| Message ID | 20210214201742.300344-1-aford173@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: imx8mn-beacon: Enable SDR104 on WiFi SDIO interface | expand |
On Sun, Feb 14, 2021 at 02:17:42PM -0600, Adam Ford wrote: > Enable 100Mhz and 200MHz pinmux and corrsesponding voltage supplies > to enable SDR104 on usdhc1 connecting the WiFi chip. > > Signed-off-by: Adam Ford <aford173@gmail.com> Applied, thanks.
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index de2cd0e3201c..c35eeaff958f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -262,8 +262,12 @@ bluetooth { &usdhc1 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <&buck4_reg>; + vqmmc-supply = <&buck5_reg>; bus-width = <4>; non-removable; cap-power-off-card;
Enable 100Mhz and 200MHz pinmux and corrsesponding voltage supplies to enable SDR104 on usdhc1 connecting the WiFi chip. Signed-off-by: Adam Ford <aford173@gmail.com>