Message ID | 20210204030316.489-1-alistair@alistair23.me (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v3,1/3] ARM: imx7d-remarkable2.dts: Initial device tree for reMarkable2 | expand |
On Wed, Feb 03, 2021 at 07:03:14PM -0800, Alistair Francis wrote: > The reMarkable2 (https://remarkable.com) is an e-ink tablet based on > the imx7d SoC. > > This commit is based on the DTS provide by reMarkable but ported to the > latest kernel (instead of 4.14). I have removed references to > non-upstream devices and have changed the UART so that the console can > be accessed without having to open up the device via the OTG pogo pins. Just out of curiosity, this is a DIY cable or something generally available from vendor? > > Currently the kernel boots, but there is no support for the dispaly, > WiFi or the power controller chips. There are still some WiFi related devices. Can we drop all those untested stuff? > > Signed-off-by: Alistair Francis <alistair@alistair23.me> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx7d-remarkable2.dts | 253 ++++++++++++++++++++++++ > 2 files changed, 254 insertions(+) > create mode 100644 arch/arm/boot/dts/imx7d-remarkable2.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 3d1ea0b25168..9608c363b25f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -658,6 +658,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ > imx7d-pico-hobbit.dtb \ > imx7d-pico-nymph.dtb \ > imx7d-pico-pi.dtb \ > + imx7d-remarkable2.dtb \ > imx7d-sbc-imx7.dtb \ > imx7d-sdb.dtb \ > imx7d-sdb-reva.dtb \ > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts > new file mode 100644 > index 000000000000..0aae13f5eed6 > --- /dev/null > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts > @@ -0,0 +1,253 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2015 Freescale Semiconductor, Inc. > + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/ > + * > + */ > + > +/dts-v1/; > + > +#include "imx7d.dtsi" > + > +/ { > + model = "reMarkable 2.0"; > + compatible = "fsl,imx7d-remarkable2", "fsl,imx7d"; The new compatible needs to be documented. Also the compatible doesn't look right, as this is a device from reMarkable rather than FSL. Shawn > + > + chosen { > + stdout-path = &uart6; > + }; > + > + memory { > + reg = <0x80000000 0x40000000>; > + }; > + > + reg_brcm: regulator-brcm { > + compatible = "regulator-fixed"; > + regulator-name = "brcm_reg"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_brcm_reg>; > + gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + startup-delay-us = <150>; > + }; > + > + wifi_pwrseq: wifi_pwrseq { > + compatible = "mmc-pwrseq-simple"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wifi>; > + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; > + clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; > + clock-names = "ext_clock"; > + }; > +}; > + > +&clks { > + assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, > + <&clks IMX7D_CLKO2_ROOT_DIV>; > + assigned-clock-parents = <&clks IMX7D_CKIL>; > + assigned-clock-rates = <0>, <32768>; > +}; > + > +&crypto { > + status = "disabled"; > +}; > + > +&dma_apbh { > + status = "disabled"; > +}; > + > +&sdma { > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; > + status = "okay"; > +}; > + > +&uart6 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart6>; > + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; > + status = "okay"; > +}; > + > +&usbotg2 { > + srp-disable; > + hnp-disable; > + status = "okay"; > +}; > + > +&usdhc2 { > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default", "state_100mhz", "sleep"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc2>; > + mmc-pwrseq = <&wifi_pwrseq>; > + vmmc-supply = <®_brcm>; > + bus-width = <4>; > + non-removable; > + keep-power-in-suspend; > + cap-power-off-card; > + status = "okay"; > + > + brcmf: bcrmf@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + }; > +}; > + > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + pinctrl-3 = <&pinctrl_usdhc3>; > + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; > + assigned-clock-rates = <400000000>; > + bus-width = <8>; > + non-removable; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > +}; > + > +&iomuxc_lpsr { > + pinctrl_digitizer_reg: digitizerreggrp { > + fsl,pins = < > + /* DIGITIZER_PWR_EN */ > + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 > + >; > + }; > +}; > + > +&iomuxc { > + pinctrl_brcm_reg: brcmreggrp { > + fsl,pins = < > + /* WIFI_PWR_EN */ > + MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 > + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 > + >; > + }; > + > + pinctrl_uart6: uart6grp { > + fsl,pins = < > + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79 > + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 > + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 > + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 > + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 > + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 > + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { > + fsl,pins = < > + MX7D_PAD_SD2_CMD__SD2_CMD 0x5a > + MX7D_PAD_SD2_CLK__SD2_CLK 0x1a > + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a > + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a > + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a > + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { > + fsl,pins = < > + MX7D_PAD_SD2_CMD__SD2_CMD 0x5b > + MX7D_PAD_SD2_CLK__SD2_CLK 0x1b > + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b > + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b > + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b > + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 > + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 > + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 > + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 > + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 > + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 > + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { > + fsl,pins = < > + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a > + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a > + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a > + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a > + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a > + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a > + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { > + fsl,pins = < > + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b > + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b > + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b > + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b > + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b > + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b > + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x74 > + >; > + }; > + > + pinctrl_wifi: wifigrp { > + fsl,pins = < > + /* WiFi Reg On */ > + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x00000014 > + /* WiFi Sleep 32k */ > + MX7D_PAD_SD1_WP__CCM_CLKO2 0x00000014 > + >; > + }; > +}; > -- > 2.30.0 >
On Wed, Mar 3, 2021 at 8:44 AM Shawn Guo <shawnguo@kernel.org> wrote: > > On Wed, Feb 03, 2021 at 07:03:14PM -0800, Alistair Francis wrote: > > The reMarkable2 (https://remarkable.com) is an e-ink tablet based on > > the imx7d SoC. > > > > This commit is based on the DTS provide by reMarkable but ported to the > > latest kernel (instead of 4.14). I have removed references to > > non-upstream devices and have changed the UART so that the console can > > be accessed without having to open up the device via the OTG pogo pins. > > Just out of curiosity, this is a DIY cable or something generally > available from vendor? It's a DIY cable, it's a bit of a pain to put together. You can see what it looks like here: https://github.com/ddvk/remarkable2-recovery > > > > > Currently the kernel boots, but there is no support for the dispaly, > > WiFi or the power controller chips. > > There are still some WiFi related devices. Can we drop all those > untested stuff? I have WiFi working on the 5.4 NXP branch. I was actually thinking that WiFi should just work if the rootFS and FW all match. The main problem is that the kernel expects a firmware version that isn't in linux-firmware. I have removed it for now though. > > > > > Signed-off-by: Alistair Francis <alistair@alistair23.me> > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/imx7d-remarkable2.dts | 253 ++++++++++++++++++++++++ > > 2 files changed, 254 insertions(+) > > create mode 100644 arch/arm/boot/dts/imx7d-remarkable2.dts > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index 3d1ea0b25168..9608c363b25f 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -658,6 +658,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ > > imx7d-pico-hobbit.dtb \ > > imx7d-pico-nymph.dtb \ > > imx7d-pico-pi.dtb \ > > + imx7d-remarkable2.dtb \ > > imx7d-sbc-imx7.dtb \ > > imx7d-sdb.dtb \ > > imx7d-sdb-reva.dtb \ > > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts > > new file mode 100644 > > index 000000000000..0aae13f5eed6 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts > > @@ -0,0 +1,253 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright (C) 2015 Freescale Semiconductor, Inc. > > + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/ > > + * > > + */ > > + > > +/dts-v1/; > > + > > +#include "imx7d.dtsi" > > + > > +/ { > > + model = "reMarkable 2.0"; > > + compatible = "fsl,imx7d-remarkable2", "fsl,imx7d"; > > The new compatible needs to be documented. Also the compatible doesn't > look right, as this is a device from reMarkable rather than FSL. Done and done. Alistair > > Shawn > > > + > > + chosen { > > + stdout-path = &uart6; > > + }; > > + > > + memory { > > + reg = <0x80000000 0x40000000>; > > + }; > > + > > + reg_brcm: regulator-brcm { > > + compatible = "regulator-fixed"; > > + regulator-name = "brcm_reg"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_brcm_reg>; > > + gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + startup-delay-us = <150>; > > + }; > > + > > + wifi_pwrseq: wifi_pwrseq { > > + compatible = "mmc-pwrseq-simple"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_wifi>; > > + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; > > + clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; > > + clock-names = "ext_clock"; > > + }; > > +}; > > + > > +&clks { > > + assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, > > + <&clks IMX7D_CLKO2_ROOT_DIV>; > > + assigned-clock-parents = <&clks IMX7D_CKIL>; > > + assigned-clock-rates = <0>, <32768>; > > +}; > > + > > +&crypto { > > + status = "disabled"; > > +}; > > + > > +&dma_apbh { > > + status = "disabled"; > > +}; > > + > > +&sdma { > > + status = "okay"; > > +}; > > + > > +&uart1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart1>; > > + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; > > + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; > > + status = "okay"; > > +}; > > + > > +&uart6 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart6>; > > + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; > > + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; > > + status = "okay"; > > +}; > > + > > +&usbotg2 { > > + srp-disable; > > + hnp-disable; > > + status = "okay"; > > +}; > > + > > +&usdhc2 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + pinctrl-names = "default", "state_100mhz", "sleep"; > > + pinctrl-0 = <&pinctrl_usdhc2>; > > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; > > + pinctrl-2 = <&pinctrl_usdhc2>; > > + mmc-pwrseq = <&wifi_pwrseq>; > > + vmmc-supply = <®_brcm>; > > + bus-width = <4>; > > + non-removable; > > + keep-power-in-suspend; > > + cap-power-off-card; > > + status = "okay"; > > + > > + brcmf: bcrmf@1 { > > + reg = <1>; > > + compatible = "brcm,bcm4329-fmac"; > > + }; > > +}; > > + > > +&usdhc3 { > > + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; > > + pinctrl-0 = <&pinctrl_usdhc3>; > > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > > + pinctrl-3 = <&pinctrl_usdhc3>; > > + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; > > + assigned-clock-rates = <400000000>; > > + bus-width = <8>; > > + non-removable; > > + status = "okay"; > > +}; > > + > > +&wdog1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_wdog>; > > + fsl,ext-reset-output; > > +}; > > + > > +&iomuxc_lpsr { > > + pinctrl_digitizer_reg: digitizerreggrp { > > + fsl,pins = < > > + /* DIGITIZER_PWR_EN */ > > + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 > > + >; > > + }; > > +}; > > + > > +&iomuxc { > > + pinctrl_brcm_reg: brcmreggrp { > > + fsl,pins = < > > + /* WIFI_PWR_EN */ > > + MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14 > > + >; > > + }; > > + > > + pinctrl_uart1: uart1grp { > > + fsl,pins = < > > + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 > > + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 > > + >; > > + }; > > + > > + pinctrl_uart6: uart6grp { > > + fsl,pins = < > > + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79 > > + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79 > > + >; > > + }; > > + > > + pinctrl_usdhc2: usdhc2grp { > > + fsl,pins = < > > + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 > > + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 > > + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 > > + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 > > + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 > > + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 > > + >; > > + }; > > + > > + pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { > > + fsl,pins = < > > + MX7D_PAD_SD2_CMD__SD2_CMD 0x5a > > + MX7D_PAD_SD2_CLK__SD2_CLK 0x1a > > + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a > > + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a > > + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a > > + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a > > + >; > > + }; > > + > > + pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { > > + fsl,pins = < > > + MX7D_PAD_SD2_CMD__SD2_CMD 0x5b > > + MX7D_PAD_SD2_CLK__SD2_CLK 0x1b > > + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b > > + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b > > + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b > > + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b > > + >; > > + }; > > + > > + pinctrl_usdhc3: usdhc3grp { > > + fsl,pins = < > > + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 > > + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 > > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 > > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 > > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 > > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 > > + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 > > + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 > > + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 > > + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 > > + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 > > + >; > > + }; > > + > > + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { > > + fsl,pins = < > > + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a > > + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a > > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a > > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a > > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a > > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a > > + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a > > + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a > > + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a > > + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a > > + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a > > + >; > > + }; > > + > > + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { > > + fsl,pins = < > > + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b > > + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b > > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b > > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b > > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b > > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b > > + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b > > + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b > > + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b > > + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b > > + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b > > + >; > > + }; > > + > > + pinctrl_wdog: wdoggrp { > > + fsl,pins = < > > + MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x74 > > + >; > > + }; > > + > > + pinctrl_wifi: wifigrp { > > + fsl,pins = < > > + /* WiFi Reg On */ > > + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x00000014 > > + /* WiFi Sleep 32k */ > > + MX7D_PAD_SD1_WP__CCM_CLKO2 0x00000014 > > + >; > > + }; > > +}; > > -- > > 2.30.0 > >
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3d1ea0b25168..9608c363b25f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -658,6 +658,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-pico-hobbit.dtb \ imx7d-pico-nymph.dtb \ imx7d-pico-pi.dtb \ + imx7d-remarkable2.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts new file mode 100644 index 000000000000..0aae13f5eed6 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/ + * + */ + +/dts-v1/; + +#include "imx7d.dtsi" + +/ { + model = "reMarkable 2.0"; + compatible = "fsl,imx7d-remarkable2", "fsl,imx7d"; + + chosen { + stdout-path = &uart6; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + reg_brcm: regulator-brcm { + compatible = "regulator-fixed"; + regulator-name = "brcm_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <150>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi>; + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; + clock-names = "ext_clock"; + }; +}; + +&clks { + assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, + <&clks IMX7D_CLKO2_ROOT_DIV>; + assigned-clock-parents = <&clks IMX7D_CKIL>; + assigned-clock-rates = <0>, <32768>; +}; + +&crypto { + status = "disabled"; +}; + +&dma_apbh { + status = "disabled"; +}; + +&sdma { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&usbotg2 { + srp-disable; + hnp-disable; + status = "okay"; +}; + +&usdhc2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "state_100mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2>; + mmc-pwrseq = <&wifi_pwrseq>; + vmmc-supply = <®_brcm>; + bus-width = <4>; + non-removable; + keep-power-in-suspend; + cap-power-off-card; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc_lpsr { + pinctrl_digitizer_reg: digitizerreggrp { + fsl,pins = < + /* DIGITIZER_PWR_EN */ + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14 + >; + }; +}; + +&iomuxc { + pinctrl_brcm_reg: brcmreggrp { + fsl,pins = < + /* WIFI_PWR_EN */ + MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79 + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5a + MX7D_PAD_SD2_CLK__SD2_CLK 0x1a + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5b + MX7D_PAD_SD2_CLK__SD2_CLK 0x1b + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x74 + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + /* WiFi Reg On */ + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x00000014 + /* WiFi Sleep 32k */ + MX7D_PAD_SD1_WP__CCM_CLKO2 0x00000014 + >; + }; +};
The reMarkable2 (https://remarkable.com) is an e-ink tablet based on the imx7d SoC. This commit is based on the DTS provide by reMarkable but ported to the latest kernel (instead of 4.14). I have removed references to non-upstream devices and have changed the UART so that the console can be accessed without having to open up the device via the OTG pogo pins. Currently the kernel boots, but there is no support for the dispaly, WiFi or the power controller chips. Signed-off-by: Alistair Francis <alistair@alistair23.me> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx7d-remarkable2.dts | 253 ++++++++++++++++++++++++ 2 files changed, 254 insertions(+) create mode 100644 arch/arm/boot/dts/imx7d-remarkable2.dts