diff mbox series

[RFC,net-next,2/4] net: dsa: mt7530: add interrupt support

Message ID 20210406141819.1025864-3-dqfext@gmail.com (mailing list archive)
State New, archived
Headers show
Series MT7530 interrupt support | expand

Commit Message

Qingfang Deng April 6, 2021, 2:18 p.m. UTC
Add support for MT7530 interrupt controller to handle internal PHYs.
In order to assign an IRQ number to each PHY, the registration of MDIO bus
is also done in this driver.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
 drivers/net/dsa/mt7530.c | 203 +++++++++++++++++++++++++++++++++++----
 drivers/net/dsa/mt7530.h |  18 +++-
 2 files changed, 200 insertions(+), 21 deletions(-)

Comments

Andrew Lunn April 6, 2021, 3:30 p.m. UTC | #1
On Tue, Apr 06, 2021 at 10:18:17PM +0800, DENG Qingfang wrote:
> Add support for MT7530 interrupt controller to handle internal PHYs.

Are the interrupts purely PHY interrupts? Or are there some switch
operation interrupts, which are currently not used?

I'm just wondering if it is correct to so closely tie interrupts and
MDIO together.

     Andrew
Qingfang Deng April 6, 2021, 3:39 p.m. UTC | #2
On Tue, Apr 6, 2021 at 11:30 PM Andrew Lunn <andrew@lunn.ch> wrote:
>
> On Tue, Apr 06, 2021 at 10:18:17PM +0800, DENG Qingfang wrote:
> > Add support for MT7530 interrupt controller to handle internal PHYs.
>
> Are the interrupts purely PHY interrupts? Or are there some switch
> operation interrupts, which are currently not used?

There are other switch operations interrupts as well, such as VLAN
member violation, switch ACL hit.

>
> I'm just wondering if it is correct to so closely tie interrupts and
> MDIO together.
>
>      Andrew
Andrew Lunn April 6, 2021, 3:49 p.m. UTC | #3
On Tue, Apr 06, 2021 at 11:39:12PM +0800, DENG Qingfang wrote:
> On Tue, Apr 6, 2021 at 11:30 PM Andrew Lunn <andrew@lunn.ch> wrote:
> >
> > On Tue, Apr 06, 2021 at 10:18:17PM +0800, DENG Qingfang wrote:
> > > Add support for MT7530 interrupt controller to handle internal PHYs.
> >
> > Are the interrupts purely PHY interrupts? Or are there some switch
> > operation interrupts, which are currently not used?
> 
> There are other switch operations interrupts as well, such as VLAN
> member violation, switch ACL hit.

O.K. So that makes it similar to the mv88e6xxx. With that driver, i
kept interrupt setup and mdio setup separate. I add the interrupt
controller first, and then do mdio setup, calling a helper to map the
PHY interrupts and assign them to bus->irq[].

That gives you a cleaner structure when you start using the other
interrupts.

	Andrew
Qingfang Deng April 6, 2021, 4:02 p.m. UTC | #4
On Tue, Apr 6, 2021 at 11:49 PM Andrew Lunn <andrew@lunn.ch> wrote:
> O.K. So that makes it similar to the mv88e6xxx. With that driver, i
> kept interrupt setup and mdio setup separate. I add the interrupt
> controller first, and then do mdio setup, calling a helper to map the
> PHY interrupts and assign them to bus->irq[].
>
> That gives you a cleaner structure when you start using the other
> interrupts.

Okay. Will split the function in v2. Thanks.

>
>         Andrew
diff mbox series

Patch

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 2bd1bab71497..4c334e90090b 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -10,6 +10,7 @@ 
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
+#include <linux/of_irq.h>
 #include <linux/of_mdio.h>
 #include <linux/of_net.h>
 #include <linux/of_platform.h>
@@ -596,18 +597,14 @@  mt7530_mib_reset(struct dsa_switch *ds)
 	mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
 }
 
-static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
+static int mt7530_phy_read(struct mt7530_priv *priv, int port, int regnum)
 {
-	struct mt7530_priv *priv = ds->priv;
-
 	return mdiobus_read_nested(priv->bus, port, regnum);
 }
 
-static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum,
+static int mt7530_phy_write(struct mt7530_priv *priv, int port, int regnum,
 			    u16 val)
 {
-	struct mt7530_priv *priv = ds->priv;
-
 	return mdiobus_write_nested(priv->bus, port, regnum, val);
 }
 
@@ -785,9 +782,8 @@  mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
 }
 
 static int
-mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum)
+mt7531_ind_phy_read(struct mt7530_priv *priv, int port, int regnum)
 {
-	struct mt7530_priv *priv = ds->priv;
 	int devad;
 	int ret;
 
@@ -803,10 +799,9 @@  mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum)
 }
 
 static int
-mt7531_ind_phy_write(struct dsa_switch *ds, int port, int regnum,
+mt7531_ind_phy_write(struct mt7530_priv *priv, int port, int regnum,
 		     u16 data)
 {
-	struct mt7530_priv *priv = ds->priv;
 	int devad;
 	int ret;
 
@@ -1828,6 +1823,159 @@  mt7530_setup_gpio(struct mt7530_priv *priv)
 }
 #endif /* CONFIG_GPIOLIB */
 
+static irqreturn_t
+mt7530_irq(int irq, void *data)
+{
+	struct mt7530_priv *priv = data;
+	bool handled = false;
+	u32 val;
+	int p;
+
+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+	val = mt7530_mii_read(priv, MT7530_SYS_INT_STS);
+	mt7530_mii_write(priv, MT7530_SYS_INT_STS, val);
+	mutex_unlock(&priv->bus->mdio_lock);
+
+	for (p = 0; p < MT7530_NUM_PHYS; p++) {
+		if (BIT(p) & val) {
+			handle_nested_irq(irq_find_mapping(priv->irq_domain,
+					  p));
+			handled = true;
+		}
+	}
+
+	return IRQ_RETVAL(handled);
+}
+
+static void
+mt7530_irq_mask(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	priv->irq_enable &= ~BIT(d->hwirq);
+}
+
+static void
+mt7530_irq_unmask(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	priv->irq_enable |= BIT(d->hwirq);
+}
+
+static void
+mt7530_irq_bus_lock(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
+}
+
+static void
+mt7530_irq_bus_sync_unlock(struct irq_data *d)
+{
+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
+
+	mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
+	mutex_unlock(&priv->bus->mdio_lock);
+}
+
+static struct irq_chip mt7530_irq_chip = {
+	.name = KBUILD_MODNAME,
+	.irq_mask = mt7530_irq_mask,
+	.irq_unmask = mt7530_irq_unmask,
+	.irq_bus_lock = mt7530_irq_bus_lock,
+	.irq_bus_sync_unlock = mt7530_irq_bus_sync_unlock,
+};
+
+static int
+mt7530_irq_map(struct irq_domain *domain, unsigned int irq,
+	       irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(irq, domain->host_data);
+	irq_set_chip_and_handler(irq, &mt7530_irq_chip, handle_simple_irq);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops mt7530_irq_domain_ops = {
+	.map = mt7530_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int
+mt7530_setup_mdiobus_irq(struct mt7530_priv *priv)
+{
+	struct device *dev = priv->dev;
+	struct device_node *np = dev->of_node;
+	struct dsa_switch *ds = priv->ds;
+	int parent_irq, ret, p;
+	struct mii_bus *bus;
+	static int idx;
+
+	bus = devm_mdiobus_alloc(dev);
+	if (!bus)
+		return -ENOMEM;
+
+	ds->slave_mii_bus = bus;
+	bus->priv = priv;
+	bus->name = KBUILD_MODNAME "-mii";
+	snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
+	bus->read = mt753x_phy_read;
+	bus->write = mt753x_phy_write;
+	bus->parent = dev;
+	bus->phy_mask = ~ds->phys_mii_mask;
+
+	if (!of_property_read_bool(np, "interrupt-controller")) {
+		dev_info(dev, "no interrupt support\n");
+		goto register_mdiobus;
+	}
+
+	parent_irq = of_irq_get(np, 0);
+	if (parent_irq <= 0) {
+		dev_err(dev, "failed to get parent IRQ: %d\n", parent_irq);
+		return parent_irq ? : -EINVAL;
+	}
+
+	priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
+						&mt7530_irq_domain_ops, priv);
+	if (!priv->irq_domain) {
+		dev_err(dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	/* This register must be set for MT7530 to properly fire interrupts */
+	if (priv->id != ID_MT7531)
+		mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL);
+
+	ret = devm_request_threaded_irq(dev, parent_irq, NULL, mt7530_irq,
+					IRQF_ONESHOT, KBUILD_MODNAME, priv);
+	if (ret) {
+		dev_err(dev, "failed to request IRQ: %d\n", ret);
+		return ret;
+	}
+
+	for (p = 0; p < MT7530_NUM_PHYS; p++) {
+		if (BIT(p) & ds->phys_mii_mask) {
+			unsigned int irq;
+
+			irq = irq_create_mapping(priv->irq_domain, p);
+			irq_set_parent(irq, parent_irq);
+			bus->irq[p] = irq;
+		}
+	}
+
+register_mdiobus:
+	ret = mdiobus_register(bus);
+	if (ret) {
+		dev_err(dev, "failed to register MDIO bus: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int
 mt7530_setup(struct dsa_switch *ds)
 {
@@ -2780,32 +2928,34 @@  static int
 mt753x_setup(struct dsa_switch *ds)
 {
 	struct mt7530_priv *priv = ds->priv;
+	int ret = priv->info->sw_setup(ds);
+
+	if (!ret)
+		ret = mt7530_setup_mdiobus_irq(priv);
 
-	return priv->info->sw_setup(ds);
+	return ret;
 }
 
 static int
-mt753x_phy_read(struct dsa_switch *ds, int port, int regnum)
+mt753x_phy_read(struct mii_bus *bus, int port, int regnum)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct mt7530_priv *priv = bus->priv;
 
-	return priv->info->phy_read(ds, port, regnum);
+	return priv->info->phy_read(priv, port, regnum);
 }
 
 static int
-mt753x_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+mt753x_phy_write(struct mii_bus *bus, int port, int regnum, u16 val)
 {
-	struct mt7530_priv *priv = ds->priv;
+	struct mt7530_priv *priv = bus->priv;
 
-	return priv->info->phy_write(ds, port, regnum, val);
+	return priv->info->phy_write(priv, port, regnum, val);
 }
 
 static const struct dsa_switch_ops mt7530_switch_ops = {
 	.get_tag_protocol	= mtk_get_tag_protocol,
 	.setup			= mt753x_setup,
 	.get_strings		= mt7530_get_strings,
-	.phy_read		= mt753x_phy_read,
-	.phy_write		= mt753x_phy_write,
 	.get_ethtool_stats	= mt7530_get_ethtool_stats,
 	.get_sset_count		= mt7530_get_sset_count,
 	.set_ageing_time	= mt7530_set_ageing_time,
@@ -2986,6 +3136,21 @@  mt7530_remove(struct mdio_device *mdiodev)
 		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
 			ret);
 
+	if (priv->irq_domain) {
+		int p;
+
+		for (p = 0; p < MT7530_NUM_PHYS; p++) {
+			if (BIT(p) & priv->ds->phys_mii_mask) {
+				unsigned int irq;
+
+				irq = irq_find_mapping(priv->irq_domain, p);
+				irq_dispose_mapping(irq);
+			}
+		}
+
+		irq_domain_remove(priv->irq_domain);
+	}
+
 	dsa_unregister_switch(priv->ds);
 	mutex_destroy(&priv->reg_mutex);
 }
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ec36ea5dfd57..e4429e152cde 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -7,6 +7,7 @@ 
 #define __MT7530_H
 
 #define MT7530_NUM_PORTS		7
+#define MT7530_NUM_PHYS			5
 #define MT7530_CPU_PORT			6
 #define MT7530_NUM_FDB_RECORDS		2048
 #define MT7530_ALL_MEMBERS		0xff
@@ -381,6 +382,12 @@  enum mt7531_sgmii_force_duplex {
 #define  SYS_CTRL_SW_RST		BIT(1)
 #define  SYS_CTRL_REG_RST		BIT(0)
 
+/* Register for system interrupt */
+#define MT7530_SYS_INT_EN		0x7008
+
+/* Register for system interrupt status */
+#define MT7530_SYS_INT_STS		0x700c
+
 /* Register for PHY Indirect Access Control */
 #define MT7531_PHY_IAC			0x701C
 #define  MT7531_PHY_ACS_ST		BIT(31)
@@ -702,6 +709,11 @@  static const char *p5_intf_modes(unsigned int p5_interface)
 	}
 }
 
+/* Forward declaration */
+struct mt7530_priv;
+static int mt753x_phy_read(struct mii_bus *, int, int);
+static int mt753x_phy_write(struct mii_bus *, int, int, u16);
+
 /* struct mt753x_info -	This is the main data structure for holding the specific
  *			part for each supported device
  * @sw_setup:		Holding the handler to a device initialization
@@ -726,8 +738,8 @@  struct mt753x_info {
 	enum mt753x_id id;
 
 	int (*sw_setup)(struct dsa_switch *ds);
-	int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
-	int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val);
+	int (*phy_read)(struct mt7530_priv *priv, int port, int regnum);
+	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
 	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
 	int (*cpu_port_config)(struct dsa_switch *ds, int port);
 	bool (*phy_mode_supported)(struct dsa_switch *ds, int port,
@@ -782,6 +794,8 @@  struct mt7530_priv {
 	struct mt7530_port	ports[MT7530_NUM_PORTS];
 	/* protect among processes for registers access*/
 	struct mutex reg_mutex;
+	struct irq_domain *irq_domain;
+	u32 irq_enable;
 };
 
 struct mt7530_hw_vlan_entry {