| Message ID | 20210311062011.8054-12-calvin.johnson@oss.nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ACPI support for dpaa2 driver | expand |
On Thu, Mar 11, 2021 at 8:22 AM Calvin Johnson <calvin.johnson@oss.nxp.com> wrote: > > Define acpi_mdiobus_register() to Register mii_bus and create PHYs for > each ACPI child node. > > Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> > --- > > Changes in v7: > - Include headers directly used in acpi_mdio.c > > Changes in v6: > - use GENMASK() and ACPI_COMPANION_SET() > - some cleanup > - remove unwanted header inclusion > > Changes in v5: > - add missing MODULE_LICENSE() > - replace fwnode_get_id() with OF and ACPI function calls > > Changes in v4: None > Changes in v3: None > Changes in v2: None > > MAINTAINERS | 1 + > drivers/net/mdio/Kconfig | 7 +++++ > drivers/net/mdio/Makefile | 1 + > drivers/net/mdio/acpi_mdio.c | 56 ++++++++++++++++++++++++++++++++++++ > include/linux/acpi_mdio.h | 25 ++++++++++++++++ > 5 files changed, 90 insertions(+) > create mode 100644 drivers/net/mdio/acpi_mdio.c > create mode 100644 include/linux/acpi_mdio.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 146de41d2656..051377b7fa94 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6680,6 +6680,7 @@ F: Documentation/devicetree/bindings/net/mdio* > F: Documentation/devicetree/bindings/net/qca,ar803x.yaml > F: Documentation/networking/phy.rst > F: drivers/net/mdio/ > +F: drivers/net/mdio/acpi_mdio.c > F: drivers/net/mdio/fwnode_mdio.c > F: drivers/net/mdio/of_mdio.c > F: drivers/net/pcs/ > diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig > index 2d5bf5ccffb5..fc8c787b448f 100644 > --- a/drivers/net/mdio/Kconfig > +++ b/drivers/net/mdio/Kconfig > @@ -36,6 +36,13 @@ config OF_MDIO > help > OpenFirmware MDIO bus (Ethernet PHY) accessors > > +config ACPI_MDIO > + def_tristate PHYLIB > + depends on ACPI > + depends on PHYLIB Same issue, they are no-ops. I guess you have to surround OF and ACPI and FWNODE variants by if PHYLIB ... endif This will be an equivalent to depends on PHYLIB and put this into Makefile ifneq ($(CONFIG_ACPI),) obj-$(CONFIG_PHYLIB) += acpi_mdio.o endif This will give you the rest, i.e. default PHYLIB + depends on ACPI Similar for OF > + help > + ACPI MDIO bus (Ethernet PHY) accessors > + > if MDIO_BUS > > config MDIO_DEVRES > diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile > index ea5390e2ef84..e8b739a3df1c 100644 > --- a/drivers/net/mdio/Makefile > +++ b/drivers/net/mdio/Makefile > @@ -1,6 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0 > # Makefile for Linux MDIO bus drivers > > +obj-$(CONFIG_ACPI_MDIO) += acpi_mdio.o > obj-$(CONFIG_FWNODE_MDIO) += fwnode_mdio.o > obj-$(CONFIG_OF_MDIO) += of_mdio.o > > diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c > new file mode 100644 > index 000000000000..60a86e3fc246 > --- /dev/null > +++ b/drivers/net/mdio/acpi_mdio.c > @@ -0,0 +1,56 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * ACPI helpers for the MDIO (Ethernet PHY) API > + * > + * This file provides helper functions for extracting PHY device information > + * out of the ACPI ASL and using it to populate an mii_bus. > + */ > + > +#include <linux/acpi.h> > +#include <linux/acpi_mdio.h> > +#include <linux/bits.h> > +#include <linux/dev_printk.h> > +#include <linux/fwnode_mdio.h> > +#include <linux/module.h> > +#include <linux/types.h> > + > +MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>"); > +MODULE_LICENSE("GPL"); > + > +/** > + * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL. > + * @mdio: pointer to mii_bus structure > + * @fwnode: pointer to fwnode of MDIO bus. > + * > + * This function registers the mii_bus structure and registers a phy_device > + * for each child node of @fwnode. > + */ > +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode) > +{ > + struct fwnode_handle *child; > + u32 addr; > + int ret; > + > + /* Mask out all PHYs from auto probing. */ > + mdio->phy_mask = GENMASK(31, 0); > + ret = mdiobus_register(mdio); > + if (ret) > + return ret; > + > + ACPI_COMPANION_SET(&mdio->dev, to_acpi_device_node(fwnode)); > + > + /* Loop over the child nodes and register a phy_device for each PHY */ > + fwnode_for_each_child_node(fwnode, child) { > + ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr); > + if (ret || addr >= PHY_MAX_ADDR) > + continue; > + > + ret = fwnode_mdiobus_register_phy(mdio, child, addr); > + if (ret == -ENODEV) > + dev_err(&mdio->dev, > + "MDIO device at address %d is missing.