| Message ID | 20210412093451.14198-12-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kieran Bingham |
| Headers | show |
| Series | media: gmsl: Reliability improvements | expand |
Hi Jacopo, Thank you for the patch. On Mon, Apr 12, 2021 at 11:34:45AM +0200, Jacopo Mondi wrote: > Enable the noise immunity threshold at the end of the rdacm20 > initialization routine. > > The rdacm20 camera module has been so far tested with a startup > delay that allowed the embedded MCU to program the serializer. If > the initialization routine is run before the MCU programs the > serializer and the image sensor and their addresses gets changed > by the rdacm20 driver it is required to manually enable the noise > immunity threshold to make the communication on the control channel > more reliable. > > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/media/i2c/rdacm20.c | 14 +++++++++++++- > 1 file changed, 13 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c > index c1a717153303..5e0314a2b1ca 100644 > --- a/drivers/media/i2c/rdacm20.c > +++ b/drivers/media/i2c/rdacm20.c > @@ -539,7 +539,19 @@ static int rdacm20_initialize(struct rdacm20_device *dev) > > dev_info(dev->dev, "Identified MAX9271 + OV10635 device\n"); > > - return 0; > + /* > + * Set reverse channel high threshold to increase noise immunity. > + * > + * This should be compensated by increasing the reverse channel > + * amplitude on the remote deserializer side. > + * > + * TODO Inspect the embedded MCU programming sequence to make sure > + * there are no conflicts with the configuration applied here. > + * > + * TODO Clarify the embedded MCU startup delay to avoid write > + * collisions on the I2C bus. > + */ > + return max9271_set_high_threshold(&dev->serializer, true); > } > > static int rdacm20_probe(struct i2c_client *client)
diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c index c1a717153303..5e0314a2b1ca 100644 --- a/drivers/media/i2c/rdacm20.c +++ b/drivers/media/i2c/rdacm20.c @@ -539,7 +539,19 @@ static int rdacm20_initialize(struct rdacm20_device *dev) dev_info(dev->dev, "Identified MAX9271 + OV10635 device\n"); - return 0; + /* + * Set reverse channel high threshold to increase noise immunity. + * + * This should be compensated by increasing the reverse channel + * amplitude on the remote deserializer side. + * + * TODO Inspect the embedded MCU programming sequence to make sure + * there are no conflicts with the configuration applied here. + * + * TODO Clarify the embedded MCU startup delay to avoid write + * collisions on the I2C bus. + */ + return max9271_set_high_threshold(&dev->serializer, true); } static int rdacm20_probe(struct i2c_client *client)