diff mbox series

[v6,6/9] ALSA: virtio: PCM substream operators

Message ID 20210227085956.1700687-7-anton.yakovlev@opensynergy.com (mailing list archive)
State Superseded
Headers show
Series ALSA: add virtio sound driver | expand

Commit Message

Anton Yakovlev Feb. 27, 2021, 8:59 a.m. UTC
Introduce the operators required for the operation of substreams.

Signed-off-by: Anton Yakovlev <anton.yakovlev@opensynergy.com>
---
 sound/virtio/Makefile         |   3 +-
 sound/virtio/virtio_pcm.c     |   2 +
 sound/virtio/virtio_pcm.h     |   4 +
 sound/virtio/virtio_pcm_ops.c | 453 ++++++++++++++++++++++++++++++++++
 4 files changed, 461 insertions(+), 1 deletion(-)
 create mode 100644 sound/virtio/virtio_pcm_ops.c

Comments

Takashi Iwai Feb. 28, 2021, 11:32 a.m. UTC | #1
On Sat, 27 Feb 2021 09:59:53 +0100,
Anton Yakovlev wrote:
> 
> +static int virtsnd_pcm_trigger(struct snd_pcm_substream *substream, int command)
> +{
> +	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
> +	struct virtio_snd *snd = vss->snd;
> +	struct virtio_snd_msg *msg;
> +	unsigned long flags;
> +	int rc;
> +
> +	switch (command) {
> +	case SNDRV_PCM_TRIGGER_START:
> +	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: {
> +		struct virtio_snd_queue *queue = virtsnd_pcm_queue(vss);
> +
> +		spin_lock_irqsave(&queue->lock, flags);
> +		spin_lock(&vss->lock);
> +		rc = virtsnd_pcm_msg_send(vss);
> +		if (!rc)
> +			vss->xfer_enabled = true;
> +		spin_unlock(&vss->lock);
> +		spin_unlock_irqrestore(&queue->lock, flags);
> +		if (rc)
> +			return rc;
> +
> +		msg = virtsnd_pcm_ctl_msg_alloc(vss, VIRTIO_SND_R_PCM_START,
> +						GFP_KERNEL);

If we drop nonatomic PCM, this has to be changed: GFP_KERNEL is no
longer valid in the trigger and the pointer callbacks.
I wonder, though, the code below uses GFP_ATOMIC inconsistently...

> +	case SNDRV_PCM_TRIGGER_STOP:
> +	case SNDRV_PCM_TRIGGER_PAUSE_PUSH: {
> +		spin_lock_irqsave(&vss->lock, flags);
> +		vss->xfer_enabled = false;
> +		spin_unlock_irqrestore(&vss->lock, flags);
> +
> +		/*
> +		 * The substream needs to be released on the device side only
> +		 * when it is completely stopped.
> +		 */
> +		vss->release = (command == SNDRV_PCM_TRIGGER_STOP);
> +
> +		/*
> +		 * The STOP command can be issued in an atomic context after
> +		 * the drain is complete. Therefore, in general, we cannot sleep
> +		 * here.
> +		 */
> +		msg = virtsnd_pcm_ctl_msg_alloc(vss, VIRTIO_SND_R_PCM_STOP,
> +						GFP_ATOMIC);

BTW...
> +	default: {
> +		return -EINVAL;
> +	}

Let's avoid braces inside the switch() unless it's inevitably needed.
It makes the code harder to read.


> +static snd_pcm_uframes_t
> +virtsnd_pcm_pointer(struct snd_pcm_substream *substream)
> +{
> +	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
> +	snd_pcm_uframes_t hw_ptr = SNDRV_PCM_POS_XRUN;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&vss->lock, flags);
> +	if (!vss->xfer_xrun)
> +		hw_ptr = bytes_to_frames(substream->runtime, vss->hw_ptr);
> +	spin_unlock_irqrestore(&vss->lock, flags);

Oh, and if we drop nonatomc PCM, both trigger and pointer callbacks
are guaranteed to be called inside the spinlock, hence you can remove
*_irqsave() but just us spin_lock() in those two callbacks.


