| Message ID | e5940485edfb57906d4b343bf9fd1de408b7103b.1614142928.git.asutoshd@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable power management for ufs wlun | expand |
On 24/02/21 7:13 am, Asutosh Das wrote: > During runtime-suspend of ufs host, the scsi devices are > already suspended and so are the queues associated with them. > But the ufs host sends SSU to wlun during its runtime-suspend. > During the process blk_queue_enter checks if the queue is not in > suspended state. If so, it waits for the queue to resume, and never > comes out of it. > The commit > (d55d15a33: scsi: block: Do not accept any requests while suspended) > adds the check if the queue is in suspended state in blk_queue_enter(). > > Call trace: > __switch_to+0x174/0x2c4 > __schedule+0x478/0x764 > schedule+0x9c/0xe0 > blk_queue_enter+0x158/0x228 > blk_mq_alloc_request+0x40/0xa4 > blk_get_request+0x2c/0x70 > __scsi_execute+0x60/0x1c4 > ufshcd_set_dev_pwr_mode+0x124/0x1e4 > ufshcd_suspend+0x208/0x83c > ufshcd_runtime_suspend+0x40/0x154 > ufshcd_pltfrm_runtime_suspend+0x14/0x20 > pm_generic_runtime_suspend+0x28/0x3c > __rpm_callback+0x80/0x2a4 > rpm_suspend+0x308/0x614 > rpm_idle+0x158/0x228 > pm_runtime_work+0x84/0xac > process_one_work+0x1f0/0x470 > worker_thread+0x26c/0x4c8 > kthread+0x13c/0x320 > ret_from_fork+0x10/0x18 > > Fix this by registering ufs device wlun as a scsi driver and > registering it for block runtime-pm. Also make this as a > supplier for all other luns. That way, this device wlun > suspends after all the consumers and resumes after > hba resumes. > > Co-developed-by: Can Guo <cang@codeaurora.org> > Signed-off-by: Can Guo <cang@codeaurora.org> > Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> > --- > drivers/scsi/ufs/ufs-qcom.c | 2 + > drivers/scsi/ufs/ufshcd-pci.c | 24 -- > drivers/scsi/ufs/ufshcd-pltfrm.c | 29 +++ > drivers/scsi/ufs/ufshcd-pltfrm.h | 4 + > drivers/scsi/ufs/ufshcd.c | 491 +++++++++++++++++++++++++++++++-------- > drivers/scsi/ufs/ufshcd.h | 5 + > include/trace/events/ufs.h | 20 ++ > 7 files changed, 454 insertions(+), 121 deletions(-) > > diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c > index f97d7b0..8cd8cfd 100644 > --- a/drivers/scsi/ufs/ufs-qcom.c > +++ b/drivers/scsi/ufs/ufs-qcom.c > @@ -1546,6 +1546,8 @@ static const struct dev_pm_ops ufs_qcom_pm_ops = { > .runtime_suspend = ufshcd_pltfrm_runtime_suspend, > .runtime_resume = ufshcd_pltfrm_runtime_resume, > .runtime_idle = ufshcd_pltfrm_runtime_idle, > + .prepare = ufshcd_pltfrm_prepare, > + .resume_early = ufshcd_pltfrm_resume_early, The pair for the "prepare" callback is the "complete" callback rather than "resume_early" Presumably all drivers will need this kind of change. > }; > > static struct platform_driver ufs_qcom_pltform = { > diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c > index fadd566..ab84d56 100644 > --- a/drivers/scsi/ufs/ufshcd-pci.c > +++ b/drivers/scsi/ufs/ufshcd-pci.c > @@ -247,29 +247,6 @@ static int ufshcd_pci_resume(struct device *dev) > return ufshcd_system_resume(dev_get_drvdata(dev)); > } > > -/** > - * ufshcd_pci_poweroff - suspend-to-disk poweroff function > - * @dev: pointer to PCI device handle > - * > - * Returns 0 if successful > - * Returns non-zero otherwise > - */ > -static int ufshcd_pci_poweroff(struct device *dev) > -{ > - struct ufs_hba *hba = dev_get_drvdata(dev); > - int spm_lvl = hba->spm_lvl; > - int ret; > - > - /* > - * For poweroff we need to set the UFS device to PowerDown mode. > - * Force spm_lvl to ensure that. > - */ > - hba->spm_lvl = 5; > - ret = ufshcd_system_suspend(hba); > - hba->spm_lvl = spm_lvl; > - return ret; > -} > - > #endif /* !CONFIG_PM_SLEEP */ > > #ifdef CONFIG_PM > @@ -370,7 +347,6 @@ static const struct dev_pm_ops ufshcd_pci_pm_ops = { > .resume = ufshcd_pci_resume, > .freeze = ufshcd_pci_suspend, > .thaw = ufshcd_pci_resume, > - .poweroff = ufshcd_pci_poweroff, > .restore = ufshcd_pci_resume, > #endif > SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend, > diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c > index 1a69949..84550dc 100644 > --- a/drivers/scsi/ufs/ufshcd-pltfrm.c > +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c > @@ -217,6 +217,35 @@ int ufshcd_pltfrm_runtime_idle(struct device *dev) > } > EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle); > > +int ufshcd_pltfrm_prepare(struct device *dev) > +{ > + struct ufs_hba *hba = dev_get_drvdata(dev); > + > + /* > + * SCSI assumes that runtime-pm and system-pm for scsi drivers > + * are same. And it doesn't wake up the device for system-suspend > + * if it's runtime suspended. But ufs doesn't follow that. > + * The rpm-lvl and spm-lvl can be different in ufs. > + * Force it to honor system-suspend. Presumably we could check whether the current power mode is different from the spm_lvl target power mode, and only do this in that case? > + */ > + scsi_autopm_get_device(hba->sdev_ufs_device); > + /* Refer ufshcd_pltfrm_resume_early() */ > + pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev); > + scsi_autopm_put_device(hba->sdev_ufs_device); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_prepare); The PCI driver will need this also, so we need a bus-agnostic version exported from ufshcd.c that all drivers can use, like ufshcd_suspend() etc. > + > +int ufshcd_pltfrm_resume_early(struct device *dev) > +{ > + struct ufs_hba *hba = dev_get_drvdata(dev); > + > + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume_early); Ditto > #endif /* CONFIG_PM */ > > void ufshcd_pltfrm_shutdown(struct platform_device *pdev) > diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h > index 772a8e8..caf2709 100644 > --- a/drivers/scsi/ufs/ufshcd-pltfrm.h > +++ b/drivers/scsi/ufs/ufshcd-pltfrm.h > @@ -40,6 +40,8 @@ int ufshcd_pltfrm_resume(struct device *dev); > int ufshcd_pltfrm_runtime_suspend(struct device *dev); > int ufshcd_pltfrm_runtime_resume(struct device *dev); > int ufshcd_pltfrm_runtime_idle(struct device *dev); > +int ufshcd_pltfrm_prepare(struct device *dev); > +int ufshcd_pltfrm_resume_early(struct device *dev); > > #else /* !CONFIG_PM */ > > @@ -48,6 +50,8 @@ int ufshcd_pltfrm_runtime_idle(struct device *dev); > #define ufshcd_pltfrm_runtime_suspend NULL > #define ufshcd_pltfrm_runtime_resume NULL > #define ufshcd_pltfrm_runtime_idle NULL > +#define ufshcd_pltfrm_prepare NULL > +#define ufshcd_pltfrm_resume_early NULL > > #endif /* CONFIG_PM */ > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 45624c7..bc96544 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -16,6 +16,7 @@ > #include <linux/bitfield.h> > #include <linux/blk-pm.h> > #include <linux/blkdev.h> > +#include <scsi/scsi_driver.h> > #include "ufshcd.h" > #include "ufs_quirks.h" > #include "unipro.h" > @@ -78,6 +79,8 @@ > /* Polling time to wait for fDeviceInit */ > #define FDEVICEINIT_COMPL_TIMEOUT 1500 /* millisecs */ > > +#define wlun_dev_to_hba(dv) shost_priv(to_scsi_device(dv)->host) > + > #define ufshcd_toggle_vreg(_dev, _vreg, _on) \ > ({ \ > int _ret; \ > @@ -251,6 +254,12 @@ static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set); > static inline int ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable); > static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba); > static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba); > +static int ufshcd_wl_runtime_suspend(struct device *dev); > +static int ufshcd_wl_runtime_resume(struct device *dev); > +static int ufshcd_wl_suspend(struct device *dev); > +static int ufshcd_wl_resume(struct device *dev); > +static void ufshcd_wl_shutdown(struct device *dev); > +static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun); > > static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag) > { > @@ -1556,7 +1565,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev, > if (value == hba->clk_scaling.is_enabled) > goto out; > > - pm_runtime_get_sync(hba->dev); > + scsi_autopm_get_device(hba->sdev_ufs_device); > ufshcd_hold(hba, false); > > hba->clk_scaling.is_enabled = value; > @@ -1572,7 +1581,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev, > } > > ufshcd_release(hba); > - pm_runtime_put_sync(hba->dev); > + scsi_autopm_put_device(hba->sdev_ufs_device); > out: > up(&hba->host_sem); > return err ? err : count; > @@ -2572,6 +2581,17 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id) > return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE; > } > > +static inline bool is_rpmb_wlun(struct scsi_device *sdev) > +{ > + return (sdev->lun == ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN)); > +} > + > +static inline bool is_device_wlun(struct scsi_device *sdev) > +{ > + return (sdev->lun == > + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN)); > +} > + > static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i) > { > struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr; > @@ -4808,6 +4828,41 @@ static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba, > } > > /** > + * ufshcd_setup_links - associate link b/w device wlun and other luns > + * @sdev: pointer to SCSI device > + * @hba: pointer to ufs hba > + */ > +static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev) > +{ > + struct device_link *link; > + > + /* > + * device wlun is the supplier & rest of the luns are consumers > + * This ensures that device wlun suspends after all other luns. > + */ > + if (hba->sdev_ufs_device) { > + link = device_link_add(&sdev->sdev_gendev, > + &hba->sdev_ufs_device->sdev_gendev, > + DL_FLAG_PM_RUNTIME); > + if (!link) { > + dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n", > + dev_name(&hba->sdev_ufs_device->sdev_gendev)); > + return; > + } > + hba->luns_avail--; > + /* Ignore REPORT_LUN wlun probing */ > + if (hba->luns_avail != 1) > + return; > + > + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev); > + pm_runtime_mark_last_busy(&hba->sdev_ufs_device->sdev_gendev); > + } else { > + /* device wlun is probed */ > + hba->luns_avail--; > + } > +} > + > +/** > * ufshcd_slave_alloc - handle initial SCSI device configurations > * @sdev: pointer to SCSI device > * > @@ -4838,6 +4893,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev) > > ufshcd_get_lu_power_on_wp_status(hba, sdev); > > + ufshcd_setup_links(hba, sdev); > + > return 0; > } > > @@ -4984,16 +5041,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) > * solution could be to abort the system suspend if > * UFS device needs urgent BKOPs. > */ > - if (!hba->pm_op_in_progress && > - ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) && > - schedule_work(&hba->eeh_work)) { > - /* > - * Prevent suspend once eeh_work is scheduled > - * to avoid deadlock between ufshcd_suspend > - * and exception event handler. > - */ > - pm_runtime_get_noresume(hba->dev); > - } > + if (ufshcd_is_exception_event(lrbp->ucd_rsp_ptr)) > + /* Flushed in suspend */ > + schedule_work(&hba->eeh_work); > break; > case UPIU_TRANSACTION_REJECT_UPIU: > /* TODO: handle Reject UPIU Response */ > @@ -5589,8 +5639,8 @@ static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work) > * after a certain delay to recheck the threshold by next runtime > * suspend. > */ > - pm_runtime_get_sync(hba->dev); > - pm_runtime_put_sync(hba->dev); > + scsi_autopm_get_device(hba->sdev_ufs_device); > + scsi_autopm_put_device(hba->sdev_ufs_device); > } > > /** > @@ -5607,7 +5657,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work) > u32 status = 0; > hba = container_of(work, struct ufs_hba, eeh_work); > > - pm_runtime_get_sync(hba->dev); > ufshcd_scsi_block_requests(hba); > err = ufshcd_get_ee_status(hba, &status); > if (err) { > @@ -5623,14 +5672,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work) > > out: > ufshcd_scsi_unblock_requests(hba); > - /* > - * pm_runtime_get_noresume is called while scheduling > - * eeh_work to avoid suspend racing with exception work. > - * Hence decrement usage counter using pm_runtime_put_noidle > - * to allow suspend on completion of exception event handler. > - */ > - pm_runtime_put_noidle(hba->dev); > - pm_runtime_put(hba->dev); > return; > } > > @@ -7254,6 +7295,15 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba) > goto out; > } > ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device); > + /* > + * A pm_runtime_put_sync is invoked when this device enables blk_pm_runtime > + * & would suspend the device-wlun upon timer expiry. > + * But suspending device wlun _may_ put the ufs device in the pre-defined > + * low power mode (SSU <rpm_lvl>). Probing of other luns may fail then. > + * Don't allow this suspend until all the luns have been probed. > + * See pm_runtime_mark_last_busy in ufshcd_setup_links. > + */ > + pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev); > scsi_device_put(hba->sdev_ufs_device); > > hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0, > @@ -7417,6 +7467,9 @@ static int ufs_get_device_desc(struct ufs_hba *hba) > goto out; > } > > + hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] + > + desc_buf[DEVICE_DESC_PARAM_NUM_WLU]; > + > ufs_fixup_device_setup(hba); > > ufshcd_wb_probe(hba, desc_buf); > @@ -7747,6 +7800,95 @@ static int ufshcd_device_params_init(struct ufs_hba *hba) > return ret; > } > > +static int ufshcd_wl_probe(struct device *dev) > +{ > + return is_device_wlun(to_scsi_device(dev)) ? 0 : -ENODEV; > +} > + > +static int ufshcd_wl_remove(struct device *dev) > +{ > + return 0; > +} > + > +static const struct dev_pm_ops ufshcd_wl_pm_ops = { > + SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL) > + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_wl_suspend, ufshcd_wl_resume) Here SET_SYSTEM_SLEEP_PM_OPS sets .poweroff to ufshcd_wl_suspend() which is only correct if spm_lvl is 5. We need it to do what ufshcd_wl_shutdown() does, although the PM functions return 'int' whereas ->shutdown() returns 'void', so it cannot use the same prototype i.e. static int ufshcd_wl_poweroff(struct device *dev) { ufshcd_wl_shutdown(dev); return 0; } Then, .suspend = ufshcd_wl_suspend, .resume = ufshcd_wl_resume, .freeze = ufshcd_wl_suspend, .thaw = ufshcd_wl_resume, .poweroff = ufshcd_wl_poweroff, .restore = ufshcd_wl_resume, > +}; > + > +/** > + * ufs_dev_wlun_template - describes ufs device wlun > + * ufs-device wlun - used to send pm commands > + * All luns are consumers of ufs-device wlun. > + * > + * Currently, no sd driver is present for wluns. > + * Hence the no specific pm operations are performed. > + * With ufs design, SSU should be sent to ufs-device wlun. > + * Hence register a scsi driver for ufs wluns only. > + */ > +static struct scsi_driver ufs_dev_wlun_template = { > + .gendrv = { > + .name = "ufs_device_wlun", > + .owner = THIS_MODULE, > + .probe = ufshcd_wl_probe, > + .remove = ufshcd_wl_remove, > + .pm = &ufshcd_wl_pm_ops, > + .shutdown = ufshcd_wl_shutdown, > + }, > +}; > + > +static int ufshcd_rpmb_probe(struct device *dev) > +{ > + return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV; > +} > + > +static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba) > +{ > + int ret = 0; > + > + if (!hba->wlun_rpmb_clr_ua) > + return 0; > + ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN); > + if (!ret) > + hba->wlun_rpmb_clr_ua = 0; > + return ret; > +} > + > +static int ufshcd_rpmb_runtime_resume(struct device *dev) > +{ > + struct ufs_hba *hba = wlun_dev_to_hba(dev); > + > + if (hba->sdev_rpmb) > + return ufshcd_clear_rpmb_uac(hba); > + return 0; > +} > + > +static int ufshcd_rpmb_resume(struct device *dev) > +{ > + struct ufs_hba *hba = wlun_dev_to_hba(dev); > + > + if (hba->sdev_rpmb && !pm_runtime_suspended(dev)) > + return ufshcd_clear_rpmb_uac(hba); > + return 0; > +} > + > +static const struct dev_pm_ops ufs_rpmb_pm_ops = { > + SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_runtime_resume, NULL) > + SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume) > +}; > + > +/** > + * Describes the ufs rpmb wlun. > + * Used only to send uac. > + */ > +static struct scsi_driver ufs_rpmb_wlun_template = { > + .gendrv = { > + .name = "ufs_rpmb_wlun", > + .owner = THIS_MODULE, > + .probe = ufshcd_rpmb_probe, > + .pm = &ufs_rpmb_pm_ops, > + }, > +}; > + > /** > * ufshcd_add_lus - probe and add UFS logical units > * @hba: per-adapter instance > @@ -7755,6 +7897,19 @@ static int ufshcd_add_lus(struct ufs_hba *hba) > { > int ret; > > + ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv); > + if (ret) { > + dev_err(hba->dev, "Register device wlun driver failed: %d\n", > + ret); > + return ret; > + } This is assuming there is only one UFS host controller, which is probably true but not something that we should assume. Moving this to ufshcd_core_init() might also avoid some more of the forward declarations. > + > + ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv); > + if (ret) { > + dev_err(hba->dev, "Register device wlun driver failed: %d\n", > + ret); > + return ret; > + } > /* Add required well known logical units to scsi mid layer */ > ret = ufshcd_scsi_add_wlus(hba); > if (ret) > @@ -7892,6 +8047,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async) > ufshcd_set_ufs_dev_active(hba); > ufshcd_force_reset_auto_bkops(hba); > hba->wlun_dev_clr_ua = true; > + hba->wlun_rpmb_clr_ua = true; > > /* Gear up to HS gear if supported */ > if (hba->max_pwr_info.is_valid) { > @@ -7964,6 +8120,7 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie) > pm_runtime_put_sync(hba->dev); > ufshcd_hba_exit(hba); > } > + hba->init_done = true; > } > > static const struct attribute_group *ufshcd_driver_groups[] = { > @@ -8475,7 +8632,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, > * handling context. > */ > hba->host->eh_noresume = 1; > - ufshcd_clear_ua_wluns(hba); > + if (hba->wlun_dev_clr_ua) > + ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN); > > cmd[4] = pwr_mode << 4; > > @@ -8650,31 +8808,19 @@ static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba) > ufshcd_setup_hba_vreg(hba, true); > } > > -/** > - * ufshcd_suspend - helper function for suspend operations > - * @hba: per adapter instance > - * @pm_op: desired low power operation type > - * > - * This function will try to put the UFS device and link into low power > - * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl" > - * (System PM level). > - * > - * If this function is called during shutdown, it will make sure that > - * both UFS device and UFS link is powered off. > - * > - * NOTE: UFS device & link must be active before we enter in this function. > - * > - * Returns 0 for success and non-zero for failure > - */ > -static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > +static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > { > int ret = 0; > - int check_for_bkops; > enum ufs_pm_level pm_lvl; > enum ufs_dev_pwr_mode req_dev_pwr_mode; > enum uic_link_state req_link_state; > > - hba->pm_op_in_progress = 1; > + /* > + * Is invoked when the device wlun is added to sysfs > + * But by then hba->sdev_ufs_device may not be initialized. > + */ > + if (!hba->init_done) > + return 0; > if (!ufshcd_is_shutdown_pm(pm_op)) { > pm_lvl = ufshcd_is_runtime_pm(pm_op) ? > hba->rpm_lvl : hba->spm_lvl; > @@ -8690,24 +8836,23 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > * just gate the clocks. > */ > ufshcd_hold(hba, false); > - hba->clk_gating.is_suspended = true; > > if (ufshcd_is_clkscaling_supported(hba)) > ufshcd_clk_scaling_suspend(hba, true); > > if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE && > req_link_state == UIC_LINK_ACTIVE_STATE) { > - goto disable_clks; > + goto enable_scaling; > } > > if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) && > (req_link_state == hba->uic_link_state)) > - goto enable_gating; > + goto enable_scaling; > > /* UFS device & link must be active before we enter in this function */ > if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) { > ret = -EINVAL; > - goto enable_gating; > + goto enable_scaling; > } > > if (ufshcd_is_runtime_pm(pm_op)) { > @@ -8719,7 +8864,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > */ > ret = ufshcd_urgent_bkops(hba); > if (ret) > - goto enable_gating; > + goto enable_scaling; > } else { > /* make sure that auto bkops is disabled */ > ufshcd_disable_auto_bkops(hba); > @@ -8746,10 +8891,206 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > > if (!hba->dev_info.b_rpm_dev_flush_capable) { > ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode); > - if (ret) > - goto enable_gating; > + if (!ret) > + goto out; > } > } > +enable_scaling: > + if (ufshcd_is_clkscaling_supported(hba)) > + ufshcd_clk_scaling_suspend(hba, false); > + > + hba->dev_info.b_rpm_dev_flush_capable = false; > +out: > + if (hba->dev_info.b_rpm_dev_flush_capable) { > + schedule_delayed_work(&hba->rpm_dev_flush_recheck_work, > + msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS)); > + } > + if (ret) > + ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret); > + ufshcd_release(hba); > + return ret; > +} > + > +static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) > +{ > + int ret = 0; > + > + if (!hba->init_done) > + return 0; > + > + ufshcd_hold(hba, false); > + if (ufshcd_is_ufs_dev_deepsleep(hba)) { > + /* The device is in DeepSleep but hba was not suspended */ > + ret = ufshcd_reset_and_restore(hba); > + if (ret) > + goto out; > + } > + > + if (!ufshcd_is_ufs_dev_active(hba)) { > + ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); > + if (ret) > + goto out; > + } > + > + if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) > + ufshcd_enable_auto_bkops(hba); > + else > + /* > + * If BKOPs operations are urgently needed at this moment then > + * keep auto-bkops enabled or else disable it. > + */ > + ufshcd_urgent_bkops(hba); > + > + if (hba->clk_scaling.is_allowed) > + ufshcd_resume_clkscaling(hba); > + > + if (hba->dev_info.b_rpm_dev_flush_capable) { > + hba->dev_info.b_rpm_dev_flush_capable = false; > + cancel_delayed_work(&hba->rpm_dev_flush_recheck_work); > + } > + > +out: > + if (ret) > + ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret); > + ufshcd_release(hba); > + return ret; > +} > + > +static int ufshcd_wl_runtime_suspend(struct device *dev) > +{ > + struct scsi_device *sdev = to_scsi_device(dev); > + struct ufs_hba *hba; > + int ret; > + ktime_t start = ktime_get(); > + > + hba = shost_priv(sdev->host); > + > + ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM); > + if (ret) > + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); > + > + trace_ufshcd_wl_runtime_suspend(dev_name(dev), ret, > + ktime_to_us(ktime_sub(ktime_get(), start)), > + hba->curr_dev_pwr_mode, hba->uic_link_state); > + > + return