Message ID | 20210330113235.2767216-1-lucjan.lucjanov@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | init: add support for zstd compressed modules | expand |
On Tue, Mar 30, 2021 at 01:32:35PM +0200, Piotr Gorski wrote: > kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. > > Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> > --- > Makefile | 7 +++++-- > init/Kconfig | 9 ++++++--- > 2 files changed, 11 insertions(+), 5 deletions(-) > > diff --git a/Makefile b/Makefile > index 5160ff8903c1..82f4f4cc2955 100644 > --- a/Makefile > +++ b/Makefile > @@ -1156,8 +1156,8 @@ endif # INSTALL_MOD_STRIP > export mod_strip_cmd > > # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed > -# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP > -# or CONFIG_MODULE_COMPRESS_XZ. > +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP, > +# CONFIG_MODULE_COMPRESS_XZ, or CONFIG_MODULE_COMPRESS_ZSTD. > > mod_compress_cmd = true > ifdef CONFIG_MODULE_COMPRESS > @@ -1167,6 +1167,9 @@ ifdef CONFIG_MODULE_COMPRESS > ifdef CONFIG_MODULE_COMPRESS_XZ > mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f > endif # CONFIG_MODULE_COMPRESS_XZ > + ifdef CONFIG_MODULE_COMPRESS_ZSTD > + mod_compress_cmd = $(ZSTD) -T0 --rm -f -q > + endif # CONFIG_MODULE_COMPRESS_ZSTD > endif # CONFIG_MODULE_COMPRESS > export mod_compress_cmd > > diff --git a/init/Kconfig b/init/Kconfig > index 8c2cfd88f6ef..86a452bc2747 100644 > --- a/init/Kconfig > +++ b/init/Kconfig > @@ -2250,8 +2250,8 @@ config MODULE_COMPRESS > bool "Compress modules on installation" > help > > - Compresses kernel modules when 'make modules_install' is run; gzip or > - xz depending on "Compression algorithm" below. > + Compresses kernel modules when 'make modules_install' is run; gzip, > + xz, or zstd depending on "Compression algorithm" below. > > module-init-tools MAY support gzip, and kmod MAY support gzip and xz. > > @@ -2273,7 +2273,7 @@ choice > This determines which sort of compression will be used during > 'make modules_install'. > > - GZIP (default) and XZ are supported. > + GZIP (default), XZ, and ZSTD are supported. > > config MODULE_COMPRESS_GZIP > bool "GZIP" > @@ -2281,6 +2281,9 @@ config MODULE_COMPRESS_GZIP > config MODULE_COMPRESS_XZ > bool "XZ" > > +config MODULE_COMPRESS_ZSTD > + bool "ZSTD" > + > endchoice > > config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS > -- > 2.31.0.97.g1424303384 > Great! Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> This works perfectly fine in Arch Linux if accompanied by the following mkinitcpio amendment: [1]. I'm also Cc'ing other people from get_maintainers output just to make this submission more visible. Thanks. [1] https://github.com/archlinux/mkinitcpio/pull/43
> On Mar 30, 2021, at 4:50 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: > > On Tue, Mar 30, 2021 at 01:32:35PM +0200, Piotr Gorski wrote: >> kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. >> >> Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> >> --- >> Makefile | 7 +++++-- >> init/Kconfig | 9 ++++++--- >> 2 files changed, 11 insertions(+), 5 deletions(-) >> >> diff --git a/Makefile b/Makefile >> index 5160ff8903c1..82f4f4cc2955 100644 >> --- a/Makefile >> +++ b/Makefile >> @@ -1156,8 +1156,8 @@ endif # INSTALL_MOD_STRIP >> export mod_strip_cmd >> >> # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed >> -# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP >> -# or CONFIG_MODULE_COMPRESS_XZ. >> +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP, >> +# CONFIG_MODULE_COMPRESS_XZ, or CONFIG_MODULE_COMPRESS_ZSTD. >> >> mod_compress_cmd = true >> ifdef CONFIG_MODULE_COMPRESS >> @@ -1167,6 +1167,9 @@ ifdef CONFIG_MODULE_COMPRESS >> ifdef CONFIG_MODULE_COMPRESS_XZ >> mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f >> endif # CONFIG_MODULE_COMPRESS_XZ >> + ifdef CONFIG_MODULE_COMPRESS_ZSTD >> + mod_compress_cmd = $(ZSTD) -T0 --rm -f -q This will use the default zstd level, level 3. I think it would make more sense to use a high compression level. Level 19 would probably be a good choice. That will choose a window size of up to 8MB, meaning the decompressor needs to allocate that much memory. If that is unacceptable, you could use `zstd -T0 --rm -f -q -19 --zstd=wlog=21`, which will use a window size of up to 2MB, to match the XZ command. Note that if the file is smaller than the window size, it will be shrunk to the smallest power of two at least as large as the file. Best, Nick Terrell >> + endif # CONFIG_MODULE_COMPRESS_ZSTD >> endif # CONFIG_MODULE_COMPRESS >> export mod_compress_cmd >> >> diff --git a/init/Kconfig b/init/Kconfig >> index 