thanks,

Takashi
Anton Yakovlev March 1, 2021, 9:29 a.m. UTC | #2
On 28.02.2021 12:32, Takashi Iwai wrote:
> On Sat, 27 Feb 2021 09:59:53 +0100,
> Anton Yakovlev wrote:
>>


[snip]


>> +static snd_pcm_uframes_t
>> +virtsnd_pcm_pointer(struct snd_pcm_substream *substream)
>> +{
>> +     struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
>> +     snd_pcm_uframes_t hw_ptr = SNDRV_PCM_POS_XRUN;
>> +     unsigned long flags;
>> +
>> +     spin_lock_irqsave(&vss->lock, flags);
>> +     if (!vss->xfer_xrun)
>> +             hw_ptr = bytes_to_frames(substream->runtime, vss->hw_ptr);
>> +     spin_unlock_irqrestore(&vss->lock, flags);
> 
> Oh, and if we drop nonatomc PCM, both trigger and pointer callbacks
> are guaranteed to be called inside the spinlock, hence you can remove
> *_irqsave() but just us spin_lock() in those two callbacks.

As I understand, spin_lock_irqsave() disables only local interrupts. But
what about other CPU cores?


> 
> thanks,
> 
> Takashi
>
Takashi Iwai March 1, 2021, 1:33 p.m. UTC | #3
On Mon, 01 Mar 2021 10:29:24 +0100,
Anton Yakovlev wrote:
> 
> On 28.02.2021 12:32, Takashi Iwai wrote:
> > On Sat, 27 Feb 2021 09:59:53 +0100,
> > Anton Yakovlev wrote:
> >>
> 
> 
> [snip]
> 
> 
> >> +static snd_pcm_uframes_t
> >> +virtsnd_pcm_pointer(struct snd_pcm_substream *substream)
> >> +{
> >> +     struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
> >> +     snd_pcm_uframes_t hw_ptr = SNDRV_PCM_POS_XRUN;
> >> +     unsigned long flags;
> >> +
> >> +     spin_lock_irqsave(&vss->lock, flags);
> >> +     if (!vss->xfer_xrun)
> >> +             hw_ptr = bytes_to_frames(substream->runtime, vss->hw_ptr);
> >> +     spin_unlock_irqrestore(&vss->lock, flags);
> >
> > Oh, and if we drop nonatomc PCM, both trigger and pointer callbacks
> > are guaranteed to be called inside the spinlock, hence you can remove
> > *_irqsave() but just us spin_lock() in those two callbacks.
> 
> As I understand, spin_lock_irqsave() disables only local interrupts. But
> what about other CPU cores?

Those are already under spin_lock_irqsave() of the PCM substream
lock (in the case of normal PCM operation without nonatomic flag).


Takashi
diff mbox series

Patch

diff --git a/sound/virtio/Makefile b/sound/virtio/Makefile
index 626af3cc3ed7..34493226793f 100644
--- a/sound/virtio/Makefile
+++ b/sound/virtio/Makefile
@@ -6,5 +6,6 @@  virtio_snd-objs := \
 	virtio_card.o \
 	virtio_ctl_msg.o \
 	virtio_pcm.o \
-	virtio_pcm_msg.o
+	virtio_pcm_msg.o \
+	virtio_pcm_ops.o
 
diff --git a/sound/virtio/virtio_pcm.c b/sound/virtio/virtio_pcm.c
index 3cfd3520a9c0..3605151860f2 100644
--- a/sound/virtio/virtio_pcm.c
+++ b/sound/virtio/virtio_pcm.c
@@ -454,6 +454,8 @@  int virtsnd_pcm_build_devs(struct virtio_snd *snd)
 
 			for (kss = ks->substream; kss; kss = kss->next)
 				vs->substreams[kss->number]->substream = kss;
+
+			snd_pcm_set_ops(vpcm->pcm, i, &virtsnd_pcm_ops);
 		}
 