ret; > +} > + > +static int ufshcd_wl_runtime_resume(struct device *dev) > +{ > + struct scsi_device *sdev = to_scsi_device(dev); > + struct ufs_hba *hba; > + int ret = 0; > + ktime_t start = ktime_get(); > + > + hba = shost_priv(sdev->host); > + > + ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM); > + if (ret) > + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); > + > + trace_ufshcd_wl_runtime_resume(dev_name(dev), ret, > + ktime_to_us(ktime_sub(ktime_get(), start)), > + hba->curr_dev_pwr_mode, hba->uic_link_state); > + > + return ret; > +} > + > +static int ufshcd_wl_suspend(struct device *dev) > +{ > + struct scsi_device *sdev = to_scsi_device(dev); > + struct ufs_hba *hba; > + int ret; > + ktime_t start = ktime_get(); > + > + hba = shost_priv(sdev->host); > + ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM); > + if (ret) > + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); > + > + trace_ufshcd_wl_suspend(dev_name(dev), ret, > + ktime_to_us(ktime_sub(ktime_get(), start)), > + hba->curr_dev_pwr_mode, hba->uic_link_state); > + > + return ret; > +} > + > +static int ufshcd_wl_resume(struct device *dev) > +{ > + struct scsi_device *sdev = to_scsi_device(dev); > + struct ufs_hba *hba; > + int ret = 0; > + ktime_t start = ktime_get(); > + > + if (pm_runtime_suspended(dev)) > + return 0; > + hba = shost_priv(sdev->host); > + > + ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM); > + if (ret) > + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); > + > + trace_ufshcd_wl_resume(dev_name(dev), ret, > + ktime_to_us(ktime_sub(ktime_get(), start)), > + hba->curr_dev_pwr_mode, hba->uic_link_state); > + > + return ret; > +} > + > +static void ufshcd_wl_shutdown(struct device *dev) > +{ > + struct scsi_device *sdev = to_scsi_device(dev); > + struct ufs_hba *hba; > + > + hba = shost_priv(sdev->host); > + scsi_device_quiesce(sdev); > + shost_for_each_device(sdev, hba->host) { > + if (sdev == hba->sdev_ufs_device) > + continue; > + scsi_device_quiesce(sdev); > + } > + __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM); > +} > + > +/** > + * ufshcd_suspend - helper function for suspend operations > + * @hba: per adapter instance > + * @pm_op: desired low power operation type > + * > + * This function will try to put the UFS link into low power > + * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl" > + * (System PM level). > + * > + * If this function is called during shutdown, it will make sure that > + * link is powered off. > + * > + * Returns 0 for success and non-zero for failure > + */ > +static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > +{ > + int ret = 0; > + int check_for_bkops; > + enum ufs_pm_level pm_lvl; > + enum ufs_dev_pwr_mode req_dev_pwr_mode; > + enum uic_link_state req_link_state; > + > + hba->pm_op_in_progress = 1; > + if (!ufshcd_is_shutdown_pm(pm_op)) { > + pm_lvl = ufshcd_is_runtime_pm(pm_op) ? > + hba->rpm_lvl : hba->spm_lvl; > + req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl); > + req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl); > + } else { > + req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE; > + req_link_state = UIC_LINK_OFF_STATE; > + } > + > + /* > + * If we can't transition into any of the low power modes > + * just gate the clocks. > + */ > + ufshcd_hold(hba, false); > + hba->clk_gating.is_suspended = true; > > /* > * In the case of DeepSleep, the device is expected to remain powered > @@ -8758,9 +9099,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba); > ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops); > if (ret) > - goto set_dev_active; > + goto enable_gating; > > -disable_clks: > /* > * Call vendor specific suspend callback. As these callbacks may access > * vendor specific host controller register space call them before the > @@ -8790,7 +9130,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > goto out; > > set_link_active: > - ufshcd_vreg_set_hpm(hba); > /* > * Device hardware reset is required to exit DeepSleep. Also, for > * DeepSleep, the link is off so host reset and restore will be done > @@ -8804,28 +9143,15 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > ufshcd_set_link_active(hba); > else if (ufshcd_is_link_off(hba)) > ufshcd_host_reset_and_restore(hba); > -set_dev_active: > /* Can also get here needing to exit DeepSleep */ > if (ufshcd_is_ufs_dev_deepsleep(hba)) { > ufshcd_device_reset(hba); > ufshcd_host_reset_and_restore(hba); > } > - if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE)) > - ufshcd_disable_auto_bkops(hba); > enable_gating: > - if (ufshcd_is_clkscaling_supported(hba)) > - ufshcd_clk_scaling_suspend(hba, false); > - > hba->clk_gating.is_suspended = false; > - hba->dev_info.b_rpm_dev_flush_capable = false; > - ufshcd_clear_ua_wluns(hba); > ufshcd_release(hba); > out: > - if (hba->dev_info.b_rpm_dev_flush_capable) { > - schedule_delayed_work(&hba->rpm_dev_flush_recheck_work, > - msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS)); > - } > - > hba->pm_op_in_progress = 0; > > if (ret) > @@ -8846,10 +9172,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) > static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) > { > int ret; > - enum uic_link_state old_link_state; > > hba->pm_op_in_progress = 1; > - old_link_state = hba->uic_link_state; > > ufshcd_hba_vreg_set_hpm(hba); > ret = ufshcd_vreg_set_hpm(hba); > @@ -8901,43 +9225,14 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) > goto vendor_suspend; > } > > - if (!ufshcd_is_ufs_dev_active(hba)) { > - ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); > - if (ret) > - goto set_old_link_state; > - } > - > - if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) > - ufshcd_enable_auto_bkops(hba); > - else > - /* > - * If BKOPs operations are urgently needed at this moment then > - * keep auto-bkops enabled or else disable it. > - */ > - ufshcd_urgent_bkops(hba); > - > - hba->clk_gating.is_suspended = false; > - > - if (ufshcd_is_clkscaling_supported(hba)) > - ufshcd_clk_scaling_suspend(hba, false); > - > /* Enable Auto-Hibernate if configured */ > ufshcd_auto_hibern8_enable(hba); > > - if (hba->dev_info.b_rpm_dev_flush_capable) { > - hba->dev_info.b_rpm_dev_flush_capable = false; > - cancel_delayed_work(&hba->rpm_dev_flush_recheck_work); > - } > - > - ufshcd_clear_ua_wluns(hba); > - > /* Schedule clock gating in case of no access to UFS device yet */ > ufshcd_release(hba); > > goto out; > > -set_old_link_state: > - ufshcd_link_state_transition(hba, old_link_state, 0); > vendor_suspend: > ufshcd_vops_suspend(hba, pm_op); > disable_irq_and_vops_clks: > @@ -9170,6 +9465,8 @@ EXPORT_SYMBOL(ufshcd_shutdown); > void ufshcd_remove(struct ufs_hba *hba) > { > ufs_bsg_remove(hba); > + scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); > + scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv); > ufs_sysfs_remove_nodes(hba->dev); > blk_cleanup_queue(hba->tmf_queue); > blk_mq_free_tag_set(&hba->tmf_tag_set); > diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h > index ee61f82..9087593 100644 > --- a/drivers/scsi/ufs/ufshcd.h > +++ b/drivers/scsi/ufs/ufshcd.h > @@ -72,6 +72,8 @@ enum ufs_event_type { > UFS_EVT_LINK_STARTUP_FAIL, > UFS_EVT_RESUME_ERR, > UFS_EVT_SUSPEND_ERR, > + UFS_EVT_WL_SUSP_ERR, > + UFS_EVT_WL_RES_ERR, > > /* abnormal events */ > UFS_EVT_DEV_RESET, > @@ -804,6 +806,7 @@ struct ufs_hba { > struct list_head clk_list_head; > > bool wlun_dev_clr_ua; > + bool wlun_rpmb_clr_ua; > > /* Number of requests aborts */ > int req_abort_count; > @@ -841,6 +844,8 @@ struct ufs_hba { > #ifdef CONFIG_DEBUG_FS > struct dentry *debugfs_root; > #endif > + bool init_done; > + u32 luns_avail; > }; > > /* Returns true if clocks can be gated. Otherwise false */ > diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h > index e151477..d9d233b 100644 > --- a/include/trace/events/ufs.h > +++ b/include/trace/events/ufs.h > @@ -246,6 +246,26 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init, > int dev_state, int link_state), > TP_ARGS(dev_name, err, usecs, dev_state, link_state)); > > +DEFINE_EVENT(ufshcd_template, ufshcd_wl_suspend, > + TP_PROTO(const char *dev_name, int err, s64 usecs, > + int dev_state, int link_state), > + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); > + > +DEFINE_EVENT(ufshcd_template, ufshcd_wl_resume, > + TP_PROTO(const char *dev_name, int err, s64 usecs, > + int dev_state, int link_state), > + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); > + > +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_suspend, > + TP_PROTO(const char *dev_name, int err, s64 usecs, > + int dev_state, int link_state), > + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); > + > +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_resume, > + TP_PROTO(const char *dev_name, int err, s64 usecs, > + int dev_state, int link_state), > + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); > + > TRACE_EVENT(ufshcd_command, > TP_PROTO(const char *dev_name, enum ufs_trace_str_t str_t, > unsigned int tag, u32 doorbell, int transfer_len, u32 intr, >
On Wed, Feb 24 2021 at 06:34 -0800, Adrian Hunter wrote: >On 24/02/21 7:13 am, Asutosh Das wrote: >> During runtime-suspend of ufs host, the scsi devices are >> already suspended and so are the queues associated with them. >> But the ufs host sends SSU to wlun during its runtime-suspend. >> During the process blk_queue_enter checks if the queue is not in >> suspended state. If so, it waits for the queue to resume, and never >> comes out of it. >> The commit >> (d55d15a33: scsi: block: Do not accept any requests while suspended) >> adds the check if the queue is in suspended state in blk_queue_enter(). >> >> Call trace: >> __switch_to+0x174/0x2c4 >> __schedule+0x478/0x764 >> schedule+0x9c/0xe0 >> blk_queue_enter+0x158/0x228 >> blk_mq_alloc_request+0x40/0xa4 >> blk_get_request+0x2c/0x70 >> __scsi_execute+0x60/0x1c4 >> ufshcd_set_dev_pwr_mode+0x124/0x1e4 >> ufshcd_suspend+0x208/0x83c >> ufshcd_runtime_suspend+0x40/0x154 >> ufshcd_pltfrm_runtime_suspend+0x14/0x20 >> pm_generic_runtime_suspend+0x28/0x3c >> __rpm_callback+0x80/0x2a4 >> rpm_suspend+0x308/0x614 >> rpm_idle+0x158/0x228 >> pm_runtime_work+0x84/0xac >> process_one_work+0x1f0/0x470 >> worker_thread+0x26c/0x4c8 >> kthread+0x13c/0x320 >> ret_from_fork+0x10/0x18 >> >> Fix this by registering ufs device wlun as a scsi driver and >> registering it for block runtime-pm. Also make this as a >> supplier for all other luns. That way, this device wlun >> suspends after all the consumers and resumes after >> hba resumes. >> >> Co-developed-by: Can Guo <cang@codeaurora.org> >> Signed-off-by: Can Guo <cang@codeaurora.org> >> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> >> --- >> drivers/scsi/ufs/ufs-qcom.c | 2 + >> drivers/scsi/ufs/ufshcd-pci.c | 24 -- >> drivers/scsi/ufs/ufshcd-pltfrm.c | 29 +++ >> drivers/scsi/ufs/ufshcd-pltfrm.h | 4 + >> drivers/scsi/ufs/ufshcd.c | 491 +++++++++++++++++++++++++++++++-------- >> drivers/scsi/ufs/ufshcd.h | 5 + >> include/trace/events/ufs.h | 20 ++ >> 7 files changed, 454 insertions(+), 121 deletions(-) >> >> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c >> index f97d7b0..8cd8cfd 100644 >> --- a/drivers/scsi/ufs/ufs-qcom.c >> +++ b/drivers/scsi/ufs/ufs-qcom.c >> @@ -1546,6 +1546,8 @@ static const