -append 'root=/dev/vda rw console=ttyAMA0,115200 ' \ > > > -drive file=~/Projects/tpm/buildroot/output/images/rootfs.ext4,format=raw \ > > > -smp 1 \ > > > -monitor telnet:127.0.0.1:55555,server,nowait \ > > > -m 1024 -bios ~/Projects/tpm/fw/aarch64-fw.bin -d unimp > > > > > > Then I start QEMU monitor from another terminal with: > > > > > > socat tcp-connect:127.0.0.1:55555 file:`tty`,raw,echo=0 > > > > > > So... what could be the issue with permissions? > > > > > > > It mostly sounds like an issue with your buildroot filesystem. > > > > Can you try with this [1] init ramdisk instead? > > > > -initrd rootfs.cpio.gz > > > > [1] https://people.linaro.org/~sumit.garg/rootfs.cpio.gz > > > > -Sumit > > That does not include my LKM's. > You can give a try with my kernel image [1] which has required built in kernel modules. Also, you should be able to build a similar kernel image. [1] https://people.linaro.org/~sumit.garg/Image -Sumit > /Jarkko
On Mon, Feb 22, 2021 at 12:45:18PM +0530, Sumit Garg wrote: > On Tue, 16 Feb 2021 at 12:59, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > On Mon, Feb 15, 2021 at 06:37:00PM +0530, Sumit Garg wrote: > > > On Fri, 12 Feb 2021 at 05:04, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > On Mon, Jan 25, 2021 at 02:47:38PM +0530, Sumit Garg wrote: > > > > > Hi Jarkko, > > > > > > > > > > On Fri, 22 Jan 2021 at 23:42, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > > > > > > On Thu, Jan 21, 2021 at 05:23:45PM +0100, Jerome Forissier wrote: > > > > > > > > > > > > > > > > > > > > > On 1/21/21 4:24 PM, Jarkko Sakkinen wrote: > > > > > > > > On Thu, Jan 21, 2021 at 05:07:42PM +0200, Jarkko Sakkinen wrote: > > > > > > > >> On Thu, Jan 21, 2021 at 09:44:07AM +0100, Jerome Forissier wrote: > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> On 1/21/21 1:02 AM, Jarkko Sakkinen via OP-TEE wrote: > > > > > > > >>>> On Wed, Jan 20, 2021 at 12:53:28PM +0530, Sumit Garg wrote: > > > > > > > >>>>> On Wed, 20 Jan 2021 at 07:01, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > >>>>>> > > > > > > > >>>>>> On Tue, Jan 19, 2021 at 12:30:42PM +0200, Jarkko Sakkinen wrote: > > > > > > > >>>>>>> On Fri, Jan 15, 2021 at 11:32:31AM +0530, Sumit Garg wrote: > > > > > > > >>>>>>>> On Thu, 14 Jan 2021 at 07:35, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > >>>>>>>>> > > > > > > > >>>>>>>>> On Wed, Jan 13, 2021 at 04:47:00PM +0530, Sumit Garg wrote: > > > > > > > >>>>>>>>>> Hi Jarkko, > > > > > > > >>>>>>>>>> > > > > > > > >>>>>>>>>> On Mon, 11 Jan 2021 at 22:05, Jarkko Sakkinen <jarkko@kernel.org> wrote: > > > > > > > >>>>>>>>>>> > > > > > > > >>>>>>>>>>> On Tue, Nov 03, 2020 at 09:31:44PM +0530, Sumit Garg wrote: > > > > > > > >>>>>>>>>>>> Add support for TEE based trusted keys where TEE provides the functionality > > > > > > > >>>>>>>>>>>> to seal and unseal trusted keys using hardware unique key. > > > > > > > >>>>>>>>>>>> > > > > > > > >>>>>>>>>>>> Refer to Documentation/tee.txt for detailed information about TEE. > > > > > > > >>>>>>>>>>>> > > > > > > > >>>>>>>>>>>> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> > > > > > > > >>>>>>>>>>> > > > > > > > >>>>>>>>>>> I haven't yet got QEMU environment working with aarch64, this produces > > > > > > > >>>>>>>>>>> just a blank screen: > > > > > > > >>>>>>>>>>> > > > > > > > >>>>>>>>>>> ./output/host/usr/bin/qemu-system-aarch64 -M virt -cpu cortex-a53 -smp 1 -kernel output/images/Image -initrd output/images/rootfs.cpio -serial stdio > > > > > > > >>>>>>>>>>> > > > > > > > >>>>>>>>>>> My BuildRoot fork for TPM and keyring testing is located over here: > > > > > > > >>>>>>>>>>> > > > > > > > >>>>>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/buildroot-tpmdd.git/ > > > > > > > >>>>>>>>>>> > > > > > > > >>>>>>>>>>> The "ARM version" is at this point in aarch64 branch. Over time I will > > > > > > > >>>>>>>>>>> define tpmdd-x86_64 and tpmdd-aarch64 boards and everything will be then > > > > > > > >>>>>>>>>>> in the master branch. > > > > > > > >>>>>>>>>>> > > > > > > > >>>>>>>>>>> To create identical images you just need to > > > > > > > >>>>>>>>>>> > > > > > > > >>>>>>>>>>> $ make tpmdd_defconfig && make > > > > > > > >>>>>>>>>>> > > > > > > > >>>>>>>>>>> Can you check if you see anything obviously wrong? I'm eager to test this > > > > > > > >>>>>>>>>>> patch set, and in bigger picture I really need to have ready