 		snd_pcm_set_managed_buffer_all(vpcm->pcm,
diff --git a/sound/virtio/virtio_pcm.h b/sound/virtio/virtio_pcm.h
index 7af41cad4e8f..55dfb19d14b3 100644
--- a/sound/virtio/virtio_pcm.h
+++ b/sound/virtio/virtio_pcm.h
@@ -28,6 +28,7 @@  struct virtio_pcm_msg;
  * @hw_ptr: Substream hardware pointer value in bytes [0 ... buffer_bytes).
  * @xfer_enabled: Data transfer state (0 - off, 1 - on).
  * @xfer_xrun: Data underflow/overflow state (0 - no xrun, 1 - xrun).
+ * @release: True if the substream must be released on the device side.
  * @msgs: Allocated I/O messages.
  * @nmsgs: Number of allocated I/O messages.
  * @msg_last_enqueued: Index of the last I/O message added to the virtqueue.
@@ -47,6 +48,7 @@  struct virtio_pcm_substream {
 	size_t hw_ptr;
 	bool xfer_enabled;
 	bool xfer_xrun;
+	bool release;
 	struct virtio_pcm_msg **msgs;
 	unsigned int nmsgs;
 	int msg_last_enqueued;
@@ -78,6 +80,8 @@  struct virtio_pcm {
 	struct virtio_pcm_stream streams[SNDRV_PCM_STREAM_LAST + 1];
 };
 
+extern const struct snd_pcm_ops virtsnd_pcm_ops;
+
 int virtsnd_pcm_validate(struct virtio_device *vdev);
 
