| Message ID | 20210407020451.924822-7-kashyap.desai@broadcom.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Introducing mpi3mr driver | expand |
On 4/7/21 4:04 AM, Kashyap Desai wrote: > Firmware can report various MPI Events. > Support for certain Events (as listed below) are enabled in the driver > and their processing in driver is covered in this patch. > > MPI3_EVENT_DEVICE_ADDED > MPI3_EVENT_DEVICE_INFO_CHANGED > MPI3_EVENT_DEVICE_STATUS_CHANGE > MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE > MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST > MPI3_EVENT_SAS_DISCOVERY > MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR > > Key support in this patch is device add/removal. > > Fix some compilation warning reported by kernel test robot. > > Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> > Reported-by: kernel test robot <lkp@intel.com> > Cc: sathya.prakash@broadcom.com > --- > drivers/scsi/mpi3mr/mpi/mpi30_api.h | 2 + > drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h | 2721 ++++++++++++++++++++++++++ > drivers/scsi/mpi3mr/mpi/mpi30_sas.h | 46 + > drivers/scsi/mpi3mr/mpi3mr.h | 202 ++++ > drivers/scsi/mpi3mr/mpi3mr_fw.c | 194 +++- > drivers/scsi/mpi3mr/mpi3mr_os.c | 1455 ++++++++++++++++++++++++++- > 6 files changed, 4574 insertions(+), 2 deletions(-) > create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h > create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_sas.h > > diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h > index 46dd30ccb5f9..40409e22b268 100644 > --- a/drivers/scsi/mpi3mr/mpi/mpi30_api.h > +++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h > @@ -14,8 +14,10 @@ > > #include "mpi30_type.h" > #include "mpi30_transport.h" > +#include "mpi30_cnfg.h" > #include "mpi30_image.h" > #include "mpi30_init.h" > #include "mpi30_ioc.h" > +#include "mpi30_sas.h" > > #endif /* MPI30_API_H */ > diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h > new file mode 100644 > index 000000000000..3badb1bb85b1 > --- /dev/null > +++ b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h > @@ -0,0 +1,2721 @@ > +/* > + * Copyright 2017-2020 Broadcom Inc. All rights reserved. > + * > + * Name: mpi30_cnfg.h > + * Description: Contains definitions for Configuration messages and pages > + * Creation Date: 03/15/2017 > + * Version: 03.00.00 > + */ > +#ifndef MPI30_CNFG_H > +#define MPI30_CNFG_H 1 > + > +/***************************************************************************** > + * Configuration Page Types * > + ****************************************************************************/ > +#define MPI3_CONFIG_PAGETYPE_IO_UNIT (0x00) > +#define MPI3_CONFIG_PAGETYPE_MANUFACTURING (0x01) > +#define MPI3_CONFIG_PAGETYPE_IOC (0x02) > +#define MPI3_CONFIG_PAGETYPE_UEFI_BSD (0x03) > +#define MPI3_CONFIG_PAGETYPE_SECURITY (0x04) > +#define MPI3_CONFIG_PAGETYPE_ENCLOSURE (0x11) > +#define MPI3_CONFIG_PAGETYPE_DEVICE (0x12) > +#define MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT (0x20) > +#define MPI3_CONFIG_PAGETYPE_SAS_EXPANDER (0x21) > +#define MPI3_CONFIG_PAGETYPE_SAS_PHY (0x23) > +#define MPI3_CONFIG_PAGETYPE_SAS_PORT (0x24) > +#define MPI3_CONFIG_PAGETYPE_PCIE_IO_UNIT (0x30) > +#define MPI3_CONFIG_PAGETYPE_PCIE_SWITCH (0x31) > +#define MPI3_CONFIG_PAGETYPE_PCIE_LINK (0x33) > + > +/***************************************************************************** > + * Configuration Page Attributes * > + ****************************************************************************/ > +#define MPI3_CONFIG_PAGEATTR_MASK (0xF0) > +#define MPI3_CONFIG_PAGEATTR_READ_ONLY (0x00) > +#define MPI3_CONFIG_PAGEATTR_CHANGEABLE (0x10) > +#define MPI3_CONFIG_PAGEATTR_PERSISTENT (0x20) > + > +/***************************************************************************** > + * Configuration Page Actions * > + ****************************************************************************/ > +#define MPI3_CONFIG_ACTION_PAGE_HEADER (0x00) > +#define MPI3_CONFIG_ACTION_READ_DEFAULT (0x01) > +#define MPI3_CONFIG_ACTION_READ_CURRENT (0x02) > +#define MPI3_CONFIG_ACTION_WRITE_CURRENT (0x03) > +#define MPI3_CONFIG_ACTION_READ_PERSISTENT (0x04) > +#define MPI3_CONFIG_ACTION_WRITE_PERSISTENT (0x05) > + > +/***************************************************************************** > + * Configuration Page Addressing * > + ****************************************************************************/ > + > +/**** Device PageAddress Format ****/ > +#define MPI3_DEVICE_PGAD_FORM_MASK (0xF0000000) > +#define MPI3_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) > +#define MPI3_DEVICE_PGAD_FORM_HANDLE (0x20000000) > +#define MPI3_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) > + > +/**** SAS Expander PageAddress Format ****/ > +#define MPI3_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) > +#define MPI3_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) > +#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM (0x10000000) > +#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE (0x20000000) > +#define MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) > +#define MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) > +#define MPI3_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) > + > +/**** SAS Phy PageAddress Format ****/ > +#define MPI3_SAS_PHY_PGAD_FORM_MASK (0xF0000000) > +#define MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) > +#define MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) > + > +/**** SAS Port PageAddress Format ****/ > +#define MPI3_SASPORT_PGAD_FORM_MASK (0xF0000000) > +#define MPI3_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) > +#define MPI3_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) > +#define MPI3_SASPORT_PGAD_PORT_NUMBER_MASK (0x000000FF) > + > +/**** Enclosure PageAddress Format ****/ > +#define MPI3_ENCLOS_PGAD_FORM_MASK (0xF0000000) > +#define MPI3_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) > +#define MPI3_ENCLOS_PGAD_FORM_HANDLE (0x10000000) > +#define MPI3_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) > + > +/**** PCIe Switch PageAddress Format ****/ > +#define MPI3_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000) > +#define MPI3_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) > +#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE_PORT_NUM (0x10000000) > +#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE (0x20000000) > +#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000) > +#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16) > +#define MPI3_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF) > + > +/**** PCIe Link PageAddress Format ****/ > +#define MPI3_PCIE_LINK_PGAD_FORM_MASK (0xF0000000) > +#define MPI3_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000) > +#define MPI3_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000) > +#define MPI3_PCIE_LINK_PGAD_LINKNUM_MASK (0x000000FF) > + > +/**** Security PageAddress Format ****/ > +#define MPI3_SECURITY_PGAD_FORM_MASK (0xF0000000) > +#define MPI3_SECURITY_PGAD_FORM_GET_NEXT_SLOT (0x00000000) > +#define MPI3_SECURITY_PGAD_FORM_SOT_NUM (0x10000000) > +#define MPI3_SECURITY_PGAD_SLOT_GROUP_MASK (0x0000FF00) > +#define MPI3_SECURITY_PGAD_SLOT_MASK (0x000000FF) > + > +/***************************************************************************** > + * Configuration Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_CONFIG_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U8 PageVersion; /* 0x0C */ > + U8 PageNumber; /* 0x0D */ > + U8 PageType; /* 0x0E */ > + U8 Action; /* 0x0F */ > + U32 PageAddress; /* 0x10 */ > + U16 PageLength; /* 0x14 */ > + U16 Reserved16; /* 0x16 */ > + U32 Reserved18[2]; /* 0x18 */ > + MPI3_SGE_UNION SGL; /* 0x20 */ > +} MPI3_CONFIG_REQUEST, MPI3_POINTER PTR_MPI3_CONFIG_REQUEST, > + Mpi3ConfigRequest_t, MPI3_POINTER pMpi3ConfigRequest_t; > + > +/***************************************************************************** > + * Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * Configuration Page Header * > + ****************************************************************************/ > +typedef struct _MPI3_CONFIG_PAGE_HEADER { > + U8 PageVersion; /* 0x00 */ > + U8 Reserved01; /* 0x01 */ > + U8 PageNumber; /* 0x02 */ > + U8 PageAttribute; /* 0x03 */ > + U16 PageLength; /* 0x04 */ > + U8 PageType; /* 0x06 */ > + U8 Reserved07; /* 0x07 */ > +} MPI3_CONFIG_PAGE_HEADER, MPI3_POINTER PTR_MPI3_CONFIG_PAGE_HEADER, > + Mpi3ConfigPageHeader_t, MPI3_POINTER pMpi3ConfigPageHeader_t; > + > +/***************************************************************************** > + * Common definitions used by Configuration Pages * > + ****************************************************************************/ > + > +/**** Defines for Negotiated Link Rates ****/ > +#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK (0xF0) > +#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT (4) > +#define MPI3_SAS_NEG_LINK_RATE_PHYSICAL_MASK (0x0F) > +#define MPI3_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) > +#define MPI3_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) > +#define MPI3_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) > +#define MPI3_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) > +#define MPI3_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) > +#define MPI3_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) > +#define MPI3_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) > +#define MPI3_SAS_NEG_LINK_RATE_1_5 (0x08) > +#define MPI3_SAS_NEG_LINK_RATE_3_0 (0x09) > +#define MPI3_SAS_NEG_LINK_RATE_6_0 (0x0A) > +#define MPI3_SAS_NEG_LINK_RATE_12_0 (0x0B) > +#define MPI3_SAS_NEG_LINK_RATE_22_5 (0x0C) > + > +/**** Defines for the AttachedPhyInfo field ****/ > +#define MPI3_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) > +#define MPI3_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) > +#define MPI3_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) > + > +#define MPI3_SAS_APHYINFO_REASON_MASK (0x0000000F) > +#define MPI3_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) > +#define MPI3_SAS_APHYINFO_REASON_POWER_ON (0x00000001) > +#define MPI3_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) > +#define MPI3_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) > +#define MPI3_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) > +#define MPI3_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) > +#define MPI3_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) > +#define MPI3_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) > +#define MPI3_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) > +#define MPI3_SAS_APHYINFO_REASON_EXP_REDUCED_FUNC (0x00000009) > + > +/**** Defines for the PhyInfo field ****/ > +#define MPI3_SAS_PHYINFO_STATUS_MASK (0xC0000000) > +#define MPI3_SAS_PHYINFO_STATUS_SHIFT (30) > +#define MPI3_SAS_PHYINFO_STATUS_ACCESSIBLE (0x00000000) > +#define MPI3_SAS_PHYINFO_STATUS_NOT_EXIST (0x40000000) > +#define MPI3_SAS_PHYINFO_STATUS_VACANT (0x80000000) > + > +#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) > +#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_ACTIVE (0x00000000) > +#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_PARTIAL (0x08000000) > +#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_SLUMBER (0x10000000) > + > +#define MPI3_SAS_PHYINFO_REASON_MASK (0x000F0000) > +#define MPI3_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) > +#define MPI3_SAS_PHYINFO_REASON_POWER_ON (0x00010000) > +#define MPI3_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) > +#define MPI3_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) > +#define MPI3_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) > +#define MPI3_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) > +#define MPI3_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) > +#define MPI3_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) > +#define MPI3_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) > +#define MPI3_SAS_PHYINFO_REASON_EXP_REDUCED_FUNC (0x00090000) > + > +#define MPI3_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) > +#define MPI3_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) > +#define MPI3_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) > + > +#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_MASK (0x00000F00) > +#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_SHIFT (8) > + > +#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_MASK (0x000000F0) > +#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_DIRECT (0x00000000) > +#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_SUBTRACTIVE (0x00000010) > +#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_TABLE (0x00000020) > + > +/**** Defines for the ProgrammedLinkRate field ****/ > +#define MPI3_SAS_PRATE_MAX_RATE_MASK (0xF0) > +#define MPI3_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) > +#define MPI3_SAS_PRATE_MAX_RATE_1_5 (0x80) > +#define MPI3_SAS_PRATE_MAX_RATE_3_0 (0x90) > +#define MPI3_SAS_PRATE_MAX_RATE_6_0 (0xA0) > +#define MPI3_SAS_PRATE_MAX_RATE_12_0 (0xB0) > +#define MPI3_SAS_PRATE_MAX_RATE_22_5 (0xC0) > +#define MPI3_SAS_PRATE_MIN_RATE_MASK (0x0F) > +#define MPI3_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) > +#define MPI3_SAS_PRATE_MIN_RATE_1_5 (0x08) > +#define MPI3_SAS_PRATE_MIN_RATE_3_0 (0x09) > +#define MPI3_SAS_PRATE_MIN_RATE_6_0 (0x0A) > +#define MPI3_SAS_PRATE_MIN_RATE_12_0 (0x0B) > +#define MPI3_SAS_PRATE_MIN_RATE_22_5 (0x0C) > + > +/**** Defines for the HwLinkRate field ****/ > +#define MPI3_SAS_HWRATE_MAX_RATE_MASK (0xF0) > +#define MPI3_SAS_HWRATE_MAX_RATE_1_5 (0x80) > +#define MPI3_SAS_HWRATE_MAX_RATE_3_0 (0x90) > +#define MPI3_SAS_HWRATE_MAX_RATE_6_0 (0xA0) > +#define MPI3_SAS_HWRATE_MAX_RATE_12_0 (0xB0) > +#define MPI3_SAS_HWRATE_MAX_RATE_22_5 (0xC0) > +#define MPI3_SAS_HWRATE_MIN_RATE_MASK (0x0F) > +#define MPI3_SAS_HWRATE_MIN_RATE_1_5 (0x08) > +#define MPI3_SAS_HWRATE_MIN_RATE_3_0 (0x09) > +#define MPI3_SAS_HWRATE_MIN_RATE_6_0 (0x0A) > +#define MPI3_SAS_HWRATE_MIN_RATE_12_0 (0x0B) > +#define MPI3_SAS_HWRATE_MIN_RATE_22_5 (0x0C) > + > +/**** Defines for the Slot field ****/ > +#define MPI3_SLOT_INVALID (0xFFFF) > + > +/**** Defines for the SlotIndex field ****/ > +#define MPI3_SLOT_INDEX_INVALID (0xFFFF) > + > +/***************************************************************************** > + * Manufacturing Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * Manufacturing Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_MAN_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 