to run > > > > > > > >>>>>>>>>>> aarch64 environment available. > > > > > > > >>>>>>>>>> > > > > > > > >>>>>>>>>> I would rather suggest you to follow steps listed here [1] as to test > > > > > > > >>>>>>>>>> this feature on Qemu aarch64 we need to build firmwares such as TF-A, > > > > > > > >>>>>>>>>> OP-TEE, UEFI etc. which are all integrated into OP-TEE Qemu build > > > > > > > >>>>>>>>>> system [2]. And then it would be easier to migrate them to your > > > > > > > >>>>>>>>>> buildroot environment as well. > > > > > > > >>>>>>>>>> > > > > > > > >>>>>>>>>> [1] https://lists.trustedfirmware.org/pipermail/op-tee/2020-May/000027.html > > > > > > > >>>>>>>>>> [2] https://optee.readthedocs.io/en/latest/building/devices/qemu.html#qemu-v8 > > > > > > > >>>>>>>>>> > > > > > > > >>>>>>>>>> -Sumit > > > > > > > >>>>>>>>> > > > > > > > >>>>>>>>> Can you provide 'keyctl_change'? Otherwise, the steps are easy to follow. > > > > > > > >>>>>>>>> > > > > > > > >>>>>>>> > > > > > > > >>>>>>>> $ cat keyctl_change > > > > > > > >>>>>>>> diff --git a/common.mk b/common.mk > > > > > > > >>>>>>>> index aeb7b41..663e528 100644 > > > > > > > >>>>>>>> --- a/common.mk > > > > > > > >>>>>>>> +++ b/common.mk > > > > > > > >>>>>>>> @@ -229,6 +229,7 @@ BR2_PACKAGE_OPTEE_TEST_SDK ?= $(OPTEE_OS_TA_DEV_KIT_DIR) > > > > > > > >>>>>>>> BR2_PACKAGE_OPTEE_TEST_SITE ?= $(OPTEE_TEST_PATH) > > > > > > > >>>>>>>> BR2_PACKAGE_STRACE ?= y > > > > > > > >>>>>>>> BR2_TARGET_GENERIC_GETTY_PORT ?= $(if > > > > > > > >>>>>>>> $(CFG_NW_CONSOLE_UART),ttyAMA$(CFG_NW_CONSOLE_UART),ttyAMA0) > > > > > > > >>>>>>>> +BR2_PACKAGE_KEYUTILS := y > > > > > > > >>>>>>>> > > > > > > > >>>>>>>> # All BR2_* variables from the makefile or the environment are appended to > > > > > > > >>>>>>>> # ../out-br/extra.conf. All values are quoted "..." except y and n. > > > > > > > >>>>>>>> diff --git a/kconfigs/qemu.conf b/kconfigs/qemu.conf > > > > > > > >>>>>>>> index 368c18a..832ab74 100644 > > > > > > > >>>>>>>> --- a/kconfigs/qemu.conf > > > > > > > >>>>>>>> +++ b/kconfigs/qemu.conf > > > > > > > >>>>>>>> @@ -20,3 +20,5 @@ CONFIG_9P_FS=y > > > > > > > >>>>>>>> CONFIG_9P_FS_POSIX_ACL=y > > > > > > > >>>>>>>> CONFIG_HW_RANDOM=y > > > > > > > >>>>>>>> CONFIG_HW_RANDOM_VIRTIO=y > > > > > > > >>>>>>>> +CONFIG_TRUSTED_KEYS=y > > > > > > > >>>>>>>> +CONFIG_ENCRYPTED_KEYS=y > > > > > > > >>>>>>>> > > > > > > > >>>>>>>>> After I've successfully tested 2/4, I'd suggest that you roll out one more > > > > > > > >>>>>>>>> version and CC the documentation patch to Elaine and Mini, and clearly > > > > > > > >>>>>>>>> remark in the commit message that TEE is a standard, with a link to the > > > > > > > >>>>>>>>> specification. > > > > > > > >>>>>>>>> > > > > > > > >>>>>>>> > > > > > > > >>>>>>>> Sure, I will roll out the next version after your testing. > > > > > > > >>>>>>> > > > > > > > >>>>>>> Thanks, I'll try this at instant, and give my feedback. > > > > > > > >>>>>> > > > > > > > >>>>>> I bump into this: > > > > > > > >>>>>> > > > > > > > >>>>>> $ make run-only > > > > > > > >>>>>> ln -sf /home/jarkko/devel/tpm/optee/build/../out-br/images/rootfs.cpio.gz /home/jarkko/devel/tpm/optee/build/../out/bin/ > > > > > > > >>>>>> ln: failed to create symbolic link '/home/jarkko/devel/tpm/optee/build/../out/bin/': No such file or directory > > > > > > > >>>>>> make: *** [Makefile:194: run-only] Error 1 > > > > > > > >>>>>> > > > > > > > >>>>> > > > > > > > >>>>> Could you check if the following directory tree is built after > > > > > > > >>>>> executing the below command? > > > > > > > >>>>> > > > > > > > >>>>> $ make -j`nproc` > > > > > > > >>>>> CFG_IN_TREE_EARLY_TAS=trusted_keys/f04a0fe7-1f5d-4b9b-abf7-619b85b4ce8c > > > > > > > >>>>> > > > > > > > >>>>> $ tree out/bin/ > > > > > > > >>>>> out/bin/ > > > > > > > >>>>> ├── bl1.