\n", > + addr); > + } > + return 0; > +} > +EXPORT_SYMBOL(acpi_mdiobus_register); > diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h > new file mode 100644 > index 000000000000..748d261fe2f9 > --- /dev/null > +++ b/include/linux/acpi_mdio.h > @@ -0,0 +1,25 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * ACPI helper for the MDIO (Ethernet PHY) API > + */ > + > +#ifndef __LINUX_ACPI_MDIO_H > +#define __LINUX_ACPI_MDIO_H > + > +#include <linux/phy.h> > + > +#if IS_ENABLED(CONFIG_ACPI_MDIO) > +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode); > +#else /* CONFIG_ACPI_MDIO */ > +static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode) > +{ > + /* > + * Fall back to mdiobus_register() function to register a bus. > + * This way, we don't have to keep compat bits around in drivers. > + */ > + > + return mdiobus_register(mdio); > +} > +#endif > + > +#endif /* __LINUX_ACPI_MDIO_H */ > -- > 2.17.1 >
On Thu, Mar 11, 2021 at 02:14:37PM +0200, Andy Shevchenko wrote: > On Thu, Mar 11, 2021 at 8:22 AM Calvin Johnson > <calvin.johnson@oss.nxp.com> wrote: > > > > Define acpi_mdiobus_register() to Register mii_bus and create PHYs for > > each ACPI child node. > > > > Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> > > --- > > > > Changes in v7: > > - Include headers directly used in acpi_mdio.c > > > > Changes in v6: > > - use GENMASK() and ACPI_COMPANION_SET() > > - some cleanup > > - remove unwanted header inclusion > > > > Changes in v5: > > - add missing MODULE_LICENSE() > > - replace fwnode_get_id() with OF and ACPI function calls > > > > Changes in v4: None > > Changes in v3: None > > Changes in v2: None > > > > MAINTAINERS | 1 + > > drivers/net/mdio/Kconfig | 7 +++++ > > drivers/net/mdio/Makefile | 1 + > > drivers/net/mdio/acpi_mdio.c | 56 ++++++++++++++++++++++++++++++++++++ > > include/linux/acpi_mdio.h | 25 ++++++++++++++++ > > 5 files changed, 90 insertions(+) > > create mode 100644 drivers/net/mdio/acpi_mdio.c > > create mode 100644 include/linux/acpi_mdio.h > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 146de41d2656..051377b7fa94 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -6680,6 +6680,7 @@ F: Documentation/devicetree/bindings/net/mdio* > > F: Documentation/devicetree/bindings/net/qca,ar803x.yaml > > F: Documentation/networking/phy.rst > > F: drivers/net/mdio/ > > +F: drivers/net/mdio/acpi_mdio.c > > F: drivers/net/mdio/fwnode_mdio.c > > F: drivers/net/mdio/of_mdio.c > > F: drivers/net/pcs/ > > diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig > > index 2d5bf5ccffb5..fc8c787b448f 100644 > > --- a/drivers/net/mdio/Kconfig > > +++ b/drivers/net/mdio/Kconfig > > @@ -36,6 +36,13 @@ config OF_MDIO > > help > > OpenFirmware MDIO bus (Ethernet PHY) accessors > > > > +config ACPI_MDIO > > + def_tristate PHYLIB > > > + depends on ACPI > > + depends on PHYLIB > > Same issue, they are no-ops. > > I guess you have to surround OF and ACPI and FWNODE variants by > > if PHYLIB > ... > endif > > This will be an equivalent to depends on PHYLIB > > and put this into Makefile > > ifneq ($(CONFIG_ACPI),) > obj-$(CONFIG_PHYLIB) += acpi_mdio.o > endif > > This will give you the rest, i.e. default PHYLIB + depends on ACPI > > Similar for OF > I checked the effect of y/n/m choice of PHYLIB on FWNODE_MDIO. As expected with def_tristate, whenever PHYLIB changes to y/n/m corresponding change is reflected on FWNODE_MDIO, also considering the state of other depending CONFIGS like OF and ACPI. Symbol: FWNODE_MDIO [=n] │ │ Type : tristate │ │ Defined at drivers/net/mdio/Kconfig:22 │ │ Depends on: NETDEVICES [=y] && MDIO_DEVICE [=y] && ACPI [=y] && OF [=y] && PHYLIB [=n] │ │ Selects: FIXED_PHY [=n] Effect