struct dev_pm_ops ufs_qcom_pm_ops = { >> .runtime_suspend = ufshcd_pltfrm_runtime_suspend, >> .runtime_resume = ufshcd_pltfrm_runtime_resume, >> .runtime_idle = ufshcd_pltfrm_runtime_idle, >> + .prepare = ufshcd_pltfrm_prepare, >> + .resume_early = ufshcd_pltfrm_resume_early, Hi Adrian, Thanks for the detailed review and code pointers. Appreciate it. > >The pair for the "prepare" callback is the "complete" callback rather than >"resume_early" > Ok. I'll check the complete. The idea was to enable runtime-pm before resuming. >Presumably all drivers will need this kind of change. > >> }; Yes. I'll make the changes. >> >> static struct platform_driver ufs_qcom_pltform = { >> diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c >> index fadd566..ab84d56 100644 >> --- a/drivers/scsi/ufs/ufshcd-pci.c >> +++ b/drivers/scsi/ufs/ufshcd-pci.c >> @@ -247,29 +247,6 @@ static int ufshcd_pci_resume(struct device *dev) >> return ufshcd_system_resume(dev_get_drvdata(dev)); >> } >> >> -/** >> - * ufshcd_pci_poweroff - suspend-to-disk poweroff function >> - * @dev: pointer to PCI device handle >> - * >> - * Returns 0 if successful >> - * Returns non-zero otherwise >> - */ >> -static int ufshcd_pci_poweroff(struct device *dev) >> -{ >> - struct ufs_hba *hba = dev_get_drvdata(dev); >> - int spm_lvl = hba->spm_lvl; >> - int ret; >> - >> - /* >> - * For poweroff we need to set the UFS device to PowerDown mode. >> - * Force spm_lvl to ensure that. >> - */ >> - hba->spm_lvl = 5; >> - ret = ufshcd_system_suspend(hba); >> - hba->spm_lvl = spm_lvl; >> - return ret; >> -} >> - >> #endif /* !CONFIG_PM_SLEEP */ >> >> #ifdef CONFIG_PM >> @@ -370,7 +347,6 @@ static const struct dev_pm_ops ufshcd_pci_pm_ops = { >> .resume = ufshcd_pci_resume, >> .freeze = ufshcd_pci_suspend, >> .thaw = ufshcd_pci_resume, >> - .poweroff = ufshcd_pci_poweroff, >> .restore = ufshcd_pci_resume, >> #endif >> SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend, >> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c >> index 1a69949..84550dc 100644 >> --- a/drivers/scsi/ufs/ufshcd-pltfrm.c >> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c >> @@ -217,6 +217,35 @@ int ufshcd_pltfrm_runtime_idle(struct device *dev) >> } >> EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle); >> >> +int ufshcd_pltfrm_prepare(struct device *dev) >> +{ >> + struct ufs_hba *hba = dev_get_drvdata(dev); >> + >> + /* >> + * SCSI assumes that runtime-pm and system-pm for scsi drivers >> + * are same. And it doesn't wake up the device for system-suspend >> + * if it's runtime suspended. But ufs doesn't follow that. >> + * The rpm-lvl and spm-lvl can be different in ufs. >> + * Force it to honor system-suspend. > >Presumably we could check whether the current power mode is different from >the spm_lvl target power mode, and only do this in that case? > Thanks. Yes that's a good idea. >> + */ >> + scsi_autopm_get_device(hba->sdev_ufs_device); >> + /* Refer ufshcd_pltfrm_resume_early() */ >> + pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev); >> + scsi_autopm_put_device(hba->sdev_ufs_device); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_prepare); > >The PCI driver will need this also, so we need a bus-agnostic version >exported from ufshcd.c that all drivers can use, like ufshcd_suspend() etc. > I'll move it to ufshcd.c and export it from there. >> + >> +int ufshcd_pltfrm_resume_early(struct device *dev) >> +{ >> + struct ufs_hba *hba = dev_get_drvdata(dev); >> + >> + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume_early); > >Ditto > OK. >> #endif /* CONFIG_PM */ >> >> void ufshcd_pltfrm_shutdown(struct platform_device *pdev) >> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h >> index 772a8e8..caf2709 100644 >> --- a/drivers/scsi/ufs/ufshcd-pltfrm.h >> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.h >> @@ -40,6 +40,8 @@ int ufshcd_pltfrm_resume(struct device *dev); >> int ufshcd_pltfrm_runtime_suspend(struct device *dev); >> int ufshcd_pltfrm_runtime_resume(struct device *dev); >> int ufshcd_pltfrm_runtime_idle(struct device *dev); >> +int ufshcd_pltfrm_prepare(struct device *dev); >> +int ufshcd_pltfrm_resume_early(struct device *dev); >> >> #else /* !CONFIG_PM */ >> >> @@ -48,6 +50,8 @@ int ufshcd_pltfrm_runtime_idle(struct device *dev); >> #define ufshcd_pltfrm_runtime_suspend NULL >> #define ufshcd_pltfrm_runtime_resume NULL >> #define ufshcd_pltfrm_runtime_idle NULL >> +#define ufshcd_pltfrm_prepare NULL >> +#define ufshcd_pltfrm_resume_early NULL >> >> #endif /* CONFIG_PM */ >> >> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c >> index 45624c7..bc96544 100644 >> --- a/drivers/scsi/ufs/ufshcd.c >> +++ b/drivers/scsi/ufs/ufshcd.c >> @@ -16,6 +16,7 @@ >> #include <linux/bitfield.h> >> #include <linux/blk-pm.h> >> #include <linux/blkdev.h> >> +#include <scsi/scsi_driver.h> >> #include "ufshcd.h" >> #include "ufs_quirks.h" >> #include "unipro.h" >> @@ -78,6 +79,8 @@ >> /* Polling time to wait for fDeviceInit */ >> #define FDEVICEINIT_COMPL_TIMEOUT 1500 /* millisecs */ >> >> +#define wlun_dev_to_hba(dv) shost_priv(to_scsi_device(dv)->host) >> + >> #define ufshcd_toggle_vreg(_dev, _vreg, _on) \ >> ({ \ >> int _ret; \ >> @@ -251,6 +254,12 @@ static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set); >> static inline int ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable); >> static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba); >> static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba); >> +static int ufshcd_wl_runtime_suspend(struct device *dev); >> +static int ufshcd_wl_runtime_resume(struct device *dev); >> +static int ufshcd_wl_suspend(struct device *dev); >> +static int ufshcd_wl_resume(struct device *dev); >> +static void ufshcd_wl_shutdown(struct device *dev); >> +static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun); >> >> static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag) >> { >> @@ -1556,7 +1565,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev, >> if (value == hba->clk_scaling.is_enabled) >> goto out; >> >> - pm_runtime_get_sync(hba->dev); >> + scsi_autopm_get_device(hba->sdev_ufs_device); >> ufshcd_hold(hba, false); >> >> hba->clk_scaling.is_enabled = value; >> @@ -1572,7 +1581,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev, >> } >> >> ufshcd_release(hba); >> - pm_runtime_put_sync(hba->dev); >> + scsi_autopm_put_device(hba->sdev_ufs_device); >> out: >> up(&hba->host_sem); >> return err ? err : count; >> @@ -2572,6 +2581,17 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id) >> return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE; >> } >> >> +static inline bool is_rpmb_wlun(struct scsi_device *sdev) >> +{ >> + return (sdev->lun == ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN)); >> +} >> + >> +static inline bool is_device_wlun(struct scsi_device *sdev) >> +{ >> + return (sdev->lun == >> + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN)); >> +} >> + >> static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i) >> { >> struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr; >> @@ -4808,6 +4828,41 @@ static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba, >> } >> >> /** >> + * ufshcd_setup_links - associate link b/w device wlun and other luns >> + * @sdev: pointer to SCSI device >> + * @hba: pointer to ufs hba >> + */ >> +static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev) >> +{ >> + struct device_link *link; >> + >> + /* >> + * device wlun is the supplier & rest of the luns are consumers >> + * This ensures that device wlun suspends after all other luns. >> + */ >> + if (hba->sdev_ufs_device) { >> + link = device_link_add(&sdev->sdev_gendev, >> + &hba->sdev_ufs_device->sdev_gendev, >> + DL_FLAG_PM_RUNTIME); >> + if (!link) { >> + dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n", >> + dev_name(&hba->sdev_ufs_device->sdev_gendev)); >> + return; >> + } >> + hba->luns_avail--; >> + /* Ignore REPORT_LUN wlun probing */ >> + if (hba->luns_avail != 1) >> + return; >> + >> + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev); >> + pm_runtime_mark_last_busy(&hba->sdev_ufs_device->sdev_gendev); >> + } else { >> + /* device wlun is probed */ >> + hba->luns_avail--; >> + } >> +} >> + >> +/** >> * ufshcd_slave_alloc - handle initial SCSI device configurations >> * @sdev: pointer to SCSI device >> * >> @@ -4838,6 +4893,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev) >> >> ufshcd_get_lu_power_on_wp_status(hba, sdev); >> >> + ufshcd_setup_links(hba, sdev); >> + >> return 0; >> } >> >> @@ -4984,16 +5041,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) >> * solution could be to abort the system suspend if >> * UFS device needs urgent BKOPs. >> */ >> - if (!hba->pm_op_in_progress && >> - ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) && >> - schedule_work(&hba->eeh_work)) { >> - /* >> - * Prevent suspend once eeh_work is scheduled >> - * to avoid deadlock between ufshcd_suspend >> - * and exception event handler. >> - */ >> - pm_runtime_get_noresume(hba->dev); >> - } >> + if (ufshcd_is_exception_event(lrbp->ucd_rsp_ptr)) >> + /* Flushed in suspend */ >> + schedule_work(&hba->eeh_work); >> break; >> case UPIU_TRANSACTION_REJECT_UPIU: >> /* TODO: handle Reject UPIU Response */ >> @@ -5589,8 +5639,8 @@ static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work) >> * after a certain delay to recheck the threshold by next runtime >> * suspend. >> */ >> - pm_runtime_get_sync(hba->dev); >> - pm_runtime_put_sync(hba->dev); >> + scsi_autopm_get_device(hba->sdev_ufs_device); >> + scsi_autopm_put_device(hba->sdev_ufs_device); >> } >> >> /** >> @@ -5607,7 +5657,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work) >> u32 status = 0; >> hba = container_of(work, struct ufs_hba, eeh_work); >> >> - pm_runtime_get_sync(hba->dev); >> ufshcd_scsi_block_requests(hba); >> err = ufshcd_get_ee_status(hba, &status); >> if (err) { >> @@ -5623,14 +5672,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work) >> >> out: >> ufshcd_scsi_unblock_requests(hba); >> - /* >> - * pm_runtime_get_noresume is called while scheduling >> - * eeh_work to avoid suspend racing with exception work. >> - * Hence decrement usage counter using pm_runtime_put_noidle >> - * to allow suspend on completion of exception event handler. >> - */ >> - pm_runtime_put_noidle(hba->dev); >> - pm_runtime_put(hba->dev); >> return; >> } >> >> @@ -7254,6 +7295,15 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba) >> goto out; >> } >> ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device); >> + /* >> + * A pm_runtime_put_sync is invoked when this device enables blk_pm_runtime >> + * & would suspend the device-wlun upon timer expiry. >> + * But suspending device wlun _may_ put the ufs device in the pre-defined >> + * low power mode (SSU <rpm_lvl>). Probing of other luns may fail then. >> + * Don't allow this suspend until all the luns have been probed. >> + * See pm_runtime_mark_last_busy in ufshcd_setup_links. >> + */ >> + pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev); >> scsi_device_put(hba->sdev_ufs_device); >> >> hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0, >> @@ -7417,6 +7467,9 @@ static int ufs_get_device_desc(struct ufs_hba *hba) >> goto out; >> } >> >> + hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] + >> + desc_buf[DEVICE_DESC_PARAM_NUM_WLU]; >> + >> ufs_fixup_device_setup(hba); >> >> ufshcd_wb_probe(hba, desc_buf); >> @@ -7747,6 +7800,95 @@ static int ufshcd_device_params_init(struct ufs_hba *hba) >> return ret; >> } >> >> +static int ufshcd_wl_probe(struct device *dev) >> +{ >> + return is_device_wlun(to_scsi_device(dev)) ? 