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl1.bin > > > > > > > >>>>> ├── bl2.bin -> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl2.bin > > > > > > > >>>>> ├── bl31.bin -> > > > > > > > >>>>> /home/sumit/build/optee/build/../trusted-firmware-a/build/qemu/release/bl31.bin > > > > > > > >>>>> ├── bl32.bin -> > > > > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-header_v2.bin > > > > > > > >>>>> ├── bl32_extra1.bin -> > > > > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pager_v2.bin > > > > > > > >>>>> ├── bl32_extra2.bin -> > > > > > > > >>>>> /home/sumit/build/optee/build/../optee_os/out/arm/core/tee-pageable_v2.bin > > > > > > > >>>>> ├── bl33.bin -> > > > > > > > >>>>> /home/sumit/build/optee/build/../edk2/Build/ArmVirtQemuKernel-AARCH64/RELEASE_GCC49/FV/QEMU_EFI.fd > > > > > > > >>>>> ├── Image -> /home/sumit/build/optee/build/../linux/arch/arm64/boot/Image > > > > > > > >>>>> └── rootfs.cpio.gz -> > > > > > > > >>>>> /home/sumit/build/optee/build/../out-br/images/rootfs.cpio.gz > > > > > > > >>>>> > > > > > > > >>>>> 0 directories, 9 files > > > > > > > >>>>> > > > > > > > >>>>> -Sumit > > > > > > > >>>> > > > > > > > >>>> I actually spotted a build error that was unnoticed last time: > > > > > > > >>>> > > > > > > > >>>> make[2]: Entering directory '/home/jarkko/devel/tpm/optee/edk2/BaseTools/Tests' > > > > > > > >>>> /bin/sh: 1: python: not found > > > > > > > >>>> > > > > > > > >>>> I'd prefer not to install Python2. It has been EOL over a year. > > > > > > > >>> > > > > > > > >>> AFAIK, everything should build fine with Python3. On my Ubuntu 20.04 > > > > > > > >>> machine, this is accomplished by installing package "python-is-python3" > > > > > > > >>> (after uninstalling "python-is-python2" if need be). > > > > > > > >>> > > > > > > > >>> $ ls -l /usr/bin/python > > > > > > > >>> lrwxrwxrwx 1 root root 7 Apr 15 2020 /usr/bin/python -> python3 > > > > > > > >> > > > > > > > >> Right, just found about this in unrelated context :-) [*] > > > > > > > >> > > > > > > > >> Hope this will work out... > > > > > > > >> > > > > > > > >> [*] https://github.com/surge-synthesizer/surge/pull/3655 > > > > > > > > > > > > > > > > Now I get > > > > > > > > > > > > > > > > Traceback (most recent call last): > > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 36, in <module> > > > > > > > > allTests = GetAllTestsSuite() > > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 33, in GetAllTestsSuite > > > > > > > > return unittest.TestSuite([GetCTestSuite(), GetPythonTestSuite()]) > > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/RunTests.py", line 25, in GetCTestSuite > > > > > > > > import CToolsTests > > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/CToolsTests.py", line 22, in <module> > > > > > > > > import TianoCompress > > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TianoCompress.py", line 69, in <module> > > > > > > > > TheTestSuite = TestTools.MakeTheTestSuite(locals()) > > > > > > > > File "/home/jarkko/Projects/tpm/optee/edk2/BaseTools/Tests/TestTools.py", line 43, in MakeTheTestSuite > > > > > > > > for name, item in localItems.iteritems(): > > > > > > > > AttributeError: 'dict' object has no attribute 'iteritems' > > > > > > > > > > > > > > Right. Same here after removing all traces of Python2 from my system :-/ > > > > > > > > > > > > > > A couple of fixes are needed: > > > > > > > 1. EDK2 needs to be upgraded to tag or later [1] > > > > > > > 2. The PYTHON3_ENABLE environment variable needs to be set to TRUE [2] > > > > > > > > > > > > > > [1] https://github.com/OP-TEE/manifest/pull/177 > > > > > > > [2] https://github.com/OP-TEE/build/pull/450 > > > > > > > > > > > > BTW, Is to *really* impossible to test this with plain BuildRoot. It's > > > > > > obvious that this forks BR internally. > > > > > > > > > > > > I mean even if I get this working once, this will feels like a clumsy way > > > > > > to test Aarch64 regularly. I use BuildRoot extensively for x86 testing. And > > > > > > it would be nice to be able to start doing regular ARM testing. > > > > > > > > > > The main reason to guide you towards the OP-TEE build system is that > > > > > you will be able to build all the firmwares (TF-A, OP-TEE, edk2 etc.) > > > > > from source. If you don't need to rebuild those then I have prepared a > > > > > flash firmware binary blob for your testing (attached flash.bin). So > > > > > Qemu cmdline will look like: > > > > > > > > > > $ qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu > > > > > cortex-a57 -kernel out/bin/Image -no-acpi -append > > > > > 'console=ttyAMA0,38400 keep_bootcon root=/dev/vda2' -initrd > > > > > out/bin/rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin -d unimp > > > > > > > > I spentt couple of days to try to get this running. > > > > > > > > Here's the log: > > > > > > > > ❯ ./qemu.sh > > > > NOTICE: Booting Trusted Firmware > > > > NOTICE: BL1: v2.3():v2.3 > > > > NOTICE: BL1: Built : 13:28:04, Jan 25 2021 > > > > NOTICE: BL1: Booting BL2 > > > > NOTICE: BL2: v2.3():v2.3 > > > > NOTICE: BL2: Built : 13:28:06, Jan 25 2021 > > > > NOTICE: BL1: Booting BL31 > > > > NOTICE: BL31: v2.3():v2.3 > > > > NOTICE: BL31: Built : 13:28:08, Jan 25 2021 > > > > UEFI firmware (version built at 18:49:27 on Nov 18 2019) > > > > pflash_write: Write to buffer emulation is flawed > > > > pflash_write: Write to buffer emulation is flawed > > > > EFI stub: Booting Linux Kernel... > > > > EFI stub: Using DTB from configuration table > > > > EFI stub: Exiting boot services and installing virtual address map... > > > > Booting Linux on physical CPU 0x0000000000 [0x411fd070] > > > > Linux version 5.11.0-rc5 (jarkko@suppilovahvero) (aarch64-buildroot-linux-uclibc-gcc.br_real (Buildroot 2021.02-rc1-10-ga72c90b972) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP Thu Feb 11 22:04:53 EET 2021 > > > > Machine model: linux,dummy-virt > > > > efi: EFI v2.70 by EDK II > > > > efi: SMBIOS=0x7f520000 SMBIOS 3.0=0x7f500000 MEMATTR=0x7e59b018 MEMRESERVE=0x7c143f18 > > > > Zone ranges: > > > > DMA [mem 0x0000000040000000-0x000000007fffffff] > > > > DMA32 empty > > > > Normal empty > > > > Movable zone start for each node > > > > Early memory node ranges > > > > node 0: [mem 0x0000000040000000-0x0000000041ffffff] > > > > node 0: [mem 0x0000000042200000-0x000000007be3ffff] > > > > node 0: [mem 0x000000007be40000-0x000000007c13ffff] > > > > node 0: [mem 0x000000007c140000-0x000000007f41ffff] > > > > node 0: [mem 0x000000007f420000-0x000000007f4affff] > > > > node 0: [mem 0x000000007f4b0000-0x000000007f4cffff] > > > > node 0: [mem 0x000000007f4d0000-0x000000007f5dffff] > > > > node 0: [mem 0x000000007f5e0000-0x000000007fffffff] > > > > Zeroed struct page in unavailable ranges: 864 pages > > > > Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] > > > > psci: probing for conduit method from DT. > > > > psci: PSCIv1.1 detected in firmware. > > > > psci: Using standard PSCI v0.2 function IDs > > > > psci: Trusted OS migration not required > > > > psci: SMC Calling Convention v1.2 > > > > percpu: Embedded 21 pages/cpu s48024 r8192 d29800 u86016 > > > > Detected PIPT I-cache on CPU0 > > > > CPU features: detected: ARM erratum 832075 > > > > CPU features: detected: Spectre-v2 > > > > CPU features: detected: ARM errata 1165522, 1319367, or 1530923 > > > > Built 1 zonelists, mobility grouping on. Total pages: 257536 > > > > Kernel command line: root=/dev/vda rw console=ttyAMA0,115200 > > > > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) > > > > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) > > > > mem auto-init: stack:off, heap alloc:off, heap free:off > > > > Memory: 1011284K/1046528K available (6592K kernel code, 804K rwdata, 1460K rodata, 1088K init, 321K bss, 35244K reserved, 0K cma-reserved) > > > > SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > > > > rcu: Hierarchical RCU implementation. > > > > rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. > > > > rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. > > > > rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 > > > > NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > > > > GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] > > > > random: get_random_bytes called from start_kernel+0x340/0x53c with crng_init=0 > > > > arch_timer: cp15 timer(s) running at 62.50MHz (virt). > > > > clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns > > > > sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns > > > > Console: colour dummy device 80x25 > > > > Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) > > > > pid_max: default: 32768 minimum: 301 > > > > Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > > > > Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) > > > > rcu: Hierarchical SRCU implementation. > > > > Remapping and enabling EFI services. > > > > smp: Bringing up secondary CPUs ... > > > > smp: Brought up 1 node, 1 CPU > > > > SMP: Total of 1 processors activated. > > > > CPU features: detected: 32-bit EL0 Support > > > > CPU features: detected: CRC32 instructions > > > > CPU: All CPU(s) started at EL1 > > > > alternatives: patching kernel code > > > > devtmpfs: initialized > > > > clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns > > > > futex hash table entries: 256 (order: 2, 16384 