diff mbox series

[net-next,V2,1/2] net: dsa: bcm_sf2: add function finding RGMII register

Message ID 20210318080143.32449-1-zajec5@gmail.com (mailing list archive)
State Accepted
Commit 55cfeb396965c3906a84d09a9c487d065e37773b
Delegated to: Netdev Maintainers
Headers show
Series [net-next,V2,1/2] net: dsa: bcm_sf2: add function finding RGMII register | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 123 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Rafał Miłecki March 18, 2021, 8:01 a.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

Simple macro like REG_RGMII_CNTRL_P() is insufficient as:
1. It doesn't validate port argument
2. It doesn't support chipsets with non-lineral RGMII regs layout

Missing port validation could result in getting register offset from out
of array. Random memory -> random offset -> random reads/writes. It
affected e.g. BCM4908 for REG_RGMII_CNTRL_P(7).

Fixes: a78e86ed586d ("net: dsa: bcm_sf2: Prepare for different register layouts")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/net/dsa/bcm_sf2.c      | 49 +++++++++++++++++++++++++++++-----
 drivers/net/dsa/bcm_sf2_regs.h |  2 --
 2 files changed, 42 insertions(+), 9 deletions(-)

Comments

Florian Fainelli March 18, 2021, 9:33 p.m. UTC | #1 
On 3/18/2021 1:01 AM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Simple macro like REG_RGMII_CNTRL_P() is insufficient as:
> 1. It doesn't validate port argument
> 2. It doesn't support chipsets with non-lineral RGMII regs layout
> 
> Missing port validation could result in getting register offset from out
> of array. Random memory -> random offset -> random reads/writes. It
> affected e.g. BCM4908 for REG_RGMII_CNTRL_P(7).
> 
> Fixes: a78e86ed586d ("net: dsa: bcm_sf2: Prepare for different register layouts")
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
patchwork-bot+netdevbpf@kernel.org March 18, 2021, 10 p.m. UTC | #2 
Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Thu, 18 Mar 2021 09:01:42 +0100 you wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Simple macro like REG_RGMII_CNTRL_P() is insufficient as:
> 1. It doesn't validate port argument
> 2. It doesn't support chipsets with non-lineral RGMII regs layout
> 
> Missing port validation could result in getting register offset from out
> of array. Random memory -> random offset -> random reads/writes. It
> affected e.g. BCM4908 for REG_RGMII_CNTRL_P(7).
> 
> [...]

Here is the summary with links:
  - [net-next,V2,1/2] net: dsa: bcm_sf2: add function finding RGMII register
    https://git.kernel.org/netdev/net-next/c/55cfeb396965
  - [net-next,V2,2/2] net: dsa: bcm_sf2: fix BCM4908 RGMII reg(s)
    https://git.kernel.org/netdev/net-next/c/6859d9154934

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 3708cd8d7be8..4261a06ad050 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -32,6 +32,31 @@ 
 #include "b53/b53_priv.h"
 #include "b53/b53_regs.h"
 
+static u16 bcm_sf2_reg_rgmii_cntrl(struct bcm_sf2_priv *priv, int port)
+{
+	switch (priv->type) {
+	case BCM4908_DEVICE_ID:
+		/* TODO */
+		break;
+	default:
+		switch (port) {
+		case 0:
+			return REG_RGMII_0_CNTRL;
+		case 1:
+			return REG_RGMII_1_CNTRL;
+		case 2:
+			return REG_RGMII_2_CNTRL;
+		default:
+			break;
+		}
+	}
+
+	WARN_ONCE(1, "Unsupported port %d\n", port);
+
+	/* RO fallback reg */
+	return REG_SWITCH_STATUS;
+}
+
 /* Return the number of active ports, not counting the IMP (CPU) port */
 static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds)
 {
@@ -693,6 +718,7 @@  static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	u32 id_mode_dis = 0, port_mode;
+	u32 reg_rgmii_ctrl;
 	u32 reg;
 
 	if (port == core_readl(priv, CORE_IMP0_PRT_ID))
@@ -716,10 +742,12 @@  static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
 		return;
 	}
 
+	reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+
 	/* Clear id_mode_dis bit, and the existing port mode, let
 	 * RGMII_MODE_EN bet set by mac_link_{up,down}
 	 */
-	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+	reg = reg_readl(priv, reg_rgmii_ctrl);
 	reg &= ~ID_MODE_DIS;
 	reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
 
@@ -727,13 +755,14 @@  static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
 	if (id_mode_dis)
 		reg |= ID_MODE_DIS;
 
-	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+	reg_writel(priv, reg, reg_rgmii_ctrl);
 }
 
 static void bcm_sf2_sw_mac_link_set(struct dsa_switch *ds, int port,
 				    phy_interface_t interface, bool link)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+	u32 reg_rgmii_ctrl;
 	u32 reg;
 
 	if (!phy_interface_mode_is_rgmii(interface) &&
@@ -741,13 +770,15 @@  static void bcm_sf2_sw_mac_link_set(struct dsa_switch *ds, int port,
 	    interface != PHY_INTERFACE_MODE_REVMII)
 		return;
 
+	reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+
 	/* If the link is down, just disable the interface to conserve power */
-	reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+	reg = reg_readl(priv, reg_rgmii_ctrl);
 	if (link)
 		reg |= RGMII_MODE_EN;
 	else
 		reg &= ~RGMII_MODE_EN;
-	reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+	reg_writel(priv, reg, reg_rgmii_ctrl);
 }
 
 static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
@@ -781,11 +812,15 @@  static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	struct ethtool_eee *p = &priv->dev->ports[port].eee;
-	u32 reg, offset;
 
 	bcm_sf2_sw_mac_link_set(ds, port, interface, true);
 
 	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
+		u32 reg_rgmii_ctrl;
+		u32 reg, offset;
+
+		reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+
 		if (priv->type == BCM4908_DEVICE_ID ||
 		    priv->type == BCM7445_DEVICE_ID)
 			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
@@ -796,7 +831,7 @@  static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
 		    interface == PHY_INTERFACE_MODE_RGMII_TXID ||
 		    interface == PHY_INTERFACE_MODE_MII ||
 		    interface == PHY_INTERFACE_MODE_REVMII) {
-			reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+			reg = reg_readl(priv, reg_rgmii_ctrl);
 			reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
 
 			if (tx_pause)
@@ -804,7 +839,7 @@  static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
 			if (rx_pause)
 				reg |= RX_PAUSE_EN;
 
-			reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+			reg_writel(priv, reg, reg_rgmii_ctrl);
 		}
 
 		reg = SW_OVERRIDE | LINK_STS;
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index e297b09411f3..3d5515fe43cb 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -55,8 +55,6 @@  enum bcm_sf2_reg_offs {
 #define CROSSBAR_BCM4908_EXT_GPHY4	1
 #define CROSSBAR_BCM4908_EXT_RGMII	2
 
-#define REG_RGMII_CNTRL_P(x)		(REG_RGMII_0_CNTRL + (x))
-
 /* Relative to REG_RGMII_CNTRL */
 #define  RGMII_MODE_EN			(1 << 0)
 #define  ID_MODE_DIS			(1 << 1)