Message ID | 20210212191104.2365912-1-f.fainelli@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Revert "ARM: dts: bcm2711: Add the BSC interrupt controller" | expand |
On Fri, Feb 12, 2021 at 11:11:04AM -0800, Florian Fainelli wrote: > As Dave reported: > > This seems to have unintended side effects. GIC interrupt 117 is shared > between the standard I2C controllers (i2c-bcm2835) and the l2-intc block > handling the HDMI I2C interrupts. > > There is not a great way to share an interrupt between an interrupt > controller using the chained IRQ handler which is an interrupt flow and > another driver like i2c-bcm2835 which uses an interrupt handler > (although it specifies IRQF_SHARED). > > Simply revert this change for now which will mean that HDMI I2C will be > polled, like it was before. > > Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Thanks! Maxime
On Fri, 2021-02-12 at 11:11 -0800, Florian Fainelli wrote: > As Dave reported: > > This seems to have unintended side effects. GIC interrupt 117 is shared > between the standard I2C controllers (i2c-bcm2835) and the l2-intc block > handling the HDMI I2C interrupts. > > There is not a great way to share an interrupt between an interrupt > controller using the chained IRQ handler which is an interrupt flow and > another driver like i2c-bcm2835 which uses an interrupt handler > (although it specifies IRQF_SHARED). > > Simply revert this change for now which will mean that HDMI I2C will be > polled, like it was before. > > Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Regards, Nicolas
On 2/12/2021 11:11 AM, Florian Fainelli wrote: > As Dave reported: > > This seems to have unintended side effects. GIC interrupt 117 is shared > between the standard I2C controllers (i2c-bcm2835) and the l2-intc block > handling the HDMI I2C interrupts. > > There is not a great way to share an interrupt between an interrupt > controller using the chained IRQ handler which is an interrupt flow and > another driver like i2c-bcm2835 which uses an interrupt handler > (although it specifies IRQF_SHARED). > > Simply revert this change for now which will mean that HDMI I2C will be > polled, like it was before. > > Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Applied to devicetree/next, thanks!
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 462b1dfb0385..720beec54d61 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -308,14 +308,6 @@ dvp: clock@7ef00000 { #reset-cells = <1>; }; - bsc_intr: interrupt-controller@7ef00040 { - compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; - reg = <0x7ef00040 0x30>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - }; - aon_intr: interrupt-controller@7ef00100 { compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; reg = <0x7ef00100 0x30>; @@ -362,8 +354,6 @@ ddc0: i2c@7ef04500 { reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <0>; status = "disabled"; }; @@ -405,8 +395,6 @@ ddc1: i2c@7ef09500 { reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <1>; status = "disabled"; }; };
As Dave reported: This seems to have unintended side effects. GIC interrupt 117 is shared between the standard I2C controllers (i2c-bcm2835) and the l2-intc block handling the HDMI I2C interrupts. There is not a great way to share an interrupt between an interrupt controller using the chained IRQ handler which is an interrupt flow and another driver like i2c-bcm2835 which uses an interrupt handler (although it specifies IRQF_SHARED). Simply revert this change for now which will mean that HDMI I2C will be polled, like it was before. Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- arch/arm/boot/dts/bcm2711.dtsi | 12 ------------ 1 file changed, 12 deletions(-)