 int virtsnd_pcm_parse_cfg(struct virtio_snd *snd);
diff --git a/sound/virtio/virtio_pcm_ops.c b/sound/virtio/virtio_pcm_ops.c
new file mode 100644
index 000000000000..d02d79bd94f3
--- /dev/null
+++ b/sound/virtio/virtio_pcm_ops.c
@@ -0,0 +1,453 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * virtio-snd: Virtio sound device
+ * Copyright (C) 2021 OpenSynergy GmbH
+ */
+#include <sound/pcm_params.h>
+
+#include "virtio_card.h"
+
+/*
+ * I/O messages lifetime
+ * ---------------------
+ *
+ * Allocation:
+ *   Messages are initially allocated in the ops->hw_params() after the size and
+ *   number of periods have been successfully negotiated.
+ *
+ * Freeing:
+ *   Messages can be safely freed after the queue has been successfully flushed
+ *   (RELEASE command in the ops->sync_stop()) and the ops->hw_free() has been
+ *   called.
+ *
+ *   When the substream stops, the ops->sync_stop() waits until the device has
+ *   completed all pending messages. This wait can be interrupted either by a
+ *   signal or due to a timeout. In this case, the device can still access
+ *   messages even after calling ops->hw_free(). It can also issue an interrupt,
+ *   and the interrupt handler will also try to access message structures.
+ *
+ *   Therefore, freeing of already allocated messages occurs:
+ *
+ *   - in ops->hw_params(), if this operator was called several times in a row,
+ *     or if ops->hw_free() failed to free messages previously;
+ *
+ *   - in ops->hw_free(), if the queue has been successfully flushed;
+ *
+ *   - in dev->release().
+ */
+
+/* Map for converting ALSA format to VirtIO format. */
+struct virtsnd_a2v_format {
+	snd_pcm_format_t alsa_bit;
+	unsigned int vio_bit;
+};
+
+static const struct virtsnd_a2v_format g_a2v_format_map[] = {
+	{ SNDRV_PCM_FORMAT_IMA_ADPCM, VIRTIO_SND_PCM_FMT_IMA_ADPCM },
+	{ SNDRV_PCM_FORMAT_MU_LAW, VIRTIO_SND_PCM_FMT_MU_LAW },
+	{ SNDRV_PCM_FORMAT_A_LAW, VIRTIO_SND_PCM_FMT_A_LAW },
+	{ SNDRV_PCM_FORMAT_S8, VIRTIO_SND_PCM_FMT_S8 },
+	{ SNDRV_PCM_FORMAT_U8, VIRTIO_SND_PCM_FMT_U8 },
+	{ SNDRV_PCM_FORMAT_S16_LE, VIRTIO_SND_PCM_FMT_S16 },
+	{ SNDRV_PCM_FORMAT_U16_LE, VIRTIO_SND_PCM_FMT_U16 },
+	{ SNDRV_PCM_FORMAT_S18_3LE, VIRTIO_SND_PCM_FMT_S18_3 },
+	{ SNDRV_PCM_FORMAT_U18_3LE, VIRTIO_SND_PCM_FMT_U18_3 },
+	{ SNDRV_PCM_FORMAT_S20_3LE, VIRTIO_SND_PCM_FMT_S20_3 },
+	{ SNDRV_PCM_FORMAT_U20_3LE, VIRTIO_SND_PCM_FMT_U20_3 },
+	{ SNDRV_PCM_FORMAT_S24_3LE, VIRTIO_SND_PCM_FMT_S24_3 },
+	{ SNDRV_PCM_FORMAT_U24_3LE, VIRTIO_SND_PCM_FMT_U24_3 },
+	{ SNDRV_PCM_FORMAT_S20_LE, VIRTIO_SND_PCM_FMT_S20 },
+	{ SNDRV_PCM_FORMAT_U20_LE, VIRTIO_SND_PCM_FMT_U20 },
+	{ SNDRV_PCM_FORMAT_S24_LE, VIRTIO_SND_PCM_FMT_S24 },
+	{ SNDRV_PCM_FORMAT_U24_LE, VIRTIO_SND_PCM_FMT_U24 },
+	{ SNDRV_PCM_FORMAT_S32_LE, VIRTIO_SND_PCM_FMT_S32 },
+	{ SNDRV_PCM_FORMAT_U32_LE, VIRTIO_SND_PCM_FMT_U32 },
+	{ SNDRV_PCM_FORMAT_FLOAT_LE, VIRTIO_SND_PCM_FMT_FLOAT },
+	{ SNDRV_PCM_FORMAT_FLOAT64_LE, VIRTIO_SND_PCM_FMT_FLOAT64 },
+	{ SNDRV_PCM_FORMAT_DSD_U8, VIRTIO_SND_PCM_FMT_DSD_U8 },
+	{ SNDRV_PCM_FORMAT_DSD_U16_LE, VIRTIO_SND_PCM_FMT_DSD_U16 },
+	{ SNDRV_PCM_FORMAT_DSD_U32_LE, VIRTIO_SND_PCM_FMT_DSD_U32 },
+	{ SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE,
+	  VIRTIO_SND_PCM_FMT_IEC958_SUBFRAME }
+};
+
+/* Map for converting ALSA frame rate to VirtIO frame rate. */
+struct virtsnd_a2v_rate {
+	unsigned int rate;
+	unsigned int vio_bit;
+};
+
+static const struct virtsnd_a2v_rate g_a2v_rate_map[] = {
+	{ 5512, VIRTIO_SND_PCM_RATE_5512 },
