| Message ID | 878228ad88df38f8914c7aa25dede3ed05c50f48.1616765869.git.christophe.leroy@csgroup.eu (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Implement GENERIC_CMDLINE | expand |
On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy <christophe.leroy@csgroup.eu> wrote: > > This code provides architectures with a way to build command line > based on what is built in the kernel and what is handed over by the > bootloader, based on selected compile-time options. Note that I have this patch pending: https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210316193820.3137-1-alex@ghiti.fr/ It's going to need to be adapted for this. I've held off applying to see if this gets settled. > > Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> > --- > v3: > - Addressed comments from Will > - Added capability to have src == dst > --- > include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 include/linux/cmdline.h > > diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h > new file mode 100644 > index 000000000000..dea87edd41be > --- /dev/null > +++ b/include/linux/cmdline.h > @@ -0,0 +1,57 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#ifndef _LINUX_CMDLINE_H > +#define _LINUX_CMDLINE_H > + > +#include <linux/string.h> > + > +/* Allow architectures to override strlcat, powerpc can't use strings so early */ > +#ifndef cmdline_strlcat > +#define cmdline_strlcat strlcat > +#endif > + > +/* > + * This function will append or prepend a builtin command line to the command > + * line provided by the bootloader. Kconfig options can be used to alter > + * the behavior of this builtin command line. > + * @dst: The destination of the final appended/prepended string. > + * @src: The starting string or NULL if there isn't one. > + * @len: the length of dest buffer. > + */ > +static __always_inline void __cmdline_build(char *dst, const char *src, size_t len) > +{ > + if (!len || src == dst) > + return; > + > + if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !src) { > + dst[0] = 0; > + cmdline_strlcat(dst, CONFIG_CMDLINE, len); > + return; > + } > + > + if (dst != src) > + dst[0] = 0; > + > + if (IS_ENABLED(CONFIG_CMDLINE_PREPEND)) > + cmdline_strlcat(dst, CONFIG_CMDLINE " ", len); > + > + cmdline_strlcat(dst, src, len); > + > + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND)) Should be APPEND. > + cmdline_strlcat(dst, " " CONFIG_CMDLINE, len); > +} > + > +#define cmdline_build(dst, src, len) do { \ Perhaps a comment why we need this to be a define. > + char *__c_dst = (dst); \ > + const char *__c_src = (src); \ > + \ > + if (__c_src == __c_dst) { \ > + static char __c_tmp[COMMAND_LINE_SIZE] __initdata = ""; \ > + \ > + cmdline_strlcat(__c_tmp, __c_src, COMMAND_LINE_SIZE); \ > + __cmdline_build(__c_dst, __c_tmp, (len)); \ > + } else { \ > + __cmdline_build(__c_dst, __c_src, (len)); \ > + } \ > +} while (0) > + > +#endif /* _LINUX_CMDLINE_H */ > -- > 2.25.0 >
Le 26/03/2021 à 16:42, Rob Herring a écrit : > On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy > <christophe.leroy@csgroup.eu> wrote: >> >> This code provides architectures with a way to build command line >> based on what is built in the kernel and what is handed over by the >> bootloader, based on selected compile-time options. > > Note that I have this patch pending: > > https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210316193820.3137-1-alex@ghiti.fr/ > > It's going to need to be adapted for this. I've held off applying to > see if this gets settled. good point. Hope we can't have things like option="beautiful weather" > >> >> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> >> --- >> v3: >> - Addressed comments from Will >> - Added capability to have src == dst >> --- >> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 57 insertions(+) >> create mode 100644 include/linux/cmdline.h >> >> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h >> new file mode 100644 >> index 000000000000..dea87edd41be >> --- /dev/null >> +++ b/include/linux/cmdline.h >> @@ -0,0 +1,57 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +#ifndef _LINUX_CMDLINE_H >> +#define _LINUX_CMDLINE_H >> + >> +#include <linux/string.h> >> + >> +/* Allow architectures to override strlcat, powerpc can't use strings so early */ >> +#ifndef cmdline_strlcat >> +#define cmdline_strlcat strlcat >> +#endif >> + >> +/* >> + * This function will append or prepend a builtin command line to the command >> + * line provided by the bootloader. Kconfig options can be used to alter >> + * the behavior of this builtin command line. >> + * @dst: The destination of the final appended/prepended string. >> + * @src: The starting string or NULL if there isn't one. >> + * @len: the length of dest buffer. >> + */ >> +static __always_inline void __cmdline_build(char *dst, const char *src, size_t len) >> +{ >> + if (!len || src == dst) >> + return; >> + >> + if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !src) { >> + dst[0] = 