diff mbox series

[06/10] xfs: test quota softlimit warning functionality

Message ID 161526483668.1214319.17667836667890283825.stgit@magnolia (mailing list archive)
State Accepted, archived
Headers show
Series fstests: test kernel regressions fixed in 5.12 | expand

Commit Message

Darrick J. Wong March 9, 2021, 4:40 a.m. UTC
From: Darrick J. Wong <djwong@kernel.org>

Make sure that quota softlimits work, which is to say that one can
exceed the softlimit up to warnlimit times before it starts enforcing
that.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
 tests/xfs/915     |  162 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/915.out |  151 +++++++++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/group   |    1 
 3 files changed, 314 insertions(+)
 create mode 100755 tests/xfs/915
 create mode 100644 tests/xfs/915.out

Comments

Chandan Babu R March 11, 2021, 11:10 a.m. UTC | #1
On 09 Mar 2021 at 10:10, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
>
> Make sure that quota softlimits work, which is to say that one can
> exceed the softlimit up to warnlimit times before it starts enforcing
> that.
>
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> ---
>  tests/xfs/915     |  162 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/xfs/915.out |  151 +++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/xfs/group   |    1
>  3 files changed, 314 insertions(+)
>  create mode 100755 tests/xfs/915
>  create mode 100644 tests/xfs/915.out
>
>
> diff --git a/tests/xfs/915 b/tests/xfs/915
> new file mode 100755
> index 00000000..a2cdbbb7
> --- /dev/null
> +++ b/tests/xfs/915
> @@ -0,0 +1,162 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle.  All Rights Reserved.
> +#
> +# FS QA Test No. 915
> +#
> +# Check that quota softlimit warnings work the way they should.  This means
> +# that we can disobey the softlimit up to warnlimit times before it turns into
> +# hard(er) enforcement.  This is a functional test for quota warnings, but
> +# since the functionality has been broken for decades, this is also a
> +# regression test for commit 4b8628d57b72 ("xfs: actually bump warning counts
> +# when we send warnings").
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1    # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/quota
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_xfs_quota
> +_require_scratch
> +
> +rm -f $seqres.full
> +
> +qsetup()
> +{
> +	opt=$1
> +	enforce=0
> +	if [ $opt = "u" -o $opt = "uno" ]; then
> +		type=u
> +		eval `_choose_uid`
> +	elif [ $opt = "g" -o $opt = "gno" ]; then
> +		type=g
> +		eval `_choose_gid`
> +	elif [ $opt = "p" -o $opt = "pno" ]; then
> +		type=p
> +		eval `_choose_prid`
> +	fi
> +	[ $opt = "u" -o $opt = "g" -o $opt = "p" ] && enforce=1
> +
> +	echo "Using type=$type id=$id" >> $seqres.full
> +}
> +
> +exercise() {
> +	_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
> +	cat $tmp.mkfs >>$seqres.full
> +
> +	# keep the blocksize and data size for dd later
> +	. $tmp.mkfs
> +
> +	_qmount
> +
> +	qsetup $1
> +
> +	echo "Using type=$type id=$id" >>$seqres.full
> +
> +	echo
> +	echo "*** report initial settings" | tee -a $seqres.full
> +	$XFS_QUOTA_PROG -x \
> +		-c "limit -$type isoft=3 ihard=500000 $id" \
> +		-c "warn -$type -i -d 13" \
> +		$SCRATCH_DEV
> +	$XFS_QUOTA_PROG -x \
> +		-c "state -$type" >> $seqres.full
> +	$XFS_QUOTA_PROG -x \
> +		-c "repquota -birnN -$type" $SCRATCH_DEV |
> +		_filter_quota_report | LC_COLLATE=POSIX sort -ru
> +
> +	echo
> +	echo "*** push past the soft inode limit" | tee -a $seqres.full
> +	_file_as_id $SCRATCH_MNT/softok1 $id $type $bsize 0
> +	_file_as_id $SCRATCH_MNT/softok2 $id $type $bsize 0
> +	_file_as_id $SCRATCH_MNT/softok3 $id $type $bsize 0
> +	_file_as_id $SCRATCH_MNT/softwarn1 $id $type $bsize 0
> +	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> +		-c "repquota -birnN -$type" $SCRATCH_DEV |
> +		_filter_quota_report | LC_COLLATE=POSIX sort -ru
> +
> +	echo
> +	echo "*** push further past the soft inode limit" | tee -a $seqres.full
> +	for warn_nr in $(seq 2 5); do