8c2cfd88f6ef..86a452bc2747 100644 >> --- a/init/Kconfig >> +++ b/init/Kconfig >> @@ -2250,8 +2250,8 @@ config MODULE_COMPRESS >> bool "Compress modules on installation" >> help >> >> - Compresses kernel modules when 'make modules_install' is run; gzip or >> - xz depending on "Compression algorithm" below. >> + Compresses kernel modules when 'make modules_install' is run; gzip, >> + xz, or zstd depending on "Compression algorithm" below. >> >> module-init-tools MAY support gzip, and kmod MAY support gzip and xz. >> >> @@ -2273,7 +2273,7 @@ choice >> This determines which sort of compression will be used during >> 'make modules_install'. >> >> - GZIP (default) and XZ are supported. >> + GZIP (default), XZ, and ZSTD are supported. >> >> config MODULE_COMPRESS_GZIP >> bool "GZIP" >> @@ -2281,6 +2281,9 @@ config MODULE_COMPRESS_GZIP >> config MODULE_COMPRESS_XZ >> bool "XZ" >> >> +config MODULE_COMPRESS_ZSTD >> + bool "ZSTD" >> + >> endchoice >> >> config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS >> -- >> 2.31.0.97.g1424303384 >> > > Great! > > Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> > > This works perfectly fine in Arch Linux if accompanied by the > following mkinitcpio amendment: [1]. > > I'm also Cc'ing other people from get_maintainers output just > to make this submission more visible. > > Thanks. > > [1] https://github.com/archlinux/mkinitcpio/pull/43 > > -- > Oleksandr Natalenko (post-factum)
Hello. On Wed, Mar 31, 2021 at 05:39:25PM +0000, Nick Terrell wrote: > > > > On Mar 30, 2021, at 4:50 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: > > > > On Tue, Mar 30, 2021 at 01:32:35PM +0200, Piotr Gorski wrote: > >> kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. > >> > >> Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> > >> --- > >> Makefile | 7 +++++-- > >> init/Kconfig | 9 ++++++--- > >> 2 files changed, 11 insertions(+), 5 deletions(-) > >> > >> diff --git a/Makefile b/Makefile > >> index 5160ff8903c1..82f4f4cc2955 100644 > >> --- a/Makefile > >> +++ b/Makefile > >> @@ -1156,8 +1156,8 @@ endif # INSTALL_MOD_STRIP > >> export mod_strip_cmd > >> > >> # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed > >> -# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP > >> -# or CONFIG_MODULE_COMPRESS_XZ. > >> +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP, > >> +# CONFIG_MODULE_COMPRESS_XZ, or CONFIG_MODULE_COMPRESS_ZSTD. > >> > >> mod_compress_cmd = true > >> ifdef CONFIG_MODULE_COMPRESS > >> @@ -1167,6 +1167,9 @@ ifdef CONFIG_MODULE_COMPRESS > >> ifdef CONFIG_MODULE_COMPRESS_XZ > >> mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f > >> endif # CONFIG_MODULE_COMPRESS_XZ > >> + ifdef CONFIG_MODULE_COMPRESS_ZSTD > >> + mod_compress_cmd = $(ZSTD) -T0 --rm -f -q > > This will use the default zstd level, level 3. I think it would make more sense to use a high > compression level. Level 19 would probably be a good choice. That will choose a window > size of up to 8MB, meaning the decompressor needs to allocate that much memory. If that > is unacceptable, you could use `zstd -T0 --rm -f -q -19 --zstd=wlog=21`, which will use a > window size of up to 2MB, to match the XZ command. Note that if the file is smaller than > the window size, it will be shrunk to the smallest power of two at least as large as the file. Please no. We've already done that with initramfs in Arch, and it increased the time to generate it enormously. I understand that building a kernel is a more rare operation than regenerating initramfs, but still I'd go against hard-coding the level. And if it should be specified anyway, I'd opt in for an explicit configuration option. Remember, not all the kernel are built on build farms... FWIW, Piotr originally used level 9 which worked okay, but I insisted on sending the patch initially without specifying level at all like it is done for other compressors. If this is a wrong approach, then oh meh, mea culpa ;). Whatever default non-standard compression level you choose, I'm fine as long as I can change it without editing Makefile. Thanks! > > Best, > Nick Terrell > > >> + endif # CONFIG_MODULE_COMPRESS_ZSTD > >> endif # CONFIG_MODULE_COMPRESS > >> export mod_compress_cmd > >> > >> diff --git a/init/Kconfig b/init/Kconfig > >> index 8c2cfd88f6ef..86a452bc2747 100644 > >> --- a/init/Kconfig > >> +++ b/init/Kconfig > >> @@ -2250,8 +2250,8 @@ config MODULE_COMPRESS > >> bool "Compress modules on installation" > >> help > >> > >> - Compresses kernel modules when 'make modules_install' is run; gzip or > >> - xz depending on "Compression algorithm" below. > >> + Compresses kernel modules when 'make