0; >> + cmdline_strlcat(dst, CONFIG_CMDLINE, len); >> + return; >> + } >> + >> + if (dst != src) >> + dst[0] = 0; >> + >> + if (IS_ENABLED(CONFIG_CMDLINE_PREPEND)) >> + cmdline_strlcat(dst, CONFIG_CMDLINE " ", len); >> + >> + cmdline_strlcat(dst, src, len); >> + >> + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND)) > > Should be APPEND. Not yet. For the time being all architectures use EXTEND only. In patch 3 it is changed to: - if (IS_ENABLED(CONFIG_CMDLINE_EXTEND)) + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || IS_ENABLED(CONFIG_CMDLINE_APPEND)) Then in last patch, I forgot but I should have done: - if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || IS_ENABLED(CONFIG_CMDLINE_APPEND)) + if (IS_ENABLED(CONFIG_CMDLINE_APPEND)) > >> + cmdline_strlcat(dst, " " CONFIG_CMDLINE, len); >> +} >> + >> +#define cmdline_build(dst, src, len) do { \ > > Perhaps a comment why we need this to be a define. Probably we don't need anymore as I finally decided to use COMMAND_LINE_SIZE instead of 'len' as the size of the temporary buffer. > >> + char *__c_dst = (dst); \ >> + const char *__c_src = (src); \ >> + \ >> + if (__c_src == __c_dst) { \ >> + static char __c_tmp[COMMAND_LINE_SIZE] __initdata = ""; \ >> + \ >> + cmdline_strlcat(__c_tmp, __c_src, COMMAND_LINE_SIZE); \ >> + __cmdline_build(__c_dst, __c_tmp, (len)); \ >> + } else { \ >> + __cmdline_build(__c_dst, __c_src, (len)); \ >> + } \ >> +} while (0) >> + >> +#endif /* _LINUX_CMDLINE_H */ >> -- >> 2.25.0 >> Christophe
On Fri, Mar 26, 2021 at 01:44:48PM +0000, Christophe Leroy wrote: > This code provides architectures with a way to build command line > based on what is built in the kernel and what is handed over by the > bootloader, based on selected compile-time options. > > Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> > --- > v3: > - Addressed comments from Will > - Added capability to have src == dst > --- > include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 include/linux/cmdline.h > > diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h > new file mode 100644 > index 000000000000..dea87edd41be > --- /dev/null > +++ b/include/linux/cmdline.h > @@ -0,0 +1,57 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#ifndef _LINUX_CMDLINE_H > +#define _LINUX_CMDLINE_H > + > +#include <linux/string.h> > + > +/* Allow architectures to override strlcat, powerpc can't use strings so early */ > +#ifndef cmdline_strlcat > +#define cmdline_strlcat strlcat > +#endif > + > +/* > + * This function will append or prepend a builtin command line to the command > + * line provided by the bootloader. Kconfig options can be used to alter > + * the behavior of this builtin command line. > + * @dst: The destination of the final appended/prepended string. > + * @src: The starting string or NULL if there isn't one. > + * @len: the length of dest buffer. > + */ Append or prepend ? Cisco requires both at the same time. This is why my implementation provides both. I can't use this with both at once. Daniel
> Am 30.03.2021 um 19:27 schrieb Daniel Walker <danielwa@cisco.com>: > > On Fri, Mar 26, 2021 at 01:44:48PM +0000, Christophe Leroy wrote: >> This code provides architectures with a way to build command line >> based on what is built in the kernel and what is handed over by the >> bootloader, based on selected compile-time options. >> >> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> >> --- >> v3: >> - Addressed comments from Will >> - Added capability to have src == dst >> --- >> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 57 insertions(+) >> create mode 100644 include/linux/cmdline.h >> >> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h >> new file mode 100644 >> index 000000000000..dea87edd41be >> --- /dev/null >> +++ b/include/linux/cmdline.h >> @@ -0,0 +1,57 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +#ifndef _LINUX_CMDLINE_H >> +#define _LINUX_CMDLINE_H >> + >> +#include <linux/string.h> >> + >> +/* Allow architectures to override strlcat, powerpc can't use strings so early */ >> +#ifndef cmdline_strlcat >> +#define cmdline_strlcat strlcat >> +#endif >> + >> +/* >> + * This function will append or prepend a builtin command line to the command >> + * line provided by the bootloader. Kconfig options can be used to alter >> + * the behavior of this builtin command line. >> + * @dst: The destination of the final appended/prepended string. >> + * @src: The starting string or NULL if there isn't one. >> + * @len: the length of dest buffer. >> + */ > > Append or prepend ? Cisco requires both at the same time. This is why my > implementation provides both. I can't use this with both at once. Just an idea: what about defining CMDLINE as a pattern where e.g. "$$" or "%%" is replaced by the boot loader command line? Then you can formulate replace, prepend, append, prepend+append with a single CONFIG setting. It may be a little more complex in code (scanning for the pattern and replacing it and take care to temporary memory) but IMHO it could be worth to consider. BR, Nikolaus Schaller
