diff mbox series

[v3,2/3] pwm: mtk_disp: convert the driver to atomic API

Message ID 1617703062-4251-3-git-send-email-rex-bc.chen@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Convert the mtk_disp driver to aotmic API | expand

Commit Message

Rex-BC Chen (陳柏辰) April 6, 2021, 9:57 a.m. UTC
Switch the driver to atomic API apply().

Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 drivers/pwm/pwm-mtk-disp.c | 114 +++++++++++++++++++------------------
 1 file changed, 58 insertions(+), 56 deletions(-)

Comments

Uwe Kleine-König April 6, 2021, 10:19 a.m. UTC | #1
Hello,

On Tue, Apr 06, 2021 at 05:57:41PM +0800, Rex-BC Chen wrote:
> @@ -84,33 +86,47 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>  	 * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
>  	 * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
>  	 */
> +	if (!mdp->enabled) {
> +		err = clk_prepare_enable(mdp->clk_main);
> +		if (err < 0) {
> +			dev_err(chip->dev, "Can't enable mdp->clk_main: %d\n",
> +				err);

Please use %pe, as this yields better readable error messages.

Also it might be sensible to first use the fact that (without patch 1
from this series) the clocks are always on and then rework the clk usage
in a separate patch.

> +			return err;
> +		}
> +		err = clk_prepare_enable(mdp->clk_mm);
> +		if (err < 0) {
> +			dev_err(chip->dev, "Can't enable mdp->clk_mm: %d\n",
> +				err);
> +			clk_disable_unprepare(mdp->clk_main);
> +			return err;
> +		}
> +	}
>  	rate = clk_get_rate(mdp->clk_main);
> -	clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >>
> +	clk_div = div_u64(rate * state->period, NSEC_PER_SEC) >>
>  			  PWM_PERIOD_BIT_WIDTH;

rate * state->period might overflow, it would be great if this could be
catched. (But I don't consider this a stopper for this series.)

> -	if (clk_div > PWM_CLKDIV_MAX)
> +	if (clk_div > PWM_CLKDIV_MAX) {
> +		dev_err(chip->dev, "clock rate is too high: rate = %d Hz\n",
> +			rate);

rate is an u64, %d isn't the right format for it. Doesn't this result in
a compiler warning?

> +		clk_disable_unprepare(mdp->clk_mm);
> +		clk_disable_unprepare(mdp->clk_main);
>  		return -EINVAL;
> -
> +	}
>  	div = NSEC_PER_SEC * (clk_div + 1);
> -	period = div64_u64(rate * period_ns, div);
> +	period = div64_u64(rate * state->period, div);
>  	if (period > 0)
>  		period--;
>  
> -	high_width = div64_u64(rate * duty_ns, div);
> +	high_width = div64_u64(rate * state->duty_cycle, div);
>  	value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
> -
> -	err = clk_enable(mdp->clk_main);
> -	if (err < 0)
> -		return err;
> -
> -	err = clk_enable(mdp->clk_mm);
> -	if (err < 0) {
> -		clk_disable(mdp->clk_main);
> -		return err;
> -	}
> +	polarity = 0;
> +	if (state->polarity == PWM_POLARITY_INVERSED)
> +		polarity = PWM_POLARITY;

I'm unsure if support for polarity should be added en passant in this
patch. Maybe it would be clearer to add is separately.

>  	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
>  				 PWM_CLKDIV_MASK,
>  				 clk_div << PWM_CLKDIV_SHIFT);
> +	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
> +				 PWM_POLARITY, polarity);
>  	mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
>  				 PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
>  				 value);