bytes, linear) > > > > SMBIOS 3.0.0 present. > > > > DMI: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 > > > > NET: Registered protocol family 16 > > > > DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations > > > > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations > > > > DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations > > > > hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. > > > > ASID allocator initialised with 65536 entries > > > > Serial: AMBA PL011 UART driver > > > > 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 46, base_baud = 0) is a PL011 rev1 > > > > printk: console [ttyAMA0] enabled > > > > iommu: Default domain type: Translated > > > > vgaarb: loaded > > > > SCSI subsystem initialized > > > > Registered efivars operations > > > > clocksource: Switched to clocksource arch_sys_counter > > > > NET: Registered protocol family 2 > > > > tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) > > > > TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) > > > > TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) > > > > TCP: Hash tables configured (established 8192 bind 8192) > > > > UDP hash table entries: 512 (order: 2, 16384 bytes, linear) > > > > UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) > > > > NET: Registered protocol family 1 > > > > PCI: CLS 0 bytes, default 64 > > > > hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available > > > > workingset: timestamp_bits=62 max_order=18 bucket_order=0 > > > > fuse: init (API version 7.33) > > > > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) > > > > io scheduler mq-deadline registered > > > > io scheduler kyber registered > > > > pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: > > > > pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 > > > > pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 > > > > pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 > > > > pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits > > > > pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] > > > > pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 > > > > pci_bus 0000:00: root bus resource [bus 00-ff] > > > > pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > > > > pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] > > > > pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] > > > > pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 > > > > pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 > > > > pci 0000:00:01.0: reg 0x10: [io 0x0080-0x009f] > > > > pci 0000:00:01.0: reg 0x14: [mem 0x10001000-0x10001fff] > > > > pci 0000:00:01.0: reg 0x20: [mem 0x8000000000-0x8000003fff 64bit pref] > > > > pci 0000:00:01.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] > > > > pci 0000:00:02.0: [1af4:1001] type 00 class 0x010000 > > > > pci 0000:00:02.0: reg 0x10: [io 0x0000-0x007f] > > > > pci 0000:00:02.0: reg 0x14: [mem 0x10000000-0x10000fff] > > > > pci 0000:00:02.0: reg 0x20: [mem 0x8000004000-0x8000007fff 64bit pref] > > > > pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] > > > > pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] > > > > pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] > > > > pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] > > > > pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] > > > > pci 0000:00:02.0: BAR 0: assigned [io 0x1000-0x107f] > > > > pci 0000:00:01.0: BAR 0: assigned [io 0x1080-0x109f] > > > > virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) > > > > virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) > > > > cacheinfo: Unable to detect cache hierarchy for CPU 0 > > > > virtio_blk virtio1: [vda] 122880 512-byte logical blocks (62.9 MB/60.0 MiB) > > > > SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd > > > > NET: Registered protocol family 10 > > > > Segment Routing with IPv6 > > > > sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver > > > > NET: Registered protocol family 17 > > > > NET: Registered protocol family 15 > > > > NET: Registered protocol family 40 > > > > registered taskstats version 1 > > > > EXT4-fs (vda): recovery complete > > > > EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. > > > > VFS: Mounted root (ext4 filesystem) on device 254:0. > > > > devtmpfs: mounted > > > > Freeing unused kernel memory: 1088K > > > > Run /sbin/init as