Message ID | 20210212095336.635701-1-daniel@zonque.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2,1/2] dt-bindings: display: add bindings for newhaven, 1.8-128160EF | expand |
On Fri, Feb 12, 2021 at 10:53:35AM +0100, Daniel Mack wrote: > This adds documentation for a new ILI9163 based, SPI connected display. > > Signed-off-by: Daniel Mack <daniel@zonque.org> > --- > .../bindings/display/ilitek,ili9163.txt | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9163.txt Bindings are in schema format now. > > diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9163.txt b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt > new file mode 100644 > index 0000000000000..fee119991c14e > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt > @@ -0,0 +1,27 @@ > +Ilitek ILI9163 display panels > + > +This binding is for display panels using an Ilitek ILI9163 controller in SPI > +mode. > + > +Required properties: > +- compatible: "newhaven,1.8-128160EF", "ilitek,ili9163" > +- dc-gpios: D/C pin > +- reset-gpios: Reset pin > + > +The node for this driver must be a child node of a SPI controller, hence > +all mandatory properties described in ../spi/spi-bus.txt must be specified. > + > +Optional properties: > +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) > +- backlight: phandle of the backlight device attached to the panel > + > +Example: > + display@0{ > + compatible = "newhaven,1.8-128160EF", "ilitek,ili9163" > + reg = <0>; > + spi-max-frequency = <32000000>; > + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; > + rotation = <270>; > + backlight = <&backlight>; > + }; > -- > 2.29.2 >
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9163.txt b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt new file mode 100644 index 0000000000000..fee119991c14e --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9163.txt @@ -0,0 +1,27 @@ +Ilitek ILI9163 display panels + +This binding is for display panels using an Ilitek ILI9163 controller in SPI +mode. + +Required properties: +- compatible: "newhaven,1.8-128160EF", "ilitek,ili9163" +- dc-gpios: D/C pin +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + display@0{ + compatible = "newhaven,1.8-128160EF", "ilitek,ili9163" + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + backlight = <&backlight>; + };
This adds documentation for a new ILI9163 based, SPI connected display. Signed-off-by: Daniel Mack <daniel@zonque.org> --- .../bindings/display/ilitek,ili9163.txt | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9163.txt