Best regards
Uwe
kernel test robot April 6, 2021, 2:37 p.m. UTC | #2
Hi Rex-BC,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on v5.12-rc6]
[also build test WARNING on next-20210406]
[cannot apply to pwm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Rex-BC-Chen/Convert-the-mtk_disp-driver-to-aotmic-API/20210406-180018
base:    e49d033bddf5b565044e2abe4241353959bc9120
config: powerpc64-randconfig-r023-20210406 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project a46f59a747a7273cc439efaf3b4f98d8b63d2f20)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install powerpc64 cross compiling tool for clang build
        # apt-get install binutils-powerpc64-linux-gnu
        # https://github.com/0day-ci/linux/commit/0a2486ac437e3b8d36a0bf8ce9648c22e42ffda4
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Rex-BC-Chen/Convert-the-mtk_disp-driver-to-aotmic-API/20210406-180018
        git checkout 0a2486ac437e3b8d36a0bf8ce9648c22e42ffda4
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=powerpc64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:155:1: note: expanded from here
   __do_outl
   ^
   arch/powerpc/include/asm/io.h:537:62: note: expanded from macro '__do_outl'
   #define __do_outl(val, port)    writel(val,(PCI_IO_ADDR)_IO_BASE+port);
                                              ~~~~~~~~~~~~~~~~~~~~~^
   In file included from drivers/pwm/pwm-mtk-disp.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:619:
   arch/powerpc/include/asm/io-defs.h:43:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:169:1: note: expanded from here
   __do_insb
   ^
   arch/powerpc/include/asm/io.h:556:56: note: expanded from macro '__do_insb'
   #define __do_insb(p, b, n)      readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
                                          ~~~~~~~~~~~~~~~~~~~~~^
   In file included from drivers/pwm/pwm-mtk-disp.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:619:
   arch/powerpc/include/asm/io-defs.h:45:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:171:1: note: expanded from here
   __do_insw
   ^
   arch/powerpc/include/asm/io.h:557:56: note: expanded from macro '__do_insw'
   #define __do_insw(p, b, n)      readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
                                          ~~~~~~~~~~~~~~~~~~~~~^
   In file included from drivers/pwm/pwm-mtk-disp.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:619:
   arch/powerpc/include/asm/io-defs.h:47:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:173:1: note: expanded from here
   __do_insl
   ^
   arch/powerpc/include/asm/io.h:558:56: note: expanded from macro '__do_insl'
   #define __do_insl(p, b, n)      readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
                                          ~~~~~~~~~~~~~~~~~~~~~^
   In file included from drivers/pwm/pwm-mtk-disp.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:619:
   arch/powerpc/include/asm/io-defs.h:49:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:175:1: note: expanded from here
   __do_outsb
   ^
   arch/powerpc/include/asm/io.h:559:58: note: expanded from macro '__do_outsb'
   #define __do_outsb(p, b, n)     writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
                                           ~~~~~~~~~~~~~~~~~~~~~^
   In file included from drivers/pwm/pwm-mtk-disp.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:619:
   arch/powerpc/include/asm/io-defs.h:51:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:177:1: note: expanded from here
   __do_outsw
   ^
   arch/powerpc/include/asm/io.h:560:58: note: expanded from macro '__do_outsw'
   #define __do_outsw(p, b, n)     writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
                                           ~~~~~~~~~~~~~~~~~~~~~^
   In file included from drivers/pwm/pwm-mtk-disp.c:10:
   In file included from include/linux/io.h:13:
   In file included from arch/powerpc/include/asm/io.h:619:
   arch/powerpc/include/asm/io-defs.h:53:1: warning: performing pointer arithmetic on a null pointer has undefined behavior [-Wnull-pointer-arithmetic]
   DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c),
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/powerpc/include/asm/io.h:616:3: note: expanded from macro 'DEF_PCI_AC_NORET'
                   __do_##name al;                                 \
                   ^~~~~~~~~~~~~~
   <scratch space>:179:1: note: expanded from here
   __do_outsl
   ^
   arch/powerpc/include/asm/io.h:561:58: note: expanded from macro '__do_outsl'
   #define __do_outsl(p, b, n)     writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
                                           ~~~~~~~~~~~~~~~~~~~~~^
>> drivers/pwm/pwm-mtk-disp.c:109:4: warning: format specifies type 'int' but the argument has type 'u64' (aka 'unsigned long long') [-Wformat]
                           rate);
                           ^~~~
   include/linux/dev_printk.h:112:32: note: expanded from macro 'dev_err'
           _dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__)
                                 ~~~     ^~~~~~~~~~~
   13 warnings generated.