+	{ 8000, VIRTIO_SND_PCM_RATE_8000 },
+	{ 11025, VIRTIO_SND_PCM_RATE_11025 },
+	{ 16000, VIRTIO_SND_PCM_RATE_16000 },
+	{ 22050, VIRTIO_SND_PCM_RATE_22050 },
+	{ 32000, VIRTIO_SND_PCM_RATE_32000 },
+	{ 44100, VIRTIO_SND_PCM_RATE_44100 },
+	{ 48000, VIRTIO_SND_PCM_RATE_48000 },
+	{ 64000, VIRTIO_SND_PCM_RATE_64000 },
+	{ 88200, VIRTIO_SND_PCM_RATE_88200 },
+	{ 96000, VIRTIO_SND_PCM_RATE_96000 },
+	{ 176400, VIRTIO_SND_PCM_RATE_176400 },
+	{ 192000, VIRTIO_SND_PCM_RATE_192000 }
+};
+
+static int virtsnd_pcm_sync_stop(struct snd_pcm_substream *substream);
+
+/**
+ * virtsnd_pcm_open() - Open the PCM substream.
+ * @substream: Kernel ALSA substream.
+ *
+ * Context: Process context.
+ * Return: 0 on success, -errno on failure.
+ */
+static int virtsnd_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct virtio_pcm *vpcm = snd_pcm_substream_chip(substream);
+	struct virtio_pcm_stream *vs = &vpcm->streams[substream->stream];
+	struct virtio_pcm_substream *vss = vs->substreams[substream->number];
+
+	substream->runtime->hw = vss->hw;
+	substream->private_data = vss;
+
+	snd_pcm_hw_constraint_integer(substream->runtime,
+				      SNDRV_PCM_HW_PARAM_PERIODS);
+
+	/*
+	 * If the substream has already been used, then the I/O queue may be in
+	 * an invalid state. Just in case, we do a check and try to return the
+	 * queue to its original state, if necessary.
+	 */
+	vss->release = !!virtsnd_pcm_msg_pending_num(vss);
+
+	return virtsnd_pcm_sync_stop(substream);
+}
+
+/**
+ * virtsnd_pcm_close() - Close the PCM substream.
+ * @substream: Kernel ALSA substream.
+ *
+ * Context: Process context.
+ * Return: 0.
+ */
+static int virtsnd_pcm_close(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+/**
+ * virtsnd_pcm_hw_params() - Set the parameters of the PCM substream.
+ * @substream: Kernel ALSA substream.
+ * @hw_params: Hardware parameters (can be NULL).
+ *
+ * The function can be called both from the upper level (in this case,
+ * @hw_params is not NULL) or from the driver itself (in this case, @hw_params
+ * is NULL, and the parameter values are taken from the runtime structure).
+ *
+ * Context: Process context.
+ * Return: 0 on success, -errno on failure.
+ */
+static int virtsnd_pcm_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *hw_params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
+	struct virtio_device *vdev = vss->snd->vdev;
+	struct virtio_snd_msg *msg;
+	struct virtio_snd_pcm_set_params *request;
+	snd_pcm_format_t format;
+	unsigned int channels;
+	unsigned int rate;
+	unsigned int buffer_bytes;
+	unsigned int period_bytes;
+	unsigned int periods;
+	unsigned int i;
+	int vformat = -1;
+	int vrate = -1;
+	int rc;
+
+	if (virtsnd_pcm_msg_pending_num(vss)) {
+		dev_err(&vdev->dev, "SID %u: invalid I/O queue state\n",
+			vss->sid);
+		return -EBADFD;
+	}
+
+	/* Set hardware parameters in device */
+	if (hw_params) {
+		format = params_format(hw_params);
+		channels = params_channels(hw_params);
+		rate = params_rate(hw_params);
+		buffer_bytes = params_buffer_bytes(hw_params);
+		period_bytes = params_period_bytes(hw_params);
+		periods = params_periods(hw_params);
+	} else {
+		format = runtime->format;
+		channels = runtime->channels;
+		rate = runtime->rate;
+		buffer_bytes = frames_to_bytes(runtime, runtime->buffer_size);
+		period_bytes = frames_to_bytes(runtime, runtime->period_size);
+		periods = runtime->periods;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(g_a2v_format_map); ++i)
+		if (g_a2v_format_map[i].alsa_bit == format) {
