| Message ID | 1615447798-6959-3-git-send-email-skakit@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add RTC support for PMIC PMK8350 | expand |
On Thu, 11 Mar 2021 12:59:57 +0530, satya priya wrote: > Convert pm8xxx rtc bindings from .txt to .yaml format. > > Signed-off-by: satya priya <skakit@codeaurora.org> > --- > .../devicetree/bindings/mfd/qcom-pm8xxx.txt | 99 ------------------- > .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 108 +++++++++++++++++++++ > 2 files changed, 108 insertions(+), 99 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt > create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml:27:6: [warning] wrong indentation: expected 4 but found 5 (indentation) ./Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml:30:6: [warning] wrong indentation: expected 4 but found 5 (indentation) dtschema/dtc warnings/errors: See https://patchwork.ozlabs.org/patch/1450975 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Thu 11 Mar 01:29 CST 2021, satya priya wrote: > Convert pm8xxx rtc bindings from .txt to .yaml format. > Wonderful initiative, thank you! > Signed-off-by: satya priya <skakit@codeaurora.org> > --- > .../devicetree/bindings/mfd/qcom-pm8xxx.txt | 99 ------------------- > .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 108 +++++++++++++++++++++ > 2 files changed, 108 insertions(+), 99 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt > create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt > deleted file mode 100644 > index 9e5eba4..0000000 > --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt > +++ /dev/null > @@ -1,99 +0,0 @@ > -Qualcomm PM8xxx PMIC multi-function devices > - > -The PM8xxx family of Power Management ICs are used to provide regulated > -voltages and other various functionality to Qualcomm SoCs. > - > -= PROPERTIES > - > -- compatible: > - Usage: required > - Value type: <string> > - Definition: must be one of: > - "qcom,pm8058" > - "qcom,pm8821" > - "qcom,pm8921" > - > -- #address-cells: > - Usage: required > - Value type: <u32> > - Definition: must be 1 > - > -- #size-cells: > - Usage: required > - Value type: <u32> > - Definition: must be 0 > - > -- interrupts: > - Usage: required > - Value type: <prop-encoded-array> > - Definition: specifies the interrupt that indicates a subdevice > - has generated an interrupt (summary interrupt). The > - format of the specifier is defined by the binding document > - describing the node's interrupt parent. > - > -- #interrupt-cells: > - Usage: required > - Value type : <u32> > - Definition: must be 2. Specifies the number of cells needed to encode > - an interrupt source. The 1st cell contains the interrupt > - number. The 2nd cell is the trigger type and level flags > - encoded as follows: > - > - 1 = low-to-high edge triggered > - 2 = high-to-low edge triggered > - 4 = active high level-sensitive > - 8 = active low level-sensitive > - > -- interrupt-controller: > - Usage: required > - Value type: <empty> > - Definition: identifies this node as an interrupt controller > - > -= SUBCOMPONENTS > - > -The PMIC contains multiple independent functions, each described in a subnode. > -The below bindings specify the set of valid subnodes. > - > -== Real-Time Clock > - > -- compatible: > - Usage: required > - Value type: <string> > - Definition: must be one of: > - "qcom,pm8058-rtc" > - "qcom,pm8921-rtc" > - "qcom,pm8941-rtc" > - "qcom,pm8018-rtc" > - > -- reg: > - Usage: required > - Value type: <prop-encoded-array> > - Definition: single entry specifying the base address of the RTC registers > - > -- interrupts: > - Usage: required > - Value type: <prop-encoded-array> > - Definition: single entry specifying the RTC's alarm interrupt > - > -- allow-set-time: > - Usage: optional > - Value type: <empty> > - Definition: indicates that the setting of RTC time is allowed by > - the host CPU > - > -= EXAMPLE > - > - pmicintc: pmic@0 { > - compatible = "qcom,pm8921"; > - interrupts = <104 8>; > - #interrupt-cells = <2>; > - interrupt-controller; > - #address-cells = <1>; > - #size-cells = <0>; > - > - rtc@11d { > - compatible = "qcom,pm8921-rtc"; > - reg = <0x11d>; > - interrupts = <0x27 0>; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml > new file mode 100644 > index 0000000..b4892f1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml > @@ -0,0 +1,108 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm PM8xxx PMIC multi-function devices > + > +maintainers: > + - Lee Jones <lee.jones@linaro.org> While Lee is maintainer of the mfd core, it would be better if this was someone looking out for the Qualcomm PMIC binding specifically. > + > +description: | > + The PM8xxx family of Power Management ICs are used to provide regulated > + voltages and other various functionality to Qualcomm SoCs. > + > +properties: > + compatible: > + enum: > + - qcom,pm8058 > + - qcom,pm8821 > + - qcom,pm8921 > + > + reg: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + interrupts: > + description: | > + Specifies the interrupt that indicates a subdevice has generated an > + interrupt (summary interrupt). > + > + '#interrupt-cells': > + description: | > + Specifies the number of cells needed to encode an interrupt source. > + The 1st cell contains the interrupt number. The 2nd cell is the > + trigger type. > + const: 2 > + > + interrupt-controller: true > + > +patternProperties: > + "rtc@[0-9a-f]+$": Can we somehow link this to individual binding docs instead of listing all the possible functions here? Regards, Bjorn > + type: object > + properties: > + compatible: > + enum: > + - qcom,pm8058-rtc > + - qcom,pm8921-rtc > + - qcom,pm8941-rtc > + - qcom,pm8018-rtc > + > + reg: > + description: Specifies the base address of the RTC registers > + > + interrupts: > + description: Specifies the RTC's alarm interrupts > + > + allow-set-time: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + Indicates that the setting of RTC time is allowed by the host CPU. > + > + required: > + - compatible > + - reg > + - interrupts > + > + additionalProperties: false > + > +required: > + - compatible > + - '#address-cells' > + - '#size-cells' > + - interrupts > + - '#interrupt-cells' > + - interrupt-controller > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/spmi/spmi.h> > + spmi_bus: spmi@c440000 { > + reg = <0x0c440000 0x1100>; > + #address-cells = <2>; > + #size-cells = <0>; > + pmicintc: pmic@0 { > + reg = <0x0 SPMI_USID>; > + compatible = "qcom,pm8921"; > + interrupts = <104 8>; > + #interrupt-cells = <2>; > + interrupt-controller; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pm8921_rtc: rtc@11d { > + compatible = "qcom,pm8921-rtc"; > + reg = <0x11d>; > + interrupts = <0x27 0>; > + }; > + }; > + }; > +... > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
Hi Bjorn, On 2021-03-11 22:33, Bjorn Andersson wrote: > On Thu 11 Mar 01:29 CST 2021, satya priya wrote: > >> Convert pm8xxx rtc bindings from .txt to .yaml format. >> > > Wonderful initiative, thank you! > >> Signed-off-by: satya priya <skakit@codeaurora.org> >> --- >> .../devicetree/bindings/mfd/qcom-pm8xxx.txt | 99 >> ------------------- >> .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 108 >> +++++++++++++++++++++ >> 2 files changed, 108 insertions(+), 99 deletions(-) >> delete mode 100644 >> Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt >> create mode 100644 >> Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml >> >> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt >> b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt >> deleted file mode 100644 >> index 9e5eba4..0000000 >> --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt >> +++ /dev/null >> @@ -1,99 +0,0 @@ >> -Qualcomm PM8xxx PMIC multi-function devices >> - >> -The PM8xxx family of Power Management ICs are used to provide >> regulated >> -voltages and other various functionality to Qualcomm SoCs. >> - >> -= PROPERTIES >> - >> -- compatible: >> - Usage: required >> - Value type: <string> >> - Definition: must be one of: >> - "qcom,pm8058" >> - "qcom,pm8821" >> - "qcom,pm8921" >> - >> -- #address-cells: >> - Usage: required >> - Value type: <u32> >> - Definition: must be 1 >> - >> -- #size-cells: >> - Usage: required >> - Value type: <u32> >> - Definition: must be 0 >> - >> -- interrupts: >> - Usage: required >> - Value type: <prop-encoded-array> >> - Definition: specifies the interrupt that indicates a subdevice >> - has generated an interrupt (summary interrupt). The >> - format of the specifier is defined by the binding document >> - describing the node's interrupt parent. >> - >> -- #interrupt-cells: >> - Usage: required >> - Value type : <u32> >> - Definition: must be 2. Specifies the number of cells needed to >> encode >> - an interrupt source. The 1st cell contains the interrupt >> - number. The 2nd cell is the trigger type and level flags >> - encoded as follows: >> - >> - 1 = low-to-high edge triggered >> - 2 = high-to-low edge triggered >> - 4 = active high level-sensitive >> - 8 = active low level-sensitive >> - >> -- interrupt-controller: >> - Usage: required >> - Value type: <empty> >> - Definition: identifies this node as an interrupt controller >> - >> -= SUBCOMPONENTS >> - >> -The PMIC contains multiple independent functions, each described in a >> subnode. >> -The below bindings specify the set of valid subnodes. >> - >> -== Real-Time Clock >> - >> -- compatible: >> - Usage: required >> - Value type: <string> >> - Definition: must be one of: >> - "qcom,pm8058-rtc" >> - "qcom,pm8921-rtc" >> - "qcom,pm8941-rtc" >> - "qcom,pm8018-rtc" >> - >> -- reg: >> - Usage: required >> - Value type: <prop-encoded-array> >> - Definition: single entry specifying the base address of the RTC >> registers >> - >> -- interrupts: >> - Usage: required >> - Value type: <prop-encoded-array> >> - Definition: single entry specifying the RTC's alarm interrupt >> - >> -- allow-set-time: >> - Usage: optional >> - Value type: <empty> >> - Definition: indicates that the setting of RTC time is allowed by >> - the host CPU >> - >> -= EXAMPLE >> - >> - pmicintc: pmic@0 { >> - compatible = "qcom,pm8921"; >> - interrupts = <104 8>; >> - #interrupt-cells = <2>; >> - interrupt-controller; >> - #address-cells = <1>; >> - #size-cells = <0>; >> - >> - rtc@11d { >> - compatible = "qcom,pm8921-rtc"; >> - reg = <0x11d>; >> - interrupts = <0x27 0>; >> - }; >> - }; >> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml >> b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml >> new file mode 100644 >> index 0000000..b4892f1 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml >> @@ -0,0 +1,108 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm PM8xxx PMIC multi-function devices >> + >> +maintainers: >> + - Lee Jones <lee.jones@linaro.org> > > While Lee is maintainer of the mfd core, it would be better if this was > someone looking out for the Qualcomm PMIC binding specifically. > >> + >> +description: | >> + The PM8xxx family of Power Management ICs are used to provide >> regulated >> + voltages and other various functionality to Qualcomm SoCs. >> + >> +properties: >> + compatible: >> + enum: >> + - qcom,pm8058 >> + - qcom,pm8821 >> + - qcom,pm8921 >> + >> + reg: >> + maxItems: 1 >> + >> + '#address-cells': >> + const: 1 >> + >> + '#size-cells': >> + const: 0 >> + >> + interrupts: >> + description: | >> + Specifies the interrupt that indicates a subdevice has >> generated an >> + interrupt (summary interrupt). >> + >> + '#interrupt-cells': >> + description: | >> + Specifies the number of cells needed to encode an interrupt >> source. >> + The 1st cell contains the interrupt number. The 2nd cell is the >> + trigger type. >> + const: 2 >> + >> + interrupt-controller: true >> + >> +patternProperties: >> + "rtc@[0-9a-f]+$": > > Can we somehow link this to individual binding docs instead of listing > all the possible functions here? > you mean we should split this into two: qcom-pm8xxx.yaml and qcom-pm8xxx-rtc.yaml Please