On Tue, Mar 30, 2021 at 08:07:30PM +0200, H. Nikolaus Schaller wrote: > > > Am 30.03.2021 um 19:27 schrieb Daniel Walker <danielwa@cisco.com>: > > > > On Fri, Mar 26, 2021 at 01:44:48PM +0000, Christophe Leroy wrote: > >> This code provides architectures with a way to build command line > >> based on what is built in the kernel and what is handed over by the > >> bootloader, based on selected compile-time options. > >> > >> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> > >> --- > >> v3: > >> - Addressed comments from Will > >> - Added capability to have src == dst > >> --- > >> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++ > >> 1 file changed, 57 insertions(+) > >> create mode 100644 include/linux/cmdline.h > >> > >> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h > >> new file mode 100644 > >> index 000000000000..dea87edd41be > >> --- /dev/null > >> +++ b/include/linux/cmdline.h > >> @@ -0,0 +1,57 @@ > >> +/* SPDX-License-Identifier: GPL-2.0 */ > >> +#ifndef _LINUX_CMDLINE_H > >> +#define _LINUX_CMDLINE_H > >> + > >> +#include <linux/string.h> > >> + > >> +/* Allow architectures to override strlcat, powerpc can't use strings so early */ > >> +#ifndef cmdline_strlcat > >> +#define cmdline_strlcat strlcat > >> +#endif > >> + > >> +/* > >> + * This function will append or prepend a builtin command line to the command > >> + * line provided by the bootloader. Kconfig options can be used to alter > >> + * the behavior of this builtin command line. > >> + * @dst: The destination of the final appended/prepended string. > >> + * @src: The starting string or NULL if there isn't one. > >> + * @len: the length of dest buffer. > >> + */ > > > > Append or prepend ? Cisco requires both at the same time. This is why my > > implementation provides both. I can't use this with both at once. > > Just an idea: what about defining CMDLINE as a pattern where e.g. "$$" or "%%" > is replaced by the boot loader command line? > > Then you can formulate replace, prepend, append, prepend+append with a single > CONFIG setting. > > It may be a little more complex in code (scanning for the pattern and replacing > it and take care to temporary memory) but IMHO it could be worth to consider. In some cases this code could be used extremely early in boot up. For example in the prom_init.c powerpc code, or in efi changes. The flexibility to find and replace like that is not always an option due to the nature of the environment. It's not impossible of course. Daniel
Le 26/03/2021 à 16:42, Rob Herring a écrit : > On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy > <christophe.leroy@csgroup.eu> wrote: >> >> This code provides architectures with a way to build command line >> based on what is built in the kernel and what is handed over by the >> bootloader, based on selected compile-time options. > > Note that I have this patch pending: > > https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210316193820.3137-1-alex@ghiti.fr/ > > It's going to need to be adapted for this. I've held off applying to > see if this gets settled. When reworking EFI, I found out that they are a similar handling, which in addition takes care of space inside quotes. I added something similar now in cmdline_build() function. > >> >> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> >> --- >> v3: >> - Addressed comments from Will >> - Added capability to have src == dst >> --- >> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 57 insertions(+) >> create mode 100644 include/linux/cmdline.h >> >> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h >> new file mode 100644 >> index 000000000000..dea87edd41be >> --- /dev/null >> +++ b/include/linux/cmdline.h >> @@ -0,0 +1,57 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +#ifndef _LINUX_CMDLINE_H >> +#define _LINUX_CMDLINE_H >> + >> +#include <linux/string.h> >> + >> +/* Allow architectures to override strlcat, powerpc can't use strings so early */ >> +#ifndef cmdline_strlcat >> +#define cmdline_strlcat strlcat >> +#endif >> + >> +/* >> + * This function will append or prepend a builtin command line to the command >> + * line provided by the bootloader. Kconfig options can be used to alter >> + * the behavior of this builtin command line. >> + * @dst: The destination of the final appended/prepended string. >> + * @src: The starting string or NULL if there isn't one. >> + * @len: the length of dest buffer. >> + */ >> +static __always_inline void __cmdline_build(char *dst, const char *src, size_t len) >> +{ >> + if (!len || src == dst) >> + return; >> + >> + if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !src) { >> + dst[0] = 0; >> + cmdline_strlcat(dst, CONFIG_CMDLINE, len); >> + return; >> + } >> + >> + if (dst != src) >> + dst[0] = 0; >> + >> + if (IS_ENABLED(CONFIG_CMDLINE_PREPEND)) >> + cmdline_strlcat(dst, CONFIG_CMDLINE " ", len); >> + >> + cmdline_strlcat(dst, src, len); >> + >> + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND)) > > Should be APPEND. > >> + cmdline_strlcat(dst, " " CONFIG_CMDLINE, len); >> +} >> + >> +#define cmdline_build(dst, src, len) do { \ > > Perhaps a comment why we need this to be a define. > >> + char *__c_dst = (dst); \ >> + const char *__c_src = (src); \ >> + \ >> + if (__c_src == __c_dst) { \ >> + static char __c_tmp[COMMAND_LINE_SIZE] __initdata = ""; \ >> + \ >> + cmdline_strlcat(__c_tmp, __c_src, COMMAND_LINE_SIZE); \ >> + __cmdline_build(__c_dst, __c_tmp, (len)); \ >> + } else { \ >> + __cmdline_build(__c_dst, __c_src, (len)); \ >> + } \ >> +} while (0) >> + >> +#endif /* _LINUX_CMDLINE_H */ >> -- >> 2.25.0 >>