vim +109 drivers/pwm/pwm-mtk-disp.c

    70	
    71	static int mtk_disp_pwm_enable(struct pwm_chip *chip,
    72				       const struct pwm_state *state)
    73	{
    74		struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
    75		u32 clk_div, period, high_width, value, polarity;
    76		u64 div, rate;
    77		int err;
    78	
    79		/*
    80		 * Find period, high_width and clk_div to suit duty_ns and period_ns.
    81		 * Calculate proper div value to keep period value in the bound.
    82		 *
    83		 * period_ns = 10^9 * (clk_div + 1) * (period + 1) / PWM_CLK_RATE
    84		 * duty_ns = 10^9 * (clk_div + 1) * high_width / PWM_CLK_RATE
    85		 *
    86		 * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
    87		 * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
    88		 */
    89		if (!mdp->enabled) {
    90			err = clk_prepare_enable(mdp->clk_main);
    91			if (err < 0) {
    92				dev_err(chip->dev, "Can't enable mdp->clk_main: %d\n",
    93					err);
    94				return err;
    95			}
    96			err = clk_prepare_enable(mdp->clk_mm);
    97			if (err < 0) {
    98				dev_err(chip->dev, "Can't enable mdp->clk_mm: %d\n",
    99					err);
   100				clk_disable_unprepare(mdp->clk_main);
   101				return err;
   102			}
   103		}
   104		rate = clk_get_rate(mdp->clk_main);
   105		clk_div = div_u64(rate * state->period, NSEC_PER_SEC) >>
   106				  PWM_PERIOD_BIT_WIDTH;
   107		if (clk_div > PWM_CLKDIV_MAX) {
   108			dev_err(chip->dev, "clock rate is too high: rate = %d Hz\n",
 > 109				rate);
   110			clk_disable_unprepare(mdp->clk_mm);
   111			clk_disable_unprepare(mdp->clk_main);
   112			return -EINVAL;
   113		}
   114		div = NSEC_PER_SEC * (clk_div + 1);
   115		period = div64_u64(rate * state->period, div);
   116		if (period > 0)
   117			period--;
   118	
   119		high_width = div64_u64(rate * state->duty_cycle, div);
   120		value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
   121		polarity = 0;
   122		if (state->polarity == PWM_POLARITY_INVERSED)
   123			polarity = PWM_POLARITY;
   124	
   125		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
   126					 PWM_CLKDIV_MASK,
   127					 clk_div << PWM_CLKDIV_SHIFT);
   128		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
   129					 PWM_POLARITY, polarity);
   130		mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
   131					 PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
   132					 value);
   133	
   134		if (mdp->data->has_commit) {
   135			mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
   136						 mdp->data->commit_mask,
   137						 mdp->data->commit_mask);
   138			mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
   139						 mdp->data->commit_mask,
   140						 0x0);
   141		} else {
   142			mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
   143						 mdp->data->bls_debug_mask,
   144						 mdp->data->bls_debug_mask);
   145			mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
   146						 mdp->data->con0_sel,
   147						 mdp->data->con0_sel);
   148		}
   149	
   150		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
   151					 mdp->data->enable_mask);
   152		mdp->enabled = true;
   153		return 0;
   154	}
   155	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
kernel test robot April 6, 2021, 2:52 p.m. UTC | #3
Hi Rex-BC,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on v5.12-rc6]
[also build test WARNING on next-20210401]
[cannot apply to pwm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Rex-BC-Chen/Convert-the-mtk_disp-driver-to-aotmic-API/20210406-180018
base:    e49d033bddf5b565044e2abe4241353959bc9120
config: xtensa-allyesconfig (attached as .config)
compiler: xtensa-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/0a2486ac437e3b8d36a0bf8ce9648c22e42ffda4
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Rex-BC-Chen/Convert-the-mtk_disp-driver-to-aotmic-API/20210406-180018
        git checkout 0a2486ac437e3b8d36a0bf8ce9648c22e42ffda4
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=xtensa 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   In file included from include/linux/device.h:15,
                    from include/linux/node.h:18,
                    from include/linux/cpu.h:17,
                    from include/linux/of_device.h:5,
                    from drivers/pwm/pwm-mtk-disp.c:13:
   drivers/pwm/pwm-mtk-disp.c: In function 'mtk_disp_pwm_enable':
>> drivers/pwm/pwm-mtk-disp.c:108:22: warning: format '%d' expects argument of type 'int', but argument 3 has type 'u64' {aka 'long long unsigned int'} [-Wformat=]
     108 |   dev_err(chip->dev, "clock rate is too high: rate = %d Hz\n",
         |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/dev_printk.h:19:22: note: in definition of macro 'dev_fmt'
      19 | #define dev_fmt(fmt) fmt
         |                      ^~~
   drivers/pwm/pwm-mtk-disp.c:108:3: note: in expansion of macro 'dev_err'
     108 |   dev_err(chip->dev, "clock rate is too high: rate = %d Hz\n",
         |   ^~~~~~~
   drivers/pwm/pwm-mtk-disp.c:108:55: note: format string is defined here
     108 |   dev_err(chip->dev, "clock rate is too high: rate = %d Hz\n",
         |                                                      ~^
         |                                                       |
         |                                                       int
         |                                                      %lld