ChipRevision[8]; /* 0x08 */ > + U8 ChipName[32]; /* 0x10 */ > + U8 BoardName[32]; /* 0x30 */ > + U8 BoardAssembly[32]; /* 0x50 */ > + U8 BoardTracerNumber[32]; /* 0x70 */ > + U32 BoardPower; /* 0x90 */ > + U32 Reserved94; /* 0x94 */ > + U32 Reserved98; /* 0x98 */ > + U8 OEM; /* 0x9C */ > + U8 SubOEM; /* 0x9D */ > + U16 Reserved9E; /* 0x9E */ > + U8 BoardMfgDay; /* 0xA0 */ > + U8 BoardMfgMonth; /* 0xA1 */ > + U16 BoardMfgYear; /* 0xA2 */ > + U8 BoardReworkDay; /* 0xA4 */ > + U8 BoardReworkMonth; /* 0xA5 */ > + U16 BoardReworkYear; /* 0xA6 */ > + U64 BoardRevision; /* 0xA8 */ > + U8 EPackFRU[16]; /* 0xB0 */ > + U8 ProductName[256]; /* 0xC0 */ > +} MPI3_MAN_PAGE0, MPI3_POINTER PTR_MPI3_MAN_PAGE0, > + Mpi3ManPage0_t, MPI3_POINTER pMpi3ManPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN0_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 1 * > + ****************************************************************************/ > + > +#define MPI3_MAN1_VPD_SIZE (512) > + > +typedef struct _MPI3_MAN_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08[2]; /* 0x08 */ > + U8 VPD[MPI3_MAN1_VPD_SIZE]; /* 0x10 */ > +} MPI3_MAN_PAGE1, MPI3_POINTER PTR_MPI3_MAN_PAGE1, > + Mpi3ManPage1_t, MPI3_POINTER pMpi3ManPage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN1_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 5 * > + ****************************************************************************/ > +typedef struct _MPI3_MAN5_PHY_ENTRY { > + U64 IOC_WWID; /* 0x00 */ > + U64 DeviceName; /* 0x08 */ > + U64 SATA_WWID; /* 0x10 */ > +} MPI3_MAN5_PHY_ENTRY, MPI3_POINTER PTR_MPI3_MAN5_PHY_ENTRY, > + Mpi3Man5PhyEntry_t, MPI3_POINTER pMpi3Man5PhyEntry_t; > + > +#ifndef MPI3_MAN5_PHY_MAX > +#define MPI3_MAN5_PHY_MAX (1) > +#endif /* MPI3_MAN5_PHY_MAX */ > + > +typedef struct _MPI3_MAN_PAGE5 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 NumPhys; /* 0x08 */ > + U8 Reserved09[3]; /* 0x09 */ > + U32 Reserved0C; /* 0x0C */ > + MPI3_MAN5_PHY_ENTRY Phy[MPI3_MAN5_PHY_MAX]; /* 0x10 */ > +} MPI3_MAN_PAGE5, MPI3_POINTER PTR_MPI3_MAN_PAGE5, > + Mpi3ManPage5_t, MPI3_POINTER pMpi3ManPage5_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN5_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 6 * > + ****************************************************************************/ > +typedef struct _MPI3_MAN6_GPIO_ENTRY { > + U8 FunctionCode; /* 0x00 */ > + U8 Reserved01; /* 0x01 */ > + U16 Flags; /* 0x02 */ > + U8 Param1; /* 0x04 */ > + U8 Param2; /* 0x05 */ > + U16 Reserved06; /* 0x06 */ > + U32 Param3; /* 0x08 */ > +} MPI3_MAN6_GPIO_ENTRY, MPI3_POINTER PTR_MPI3_MAN6_GPIO_ENTRY, > + Mpi3Man6GpioEntry_t, MPI3_POINTER pMpi3Man6GpioEntry_t; > + > +/**** Defines for the FunctionCode field ****/ > +#define MPI3_MAN6_GPIO_FUNCTION_GENERIC (0x00) > +#define MPI3_MAN6_GPIO_FUNCTION_ALTERNATE (0x01) > +#define MPI3_MAN6_GPIO_FUNCTION_EXT_INTERRUPT (0x02) > +#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_ACTIVITY (0x03) > +#define MPI3_MAN6_GPIO_FUNCTION_OVER_TEMPERATURE (0x04) > +#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_GREEN (0x05) > +#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_YELLOW (0x06) > +#define MPI3_MAN6_GPIO_FUNCTION_CABLE_MANAGEMENT (0x07) > +#define MPI3_MAN6_GPIO_FUNCTION_BKPLANE_MGMT_TYPE (0x08) > +#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_MUX_RESET (0x09) > +#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_RESET (0x0A) > +#define MPI3_MAN6_GPIO_FUNCTION_BACKEND_PCIE_RESET (0x0B) > +#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_FAULT (0x0C) > +#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ATTN (0x0D) > +#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ONLINE (0x0E) > +#define MPI3_MAN6_GPIO_FUNCTION_EPACK_FAULT (0x0F) > +#define MPI3_MAN6_GPIO_FUNCTION_CTRL_TYPE (0x10) > +#define MPI3_MAN6_GPIO_FUNCTION_LICENSE (0x11) > +#define MPI3_MAN6_GPIO_FUNCTION_REFCLK_CONTROL (0x12) > + > +/**** Defines for Param1 (Flags) when FunctionCode is EXT_INTERRUPT ****/ > +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_MASK (0xF0) > +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_GENERIC (0x00) > +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_CABLE_MGMT (0x10) > +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_ACTIVE_CABLE_OVERCURRENT (0x20) > + > +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_MASK (0x01) > +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_EDGE (0x00) > +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_LEVEL (0x01) > + > +/**** Defines for Param1 (PHY STATE) when FunctionCode is PORT_STATUS_GREEN ****/ > +#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ALL_UP (0x00) > +#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ONE_OR_MORE_UP (0x01) > + > +/**** Defines for Param1 (INTERFACE_SIGNAL) when FunctionCode is CABLE_MANAGEMENT ****/ > +#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_MODULE_PRESENT (0x00) > +#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_ACTIVE_CABLE_ENABLE (0x01) > +#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_CABLE_MGMT_ENABLE (0x02) > + > +/**** Defines for Param2 (ISTWI RESET) when FunctionCode is ISTWI_MUX_RESET ****/ > +#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_SPEC_MUX (0x00) > +#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_ALL_MUXES (0x01) > + > +/**** Defines for Param1 (LECENSE_TYPE) when FunctionCode is LICENSE ****/ > +#define MPI3_MAN6_GPIO_LICENSE_PARAM1_TYPE_IBUTTON (0x00) > + > + > +/**** Defines for the Flags field ****/ > +#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_MASK (0x0100) > +#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_FAST_EDGE (0x0100) > +#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_SLOW_EDGE (0x0000) > +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_MASK (0x00C0) > +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_100OHM (0x0000) > +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_66OHM (0x0040) > +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_50OHM (0x0080) > +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_33OHM (0x00C0) > +#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_MASK (0x0030) > +#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_SHIFT (4) > +#define MPI3_MAN6_GPIO_FLAGS_ACTIVE_HIGH (0x0008) > +#define MPI3_MAN6_GPIO_FLAGS_BI_DIR_ENABLED (0x0004) > +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_MASK (0x0003) > +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_INPUT (0x0000) > +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_DRAIN_OUTPUT (0x0001) > +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_SOURCE_OUTPUT (0x0002) > +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_PUSH_PULL_OUTPUT (0x0003) > + > +#ifndef MPI3_MAN6_GPIO_MAX > +#define MPI3_MAN6_GPIO_MAX (1) > +#endif /* MPI3_MAN6_GPIO_MAX */ > + > +typedef struct _MPI3_MAN_PAGE6 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U16 Flags; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U8 NumGPIO; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_MAN6_GPIO_ENTRY GPIO[MPI3_MAN6_GPIO_MAX]; /* 0x10 */ > +} MPI3_MAN_PAGE6, MPI3_POINTER PTR_MPI3_MAN_PAGE6, > + Mpi3ManPage6_t, MPI3_POINTER pMpi3ManPage6_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN6_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_MAN6_FLAGS_HEARTBEAT_LED_DISABLED (0x0001) > + > +/***************************************************************************** > + * Manufacturing Page 7 * > + ****************************************************************************/ > +typedef struct _MPI3_MAN7_RECEPTACLE_INFO { > + U32 Name[4]; /* 0x00 */ > + U8 Location; /* 0x10 */ > + U8 ConnectorType; /* 0x11 */ > + U8 PEDClk; /* 0x12 */ > + U8 ConnectorID; /* 0x13 */ > + U32 Reserved14; /* 0x14 */ > +} MPI3_MAN7_RECEPTACLE_INFO, MPI3_POINTER PTR_MPI3_MAN7_RECEPTACLE_INFO, > + Mpi3Man7ReceptacleInfo_t, MPI3_POINTER pMpi3Man7ReceptacleInfo_t; > + > +/**** Defines for Location field ****/ > +#define MPI3_MAN7_LOCATION_UNKNOWN (0x00) > +#define MPI3_MAN7_LOCATION_INTERNAL (0x01) > +#define MPI3_MAN7_LOCATION_EXTERNAL (0x02) > +#define MPI3_MAN7_LOCATION_VIRTUAL (0x03) > + > +/**** Defines for ConnectorType - Use definitions from SES-4 ****/ > + > +/**** Defines for PEDClk field ****/ > +#define MPI3_MAN7_PEDCLK_ROUTING_MASK (0x10) > +#define MPI3_MAN7_PEDCLK_ROUTING_DIRECT (0x00) > +#define MPI3_MAN7_PEDCLK_ROUTING_CLOCK_BUFFER (0x10) > +#define MPI3_MAN7_PEDCLK_ID_MASK (0x0F) > + > +#ifndef MPI3_MAN7_RECEPTACLE_INFO_MAX > +#define MPI3_MAN7_RECEPTACLE_INFO_MAX (1) > +#endif /* MPI3_MAN7_RECEPTACLE_INFO_MAX */ > + > +typedef struct _MPI3_MAN_PAGE7 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Flags; /* 0x08 */ > + U8 NumReceptacles; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + U32 EnclosureName[4]; /* 0x10 */ > + MPI3_MAN7_RECEPTACLE_INFO ReceptacleInfo[MPI3_MAN7_RECEPTACLE_INFO_MAX]; /* 0x20 */ /* variable length array */ > +} MPI3_MAN_PAGE7, MPI3_POINTER PTR_MPI3_MAN_PAGE7, > + Mpi3ManPage7_t, MPI3_POINTER pMpi3ManPage7_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN7_PAGEVERSION (0x00) > + > +/**** Defines for Flags field ****/ > +#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_MASK (0x01) > +#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_0 (0x00) > +#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_1 (0x01) > + > + > +/***************************************************************************** > + * Manufacturing Page 8 * > + ****************************************************************************/ > + > +typedef struct _MPI3_MAN8_PHY_INFO { > + U8 ReceptacleID; /* 0x00 */ > + U8 ConnectorLane; /* 0x01 */ > + U16 Reserved02; /* 0x02 */ > + U16 Slotx1; /* 0x04 */ > + U16 Slotx2; /* 0x06 */ > + U16 Slotx4; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U32 Reserved0C; /* 0x0C */ > +} MPI3_MAN8_PHY_INFO, MPI3_POINTER PTR_MPI3_MAN8_PHY_INFO, > + Mpi3Man8PhyInfo_t, MPI3_POINTER pMpi3Man8PhyInfo_t; > + > +#ifndef MPI3_MAN8_PHY_INFO_MAX > +#define MPI3_MAN8_PHY_INFO_MAX (1) > +#endif /* MPI3_MAN8_PHY_INFO_MAX */ > + > +typedef struct _MPI3_MAN_PAGE8 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumPhys; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_MAN8_PHY_INFO PhyInfo[MPI3_MAN8_PHY_INFO_MAX]; /* 0x10 */ /* variable length array */ > +} MPI3_MAN_PAGE8, MPI3_POINTER PTR_MPI3_MAN_PAGE8, > + Mpi3ManPage8_t, MPI3_POINTER pMpi3ManPage8_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN8_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 9 * > + ****************************************************************************/ > +typedef struct _MPI3_MAN9_RSRC_ENTRY { > + U32 Maximum; /* 0x00 */ > + U32 Decrement; /* 0x04 */ > + U32 Minimum; /* 0x08 */ > + U32 Actual; /* 0x0C */ > +} MPI3_MAN9_RSRC_ENTRY, MPI3_POINTER PTR_MPI3_MAN9_RSRC_ENTRY, > + Mpi3Man9RsrcEntry_t, MPI3_POINTER pMpi3Man9RsrcEntry_t; > + > +typedef enum _MPI3_MAN9_RESOURCES { > + MPI3_MAN9_RSRC_OUTSTANDING_REQS = 0, > + MPI3_MAN9_RSRC_TARGET_CMDS = 1, > + MPI3_MAN9_RSRC_SAS_TARGETS = 2, > + MPI3_MAN9_RSRC_PCIE_TARGETS = 3, > + MPI3_MAN9_RSRC_INITIATORS = 4, > + MPI3_MAN9_RSRC_VDS = 5, > + MPI3_MAN9_RSRC_ENCLOSURES = 6, > + MPI3_MAN9_RSRC_ENCLOSURE_PHYS = 7, > + MPI3_MAN9_RSRC_EXPANDERS = 8, > + MPI3_MAN9_RSRC_PCIE_SWITCHES = 9, > + MPI3_MAN9_RSRC_PDS = 10, > + MPI3_MAN9_RSRC_HOST_PDS = 11, > + MPI3_MAN9_RSRC_ADV_HOST_PDS = 12, > + MPI3_MAN9_RSRC_RAID_PDS = 13, > + MPI3_MAN9_RSRC_NUM_RESOURCES > +} MPI3_MAN9_RESOURCES; > + > +#define MPI3_MAN9_MIN_OUTSTANDING_REQS (1) > +#define MPI3_MAN9_MAX_OUTSTANDING_REQS (65000) > + > +#define MPI3_MAN9_MIN_TARGET_CMDS (0) > +#define MPI3_MAN9_MAX_TARGET_CMDS (65535) > + > +#define MPI3_MAN9_MIN_SAS_TARGETS (0) > +#define MPI3_MAN9_MAX_SAS_TARGETS (65535) > + > +#define MPI3_MAN9_MIN_PCIE_TARGETS (0) > +/* Max PCIe Targets is product specific */ > + > +#define MPI3_MAN9_MIN_INITIATORS (0) > +#define MPI3_MAN9_MAX_INITIATORS (65535) > + > +#define MPI3_MAN9_MIN_ENCLOSURES (0) > +#define MPI3_MAN9_MAX_ENCLOSURES (65535) > + > +#define MPI3_MAN9_MIN_ENCLOSURE_PHYS (0) > +/* > + * Max Enclosure Phys depends on the largest enclosure > + * i.e. the enclosure with the largest number of phys. > + */ > + > +#define MPI3_MAN9_MIN_EXPANDERS (0) > +#define MPI3_MAN9_MAX_EXPANDERS (65535) > + > +#define MPI3_MAN9_MIN_PCIE_SWITCHES (0) > +/* Max PCIe Switches is product specific */ > + > +typedef struct _MPI3_MAN_PAGE9 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 NumResources; /* 0x08 */ > + U8 Reserved09; /* 0x09 */ > + U16 Reserved0A; /* 0x0A */ > + U32 Reserved0C; /* 0x0C */ > + U32 Reserved10; /* 0x10 */ > + U32 Reserved14; /* 0x14 */ > + U32 Reserved18; /* 0x18 */ > + U32 Reserved1C; /* 0x1C */ > + MPI3_MAN9_RSRC_ENTRY Resource[MPI3_MAN9_RSRC_NUM_RESOURCES]; /* 0x20 */ > +} MPI3_MAN_PAGE9, MPI3_POINTER PTR_MPI3_MAN_PAGE9, > + Mpi3ManPage9_t, MPI3_POINTER pMpi3ManPage9_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN9_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 10 * > + ****************************************************************************/ > +typedef struct _MPI3_MAN10_ISTWI_CTRLR_ENTRY { > + U16 SlaveAddress; /* 0x00 */ > + U16 Flags; /* 0x02 */ > + U32 Reserved04; /* 0x04 */ > +} MPI3_MAN10_ISTWI_CTRLR_ENTRY, MPI3_POINTER PTR_MPI3_MAN10_ISTWI_CTRLR_ENTRY, > + Mpi3Man10IstwiCtrlrEntry_t, MPI3_POINTER pMpi3Man10IstwiCtrlrEntry_t; > + > +/**** Defines for the Flags field ****/ > +#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_SLAVE_ENABLED (0x0002) > +#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_MASTER_ENABLED (0x0001) > + > +#ifndef MPI3_MAN10_ISTWI_CTRLR_MAX > +#define MPI3_MAN10_ISTWI_CTRLR_MAX (1) > +#endif /* MPI3_MAN10_ISTWI_CTRLR_MAX */ > + > +typedef struct _MPI3_MAN_PAGE10 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumISTWICtrl; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_MAN10_ISTWI_CTRLR_ENTRY ISTWIController[MPI3_MAN10_ISTWI_CTRLR_MAX]; /* 0x10 */ > +} MPI3_MAN_PAGE10, MPI3_POINTER PTR_MPI3_MAN_PAGE10, > + Mpi3ManPage10_t, MPI3_POINTER pMpi3ManPage10_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN10_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 11 * > + ****************************************************************************/ > +typedef struct _MPI3_MAN11_MUX_DEVICE_FORMAT { > + U8 MaxChannel; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U32 Reserved04; /* 0x04 */ > +} MPI3_MAN11_MUX_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_MUX_DEVICE_FORMAT, > + Mpi3Man11MuxDeviceFormat_t, MPI3_POINTER