| Message ID | 20210318085026.30475-1-ykaukab@suse.de (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 804741ac7b9f2fdebe3740cb0579cb8d94d49e60 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net] netsec: restore phy power state after controller reset | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | success | CCed 7 of 7 maintainers |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 20 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
| netdev/header_inline | success | Link |
Hello: This patch was applied to netdev/net.git (refs/heads/master): On Thu, 18 Mar 2021 09:50:26 +0100 you wrote: > Since commit 8e850f25b581 ("net: socionext: Stop PHY before resetting > netsec") netsec_netdev_init() power downs phy before resetting the > controller. However, the state is not restored once the reset is > complete. As a result it is not possible to bring up network on a > platform with Broadcom BCM5482 phy. > > Fix the issue by restoring phy power state after controller reset is > complete. > > [...] Here is the summary with links: - [net] netsec: restore phy power state after controller reset https://git.kernel.org/netdev/net/c/804741ac7b9f You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 3c53051bdacf..200785e703c8 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -1715,14 +1715,17 @@ static int netsec_netdev_init(struct net_device *ndev) goto err1; /* set phy power down */ - data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR) | - BMCR_PDOWN; - netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data); + data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR); + netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, + data | BMCR_PDOWN); ret = netsec_reset_hardware(priv, true); if (ret) goto err2; + /* Restore phy power state */ + netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data); + spin_lock_init(&priv->desc_ring[NETSEC_RING_TX].lock); spin_lock_init(&priv->desc_ring[NETSEC_RING_RX].lock);
Since commit 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") netsec_netdev_init() power downs phy before resetting the controller. However, the state is not restored once the reset is complete. As a result it is not possible to bring up network on a platform with Broadcom BCM5482 phy. Fix the issue by restoring phy power state after controller reset is complete. Fixes: 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") Cc: stable@vger.kernel.org Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> --- drivers/net/ethernet/socionext/netsec.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)