@@ -26,12 +26,127 @@
#include "rcar-cpg-lib.h"
#include "rcar-gen3-cpg.h"
-#define CPG_PLL0CR 0x00d8
+#define CPG_PLLECR 0x00d0 /* PLL Enable Control Register */
+
+#define CPG_PLLECR_PLLST(n) BIT(8 + (n)) /* PLLn Circuit Status */
+
+#define CPG_PLL0CR 0x00d8 /* PLLn Control Registers */
#define CPG_PLL2CR 0x002c
#define CPG_PLL4CR 0x01f4
+#define CPG_PLLnCR_STC_MASK GENMASK(30, 24) /* PLL Circuit Mult. Ratio */
+
#define CPG_RCKCR_CKSEL BIT(15) /* RCLK Clock Source Select */
+/* PLL Clocks */
+struct cpg_pll_clk {
+ struct clk_hw hw;
+ void __iomem *pllcr_reg;
+ void __iomem *pllecr_reg;
+ unsigned int fixed_mult;
+ u32 pllecr_pllst_mask;
+};
+
+#define to_pll_clk(_hw) container_of(_hw, struct cpg_pll_clk, hw)
+
+static unsigned long cpg_pll_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct cpg_pll_clk *pll_clk = to_pll_clk(hw);
+ unsigned int mult;
+ u32 val;
+
+ val = readl(pll_clk->pllcr_reg) & CPG_PLLnCR_STC_MASK;
+ mult = (val >> __ffs(CPG_PLLnCR_STC_MASK)) + 1;
+
+ return parent_rate * mult * pll_clk->fixed_mult;
+}
+
+static int cpg_pll_clk_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct cpg_pll_clk *pll_clk = to_pll_clk(hw);
+ unsigned int min_mult, max_mult, mult;
+ unsigned long prate;
+
+ prate = req->best_parent_rate * pll_clk->fixed_mult;
+ min_mult = max(div64_ul(req->min_rate, prate), 1ULL);
+ max_mult = min(div64_ul(req->max_rate, prate), 128ULL);
+ if (max_mult < min_mult)
+ return -EINVAL;
+
+ mult = DIV_ROUND_CLOSEST_ULL(req->rate, prate);
+ mult = clamp(mult, min_mult, max_mult);
+
+ req->rate = prate * mult;
+ return 0;
+}
+
+static int cpg_pll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct cpg_pll_clk *pll_clk = to_pll_clk(hw);
+ unsigned int mult, i;
+ u32 val;
+
+ mult = DIV_ROUND_CLOSEST_ULL(rate, parent_rate * pll_clk->fixed_mult);
+ mult = clamp(mult, 1U, 128U);
+
+ val = readl(pll_clk->pllcr_reg);
+ val &= ~CPG_PLLnCR_STC_MASK;
+ val |= (mult - 1) << __ffs(CPG_PLLnCR_STC_MASK);
+ writel(val, pll_clk->pllcr_reg);
+
+ for (i = 1000; i; i--) {
+ if (readl(pll_clk->pllecr_reg) & pll_clk->pllecr_pllst_mask)
+ return 0;
+
+ cpu_relax();
+ }
+
+ return -ETIMEDOUT;
+}
+
+static const struct clk_ops cpg_pll_clk_ops = {
+ .recalc_rate = cpg_pll_clk_recalc_rate,
+ .determine_rate = cpg_pll_clk_determine_rate,
+ .set_rate = cpg_pll_clk_set_rate,
+};
+
+static struct clk * __init cpg_pll_clk_register(const char *name,
+ const char *parent_name,
+ void __iomem *base,
+ unsigned int mult,
+ unsigned int offset,
+ unsigned int index)
+
+{
+ struct cpg_pll_clk *pll_clk;
+ struct clk_init_data init = {};
+ struct clk *clk;
+
+ pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
+ if (!pll_clk)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &cpg_pll_clk_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pll_clk->hw.init = &init;
+ pll_clk->pllcr_reg = base + offset;
+ pll_clk->pllecr_reg = base + CPG_PLLECR;
+ pll_clk->fixed_mult = mult; /* PLL refclk x (setting + 1) x mult */
+ pll_clk->pllecr_pllst_mask = CPG_PLLECR_PLLST(index);
+
+ clk = clk_register(NULL, &pll_clk->hw);
+ if (IS_ERR(clk))
+ kfree(pll_clk);
+
+ return clk;
+}
+
/*
* Z Clock & Z2 Clock
*
@@ -314,16 +429,13 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
case CLK_TYPE_GEN3_PLL0:
/*
- * PLL0 is a configurable multiplier clock. Register it as a
- * fixed factor clock for now as there's no generic multiplier
- * clock implementation and we currently have no need to change
- * the multiplier value.
+ * PLL0 is implemented as a custom clock, to change the
+ * multiplier when cpufreq changes between normal and boost
+ * modes.
*/
- value = readl(base + CPG_PLL0CR);
- mult = (((value >> 24) & 0x7f) + 1) * 2;
- if (cpg_quirks & PLL_ERRATA)
- mult *= 2;
- break;
+ mult = (cpg_quirks & PLL_ERRATA) ? 4 : 2;
+ return cpg_pll_clk_register(core->name, __clk_get_name(parent),
+ base, mult, CPG_PLL0CR, 0);
case CLK_TYPE_GEN3_PLL1:
mult = cpg_pll_config->pll1_mult;
@@ -332,16 +444,13 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
case CLK_TYPE_GEN3_PLL2:
/*
- * PLL2 is a configurable multiplier clock. Register it as a
- * fixed factor clock for now as there's no generic multiplier
- * clock implementation and we currently have no need to change
- * the multiplier value.
+ * PLL2 is implemented as a custom clock, to change the
+ * multiplier when cpufreq changes between normal and boost
+ * modes.
*/
- value = readl(base + CPG_PLL2CR);
- mult = (((value >> 24) & 0x7f) + 1) * 2;
- if (cpg_quirks & PLL_ERRATA)
- mult *= 2;
- break;
+ mult = (cpg_quirks & PLL_ERRATA) ? 4 : 2;
+ return cpg_pll_clk_register(core->name, __clk_get_name(parent),
+ base, mult, CPG_PLL2CR, 2);
case CLK_TYPE_GEN3_PLL3:
mult = cpg_pll_config->pll3_mult;
Currently the PLLs are modeled as fixed factor clocks, based on initial settings. However, enabling CPU boost clock rates requires increasing the PLL clock rates. Add a custom clock driver to model the PLL clocks. This will allow the Z (CPU) clock driver to request changing the PLL clock rate. Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/clk/renesas/rcar-gen3-cpg.c | 147 ++++++++++++++++++++++++---- 1 file changed, 128 insertions(+), 19 deletions(-)