+			vformat = g_a2v_format_map[i].vio_bit;
+
+			break;
+		}
+
+	for (i = 0; i < ARRAY_SIZE(g_a2v_rate_map); ++i)
+		if (g_a2v_rate_map[i].rate == rate) {
+			vrate = g_a2v_rate_map[i].vio_bit;
+
+			break;
+		}
+
+	if (vformat == -1 || vrate == -1)
+		return -EINVAL;
+
+	msg = virtsnd_pcm_ctl_msg_alloc(vss, VIRTIO_SND_R_PCM_SET_PARAMS,
+					GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	request = virtsnd_ctl_msg_request(msg);
+	request->buffer_bytes = cpu_to_le32(buffer_bytes);
+	request->period_bytes = cpu_to_le32(period_bytes);
+	request->channels = channels;
+	request->format = vformat;
+	request->rate = vrate;
+
+	if (vss->features & (1U << VIRTIO_SND_PCM_F_MSG_POLLING))
+		request->features |=
+			cpu_to_le32(1U << VIRTIO_SND_PCM_F_MSG_POLLING);
+
+	if (vss->features & (1U << VIRTIO_SND_PCM_F_EVT_XRUNS))
+		request->features |=
+			cpu_to_le32(1U << VIRTIO_SND_PCM_F_EVT_XRUNS);
+
+	rc = virtsnd_ctl_msg_send_sync(vss->snd, msg);
+	if (rc)
+		return rc;
+
+	/* Free previously allocated messages (if any). */
+	virtsnd_pcm_msg_free(vss);
+
+	return virtsnd_pcm_msg_alloc(vss, periods, period_bytes);
+}
+
+/**
+ * virtsnd_pcm_hw_free() - Reset the parameters of the PCM substream.
+ * @substream: Kernel ALSA substream.
+ *
+ * Context: Process context.
+ * Return: 0
+ */
+static int virtsnd_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
+
+	/* If the queue is flushed, we can safely free the messages here. */
+	if (!virtsnd_pcm_msg_pending_num(vss))
+		virtsnd_pcm_msg_free(vss);
+
+	return 0;
+}
+
+/**
+ * virtsnd_pcm_prepare() - Prepare the PCM substream.
+ * @substream: Kernel ALSA substream.
+ *
+ * The function can be called both from the upper level or from the driver
+ * itself.
+ *
+ * Context: Process context.
+ * Return: 0 on success, -errno on failure.
+ */
+static int virtsnd_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
+	struct virtio_device *vdev = vss->snd->vdev;
+	struct virtio_snd_msg *msg;
+
+	if (virtsnd_pcm_msg_pending_num(vss)) {
+		dev_err(&vdev->dev, "SID %u: invalid I/O queue state\n",
+			vss->sid);
+		return -EBADFD;
+	}
+
+	vss->buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
+	vss->hw_ptr = 0;
+	vss->xfer_xrun = false;
+	vss->msg_last_enqueued = -1;
+	vss->msg_count = 0;
+
+	msg = virtsnd_pcm_ctl_msg_alloc(vss, VIRTIO_SND_R_PCM_PREPARE,
+					GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	return virtsnd_ctl_msg_send_sync(vss->snd, msg);
+}
+
+/**
+ * virtsnd_pcm_trigger() - Process command for the PCM substream.
+ * @substream: Kernel ALSA substream.
+ * @command: Substream command (SNDRV_PCM_TRIGGER_XXX).
+ *
+ * Context: Any context. Takes and releases the VirtIO substream spinlock.
+ *          May take and release the tx/rx queue spinlock.
+ * Return: 0 on success, -errno on failure.
+ */
+static int virtsnd_pcm_trigger(struct snd_pcm_substream *substream, int command)
+{
+	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
+	struct virtio_snd *snd = vss->snd;
+	struct virtio_snd_msg *msg;
+	unsigned long flags;
+	int rc;
+
+	switch (command) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: {
+		struct virtio_snd_queue *queue = virtsnd_pcm_queue(vss);
+
+		spin_lock_irqsave(&queue->lock, flags);
+		spin_lock(&vss->lock);
+		rc = virtsnd_pcm_msg_send(vss);
+		if (!rc)
+			vss->xfer_enabled = true;
+		spin_unlock(&vss->lock);
+		spin_unlock_irqrestore(&queue->lock, flags);
+		if (rc)
+			return rc;
+
+		msg = virtsnd_pcm_ctl_msg_alloc(vss, VIRTIO_SND_R_PCM_START,
