diff mbox series

ASoC: max98390: Add controls for tx path

Message ID 20210402033643.12259-1-steves.lee@maximintegrated.com (mailing list archive)
State New, archived
Headers show
Series ASoC: max98390: Add controls for tx path | expand

Commit Message

Steve Lee April 2, 2021, 3:36 a.m. UTC
Add controls for tx source.

Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
---
 sound/soc/codecs/max98390.c | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Mark Brown April 2, 2021, 3:23 p.m. UTC | #1
On Fri, Apr 02, 2021 at 12:36:43PM +0900, Steve Lee wrote:

> +	SOC_SINGLE("Tx Enable Selection", MAX98390_PCM_TX_EN_A,
> +		0, 255, 0),

I'm not clear what this is (especially given the source selection below)
but it looks like it should be a mute control?

> +	SOC_SINGLE("Tx Hiz Selection", MAX98390_PCM_TX_HIZ_CTRL_A,
> +		0, 255, 0),

This I'd expect to be tied into machine driver configuration, either DT
properties or TDM slot configuration - it's not something that looks
like it's something you'd want to control at runtime.

> +	SOC_SINGLE("Tx Source Selection", MAX98390_PCM_CH_SRC_2,
> +		0, 255, 0),

This looks like it should be a DAPM control or possibly a TDM slot
configuration - look at how the Arizona devices handle routing from
multiple TDM slots for the DAPM version.
Steve Lee April 3, 2021, 1:33 a.m. UTC | #2
> -----Original Message-----
> From: Mark Brown <broonie@kernel.org>
> Sent: Saturday, April 3, 2021 12:23 AM
> To: Steve Lee <SteveS.Lee@maximintegrated.com>
> Cc: lgirdwood@gmail.com; perex@perex.cz; tiwai@suse.com;
> ckeepax@opensource.cirrus.com; geert@linux-m68k.org;
> rf@opensource.wolfsonmicro.com; shumingf@realtek.com;
> srinivas.kandagatla@linaro.org; krzk@kernel.org; dmurphy@ti.com;
> jack.yu@realtek.com; nuno.sa@analog.com; linux-kernel@vger.kernel.org;
> alsa-devel@alsa-project.org; ryan.lee.maxim@gmail.com;
> steves.lee.maxim@gmail.com
> Subject: [EXTERNAL] Re: [PATCH] ASoC: max98390: Add controls for tx path
> 
> On Fri, Apr 02, 2021 at 12:36:43PM +0900, Steve Lee wrote:
> 
> > +	SOC_SINGLE("Tx Enable Selection", MAX98390_PCM_TX_EN_A,
> > +		0, 255, 0),
> 
> I'm not clear what this is (especially given the source selection below) but it
> looks like it should be a mute control?
Yes, each channel of enable and disable control. 
I will update this also configured by TDM slot configuration.  
> 
> > +	SOC_SINGLE("Tx Hiz Selection", MAX98390_PCM_TX_HIZ_CTRL_A,
> > +		0, 255, 0),
> 
> This I'd expect to be tied into machine driver configuration, either DT properties
> or TDM slot configuration - it's not something that looks like it's something
> you'd want to control at runtime.
I will update this with either TDM slot configuration and DT properties.
> 
> > +	SOC_SINGLE("Tx Source Selection", MAX98390_PCM_CH_SRC_2,
> > +		0, 255, 0),
> 
> This looks like it should be a DAPM control or possibly a TDM slot configuration -
> look at how the Arizona devices handle routing from multiple TDM slots for the
> DAPM version.
This is for Current Sensing and Voltage sensing slot selection. I will update this as DT properties.
diff mbox series

Patch

diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c
index bb736c44e68a..163093959da8 100644
--- a/sound/soc/codecs/max98390.c
+++ b/sound/soc/codecs/max98390.c
@@ -656,6 +656,12 @@  static const struct snd_kcontrol_new max98390_snd_controls[] = {
 		MAX98390_AMP_DSP_CFG_RMP_DN_SHIFT, 1, 0),
 	SOC_SINGLE("Boost Clock Phase", MAX98390_BOOST_CTRL3,
 		MAX98390_BOOST_CLK_PHASE_CFG_SHIFT, 3, 0),
+	SOC_SINGLE("Tx Enable Selection", MAX98390_PCM_TX_EN_A,
+		0, 255, 0),
+	SOC_SINGLE("Tx Hiz Selection", MAX98390_PCM_TX_HIZ_CTRL_A,
+		0, 255, 0),
+	SOC_SINGLE("Tx Source Selection", MAX98390_PCM_CH_SRC_2,
+		0, 255, 0),
 	SOC_ENUM("Boost Output Voltage", max98390_boost_voltage),
 	SOC_ENUM("Current Limit", max98390_current_limit),
 	SOC_SINGLE_EXT("DSM Rdc", SND_SOC_NOPM, 0, 0xffffff, 0,