is similar for ACPI_MDIO and OF_MDIO. So instead of above proposed method, I think what you proposed in your earlier email, i.e, "depends on (ACPI || OF) || COMPILE_TEST" seems to be better for FWNODE_MDIO. Shall we go ahead with this? Regards Calvin > > + help > > + ACPI MDIO bus (Ethernet PHY) accessors > > + > > if MDIO_BUS > > > > config MDIO_DEVRES > > diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile > > index ea5390e2ef84..e8b739a3df1c 100644 > > --- a/drivers/net/mdio/Makefile > > +++ b/drivers/net/mdio/Makefile > > @@ -1,6 +1,7 @@ > > # SPDX-License-Identifier: GPL-2.0 > > # Makefile for Linux MDIO bus drivers > > > > +obj-$(CONFIG_ACPI_MDIO) += acpi_mdio.o > > obj-$(CONFIG_FWNODE_MDIO) += fwnode_mdio.o > > obj-$(CONFIG_OF_MDIO) += of_mdio.o > > > > diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c > > new file mode 100644 > > index 000000000000..60a86e3fc246 > > --- /dev/null > > +++ b/drivers/net/mdio/acpi_mdio.c > > @@ -0,0 +1,56 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * ACPI helpers for the MDIO (Ethernet PHY) API > > + * > > + * This file provides helper functions for extracting PHY device information > > + * out of the ACPI ASL and using it to populate an mii_bus. > > + */ > > + > > +#include <linux/acpi.h> > > +#include <linux/acpi_mdio.h> > > +#include <linux/bits.h> > > +#include <linux/dev_printk.h> > > +#include <linux/fwnode_mdio.h> > > +#include <linux/module.h> > > +#include <linux/types.h> > > + > > +MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>"); > > +MODULE_LICENSE("GPL"); > > + > > +/** > > + * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL. > > + * @mdio: pointer to mii_bus structure > > + * @fwnode: pointer to fwnode of MDIO bus. > > + * > > + * This function registers the mii_bus structure and registers a phy_device > > + * for each child node of @fwnode. > > + */ > > +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode) > > +{ > > + struct fwnode_handle *child; > > + u32 addr; > > + int ret; > > + > > + /* Mask out all PHYs from auto probing. */ > > + mdio->phy_mask = GENMASK(31, 0); > > + ret = mdiobus_register(mdio); > > + if (ret) > > + return ret; > > + > > + ACPI_COMPANION_SET(&mdio->dev, to_acpi_device_node(fwnode)); > > + > > + /* Loop over the child nodes and register a phy_device for each PHY */ > > + fwnode_for_each_child_node(fwnode, child) { > > + ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr); > > + if (ret || addr >= PHY_MAX_ADDR) > > + continue; > > + > > + ret = fwnode_mdiobus_register_phy(mdio, child, addr); > > + if (ret == -ENODEV) > > + dev_err(&mdio->dev, > > + "MDIO device at address %d is missing.\n", > > + addr); > > + } > > + return 0; > > +} > > +EXPORT_SYMBOL(acpi_mdiobus_register); > > diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h > > new file mode 100644 > > index 000000000000..748d261fe2f9 > > --- /dev/null > > +++ b/include/linux/acpi_mdio.h > > @@ -0,0 +1,25 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > +/* > > + * ACPI helper for the MDIO (Ethernet PHY) API > > + */ > > + > > +#ifndef __LINUX_ACPI_MDIO_H > > +#define __LINUX_ACPI_MDIO_H > > + > > +#include <linux/phy.h> > > + > > +#if IS_ENABLED(CONFIG_ACPI_MDIO) > > +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode); > > +#else /* CONFIG_ACPI_MDIO */ > > +static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode) > > +{ > > + /* > > + * Fall back to mdiobus_register() function to register a bus. > > + * This way, we don't have to keep compat bits around in drivers. > > + */ > > + > > + return mdiobus_register(mdio); > > +} > > +#endif > > + > > +#endif /* __LINUX_ACPI_MDIO_H */ > > -- > > 2.17.1 > > > > > -- > With Best Regards, > Andy Shevchenko
