| Message ID | 20210217112122.424236-23-robert.foss@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for the SDM845 Camera Subsystem | expand |
Hi Robert, Thank you for your patch! Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Thanks, Andrey On 17.02.2021 14:21, Robert Foss wrote: > Enable camss & ov8856 DT nodes. > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > --- > > Changes since v1 > - Laurent: Fix subject > - Laurent: Remove redundant regulator labels > - Laurent: Remove empty line > > Changes since v3 > - Fixed ordering of IRQs > - Add newlines for better readability > > arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 19 +++++++++++++++++-- > 1 file changed, 17 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > index 5842ab65789c..d89286f6aacb 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > @@ -1108,6 +1108,21 @@ &cci { > > &camss { > vdda-supply = <&vreg_l1a_0p875>; > + > + status = "ok"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + csiphy0_ep: endpoint { > + clock-lanes = <1>; > + data-lanes = <1 2 3 4>; > + remote-endpoint = <&ov8856_ep>; > + }; > + }; > + }; > }; > > &cci_i2c0 { > @@ -1139,7 +1154,7 @@ camera@10 { > avdd-supply = <&cam0_avdd_2v8>; > dvdd-supply = <&cam0_dvdd_1v2>; > > - status = "disable"; > + status = "ok"; > > port { > ov8856_ep: endpoint { > @@ -1147,7 +1162,7 @@ ov8856_ep: endpoint { > link-frequencies = /bits/ 64 > <360000000 180000000>; > data-lanes = <1 2 3 4>; > -// remote-endpoint = <&csiphy0_ep>; > + remote-endpoint = <&csiphy0_ep>; > }; > }; > }; >
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 5842ab65789c..d89286f6aacb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1108,6 +1108,21 @@ &cci { &camss { vdda-supply = <&vreg_l1a_0p875>; + + status = "ok"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csiphy0_ep: endpoint { + clock-lanes = <1>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&ov8856_ep>; + }; + }; + }; }; &cci_i2c0 { @@ -1139,7 +1154,7 @@ camera@10 { avdd-supply = <&cam0_avdd_2v8>; dvdd-supply = <&cam0_dvdd_1v2>; - status = "disable"; + status = "ok"; port { ov8856_ep: endpoint { @@ -1147,7 +1162,7 @@ ov8856_ep: endpoint { link-frequencies = /bits/ 64 <360000000 180000000>; data-lanes = <1 2 3 4>; -// remote-endpoint = <&csiphy0_ep>; + remote-endpoint = <&csiphy0_ep>; }; }; };
Enable camss & ov8856 DT nodes. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- Changes since v1 - Laurent: Fix subject - Laurent: Remove redundant regulator labels - Laurent: Remove empty line Changes since v3 - Fixed ordering of IRQs - Add newlines for better readability arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)