pMpi3Man11MuxDeviceFormat_t; > + > +typedef struct _MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT { > + U8 Type; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U8 TempChannel[4]; /* 0x04 */ > +} MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT, > + Mpi3Man11TempSensorDeviceFormat_t, MPI3_POINTER pMpi3Man11TempSensorDeviceFormat_t; > + > +/**** Defines for the Type field ****/ > +#define MPI3_MAN11_TEMP_SENSOR_TYPE_MAX6654 (0x00) > +#define MPI3_MAN11_TEMP_SENSOR_TYPE_EMC1442 (0x01) > +#define MPI3_MAN11_TEMP_SENSOR_TYPE_ADT7476 (0x02) > + > +/**** Define for the TempChannel field ****/ > +#define MPI3_MAN11_TEMP_SENSOR_CHANNEL_ENABLED (0x01) > + > +typedef struct _MPI3_MAN11_SEEPROM_DEVICE_FORMAT { > + U8 Size; /* 0x00 */ > + U8 PageWriteSize; /* 0x01 */ > + U16 Reserved02; /* 0x02 */ > + U32 Reserved04; /* 0x04 */ > +} MPI3_MAN11_SEEPROM_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_SEEPROM_DEVICE_FORMAT, > + Mpi3Man11SeepromDeviceFormat_t, MPI3_POINTER pMpi3Man11SeepromDeviceFormat_t; > + > +/**** Defines for the Size field ****/ > +#define MPI3_MAN11_SEEPROM_SIZE_1KBITS (0x01) > +#define MPI3_MAN11_SEEPROM_SIZE_2KBITS (0x02) > +#define MPI3_MAN11_SEEPROM_SIZE_4KBITS (0x03) > +#define MPI3_MAN11_SEEPROM_SIZE_8KBITS (0x04) > +#define MPI3_MAN11_SEEPROM_SIZE_16KBITS (0x05) > +#define MPI3_MAN11_SEEPROM_SIZE_32KBITS (0x06) > +#define MPI3_MAN11_SEEPROM_SIZE_64KBITS (0x07) > +#define MPI3_MAN11_SEEPROM_SIZE_128KBITS (0x08) > + > +typedef struct _MPI3_MAN11_DDR_SPD_DEVICE_FORMAT { > + U8 Channel; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U32 Reserved04; /* 0x04 */ > +} MPI3_MAN11_DDR_SPD_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_DDR_SPD_DEVICE_FORMAT, > + Mpi3Man11DdrSpdDeviceFormat_t, MPI3_POINTER pMpi3Man11DdrSpdDeviceFormat_t; > + > +typedef struct _MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT { > + U8 Type; /* 0x00 */ > + U8 ReceptacleID; /* 0x01 */ > + U16 Reserved02; /* 0x02 */ > + U32 Reserved04; /* 0x04 */ > +} MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT, > + Mpi3Man11CableMgmtDeviceFormat_t, MPI3_POINTER pMpi3Man11CableMgmtDeviceFormat_t; > + > +/**** Defines for the Type field ****/ > +#define MPI3_MAN11_CABLE_MGMT_TYPE_SFF_8636 (0x00) > + > +typedef struct _MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT { > + U16 Flags; /* 0x00 */ > + U16 Reserved02; /* 0x02 */ > +} MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT, > + Mpi3Man11BkplaneSpecUBMFormat, MPI3_POINTER pMpi3Man11BkplaneSpecUBMFormat; > + > +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0200) > +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_FORCE_POLLING (0x0100) > +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_MASK (0x00F0) > +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_SHIFT (4) > +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_MASK (0x000F) > +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_SHIFT (0) > + > +typedef struct _MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT { > + U16 Flags; /* 0x00 */ > + U16 Reserved02; /* 0x02 */ > +} MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT, > + Mpi3Man11BkplaneSpecVPPFormat, MPI3_POINTER pMpi3Man11BkplaneSpecVPPFormat; > + > +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0040) > +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_MASK (0x0030) > +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_GPIO (0x0000) > +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_REG (0x0010) > +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_MASK (0x000F) > +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_SHIFT (0) > + > + > +typedef union _MPI3_MAN11_BKPLANE_SPEC_FORMAT { > + MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT Ubm; > + MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT Vpp; > +} MPI3_MAN11_BKPLANE_SPEC_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_SPEC_FORMAT, > + Mpi3Man11BkplaneSpecFormat, MPI3_POINTER pMpi3Man11BkplaneSpecFormat; > + > +typedef struct _MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT { > + U8 Type; /* 0x00 */ > + U8 ReceptacleID; /* 0x01 */ > + U16 Reserved02; /* 0x02 */ > + MPI3_MAN11_BKPLANE_SPEC_FORMAT BackplaneMgmtSpecific; /* 0x04 */ > +} MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT, > + Mpi3Man11BkplaneMgmtDeviceFormat_t, MPI3_POINTER pMpi3Man11BkplaneMgmtDeviceFormat_t; > + > +/**** Defines for the Type field ****/ > +#define MPI3_MAN11_BKPLANE_MGMT_TYPE_UBM (0x00) > +#define MPI3_MAN11_BKPLANE_MGMT_TYPE_VPP (0x01) > + > +typedef struct _MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT { > + U8 Type; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U32 Reserved04; /* 0x04 */ > +} MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT, > + Mpi3Man11GasGaugeDeviceFormat_t, MPI3_POINTER pMpi3Man11GasGaugeDeviceFormat_t; > + > +/**** Defines for the Type field ****/ > +#define MPI3_MAN11_GAS_GAUGE_TYPE_STANDARD (0x00) > + > +typedef union _MPI3_MAN11_DEVICE_SPECIFIC_FORMAT { > + MPI3_MAN11_MUX_DEVICE_FORMAT Mux; > + MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT TempSensor; > + MPI3_MAN11_SEEPROM_DEVICE_FORMAT Seeprom; > + MPI3_MAN11_DDR_SPD_DEVICE_FORMAT DdrSpd; > + MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT CableMgmt; > + MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT BkplaneMgmt; > + MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT GasGauge; > + U32 Words[2]; > +} MPI3_MAN11_DEVICE_SPECIFIC_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_DEVICE_SPECIFIC_FORMAT, > + Mpi3Man11DeviceSpecificFormat_t, MPI3_POINTER pMpi3Man11DeviceSpecificFormat_t; > + > +typedef struct _MPI3_MAN11_ISTWI_DEVICE_FORMAT { > + U8 DeviceType; /* 0x00 */ > + U8 Controller; /* 0x01 */ > + U8 Reserved02; /* 0x02 */ > + U8 Flags; /* 0x03 */ > + U16 DeviceAddress; /* 0x04 */ > + U8 MuxChannel; /* 0x06 */ > + U8 MuxIndex; /* 0x07 */ > + MPI3_MAN11_DEVICE_SPECIFIC_FORMAT DeviceSpecific; /* 0x08 */ > +} MPI3_MAN11_ISTWI_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_ISTWI_DEVICE_FORMAT, > + Mpi3Man11IstwiDeviceFormat_t, MPI3_POINTER pMpi3Man11IstwiDeviceFormat_t; > + > +/**** Defines for the DeviceType field ****/ > +#define MPI3_MAN11_ISTWI_DEVTYPE_MUX (0x00) > +#define MPI3_MAN11_ISTWI_DEVTYPE_TEMP_SENSOR (0x01) > +#define MPI3_MAN11_ISTWI_DEVTYPE_SEEPROM (0x02) > +#define MPI3_MAN11_ISTWI_DEVTYPE_DDR_SPD (0x03) > +#define MPI3_MAN11_ISTWI_DEVTYPE_CABLE_MGMT (0x04) > +#define MPI3_MAN11_ISTWI_DEVTYPE_BACKPLANE_MGMT (0x05) > +#define MPI3_MAN11_ISTWI_DEVTYPE_GAS_GAUGE (0x06) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_MAN11_ISTWI_FLAGS_MUX_PRESENT (0x01) > +#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_MASK (0x06) > +#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_100KHZ (0x00) > +#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_400KHZ (0x02) > + > +#ifndef MPI3_MAN11_ISTWI_DEVICE_MAX > +#define MPI3_MAN11_ISTWI_DEVICE_MAX (1) > +#endif /* MPI3_MAN11_ISTWI_DEVICE_MAX */ > + > +typedef struct _MPI3_MAN_PAGE11 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumISTWIDev; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_MAN11_ISTWI_DEVICE_FORMAT ISTWIDevice[MPI3_MAN11_ISTWI_DEVICE_MAX]; /* 0x10 */ > +} MPI3_MAN_PAGE11, MPI3_POINTER PTR_MPI3_MAN_PAGE11, > + Mpi3ManPage11_t, MPI3_POINTER pMpi3ManPage11_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN11_PAGEVERSION (0x00) > + > + > +/***************************************************************************** > + * Manufacturing Page 12 * > + ****************************************************************************/ > +#ifndef MPI3_MAN12_NUM_SGPIO_MAX > +#define MPI3_MAN12_NUM_SGPIO_MAX (1) > +#endif /* MPI3_MAN12_NUM_SGPIO_MAX */ > + > +typedef struct _MPI3_MAN12_SGPIO_INFO { > + U8 SlotCount; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U32 Reserved04; /* 0x04 */ > + U8 PhyOrder[32]; /* 0x08 */ > +} MPI3_MAN12_SGPIO_INFO, MPI3_POINTER PTR_MPI3_MAN12_SGPIO_INFO, > + Mpi3Man12SGPIOInfo, MPI3_POINTER pMpi3Man12SGPIOInfo; > + > +typedef struct _MPI3_MAN_PAGE12 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Flags; /* 0x08 */ > + U32 SClockFreq; /* 0x0C */ > + U32 ActivityModulation; /* 0x10 */ > + U8 NumSGPIO; /* 0x14 */ > + U8 Reserved15[3]; /* 0x15 */ > + U32 Reserved18; /* 0x18 */ > + U32 Reserved1C; /* 0x1C */ > + U32 Pattern[8]; /* 0x20 */ > + MPI3_MAN12_SGPIO_INFO SGPIOInfo[MPI3_MAN12_NUM_SGPIO_MAX]; /* 0x40 */ /* variable length */ > +} MPI3_MAN_PAGE12, MPI3_POINTER PTR_MPI3_MAN_PAGE12, > + Mpi3ManPage12_t, MPI3_POINTER pMpi3ManPage12_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN12_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_MAN12_FLAGS_ERROR_PRESENCE_ENABLED (0x0400) > +#define MPI3_MAN12_FLAGS_ACTIVITY_INVERT_ENABLED (0x0200) > +#define MPI3_MAN12_FLAGS_GROUP_ID_DISABLED (0x0100) > +#define MPI3_MAN12_FLAGS_SIO_CLK_FILTER_ENABLED (0x0004) > +#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_MASK (0x0002) > +#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_PUSH_PULL (0x0000) > +#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_OPEN_DRAIN (0x0002) > +#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_MASK (0x0001) > +#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_PUSH_PULL (0x0000) > +#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_OPEN_DRAIN (0x0001) > + > +/**** Defines for the SioClkFreq field ****/ > +#define MPI3_MAN12_SIO_CLK_FREQ_MIN (32) /* 32 Hz min SIO Clk Freq */ > +#define MPI3_MAN12_SIO_CLK_FREQ_MAX (100000) /* 100 KHz max SIO Clk Freq */ > + > +/**** Defines for the ActivityModulation field ****/ > +#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_MASK (0x0000F000) > +#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_SHIFT (12) > +#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_MASK (0x00000F00) > +#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_SHIFT (8) > +#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_MASK (0x000000F0) > +#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_SHIFT (4) > +#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_MASK (0x0000000F) > +#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_SHIFT (0) > + > +/*** Defines for the Pattern field ****/ > +#define MPI3_MAN12_PATTERN_RATE_MASK (0xE0000000) > +#define MPI3_MAN12_PATTERN_RATE_2_HZ (0x00000000) > +#define MPI3_MAN12_PATTERN_RATE_4_HZ (0x20000000) > +#define MPI3_MAN12_PATTERN_RATE_8_HZ (0x40000000) > +#define MPI3_MAN12_PATTERN_RATE_16_HZ (0x60000000) > +#define MPI3_MAN12_PATTERN_RATE_10_HZ (0x80000000) > +#define MPI3_MAN12_PATTERN_RATE_20_HZ (0xA0000000) > +#define MPI3_MAN12_PATTERN_RATE_40_HZ (0xC0000000) > +#define MPI3_MAN12_PATTERN_LENGTH_MASK (0x1F000000) > +#define MPI3_MAN12_PATTERN_LENGTH_SHIFT (24) > +#define MPI3_MAN12_PATTERN_BIT_PATTERN_MASK (0x00FFFFFF) > +#define MPI3_MAN12_PATTERN_BIT_PATTERN_SHIFT (0) > + > + > +/***************************************************************************** > + * Manufacturing Page 13 * > + ****************************************************************************/ > + > +#ifndef MPI3_MAN13_NUM_TRANSLATION_MAX > +#define MPI3_MAN13_NUM_TRANSLATION_MAX (1) > +#endif /* MPI3_MAN13_NUM_TRANSLATION_MAX */ > + > +typedef struct _MPI3_MAN13_TRANSLATION_INFO { > + U32 SlotStatus; /* 0x00 */ > + U32 Mask; /* 0x04 */ > + U8 Activity; /* 0x08 */ > + U8 Locate; /* 0x09 */ > + U8 Error; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > +} MPI3_MAN13_TRANSLATION_INFO, MPI3_POINTER PTR_MPI3_MAN13_TRANSLATION_INFO, > + Mpi3Man13TranslationInfo, MPI3_POINTER pMpi3Man13TranslationInfo; > + > +/**** Defines for the SlotStatus field ****/ > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_FAULT (0x20000000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_OFF (0x10000000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_ACTIVITY (0x00800000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DO_NOT_REMOVE (0x00400000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_MISSING (0x00100000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_INSERT (0x00080000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REMOVAL (0x00040000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IDENTIFY (0x00020000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_OK (0x00008000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_RESERVED_DEVICE (0x00004000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_HOT_SPARE (0x00002000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_CONSISTENCY_CHECK (0x00001000) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000800) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_FAILED_ARRAY (0x00000400) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP (0x00000200) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP_ABORT (0x00000100) > +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_PREDICTED_FAILURE (0x00000040) > + > +/**** Defines for the Mask field - use MPI3_MAN13_TRANSLATION_SLOTSTATUS_ defines ****/ > + > +/**** Defines for the Activity, Locate, and Error fields ****/ > +#define MPI3_MAN13_BLINK_PATTERN_FORCE_OFF (0x00) > +#define MPI3_MAN13_BLINK_PATTERN_FORCE_ON (0x01) > +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_0 (0x02) > +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_1 (0x03) > +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_2 (0x04) > +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_3 (0x05) > +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_4 (0x06) > +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_5 (0x07) > +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_6 (0x08) > +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_7 (0x09) > +#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY (0x0A) > +#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY_TRAIL (0x0B) > + > +typedef struct _MPI3_MAN_PAGE13 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 NumTrans; /* 0x08 */ > + U8 Reserved09[3]; /* 0x09 */ > + U32 Reserved0C; /* 0x0C */ > + MPI3_MAN13_TRANSLATION_INFO Translation[MPI3_MAN13_NUM_TRANSLATION_MAX]; /* 0x10 */ /* variable length */ > +} MPI3_MAN_PAGE13, MPI3_POINTER PTR_MPI3_MAN_PAGE13, > + Mpi3ManPage13_t, MPI3_POINTER pMpi3ManPage13_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN13_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 14 * > + ****************************************************************************/ > + > +typedef struct _MPI3_MAN_PAGE14 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U16 Flags; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U8 NumSlotGroups; /* 0x0C */ > + U8 NumSlots; /* 0x0D */ > + U16 MaxCertChainLength; /* 0x0E */ > + U32 SealedSlots; /* 0x10 */ > +} MPI3_MAN_PAGE14, MPI3_POINTER PTR_MPI3_MAN_PAGE14, > + Mpi3ManPage14_t, MPI3_POINTER pMpi3ManPage14_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN14_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_MAN14_FLAGS_AUTH_SESSION_REQ (0x01) > +#define MPI3_MAN14_FLAGS_AUTH_API_MASK (0x0E) > +#define MPI3_MAN14_FLAGS_AUTH_API_NONE (0x00) > +#define MPI3_MAN14_FLAGS_AUTH_API_CEREBUS (0x02) > +#define MPI3_MAN14_FLAGS_AUTH_API_DMTF_PMCI (0x04) > + > +/***************************************************************************** > + * Manufacturing Page 15 * > + ****************************************************************************/ > + > +#ifndef MPI3_MAN15_VERSION_RECORD_MAX > +#define MPI3_MAN15_VERSION_RECORD_MAX 1 > +#endif /* MPI3_MAN15_VERSION_RECORD_MAX */ > + > +typedef struct _MPI3_MAN15_VERSION_RECORD { > + U16 SPDMVersion; /* 0x00 */ > + U16 Reserved02; /* 0x02 */ > +} MPI3_MAN15_VERSION_RECORD, MPI3_POINTER PTR_MPI3_MAN15_VERSION_RECORD, > + Mpi3Man15VersionRecord_t, MPI3_POINTER pMpi3Man15VersionRecord_t; > + > +typedef struct _MPI3_MAN_PAGE15 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 NumVersionRecords; /* 0x08 */ > + U8 Reserved09[3]; /* 0x09 */ > + U32 Reserved0C; /* 0x0C */ > + MPI3_MAN15_VERSION_RECORD VersionRecord[MPI3_MAN15_VERSION_RECORD_MAX]; /* 0x10 */ > +} MPI3_MAN_PAGE15, MPI3_POINTER PTR_MPI3_MAN_PAGE15, > + Mpi3ManPage15_t, MPI3_POINTER pMpi3ManPage15_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN15_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 16 * > + ****************************************************************************/ > + > +#ifndef MPI3_MAN16_CERT_ALGO_MAX > +#define MPI3_MAN16_CERT_ALGO_MAX 1 > +#endif /* MPI3_MAN16_CERT_ALGO_MAX */ > + > +typedef struct _MPI3_MAN16_CERTIFICATE_ALGORITHM { > + U8 SlotGroup; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U32 BaseAsymAlgo; /* 0x04 */ > + U32 BaseHashAlgo; /* 0x08 */ > + U32 Reserved0C[3]; /* 0x0C */ > +} MPI3_MAN16_CERTIFICATE_ALGORITHM, MPI3_POINTER PTR_MPI3_MAN16_CERTIFICATE_ALGORITHM, > + Mpi3Man16CertificateAlgorithm_t, MPI3_POINTER pMpi3Man16CertificateAlgorithm_t; > + > +typedef struct _MPI3_MAN_PAGE16 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumCertAlgos; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_MAN16_CERTIFICATE_ALGORITHM CertificateAlgorithm[MPI3_MAN16_CERT_ALGO_MAX]; /* 0x10 */ > +} MPI3_MAN_PAGE16, MPI3_POINTER PTR_MPI3_MAN_PAGE16, > + Mpi3ManPage16_t, MPI3_POINTER pMpi3ManPage16_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN16_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 17 * > + ****************************************************************************/ > + > +#ifndef MPI3_MAN17_HASH_ALGORITHM_MAX > +#define MPI3_MAN17_HASH_ALGORITHM_MAX 1 > +#endif /* MPI3_MAN17_HASH_ALGORITHM_MAX */ > + > +typedef struct _MPI3_MAN17_HASH_ALGORITHM { > + U8 MeasSpecification; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U32 MeasurementHashAlgo; /* 0x04 */ > + U32 Reserved08[2]; /* 0x08 */ > +} MPI3_MAN17_HASH_ALGORITHM, MPI3_POINTER PTR_MPI3_MAN17_HASH_ALGORITHM, > + Mpi3Man17HashAlgorithm_t, MPI3_POINTER pMpi3Man17HashAlgorithm_t; > + > +typedef struct _MPI3_MAN_PAGE17 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumHashAlgos; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_MAN17_HASH_ALGORITHM HashAlgorithm[MPI3_MAN17_HASH_ALGORITHM_MAX]; /* 0x10 */ > +} MPI3_MAN_PAGE17, MPI3_POINTER PTR_MPI3_MAN_PAGE17, > + Mpi3ManPage17_t, MPI3_POINTER pMpi3ManPage17_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN17_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * Manufacturing Page 20 * > + ****************************************************************************/ > + > +typedef struct _MPI3_MAN_PAGE20 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U32 NonpremiumFeatures; /* 0x0C */ > + U8 AllowedPersonalities; /* 0x10 */ > + U8 Reserved11[3]; /* 0x11 */ > +} MPI3_MAN_PAGE20, MPI3_POINTER PTR_MPI3_MAN_PAGE20, > + Mpi3ManPage20_t, MPI3_POINTER pMpi3ManPage20_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN20_PAGEVERSION (0x00) > + > +/**** Defines for the AllowedPersonalities field ****/ > +#define MPI3_MAN20_ALLOWEDPERSON_RAID_MASK (0x02) > +#define MPI3_MAN20_ALLOWEDPERSON_RAID_ALLOWED (0x02) > +#define MPI3_MAN20_ALLOWEDPERSON_RAID_NOT_ALLOWED (0x00) > +#define MPI3_MAN20_ALLOWEDPERSON_EHBA_MASK (0x01) > +#define MPI3_MAN20_ALLOWEDPERSON_EHBA_ALLOWED (0x01) > +#define MPI3_MAN20_ALLOWEDPERSON_EHBA_NOT_ALLOWED (0x00) > + > +/**** Defines for the NonpremuimFeatures field ****/ > +#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_MASK (0x01) > +#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_ENABLED (0x00) > +#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_DISABLED (0x01) > + > +/***************************************************************************** > + * Manufacturing Page 21 * > + ****************************************************************************/ > + > +typedef struct _MPI3_MAN_PAGE21 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U32 Flags; /* 0x0C */ > +} MPI3_MAN_PAGE21, MPI3_POINTER PTR_MPI3_MAN_PAGE21, > + Mpi3ManPage21_t, MPI3_POINTER pMpi3ManPage21_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_MAN21_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_MASK (0x80) > +#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_ENABLED (0x80) > +#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_DISABLED (0x00) > +#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_MASK (0x60) > +#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_BLOCK (0x00) > +#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_ALLOW (0x20) > +#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_WARN (0x40) > +#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_MASK (0x08) > +#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_ALLOW (0x00) > +#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_PREVENT (0x08) > +#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_MASK (0x01) > +#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_DEFAULT (0x00) > +#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_OEM_SPECIFIC (0x01) > + > +/***************************************************************************** > + * Manufacturing Pages 32-63 (ProductSpecific) * > + ****************************************************************************/ > +#ifndef MPI3_MAN_PROD_SPECIFIC_MAX > +#define MPI3_MAN_PROD_SPECIFIC_MAX (1) > +#endif /* MPI3_MAN_PROD_SPECIFIC_MAX */ > + > +typedef struct _MPI3_MAN_PAGE_PRODUCT_SPECIFIC { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 ProductSpecificInfo[MPI3_MAN_PROD_SPECIFIC_MAX]; /* 0x08 */ /* variable length array */ > +} MPI3_MAN_PAGE_PRODUCT_SPECIFIC, MPI3_POINTER PTR_MPI3_MAN_PAGE_PRODUCT_SPECIFIC, > + Mpi3ManPageProductSpecific_t, MPI3_POINTER pMpi3ManPageProductSpecific_t; > + > +/***************************************************************************** > + * IO Unit Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * IO Unit Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_IO_UNIT_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U64 UniqueValue; /* 0x08 */ > + U32 NvdataVersionDefault; /* 0x10 */ > + U32 NvdataVersionPersistent; /* 0x14 */ > +} MPI3_IO_UNIT_PAGE0, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE0, > + Mpi3IOUnitPage0_t, MPI3_POINTER pMpi3IOUnitPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT0_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * IO Unit Page 1 * > + ****************************************************************************/ > +typedef struct _MPI3_IO_UNIT_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Flags; /* 0x08 */ > + U8 DMDIoDelay; /* 0x0C */ > + U8 DMDReportPCIe; /* 0x0D */ > + U8 DMDReportSATA; /* 0x0E */ > + U8 DMDReportSAS; /* 0x0F */ > +} MPI3_IO_UNIT_PAGE1, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE1, > + Mpi3IOUnitPage1_t, MPI3_POINTER pMpi3IOUnitPage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT1_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_MASK (0x00000030) > +#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_ENABLE (0x00000000) > +#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_DISABLE (0x00000010) > +#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_NO_MODIFY (0x00000020) > +#define MPI3_IOUNIT1_FLAGS_ATA_SECURITY_FREEZE_LOCK (0x00000008) > +#define MPI3_IOUNIT1_FLAGS_WRITE_SAME_BUFFER (0x00000004) > +#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_MASK (0x00000003) > +#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_ENABLE (0x00000000) > +#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_DISABLE (0x00000001) > +#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_UNCHANGED (0x00000002) > + > +/**** Defines for the DMDReport PCIe/SATA/SAS fields ****/ > +#define MPI3_IOUNIT1_DMD_REPORT_DELAY_TIME_MASK (0x7F) > +#define MPI3_IOUNIT1_DMD_REPORT_UNIT_16_SEC (0x80) > + > +/***************************************************************************** > + * IO Unit Page 2 * > + ****************************************************************************/ > +#ifndef MPI3_IO_UNIT2_GPIO_VAL_MAX > +#define MPI3_IO_UNIT2_GPIO_VAL_MAX (1) > +#endif /* MPI3_IO_UNIT2_GPIO_VAL_MAX */ > + > +typedef struct _MPI3_IO_UNIT_PAGE2 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 GPIOCount; /* 0x08 */ > + U8 Reserved09[3]; /* 0x09 */ > + U16 GPIOVal[MPI3_IO_UNIT2_GPIO_VAL_MAX]; /* 0x0C */ > +} MPI3_IO_UNIT_PAGE2, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE2, > + Mpi3IOUnitPage2_t, MPI3_POINTER pMpi3IOUnitPage2_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT2_PAGEVERSION (0x00) > + > +/**** Define for the GPIOVal field ****/ > +#define MPI3_IOUNIT2_GPIO_FUNCTION_MASK (0xFFFC) > +#define MPI3_IOUNIT2_GPIO_FUNCTION_SHIFT (2) > +#define MPI3_IOUNIT2_GPIO_SETTING_MASK (0x0001) > +#define MPI3_IOUNIT2_GPIO_SETTING_OFF (0x0000) > +#define MPI3_IOUNIT2_GPIO_SETTING_ON (0x0001) > + > +/***************************************************************************** > + * IO Unit Page 3 * > + ****************************************************************************/ > + > +typedef struct _MPI3_IO_UNIT3_SENSOR { > + U16 Flags; /* 0x00 */ > + U16 Reserved02; /* 0x02 */ > + U16 Threshold[4]; /* 0x04 */ > + U32 Reserved0C; /* 0x0C */ > + U32 Reserved10; /* 0x10 */ > + U32 Reserved14; /* 0x14 */ > +} MPI3_IO_UNIT3_SENSOR, MPI3_POINTER PTR_MPI3_IO_UNIT3_SENSOR, > + Mpi3IOUnit3Sensor_t, MPI3_POINTER pMpi3IOUnit3Sensor_t; > + > +/**** Defines for the Flags field ****/ > +#define MPI3_IOUNIT3_SENSOR_FLAGS_T3_ENABLE (0x0008) > +#define MPI3_IOUNIT3_SENSOR_FLAGS_T2_ENABLE (0x0004) > +#define MPI3_IOUNIT3_SENSOR_FLAGS_T1_ENABLE (0x0002) > +#define MPI3_IOUNIT3_SENSOR_FLAGS_T0_ENABLE (0x0001) > + > +#ifndef MPI3_IO_UNIT3_SENSOR_MAX > +#define MPI3_IO_UNIT3_SENSOR_MAX (1) > +#endif /* MPI3_IO_UNIT3_SENSOR_MAX */ > + > +typedef struct _MPI3_IO_UNIT_PAGE3 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumSensors; /* 0x0C */ > + U8 PollingInterval; /* 0x0D */ > + U16 Reserved0E; /* 0x0E */ > + MPI3_IO_UNIT3_SENSOR Sensor[MPI3_IO_UNIT3_SENSOR_MAX]; /* 0x10 */ > +} MPI3_IO_UNIT_PAGE3, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE3, > + Mpi3IOUnitPage3_t, MPI3_POINTER pMpi3IOUnitPage3_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT3_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * IO Unit Page 4 * > + ****************************************************************************/ > +typedef struct _MPI3_IO_UNIT4_SENSOR { > + U16 CurrentTemperature; /* 0x00 */ > + U16 Reserved02; /* 0x02 */ > + U8 Flags; /* 0x04 */ > + U8 Reserved05[3]; /* 0x05 */ > + U32 Reserved08; /* 0x08 */ > + U32 Reserved0C; /* 0x0C */ > +} MPI3_IO_UNIT4_SENSOR, MPI3_POINTER PTR_MPI3_IO_UNIT4_SENSOR, > + Mpi3IOUnit4Sensor_t, MPI3_POINTER pMpi3IOUnit4Sensor_t; > + > +/**** Defines for the Flags field ****/ > +#define MPI3_IOUNIT4_SENSOR_FLAGS_TEMP_VALID (0x01) > + > +#ifndef MPI3_IO_UNIT4_SENSOR_MAX > +#define MPI3_IO_UNIT4_SENSOR_MAX (1) > +#endif /* MPI3_IO_UNIT4_SENSOR_MAX */ > + > +typedef struct _MPI3_IO_UNIT_PAGE4 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumSensors; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_IO_UNIT4_SENSOR Sensor[MPI3_IO_UNIT4_SENSOR_MAX]; /* 0x10 */ > +} MPI3_IO_UNIT_PAGE4, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE4, > + Mpi3IOUnitPage4_t, MPI3_POINTER pMpi3IOUnitPage4_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT4_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * IO Unit Page 5 * > + ****************************************************************************/ > +typedef struct _MPI3_IO_UNIT5_SPINUP_GROUP { > + U8 MaxTargetSpinup; /* 0x00 */ > + U8 SpinupDelay; /* 0x01 */ > + U8 SpinupFlags; /* 0x02 */ > + U8 Reserved03; /* 0x03 */ > +} MPI3_IO_UNIT5_SPINUP_GROUP, MPI3_POINTER PTR_MPI3_IO_UNIT5_SPINUP_GROUP, > + Mpi3IOUnit5SpinupGroup_t, MPI3_POINTER pMpi3IOUnit5SpinupGroup_t; > + > +/**** Defines for the SpinupFlags field ****/ > +#define MPI3_IOUNIT5_SPINUP_FLAGS_DISABLE (0x01) > + > +#ifndef MPI3_IO_UNIT5_PHY_MAX > +#define MPI3_IO_UNIT5_PHY_MAX (4) > +#endif /* MPI3_IO_UNIT5_PHY_MAX */ > + > +typedef struct _MPI3_IO_UNIT_PAGE5 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + MPI3_IO_UNIT5_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */ > + U32 Reserved18; /* 0x18 */ > + U32 Reserved1C; /* 0x1C */ > + U32 Reserved20; /* 0x20 */ > + U8 Reserved24; /* 0x24 */ > + U8 SATADeviceWaitTime; /* 0x25 */ > + U8 SpinupEnclDriveCount; /* 0x26 */ > + U8 SpinupEnclDelay; /* 0x27 */ > + U8 NumPhys; /* 0x28 */ > + U8 PEInitialSpinupDelay; /* 0x29 */ > + U8 TopologyStableTime; /* 0x2A */ > + U8 Flags; /* 0x2B */ > + U8 Phy[MPI3_IO_UNIT5_PHY_MAX]; /* 0x2C */ > +} MPI3_IO_UNIT_PAGE5, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE5, > + Mpi3IOUnitPage5_t, MPI3_POINTER pMpi3IOUnitPage5_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT5_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_IOUNIT5_FLAGS_POWER_CAPABLE_SPINUP (0x02) > +#define MPI3_IOUNIT5_FLAGS_AUTO_PORT_ENABLE (0x01) > + > +/**** Defines for the PHY field ****/ > +#define MPI3_IOUNIT5_PHY_SPINUP_GROUP_MASK (0x03) > + > +/***************************************************************************** > + * IO Unit Page 6 * > + ****************************************************************************/ > +typedef struct _MPI3_IO_UNIT_PAGE6 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 BoardPowerRequirement; /* 0x08 */ > + U32 PCISlotPowerAllocation; /* 0x0C */ > + U8 Flags; /* 0x10 */ > + U8 Reserved11[3]; /* 0x11 */ > +} MPI3_IO_UNIT_PAGE6, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE6, > + Mpi3IOUnitPage6_t, MPI3_POINTER pMpi3IOUnitPage6_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT6_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_IOUNIT6_FLAGS_ACT_CABLE_PWR_EXC (0x01) > + > +/***************************************************************************** > + * IO Unit Page 7 * > + ****************************************************************************/ > +typedef struct _MPI3_IO_UNIT_PAGE7 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > +} MPI3_IO_UNIT_PAGE7, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE7, > + Mpi3IOUnitPage7_t, MPI3_POINTER pMpi3IOUnitPage7_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT7_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * IO Unit Page 8 * > + ****************************************************************************/ > + > +#ifndef MPI3_IOUNIT8_DIGEST_MAX > +#define MPI3_IOUNIT8_DIGEST_MAX (1) > +#endif /* MPI3_IOUNIT8_DIGEST_MAX */ > + > +typedef union _MPI3_IOUNIT8_DIGEST { > + U32 Dword[16]; > + U16 Word[32]; > + U8 Byte[64]; > +} MPI3_IOUNIT8_DIGEST, MPI3_POINTER PTR_MPI3_IOUNIT8_DIGEST, > + Mpi3IOUnit8Digest, MPI3_POINTER pMpi3IOUnit8Digest; > + > +typedef struct _MPI3_IO_UNIT_PAGE8 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 SBMode; /* 0x08 */ > + U8 SbState; /* 0x09 */ > + U16 Reserved0A; /* 0x0A */ > + U8 NumSlots; /* 0x0C */ > + U8 SlotsAvailable; /* 0x0D */ > + U8 CurrentKeyEncryptionAlgo; /* 0x0E */ > + U8 KeyDigestHashAlgo; /* 0x0F */ > + U32 Reserved10[2]; /* 0x10 */ > + U32 CurrentKey[128]; /* 0x18 */ > + MPI3_IOUNIT8_DIGEST Digest[MPI3_IOUNIT8_DIGEST_MAX]; /* 0x218 */ /* variable length */ > +} MPI3_IO_UNIT_PAGE8, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE8, > + Mpi3IOUnitPage8_t, MPI3_POINTER pMpi3IOUnitPage8_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT8_PAGEVERSION (0x00) > + > +/**** Defines for the SBMode field ****/ > +#define MPI3_IOUNIT8_SBMODE_SECURE_DEBUG (0x04) > +#define MPI3_IOUNIT8_SBMODE_HARD_SECURE (0x02) > +#define MPI3_IOUNIT8_SBMODE_CONFIG_SECURE (0x01) > + > +/**** Defines for the SBState field ****/ > +#define MPI3_IOUNIT8_SBSTATE_KEY_UPDATE_PENDING (0x02) > +#define MPI3_IOUNIT8_SBSTATE_SECURE_BOOT_ENABLED (0x01) > + > +/***************************************************************************** > + * IO Unit Page 9 * > + ****************************************************************************/ > + > +typedef struct _MPI3_IO_UNIT_PAGE9 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Flags; /* 0x08 */ > + U16 FirstDevice; /* 0x0C */ > + U16 Reserved0E; /* 0x0E */ > +} MPI3_IO_UNIT_PAGE9, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE9, > + Mpi3IOUnitPage9_t, MPI3_POINTER pMpi3IOUnitPage9_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOUNIT9_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_IOUNIT9_FLAGS_VDFIRST_ENABLED (0x01) > + > +/**** Defines for the FirstDevice field ****/ > +#define MPI3_IOUNIT9_FIRSTDEVICE_UNKNOWN (0xFFFF) > + > +/***************************************************************************** > + * IOC Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * IOC Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_IOC_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U16 VendorID; /* 0x0C */ > + U16 DeviceID; /* 0x0E */ > + U8 RevisionID; /* 0x10 */ > + U8 Reserved11[3]; /* 0x11 */ > + U32 ClassCode; /* 0x14 */ > + U16 SubsystemVendorID; /* 0x18 */ > + U16 SubsystemID; /* 0x1A */ > +} MPI3_IOC_PAGE0, MPI3_POINTER PTR_MPI3_IOC_PAGE0, > + Mpi3IOCPage0_t, MPI3_POINTER pMpi3IOCPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOC0_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * IOC Page 1 * > + ****************************************************************************/ > +typedef struct _MPI3_IOC_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 CoalescingTimeout; /* 0x08 */ > + U8 CoalescingDepth; /* 0x0C */ > + U8 PCISlotNum; /* 0x0D */ > + U16 Reserved0E; /* 0x0E */ > +} MPI3_IOC_PAGE1, MPI3_POINTER PTR_MPI3_IOC_PAGE1, > + Mpi3IOCPage1_t, MPI3_POINTER pMpi3IOCPage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOC1_PAGEVERSION (0x00) > + > +/**** Defines for the PCISlotNum field ****/ > +#define MPI3_IOC1_PCISLOTNUM_UNKNOWN (0xFF) > + > +/***************************************************************************** > + * IOC Page 2 * > + ****************************************************************************/ > +#ifndef MPI3_IOC2_EVENTMASK_WORDS > +#define MPI3_IOC2_EVENTMASK_WORDS (4) > +#endif /* MPI3_IOC2_EVENTMASK_WORDS */ > + > +typedef struct _MPI3_IOC_PAGE2 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U16 SASBroadcastPrimitiveMasks; /* 0x0C */ > + U16 SASNotifyPrimitiveMasks; /* 0x0E */ > + U32 EventMasks[MPI3_IOC2_EVENTMASK_WORDS]; /* 0x10 */ > +} MPI3_IOC_PAGE2, MPI3_POINTER PTR_MPI3_IOC_PAGE2, > + Mpi3IOCPage2_t, MPI3_POINTER pMpi3IOCPage2_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_IOC2_PAGEVERSION (0x00) > + > + > +/***************************************************************************** > + * UEFI BSD and HII Configuration Pages * > + ****************************************************************************/ > +typedef struct _MPI3_UEFIBSD_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 BSDOptions; /* 0x08 */ > + U8 SSUTimeout; /* 0x0C */ > + U8 IOTimeout; /* 0x0D */ > + U8 TURRetries; /* 0x0E */ > + U8 TURInterval; /* 0x0F */ > + U8 Reserved10; /* 0x10 */ > + U8 SecurityKeyTimeout; /* 0x11 */ > + U16 Reserved12; /* 0x12 */ > + U32 Reserved14; /* 0x14 */ > + U32 Reserved18; /* 0x18 */ > +} MPI3_UEFIBSD_PAGE0, MPI3_POINTER PTR_MPI3_UEFIBSD_PAGE0, > + Mpi3UefiBsdPage0_t, MPI3_POINTER pMpi3UefiBsdPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_UEFIBSD_PAGEVERSION (0x00) > + > +/**** Defines for the BSDOptions field ****/ > +#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_MASK (0x00000003) > +#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_AND_DEVS (0x00000000) > +#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_ONLY (0x00000001) > +#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_NONE (0x00000002) > +#define MPI3_UEFIBSD_BSDOPTS_DIS_HII_CONFIG_UTIL (0x00000004) > +#define MPI3_UEFIBSD_BSDOPTS_EN_ADV_ADAPTER_CONFIG (0x00000008) > + > + > +/***************************************************************************** > + * Security Configuration Pages * > + ****************************************************************************/ > + > +typedef union _MPI3_SECURITY_MAC { > + U32 Dword[16]; > + U16 Word[32]; > + U8 Byte[64]; > +} MPI3_SECURITY_MAC, MPI3_POINTER PTR_MPI3_SECURITY_MAC, > + Mpi3SecurityMAC_t, MPI3_POINTER pMpi3SecurityMAC_t; > + > +typedef union _MPI3_SECURITY_NONCE { > + U32 Dword[16]; > + U16 Word[32]; > + U8 Byte[64]; > +} MPI3_SECURITY_NONCE, MPI3_POINTER PTR_MPI3_SECURITY_NONCE, > + Mpi3SecurityNonce_t, MPI3_POINTER pMpi3SecurityNonce_t; > + > +/***************************************************************************** > + * Security Page 0 * > + ****************************************************************************/ > + > +typedef union _MPI3_SECURITY0_CERT_CHAIN { > + U32 Dword[1024]; > + U16 Word[2048]; > + U8 Byte[4096]; > +} MPI3_SECURITY0_CERT_CHAIN, MPI3_POINTER PTR_MPI3_SECURITY0_CERT_CHAIN, > + Mpi3Security0CertChain_t, MPI3_POINTER pMpi3Security0CertChain_t; > + > +typedef struct _MPI3_SECURITY_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 SlotNumGroup; /* 0x08 */ > + U8 SlotNum; /* 0x09 */ > + U16 CertChainLength; /* 0x0A */ > + U8 CertChainFlags; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + U32 BaseAsymAlgo; /* 0x10 */ > + U32 BaseHashAlgo; /* 0x14 */ > + U32 Reserved18[4]; /* 0x18 */ > + MPI3_SECURITY_MAC MAC; /* 0x28 */ > + MPI3_SECURITY_NONCE Nonce; /* 0x68 */ > + MPI3_SECURITY0_CERT_CHAIN CertificateChain; /* 0xA8 */ > +} MPI3_SECURITY_PAGE0, MPI3_POINTER PTR_MPI3_SECURITY_PAGE0, > + Mpi3SecurityPage0_t, MPI3_POINTER pMpi3SecurityPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SECURITY0_PAGEVERSION (0x00) > + > +/**** Defines for the CertChainFlags field ****/ > +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_MASK (0x0E) > +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_UNUSED (0x00) > +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_CERBERUS (0x02) > +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_SPDM (0x04) > +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_SEALED (0x01) > + > +/***************************************************************************** > + * Security Page 1 * > + ****************************************************************************/ > + > +#ifndef MPI3_SECURITY1_KEY_RECORD_MAX > +#define MPI3_SECURITY1_KEY_RECORD_MAX 1 > +#endif /* MPI3_SECURITY1_KEY_RECORD_MAX */ > + > +#ifndef MPI3_SECURITY1_PAD_MAX > +#define MPI3_SECURITY1_PAD_MAX 1 > +#endif /* MPI3_SECURITY1_PAD_MAX */ > + > +typedef union _MPI3_SECURITY1_KEY_DATA { > + U32 Dword[128]; > + U16 Word[256]; > + U8 Byte[512]; > +} MPI3_SECURITY1_KEY_DATA, MPI3_POINTER PTR_MPI3_SECURITY1_KEY_DATA, > + Mpi3Security1KeyData_t, MPI3_POINTER pMpi3Security1KeyData_t; > + > +typedef struct _MPI3_SECURITY1_KEY_RECORD { > + U8 Flags; /* 0x00 */ > + U8 Consumer; /* 0x01 */ > + U16 KeyDataSize; /* 0x02 */ > + U32 AdditionalKeyData; /* 0x04 */ > + U32 Reserved08[2]; /* 0x08 */ > + MPI3_SECURITY1_KEY_DATA KeyData; /* 0x10 */ > +} MPI3_SECURITY1_KEY_RECORD, MPI3_POINTER PTR_MPI3_SECURITY1_KEY_RECORD, > + Mpi3Security1KeyRecord_t, MPI3_POINTER pMpi3Security1KeyRecord_t; > + > +/**** Defines for the Flags field ****/ > +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_MASK (0x1F) > +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_NOT_VALID (0x00) > +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_HMAC (0x01) > +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_AES (0x02) > +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PRIVATE (0x03) > +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PUBLIC (0x04) > + > +/**** Defines for the Consumer field ****/ > +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_NOT_VALID (0x00) > +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_SAFESTORE (0x01) > +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CERT_CHAIN (0x02) > +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_AUTH_DEV_KEY (0x03) > +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CACHE_OFFLOAD (0x04) > + > +typedef struct _MPI3_SECURITY_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08[2]; /* 0x08 */ > + MPI3_SECURITY_MAC MAC; /* 0x10 */ > + MPI3_SECURITY_NONCE Nonce; /* 0x50 */ > + U8 NumKeys; /* 0x90 */ > + U8 Reserved91[3]; /* 0x91 */ > + U32 Reserved94[3]; /* 0x94 */ > + MPI3_SECURITY1_KEY_RECORD KeyRecord[MPI3_SECURITY1_KEY_RECORD_MAX]; /* 0xA0 */ > + U8 Pad[MPI3_SECURITY1_PAD_MAX]; /* ?? */ > +} MPI3_SECURITY_PAGE1, MPI3_POINTER PTR_MPI3_SECURITY_PAGE1, > + Mpi3SecurityPage1_t, MPI3_POINTER pMpi3SecurityPage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SECURITY1_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * SAS IO Unit Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * SAS IO Unit Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_IO_UNIT0_PHY_DATA { > + U8 IOUnitPort; /* 0x00 */ > + U8 PortFlags; /* 0x01 */ > + U8 PhyFlags; /* 0x02 */ > + U8 NegotiatedLinkRate; /* 0x03 */ > + U16 ControllerPhyDeviceInfo; /* 0x04 */ > + U16 Reserved06; /* 0x06 */ > + U16 AttachedDevHandle; /* 0x08 */ > + U16 ControllerDevHandle; /* 0x0A */ > + U32 DiscoveryStatus; /* 0x0C */ > + U32 Reserved10; /* 0x10 */ > +} MPI3_SAS_IO_UNIT0_PHY_DATA, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT0_PHY_DATA, > + Mpi3SasIOUnit0PhyData_t, MPI3_POINTER pMpi3SasIOUnit0PhyData_t; > + > +#ifndef MPI3_SAS_IO_UNIT0_PHY_MAX > +#define MPI3_SAS_IO_UNIT0_PHY_MAX (1) > +#endif /* MPI3_SAS_IO_UNIT0_PHY_MAX */ > + > +typedef struct _MPI3_SAS_IO_UNIT_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumPhys; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_SAS_IO_UNIT0_PHY_DATA PhyData[MPI3_SAS_IO_UNIT0_PHY_MAX]; /* 0x10 */ > +} MPI3_SAS_IO_UNIT_PAGE0, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE0, > + Mpi3SasIOUnitPage0_t, MPI3_POINTER pMpi3SasIOUnitPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASIOUNIT0_PAGEVERSION (0x00) > + > +/**** Defines for the PortFlags field ****/ > +#define MPI3_SASIOUNIT0_PORTFLAGS_DISC_IN_PROGRESS (0x08) > +#define MPI3_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) > + > +/**** Defines for the PhyFlags field ****/ > +#define MPI3_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) > +#define MPI3_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) > +#define MPI3_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) > + > +/**** Use MPI3_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field ****/ > + > +/**** Use MPI3_SAS_DEVICE_INFO_ defines (see mpi30_sas.h) for the ControllerPhyDeviceInfo field ****/ > + > +/**** Use MPI3_SAS_DISC_STATUS_ defines (see mpi30_ioc.h) for the DiscoveryStatus field ****/ > + > +/***************************************************************************** > + * SAS IO Unit Page 1 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_IO_UNIT1_PHY_DATA { > + U8 IOUnitPort; /* 0x00 */ > + U8 PortFlags; /* 0x01 */ > + U8 PhyFlags; /* 0x02 */ > + U8 MaxMinLinkRate; /* 0x03 */ > + U16 ControllerPhyDeviceInfo; /* 0x04 */ > + U16 MaxTargetPortConnectTime; /* 0x06 */ > + U32 Reserved08; /* 0x08 */ > +} MPI3_SAS_IO_UNIT1_PHY_DATA, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT1_PHY_DATA, > + Mpi3SasIOUnit1PhyData_t, MPI3_POINTER pMpi3SasIOUnit1PhyData_t; > + > +#ifndef MPI3_SAS_IO_UNIT1_PHY_MAX > +#define MPI3_SAS_IO_UNIT1_PHY_MAX (1) > +#endif /* MPI3_SAS_IO_UNIT1_PHY_MAX */ > + > +typedef struct _MPI3_SAS_IO_UNIT_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U16 ControlFlags; /* 0x08 */ > + U16 SASNarrowMaxQueueDepth; /* 0x0A */ > + U16 AdditionalControlFlags; /* 0x0C */ > + U16 SASWideMaxQueueDepth; /* 0x0E */ > + U8 NumPhys; /* 0x10 */ > + U8 SATAMaxQDepth; /* 0x11 */ > + U16 Reserved12; /* 0x12 */ > + MPI3_SAS_IO_UNIT1_PHY_DATA PhyData[MPI3_SAS_IO_UNIT1_PHY_MAX]; /* 0x14 */ > +} MPI3_SAS_IO_UNIT_PAGE1, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE1, > + Mpi3SasIOUnitPage1_t, MPI3_POINTER pMpi3SasIOUnitPage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASIOUNIT1_PAGEVERSION (0x00) > + > +/**** Defines for the ControlFlags field ****/ > +#define MPI3_SASIOUNIT1_CONTROL_CONTROLLER_DEVICE_SELF_TEST (0x8000) > +#define MPI3_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) > +#define MPI3_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) > +#define MPI3_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) > +#define MPI3_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) > +#define MPI3_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) > +#define MPI3_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) > +#define MPI3_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) > +#define MPI3_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) > +#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_MASK (0x0001) > +#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_DEVICE_NAME (0x0000) > +#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_SAS_ADDRESS (0x0001) > + > +/**** Defines for the AdditionalControlFlags field ****/ > +#define MPI3_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100) > +#define MPI3_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) > +#define MPI3_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) > +#define MPI3_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) > +#define MPI3_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) > +#define MPI3_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) > +#define MPI3_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) > +#define MPI3_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) > +#define MPI3_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) > + > +/**** Defines for the PortFlags field ****/ > +#define MPI3_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) > + > +/**** Defines for the PhyFlags field ****/ > +#define MPI3_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) > +#define MPI3_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) > +#define MPI3_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) > + > +/**** Defines for the MaxMinLinkRate field ****/ > +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_MASK (0xF0) > +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_SHIFT (4) > +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_6_0 (0xA0) > +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_12_0 (0xB0) > +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_22_5 (0xC0) > +#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_MASK (0x0F) > +#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_6_0 (0x0A) > +#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_12_0 (0x0B) > +#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_22_5 (0x0C) > + > +/**** Use MPI3_SAS_DEVICE_INFO_ defines (see mpi30_sas.h) for the ControllerPhyDeviceInfo field ****/ > + > +/***************************************************************************** > + * SAS IO Unit Page 2 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS { > + U8 ControlFlags; /* 0x00 */ > + U8 Reserved01; /* 0x01 */ > + U16 InactivityTimerExponent; /* 0x02 */ > + U8 SATAPartialTimeout; /* 0x04 */ > + U8 Reserved05; /* 0x05 */ > + U8 SATASlumberTimeout; /* 0x06 */ > + U8 Reserved07; /* 0x07 */ > + U8 SASPartialTimeout; /* 0x08 */ > + U8 Reserved09; /* 0x09 */ > + U8 SASSlumberTimeout; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > +} MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS, > + Mpi3SasIOUnit2PhyPmSettings_t, MPI3_POINTER pMpi3SasIOUnit2PhyPmSettings_t; > + > +#ifndef MPI3_SAS_IO_UNIT2_PHY_MAX > +#define MPI3_SAS_IO_UNIT2_PHY_MAX (1) > +#endif /* MPI3_SAS_IO_UNIT2_PHY_MAX */ > + > +typedef struct _MPI3_SAS_IO_UNIT_PAGE2 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 NumPhys; /* 0x08 */ > + U8 Reserved09[3]; /* 0x09 */ > + U32 Reserved0C; /* 0x0C */ > + MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS SASPhyPowerManagementSettings[MPI3_SAS_IO_UNIT2_PHY_MAX]; /* 0x10 */ > +} MPI3_SAS_IO_UNIT_PAGE2, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE2, > + Mpi3SasIOUnitPage2_t, MPI3_POINTER pMpi3SasIOUnitPage2_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASIOUNIT2_PAGEVERSION (0x00) > + > +/**** Defines for the ControlFlags field ****/ > +#define MPI3_SASIOUNIT2_CONTROL_SAS_SLUMBER_ENABLE (0x08) > +#define MPI3_SASIOUNIT2_CONTROL_SAS_PARTIAL_ENABLE (0x04) > +#define MPI3_SASIOUNIT2_CONTROL_SATA_SLUMBER_ENABLE (0x02) > +#define MPI3_SASIOUNIT2_CONTROL_SATA_PARTIAL_ENABLE (0x01) > + > +/**** Defines for the InactivityTimerExponent field ****/ > +#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_MASK (0x7000) > +#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_SHIFT (12) > +#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_MASK (0x0700) > +#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_SHIFT (8) > +#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_MASK (0x0070) > +#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_SHIFT (4) > +#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_MASK (0x0007) > +#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_SHIFT (0) > + > +#define MPI3_SASIOUNIT2_ITE_EXP_TEN_SECONDS (7) > +#define MPI3_SASIOUNIT2_ITE_EXP_ONE_SECOND (6) > +#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MILLISECONDS (5) > +#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MILLISECONDS (4) > +#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MILLISECOND (3) > +#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MICROSECONDS (2) > +#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MICROSECONDS (1) > +#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MICROSECOND (0) > + > +/***************************************************************************** > + * SAS IO Unit Page 3 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_IO_UNIT_PAGE3 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U32 PowerManagementCapabilities; /* 0x0C */ > +} MPI3_SAS_IO_UNIT_PAGE3, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE3, > + Mpi3SasIOUnitPage3_t, MPI3_POINTER pMpi3SasIOUnitPage3_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASIOUNIT3_PAGEVERSION (0x00) > + > +/**** Defines for the PowerManagementCapabilities field ****/ > +#define MPI3_SASIOUNIT3_PM_HOST_SAS_SLUMBER_MODE (0x00000800) > +#define MPI3_SASIOUNIT3_PM_HOST_SAS_PARTIAL_MODE (0x00000400) > +#define MPI3_SASIOUNIT3_PM_HOST_SATA_SLUMBER_MODE (0x00000200) > +#define MPI3_SASIOUNIT3_PM_HOST_SATA_PARTIAL_MODE (0x00000100) > +#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) > +#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) > +#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) > +#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) > + > + > +/***************************************************************************** > + * SAS Expander Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * SAS Expander Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_EXPANDER_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 IOUnitPort; /* 0x08 */ > + U8 ReportGenLength; /* 0x09 */ > + U16 EnclosureHandle; /* 0x0A */ > + U32 Reserved0C; /* 0x0C */ > + U64 SASAddress; /* 0x10 */ > + U32 DiscoveryStatus; /* 0x18 */ > + U16 DevHandle; /* 0x1C */ > + U16 ParentDevHandle; /* 0x1E */ > + U16 ExpanderChangeCount; /* 0x20 */ > + U16 ExpanderRouteIndexes; /* 0x22 */ > + U8 NumPhys; /* 0x24 */ > + U8 SASLevel; /* 0x25 */ > + U16 Flags; /* 0x26 */ > + U16 STPBusInactivityTimeLimit; /* 0x28 */ > + U16 STPMaxConnectTimeLimit; /* 0x2A */ > + U16 STP_SMP_NexusLossTime; /* 0x2C */ > + U16 MaxNumRoutedSASAddresses; /* 0x2E */ > + U64 ActiveZoneManagerSASAddress; /* 0x30 */ > + U16 ZoneLockInactivityLimit; /* 0x38 */ > + U16 Reserved3A; /* 0x3A */ > + U8 TimeToReducedFunc; /* 0x3C */ > + U8 InitialTimeToReducedFunc; /* 0x3D */ > + U8 MaxReducedFuncTime; /* 0x3E */ > + U8 ExpStatus; /* 0x3F */ > +} MPI3_SAS_EXPANDER_PAGE0, MPI3_POINTER PTR_MPI3_SAS_EXPANDER_PAGE0, > + Mpi3SasExpanderPage0_t, MPI3_POINTER pMpi3SasExpanderPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASEXPANDER0_PAGEVERSION (0x00) > + > +/**** Use MPI3_SAS_DISC_STATUS_ defines (see mpi30_ioc.h) for the DiscoveryStatus field ****/ > + > +/**** Defines for the Flags field ****/ > +#define MPI3_SASEXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) > +#define MPI3_SASEXPANDER0_FLAGS_ZONE_LOCKED (0x1000) > +#define MPI3_SASEXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) > +#define MPI3_SASEXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) > +#define MPI3_SASEXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) > +#define MPI3_SASEXPANDER0_FLAGS_ENABLED_ZONING (0x0100) > +#define MPI3_SASEXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) > +#define MPI3_SASEXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) > +#define MPI3_SASEXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) > +#define MPI3_SASEXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) > +#define MPI3_SASEXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) > + > +/**** Defines for the ExpStatus field ****/ > +#define MPI3_SASEXPANDER0_ES_NOT_RESPONDING (0x02) > +#define MPI3_SASEXPANDER0_ES_RESPONDING (0x03) > +#define MPI3_SASEXPANDER0_ES_DELAY_NOT_RESPONDING (0x04) > + > +/***************************************************************************** > + * SAS Expander Page 1 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_EXPANDER_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 IOUnitPort; /* 0x08 */ > + U8 Reserved09[3]; /* 0x09 */ > + U8 NumPhys; /* 0x0C */ > + U8 Phy; /* 0x0D */ > + U16 NumTableEntriesProgrammed; /* 0x0E */ > + U8 ProgrammedLinkRate; /* 0x10 */ > + U8 HwLinkRate; /* 0x11 */ > + U16 AttachedDevHandle; /* 0x12 */ > + U32 PhyInfo; /* 0x14 */ > + U16 AttachedDeviceInfo; /* 0x18 */ > + U16 Reserved1A; /* 0x1A */ > + U16 ExpanderDevHandle; /* 0x1C */ > + U8 ChangeCount; /* 0x1E */ > + U8 NegotiatedLinkRate; /* 0x1F */ > + U8 PhyIdentifier; /* 0x20 */ > + U8 AttachedPhyIdentifier; /* 0x21 */ > + U8 Reserved22; /* 0x22 */ > + U8 DiscoveryInfo; /* 0x23 */ > + U32 AttachedPhyInfo; /* 0x24 */ > + U8 ZoneGroup; /* 0x28 */ > + U8 SelfConfigStatus; /* 0x29 */ > + U16 Reserved2A; /* 0x2A */ > + U16 Slot; /* 0x2C */ > + U16 SlotIndex; /* 0x2E */ > +} MPI3_SAS_EXPANDER_PAGE1, MPI3_POINTER PTR_MPI3_SAS_EXPANDER_PAGE1, > + Mpi3SasExpanderPage1_t, MPI3_POINTER pMpi3SasExpanderPage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASEXPANDER1_PAGEVERSION (0x00) > + > +/**** Defines for the ProgrammedLinkRate field - use MPI3_SAS_PRATE_ defines ****/ > + > +/**** Defines for the HwLinkRate field - use MPI3_SAS_HWRATE_ defines ****/ > + > +/**** Defines for the PhyInfo field - use MPI3_SAS_PHYINFO_ defines ****/ > + > +/**** Defines for the AttachedDeviceInfo field - use MPI3_SAS_DEVICE_INFO_ defines ****/ > + > +/**** Defines for the NegotiatedLinkRate field - use MPI3_SAS_NEG_LINK_RATE_ defines ****/ > + > +/**** Defines for the DiscoveryInfo field ****/ > +#define MPI3_SASEXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) > +#define MPI3_SASEXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) > +#define MPI3_SASEXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) > + > +/**** Defines for the AttachedPhyInfo field - use MPI3_SAS_APHYINFO_ defines ****/ > + > +/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/ > + > +/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ ****/ > + > + > +/***************************************************************************** > + * SAS Port Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * SAS Port Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_PORT_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 PortNumber; /* 0x08 */ > + U8 Reserved09; /* 0x09 */ > + U8 PortWidth; /* 0x0A */ > + U8 Reserved0B; /* 0x0B */ > + U8 ZoneGroup; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + U64 SASAddress; /* 0x10 */ > + U16 DeviceInfo; /* 0x18 */ > + U16 Reserved1A; /* 0x1A */ > + U32 Reserved1C; /* 0x1C */ > +} MPI3_SAS_PORT_PAGE0, MPI3_POINTER PTR_MPI3_SAS_PORT_PAGE0, > + Mpi3SasPortPage0, MPI3_POINTER pMpi3SasPortPage0; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASPORT0_PAGEVERSION (0x00) > + > +/**** Defines for the DeviceInfo field - use MPI3_SAS_DEVICE_INFO_ defines ****/ > + > +/***************************************************************************** > + * SAS PHY Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * SAS PHY Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_PHY_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U16 OwnerDevHandle; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U16 AttachedDevHandle; /* 0x0C */ > + U8 AttachedPhyIdentifier; /* 0x0E */ > + U8 Reserved0F; /* 0x0F */ > + U32 AttachedPhyInfo; /* 0x10 */ > + U8 ProgrammedLinkRate; /* 0x14 */ > + U8 HwLinkRate; /* 0x15 */ > + U8 ChangeCount; /* 0x16 */ > + U8 Flags; /* 0x17 */ > + U32 PhyInfo; /* 0x18 */ > + U8 NegotiatedLinkRate; /* 0x1C */ > + U8 Reserved1D[3]; /* 0x1D */ > + U16 Slot; /* 0x20 */ > + U16 SlotIndex; /* 0x22 */ > +} MPI3_SAS_PHY_PAGE0, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE0, > + Mpi3SasPhyPage0_t, MPI3_POINTER pMpi3SasPhyPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASPHY0_PAGEVERSION (0x00) > + > +/**** Defines for the AttachedPhyInfo field - use MPI3_SAS_APHYINFO_ defines ****/ > + > +/**** Defines for the ProgrammedLinkRate field - use MPI3_SAS_PRATE_ defines ****/ > + > +/**** Defines for the HwLinkRate field - use MPI3_SAS_HWRATE_ defines ****/ > + > +/**** Defines for the Flags field ****/ > +#define MPI3_SASPHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) > + > +/**** Defines for the PhyInfo field - use MPI3_SAS_PHYINFO_ defines ****/ > + > +/**** Defines for the NegotiatedLinkRate field - use MPI3_SAS_NEG_LINK_RATE_ defines ****/ > + > +/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/ > + > +/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ ****/ > + > +/***************************************************************************** > + * SAS PHY Page 1 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_PHY_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U32 InvalidDwordCount; /* 0x0C */ > + U32 RunningDisparityErrorCount; /* 0x10 */ > + U32 LossDwordSynchCount; /* 0x14 */ > + U32 PhyResetProblemCount; /* 0x18 */ > +} MPI3_SAS_PHY_PAGE1, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE1, > + Mpi3SasPhyPage1_t, MPI3_POINTER