new file mode 100644
@@ -0,0 +1,42 @@
+/*
+ * ARM SSE (Subsystems for Embedded): IoTKit, SSE-200
+ *
+ * Copyright (c) 2020 Linaro Limited
+ * Written by Peter Maydell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 or
+ * (at your option) any later version.
+ */
+
+#ifndef ARMSSE_VERSION_H
+#define ARMSSE_VERSION_H
+
+
+/*
+ * Define an enumeration of the possible values of the sse-version
+ * property implemented by various sub-devices of the SSE, and
+ * a validation function that checks that a valid value has been passed.
+ * These are arbitrary QEMU-internal values (nobody should be creating
+ * the sub-devices of the SSE except for the SSE object itself), but
+ * we pick obvious numbers for the benefit of people debugging with gdb.
+ */
+enum {
+ ARMSSE_IOTKIT = 0,
+ ARMSSE_SSE200 = 200,
+ ARMSSE_SSE300 = 300,
+};
+
+static inline bool armsse_version_valid(uint32_t sse_version)
+{
+ switch (sse_version) {
+ case ARMSSE_IOTKIT:
+ case ARMSSE_SSE200:
+ case ARMSSE_SSE300:
+ return true;
+ default:
+ return false;
+ }
+}
+
+#endif
@@ -17,9 +17,8 @@
* "system control register" blocks.
*
* QEMU interface:
- * + QOM property "SYS_VERSION": value of the SYS_VERSION register of the
- * system information block of the SSE
- * (used to identify whether to provide SSE-200-only registers)
+ * + QOM property "sse-version": indicates which SSE version this is part of
+ * (used to identify whether to provide SSE-200-only registers, etc)
* + sysbus MMIO region 0: the system information register bank
* + sysbus MMIO region 1: the system control register bank
*/
@@ -61,7 +60,7 @@ struct IoTKitSysCtl {
uint32_t pdcm_pd_sram3_sense;
/* Properties */
- uint32_t sys_version;
+ uint32_t sse_version;
uint32_t cpuwait_rst;
uint32_t initsvtor0_rst;
uint32_t initsvtor1_rst;
@@ -19,6 +19,7 @@
#include "migration/vmstate.h"
#include "hw/registerfields.h"
#include "hw/arm/armsse.h"
+#include "hw/arm/armsse-version.h"
#include "hw/arm/boot.h"
#include "hw/irq.h"
#include "hw/qdev-clock.h"
@@ -31,6 +32,7 @@ typedef enum SysConfigFormat {
struct ARMSSEInfo {
const char *name;
+ uint32_t sse_version;
int sram_banks;
int num_cpus;
uint32_t sys_version;
@@ -71,6 +73,7 @@ static Property armsse_properties[] = {
static const ARMSSEInfo armsse_variants[] = {
{
.name = TYPE_IOTKIT,
+ .sse_version = ARMSSE_IOTKIT,
.sram_banks = 1,
.num_cpus = 1,
.sys_version = 0x41743,
@@ -85,6 +88,7 @@ static const ARMSSEInfo armsse_variants[] = {
},
{
.name = TYPE_SSE200,
+ .sse_version = ARMSSE_SSE200,
.sram_banks = 4,
.num_cpus = 2,
.sys_version = 0x22041743,
@@ -951,8 +955,8 @@ static void armsse_realize(DeviceState *dev, Error **errp)
/* System information registers */
sysbus_mmio_map(SYS_BUS_DEVICE(&s->sysinfo), 0, 0x40020000);
/* System control registers */
- object_property_set_int(OBJECT(&s->sysctl), "SYS_VERSION",
- info->sys_version, &error_abort);
+ object_property_set_int(OBJECT(&s->sysctl), "sse-version",
+ info->sse_version, &error_abort);
object_property_set_int(OBJECT(&s->sysctl), "CPUWAIT_RST",
info->cpuwait_rst, &error_abort);
object_property_set_int(OBJECT(&s->sysctl), "INITSVTOR0_RST",
@@ -28,6 +28,7 @@
#include "hw/registerfields.h"
#include "hw/misc/iotkit-sysctl.h"
#include "hw/qdev-properties.h"
+#include "hw/arm/armsse-version.h"
#include "target/arm/arm-powerctl.h"
#include "target/arm/cpu.h"
@@ -438,10 +439,12 @@ static void iotkit_sysctl_realize(DeviceState *dev, Error **errp)
{
IoTKitSysCtl *s = IOTKIT_SYSCTL(dev);
- /* The top 4 bits of the SYS_VERSION register tell us if we're an SSE-200 */
- if (extract32(s->sys_version, 28, 4) == 2) {
- s->is_sse200 = true;
+ if (!armsse_version_valid(s->sse_version)) {
+ error_setg(errp, "invalid sse-version value %d", s->sse_version);
+ return;
}
+
+ s->is_sse200 = s->sse_version == ARMSSE_SSE200;
}
static bool sse200_needed(void *opaque)
@@ -493,7 +496,7 @@ static const VMStateDescription iotkit_sysctl_vmstate = {
};
static Property iotkit_sysctl_props[] = {
- DEFINE_PROP_UINT32("SYS_VERSION", IoTKitSysCtl, sys_version, 0),
+ DEFINE_PROP_UINT32("sse-version", IoTKitSysCtl, sse_version, 0),
DEFINE_PROP_UINT32("CPUWAIT_RST", IoTKitSysCtl, cpuwait_rst, 0),
DEFINE_PROP_UINT32("INITSVTOR0_RST", IoTKitSysCtl, initsvtor0_rst,
0x10000000),
We model Arm "Subsystems for Embedded" SoC subsystems using generic code which is split into various sub-devices which are configurable by QOM properties to handle the behaviour differences between the SSE subsystems we implement. Currently the only sub-device which needs to change is the IOTKIT_SYSCTL device, and we do this with a mix of properties that directly specify divergent behaviours (eg CPUWAIT_RST) and passing it the SYS_VERSION register value as a way for it to distinguish IoTKit from SSE-200. The "pass SYS_VERSION" approach is already a bit hacky, since the IOTKIT_SYSCTL device has to know that the different part of the register value happens to be bits [31:28]. For SSE-300 this register is renamed SOC_IDENTITY and has a different format entirely, all of whose fields can be configured by the SoC integrator when they integrate the SSE into their SoC, and so "pass SYS_VERSION" breaks down completely. Switch to using a simple integer property representing an internal-to-QEMU enumeration of the SSE flavour. For the moment we only need this in IOTKIT_SYSCTL, but as we add SSE-300 support a few of the other devices will also need to know. We define and permit a value for the SSE-300 so we can start using it in subsequent commits which add SSE-300 support. The now-redundant is_sse200 flag in IoTKitSysCtl will be removed in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- I didn't use a full-on qdev/QOM 'enum' property here because that requires messing with the QAPI schema, which seems like overkill for this entirely-internal-to-the-implementation bit of information passing. --- include/hw/arm/armsse-version.h | 42 +++++++++++++++++++++++++++++++++ include/hw/misc/iotkit-sysctl.h | 7 +++--- hw/arm/armsse.c | 8 +++++-- hw/misc/iotkit-sysctl.c | 11 +++++---- 4 files changed, 58 insertions(+), 10 deletions(-) create mode 100644 include/hw/arm/armsse-version.h