Le 30/03/2021 à 19:27, Daniel Walker a écrit : > On Fri, Mar 26, 2021 at 01:44:48PM +0000, Christophe Leroy wrote: >> This code provides architectures with a way to build command line >> based on what is built in the kernel and what is handed over by the >> bootloader, based on selected compile-time options. >> >> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> >> --- >> v3: >> - Addressed comments from Will >> - Added capability to have src == dst >> --- >> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 57 insertions(+) >> create mode 100644 include/linux/cmdline.h >> >> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h >> new file mode 100644 >> index 000000000000..dea87edd41be >> --- /dev/null >> +++ b/include/linux/cmdline.h >> @@ -0,0 +1,57 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +#ifndef _LINUX_CMDLINE_H >> +#define _LINUX_CMDLINE_H >> + >> +#include <linux/string.h> >> + >> +/* Allow architectures to override strlcat, powerpc can't use strings so early */ >> +#ifndef cmdline_strlcat >> +#define cmdline_strlcat strlcat >> +#endif >> + >> +/* >> + * This function will append or prepend a builtin command line to the command >> + * line provided by the bootloader. Kconfig options can be used to alter >> + * the behavior of this builtin command line. >> + * @dst: The destination of the final appended/prepended string. >> + * @src: The starting string or NULL if there isn't one. >> + * @len: the length of dest buffer. >> + */ > > Append or prepend ? Cisco requires both at the same time. This is why my > implementation provides both. I can't use this with both at once. > I think it can be added as a second step if dimmed necessary. The feeling I have from all the discussion is that it's not what people from the community are looking for at the moment. Anyway, once all architectures are moved to generic handling, I believe it is then easier to split CONFIG_CMDLINE in two configuration items in order to provide both appending and prepending at the same time. I see some concerns about risk of double changes, but I have focussed in changing as little as possible the existing configuration items, in order to minimise that.
diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h new file mode 100644 index 000000000000..dea87edd41be --- /dev/null +++ b/include/linux/cmdline.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_CMDLINE_H +#define _LINUX_CMDLINE_H + +#include <linux/string.h> + +/* Allow architectures to override strlcat, powerpc can't use strings so early */ +#ifndef cmdline_strlcat +#define cmdline_strlcat strlcat +#endif + +/* + * This function will append or prepend a builtin command line to the command + * line provided by the bootloader. Kconfig options can be used to alter + * the behavior of this builtin command line. + * @dst: The destination of the final appended/prepended string. + * @src: The starting string or NULL if there isn't one. + * @len: the length of dest buffer. + */ +static __always_inline void __cmdline_build(char *dst, const char *src, size_t len) +{ + if (!len || src == dst) + return; + + if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !src) { + dst[0] = 0; + cmdline_strlcat(dst, CONFIG_CMDLINE, len); + return; + } + + if (dst != src) + dst[0] = 0; + + if (IS_ENABLED(CONFIG_CMDLINE_PREPEND)) + cmdline_strlcat(dst, CONFIG_CMDLINE " ", len); + + cmdline_strlcat(dst, src, len); + + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND)) + cmdline_strlcat(dst, " " CONFIG_CMDLINE, len); +} + +#define cmdline_build(dst, src, len) do { \ + char *__c_dst = (dst); \ + const char *__c_src = (src); \ + \ + if (__c_src == __c_dst) { \ + static char __c_tmp[COMMAND_LINE_SIZE] __initdata = ""; \ + \ + cmdline_strlcat(__c_tmp, __c_src, COMMAND_LINE_SIZE); \ + __cmdline_build(__c_dst, __c_tmp, (len)); \ + } else { \ + __cmdline_build(__c_dst, __c_src, (len)); \ + } \ +} while (0) + +#endif /* _LINUX_CMDLINE_H */
This code provides architectures with a way to build command line based on what is built in the kernel and what is handed over by the bootloader, based on selected compile-time options. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- v3: - Addressed comments from Will - Added capability to have src == dst --- include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 include/linux/cmdline.h