0 : -ENODEV; >> +} >> + >> +static int ufshcd_wl_remove(struct device *dev) >> +{ >> + return 0; >> +} >> + >> +static const struct dev_pm_ops ufshcd_wl_pm_ops = { >> + SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL) >> + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_wl_suspend, ufshcd_wl_resume) > >Here SET_SYSTEM_SLEEP_PM_OPS sets .poweroff to ufshcd_wl_suspend() which is >only correct if spm_lvl is 5. We need it to do what ufshcd_wl_shutdown() >does, although the PM functions return 'int' whereas ->shutdown() returns >'void', so it cannot use the same prototype i.e. > >static int ufshcd_wl_poweroff(struct device *dev) >{ > ufshcd_wl_shutdown(dev); > return 0; >} > >Then, > .suspend = ufshcd_wl_suspend, > .resume = ufshcd_wl_resume, > .freeze = ufshcd_wl_suspend, > .thaw = ufshcd_wl_resume, > .poweroff = ufshcd_wl_poweroff, > .restore = ufshcd_wl_resume, > > Got it. Thanks! >> +}; >> + >> +/** >> + * ufs_dev_wlun_template - describes ufs device wlun >> + * ufs-device wlun - used to send pm commands >> + * All luns are consumers of ufs-device wlun. >> + * >> + * Currently, no sd driver is present for wluns. >> + * Hence the no specific pm operations are performed. >> + * With ufs design, SSU should be sent to ufs-device wlun. >> + * Hence register a scsi driver for ufs wluns only. >> + */ >> +static struct scsi_driver ufs_dev_wlun_template = { >> + .gendrv = { >> + .name = "ufs_device_wlun", >> + .owner = THIS_MODULE, >> + .probe = ufshcd_wl_probe, >> + .remove = ufshcd_wl_remove, >> + .pm = &ufshcd_wl_pm_ops, >> + .shutdown = ufshcd_wl_shutdown, >> + }, >> +}; >> + >> +static int ufshcd_rpmb_probe(struct device *dev) >> +{ >> + return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV; >> +} >> + >> +static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba) >> +{ >> + int ret = 0; >> + >> + if (!hba->wlun_rpmb_clr_ua) >> + return 0; >> + ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN); >> + if (!ret) >> + hba->wlun_rpmb_clr_ua = 0; >> + return ret; >> +} >> + >> +static int ufshcd_rpmb_runtime_resume(struct device *dev) >> +{ >> + struct ufs_hba *hba = wlun_dev_to_hba(dev); >> + >> + if (hba->sdev_rpmb) >> + return ufshcd_clear_rpmb_uac(hba); >> + return 0; >> +} >> + >> +static int ufshcd_rpmb_resume(struct device *dev) >> +{ >> + struct ufs_hba *hba = wlun_dev_to_hba(dev); >> + >> + if (hba->sdev_rpmb && !pm_runtime_suspended(dev)) >> + return ufshcd_clear_rpmb_uac(hba); >> + return 0; >> +} >> + >> +static const struct dev_pm_ops ufs_rpmb_pm_ops = { >> + SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_runtime_resume, NULL) >> + SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume) >> +}; >> + >> +/** >> + * Describes the ufs rpmb wlun. >> + * Used only to send uac. >> + */ >> +static struct scsi_driver ufs_rpmb_wlun_template = { >> + .gendrv = { >> + .name = "ufs_rpmb_wlun", >> + .owner = THIS_MODULE, >> + .probe = ufshcd_rpmb_probe, >> + .pm = &ufs_rpmb_pm_ops, >> + }, >> +}; >> + >> /** >> * ufshcd_add_lus - probe and add UFS logical units >> * @hba: per-adapter instance >> @@ -7755,6 +7897,19 @@ static int ufshcd_add_lus(struct ufs_hba *hba) >> { >> int ret; >> >> + ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv); >> + if (ret) { >> + dev_err(hba->dev, "Register device wlun driver failed: %d\n", >> + ret); >> + return ret; >> + } > >This is assuming there is only one UFS host controller, which is probably >true but not something that we should assume. Moving this to >ufshcd_core_init() might also avoid some more of the forward declarations. > OK, got it. >> + >> + ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv); >> + if (ret) { >> + dev_err(hba->dev, "Register device wlun driver failed: %d\n", >> + ret); >> + return ret; >> + } >> /* Add required well known logical units to scsi mid layer */ >> ret = ufshcd_scsi_add_wlus(hba); >> if (ret) >> @@ -7892,6 +8047,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async) >> ufshcd_set_ufs_dev_active(hba); >> ufshcd_force_reset_auto_bkops(hba); >> hba->wlun_dev_clr_ua = true; >> + hba->wlun_rpmb_clr_ua = true; >> >> /* Gear up to HS gear if supported */ >> if (hba->max_pwr_info.is_valid) { >> @@ -7964,6 +8120,7 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie) >> pm_runtime_put_sync(hba->dev); >> ufshcd_hba_exit(hba); >> } >> + hba->init_done = true; >> } >> >> static const struct attribute_group *ufshcd_driver_groups[] = { >> @@ -8475,7 +8632,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, >> * handling context. >> */ >> hba->host->eh_noresume = 1; >> - ufshcd_clear_ua_wluns(hba); >> + if (hba->wlun_dev_clr_ua) >> + ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN); >> >> cmd[4] = pwr_mode << 4; >> >> @@ -8650,31 +8808,19 @@ static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba) >> ufshcd_setup_hba_vreg(hba, true); >> } >> >> -/** >> - * ufshcd_suspend - helper function for suspend operations >> - * @hba: per adapter instance >> - * @pm_op: desired low power operation type >> - * >> - * This function will try to put the UFS device and link into low power >> - * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl" >> - * (System PM level). >> - * >> - * If this function is called during shutdown, it will make sure that >> - * both UFS device and UFS link is powered off. >> - * >> - * NOTE: UFS device & link must be active before we enter in this function. >> - * >> - * Returns 0 for success and non-zero for failure >> - */ >> -static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> +static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> { >> int ret = 0; >> - int check_for_bkops; >> enum ufs_pm_level pm_lvl; >> enum ufs_dev_pwr_mode req_dev_pwr_mode; >> enum uic_link_state req_link_state; >> >> - hba->pm_op_in_progress = 1; >> + /* >> + * Is invoked when the device wlun is added to sysfs >> + * But by then hba->sdev_ufs_device may not be initialized. >> + */ >> + if (!hba->init_done) >> + return 0; >> if (!ufshcd_is_shutdown_pm(pm_op)) { >> pm_lvl = ufshcd_is_runtime_pm(pm_op) ? >> hba->rpm_lvl : hba->spm_lvl; >> @@ -8690,24 +8836,23 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> * just gate the clocks. >> */ >> ufshcd_hold(hba, false); >> - hba->clk_gating.is_suspended = true; >> >> if (ufshcd_is_clkscaling_supported(hba)) >> ufshcd_clk_scaling_suspend(hba, true); >> >> if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE && >> req_link_state == UIC_LINK_ACTIVE_STATE) { >> - goto disable_clks; >> + goto enable_scaling; >> } >> >> if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) && >> (req_link_state == hba->uic_link_state)) >> - goto enable_gating; >> + goto enable_scaling; >> >> /* UFS device & link must be active before we enter in this function */ >> if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) { >> ret = -EINVAL; >> - goto enable_gating; >> + goto enable_scaling; >> } >> >> if (ufshcd_is_runtime_pm(pm_op)) { >> @@ -8719,7 +8864,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> */ >> ret = ufshcd_urgent_bkops(hba); >> if (ret) >> - goto enable_gating; >> + goto enable_scaling; >> } else { >> /* make sure that auto bkops is disabled */ >> ufshcd_disable_auto_bkops(hba); >> @@ -8746,10 +8891,206 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> >> if (!hba->dev_info.b_rpm_dev_flush_capable) { >> ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode); >> - if (ret) >> - goto enable_gating; >> + if (!ret) >> + goto out; >> } >> } >> +enable_scaling: >> + if (ufshcd_is_clkscaling_supported(hba)) >> + ufshcd_clk_scaling_suspend(hba, false); >> + >> + hba->dev_info.b_rpm_dev_flush_capable = false; >> +out: >> + if (hba->dev_info.b_rpm_dev_flush_capable) { >> + schedule_delayed_work(&hba->rpm_dev_flush_recheck_work, >> + msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS)); >> + } >> + if (ret) >> + ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret); >> + ufshcd_release(hba); >> + return ret; >> +} >> + >> +static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> +{ >> + int ret = 0; >> + >> + if (!hba->init_done) >> + return 0; >> + >> + ufshcd_hold(hba, false); >> + if (ufshcd_is_ufs_dev_deepsleep(hba)) { >> + /* The device is in DeepSleep but hba was not suspended */ >> + ret = ufshcd_reset_and_restore(hba); >> + if (ret) >> + goto out; >> + } >> + >> + if (!ufshcd_is_ufs_dev_active(hba)) { >> + ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); >> + if (ret) >> + goto out; >> + } >> + >> + if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) >> + ufshcd_enable_auto_bkops(hba); >> + else >> + /* >> + * If BKOPs operations are urgently needed at this moment then >> + * keep auto-bkops enabled or else disable it. >> + */ >> + ufshcd_urgent_bkops(hba); >> + >> + if (hba->clk_scaling.is_allowed) >> + ufshcd_resume_clkscaling(hba); >> + >> + if (hba->dev_info.b_rpm_dev_flush_capable) { >> + hba->dev_info.b_rpm_dev_flush_capable = false; >> + cancel_delayed_work(&hba->rpm_dev_flush_recheck_work); >> + } >> + >> +out: >> + if (ret) >> + ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret); >> + ufshcd_release(hba); >> + return ret; >> +} >> + >> +static int ufshcd_wl_runtime_suspend(struct device *dev) >> +{ >> + struct scsi_device *sdev = to_scsi_device(dev); >> + struct ufs_hba *hba; >> + int ret; >> + ktime_t start = ktime_get(); >> + >> + hba = shost_priv(sdev->host); >> + >> + ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM); >> + if (ret) >> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); >> + >> + trace_ufshcd_wl_runtime_suspend(dev_name(dev), ret, >> + ktime_to_us(ktime_sub(ktime_get(), start)), >> + hba->curr_dev_pwr_mode, hba->uic_link_state); >> + >> + return ret; >> +} >> + >> +static int ufshcd_wl_runtime_resume(struct device *dev) >> +{ >> + struct scsi_device *sdev = to_scsi_device(dev); >> + struct ufs_hba *hba; >> + int ret = 0; >> + ktime_t start = ktime_get(); >> + >> + hba = shost_priv(sdev->host); >> + >> + ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM); >> + if (ret) >> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); >> + >> + trace_ufshcd_wl_runtime_resume(dev_name(dev), ret, >> + ktime_to_us(ktime_sub(ktime_get(), start)), >> + hba->curr_dev_pwr_mode, hba->uic_link_state); >> + >> + return ret; >> +} >> + >> +static int ufshcd_wl_suspend(struct device *dev) >> +{ >> + struct scsi_device *sdev = to_scsi_device(dev); >> + struct ufs_hba *hba; >> + int ret; >> + ktime_t start = ktime_get(); >> + >> + hba = shost_priv(sdev->host); >> + ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM); >> + if (ret) >> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); >> + >> + trace_ufshcd_wl_suspend(dev_name(dev), ret, >> + ktime_to_us(ktime_sub(ktime_get(), start)), >> + hba->curr_dev_pwr_mode, hba->uic_link_state); >> + >> + return ret; >> +} >> + >> +static int ufshcd_wl_resume(struct device *dev) >> +{ >> + struct scsi_device *sdev = to_scsi_device(dev); >> + struct ufs_hba *hba; >> + int