pMpi3SasPhyPage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASPHY1_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * SAS PHY Page 2 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_PHY2_PHY_EVENT { > + U8 PhyEventCode; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U32 PhyEventInfo; /* 0x04 */ > +} MPI3_SAS_PHY2_PHY_EVENT, MPI3_POINTER PTR_MPI3_SAS_PHY2_PHY_EVENT, > + Mpi3SasPhy2PhyEvent_t, MPI3_POINTER pMpi3SasPhy2PhyEvent_t; > + > +/**** Defines for the PhyEventCode field - use MPI3_SASPHY3_EVENT_CODE_ defines */ > + > +#ifndef MPI3_SAS_PHY2_PHY_EVENT_MAX > +#define MPI3_SAS_PHY2_PHY_EVENT_MAX (1) > +#endif /* MPI3_SAS_PHY2_PHY_EVENT_MAX */ > + > +typedef struct _MPI3_SAS_PHY_PAGE2 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumPhyEvents; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_SAS_PHY2_PHY_EVENT PhyEvent[MPI3_SAS_PHY2_PHY_EVENT_MAX]; /* 0x10 */ > +} MPI3_SAS_PHY_PAGE2, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE2, > + Mpi3SasPhyPage2_t, MPI3_POINTER pMpi3SasPhyPage2_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASPHY2_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * SAS PHY Page 3 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_PHY3_PHY_EVENT_CONFIG { > + U8 PhyEventCode; /* 0x00 */ > + U8 Reserved01[3]; /* 0x01 */ > + U8 CounterType; /* 0x04 */ > + U8 ThresholdWindow; /* 0x05 */ > + U8 TimeUnits; /* 0x06 */ > + U8 Reserved07; /* 0x07 */ > + U32 EventThreshold; /* 0x08 */ > + U16 ThresholdFlags; /* 0x0C */ > + U16 Reserved0E; /* 0x0E */ > +} MPI3_SAS_PHY3_PHY_EVENT_CONFIG, MPI3_POINTER PTR_MPI3_SAS_PHY3_PHY_EVENT_CONFIG, > + Mpi3SasPhy3PhyEventConfig_t, MPI3_POINTER pMpi3SasPhy3PhyEventConfig_t; > + > +/**** Defines for the PhyEventCode field ****/ > +#define MPI3_SASPHY3_EVENT_CODE_NO_EVENT (0x00) > +#define MPI3_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) > +#define MPI3_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) > +#define MPI3_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) > +#define MPI3_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) > +#define MPI3_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) > +#define MPI3_SASPHY3_EVENT_CODE_RX_ERROR (0x06) > +#define MPI3_SASPHY3_EVENT_CODE_INV_SPL_PACKETS (0x07) > +#define MPI3_SASPHY3_EVENT_CODE_LOSS_SPL_PACKET_SYNC (0x08) > +#define MPI3_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) > +#define MPI3_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) > +#define MPI3_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) > +#define MPI3_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) > +#define MPI3_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) > +#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) > +#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) > +#define MPI3_SASPHY3_EVENT_CODE_TX_BREAK (0x27) > +#define MPI3_SASPHY3_EVENT_CODE_RX_BREAK (0x28) > +#define MPI3_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) > +#define MPI3_SASPHY3_EVENT_CODE_CONNECTION (0x2A) > +#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) > +#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) > +#define MPI3_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) > +#define MPI3_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) > +#define MPI3_SASPHY3_EVENT_CODE_PERSIST_CONN (0x2F) > +#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) > +#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) > +#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) > +#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) > +#define MPI3_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) > +#define MPI3_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) > +#define MPI3_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) > +#define MPI3_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) > +#define MPI3_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) > +#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) > +#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) > +#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) > +#define MPI3_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) > +#define MPI3_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) > +#define MPI3_SASPHY3_EVENT_CODE_RX_AIP (0xD2) > +#define MPI3_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3) > +#define MPI3_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4) > +#define MPI3_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5) > +#define MPI3_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6) > +#define MPI3_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7) > +#define MPI3_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8) > +#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9) > +#define MPI3_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA) > +#define MPI3_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB) > +#define MPI3_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC) > + > +/**** Defines for the CounterType field ****/ > +#define MPI3_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) > +#define MPI3_SASPHY3_COUNTER_TYPE_SATURATING (0x01) > +#define MPI3_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) > + > +/**** Defines for the TimeUnits field ****/ > +#define MPI3_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) > +#define MPI3_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) > +#define MPI3_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) > +#define MPI3_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) > + > +/**** Defines for the ThresholdFlags field ****/ > +#define MPI3_SASPHY3_TFLAGS_PHY_RESET (0x0002) > +#define MPI3_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) > + > +#ifndef MPI3_SAS_PHY3_PHY_EVENT_MAX > +#define MPI3_SAS_PHY3_PHY_EVENT_MAX (1) > +#endif /* MPI3_SAS_PHY3_PHY_EVENT_MAX */ > + > +typedef struct _MPI3_SAS_PHY_PAGE3 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumPhyEvents; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > + MPI3_SAS_PHY3_PHY_EVENT_CONFIG PhyEventConfig[MPI3_SAS_PHY3_PHY_EVENT_MAX]; /* 0x10 */ > +} MPI3_SAS_PHY_PAGE3, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE3, > + Mpi3SasPhyPage3_t, MPI3_POINTER pMpi3SasPhyPage3_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASPHY3_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * SAS PHY Page 4 * > + ****************************************************************************/ > +typedef struct _MPI3_SAS_PHY_PAGE4 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 Reserved08[3]; /* 0x08 */ > + U8 Flags; /* 0x0B */ > + U8 InitialFrame[28]; /* 0x0C */ > +} MPI3_SAS_PHY_PAGE4, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE4, > + Mpi3SasPhyPage4_t, MPI3_POINTER pMpi3SasPhyPage4_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_SASPHY4_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_SASPHY4_FLAGS_FRAME_VALID (0x02) > +#define MPI3_SASPHY4_FLAGS_SATA_FRAME (0x01) > + > + > +/***************************************************************************** > + * Common definitions used by PCIe Configuration Pages * > + ****************************************************************************/ > + > +/**** Defines for Negotiated Link Rates ****/ > +#define MPI3_PCIE_LINK_RETIMERS_MASK (0x30) > +#define MPI3_PCIE_LINK_RETIMERS_SHIFT (4) > +#define MPI3_PCIE_NEG_LINK_RATE_MASK (0x0F) > +#define MPI3_PCIE_NEG_LINK_RATE_UNKNOWN (0x00) > +#define MPI3_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01) > +#define MPI3_PCIE_NEG_LINK_RATE_2_5 (0x02) > +#define MPI3_PCIE_NEG_LINK_RATE_5_0 (0x03) > +#define MPI3_PCIE_NEG_LINK_RATE_8_0 (0x04) > +#define MPI3_PCIE_NEG_LINK_RATE_16_0 (0x05) > +#define MPI3_PCIE_NEG_LINK_RATE_32_0 (0x06) > + > +/***************************************************************************** > + * PCIe IO Unit Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * PCIe IO Unit Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_PCIE_IO_UNIT0_PHY_DATA { > + U8 Link; /* 0x00 */ > + U8 LinkFlags; /* 0x01 */ > + U8 PhyFlags; /* 0x02 */ > + U8 NegotiatedLinkRate; /* 0x03 */ > + U16 AttachedDevHandle; /* 0x04 */ > + U16 ControllerDevHandle; /* 0x06 */ > + U32 EnumerationStatus; /* 0x08 */ > + U8 IOUnitPort; /* 0x0C */ > + U8 Reserved0D[3]; /* 0x0D */ > +} MPI3_PCIE_IO_UNIT0_PHY_DATA, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT0_PHY_DATA, > + Mpi3PcieIOUnit0PhyData_t, MPI3_POINTER pMpi3PcieIOUnit0PhyData_t; > + > +/**** Defines for the LinkFlags field ****/ > +#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_MASK (0x10) > +#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_IOUNIT1 (0x00) > +#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_BKPLANE (0x10) > +#define MPI3_PCIEIOUNIT0_LINKFLAGS_ENUM_IN_PROGRESS (0x08) > + > +/**** Defines for the PhyFlags field ****/ > +#define MPI3_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) > +#define MPI3_PCIEIOUNIT0_PHYFLAGS_HOST_PHY (0x01) > + > +/**** Defines for the NegotiatedLinkRate field - use MPI3_PCIE_NEG_LINK_RATE_ defines ****/ > + > +/**** Defines for the EnumerationStatus field ****/ > +#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCH_DEPTH_EXCEEDED (0x80000000) > +#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000) > +#define MPI3_PCIEIOUNIT0_ES_MAX_ENDPOINTS_EXCEEDED (0x20000000) > +#define MPI3_PCIEIOUNIT0_ES_INSUFFICIENT_RESOURCES (0x10000000) > + > +#ifndef MPI3_PCIE_IO_UNIT0_PHY_MAX > +#define MPI3_PCIE_IO_UNIT0_PHY_MAX (1) > +#endif /* MPI3_PCIE_IO_UNIT0_PHY_MAX */ > + > +typedef struct _MPI3_PCIE_IO_UNIT_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 Reserved08; /* 0x08 */ > + U8 NumPhys; /* 0x0C */ > + U8 InitStatus; /* 0x0D */ > + U16 Reserved0E; /* 0x0E */ > + MPI3_PCIE_IO_UNIT0_PHY_DATA PhyData[MPI3_PCIE_IO_UNIT0_PHY_MAX]; /* 0x10 */ > +} MPI3_PCIE_IO_UNIT_PAGE0, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT_PAGE0, > + Mpi3PcieIOUnitPage0_t, MPI3_POINTER pMpi3PcieIOUnitPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_PCIEIOUNIT0_PAGEVERSION (0x00) > + > +/**** Defines for the InitStatus field ****/ > +#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_ERRORS (0x00) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_NEEDS_INITIALIZATION (0x01) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_TARGETS_ALLOCATED (0x02) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_RESOURCE_ALLOC_FAILED (0x03) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_NUM_PHYS (0x04) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_UNSUPPORTED_CONFIG (0x05) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_HOST_PORT_MISMATCH (0x06) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_PHYS_NOT_CONSECUTIVE (0x07) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_CLOCKING_MODE (0x08) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_START (0xF0) > +#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_END (0xFF) > + > +/***************************************************************************** > + * PCIe IO Unit Page 1 * > + ****************************************************************************/ > +typedef struct _MPI3_PCIE_IO_UNIT1_PHY_DATA { > + U8 Link; /* 0x00 */ > + U8 LinkFlags; /* 0x01 */ > + U8 PhyFlags; /* 0x02 */ > + U8 MaxMinLinkRate; /* 0x03 */ > + U32 Reserved04; /* 0x04 */ > + U32 Reserved08; /* 0x08 */ > +} MPI3_PCIE_IO_UNIT1_PHY_DATA, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT1_PHY_DATA, > + Mpi3PcieIOUnit1PhyData_t, MPI3_POINTER pMpi3PcieIOUnit1PhyData_t; > + > +/**** Defines for the LinkFlags field ****/ > +#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_MASK (0x03) > +#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_DIS_SEPARATE_REFCLK (0x00) > +#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRIS (0x01) > +#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRNS (0x02) > + > +/**** Defines for the PhyFlags field ****/ > +#define MPI3_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) > + > +/**** Defines for the MaxMinLinkRate ****/ > +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_MASK (0xF0) > +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_SHIFT (4) > +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_2_5 (0x20) > +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_5_0 (0x30) > +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_8_0 (0x40) > +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_16_0 (0x50) > +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_32_0 (0x60) > + > +#ifndef MPI3_PCIE_IO_UNIT1_PHY_MAX > +#define MPI3_PCIE_IO_UNIT1_PHY_MAX (1) > +#endif /* MPI3_PCIE_IO_UNIT1_PHY_MAX */ > + > +typedef struct _MPI3_PCIE_IO_UNIT_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U32 ControlFlags; /* 0x08 */ > + U32 Reserved0C; /* 0x0C */ > + U8 NumPhys; /* 0x10 */ > + U8 Reserved11; /* 0x11 */ > + U16 Reserved12; /* 0x12 */ > + MPI3_PCIE_IO_UNIT1_PHY_DATA PhyData[MPI3_PCIE_IO_UNIT1_PHY_MAX]; /* 0x14 */ > +} MPI3_PCIE_IO_UNIT_PAGE1, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT_PAGE1, > + Mpi3PcieIOUnitPage1_t, MPI3_POINTER pMpi3PcieIOUnitPage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_PCIEIOUNIT1_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * PCIe IO Unit Page 2 * > + ****************************************************************************/ > +typedef struct _MPI3_PCIE_IO_UNIT_PAGE2 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U16 NVMeMaxQueueDepth; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U8 NVMeAbortTO; /* 0x0C */ > + U8 Reserved0D; /* 0x0D */ > + U16 Reserved0E; /* 0x0E */ > +} MPI3_PCIE_IO_UNIT_PAGE2, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT_PAGE2, > + Mpi3PcieIOUnitPage2_t, MPI3_POINTER pMpi3PcieIOUnitPage2_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_PCIEIOUNIT2_PAGEVERSION (0x00) > + > +/***************************************************************************** > + * PCIe Switch Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * PCIe Switch Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_PCIE_SWITCH_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 IOUnitPort; /* 0x08 */ > + U8 SwitchStatus; /* 0x09 */ > + U8 Reserved0A[2]; /* 0x0A */ > + U16 DevHandle; /* 0x0C */ > + U16 ParentDevHandle; /* 0x0E */ > + U8 NumPorts; /* 0x10 */ > + U8 PCIeLevel; /* 0x11 */ > + U16 Reserved12; /* 0x12 */ > + U32 Reserved14; /* 0x14 */ > + U32 Reserved18; /* 0x18 */ > + U32 Reserved1C; /* 0x1C */ > +} MPI3_PCIE_SWITCH_PAGE0, MPI3_POINTER