modules_install' is run; gzip, > >> + xz, or zstd depending on "Compression algorithm" below. > >> > >> module-init-tools MAY support gzip, and kmod MAY support gzip and xz. > >> > >> @@ -2273,7 +2273,7 @@ choice > >> This determines which sort of compression will be used during > >> 'make modules_install'. > >> > >> - GZIP (default) and XZ are supported. > >> + GZIP (default), XZ, and ZSTD are supported. > >> > >> config MODULE_COMPRESS_GZIP > >> bool "GZIP" > >> @@ -2281,6 +2281,9 @@ config MODULE_COMPRESS_GZIP > >> config MODULE_COMPRESS_XZ > >> bool "XZ" > >> > >> +config MODULE_COMPRESS_ZSTD > >> + bool "ZSTD" > >> + > >> endchoice > >> > >> config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS > >> -- > >> 2.31.0.97.g1424303384 > >> > > > > Great! > > > > Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> > > > > This works perfectly fine in Arch Linux if accompanied by the > > following mkinitcpio amendment: [1]. > > > > I'm also Cc'ing other people from get_maintainers output just > > to make this submission more visible. > > > > Thanks. > > > > [1] https://github.com/archlinux/mkinitcpio/pull/43 > > > > -- > > Oleksandr Natalenko (post-factum) >
> On Mar 31, 2021, at 10:48 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: > > Hello. > > On Wed, Mar 31, 2021 at 05:39:25PM +0000, Nick Terrell wrote: >> >> >>> On Mar 30, 2021, at 4:50 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: >>> >>> On Tue, Mar 30, 2021 at 01:32:35PM +0200, Piotr Gorski wrote: >>>> kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. >>>> >>>> Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> >>>> --- >>>> Makefile | 7 +++++-- >>>> init/Kconfig | 9 ++++++--- >>>> 2 files changed, 11 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/Makefile b/Makefile >>>> index 5160ff8903c1..82f4f4cc2955 100644 >>>> --- a/Makefile >>>> +++ b/Makefile >>>> @@ -1156,8 +1156,8 @@ endif # INSTALL_MOD_STRIP >>>> export mod_strip_cmd >>>> >>>> # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed >>>> -# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP >>>> -# or CONFIG_MODULE_COMPRESS_XZ. >>>> +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP, >>>> +# CONFIG_MODULE_COMPRESS_XZ, or CONFIG_MODULE_COMPRESS_ZSTD. >>>> >>>> mod_compress_cmd = true >>>> ifdef CONFIG_MODULE_COMPRESS >>>> @@ -1167,6 +1167,9 @@ ifdef CONFIG_MODULE_COMPRESS >>>> ifdef CONFIG_MODULE_COMPRESS_XZ >>>> mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f >>>> endif # CONFIG_MODULE_COMPRESS_XZ >>>> + ifdef CONFIG_MODULE_COMPRESS_ZSTD >>>> + mod_compress_cmd = $(ZSTD) -T0 --rm -f -q >> >> This will use the default zstd level, level 3. I think it would make more sense to use a high >> compression level. Level 19 would probably be a good choice. That will choose a window >> size of up to 8MB, meaning the decompressor needs to allocate that much memory. If that >> is unacceptable, you could use `zstd -T0 --rm -f -q -19 --zstd=wlog=21`, which will use a >> window size of up to 2MB, to match the XZ command. Note that if the file is smaller than >> the window size, it will be shrunk to the smallest power of two at least as large as the file. > > Please no. We've already done that with initramfs in Arch, and it > increased the time to generate it enormously. > > I understand that building a kernel is a more rare operation than > regenerating initramfs, but still I'd go against hard-coding the level. > And if it should be specified anyway, I'd opt in for an explicit > configuration option. Remember, not all the kernel are built on > build farms... > > FWIW, Piotr originally used level 9 which worked okay, but I insisted > on sending the patch initially without specifying level at all like it is > done for other compressors. If this is a wrong approach, then oh meh, > mea culpa ;). > > Whatever default non-standard compression level you choose, I'm fine > as long as I can change it without editing Makefile. That makes sense to me. I have a deep seated need to compress files as efficiently as possible for widely distributed packages. But, I understand that slow compression significantly impacts build times for quick iteration. I’d be happy with a compression level parameter that defaults to a happy middle. I’m also fine with taking this patch as-is if it is easier, and I can put up another patch that adds a compression level parameter, since I don’t want to block merging this. Best, Nick Terrell > Thanks! > >> >> Best, >> Nick Terrell >> >>>> + endif # CONFIG_MODULE_COMPRESS_ZSTD >>>> endif # CONFIG_MODULE_COMPRESS >>>> export mod_compress_cmd >>>> >>>> diff --git a/init/Kconfig b/init/Kconfig >>>> index 