vim +108 drivers/pwm/pwm-mtk-disp.c

    70	
    71	static int mtk_disp_pwm_enable(struct pwm_chip *chip,
    72				       const struct pwm_state *state)
    73	{
    74		struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
    75		u32 clk_div, period, high_width, value, polarity;
    76		u64 div, rate;
    77		int err;
    78	
    79		/*
    80		 * Find period, high_width and clk_div to suit duty_ns and period_ns.
    81		 * Calculate proper div value to keep period value in the bound.
    82		 *
    83		 * period_ns = 10^9 * (clk_div + 1) * (period + 1) / PWM_CLK_RATE
    84		 * duty_ns = 10^9 * (clk_div + 1) * high_width / PWM_CLK_RATE
    85		 *
    86		 * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
    87		 * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
    88		 */
    89		if (!mdp->enabled) {
    90			err = clk_prepare_enable(mdp->clk_main);
    91			if (err < 0) {
    92				dev_err(chip->dev, "Can't enable mdp->clk_main: %d\n",
    93					err);
    94				return err;
    95			}
    96			err = clk_prepare_enable(mdp->clk_mm);
    97			if (err < 0) {
    98				dev_err(chip->dev, "Can't enable mdp->clk_mm: %d\n",
    99					err);
   100				clk_disable_unprepare(mdp->clk_main);
   101				return err;
   102			}
   103		}
   104		rate = clk_get_rate(mdp->clk_main);
   105		clk_div = div_u64(rate * state->period, NSEC_PER_SEC) >>
   106				  PWM_PERIOD_BIT_WIDTH;
   107		if (clk_div > PWM_CLKDIV_MAX) {
 > 108			dev_err(chip->dev, "clock rate is too high: rate = %d Hz\n",
   109				rate);
   110			clk_disable_unprepare(mdp->clk_mm);
   111			clk_disable_unprepare(mdp->clk_main);
   112			return -EINVAL;
   113		}
   114		div = NSEC_PER_SEC * (clk_div + 1);
   115		period = div64_u64(rate * state->period, div);
   116		if (period > 0)
   117			period--;
   118	
   119		high_width = div64_u64(rate * state->duty_cycle, div);
   120		value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
   121		polarity = 0;
   122		if (state->polarity == PWM_POLARITY_INVERSED)
   123			polarity = PWM_POLARITY;
   124	
   125		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
   126					 PWM_CLKDIV_MASK,
   127					 clk_div << PWM_CLKDIV_SHIFT);
   128		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
   129					 PWM_POLARITY, polarity);
   130		mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
   131					 PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
   132					 value);
   133	
   134		if (mdp->data->has_commit) {
   135			mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
   136						 mdp->data->commit_mask,
   137						 mdp->data->commit_mask);
   138			mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
   139						 mdp->data->commit_mask,
   140						 0x0);
   141		} else {
   142			mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
   143						 mdp->data->bls_debug_mask,
   144						 mdp->data->bls_debug_mask);
   145			mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
   146						 mdp->data->con0_sel,
   147						 mdp->data->con0_sel);
   148		}
   149	
   150		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
   151					 mdp->data->enable_mask);
   152		mdp->enabled = true;
   153		return 0;
   154	}
   155	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 21416a8b6b47..502228adf718 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -20,6 +20,7 @@ 
 #define PWM_CLKDIV_SHIFT	16
 #define PWM_CLKDIV_MAX		0x3ff
 #define PWM_CLKDIV_MASK		(PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
+#define PWM_POLARITY	BIT(2)
 
 #define PWM_PERIOD_BIT_WIDTH	12
 #define PWM_PERIOD_MASK		((1 << PWM_PERIOD_BIT_WIDTH) - 1)
@@ -47,6 +48,7 @@  struct mtk_disp_pwm {
 	struct clk *clk_main;
 	struct clk *clk_mm;
 	void __iomem *base;
+	bool enabled;
 };
 
 static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
@@ -66,11 +68,11 @@  static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset,
 	writel(value, address);
 }
 
-static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			       int duty_ns, int period_ns)
+static int mtk_disp_pwm_enable(struct pwm_chip *chip,
+			       const struct pwm_state *state)
 {
 	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
-	u32 clk_div, period, high_width, value;
+	u32 clk_div, period, high_width, value, polarity;
 	u64 div, rate;
 	int err;
 
@@ -84,33 +86,47 @@  static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * period = (PWM_CLK_RATE * period_ns) / (10^9 * (clk_div + 1)) - 1
 	 * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
 	 */
+	if (!mdp->enabled) {
+		err = clk_prepare_enable(mdp->clk_main);
+		if (err < 0) {
+			dev_err(chip->dev, "Can't enable mdp->clk_main: %d\n",
+				err);
+			return err;
+		}
+		err = clk_prepare_enable(mdp->clk_mm);
+		if (err < 0) {
+			dev_err(chip->dev, "Can't enable mdp->clk_mm: %d\n",
+				err);
+			clk_disable_unprepare(mdp->clk_main);
+			return err;
+		}
+	}
 	rate = clk_get_rate(mdp->clk_main);
-	clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >>
+	clk_div = div_u64(rate * state->period, NSEC_PER_SEC) >>
 			  PWM_PERIOD_BIT_WIDTH;
-	if (clk_div > PWM_CLKDIV_MAX)
+	if (clk_div > PWM_CLKDIV_MAX) {
+		dev_err(chip->dev, "clock rate is too high: rate = %d Hz\n",
+			rate);
+		clk_disable_unprepare(mdp->clk_mm);
+		clk_disable_unprepare(mdp->clk_main);
 		return -EINVAL;
-
+	}
 	div = NSEC_PER_SEC * (clk_div + 1);
-	period = div64_u64(rate * period_ns, div);
+	period = div64_u64(rate * state->period, div);
 	if (period > 0)
 		period--;
 
-	high_width = div64_u64(rate * duty_ns, div);
+	high_width = div64_u64(rate * state->duty_cycle, div);
 	value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
-
-	err = clk_enable(mdp->clk_main);
-	if (err < 0)
-		return err;
-
-	err = clk_enable(mdp->clk_mm);
-	if (err < 0) {
-		clk_disable(mdp->clk_main);
-		return err;
-	}
+	polarity = 0;
+	if (state->polarity == PWM_POLARITY_INVERSED)
+		polarity = PWM_POLARITY;
 
 	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
 				 PWM_CLKDIV_MASK,
 				 clk_div << PWM_CLKDIV_SHIFT);
+	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+				 PWM_POLARITY, polarity);
 	mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
 				 PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
 				 value);
@@ -122,50 +138,49 @@  static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
 					 mdp->data->commit_mask,
 					 0x0);
+	} else {
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+					 mdp->data->con0_sel,
+					 mdp->data->con0_sel);
 	}
 
-	clk_disable(mdp->clk_mm);
-	clk_disable(mdp->clk_main);
-
+	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+				 mdp->data->enable_mask);
+	mdp->enabled = true;
 	return 0;
 }
 
-static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+static int mtk_disp_pwm_disable(struct pwm_chip *chip,
+				const struct pwm_state *state)
 {
 	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
-	int err;
-
-	err = clk_enable(mdp->clk_main);
-	if (err < 0)
-		return err;
 
-	err = clk_enable(mdp->clk_mm);
-	if (err < 0) {
-		clk_disable(mdp->clk_main);
-		return err;
+	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+				 0x0);
+	if (mdp->enabled) {
+		clk_disable_unprepare(mdp->clk_mm);
+		clk_disable_unprepare(mdp->clk_main);
 	}
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-				 mdp->data->enable_mask);
+	mdp->enabled = false;
 
 	return 0;
 }
 
-static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
 {
-	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+	if (!state->enabled)
+		return mtk_disp_pwm_disable(chip, state);
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-				 0x0);
-
-	clk_disable(mdp->clk_mm);
-	clk_disable(mdp->clk_main);
+	return mtk_disp_pwm_enable(chip, state);
 }
 
 static const struct pwm_ops mtk_disp_pwm_ops = {
-	.config = mtk_disp_pwm_config,
-	.enable = mtk_disp_pwm_enable,
-	.disable = mtk_disp_pwm_disable,
+	.apply = mtk_disp_pwm_apply,
 	.owner = THIS_MODULE,
 };
 
@@ -205,19 +220,6 @@  static int mtk_disp_pwm_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mdp);
 
-	/*
-	 * For MT2701, disable double buffer before writing register
-	 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
-	 */
-	if (!mdp->data->has_commit) {
-		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
-					 mdp->data->bls_debug_mask,
-					 mdp->data->bls_debug_mask);
-		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
-					 mdp->data->con0_sel,
-					 mdp->data->con0_sel);
-	}
-
 	return 0;
 }