diff --git a/MAINTAINERS b/MAINTAINERS index 146de41d2656..051377b7fa94 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6680,6 +6680,7 @@ F: Documentation/devicetree/bindings/net/mdio* F: Documentation/devicetree/bindings/net/qca,ar803x.yaml F: Documentation/networking/phy.rst F: drivers/net/mdio/ +F: drivers/net/mdio/acpi_mdio.c F: drivers/net/mdio/fwnode_mdio.c F: drivers/net/mdio/of_mdio.c F: drivers/net/pcs/ diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig index 2d5bf5ccffb5..fc8c787b448f 100644 --- a/drivers/net/mdio/Kconfig +++ b/drivers/net/mdio/Kconfig @@ -36,6 +36,13 @@ config OF_MDIO help OpenFirmware MDIO bus (Ethernet PHY) accessors +config ACPI_MDIO + def_tristate PHYLIB + depends on ACPI + depends on PHYLIB + help + ACPI MDIO bus (Ethernet PHY) accessors + if MDIO_BUS config MDIO_DEVRES diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile index ea5390e2ef84..e8b739a3df1c 100644 --- a/drivers/net/mdio/Makefile +++ b/drivers/net/mdio/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for Linux MDIO bus drivers +obj-$(CONFIG_ACPI_MDIO) += acpi_mdio.o obj-$(CONFIG_FWNODE_MDIO) += fwnode_mdio.o obj-$(CONFIG_OF_MDIO) += of_mdio.o diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c new file mode 100644 index 000000000000..60a86e3fc246 --- /dev/null +++ b/drivers/net/mdio/acpi_mdio.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ACPI helpers for the MDIO (Ethernet PHY) API + * + * This file provides helper functions for extracting PHY device information + * out of the ACPI ASL and using it to populate an mii_bus. + */ + +#include <linux/acpi.h> +#include <linux/acpi_mdio.h> +#include <linux/bits.h> +#include <linux/dev_printk.h> +#include <linux/fwnode_mdio.h> +#include <linux/module.h> +#include <linux/types.h> + +MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>"); +MODULE_LICENSE("GPL"); + +/** + * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL. + * @mdio: pointer to mii_bus structure + * @fwnode: pointer to fwnode of MDIO bus. + * + * This function registers the mii_bus structure and registers a phy_device + * for each child node of @fwnode. + */ +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode) +{ + struct fwnode_handle *child; + u32 addr; + int ret; + + /* Mask out all PHYs from auto probing. */ + mdio->phy_mask = GENMASK(31, 0); + ret = mdiobus_register(mdio); + if (ret) + return ret; + + ACPI_COMPANION_SET(&mdio->dev, to_acpi_device_node(fwnode)); + + /* Loop over the child nodes and register a phy_device for each PHY */ + fwnode_for_each_child_node(fwnode, child) { + ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr); + if (ret || addr >= PHY_MAX_ADDR) + continue; + + ret = fwnode_mdiobus_register_phy(mdio, child, addr); + if (ret == -ENODEV) + dev_err(&mdio->dev, + "MDIO device at address %d is missing.\n", + addr); + } + return 0; +} +EXPORT_SYMBOL(acpi_mdiobus_register); diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h new file mode 100644 index 000000000000..748d261fe2f9 --- /dev/null +++ b/include/linux/acpi_mdio.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * ACPI helper for the MDIO (Ethernet PHY) API + */ + +#ifndef __LINUX_ACPI_MDIO_H +#define __LINUX_ACPI_MDIO_H + +#include <linux/phy.h> + +#if IS_ENABLED(CONFIG_ACPI_MDIO) +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode); +#else /* CONFIG_ACPI_MDIO */ +static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode) +{ + /* + * Fall back to mdiobus_register() function to register a bus. + * This way, we don't have to keep compat bits around in drivers. + */ + + return mdiobus_register(mdio); +} +#endif + +#endif /* __LINUX_ACPI_MDIO_H */
Define acpi_mdiobus_register() to Register mii_bus and create PHYs for each ACPI child node. Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com> --- Changes in v7: - Include headers directly used in acpi_mdio.c Changes in v6: - use GENMASK() and ACPI_COMPANION_SET() - some cleanup - remove unwanted header inclusion Changes in v5: - add missing MODULE_LICENSE() - replace fwnode_get_id() with OF and ACPI function calls Changes in v4: None Changes in v3: None Changes in v2: None MAINTAINERS | 1 + drivers/net/mdio/Kconfig | 7 +++++ drivers/net/mdio/Makefile | 1 + drivers/net/mdio/acpi_mdio.c | 56 ++++++++++++++++++++++++++++++++++++ include/linux/acpi_mdio.h | 25 ++++++++++++++++ 5 files changed, 90 insertions(+) create mode 100644 drivers/net/mdio/acpi_mdio.c create mode 100644 include/linux/acpi_mdio.h