8c2cfd88f6ef..86a452bc2747 100644 >>>> --- a/init/Kconfig >>>> +++ b/init/Kconfig >>>> @@ -2250,8 +2250,8 @@ config MODULE_COMPRESS >>>> bool "Compress modules on installation" >>>> help >>>> >>>> - Compresses kernel modules when 'make modules_install' is run; gzip or >>>> - xz depending on "Compression algorithm" below. >>>> + Compresses kernel modules when 'make modules_install' is run; gzip, >>>> + xz, or zstd depending on "Compression algorithm" below. >>>> >>>> module-init-tools MAY support gzip, and kmod MAY support gzip and xz. >>>> >>>> @@ -2273,7 +2273,7 @@ choice >>>> This determines which sort of compression will be used during >>>> 'make modules_install'. >>>> >>>> - GZIP (default) and XZ are supported. >>>> + GZIP (default), XZ, and ZSTD are supported. >>>> >>>> config MODULE_COMPRESS_GZIP >>>> bool "GZIP" >>>> @@ -2281,6 +2281,9 @@ config MODULE_COMPRESS_GZIP >>>> config MODULE_COMPRESS_XZ >>>> bool "XZ" >>>> >>>> +config MODULE_COMPRESS_ZSTD >>>> + bool "ZSTD" >>>> + >>>> endchoice >>>> >>>> config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS >>>> -- >>>> 2.31.0.97.g1424303384 >>>> >>> >>> Great! >>> >>> Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> >>> >>> This works perfectly fine in Arch Linux if accompanied by the >>> following mkinitcpio amendment: [1]. >>> >>> I'm also Cc'ing other people from get_maintainers output just >>> to make this submission more visible. >>> >>> Thanks. >>> >>> [1] https://github.com/archlinux/mkinitcpio/pull/43 >>> >>> -- >>> Oleksandr Natalenko (post-factum) >> > > -- > Oleksandr Natalenko (post-factum)
Hello. On Wed, Mar 31, 2021 at 07:21:07PM +0000, Nick Terrell wrote: > > > > On Mar 31, 2021, at 10:48 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: > > > > Hello. > > > > On Wed, Mar 31, 2021 at 05:39:25PM +0000, Nick Terrell wrote: > >> > >> > >>> On Mar 30, 2021, at 4:50 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: > >>> > >>> On Tue, Mar 30, 2021 at 01:32:35PM +0200, Piotr Gorski wrote: > >>>> kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. > >>>> > >>>> Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> > >>>> --- > >>>> Makefile | 7 +++++-- > >>>> init/Kconfig | 9 ++++++--- > >>>> 2 files changed, 11 insertions(+), 5 deletions(-) > >>>> > >>>> diff --git a/Makefile b/Makefile > >>>> index 5160ff8903c1..82f4f4cc2955 100644 > >>>> --- a/Makefile > >>>> +++ b/Makefile > >>>> @@ -1156,8 +1156,8 @@ endif # INSTALL_MOD_STRIP > >>>> export mod_strip_cmd > >>>> > >>>> # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed > >>>> -# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP > >>>> -# or CONFIG_MODULE_COMPRESS_XZ. > >>>> +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP, > >>>> +# CONFIG_MODULE_COMPRESS_XZ, or CONFIG_MODULE_COMPRESS_ZSTD. > >>>> > >>>> mod_compress_cmd = true > >>>> ifdef CONFIG_MODULE_COMPRESS > >>>> @@ -1167,6 +1167,9 @@ ifdef CONFIG_MODULE_COMPRESS > >>>> ifdef CONFIG_MODULE_COMPRESS_XZ > >>>> mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f > >>>> endif # CONFIG_MODULE_COMPRESS_XZ > >>>> + ifdef CONFIG_MODULE_COMPRESS_ZSTD > >>>> + mod_compress_cmd = $(ZSTD) -T0 --rm -f -q > >> > >> This will use the default zstd level, level 3. I think it would make more sense to use a high > >> compression level. Level 19 would probably be a good choice. That will choose a window > >> size of up to 8MB, meaning the decompressor needs to allocate that much memory. If that > >> is unacceptable, you could use `zstd -T0 --rm -f -q -19 --zstd=wlog=21`, which will use a > >> window size of up to 2MB, to match the XZ command. Note that if the file is smaller than > >> the window size, it will be shrunk to the smallest power of two at least as large as the file. > > > > Please no. We've already done that with initramfs in Arch, and it > > increased the time to generate it enormously. > > > > I understand that building a kernel is a more rare operation than > > regenerating initramfs, but still I'd go against hard-coding the level. > > And if it should be specified anyway, I'd opt in for an explicit > > configuration option. Remember, not all the kernel are built on > > build farms... > > > > FWIW, Piotr originally used level 9 which worked okay, but I insisted > > on sending the patch initially without specifying level at all like it is > > done for other compressors. If this is a wrong approach, then oh meh, > > mea culpa ;). > > > > Whatever default non-standard compression level you choose, I'm fine > > as long as I can change it without editing Makefile. > > That makes sense to me. I have a deep seated need to compress files as > efficiently as