diff mbox series

[V3,4/5] net: ethernet: ravb: Enable optional refclk

Message ID 20210224115146.9131-4-aford173@gmail.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series [V3,1/5] dt-bindings: net: renesas,etheravb: Add additional clocks | expand

Commit Message

Adam Ford Feb. 24, 2021, 11:51 a.m. UTC 
For devices that use a programmable clock for the AVB reference clock,
the driver may need to enable them.  Add code to find the optional clock
and enable it when available.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V3:  Change 'avb' to 'AVB'
     Remove unnessary else statement and pointer maniupluation when 
     enabling the refclock. 
     Add disable_unprepare call in remove funtion.
      
V2:  The previous patch to fetch the fclk was dropped.  In its place
     is code to enable the refclk

Comments

Andrew Lunn Feb. 24, 2021, 1:47 p.m. UTC | #1 
> @@ -2260,6 +2267,9 @@ static int ravb_remove(struct platform_device *pdev)
>  	if (priv->chip_id != RCAR_GEN2)
>  		ravb_ptp_stop(ndev);
>  
> +	if (priv->refclk)
> +		clk_disable_unprepare(priv->refclk);
> +

Hi Adam

You don't need the if (). The clk API is happy with a NULL pointer and
will do the right thing. Otherwise:

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Geert Uytterhoeven March 4, 2021, 8:08 a.m. UTC | #2 
Hi Adam,

On Wed, Feb 24, 2021 at 12:52 PM Adam Ford <aford173@gmail.com> wrote:
> For devices that use a programmable clock for the AVB reference clock,
> the driver may need to enable them.  Add code to find the optional clock
> and enable it when available.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>

Thanks for your patch!

> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
> @@ -2148,6 +2148,13 @@ static int ravb_probe(struct platform_device *pdev)
>                 goto out_release;
>         }
>
> +       priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
> +       if (IS_ERR(priv->refclk)) {
> +               error = PTR_ERR(priv->refclk);
> +               goto out_release;
> +       }
> +       clk_prepare_enable(priv->refclk);
> +

Shouldn't the reference clock be disabled in case of any failure below?

>         ndev->max_mtu = 2048 - (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN);
>         ndev->min_mtu = ETH_MIN_MTU;
>
> @@ -2260,6 +2267,9 @@ static int ravb_remove(struct platform_device *pdev)
>         if (priv->chip_id != RCAR_GEN2)
>                 ravb_ptp_stop(ndev);
>
> +       if (priv->refclk)
> +               clk_disable_unprepare(priv->refclk);
> +
>         dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
>                           priv->desc_bat_dma);
>         /* Set reset mode */

Gr{oetje,eeting}s,

                        Geert
Adam Ford March 29, 2021, 12:45 p.m. UTC | #3 
On Thu, Mar 4, 2021 at 2:08 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> Hi Adam,
>
> On Wed, Feb 24, 2021 at 12:52 PM Adam Ford <aford173@gmail.com> wrote:
> > For devices that use a programmable clock for the AVB reference clock,
> > the driver may need to enable them.  Add code to find the optional clock
> > and enable it when available.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
>
> Thanks for your patch!
>
> > --- a/drivers/net/ethernet/renesas/ravb_main.c
> > +++ b/drivers/net/ethernet/renesas/ravb_main.c
> > @@ -2148,6 +2148,13 @@ static int ravb_probe(struct platform_device *pdev)
> >                 goto out_release;
> >         }
> >
> > +       priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
> > +       if (IS_ERR(priv->refclk)) {
> > +               error = PTR_ERR(priv->refclk);
> > +               goto out_release;
> > +       }
> > +       clk_prepare_enable(priv->refclk);
> > +
>
> Shouldn't the reference clock be disabled in case of any failure below?
>
I'll generate a V4.

Should I just regenerate this patch since it seems like the rest are
OK, or should I regenerate the whole series?

adam
> >         ndev->max_mtu = 2048 - (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN);
> >         ndev->min_mtu = ETH_MIN_MTU;
> >
> > @@ -2260,6 +2267,9 @@ static int ravb_remove(struct platform_device *pdev)
> >         if (priv->chip_id != RCAR_GEN2)
> >                 ravb_ptp_stop(ndev);
> >
> > +       if (priv->refclk)
> > +               clk_disable_unprepare(priv->refclk);
> > +
> >         dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
> >                           priv->desc_bat_dma);
> >         /* Set reset mode */
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
Geert Uytterhoeven March 29, 2021, 1:08 p.m. UTC | #4 
Hi Adam,

On Mon, Mar 29, 2021 at 2:45 PM Adam Ford <aford173@gmail.com> wrote:
> On Thu, Mar 4, 2021 at 2:08 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> > On Wed, Feb 24, 2021 at 12:52 PM Adam Ford <aford173@gmail.com> wrote:
> > > For devices that use a programmable clock for the AVB reference clock,
> > > the driver may need to enable them.  Add code to find the optional clock
> > > and enable it when available.
> > >
> > > Signed-off-by: Adam Ford <aford173@gmail.com>
> >
> > Thanks for your patch!
> >
> > > --- a/drivers/net/ethernet/renesas/ravb_main.c
> > > +++ b/drivers/net/ethernet/renesas/ravb_main.c
> > > @@ -2148,6 +2148,13 @@ static int ravb_probe(struct platform_device *pdev)
> > >                 goto out_release;
> > >         }
> > >
> > > +       priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
> > > +       if (IS_ERR(priv->refclk)) {
> > > +               error = PTR_ERR(priv->refclk);
> > > +               goto out_release;
> > > +       }
> > > +       clk_prepare_enable(priv->refclk);
> > > +
> >
> > Shouldn't the reference clock be disabled in case of any failure below?
> >
> I'll generate a V4.
>
> Should I just regenerate this patch since it seems like the rest are
> OK, or should I regenerate the whole series?

As the DT bindings haven't been applied yet, I think it would be
best if you would send a v4 with just the patches for the netdev
tree (i.e. DT bindings patch 1 and driver patch 4).

I will take the DT patches from this series, once the bindings have been
accepted.

Thank you!

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index 7453b17a37a2..ff363797bd2b 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -994,6 +994,7 @@  struct ravb_private {
 	struct platform_device *pdev;
 	void __iomem *addr;
 	struct clk *clk;
+	struct clk *refclk;
 	struct mdiobb_ctrl mdiobb;
 	u32 num_rx_ring[NUM_RX_QUEUE];
 	u32 num_tx_ring[NUM_TX_QUEUE];
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index bd30505fbc57..614448e6eb24 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2148,6 +2148,13 @@  static int ravb_probe(struct platform_device *pdev)
 		goto out_release;
 	}
 
+	priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
+	if (IS_ERR(priv->refclk)) {
+		error = PTR_ERR(priv->refclk);
+		goto out_release;
+	}
+	clk_prepare_enable(priv->refclk);
+
 	ndev->max_mtu = 2048 - (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN);
 	ndev->min_mtu = ETH_MIN_MTU;
 
@@ -2260,6 +2267,9 @@  static int ravb_remove(struct platform_device *pdev)
 	if (priv->chip_id != RCAR_GEN2)
 		ravb_ptp_stop(ndev);
 
+	if (priv->refclk)
+		clk_disable_unprepare(priv->refclk);
+
 	dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
 			  priv->desc_bat_dma);
 	/* Set reset mode */