+						GFP_KERNEL);
+		if (!msg) {
+			spin_lock_irqsave(&vss->lock, flags);
+			vss->xfer_enabled = false;
+			spin_unlock_irqrestore(&vss->lock, flags);
+
+			return -ENOMEM;
+		}
+
+		return virtsnd_ctl_msg_send_sync(snd, msg);
+	}
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH: {
+		spin_lock_irqsave(&vss->lock, flags);
+		vss->xfer_enabled = false;
+		spin_unlock_irqrestore(&vss->lock, flags);
+
+		/*
+		 * The substream needs to be released on the device side only
+		 * when it is completely stopped.
+		 */
+		vss->release = (command == SNDRV_PCM_TRIGGER_STOP);
+
+		/*
+		 * The STOP command can be issued in an atomic context after
+		 * the drain is complete. Therefore, in general, we cannot sleep
+		 * here.
+		 */
+		msg = virtsnd_pcm_ctl_msg_alloc(vss, VIRTIO_SND_R_PCM_STOP,
+						GFP_ATOMIC);
+		if (!msg)
+			return -ENOMEM;
+
+		return virtsnd_ctl_msg_send_async(snd, msg);
+	}
+	default: {
+		return -EINVAL;
+	}
+	}
+}
+
+/**
+ * virtsnd_pcm_sync_stop() - Synchronous PCM substream stop.
+ * @substream: Kernel ALSA substream.
+ *
+ * The function can be called both from the upper level or from the driver
+ * itself.
+ *
+ * Context: Process context. Takes and releases the VirtIO substream spinlock.
+ * Return: 0 on success, -errno on failure.
+ */
+static int virtsnd_pcm_sync_stop(struct snd_pcm_substream *substream)
+{
+	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
+	struct virtio_snd *snd = vss->snd;
+	struct virtio_snd_msg *msg;
+	unsigned int js = msecs_to_jiffies(msg_timeout_ms);
+	int rc;
+
+	if (!vss->release)
+		return 0;
+
+	msg = virtsnd_pcm_ctl_msg_alloc(vss, VIRTIO_SND_R_PCM_RELEASE,
+					GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	rc = virtsnd_ctl_msg_send_sync(snd, msg);
+	if (rc)
+		return rc;
+
+	/*
+	 * The spec states that upon receipt of the RELEASE command "the device
+	 * MUST complete all pending I/O messages for the specified stream ID".
+	 * Thus, we consider the absence of I/O messages in the queue as an
+	 * indication that the substream has been released.
+	 */
+	rc = wait_event_interruptible_timeout(vss->msg_empty,
+					      !virtsnd_pcm_msg_pending_num(vss),
+					      js);
+	if (rc <= 0) {
+		dev_warn(&snd->vdev->dev, "SID %u: failed to flush I/O queue\n",
+			 vss->sid);
+
+		return !rc ? -ETIMEDOUT : rc;
+	}
+
+	vss->release = false;
+
+	return 0;
+}
+
+/**
+ * virtsnd_pcm_pointer() - Get the current hardware position for the PCM
+ *                         substream.
+ * @substream: Kernel ALSA substream.
+ *
+ * Context: Any context. Takes and releases the VirtIO substream spinlock.
+ * Return: Hardware position in frames inside [0 ... buffer_size) range.
+ */
+static snd_pcm_uframes_t
+virtsnd_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct virtio_pcm_substream *vss = snd_pcm_substream_chip(substream);
+	snd_pcm_uframes_t hw_ptr = SNDRV_PCM_POS_XRUN;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vss->lock, flags);
+	if (!vss->xfer_xrun)
+		hw_ptr = bytes_to_frames(substream->runtime, vss->hw_ptr);
+	spin_unlock_irqrestore(&vss->lock, flags);
+
+	return hw_ptr;
+}
+
+/* PCM substream operators map. */
+const struct snd_pcm_ops virtsnd_pcm_ops = {
+	.open = virtsnd_pcm_open,
+	.close = virtsnd_pcm_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = virtsnd_pcm_hw_params,
+	.hw_free = virtsnd_pcm_hw_free,
+	.prepare = virtsnd_pcm_prepare,
+	.trigger = virtsnd_pcm_trigger,
+	.sync_stop = virtsnd_pcm_sync_stop,
+	.pointer = virtsnd_pcm_pointer,
+};