possible for widely distributed packages. But, I understand that > slow compression significantly impacts build times for quick iteration. I’d be > happy with a compression level parameter that defaults to a happy middle. > > I’m also fine with taking this patch as-is if it is easier, and I can put up another > patch that adds a compression level parameter, since I don’t want to block > merging this. Well, it seems Andrew already took this into his tree, so feel free to drop another one on top of that! > > Best, > Nick Terrell > > > Thanks! > > > >> > >> Best, > >> Nick Terrell > >> > >>>> + endif # CONFIG_MODULE_COMPRESS_ZSTD > >>>> endif # CONFIG_MODULE_COMPRESS > >>>> export mod_compress_cmd > >>>> > >>>> diff --git a/init/Kconfig b/init/Kconfig > >>>> index 8c2cfd88f6ef..86a452bc2747 100644 > >>>> --- a/init/Kconfig > >>>> +++ b/init/Kconfig > >>>> @@ -2250,8 +2250,8 @@ config MODULE_COMPRESS > >>>> bool "Compress modules on installation" > >>>> help > >>>> > >>>> - Compresses kernel modules when 'make modules_install' is run; gzip or > >>>> - xz depending on "Compression algorithm" below. > >>>> + Compresses kernel modules when 'make modules_install' is run; gzip, > >>>> + xz, or zstd depending on "Compression algorithm" below. > >>>> > >>>> module-init-tools MAY support gzip, and kmod MAY support gzip and xz. > >>>> > >>>> @@ -2273,7 +2273,7 @@ choice > >>>> This determines which sort of compression will be used during > >>>> 'make modules_install'. > >>>> > >>>> - GZIP (default) and XZ are supported. > >>>> + GZIP (default), XZ, and ZSTD are supported. > >>>> > >>>> config MODULE_COMPRESS_GZIP > >>>> bool "GZIP" > >>>> @@ -2281,6 +2281,9 @@ config MODULE_COMPRESS_GZIP > >>>> config MODULE_COMPRESS_XZ > >>>> bool "XZ" > >>>> > >>>> +config MODULE_COMPRESS_ZSTD > >>>> + bool "ZSTD" > >>>> + > >>>> endchoice > >>>> > >>>> config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS > >>>> -- > >>>> 2.31.0.97.g1424303384 > >>>> > >>> > >>> Great! > >>> > >>> Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> > >>> > >>> This works perfectly fine in Arch Linux if accompanied by the > >>> following mkinitcpio amendment: [1]. > >>> > >>> I'm also Cc'ing other people from get_maintainers output just > >>> to make this submission more visible. > >>> > >>> Thanks. > >>> > >>> [1] https://github.com/archlinux/mkinitcpio/pull/43 > >>> > >>> -- > >>> Oleksandr Natalenko (post-factum) > >> > > > > -- > > Oleksandr Natalenko (post-factum) >
On Thu, Apr 1, 2021 at 4:21 AM Nick Terrell <terrelln@fb.com> wrote: > > > > > On Mar 31, 2021, at 10:48 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: > > > > Hello. > > > > On Wed, Mar 31, 2021 at 05:39:25PM +0000, Nick Terrell wrote: > >> > >> > >>> On Mar 30, 2021, at 4:50 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: > >>> > >>> On Tue, Mar 30, 2021 at 01:32:35PM +0200, Piotr Gorski wrote: > >>>> kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. > >>>> > >>>> Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> > >>>> --- > >>>> Makefile | 7 +++++-- > >>>> init/Kconfig | 9 ++++++--- > >>>> 2 files changed, 11 insertions(+), 5 deletions(-) > >>>> > >>>> diff --git a/Makefile b/Makefile > >>>> index 5160ff8903c1..82f4f4cc2955 100644 > >>>> --- a/Makefile > >>>> +++ b/Makefile > >>>> @@ -1156,8 +1156,8 @@ endif # INSTALL_MOD_STRIP > >>>> export mod_strip_cmd > >>>> > >>>> # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed > >>>> -# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP > >>>> -# or CONFIG_MODULE_COMPRESS_XZ. > >>>> +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP, > >>>> +# CONFIG_MODULE_COMPRESS_XZ, or CONFIG_MODULE_COMPRESS_ZSTD. > >>>> > >>>> mod_compress_cmd = true > >>>> ifdef CONFIG_MODULE_COMPRESS > >>>> @@ -1167,6 +1167,9 @@ ifdef CONFIG_MODULE_COMPRESS > >>>> ifdef CONFIG_MODULE_COMPRESS_XZ > >>>> mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f > >>>> endif # CONFIG_MODULE_COMPRESS_XZ > >>>> + ifdef CONFIG_MODULE_COMPRESS_ZSTD > >>>> + mod_compress_cmd = $(ZSTD) -T0 --rm -f -q > >> > >> This will use the default zstd level, level 3. I think it would make more sense to use a high > >> compression level. Level 19 would probably be a good choice. That will choose a window > >> size of up to 8MB, meaning the decompressor needs to allocate that much memory. If that > >> is unacceptable, you could use `zstd -T0 --rm -f -q -19 --zstd=wlog=21`, which will use a > >> window size of up to 2MB, to match the XZ command. Note that if the file is smaller than > >> the window size, it will be shrunk to the smallest power of two at least as large as the file. > > > > Please