init process > > > > mount: you must be root > > > > mount: you must be root > > > > mkdir: can't create directory '/dev/pts': Permission denied > > > > mkdir: can't create directory '/dev/shm': Permission denied > > > > mount: you must be root > > > > hostname: sethostname: Operation not permitted > > > > Starting syslogd: OK > > > > Starting klogd: OK > > > > Running sysctl: OK > > > > Initializing random number generator: OK > > > > Saving random seed: random: dd: uninitialized urandom read (512 bytes read) > > > > OK > > > > Starting network: ip: RTNETLINK answers: Operation not permitted > > > > ip: SIOCSIFFLAGS: Operation not permitted > > > > sed: /proc/mounts: No such file or directory > > > > Waiting for interface eth0 to appear............... timeout! > > > > run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1 > > > > FAIL > > > > can't open /dev/ttyAMA0: Permission denied > > > > can't open /dev/ttyAMA0: Permission denied > > > > can't open /dev/ttyAMA0: Permission denied > > > > can't open /dev/ttyAMA0: Permission denied > > > > > > > > And it continues... > > > > > > > > The qemu command I got did not work "as it is" and because I'm neither too > > > > proficient with qemu nor aarch64, it took a while to get something usable. > > > > This is my current qemu command: > > > > > > > > qemu-system-aarch64 -nographic -s -machine virt,secure=on -cpu cortex-a57 \ > > > > -kernel ~/Projects/tpm/buildroot/output/images/Image \ > > > > -no-acpi \ > > > > -append 'root=/dev/vda rw console=ttyAMA0,115200 ' \ > > > > -drive file=~/Projects/tpm/buildroot/output/images/rootfs.ext4,format=raw \ > > > > -smp 1 \ > > > > -monitor telnet:127.0.0.1:55555,server,nowait \ > > > > -m 1024 -bios ~/Projects/tpm/fw/aarch64-fw.bin -d unimp > > > > > > > > Then I start QEMU monitor from another terminal with: > > > > > > > > socat tcp-connect:127.0.0.1:55555 file:`tty`,raw,echo=0 > > > > > > > > So... what could be the issue with permissions? > > > > > > > > > > It mostly sounds like an issue with your buildroot filesystem. > > > > > > Can you try with this [1] init ramdisk instead? > > > > > > -initrd rootfs.cpio.gz > > > > > > [1] https://people.linaro.org/~sumit.garg/rootfs.cpio.gz > > > > > > -Sumit > > > > That does not include my LKM's. > > > > You can give a try with my kernel image [1] which has required built > in kernel modules. Also, you should be able to build a similar kernel > image. > > [1] https://people.linaro.org/~sumit.garg/Image It comes down to that I need to be able to build my own kernel and user space. I need to be able to build my own kernel. There's been some bugs that I've reported back to BuildRoot with the latest kernel tree and also with binutils [*]. I'll retry once they are fixed, and try to find out what it causing the problem. [*] https://bugs.busybox.net/show_bug.cgi?id=13546 /Jarkko
diff --git a/include/keys/trusted_tee.h b/include/keys/trusted_tee.h new file mode 100644 index 0000000..2e2bb15 --- /dev/null +++ b/include/keys/trusted_tee.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019-2020 Linaro Ltd. + * + * Author: + * Sumit Garg <sumit.garg@linaro.org> + */ + +#ifndef __TEE_TRUSTED_KEY_H +#define __TEE_TRUSTED_KEY_H + +#include <linux/tee_drv.h> + +#define DRIVER_NAME "tee-trusted-key" + +/* + * Get random data for symmetric key + * + * [out] memref[0] Random data + */ +#define TA_CMD_GET_RANDOM 0x0 + +/* + * Seal trusted key using hardware unique key + * + * [in] memref[0] Plain key + * [out] memref[1] Sealed key datablob + */ +#define TA_CMD_SEAL 0x1 + +/* + * Unseal trusted key using hardware unique key + * + * [in] memref[0] Sealed key datablob + * [out] memref[1] Plain key + */ +#define TA_CMD_UNSEAL 0x2 + +/** + * struct trusted_key_private - TEE Trusted key private data + * @dev: TEE based Trusted key device. + * @ctx: TEE context handler. + * @session_id: Trusted key TA session identifier. + * @shm_pool: Memory pool shared with TEE device. + */ +struct trusted_key_private { + struct device *dev; + struct tee_context *ctx; + u32 session_id; + struct tee_shm *shm_pool; +}; + +extern struct trusted_key_ops tee_trusted_key_ops; + +#endif diff --git a/security/keys/trusted-keys/Makefile b/security/keys/trusted-keys/Makefile index 49e3bcf..012dd78 100644 --- a/security/keys/trusted-keys/Makefile +++ b/security/keys/trusted-keys/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_TRUSTED_KEYS) += trusted.o