ret = 0; >> + ktime_t start = ktime_get(); >> + >> + if (pm_runtime_suspended(dev)) >> + return 0; >> + hba = shost_priv(sdev->host); >> + >> + ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM); >> + if (ret) >> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); >> + >> + trace_ufshcd_wl_resume(dev_name(dev), ret, >> + ktime_to_us(ktime_sub(ktime_get(), start)), >> + hba->curr_dev_pwr_mode, hba->uic_link_state); >> + >> + return ret; >> +} >> + >> +static void ufshcd_wl_shutdown(struct device *dev) >> +{ >> + struct scsi_device *sdev = to_scsi_device(dev); >> + struct ufs_hba *hba; >> + >> + hba = shost_priv(sdev->host); >> + scsi_device_quiesce(sdev); >> + shost_for_each_device(sdev, hba->host) { >> + if (sdev == hba->sdev_ufs_device) >> + continue; >> + scsi_device_quiesce(sdev); >> + } >> + __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM); >> +} >> + >> +/** >> + * ufshcd_suspend - helper function for suspend operations >> + * @hba: per adapter instance >> + * @pm_op: desired low power operation type >> + * >> + * This function will try to put the UFS link into low power >> + * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl" >> + * (System PM level). >> + * >> + * If this function is called during shutdown, it will make sure that >> + * link is powered off. >> + * >> + * Returns 0 for success and non-zero for failure >> + */ >> +static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> +{ >> + int ret = 0; >> + int check_for_bkops; >> + enum ufs_pm_level pm_lvl; >> + enum ufs_dev_pwr_mode req_dev_pwr_mode; >> + enum uic_link_state req_link_state; >> + >> + hba->pm_op_in_progress = 1; >> + if (!ufshcd_is_shutdown_pm(pm_op)) { >> + pm_lvl = ufshcd_is_runtime_pm(pm_op) ? >> + hba->rpm_lvl : hba->spm_lvl; >> + req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl); >> + req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl); >> + } else { >> + req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE; >> + req_link_state = UIC_LINK_OFF_STATE; >> + } >> + >> + /* >> + * If we can't transition into any of the low power modes >> + * just gate the clocks. >> + */ >> + ufshcd_hold(hba, false); >> + hba->clk_gating.is_suspended = true; >> >> /* >> * In the case of DeepSleep, the device is expected to remain powered >> @@ -8758,9 +9099,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba); >> ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops); >> if (ret) >> - goto set_dev_active; >> + goto enable_gating; >> >> -disable_clks: >> /* >> * Call vendor specific suspend callback. As these callbacks may access >> * vendor specific host controller register space call them before the >> @@ -8790,7 +9130,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> goto out; >> >> set_link_active: >> - ufshcd_vreg_set_hpm(hba); >> /* >> * Device hardware reset is required to exit DeepSleep. Also, for >> * DeepSleep, the link is off so host reset and restore will be done >> @@ -8804,28 +9143,15 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> ufshcd_set_link_active(hba); >> else if (ufshcd_is_link_off(hba)) >> ufshcd_host_reset_and_restore(hba); >> -set_dev_active: >> /* Can also get here needing to exit DeepSleep */ >> if (ufshcd_is_ufs_dev_deepsleep(hba)) { >> ufshcd_device_reset(hba); >> ufshcd_host_reset_and_restore(hba); >> } >> - if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE)) >> - ufshcd_disable_auto_bkops(hba); >> enable_gating: >> - if (ufshcd_is_clkscaling_supported(hba)) >> - ufshcd_clk_scaling_suspend(hba, false); >> - >> hba->clk_gating.is_suspended = false; >> - hba->dev_info.b_rpm_dev_flush_capable = false; >> - ufshcd_clear_ua_wluns(hba); >> ufshcd_release(hba); >> out: >> - if (hba->dev_info.b_rpm_dev_flush_capable) { >> - schedule_delayed_work(&hba->rpm_dev_flush_recheck_work, >> - msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS)); >> - } >> - >> hba->pm_op_in_progress = 0; >> >> if (ret) >> @@ -8846,10 +9172,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> { >> int ret; >> - enum uic_link_state old_link_state; >> >> hba->pm_op_in_progress = 1; >> - old_link_state = hba->uic_link_state; >> >> ufshcd_hba_vreg_set_hpm(hba); >> ret = ufshcd_vreg_set_hpm(hba); >> @@ -8901,43 +9225,14 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) >> goto vendor_suspend; >> } >> >> - if (!ufshcd_is_ufs_dev_active(hba)) { >> - ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); >> - if (ret) >> - goto set_old_link_state; >> - } >> - >> - if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) >> - ufshcd_enable_auto_bkops(hba); >> - else >> - /* >> - * If BKOPs operations are urgently needed at this moment then >> - * keep auto-bkops enabled or else disable it. >> - */ >> - ufshcd_urgent_bkops(hba); >> - >> - hba->clk_gating.is_suspended = false; >> - >> - if (ufshcd_is_clkscaling_supported(hba)) >> - ufshcd_clk_scaling_suspend(hba, false); >> - >> /* Enable Auto-Hibernate if configured */ >> ufshcd_auto_hibern8_enable(hba); >> >> - if (hba->dev_info.b_rpm_dev_flush_capable) { >> - hba->dev_info.b_rpm_dev_flush_capable = false; >> - cancel_delayed_work(&hba->rpm_dev_flush_recheck_work); >> - } >> - >> - ufshcd_clear_ua_wluns(hba); >> - >> /* Schedule clock gating in case of no access to UFS device yet */ >> ufshcd_release(hba); >> >> goto out; >> >> -set_old_link_state: >> - ufshcd_link_state_transition(hba, old_link_state, 0); >> vendor_suspend: >> ufshcd_vops_suspend(hba, pm_op); >> disable_irq_and_vops_clks: >> @@ -9170,6 +9465,8 @@ EXPORT_SYMBOL(ufshcd_shutdown); >> void ufshcd_remove(struct ufs_hba *hba) >> { >> ufs_bsg_remove(hba); >> + scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); >> + scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv); >> ufs_sysfs_remove_nodes(hba->dev); >> blk_cleanup_queue(hba->tmf_queue); >> blk_mq_free_tag_set(&hba->tmf_tag_set); >> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h >> index ee61f82..9087593 100644 >> --- a/drivers/scsi/ufs/ufshcd.h >> +++ b/drivers/scsi/ufs/ufshcd.h >> @@ -72,6 +72,8 @@ enum ufs_event_type { >> UFS_EVT_LINK_STARTUP_FAIL, >> UFS_EVT_RESUME_ERR, >> UFS_EVT_SUSPEND_ERR, >> + UFS_EVT_WL_SUSP_ERR, >> + UFS_EVT_WL_RES_ERR, >> >> /* abnormal events */ >> UFS_EVT_DEV_RESET, >> @@ -804,6 +806,7 @@ struct ufs_hba { >> struct list_head clk_list_head; >> >> bool wlun_dev_clr_ua; >> + bool wlun_rpmb_clr_ua; >> >> /* Number of requests aborts */ >> int req_abort_count; >> @@ -841,6 +844,8 @@ struct ufs_hba { >> #ifdef CONFIG_DEBUG_FS >> struct dentry *debugfs_root; >> #endif >> + bool init_done; >> + u32 luns_avail; >> }; >> >> /* Returns true if clocks can be gated. Otherwise false */ >> diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h >> index e151477..d9d233b 100644 >> --- a/include/trace/events/ufs.h >> +++ b/include/trace/events/ufs.h >> @@ -246,6 +246,26 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init, >> int dev_state, int link_state), >> TP_ARGS(dev_name, err, usecs, dev_state, link_state)); >> >> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_suspend, >> + TP_PROTO(const char *dev_name, int err, s64 usecs, >> + int dev_state, int link_state), >> + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); >> + >> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_resume, >> + TP_PROTO(const char *dev_name, int err, s64 usecs, >> + int dev_state, int link_state), >> + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); >> + >> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_suspend, >> + TP_PROTO(const char *dev_name, int err, s64 usecs, >> + int dev_state, int link_state), >> + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); >> + >> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_resume, >> + TP_PROTO(const char *dev_name, int err, s64 usecs, >> + int dev_state, int link_state), >> + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); >> + >> TRACE_EVENT(ufshcd_command, >> TP_PROTO(const char *dev_name, enum ufs_trace_str_t str_t, >> unsigned int tag, u32 doorbell, int transfer_len, u32 intr, >> >
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index f97d7b0..8cd8cfd 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -1546,6 +1546,8 @@ static const struct dev_pm_ops ufs_qcom_pm_ops = { .runtime_suspend = ufshcd_pltfrm_runtime_suspend, .runtime_resume = ufshcd_pltfrm_runtime_resume, .runtime_idle = ufshcd_pltfrm_runtime_idle, + .prepare = ufshcd_pltfrm_prepare, + .resume_early = ufshcd_pltfrm_resume_early, }; static struct platform_driver ufs_qcom_pltform = { diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c index fadd566..ab84d56 100644 --- a/drivers/scsi/ufs/ufshcd-pci.c +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -247,29 +247,6 @@ static int ufshcd_pci_resume(struct device *dev) return ufshcd_system_resume(dev_get_drvdata(dev)); } -/** - * ufshcd_pci_poweroff - suspend-to-disk poweroff function - * @dev: pointer to PCI device handle - * - * Returns 0 if successful - * Returns non-zero otherwise - */ -static int ufshcd_pci_poweroff(struct device *dev) -{ - struct ufs_hba *hba = dev_get_drvdata(dev); - int spm_lvl = hba->spm_lvl; - int ret; - - /* - * For poweroff we need to set the UFS device to PowerDown mode. - * Force spm_lvl to ensure that. - */ - hba->spm_lvl = 5; - ret = ufshcd_system_suspend(hba); - hba->spm_lvl = spm_lvl; - return ret; -} - #endif /* !CONFIG_PM_SLEEP */ #ifdef CONFIG_PM @@ -370,7 +347,6 @@ static const struct dev_pm_ops ufshcd_pci_pm_ops = { .resume = ufshcd_pci_resume, .freeze = ufshcd_pci_suspend, .thaw = ufshcd_pci_resume, - .poweroff = ufshcd_pci_poweroff, .restore = ufshcd_pci_resume, #endif SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend, diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index 1a69949..84550dc 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -217,6 +217,35 @@ int ufshcd_pltfrm_runtime_idle(struct device *dev) } EXPORT_SYMBOL_GPL(ufshcd_pltfrm_runtime_idle); +int ufshcd_pltfrm_prepare(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + /* + * SCSI assumes that runtime-pm and system-pm for scsi drivers + * are same. And it doesn't wake up the device for system-suspend + * if it's runtime suspended. But ufs doesn't follow that. + * The rpm-lvl and spm-lvl can be different in ufs. + * Force it to honor system-suspend. + */ + scsi_autopm_get_device(hba->sdev_ufs_device); + /* Refer ufshcd_pltfrm_resume_early() */ + pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev); + scsi_autopm_put_device(hba->sdev_ufs_device); + + return 0; +} +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_prepare); + +int ufshcd_pltfrm_resume_early(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev); + + return 0; +} +EXPORT_SYMBOL_GPL(ufshcd_pltfrm_resume_early); #endif /* CONFIG_PM */ void ufshcd_pltfrm_shutdown(struct platform_device *pdev) diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/scsi/ufs/ufshcd-pltfrm.h index 772a8e8..caf2709 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.h +++ b/drivers/scsi/ufs/ufshcd-pltfrm.h @@ -40,6 +40,8 @@ int ufshcd_pltfrm_resume(struct device *dev); int ufshcd_pltfrm_runtime_suspend(struct device *dev); int ufshcd_pltfrm_runtime_resume(struct device *dev); int ufshcd_pltfrm_runtime_idle(struct device *dev); +int ufshcd_pltfrm_prepare(struct device *dev); +int ufshcd_pltfrm_resume_early(struct