correct me if wrong. > Regards, > Bjorn > >> + type: object >> + properties: >> + compatible: >> + enum: >> + - qcom,pm8058-rtc >> + - qcom,pm8921-rtc >> + - qcom,pm8941-rtc >> + - qcom,pm8018-rtc >> + >> + reg: >> + description: Specifies the base address of the RTC registers >> + >> + interrupts: >> + description: Specifies the RTC's alarm interrupts >> + >> + allow-set-time: >> + $ref: /schemas/types.yaml#/definitions/flag >> + description: >> + Indicates that the setting of RTC time is allowed by the >> host CPU. >> + >> + required: >> + - compatible >> + - reg >> + - interrupts >> + >> + additionalProperties: false >> + >> +required: >> + - compatible >> + - '#address-cells' >> + - '#size-cells' >> + - interrupts >> + - '#interrupt-cells' >> + - interrupt-controller >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/spmi/spmi.h> >> + spmi_bus: spmi@c440000 { >> + reg = <0x0c440000 0x1100>; >> + #address-cells = <2>; >> + #size-cells = <0>; >> + pmicintc: pmic@0 { >> + reg = <0x0 SPMI_USID>; >> + compatible = "qcom,pm8921"; >> + interrupts = <104 8>; >> + #interrupt-cells = <2>; >> + interrupt-controller; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + pm8921_rtc: rtc@11d { >> + compatible = "qcom,pm8921-rtc"; >> + reg = <0x11d>; >> + interrupts = <0x27 0>; >> + }; >> + }; >> + }; >> +... >> -- >> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a >> member >> of Code Aurora Forum, hosted by The Linux Foundation >>
On Wed 07 Apr 10:37 CDT 2021, skakit@codeaurora.org wrote: > Hi Bjorn, > > On 2021-03-11 22:33, Bjorn Andersson wrote: > > On Thu 11 Mar 01:29 CST 2021, satya priya wrote: [..] > > > +patternProperties: > > > + "rtc@[0-9a-f]+$": > > > > Can we somehow link this to individual binding docs instead of listing > > all the possible functions here? > > > > you mean we should split this into two: > qcom-pm8xxx.yaml and qcom-pm8xxx-rtc.yaml > Please correct me if wrong. > Right, I'm worried that it will be quite hard to maintain this document once we start adding all the various pmic blocks to it. So if we somehow can maintain a series of qcom-pm8xxx-<func>.yaml and just ref them into the main PMIC definition. @Rob, can you give us some guidance on how to structure this binding, with the various PMICs described will have some defined subset of a larger set of hardware blocks that's often shared between versions? Regards, Bjorn
On Wed, Apr 7, 2021 at 9:37 PM Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Wed 07 Apr 10:37 CDT 2021, skakit@codeaurora.org wrote: > > > Hi Bjorn, > > > > On 2021-03-11 22:33, Bjorn Andersson wrote: > > > On Thu 11 Mar 01:29 CST 2021, satya priya wrote: > [..] > > > > +patternProperties: > > > > + "rtc@[0-9a-f]+$": > > > > > > Can we somehow link this to individual binding docs instead of listing > > > all the possible functions here? > > > > > > > you mean we should split this into two: > > qcom-pm8xxx.yaml and qcom-pm8xxx-rtc.yaml > > Please correct me if wrong. > > > > Right, I'm worried that it will be quite hard to maintain this document > once we start adding all the various pmic blocks to it. So if we somehow > can maintain a series of qcom-pm8xxx-<func>.yaml and just ref them into > the main PMIC definition. > > @Rob, can you give us some guidance on how to structure this binding, > with the various PMICs described will have some defined subset of a > larger set of hardware blocks that's often shared between versions? How you suggest is good. The only other thing is just 1 complete example rather than a bunch of <func> fragments. Rob