> +		_file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
> +	done
> +	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> +		-c "repquota -birnN -$type" $SCRATCH_DEV |
> +		_filter_quota_report | LC_COLLATE=POSIX sort -ru
> +
> +	echo
> +	echo "*** push past the soft inode warning limit" | tee -a $seqres.full
> +	for warn_nr in $(seq 6 15); do
> +		_file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
> +	done
> +	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> +		-c "repquota -birnN -$type" $SCRATCH_DEV |
> +		_filter_quota_report | LC_COLLATE=POSIX sort -ru
> +
> +	echo
> +	echo "*** unmount"
> +	_scratch_unmount
> +}
> +
> +_scratch_mkfs > $seqres.full
> +_scratch_mount >> $seqres.full
> +
> +chmod a+rwx $SCRATCH_MNT $seqres.full	# arbitrary users will write here
> +bsize=$(_get_file_block_size $SCRATCH_MNT)
> +_scratch_unmount
> +
> +cat >$tmp.projects <<EOF
> +1:$SCRATCH_MNT
> +EOF
> +
> +cat >$tmp.projid <<EOF
> +root:0
> +scratch:1
> +EOF
> +
> +projid_file="$tmp.projid"
> +
> +echo "*** user"
> +_qmount_option "uquota"
> +exercise u
> +
> +echo "*** group"
> +_qmount_option "gquota"
> +exercise g
> +
> +echo "*** uqnoenforce"
> +_qmount_option "uqnoenforce"
> +exercise uno
> +
> +echo "*** gqnoenforce"
> +_qmount_option "gqnoenforce"
> +exercise gno
> +
> +echo "*** pquota"
> +_qmount_option "pquota"
> +exercise p
> +
> +echo "*** pqnoenforce"
> +_qmount_option "pqnoenforce"
> +exercise pno
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/915.out b/tests/xfs/915.out
> new file mode 100644
> index 00000000..c3bb855e
> --- /dev/null
> +++ b/tests/xfs/915.out
> @@ -0,0 +1,151 @@
> +QA output created by 915
> +*** user
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data     = bsize=XXX blocks=XXX, imaxpct=PCT
> +         = sunit=XXX swidth=XXX, unwritten=X
> +naming   =VERN bsize=XXX
> +log      =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
> +
> +*** push further past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
> +
> +*** push past the soft inode warning limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
> +
> +*** unmount
> +*** group
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data     = bsize=XXX blocks=XXX, imaxpct=PCT
> +         = sunit=XXX swidth=XXX, unwritten=X
> +naming   =VERN bsize=XXX
> +log      =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
> +
> +*** push further past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
> +
> +*** push past the soft inode warning limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
> +
> +*** unmount
> +*** uqnoenforce
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data     = bsize=XXX blocks=XXX, imaxpct=PCT
> +         = sunit=XXX swidth=XXX, unwritten=X
> +naming   =VERN bsize=XXX
> +log      =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push further past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode warning limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** unmount
> +*** gqnoenforce
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data     = bsize=XXX blocks=XXX, imaxpct=PCT
> +         = sunit=XXX swidth=XXX, unwritten=X
> +naming   =VERN bsize=XXX
> +log      =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push further past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode warning limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** unmount
> +*** pquota
> +meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> +data     = bsize=XXX blocks=XXX, imaxpct=PCT
> +         = sunit=XXX swidth=XXX, unwritten=X
> +naming   =VERN bsize=XXX
> +log      =LDEV bsize=XXX blocks=XXX
> +realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> +
> +*** report initial settings
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
> +
> +*** push past the soft inode limit
> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
> +[NAME] 0 0 0 00 [--------] 4 3 500000 02 [7 days] 0 0 0 00 [--------]

At this point in the test we have created 4 files.
1. softok{1,2,3}
2. softwarn1

So we have exceeded the soft inode limit (i.e. 3) once. But the warning has
been issued twice.

_file_as_id() changes the project id of parent of each of the above files.  In
this case all the above listed files have $SCRATCH_MNT as the parent. So by
the time softok2 is created we have already reached the soft inode limit of 3
(parent and the two softok{1,2} files) and creation of softok3 and softwarn1
generates the two warnings listed above. If this explaination is correct,
shouldn't 'Used' inode count have a value of 5 (including the inode associated
with $SCRATCH_MNT)?

--
chandan
Chandan Babu R March 12, 2021, 4:25 a.m. UTC | #2
On 11 Mar 2021 at 16:40, Chandan Babu R wrote:
> On 09 Mar 2021 at 10:10, Darrick J. Wong wrote:
>> From: Darrick J. Wong <djwong@kernel.org>
>>
>> Make sure that quota softlimits work, which is to say that one can
>> exceed the softlimit up to warnlimit times before it starts enforcing
>> that.
>>
>> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
>> ---
>>  tests/xfs/915     |  162 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>>  tests/xfs/915.out |  151 +++++++++++++++++++++++++++++++++++++++++++++++++
>>  tests/xfs/group   |    1
>>  3 files changed, 314 insertions(+)
>>  create mode 100755 tests/xfs/915
>>  create mode 100644 tests/xfs/915.out
>>
>>
>> diff --git a/tests/xfs/915 b/tests/xfs/915

[...]

>> +*** report initial settings
>> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
>> +[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
>> +
>> +*** push past the soft inode limit
>> +[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
>> +[NAME] 0 0 0 00 [--------] 4 3 500000 02 [7 days] 0 0 0 00 [--------]
>
> At this point in the test we have created 4 files.
> 1. softok{1,2,3}
> 2. softwarn1
>
> So we have exceeded the soft inode limit (i.e. 3) once. But the warning has
> been issued twice.
>
> _file_as_id() changes the project id of parent of each of the above files.  In
> this case all the above listed files have $SCRATCH_MNT as the parent. So by
> the time softok2 is created we have already reached the soft inode limit of 3
> (parent and the two softok{1,2} files) and creation of softok3 and softwarn1
> generates the two warnings listed above. If this explaination is correct,
> shouldn't 'Used' inode count have a value of 5 (including the inode associated
> with $SCRATCH_MNT)?

Sorry, I missed the fact that _file_as_id() reverts back the project id of
$SCRATCH_MNT just before returning.

The patch looks good.

Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
diff mbox series

Patch

diff --git a/tests/xfs/915 b/tests/xfs/915
new file mode 100755
index 00000000..a2cdbbb7
--- /dev/null
+++ b/tests/xfs/915
@@ -0,0 +1,162 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2021 Oracle.  All Rights Reserved.
+#
+# FS QA Test No. 915
+#
+# Check that quota softlimit warnings work the way they should.  This means
+# that we can disobey the softlimit up to warnlimit times before it turns into
+# hard(er) enforcement.  This is a functional test for quota warnings, but
+# since the functionality has been broken for decades, this is also a
+# regression test for commit 4b8628d57b72 ("xfs: actually bump warning counts
+# when we send warnings").
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1    # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# real QA test starts here
+_supported_fs xfs
+_require_xfs_quota
+_require_scratch
+
+rm -f $seqres.full
+
+qsetup()
+{
+	opt=$1
+	enforce=0
+	if [ $opt = "u" -o $opt = "uno" ]; then
+		type=u
+		eval `_choose_uid`
+	elif [ $opt = "g" -o $opt = "gno" ]; then
+		type=g
+		eval `_choose_gid`
+	elif [ $opt = "p" -o $opt = "pno" ]; then
+		type=p
+		eval `_choose_prid`
+	fi
+	[ $opt = "u" -o $opt = "g" -o $opt = "p" ] && enforce=1
+
+	echo "Using type=$type id=$id" >> $seqres.full
+}
+
+exercise() {
+	_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
+	cat $tmp.mkfs >>$seqres.full
+
+	# keep the blocksize and data size for dd later
+	. $tmp.mkfs
+
+	_qmount
+
+	qsetup $1
+
+	echo "Using type=$type id=$id" >>$seqres.full
+
+	echo
+	echo "*** report initial settings" | tee -a $seqres.full
+	$XFS_QUOTA_PROG -x \
+		-c "limit -$type isoft=3 ihard=500000 $id" \
+		-c "warn -$type -i -d 13" \
+		$SCRATCH_DEV
+	$XFS_QUOTA_PROG -x \
+		-c "state -$type" >> $seqres.full
+	$XFS_QUOTA_PROG -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+	echo
+	echo "*** push past the soft inode limit" | tee -a $seqres.full
+	_file_as_id $SCRATCH_MNT/softok1 $id $type $bsize 0
+	_file_as_id $SCRATCH_MNT/softok2 $id $type $bsize 0
+	_file_as_id $SCRATCH_MNT/softok3 $id $type $bsize 0
+	_file_as_id $SCRATCH_MNT/softwarn1 $id $type $bsize 0
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+	echo
+	echo "*** push further past the soft inode limit" | tee -a $seqres.full
+	for warn_nr in $(seq 2 5); do
+		_file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
+	done
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+	echo
+	echo "*** push past the soft inode warning limit" | tee -a $seqres.full
+	for warn_nr in $(seq 6 15); do
+		_file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
+	done
+	$XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+		-c "repquota -birnN -$type" $SCRATCH_DEV |
+		_filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+	echo
+	echo "*** unmount"
+	_scratch_unmount
+}
+
+_scratch_mkfs > $seqres.full
+_scratch_mount >> $seqres.full
+
+chmod a+rwx $SCRATCH_MNT $seqres.full	# arbitrary users will write here
+bsize=$(_get_file_block_size $SCRATCH_MNT)
+_scratch_unmount
+
+cat >$tmp.projects <<EOF
+1:$SCRATCH_MNT
+EOF
+
+cat >$tmp.projid <<EOF
+root:0
+scratch:1
+EOF
+
+projid_file="$tmp.projid"
+
+echo "*** user"
+_qmount_option "uquota"
+exercise u
+
+echo "*** group"
+_qmount_option "gquota"
+exercise g
+
+echo "*** uqnoenforce"
+_qmount_option "uqnoenforce"
+exercise uno
+
+echo "*** gqnoenforce"
+_qmount_option "gqnoenforce"
+exercise gno
+
+echo "*** pquota"
+_qmount_option "pquota"
+exercise p
+
+echo "*** pqnoenforce"
+_qmount_option "pqnoenforce"
+exercise pno
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/915.out b/tests/xfs/915.out
new file mode 100644
index 00000000..c3bb855e
--- /dev/null
+++ b/tests/xfs/915.out
@@ -0,0 +1,151 @@ 
+QA output created by 915
+*** user
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data     = bsize=XXX blocks=XXX, imaxpct=PCT
+         = sunit=XXX swidth=XXX, unwritten=X
+naming   =VERN bsize=XXX
+log      =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
+
+*** unmount
+*** group
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data     = bsize=XXX blocks=XXX, imaxpct=PCT
+         = sunit=XXX swidth=XXX, unwritten=X
+naming   =VERN bsize=XXX
+log      =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
+
+*** unmount
+*** uqnoenforce
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data     = bsize=XXX blocks=XXX, imaxpct=PCT
+         = sunit=XXX swidth=XXX, unwritten=X
+naming   =VERN bsize=XXX
+log      =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** unmount
+*** gqnoenforce
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data     = bsize=XXX blocks=XXX, imaxpct=PCT
+         = sunit=XXX swidth=XXX, unwritten=X
+naming   =VERN bsize=XXX
+log      =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** unmount
+*** pquota
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data     = bsize=XXX blocks=XXX, imaxpct=PCT
+         = sunit=XXX swidth=XXX, unwritten=X
+naming   =VERN bsize=XXX
+log      =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 02 [7 days] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 06 [7 days] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 15 3 500000 13 [7 days] 0 0 0 00 [--------]
+
+*** unmount
+*** pqnoenforce
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data     = bsize=XXX blocks=XXX, imaxpct=PCT
+         = sunit=XXX swidth=XXX, unwritten=X
+naming   =VERN bsize=XXX
+log      =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** unmount
diff --git a/tests/xfs/group b/tests/xfs/group
index 87badd56..d7aafc94 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -505,3 +505,4 @@ 
 760 auto quick rw collapse punch insert zero prealloc
 761 auto quick realtime
 763 auto quick rw realtime
+915 auto quick quota