device *dev); #else /* !CONFIG_PM */ @@ -48,6 +50,8 @@ int ufshcd_pltfrm_runtime_idle(struct device *dev); #define ufshcd_pltfrm_runtime_suspend NULL #define ufshcd_pltfrm_runtime_resume NULL #define ufshcd_pltfrm_runtime_idle NULL +#define ufshcd_pltfrm_prepare NULL +#define ufshcd_pltfrm_resume_early NULL #endif /* CONFIG_PM */ diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 45624c7..bc96544 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -16,6 +16,7 @@ #include <linux/bitfield.h> #include <linux/blk-pm.h> #include <linux/blkdev.h> +#include <scsi/scsi_driver.h> #include "ufshcd.h" #include "ufs_quirks.h" #include "unipro.h" @@ -78,6 +79,8 @@ /* Polling time to wait for fDeviceInit */ #define FDEVICEINIT_COMPL_TIMEOUT 1500 /* millisecs */ +#define wlun_dev_to_hba(dv) shost_priv(to_scsi_device(dv)->host) + #define ufshcd_toggle_vreg(_dev, _vreg, _on) \ ({ \ int _ret; \ @@ -251,6 +254,12 @@ static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set); static inline int ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable); static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba); static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba); +static int ufshcd_wl_runtime_suspend(struct device *dev); +static int ufshcd_wl_runtime_resume(struct device *dev); +static int ufshcd_wl_suspend(struct device *dev); +static int ufshcd_wl_resume(struct device *dev); +static void ufshcd_wl_shutdown(struct device *dev); +static int ufshcd_clear_ua_wlun(struct ufs_hba *hba, u8 wlun); static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag) { @@ -1556,7 +1565,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev, if (value == hba->clk_scaling.is_enabled) goto out; - pm_runtime_get_sync(hba->dev); + scsi_autopm_get_device(hba->sdev_ufs_device); ufshcd_hold(hba, false); hba->clk_scaling.is_enabled = value; @@ -1572,7 +1581,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev, } ufshcd_release(hba); - pm_runtime_put_sync(hba->dev); + scsi_autopm_put_device(hba->sdev_ufs_device); out: up(&hba->host_sem); return err ? err : count; @@ -2572,6 +2581,17 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id) return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE; } +static inline bool is_rpmb_wlun(struct scsi_device *sdev) +{ + return (sdev->lun == ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN)); +} + +static inline bool is_device_wlun(struct scsi_device *sdev) +{ + return (sdev->lun == + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN)); +} + static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i) { struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr; @@ -4808,6 +4828,41 @@ static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba, } /** + * ufshcd_setup_links - associate link b/w device wlun and other luns + * @sdev: pointer to SCSI device + * @hba: pointer to ufs hba + */ +static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev) +{ + struct device_link *link; + + /* + * device wlun is the supplier & rest of the luns are consumers + * This ensures that device wlun suspends after all other luns. + */ + if (hba->sdev_ufs_device) { + link = device_link_add(&sdev->sdev_gendev, + &hba->sdev_ufs_device->sdev_gendev, + DL_FLAG_PM_RUNTIME); + if (!link) { + dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n", + dev_name(&hba->sdev_ufs_device->sdev_gendev)); + return; + } + hba->luns_avail--; + /* Ignore REPORT_LUN wlun probing */ + if (hba->luns_avail != 1) + return; + + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev); + pm_runtime_mark_last_busy(&hba->sdev_ufs_device->sdev_gendev); + } else { + /* device wlun is probed */ + hba->luns_avail--; + } +} + +/** * ufshcd_slave_alloc - handle initial SCSI device configurations * @sdev: pointer to SCSI device * @@ -4838,6 +4893,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev) ufshcd_get_lu_power_on_wp_status(hba, sdev); + ufshcd_setup_links(hba, sdev); + return 0; } @@ -4984,16 +5041,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) * solution could be to abort the system suspend if * UFS device needs urgent BKOPs. */ - if (!hba->pm_op_in_progress && - ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) && - schedule_work(&hba->eeh_work)) { - /* - * Prevent suspend once eeh_work is scheduled - * to avoid deadlock between ufshcd_suspend - * and exception event handler. - */ - pm_runtime_get_noresume(hba->dev); - } + if (ufshcd_is_exception_event(lrbp->ucd_rsp_ptr)) + /* Flushed in suspend */ + schedule_work(&hba->eeh_work); break; case UPIU_TRANSACTION_REJECT_UPIU: /* TODO: handle Reject UPIU Response */ @@ -5589,8 +5639,8 @@ static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work) * after a certain delay to recheck the threshold by next runtime * suspend. */ - pm_runtime_get_sync(hba->dev); - pm_runtime_put_sync(hba->dev); + scsi_autopm_get_device(hba->sdev_ufs_device); + scsi_autopm_put_device(hba->sdev_ufs_device); } /** @@ -5607,7 +5657,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work) u32 status = 0; hba = container_of(work, struct ufs_hba, eeh_work); - pm_runtime_get_sync(hba->dev); ufshcd_scsi_block_requests(hba); err = ufshcd_get_ee_status(hba, &status); if (err) { @@ -5623,14 +5672,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work) out: ufshcd_scsi_unblock_requests(hba); - /* - * pm_runtime_get_noresume is called while scheduling - * eeh_work to avoid suspend racing with exception work. - * Hence decrement usage counter using pm_runtime_put_noidle - * to allow suspend on completion of exception event handler. - */ - pm_runtime_put_noidle(hba->dev); - pm_runtime_put(hba->dev); return; } @@ -7254,6 +7295,15 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba) goto out; } ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device); + /* + * A pm_runtime_put_sync is invoked when this device enables blk_pm_runtime + * & would suspend the device-wlun upon timer expiry. + * But suspending device wlun _may_ put the ufs device in the pre-defined + * low power mode (SSU <rpm_lvl>). Probing of other luns may fail then. + * Don't allow this suspend until all the luns have been probed. + * See pm_runtime_mark_last_busy in ufshcd_setup_links. + */ + pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev); scsi_device_put(hba->sdev_ufs_device); hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0, @@ -7417,6 +7467,9 @@ static int ufs_get_device_desc(struct ufs_hba *hba) goto out; } + hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] + + desc_buf[DEVICE_DESC_PARAM_NUM_WLU]; + ufs_fixup_device_setup(hba); ufshcd_wb_probe(hba, desc_buf); @@ -7747,6 +7800,95 @@ static int ufshcd_device_params_init(struct ufs_hba *hba) return ret; } +static int ufshcd_wl_probe(struct device *dev) +{ + return is_device_wlun(to_scsi_device(dev)) ? 0 : -ENODEV; +} + +static int ufshcd_wl_remove(struct device *dev) +{ + return 0; +} + +static const struct dev_pm_ops ufshcd_wl_pm_ops = { + SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_wl_suspend, ufshcd_wl_resume) +}; + +/** + * ufs_dev_wlun_template - describes ufs device wlun + * ufs-device wlun - used to send pm commands + * All luns are consumers of ufs-device wlun. + * + * Currently, no sd driver is present for wluns. + * Hence the no specific pm operations are performed. + * With ufs design, SSU should be sent to ufs-device wlun. + * Hence register a scsi driver for ufs wluns only. + */ +static struct scsi_driver ufs_dev_wlun_template = { + .gendrv = { + .name = "ufs_device_wlun", + .owner = THIS_MODULE, + .probe = ufshcd_wl_probe, + .remove = ufshcd_wl_remove, + .pm = &ufshcd_wl_pm_ops, + .shutdown = ufshcd_wl_shutdown, + }, +}; + +static int ufshcd_rpmb_probe(struct device *dev) +{ + return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV; +} + +static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba) +{ + int ret = 0; + + if (!hba->wlun_rpmb_clr_ua) + return 0; + ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN); + if (!ret) + hba->wlun_rpmb_clr_ua = 0; + return ret; +} + +static int ufshcd_rpmb_runtime_resume(struct device *dev) +{ + struct ufs_hba *hba = wlun_dev_to_hba(dev); + + if (hba->sdev_rpmb) + return ufshcd_clear_rpmb_uac(hba); + return 0; +} + +static int ufshcd_rpmb_resume(struct device *dev) +{ + struct ufs_hba *hba = wlun_dev_to_hba(dev); + + if (hba->sdev_rpmb && !pm_runtime_suspended(dev)) + return ufshcd_clear_rpmb_uac(hba); + return 0; +} + +static const struct dev_pm_ops ufs_rpmb_pm_ops = { + SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume) +}; + +/** + * Describes the ufs rpmb wlun. + * Used only to send uac. + */ +static struct scsi_driver ufs_rpmb_wlun_template = { + .gendrv = { + .name = "ufs_rpmb_wlun", + .owner = THIS_MODULE, + .probe = ufshcd_rpmb_probe, + .pm = &ufs_rpmb_pm_ops, + }, +}; + /** * ufshcd_add_lus - probe and add UFS logical units * @hba: per-adapter instance @@ -7755,6 +7897,19 @@ static int ufshcd_add_lus(struct ufs_hba *hba) { int ret; + ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv); + if (ret) { + dev_err(hba->dev, "Register device wlun driver failed: %d\n", + ret); + return ret; + } + + ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv); + if (ret) { + dev_err(hba->dev, "Register device wlun driver failed: %d\n", + ret); + return ret; + } /* Add required well known logical units to scsi mid layer */ ret = ufshcd_scsi_add_wlus(hba); if (ret) @@ -7892,6 +8047,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async) ufshcd_set_ufs_dev_active(hba); ufshcd_force_reset_auto_bkops(hba); hba->wlun_dev_clr_ua = true; + hba->wlun_rpmb_clr_ua = true; /* Gear up to HS gear if supported */ if (hba->max_pwr_info.is_valid) { @@ -7964,6 +8120,7 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie) pm_runtime_put_sync(hba->dev); ufshcd_hba_exit(hba); } + hba->init_done = true; } static const struct attribute_group *ufshcd_driver_groups[] = { @@ -8475,7 +8632,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, * handling context. */ hba->host->eh_noresume = 1; - ufshcd_clear_ua_wluns(hba); + if (hba->wlun_dev_clr_ua) + ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN); cmd[4] = pwr_mode << 4; @@ -8650,31 +8808,19 @@ static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba) ufshcd_setup_hba_vreg(hba, true); } -/** - * ufshcd_suspend - helper function for suspend operations - * @hba: per adapter instance - * @pm_op: desired low power operation type - * - * This function will try to put the UFS device and link into low power - * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl" - * (System PM level). - * - * If this function is called during shutdown, it will make sure that - * both UFS device and UFS link is powered off. - * - * NOTE: UFS device & link must be active before we enter in this function. - * - * Returns 0 for success and non-zero for failure - */ -static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) +static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) { int ret = 0; - int check_for_bkops; enum ufs_pm_level pm_lvl; enum ufs_dev_pwr_mode req_dev_pwr_mode; enum uic_link_state req_link_state; - hba->pm_op_in_progress = 1; + /* + * Is invoked when the device wlun is added to sysfs + * But by then hba->sdev_ufs_device may not be initialized. + */ + if (!hba->init_done) + return 