no. We've already done that with initramfs in Arch, and it > > increased the time to generate it enormously. > > > > I understand that building a kernel is a more rare operation than > > regenerating initramfs, but still I'd go against hard-coding the level. > > And if it should be specified anyway, I'd opt in for an explicit > > configuration option. Remember, not all the kernel are built on > > build farms... > > > > FWIW, Piotr originally used level 9 which worked okay, but I insisted > > on sending the patch initially without specifying level at all like it is > > done for other compressors. If this is a wrong approach, then oh meh, > > mea culpa ;). > > > > Whatever default non-standard compression level you choose, I'm fine > > as long as I can change it without editing Makefile. > > That makes sense to me. I have a deep seated need to compress files as > efficiently as possible for widely distributed packages. But, I understand that > slow compression significantly impacts build times for quick iteration. I’d be > happy with a compression level parameter that defaults to a happy middle. > > I’m also fine with taking this patch as-is if it is easier, and I can put up another > patch that adds a compression level parameter, since I don’t want to block > merging this. I do not want to take such a patch. Meeking everyone's requirement results in a bad project for everyone. Does this work for you? make modules_install ZSTD="zstd -19" > Best, > Nick Terrell > > > Thanks! > > > >> > >> Best, > >> Nick Terrell > >> > >>>> + endif # CONFIG_MODULE_COMPRESS_ZSTD > >>>> endif # CONFIG_MODULE_COMPRESS > >>>> export mod_compress_cmd > >>>> > >>>> diff --git a/init/Kconfig b/init/Kconfig > >>>> index 8c2cfd88f6ef..86a452bc2747 100644 > >>>> --- a/init/Kconfig > >>>> +++ b/init/Kconfig > >>>> @@ -2250,8 +2250,8 @@ config MODULE_COMPRESS > >>>> bool "Compress modules on installation" > >>>> help > >>>> > >>>> - Compresses kernel modules when 'make modules_install' is run; gzip or > >>>> - xz depending on "Compression algorithm" below. > >>>> + Compresses kernel modules when 'make modules_install' is run; gzip, > >>>> + xz, or zstd depending on "Compression algorithm" below. > >>>> > >>>> module-init-tools MAY support gzip, and kmod MAY support gzip and xz. > >>>> > >>>> @@ -2273,7 +2273,7 @@ choice > >>>> This determines which sort of compression will be used during > >>>> 'make modules_install'. > >>>> > >>>> - GZIP (default) and XZ are supported. > >>>> + GZIP (default), XZ, and ZSTD are supported. > >>>> > >>>> config MODULE_COMPRESS_GZIP > >>>> bool "GZIP" > >>>> @@ -2281,6 +2281,9 @@ config MODULE_COMPRESS_GZIP > >>>> config MODULE_COMPRESS_XZ > >>>> bool "XZ" > >>>> > >>>> +config MODULE_COMPRESS_ZSTD > >>>> + bool "ZSTD" > >>>> + > >>>> endchoice > >>>> > >>>> config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS > >>>> -- > >>>> 2.31.0.97.g1424303384 > >>>> > >>> > >>> Great! > >>> > >>> Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> > >>> > >>> This works perfectly fine in Arch Linux if accompanied by the > >>> following mkinitcpio amendment: [1]. > >>> > >>> I'm also Cc'ing other people from get_maintainers output just > >>> to make this submission more visible. > >>> > >>> Thanks. > >>> > >>> [1] https://github.com/archlinux/mkinitcpio/pull/43 > >>> > >>> -- > >>> Oleksandr Natalenko (post-factum) > >> > > > > -- > > Oleksandr Natalenko (post-factum) >
On Tue, Mar 30, 2021 at 8:33 PM Piotr Gorski <lucjan.lucjanov@gmail.com> wrote: > > kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. > > Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> > --- > Makefile | 7 +++++-- > init/Kconfig | 9 ++++++--- > 2 files changed, 11 insertions(+), 5 deletions(-) Piort, sorry for bothering you, but could you rebase on top of this clean-up patch set? https://patchwork.kernel.org/project/linux-kbuild/list/?series=458809 or git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git kbuild The module compression code should not be placed in the top Makefile. > diff --git a/Makefile b/Makefile > index 5160ff8903c1..82f4f4cc2955 100644 > --- a/Makefile > +++ b/Makefile > @@ -1156,8 +1156,8 @@ endif # INSTALL_MOD_STRIP > export mod_strip_cmd > > # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed > -# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP > -# or CONFIG_MODULE_COMPRESS_XZ. > +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP, > +# CONFIG_MODULE_COMPRESS_XZ, or CONFIG_MODULE_COMPRESS_ZSTD. > > mod_compress_cmd = true > ifdef CONFIG_MODULE_COMPRESS > @@ -1167,6 +1167,9 @@ ifdef CONFIG_MODULE_COMPRESS > ifdef CONFIG_MODULE_COMPRESS_XZ > mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f > endif # CONFIG_MODULE_COMPRESS_XZ > + ifdef CONFIG_MODULE_COMPRESS_ZSTD > + mod_compress_cmd = $(ZSTD) -T0 --rm -f -q > + endif # CONFIG_MODULE_COMPRESS_ZSTD > endif # CONFIG_MODULE_COMPRESS > export mod_compress_cmd > > diff --git a/init/Kconfig b/init/Kconfig > index 8c2cfd88f6ef..86a452bc2747 100644 > --- a/init/Kconfig > +++ b/init/Kconfig > @@ -2250,8 +2250,8 @@ config MODULE_COMPRESS > bool "Compress modules on installation" > help > > - Compresses kernel modules when 'make modules_install' is run; gzip or > - xz depending on "Compression algorithm" below. > + Compresses kernel modules when 'make modules_install' is run; gzip, > + xz, or zstd depending on "Compression algorithm" below. > > module-init-tools MAY support gzip, and kmod MAY support gzip and xz. > > @@ -2273,7 +2273,7 @@ choice > This determines which sort of compression will be used during > 'make modules_install'. > > - GZIP (default) and XZ are supported. > + GZIP (default), XZ, and ZSTD are supported. > > config MODULE_COMPRESS_GZIP > bool "GZIP" > @@ -2281,6 +2281,9 @@ config MODULE_COMPRESS_GZIP > config MODULE_COMPRESS_XZ > bool "XZ" > > +config MODULE_COMPRESS_ZSTD > + bool "ZSTD" > + > endchoice > > config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS > -- > 2.31.0.97.g1424303384 > -- Best Regards Masahiro Yamada
> On Apr 7, 2021, at 6:53 AM, Masahiro Yamada <masahiroy@kernel.org> wrote: > > On Thu, Apr 1, 2021 at 4:21 AM Nick Terrell <terrelln@fb.com> wrote: >> >> >> >>> On Mar 31, 2021, at 10:48 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: >>> >>> Hello. >>> >>> On Wed, Mar 31, 2021 at 05:39:25PM +0000, Nick Terrell wrote: >>>> >>>> >>>>> On Mar 30, 2021, at 4:50 AM, Oleksandr Natalenko <oleksandr@natalenko.name> wrote: >>>>> >>>>> On Tue, Mar 30, 2021 at 01:32:35PM +0200, Piotr Gorski wrote: >>>>>> kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. >>>>>> >>>>>> Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> >>>>>> --- >>>>>> Makefile | 7 +++++-- >>>>>> init/Kconfig | 9 ++++++--- >>>>>> 2 files changed, 11 insertions(+), 5 deletions(-) >>>>>> >>>>>> diff --git a/Makefile b/Makefile >>>>>> index 5160ff8903c1..82f4f4cc2955 100644 >>>>>> --- a/Makefile >>>>>> +++ b/Makefile >>>>>> @@ -1156,8 +1156,8 @@ endif # INSTALL_MOD_STRIP >>>>>> export mod_strip_cmd >>>>>> >>>>>> # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed >>>>>> -# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP >>>>>> -# or CONFIG_MODULE_COMPRESS_XZ. >>>>>> +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP, >>>>>> +# CONFIG_MODULE_COMPRESS_XZ, or CONFIG_MODULE_COMPRESS_ZSTD. >>>>>> >>>>>> mod_compress_cmd = true >>>>>> ifdef CONFIG_MODULE_COMPRESS >>>>>> @@ -1167,6 +1167,9 @@ ifdef CONFIG_MODULE_COMPRESS >>>>>> ifdef CONFIG_MODULE_COMPRESS_XZ >>>>>> mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f >>>>>> endif # CONFIG_MODULE_COMPRESS_XZ >>>>>> + ifdef CONFIG_MODULE_COMPRESS_ZSTD >>>>>> + mod_compress_cmd = $(ZSTD) -T0 --rm -f -q >>>> >>>> This will use the default zstd level, level 3. I think it would make more sense to use a high >>>> compression level. Level 19 would probably be a good choice. That will choose a window >>>> size of up to 8MB, meaning the decompressor needs to allocate that much memory. If that >>>> is unacceptable, you could use `zstd -T0 --rm -f -q -19 --zstd=wlog=21`, which will use a >>>> window size of up to 2MB, to match the XZ command. Note that if the file is smaller than >>>> the window size, it will be shrunk to the smallest power of two at least as large as the file. >>> >>> Please no. We've already done that with initramfs in Arch, and it >>> increased the time to generate it enormously. >>> >>> I understand that building a kernel is a more rare operation than >>> regenerating initramfs, but still I'd go against hard-coding the level. >>> And if it should be specified anyway, I'd opt in for an explicit >>> configuration option. Remember, not all the kernel are built on >>> build farms... >>> >>> FWIW, Piotr originally used level 9 which worked okay, but I insisted >>> on sending the patch initially without specifying level at all like it is >>> done for other compressors. If this is a wrong approach, then oh meh, >>> mea culpa ;). >>> >>> Whatever default non-standard compression level you choose, I'm fine >>> as long as I can change it without editing Makefile. >> >> That makes sense to me. I have a deep seated need to compress files as >> efficiently as possible for widely distributed packages. But, I understand that >> slow compression significantly impacts build times for quick