diff mbox series

[mellanox-tree] net/mlx5: prevent an integer underflow in mlx5_perout_configure()

Message ID YC+LoAcvcQSWLLKX@mwanda (mailing list archive)
State Awaiting Upstream
Delegated to: Netdev Maintainers
Headers show
Series [mellanox-tree] net/mlx5: prevent an integer underflow in mlx5_perout_configure() | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Guessed tree name to be net-next
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cc_maintainers warning 2 maintainers not CCed: davem@davemloft.net kuba@kernel.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 8 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Dan Carpenter Feb. 19, 2021, 9:57 a.m. UTC
The value of "sec" comes from the user.  Negative values will lead to
shift wrapping inside the perout_conf_real_time() function and triggger
a UBSan warning.

Add a check and return -EINVAL to prevent that from happening.

Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
Saeed, I think this goes through your git tree and you will send a pull
request to the networking?

>From static analysis.  Not tested.

 drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Leon Romanovsky Feb. 21, 2021, 6:11 a.m. UTC | #1
On Fri, Feb 19, 2021 at 12:57:52PM +0300, Dan Carpenter wrote:
> The value of "sec" comes from the user.  Negative values will lead to
> shift wrapping inside the perout_conf_real_time() function and triggger
> a UBSan warning.
>
> Add a check and return -EINVAL to prevent that from happening.
>
> Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
> Saeed, I think this goes through your git tree and you will send a pull
> request to the networking?
>
> From static analysis.  Not tested.
>
>  drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>

Thanks,
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Eran Ben Elisha March 1, 2021, 10:12 a.m. UTC | #2
On 2/19/2021 11:57 AM, Dan Carpenter wrote:
> The value of "sec" comes from the user.  Negative values will lead to
> shift wrapping inside the perout_conf_real_time() function and triggger
> a UBSan warning.
> 
> Add a check and return -EINVAL to prevent that from happening.
> 
> Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
> Saeed, I think this goes through your git tree and you will send a pull
> request to the networking?
> 
>  From static analysis.  Not tested.
> 
>   drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
> index b0e129d0f6d8..286824ca62b5 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
> @@ -516,7 +516,7 @@ static int mlx5_perout_configure(struct ptp_clock_info *ptp,
>   		nsec = rq->perout.start.nsec;
>   		sec = rq->perout.start.sec;
>   
> -		if (rt_mode && sec > U32_MAX)

This if clause was set to reject perout time start sec bigger than 
U32_MAX, as rt mode specifically doesn't support it.

A user negative values protection should be generic for all netdev 
drivers, inside the caller ioctl func, and not part of any driver code.

> +		if (rt_mode && (sec < 0 || sec > U32_MAX))
>   			return -EINVAL;
>   
>   		time_stamp = rt_mode ? perout_conf_real_time(sec, nsec) :
>
Dan Carpenter March 1, 2021, 10:36 a.m. UTC | #3
On Mon, Mar 01, 2021 at 12:12:34PM +0200, Eran Ben Elisha wrote:
> 
> 
> On 2/19/2021 11:57 AM, Dan Carpenter wrote:
> > The value of "sec" comes from the user.  Negative values will lead to
> > shift wrapping inside the perout_conf_real_time() function and triggger
> > a UBSan warning.
> > 
> > Add a check and return -EINVAL to prevent that from happening.
> > 
> > Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support")
> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> > ---
> > Saeed, I think this goes through your git tree and you will send a pull
> > request to the networking?
> > 
> >  From static analysis.  Not tested.
> > 
> >   drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
> > index b0e129d0f6d8..286824ca62b5 100644
> > --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
> > +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
> > @@ -516,7 +516,7 @@ static int mlx5_perout_configure(struct ptp_clock_info *ptp,
> >   		nsec = rq->perout.start.nsec;
> >   		sec = rq->perout.start.sec;
> > -		if (rt_mode && sec > U32_MAX)
> 
> This if clause was set to reject perout time start sec bigger than U32_MAX,
> as rt mode specifically doesn't support it.
> 
> A user negative values protection should be generic for all netdev drivers,
> inside the caller ioctl func, and not part of any driver code.
> 

I'm not a networking expert...  :/  It's easier for me to see that this
code will trigger a syzbot splat vs saying that there is no valid use
case for negative seconds any driver.

What you're saying sounds reasonable enough to me, but I don't know
enough about networking to comment one way or the other.  Maybe the
other drivers have a use for negative seconds?

regards,
dan carpenter

> > +		if (rt_mode && (sec < 0 || sec > U32_MAX))
> >   			return -EINVAL;
> >   		time_stamp = rt_mode ? perout_conf_real_time(sec, nsec) :
> >
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
index b0e129d0f6d8..286824ca62b5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c
@@ -516,7 +516,7 @@  static int mlx5_perout_configure(struct ptp_clock_info *ptp,
 		nsec = rq->perout.start.nsec;
 		sec = rq->perout.start.sec;
 
-		if (rt_mode && sec > U32_MAX)
+		if (rt_mode && (sec < 0 || sec > U32_MAX))
 			return -EINVAL;
 
 		time_stamp = rt_mode ? perout_conf_real_time(sec, nsec) :