0; if (!ufshcd_is_shutdown_pm(pm_op)) { pm_lvl = ufshcd_is_runtime_pm(pm_op) ? hba->rpm_lvl : hba->spm_lvl; @@ -8690,24 +8836,23 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) * just gate the clocks. */ ufshcd_hold(hba, false); - hba->clk_gating.is_suspended = true; if (ufshcd_is_clkscaling_supported(hba)) ufshcd_clk_scaling_suspend(hba, true); if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE && req_link_state == UIC_LINK_ACTIVE_STATE) { - goto disable_clks; + goto enable_scaling; } if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) && (req_link_state == hba->uic_link_state)) - goto enable_gating; + goto enable_scaling; /* UFS device & link must be active before we enter in this function */ if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) { ret = -EINVAL; - goto enable_gating; + goto enable_scaling; } if (ufshcd_is_runtime_pm(pm_op)) { @@ -8719,7 +8864,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) */ ret = ufshcd_urgent_bkops(hba); if (ret) - goto enable_gating; + goto enable_scaling; } else { /* make sure that auto bkops is disabled */ ufshcd_disable_auto_bkops(hba); @@ -8746,10 +8891,206 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) if (!hba->dev_info.b_rpm_dev_flush_capable) { ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode); - if (ret) - goto enable_gating; + if (!ret) + goto out; } } +enable_scaling: + if (ufshcd_is_clkscaling_supported(hba)) + ufshcd_clk_scaling_suspend(hba, false); + + hba->dev_info.b_rpm_dev_flush_capable = false; +out: + if (hba->dev_info.b_rpm_dev_flush_capable) { + schedule_delayed_work(&hba->rpm_dev_flush_recheck_work, + msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS)); + } + if (ret) + ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret); + ufshcd_release(hba); + return ret; +} + +static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) +{ + int ret = 0; + + if (!hba->init_done) + return 0; + + ufshcd_hold(hba, false); + if (ufshcd_is_ufs_dev_deepsleep(hba)) { + /* The device is in DeepSleep but hba was not suspended */ + ret = ufshcd_reset_and_restore(hba); + if (ret) + goto out; + } + + if (!ufshcd_is_ufs_dev_active(hba)) { + ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); + if (ret) + goto out; + } + + if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) + ufshcd_enable_auto_bkops(hba); + else + /* + * If BKOPs operations are urgently needed at this moment then + * keep auto-bkops enabled or else disable it. + */ + ufshcd_urgent_bkops(hba); + + if (hba->clk_scaling.is_allowed) + ufshcd_resume_clkscaling(hba); + + if (hba->dev_info.b_rpm_dev_flush_capable) { + hba->dev_info.b_rpm_dev_flush_capable = false; + cancel_delayed_work(&hba->rpm_dev_flush_recheck_work); + } + +out: + if (ret) + ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret); + ufshcd_release(hba); + return ret; +} + +static int ufshcd_wl_runtime_suspend(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + int ret; + ktime_t start = ktime_get(); + + hba = shost_priv(sdev->host); + + ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM); + if (ret) + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); + + trace_ufshcd_wl_runtime_suspend(dev_name(dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + + return ret; +} + +static int ufshcd_wl_runtime_resume(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + int ret = 0; + ktime_t start = ktime_get(); + + hba = shost_priv(sdev->host); + + ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM); + if (ret) + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); + + trace_ufshcd_wl_runtime_resume(dev_name(dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + + return ret; +} + +static int ufshcd_wl_suspend(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + int ret; + ktime_t start = ktime_get(); + + hba = shost_priv(sdev->host); + ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM); + if (ret) + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); + + trace_ufshcd_wl_suspend(dev_name(dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + + return ret; +} + +static int ufshcd_wl_resume(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + int ret = 0; + ktime_t start = ktime_get(); + + if (pm_runtime_suspended(dev)) + return 0; + hba = shost_priv(sdev->host); + + ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM); + if (ret) + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); + + trace_ufshcd_wl_resume(dev_name(dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + + return ret; +} + +static void ufshcd_wl_shutdown(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + scsi_device_quiesce(sdev); + shost_for_each_device(sdev, hba->host) { + if (sdev == hba->sdev_ufs_device) + continue; + scsi_device_quiesce(sdev); + } + __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM); +} + +/** + * ufshcd_suspend - helper function for suspend operations + * @hba: per adapter instance + * @pm_op: desired low power operation type + * + * This function will try to put the UFS link into low power + * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl" + * (System PM level). + * + * If this function is called during shutdown, it will make sure that + * link is powered off. + * + * Returns 0 for success and non-zero for failure + */ +static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) +{ + int ret = 0; + int check_for_bkops; + enum ufs_pm_level pm_lvl; + enum ufs_dev_pwr_mode req_dev_pwr_mode; + enum uic_link_state req_link_state; + + hba->pm_op_in_progress = 1; + if (!ufshcd_is_shutdown_pm(pm_op)) { + pm_lvl = ufshcd_is_runtime_pm(pm_op) ? + hba->rpm_lvl : hba->spm_lvl; + req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl); + req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl); + } else { + req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE; + req_link_state = UIC_LINK_OFF_STATE; + } + + /* + * If we can't transition into any of the low power modes + * just gate the clocks. + */ + ufshcd_hold(hba, false); + hba->clk_gating.is_suspended = true; /* * In the case of DeepSleep, the device is expected to remain powered @@ -8758,9 +9099,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba); ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops); if (ret) - goto set_dev_active; + goto enable_gating; -disable_clks: /* * Call vendor specific suspend callback. As these callbacks may access * vendor specific host controller register space call them before the @@ -8790,7 +9130,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) goto out; set_link_active: - ufshcd_vreg_set_hpm(hba); /* * Device hardware reset is required to exit DeepSleep. Also, for * DeepSleep, the link is off so host reset and restore will be done @@ -8804,28 +9143,15 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) ufshcd_set_link_active(hba); else if (ufshcd_is_link_off(hba)) ufshcd_host_reset_and_restore(hba); -set_dev_active: /* Can also get here needing to exit DeepSleep */ if (ufshcd_is_ufs_dev_deepsleep(hba)) { ufshcd_device_reset(hba); ufshcd_host_reset_and_restore(hba); } - if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE)) - ufshcd_disable_auto_bkops(hba); enable_gating: - if (ufshcd_is_clkscaling_supported(hba)) - ufshcd_clk_scaling_suspend(hba, false); - hba->clk_gating.is_suspended = false; - hba->dev_info.b_rpm_dev_flush_capable = false; - ufshcd_clear_ua_wluns(hba); ufshcd_release(hba); out: - if (hba->dev_info.b_rpm_dev_flush_capable) { - schedule_delayed_work(&hba->rpm_dev_flush_recheck_work, - msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS)); - } - hba->pm_op_in_progress = 0; if (ret) @@ -8846,10 +9172,8 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) { int ret; - enum uic_link_state old_link_state; hba->pm_op_in_progress = 1; - old_link_state = hba->uic_link_state; ufshcd_hba_vreg_set_hpm(hba); ret = ufshcd_vreg_set_hpm(hba); @@ -8901,43 +9225,14 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) goto vendor_suspend; } - if (!ufshcd_is_ufs_dev_active(hba)) { - ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); - if (ret) - goto set_old_link_state; - } - - if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) - ufshcd_enable_auto_bkops(hba); - else - /* - * If BKOPs operations are urgently needed at this moment then - * keep auto-bkops enabled or else disable it. - */ - ufshcd_urgent_bkops(hba); - - hba->clk_gating.is_suspended = false; - - if (ufshcd_is_clkscaling_supported(hba)) - ufshcd_clk_scaling_suspend(hba, false); - /* Enable Auto-Hibernate if configured */ ufshcd_auto_hibern8_enable(hba); - if (hba->dev_info.b_rpm_dev_flush_capable) { - hba->dev_info.b_rpm_dev_flush_capable = false; - cancel_delayed_work(&hba->rpm_dev_flush_recheck_work); - } - - ufshcd_clear_ua_wluns(hba); - /* Schedule clock gating in case of no access to UFS device yet */ ufshcd_release(hba); goto out; -set_old_link_state: - ufshcd_link_state_transition(hba, old_link_state, 0); vendor_suspend: ufshcd_vops_suspend(hba, pm_op); disable_irq_and_vops_clks: @@ -9170,6 +9465,8 @@ EXPORT_SYMBOL(ufshcd_shutdown); void ufshcd_remove(struct ufs_hba *hba) { ufs_bsg_remove(hba); + scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); + scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv); ufs_sysfs_remove_nodes(hba->dev); blk_cleanup_queue(hba->tmf_queue); blk_mq_free_tag_set(&hba->tmf_tag_set); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index ee61f82..9087593 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -72,6 +72,8 @@ enum ufs_event_type { UFS_EVT_LINK_STARTUP_FAIL, UFS_EVT_RESUME_ERR, UFS_EVT_SUSPEND_ERR, + UFS_EVT_WL_SUSP_ERR, + UFS_EVT_WL_RES_ERR, /* abnormal events */ UFS_EVT_DEV_RESET, @@ -804,6 +806,7 @@ struct ufs_hba { struct list_head clk_list_head; bool wlun_dev_clr_ua; + bool wlun_rpmb_clr_ua; /* Number of requests aborts */ int req_abort_count; @@ -841,6 +844,8 @@ struct ufs_hba { #ifdef CONFIG_DEBUG_FS struct dentry *debugfs_root; #endif + bool init_done; + u32 luns_avail; }; /* Returns true if clocks can be gated. Otherwise false */ diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h index e151477..d9d233b 100644 --- a/include/trace/events/ufs.h +++ b/include/trace/events/ufs.h @@ -246,6 +246,26 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init, int dev_state, int link_state), TP_ARGS(dev_name, err, usecs, dev_state, link_state)); +DEFINE_EVENT(ufshcd_template, ufshcd_wl_suspend, + TP_PROTO(const char *dev_name, int err, s64 usecs, + int dev_state, int link_state), + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); + +DEFINE_EVENT(ufshcd_template, ufshcd_wl_resume, + TP_PROTO(const char *dev_name, int err, s64 usecs, + int dev_state, int link_state), + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); + +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_suspend, + TP_PROTO(const char *dev_name, int err, s64 usecs, + int dev_state, int link_state), + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); + +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_resume, + TP_PROTO(const char *dev_name, int err, s64 usecs, + int dev_state, int link_state), + TP_ARGS(dev_name, err, usecs, dev_state, link_state)); + TRACE_EVENT(ufshcd_command, TP_PROTO(const char *dev_name, enum ufs_trace_str_t str_t, unsigned int tag, u32 doorbell, int transfer_len, u32 intr,