iteration. I’d be >> happy with a compression level parameter that defaults to a happy middle. >> >> I’m also fine with taking this patch as-is if it is easier, and I can put up another >> patch that adds a compression level parameter, since I don’t want to block >> merging this. > > > I do not want to take such a patch. > Meeking everyone's requirement > results in a bad project for everyone. > > > Does this work for you? > > make modules_install ZSTD="zstd -19" Yeah, that’s perfect. Do you think it is worth mentioning in the docs for `MODULE_COMPRESS_ZSTD`? Best, Nick >> Best, >> Nick Terrell >> >>> Thanks! >>> >>>> >>>> Best, >>>> Nick Terrell >>>> >>>>>> + endif # CONFIG_MODULE_COMPRESS_ZSTD >>>>>> endif # CONFIG_MODULE_COMPRESS >>>>>> export mod_compress_cmd >>>>>> >>>>>> diff --git a/init/Kconfig b/init/Kconfig >>>>>> index 8c2cfd88f6ef..86a452bc2747 100644 >>>>>> --- a/init/Kconfig >>>>>> +++ b/init/Kconfig >>>>>> @@ -2250,8 +2250,8 @@ config MODULE_COMPRESS >>>>>> bool "Compress modules on installation" >>>>>> help >>>>>> >>>>>> - Compresses kernel modules when 'make modules_install' is run; gzip or >>>>>> - xz depending on "Compression algorithm" below. >>>>>> + Compresses kernel modules when 'make modules_install' is run; gzip, >>>>>> + xz, or zstd depending on "Compression algorithm" below. >>>>>> >>>>>> module-init-tools MAY support gzip, and kmod MAY support gzip and xz. >>>>>> >>>>>> @@ -2273,7 +2273,7 @@ choice >>>>>> This determines which sort of compression will be used during >>>>>> 'make modules_install'. >>>>>> >>>>>> - GZIP (default) and XZ are supported. >>>>>> + GZIP (default), XZ, and ZSTD are supported. >>>>>> >>>>>> config MODULE_COMPRESS_GZIP >>>>>> bool "GZIP" >>>>>> @@ -2281,6 +2281,9 @@ config MODULE_COMPRESS_GZIP >>>>>> config MODULE_COMPRESS_XZ >>>>>> bool "XZ" >>>>>> >>>>>> +config MODULE_COMPRESS_ZSTD >>>>>> + bool "ZSTD" >>>>>> + >>>>>> endchoice >>>>>> >>>>>> config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS >>>>>> -- >>>>>> 2.31.0.97.g1424303384 >>>>>> >>>>> >>>>> Great! >>>>> >>>>> Reviewed-by: Oleksandr Natalenko <oleksandr@natalenko.name> >>>>> >>>>> This works perfectly fine in Arch Linux if accompanied by the >>>>> following mkinitcpio amendment: [1]. >>>>> >>>>> I'm also Cc'ing other people from get_maintainers output just >>>>> to make this submission more visible. >>>>> >>>>> Thanks. >>>>> >>>>> [1] https://github.com/archlinux/mkinitcpio/pull/43 >>>>> >>>>> -- >>>>> Oleksandr Natalenko (post-factum) >>>> >>> >>> -- >>> Oleksandr Natalenko (post-factum) >> > > > -- > Best Regards > Masahiro Yamada
diff --git a/Makefile b/Makefile index 5160ff8903c1..82f4f4cc2955 100644 --- a/Makefile +++ b/Makefile @@ -1156,8 +1156,8 @@ endif # INSTALL_MOD_STRIP export mod_strip_cmd # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed -# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP -# or CONFIG_MODULE_COMPRESS_XZ. +# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP, +# CONFIG_MODULE_COMPRESS_XZ, or CONFIG_MODULE_COMPRESS_ZSTD. mod_compress_cmd = true ifdef CONFIG_MODULE_COMPRESS @@ -1167,6 +1167,9 @@ ifdef CONFIG_MODULE_COMPRESS ifdef CONFIG_MODULE_COMPRESS_XZ mod_compress_cmd = $(XZ) --lzma2=dict=2MiB -f endif # CONFIG_MODULE_COMPRESS_XZ + ifdef CONFIG_MODULE_COMPRESS_ZSTD + mod_compress_cmd = $(ZSTD) -T0 --rm -f -q + endif # CONFIG_MODULE_COMPRESS_ZSTD endif # CONFIG_MODULE_COMPRESS export mod_compress_cmd diff --git a/init/Kconfig b/init/Kconfig index 8c2cfd88f6ef..86a452bc2747 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2250,8 +2250,8 @@ config MODULE_COMPRESS bool "Compress modules on installation" help - Compresses kernel modules when 'make modules_install' is run; gzip or - xz depending on "Compression algorithm" below. + Compresses kernel modules when 'make modules_install' is run; gzip, + xz, or zstd depending on "Compression algorithm" below. module-init-tools MAY support gzip, and kmod MAY support gzip and xz. @@ -2273,7 +2273,7 @@ choice This determines which sort of compression will be used during 'make modules_install'. - GZIP (default) and XZ are supported. + GZIP (default), XZ, and ZSTD are supported. config MODULE_COMPRESS_GZIP bool "GZIP" @@ -2281,6 +2281,9 @@ config MODULE_COMPRESS_GZIP config MODULE_COMPRESS_XZ bool "XZ" +config MODULE_COMPRESS_ZSTD + bool "ZSTD" + endchoice config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
kmod 28 supports modules compressed in zstd format so let's add this possibility to kernel. Signed-off-by: Piotr Gorski <lucjan.lucjanov@gmail.com> --- Makefile | 7 +++++-- init/Kconfig | 9 ++++++--- 2 files changed, 11 insertions(+), 5 deletions(-)