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt deleted file mode 100644 index 9e5eba4..0000000 --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt +++ /dev/null @@ -1,99 +0,0 @@ -Qualcomm PM8xxx PMIC multi-function devices - -The PM8xxx family of Power Management ICs are used to provide regulated -voltages and other various functionality to Qualcomm SoCs. - -= PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058" - "qcom,pm8821" - "qcom,pm8921" - -- #address-cells: - Usage: required - Value type: <u32> - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: <u32> - Definition: must be 0 - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: specifies the interrupt that indicates a subdevice - has generated an interrupt (summary interrupt). The - format of the specifier is defined by the binding document - describing the node's interrupt parent. - -- #interrupt-cells: - Usage: required - Value type : <u32> - Definition: must be 2. Specifies the number of cells needed to encode - an interrupt source. The 1st cell contains the interrupt - number. The 2nd cell is the trigger type and level flags - encoded as follows: - - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - -- interrupt-controller: - Usage: required - Value type: <empty> - Definition: identifies this node as an interrupt controller - -= SUBCOMPONENTS - -The PMIC contains multiple independent functions, each described in a subnode. -The below bindings specify the set of valid subnodes. - -== Real-Time Clock - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058-rtc" - "qcom,pm8921-rtc" - "qcom,pm8941-rtc" - "qcom,pm8018-rtc" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the base address of the RTC registers - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the RTC's alarm interrupt - -- allow-set-time: - Usage: optional - Value type: <empty> - Definition: indicates that the setting of RTC time is allowed by - the host CPU - -= EXAMPLE - - pmicintc: pmic@0 { - compatible = "qcom,pm8921"; - interrupts = <104 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - reg = <0x11d>; - interrupts = <0x27 0>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml new file mode 100644 index 0000000..b4892f1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8xxx PMIC multi-function devices + +maintainers: + - Lee Jones <lee.jones@linaro.org> + +description: | + The PM8xxx family of Power Management ICs are used to provide regulated + voltages and other various functionality to Qualcomm SoCs. + +properties: + compatible: + enum: + - qcom,pm8058 + - qcom,pm8821 + - qcom,pm8921 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + description: | + Specifies the interrupt that indicates a subdevice has generated an + interrupt (summary interrupt). + + '#interrupt-cells': + description: | + Specifies the number of cells needed to encode an interrupt source. + The 1st cell contains the interrupt number. The 2nd cell is the + trigger type. + const: 2 + + interrupt-controller: true + +patternProperties: + "rtc@[0-9a-f]+$": + type: object + properties: + compatible: + enum: + - qcom,pm8058-rtc + - qcom,pm8921-rtc + - qcom,pm8941-rtc + - qcom,pm8018-rtc + + reg: + description: Specifies the base address of the RTC registers + + interrupts: + description: Specifies the RTC's alarm interrupts + + allow-set-time: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that the setting of RTC time is allowed by the host CPU. + + required: + - compatible + - reg + - interrupts + + additionalProperties: false + +required: + - compatible + - '#address-cells' + - '#size-cells' + - interrupts + - '#interrupt-cells' + - interrupt-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + spmi_bus: spmi@c440000 { + reg = <0x0c440000 0x1100>; + #address-cells = <2>; + #size-cells = <0>; + pmicintc: pmic@0 { + reg = <0x0 SPMI_USID>; + compatible = "qcom,pm8921"; + interrupts = <104 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pm8921_rtc: rtc@11d { + compatible = "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts = <0x27 0>; + }; + }; + }; +...
Convert pm8xxx rtc bindings from .txt to .yaml format. Signed-off-by: satya priya <skakit@codeaurora.org> --- .../devicetree/bindings/mfd/qcom-pm8xxx.txt | 99 ------------------- .../devicetree/bindings/mfd/qcom-pm8xxx.yaml | 108 +++++++++++++++++++++ 2 files changed, 108 insertions(+), 99 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml