Message ID | 20210413204818.23350-2-tsbogend@alpha.franken.de (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | net: Korina improvements | expand |
Context | Check | Description |
---|---|---|
netdev/cover_letter | success | Link |
netdev/fixes_present | success | Link |
netdev/patch_count | success | Link |
netdev/tree_selection | success | Clearly marked for net-next |
netdev/subject_prefix | success | Link |
netdev/cc_maintainers | warning | 5 maintainers not CCed: rppt@kernel.org vvidic@valentin-vidic.from.hr akpm@linux-foundation.org vincent.stehle@laposte.net willemb@google.com |
netdev/source_inline | success | Was 0 now: 0 |
netdev/verify_signedoff | success | Link |
netdev/module_param | success | Was 0 now: 0 |
netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
netdev/verify_fixes | success | Link |
netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 107 lines checked |
netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
netdev/header_inline | success | Link |
> +static int korina_mdio_wait(struct korina_private *lp) > +{ > + int timeout = 1000; > + > + while ((readl(&lp->eth_regs->miimind) & 1) && timeout-- > 0) > + udelay(1); > + > + if (timeout <= 0) > + return -1; > + > + return 0; Using readl_poll_timeout_atomic() would be better. > +} > + > +static int korina_mdio_read(struct net_device *dev, int phy, int reg) > { > struct korina_private *lp = netdev_priv(dev); > int ret; > > - mii_id = ((lp->rx_irq == 0x2c ? 1 : 0) << 8); > + if (korina_mdio_wait(lp)) > + return -1; This should really be -ETIMEDOUT > dev->watchdog_timeo = TX_TIMEOUT; > netif_napi_add(dev, &lp->napi, korina_poll, NAPI_POLL_WEIGHT); > > - lp->phy_addr = (((lp->rx_irq == 0x2c? 1:0) << 8) | 0x05); > lp->mii_if.dev = dev; > - lp->mii_if.mdio_read = mdio_read; > - lp->mii_if.mdio_write = mdio_write; > - lp->mii_if.phy_id = lp->phy_addr; > + lp->mii_if.mdio_read = korina_mdio_read; > + lp->mii_if.mdio_write = korina_mdio_write; > + lp->mii_if.phy_id = 1; > lp->mii_if.phy_id_mask = 0x1f; > lp->mii_if.reg_num_mask = 0x1f; You could also replace all the mii code with phylib. Andrew
On Wed, Apr 14, 2021 at 09:36:04PM +0200, Andrew Lunn wrote: > > +static int korina_mdio_wait(struct korina_private *lp) > > +{ > > + int timeout = 1000; > > + > > + while ((readl(&lp->eth_regs->miimind) & 1) && timeout-- > 0) > > + udelay(1); > > + > > + if (timeout <= 0) > > + return -1; > > + > > + return 0; > > Using readl_poll_timeout_atomic() would be better. I'll have a look > > > > +} > > + > > +static int korina_mdio_read(struct net_device *dev, int phy, int reg) > > { > > struct korina_private *lp = netdev_priv(dev); > > int ret; > > > > - mii_id = ((lp->rx_irq == 0x2c ? 1 : 0) << 8); > > + if (korina_mdio_wait(lp)) > > + return -1; > > This should really be -ETIMEDOUT ok. > > dev->watchdog_timeo = TX_TIMEOUT; > > netif_napi_add(dev, &lp->napi, korina_poll, NAPI_POLL_WEIGHT); > > > > - lp->phy_addr = (((lp->rx_irq == 0x2c? 1:0) << 8) | 0x05); > > lp->mii_if.dev = dev; > > - lp->mii_if.mdio_read = mdio_read; > > - lp->mii_if.mdio_write = mdio_write; > > - lp->mii_if.phy_id = lp->phy_addr; > > + lp->mii_if.mdio_read = korina_mdio_read; > > + lp->mii_if.mdio_write = korina_mdio_write; > > + lp->mii_if.phy_id = 1; > > lp->mii_if.phy_id_mask = 0x1f; > > lp->mii_if.reg_num_mask = 0x1f; > > You could also replace all the mii code with phylib. that's on my todo. Thomas.
diff --git a/drivers/net/ethernet/korina.c b/drivers/net/ethernet/korina.c index 925161959b9b..2266b18c1377 100644 --- a/drivers/net/ethernet/korina.c +++ b/drivers/net/ethernet/korina.c @@ -137,7 +137,6 @@ struct korina_private { struct mii_if_info mii_if; struct work_struct restart_task; struct net_device *dev; - int phy_addr; }; extern unsigned int idt_cpu_freq; @@ -292,32 +291,50 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } -static int mdio_read(struct net_device *dev, int mii_id, int reg) +static int korina_mdio_wait(struct korina_private *lp) +{ + int timeout = 1000; + + while ((readl(&lp->eth_regs->miimind) & 1) && timeout-- > 0) + udelay(1); + + if (timeout <= 0) + return -1; + + return 0; +} + +static int korina_mdio_read(struct net_device *dev, int phy, int reg) { struct korina_private *lp = netdev_priv(dev); int ret; - mii_id = ((lp->rx_irq == 0x2c ? 1 : 0) << 8); + if (korina_mdio_wait(lp)) + return -1; - writel(0, &lp->eth_regs->miimcfg); - writel(0, &lp->eth_regs->miimcmd); - writel(mii_id | reg, &lp->eth_regs->miimaddr); - writel(ETH_MII_CMD_SCN, &lp->eth_regs->miimcmd); + writel(phy << 8 | reg, &lp->eth_regs->miimaddr); + writel(1, &lp->eth_regs->miimcmd); - ret = (int)(readl(&lp->eth_regs->miimrdd)); + if (korina_mdio_wait(lp)) + return -1; + + if (readl(&lp->eth_regs->miimind) & 4) + return -1; + + ret = readl(&lp->eth_regs->miimrdd); + writel(0, &lp->eth_regs->miimcmd); return ret; } -static void mdio_write(struct net_device *dev, int mii_id, int reg, int val) +static void korina_mdio_write(struct net_device *dev, int phy, int reg, int val) { struct korina_private *lp = netdev_priv(dev); - mii_id = ((lp->rx_irq == 0x2c ? 1 : 0) << 8); + if (korina_mdio_wait(lp)) + return; - writel(0, &lp->eth_regs->miimcfg); - writel(1, &lp->eth_regs->miimcmd); - writel(mii_id | reg, &lp->eth_regs->miimaddr); - writel(ETH_MII_CMD_SCN, &lp->eth_regs->miimcmd); + writel(0, &lp->eth_regs->miimcmd); + writel(phy << 8 | reg, &lp->eth_regs->miimaddr); writel(val, &lp->eth_regs->miimwtd); } @@ -643,7 +660,7 @@ static void korina_check_media(struct net_device *dev, unsigned int init_media) { struct korina_private *lp = netdev_priv(dev); - mii_check_media(&lp->mii_if, 0, init_media); + mii_check_media(&lp->mii_if, 1, init_media); if (lp->mii_if.full_duplex) writel(readl(&lp->eth_regs->ethmac2) | ETH_MAC2_FD, @@ -869,12 +886,15 @@ static int korina_init(struct net_device *dev) * Clock independent setting */ writel(((idt_cpu_freq) / MII_CLOCK + 1) & ~1, &lp->eth_regs->ethmcp); + writel(0, &lp->eth_regs->miimcfg); /* don't transmit until fifo contains 48b */ writel(48, &lp->eth_regs->ethfifott); writel(ETH_MAC1_RE, &lp->eth_regs->ethmac1); + korina_check_media(dev, 1); + napi_enable(&lp->napi); netif_start_queue(dev); @@ -1089,11 +1109,10 @@ static int korina_probe(struct platform_device *pdev) dev->watchdog_timeo = TX_TIMEOUT; netif_napi_add(dev, &lp->napi, korina_poll, NAPI_POLL_WEIGHT); - lp->phy_addr = (((lp->rx_irq == 0x2c? 1:0) << 8) | 0x05); lp->mii_if.dev = dev; - lp->mii_if.mdio_read = mdio_read; - lp->mii_if.mdio_write = mdio_write; - lp->mii_if.phy_id = lp->phy_addr; + lp->mii_if.mdio_read = korina_mdio_read; + lp->mii_if.mdio_write = korina_mdio_write; + lp->mii_if.phy_id = 1; lp->mii_if.phy_id_mask = 0x1f; lp->mii_if.reg_num_mask = 0x1f;
Fixed MDIO functions to work reliable and not just by accident. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> --- drivers/net/ethernet/korina.c | 57 +++++++++++++++++++++++------------ 1 file changed, 38 insertions(+), 19 deletions(-)