trusted-y += trusted_core.o trusted-y += trusted_tpm1.o trusted-y += trusted_tpm2.o +trusted-y += trusted_tee.o diff --git a/security/keys/trusted-keys/trusted_core.c b/security/keys/trusted-keys/trusted_core.c index aa4f2a0..15b1b0f3 100644 --- a/security/keys/trusted-keys/trusted_core.c +++ b/security/keys/trusted-keys/trusted_core.c @@ -8,6 +8,7 @@ #include <keys/user-type.h> #include <keys/trusted-type.h> +#include <keys/trusted_tee.h> #include <keys/trusted_tpm.h> #include <linux/capability.h> #include <linux/err.h> @@ -29,6 +30,9 @@ static const struct trusted_key_source trusted_key_sources[] = { #if defined(CONFIG_TCG_TPM) { "tpm", &tpm_trusted_key_ops }, #endif +#if defined(CONFIG_TEE) + { "tee", &tee_trusted_key_ops }, +#endif }; DEFINE_STATIC_CALL_NULL(trusted_key_init, *trusted_key_sources[0].ops->init); diff --git a/security/keys/trusted-keys/trusted_tee.c b/security/keys/trusted-keys/trusted_tee.c new file mode 100644 index 0000000..da8785a --- /dev/null +++ b/security/keys/trusted-keys/trusted_tee.c @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2020 Linaro Ltd. + * + * Author: + * Sumit Garg <sumit.garg@linaro.org> + */ + +#include <linux/err.h> +#include <linux/key-type.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/uuid.h> + +#include <keys/trusted-type.h> +#include <keys/trusted_tee.h> + +static struct trusted_key_private pvt_data; + +/* + * Have the TEE seal(encrypt) the symmetric key + */ +static int trusted_tee_seal(struct trusted_key_payload *p, char *datablob) +{ + int ret; + struct tee_ioctl_invoke_arg inv_arg; + struct tee_param param[4]; + struct tee_shm *reg_shm_in = NULL, *reg_shm_out = NULL; + + memset(&inv_arg, 0, sizeof(inv_arg)); + memset(¶m, 0, sizeof(param)); + + reg_shm_in = tee_shm_register(pvt_data.ctx, (unsigned long)p->key, + p->key_len, TEE_SHM_DMA_BUF | + TEE_SHM_KERNEL_MAPPED); + if (IS_ERR(reg_shm_in)) { + dev_err(pvt_data.dev, "key shm register failed\n"); + return PTR_ERR(reg_shm_in); + } + + reg_shm_out = tee_shm_register(pvt_data.ctx, (unsigned long)p->blob, + sizeof(p->blob), TEE_SHM_DMA_BUF | + TEE_SHM_KERNEL_MAPPED); + if (IS_ERR(reg_shm_out)) { + dev_err(pvt_data.dev, "blob shm register failed\n"); + ret = PTR_ERR(reg_shm_out); + goto out; + } + + inv_arg.func = TA_CMD_SEAL; + inv_arg.session = pvt_data.session_id; + inv_arg.num_params = 4; + + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; + param[0].u.memref.shm = reg_shm_in; + param[0].u.memref.size = p->key_len; + param[0].u.memref.shm_offs = 0; + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; + param[1].u.memref.shm = reg_shm_out; + param[1].u.memref.size = sizeof(p->blob); + param[1].u.memref.shm_offs = 0; + + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param); + if ((ret < 0) || (inv_arg.ret != 0)) { + dev_err(pvt_data.dev, "TA_CMD_SEAL invoke err: %x\n", + inv_arg.ret); + ret = -EFAULT; + } else { + p->blob_len = param[1].u.memref.size; + } + +out: + if (reg_shm_out) + tee_shm_free(reg_shm_out); + if (reg_shm_in) + tee_shm_free(reg_shm_in); + + return ret; +} + +/* + * Have the TEE unseal(decrypt) the symmetric key + */ +static int trusted_tee_unseal(struct trusted_key_payload *p, char *datablob) +{ + int ret; + struct tee_ioctl_invoke_arg inv_arg; + struct tee_param param[4]; + struct tee_shm *reg_shm_in = NULL, *reg_shm_out = NULL; + + memset(&inv_arg, 0, sizeof(inv_arg)); + memset(¶m, 0, sizeof(param)); + + reg_shm_in = tee_shm_register(pvt_data.ctx, (unsigned long)p->blob, + p->blob_len, TEE_SHM_DMA_BUF | + TEE_SHM_KERNEL_MAPPED); + if (IS_ERR(reg_shm_in)) { + dev_err(pvt_data.dev, "blob shm register failed\n"); + return PTR_ERR(reg_shm_in); + } + + reg_shm_out = tee_shm_register(pvt_data.ctx, (unsigned long)p->key, + sizeof(p->key), TEE_SHM_DMA_BUF | + TEE_SHM_KERNEL_MAPPED); + if (IS_ERR(reg_shm_out)) { + dev_err(pvt_data.dev, "key shm register failed\n"); + ret = PTR_ERR(reg_shm_out); + goto out; + } + + inv_arg.func = TA_CMD_UNSEAL; + inv_arg.session = pvt_data.session_id; + inv_arg.num_params = 4; + + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT; + param[0].u.memref.shm = reg_shm_in; + param[0].u.memref.size = p->blob_len; + param[0].u.memref.shm_offs = 0; + param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; + param[1].u.memref.shm = reg_shm_out; + param[1].u.memref.size = sizeof(p->key); + param[1].u.memref.shm_offs = 0; + + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param); + if ((ret < 0) || (inv_arg.ret != 0)) { + dev_err(pvt_data.dev, "TA_CMD_UNSEAL invoke err: %x\n", + inv_arg.ret); + ret = -EFAULT; + } else { + p->key_len = param[1].u.memref.size; + } + +out: + if (reg_shm_out) + tee_shm_free(reg_shm_out); + if (reg_shm_in) + tee_shm_free(reg_shm_in); + + return ret; +} + +/* + * Have the TEE generate random symmetric key + */ +static int trusted_tee_get_random(unsigned char *key, size_t key_len) +{ + int ret; + struct tee_ioctl_invoke_arg inv_arg; + struct tee_param param[4]; + struct tee_shm *reg_shm = NULL; + + memset(&inv_arg, 0, sizeof(inv_arg)); + memset(¶m, 0, sizeof(param)); + + reg_shm = tee_shm_register(pvt_data.ctx, (unsigned long)key, key_len, + TEE_SHM_DMA_BUF | TEE_SHM_KERNEL_MAPPED); + if (IS_ERR(reg_shm)) { + dev_err(pvt_data.dev, "key shm register failed\n"); + return PTR_ERR(reg_shm); + } + + inv_arg.func = TA_CMD_GET_RANDOM; + inv_arg.session = pvt_data.session_id; + inv_arg.num_params = 4; + + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT; + param[0].u.memref.shm = reg_shm; + param[0].u.memref.size = key_len; + param[0].u.memref.shm_offs = 0; + + ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param); + if ((ret < 0) || (inv_arg.ret != 0)) { + dev_err(pvt_data.dev, "TA_CMD_GET_RANDOM invoke err: %x\n", + inv_arg.ret); + ret = -EFAULT; + } else { + ret = param[0].u.memref.size; + } + + tee_shm_free(reg_shm); + + return ret; +} + +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data) +{ + if (ver->impl_id == TEE_IMPL_ID_OPTEE) + return 1; + else + return 0; +} + +static int trusted_key_probe(struct device *dev) +{ + struct tee_client_device *rng_device = to_tee_client_device(dev); + int ret; + struct tee_ioctl_open_session_arg sess_arg; + + memset(&sess_arg, 0, sizeof(sess_arg)); + + pvt_data.ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, + NULL); + if (IS_ERR(pvt_data.ctx)) + return -ENODEV; + + memcpy(sess_arg.uuid, rng_device->id.uuid.b, TEE_IOCTL_UUID_LEN); + sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL; + sess_arg.num_params = 0; + + ret = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL); + if ((ret < 0) || (sess_arg.ret != 0)) { + dev_err(dev, "tee_client_open_session failed, err: %x\n", + sess_arg.ret); + ret = -EINVAL; + goto out_ctx; + } + pvt_data.session_id = sess_arg.session; + + ret = register_key_type(&key_type_trusted); + if (ret < 0) + goto out_sess; + + pvt_data.dev = dev; + + return 0; + +out_sess: + tee_client_close_session(pvt_data.ctx, pvt_data.session_id); +out_ctx: + tee_client_close_context(pvt_data.ctx); + + return ret; +} + +static int trusted_key_remove(struct device *dev) +{ + unregister_key_type(&key_type_trusted); + tee_client_close_session(pvt_data.ctx, pvt_data.session_id); + tee_client_close_context(pvt_data.ctx); + + return 0; +} + +static const struct tee_client_device_id trusted_key_id_table[] = { + {UUID_INIT(0xf04a0fe7, 0x1f5d, 0x4b9b, + 0xab, 0xf7, 0x61, 0x9b, 0x85, 0xb4, 0xce, 0x8c)}, + {} +}; +MODULE_DEVICE_TABLE(tee, trusted_key_id_table); + +static struct tee_client_driver trusted_key_driver = { + .id_table = trusted_key_id_table, + .driver = { + .name = DRIVER_NAME, + .bus = &tee_bus_type, + .probe = trusted_key_probe, + .remove = trusted_key_remove, + }, +}; + +static int trusted_tee_init(void) +{ + return driver_register(&trusted_key_driver.driver); +} + +static void trusted_tee_exit(void) +{ + driver_unregister(&trusted_key_driver.driver); +} + +struct trusted_key_ops tee_trusted_key_ops = { + .migratable = 0, /* non-migratable */ + .init = trusted_tee_init, + .seal = trusted_tee_seal, + .unseal = trusted_tee_unseal, + .get_random = trusted_tee_get_random, + .exit = trusted_tee_exit, +};
Add support for TEE based trusted keys where TEE provides the functionality to seal and unseal trusted keys using hardware unique key. Refer to Documentation/tee.txt for detailed information about TEE. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> --- include/keys/trusted_tee.h | 55 ++++++ security/keys/trusted-keys/Makefile | 1 + security/keys/trusted-keys/trusted_core.c | 4 + security/keys/trusted-keys/trusted_tee.c | 278 ++++++++++++++++++++++++++++++ 4 files changed, 338 insertions(+) create mode 100644 include/keys/trusted_tee.h create mode 100644 security/keys/trusted-keys/trusted_tee.c