PTR_MPI3_PCIE_SWITCH_PAGE0, > + Mpi3PcieSwitchPage0_t, MPI3_POINTER pMpi3PcieSwitchPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_PCIESWITCH0_PAGEVERSION (0x00) > + > +/**** Defines for the SwitchStatus field ****/ > +#define MPI3_PCIESWITCH0_SS_NOT_RESPONDING (0x02) > +#define MPI3_PCIESWITCH0_SS_RESPONDING (0x03) > +#define MPI3_PCIESWITCH0_SS_DELAY_NOT_RESPONDING (0x04) > + > +/***************************************************************************** > + * PCIe Switch Page 1 * > + ****************************************************************************/ > +typedef struct _MPI3_PCIE_SWITCH_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 IOUnitPort; /* 0x08 */ > + U8 Reserved09[3]; /* 0x09 */ > + U8 NumPorts; /* 0x0C */ > + U8 PortNum; /* 0x0D */ > + U16 AttachedDevHandle; /* 0x0E */ > + U16 SwitchDevHandle; /* 0x10 */ > + U8 NegotiatedPortWidth; /* 0x12 */ > + U8 NegotiatedLinkRate; /* 0x13 */ > + U16 Slot; /* 0x14 */ > + U16 SlotIndex; /* 0x16 */ > + U32 Reserved18; /* 0x18 */ > +} MPI3_PCIE_SWITCH_PAGE1, MPI3_POINTER PTR_MPI3_PCIE_SWITCH_PAGE1, > + Mpi3PcieSwitchPage1_t, MPI3_POINTER pMpi3PcieSwitchPage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_PCIESWITCH1_PAGEVERSION (0x00) > + > +/**** Defines for the NegotiatedLinkRate field - use MPI3_PCIE_NEG_LINK_RATE_ defines ****/ > + > +/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/ > + > +/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ ****/ > + > +/***************************************************************************** > + * PCIe Link Configuration Pages * > + ****************************************************************************/ > +typedef struct _MPI3_PCIE_LINK_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U8 Link; /* 0x08 */ > + U8 Reserved09[3]; /* 0x09 */ > + U32 CorrectableErrorCount; /* 0x0C */ > + U16 NFatalErrorCount; /* 0x10 */ > + U16 Reserved12; /* 0x12 */ > + U16 FatalErrorCount; /* 0x14 */ > + U16 Reserved16; /* 0x16 */ > +} MPI3_PCIE_LINK_PAGE0, MPI3_POINTER PTR_MPI3_PCIE_LINK_PAGE0, > + Mpi3PcieLinkPage0_t, MPI3_POINTER pMpi3PcieLinkPage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_PCIELINK0_PAGEVERSION (0x00) > + > + > +/***************************************************************************** > + * Enclosure Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * Enclosure Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_ENCLOSURE_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U64 EnclosureLogicalID; /* 0x08 */ > + U16 Flags; /* 0x10 */ > + U16 EnclosureHandle; /* 0x12 */ > + U16 NumSlots; /* 0x14 */ > + U16 StartSlot; /* 0x16 */ > + U8 IOUnitPort; /* 0x18 */ > + U8 EnclosureLevel; /* 0x19 */ > + U16 SEPDevHandle; /* 0x1A */ > + U32 Reserved1C; /* 0x1C */ > +} MPI3_ENCLOSURE_PAGE0, MPI3_POINTER PTR_MPI3_ENCLOSURE_PAGE0, > + Mpi3EnclosurePage0_t, MPI3_POINTER pMpi3EnclosurePage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_ENCLOSURE0_PAGEVERSION (0x00) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_MASK (0xC000) > +#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_VIRTUAL (0x0000) > +#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_SAS (0x4000) > +#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_PCIE (0x8000) > +#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT_MASK (0x0010) > +#define MPI3_ENCLS0_FLAGS_ENCL_DEV_NOT_FOUND (0x0000) > +#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT (0x0010) > +#define MPI3_ENCLS0_FLAGS_MNG_MASK (0x000F) > +#define MPI3_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) > +#define MPI3_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) > +#define MPI3_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0002) > + > +/**** Defines for the PhysicalPort field - use MPI3_DEVICE0_PHYPORT_ defines ****/ > + > +/***************************************************************************** > + * Device Configuration Pages * > + ****************************************************************************/ > + > +/***************************************************************************** > + * Common definitions used by Device Configuration Pages * > + ****************************************************************************/ > + > +/**** Defines for the DeviceForm field ****/ > +#define MPI3_DEVICE_DEVFORM_SAS_SATA (0x00) > +#define MPI3_DEVICE_DEVFORM_PCIE (0x01) > +#define MPI3_DEVICE_DEVFORM_VD (0x02) > + > +/***************************************************************************** > + * Device Page 0 * > + ****************************************************************************/ > +typedef struct _MPI3_DEVICE0_SAS_SATA_FORMAT { > + U64 SASAddress; /* 0x00 */ > + U16 Flags; /* 0x08 */ > + U16 DeviceInfo; /* 0x0A */ > + U8 PhyNum; /* 0x0C */ > + U8 AttachedPhyIdentifier; /* 0x0D */ > + U8 MaxPortConnections; /* 0x0E */ > + U8 ZoneGroup; /* 0x0F */ > +} MPI3_DEVICE0_SAS_SATA_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_SAS_SATA_FORMAT, > + Mpi3Device0SasSataFormat_t, MPI3_POINTER pMpi3Device0SasSataFormat_t; > + > +/**** Defines for the Flags field ****/ > +#define MPI3_DEVICE0_SASSATA_FLAGS_SLUMBER_CAP (0x0200) > +#define MPI3_DEVICE0_SASSATA_FLAGS_PARTIAL_CAP (0x0100) > +#define MPI3_DEVICE0_SASSATA_FLAGS_ASYNC_NOTIFY (0x0080) > +#define MPI3_DEVICE0_SASSATA_FLAGS_SW_PRESERVE (0x0040) > +#define MPI3_DEVICE0_SASSATA_FLAGS_UNSUPP_DEV (0x0020) > +#define MPI3_DEVICE0_SASSATA_FLAGS_48BIT_LBA (0x0010) > +#define MPI3_DEVICE0_SASSATA_FLAGS_SMART_SUPP (0x0008) > +#define MPI3_DEVICE0_SASSATA_FLAGS_NCQ_SUPP (0x0004) > +#define MPI3_DEVICE0_SASSATA_FLAGS_FUA_SUPP (0x0002) > +#define MPI3_DEVICE0_SASSATA_FLAGS_PERSIST_CAP (0x0001) > + > +/**** Defines for the DeviceInfo field - use MPI3_SAS_DEVICE_INFO_ defines (see mpi30_sas.h) ****/ > + > +typedef struct _MPI3_DEVICE0_PCIE_FORMAT { > + U8 SupportedLinkRates; /* 0x00 */ > + U8 MaxPortWidth; /* 0x01 */ > + U8 NegotiatedPortWidth; /* 0x02 */ > + U8 NegotiatedLinkRate; /* 0x03 */ > + U8 PortNum; /* 0x04 */ > + U8 ControllerResetTO; /* 0x05 */ > + U16 DeviceInfo; /* 0x06 */ > + U32 MaximumDataTransferSize; /* 0x08 */ > + U32 Capabilities; /* 0x0C */ > + U16 NOIOB; /* 0x10 */ > + U8 NVMeAbortTO; /* 0x12 */ > + U8 PageSize; /* 0x13 */ > + U16 ShutdownLatency; /* 0x14 */ > + U16 Reserved16; /* 0x16 */ > +} MPI3_DEVICE0_PCIE_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_PCIE_FORMAT, > + Mpi3Device0PcieFormat_t, MPI3_POINTER pMpi3Device0PcieFormat_t; > + > +/**** Defines for the SupportedLinkRates field ****/ > +#define MPI3_DEVICE0_PCIE_LINK_RATE_32_0_SUPP (0x10) > +#define MPI3_DEVICE0_PCIE_LINK_RATE_16_0_SUPP (0x08) > +#define MPI3_DEVICE0_PCIE_LINK_RATE_8_0_SUPP (0x04) > +#define MPI3_DEVICE0_PCIE_LINK_RATE_5_0_SUPP (0x02) > +#define MPI3_DEVICE0_PCIE_LINK_RATE_2_5_SUPP (0x01) > + > +/**** Defines for the NegotiatedLinkRate field - use MPI3_PCIE_NEG_LINK_RATE_ defines ****/ > + > +/**** Defines for DeviceInfo bitfield ****/ > +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK (0x0003) > +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NO_DEVICE (0x0000) > +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE (0x0001) > +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SWITCH_DEVICE (0x0002) > +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE (0x0003) > + > +/**** Defines for the Capabilities field ****/ > +#define MPI3_DEVICE0_PCIE_CAP_METADATA_SEPARATED (0x00000010) > +#define MPI3_DEVICE0_PCIE_CAP_SGL_DWORD_ALIGN_REQUIRED (0x00000008) > +#define MPI3_DEVICE0_PCIE_CAP_NVME_SGL_ENABLED (0x00000004) > +#define MPI3_DEVICE0_PCIE_CAP_BIT_BUCKET_SGL_SUPP (0x00000002) > +#define MPI3_DEVICE0_PCIE_CAP_SGL_SUPP (0x00000001) > + > +typedef struct _MPI3_DEVICE0_VD_FORMAT { > + U8 VdState; /* 0x00 */ > + U8 RAIDLevel; /* 0x01 */ > + U16 DeviceInfo; /* 0x02 */ > + U16 Flags; /* 0x04 */ > + U16 Reserved06; /* 0x06 */ > + U32 Reserved08[2]; /* 0x08 */ > +} MPI3_DEVICE0_VD_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_VD_FORMAT, > + Mpi3Device0VdFormat_t, MPI3_POINTER pMpi3Device0VdFormat_t; > + > +/**** Defines for the VdState field ****/ > +#define MPI3_DEVICE0_VD_STATE_OFFLINE (0x00) > +#define MPI3_DEVICE0_VD_STATE_PARTIALLY_DEGRADED (0x01) > +#define MPI3_DEVICE0_VD_STATE_DEGRADED (0x02) > +#define MPI3_DEVICE0_VD_STATE_OPTIMAL (0x03) > + > +/**** Defines for RAIDLevel field ****/ > +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_0 (0) > +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_1 (1) > +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_5 (5) > +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_6 (6) > +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_10 (10) > +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_50 (50) > +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_60 (60) > + > +/**** Defines for DeviceInfo field ****/ > +#define MPI3_DEVICE0_VD_DEVICE_INFO_HDD (0x0010) > +#define MPI3_DEVICE0_VD_DEVICE_INFO_SSD (0x0008) > +#define MPI3_DEVICE0_VD_DEVICE_INFO_NVME (0x0004) > +#define MPI3_DEVICE0_VD_DEVICE_INFO_SATA (0x0002) > +#define MPI3_DEVICE0_VD_DEVICE_INFO_SAS (0x0001) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_MASK (0x0003) > +#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_NONE (0x0000) > +#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_HOST (0x0001) > +#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_IOC (0x0002) > + > +typedef union _MPI3_DEVICE0_DEV_SPEC_FORMAT { > + MPI3_DEVICE0_SAS_SATA_FORMAT SasSataFormat; > + MPI3_DEVICE0_PCIE_FORMAT PcieFormat; > + MPI3_DEVICE0_VD_FORMAT VdFormat; > +} MPI3_DEVICE0_DEV_SPEC_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_DEV_SPEC_FORMAT, > + Mpi3Device0DevSpecFormat_t, MPI3_POINTER pMpi3Device0DevSpecFormat_t; > + > +typedef struct _MPI3_DEVICE_PAGE0 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U16 DevHandle; /* 0x08 */ > + U16 ParentDevHandle; /* 0x0A */ > + U16 Slot; /* 0x0C */ > + U16 EnclosureHandle; /* 0x0E */ > + U64 WWID; /* 0x10 */ > + U16 PersistentID; /* 0x18 */ > + U8 IOUnitPort; /* 0x1A */ > + U8 AccessStatus; /* 0x1B */ > + U16 Flags; /* 0x1C */ > + U16 Reserved1E; /* 0x1E */ > + U16 SlotIndex; /* 0x20 */ > + U16 QueueDepth; /* 0x22 */ > + U8 Reserved24[3]; /* 0x24 */ > + U8 DeviceForm; /* 0x27 */ > + MPI3_DEVICE0_DEV_SPEC_FORMAT DeviceSpecific; /* 0x28 */ > +} MPI3_DEVICE_PAGE0, MPI3_POINTER PTR_MPI3_DEVICE_PAGE0, > + Mpi3DevicePage0_t, MPI3_POINTER pMpi3DevicePage0_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_DEVICE0_PAGEVERSION (0x00) > + > +/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/ > + > +/**** Defines for the WWID field ****/ > +#define MPI3_DEVICE0_WWID_INVALID (0xFFFFFFFFFFFFFFFF) > + > +/**** Defines for the PersistentID field ****/ > +#define MPI3_DEVICE0_PERSISTENTID_INVALID (0xFFFF) > + > +/**** Defines for the IOUnitPort field ****/ > +#define MPI3_DEVICE0_IOUNITPORT_INVALID (0xFF) > + > +/**** Defines for the AccessStatus field ****/ > +/* Generic Access Status Codes */ > +#define MPI3_DEVICE0_ASTATUS_NO_ERRORS (0x00) > +#define MPI3_DEVICE0_ASTATUS_NEEDS_INITIALIZATION (0x01) > +#define MPI3_DEVICE0_ASTATUS_CAP_UNSUPPORTED (0x02) > +#define MPI3_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x03) > +#define MPI3_DEVICE0_ASTATUS_UNAUTHORIZED (0x04) > +#define MPI3_DEVICE0_ASTATUS_DEVICE_MISSING_DELAY (0x05) > +/* SAS Access Status Codes */ > +#define MPI3_DEVICE0_ASTATUS_SAS_UNKNOWN (0x10) > +#define MPI3_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x11) > +#define MPI3_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x12) > +/* SATA Access Status Codes */ > +#define MPI3_DEVICE0_ASTATUS_SIF_UNKNOWN (0x20) > +#define MPI3_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x21) > +#define MPI3_DEVICE0_ASTATUS_SIF_DIAG (0x22) > +#define MPI3_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x23) > +#define MPI3_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x24) > +#define MPI3_DEVICE0_ASTATUS_SIF_PIO_SN (0x25) > +#define MPI3_DEVICE0_ASTATUS_SIF_MDMA_SN (0x26) > +#define MPI3_DEVICE0_ASTATUS_SIF_UDMA_SN (0x27) > +#define MPI3_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x28) > +#define MPI3_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x29) > +#define MPI3_DEVICE0_ASTATUS_SIF_MAX (0x2F) > +/* PCIe Access Status Codes */ > +#define MPI3_DEVICE0_ASTATUS_PCIE_UNKNOWN (0x30) > +#define MPI3_DEVICE0_ASTATUS_PCIE_MEM_SPACE_ACCESS (0x31) > +#define MPI3_DEVICE0_ASTATUS_PCIE_UNSUPPORTED (0x32) > +#define MPI3_DEVICE0_ASTATUS_PCIE_MSIX_REQUIRED (0x33) > +/* NVMe Access Status Codes */ > +#define MPI3_DEVICE0_ASTATUS_NVME_UNKNOWN (0x40) > +#define MPI3_DEVICE0_ASTATUS_NVME_READY_TIMEOUT (0x41) > +#define MPI3_DEVICE0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x42) > +#define MPI3_DEVICE0_ASTATUS_NVME_IDENTIFY_FAILED (0x43) > +#define MPI3_DEVICE0_ASTATUS_NVME_QCONFIG_FAILED (0x44) > +#define MPI3_DEVICE0_ASTATUS_NVME_QCREATION_FAILED (0x45) > +#define MPI3_DEVICE0_ASTATUS_NVME_EVENTCFG_FAILED (0x46) > +#define MPI3_DEVICE0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x47) > +#define MPI3_DEVICE0_ASTATUS_NVME_IDLE_TIMEOUT (0x48) > +#define MPI3_DEVICE0_ASTATUS_NVME_CTRL_FAILURE_STATUS (0x49) > +/* Virtual Device Access Status Codes */ > +#define MPI3_DEVICE0_ASTATUS_VD_UNKNOWN (0x50) > + > +/**** Defines for the Flags field ****/ > +#define MPI3_DEVICE0_FLAGS_CONTROLLER_DEV_HANDLE (0x0080) > +#define MPI3_DEVICE0_FLAGS_HIDDEN (0x0008) > +#define MPI3_DEVICE0_FLAGS_ATT_METHOD_MASK (0x0006) > +#define MPI3_DEVICE0_FLAGS_ATT_METHOD_NOT_DIR_ATTACHED (0x0000) > +#define MPI3_DEVICE0_FLAGS_ATT_METHOD_DIR_ATTACHED (0x0002) > +#define MPI3_DEVICE0_FLAGS_ATT_METHOD_VIRTUAL (0x0004) > +#define MPI3_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) > + > +/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ defines ****/ > + > +/**** Defines for the DeviceForm field - use MPI3_DEVICE_DEVFORM_ defines ****/ > + > +/**** Defines for the QueueDepth field ****/ > +#define MPI3_DEVICE0_QUEUE_DEPTH_NOT_APPLICABLE (0x0000) > + > + > +/***************************************************************************** > + * Device Page 1 * > + ****************************************************************************/ > +typedef struct _MPI3_DEVICE1_SAS_SATA_FORMAT { > + U32 Reserved00; /* 0x00 */ > +} MPI3_DEVICE1_SAS_SATA_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_SAS_SATA_FORMAT, > + Mpi3Device1SasSataFormat_t, MPI3_POINTER pMpi3Device1SasSataFormat_t; > + > +typedef struct _MPI3_DEVICE1_PCIE_FORMAT { > + U16 VendorID; /* 0x00 */ > + U16 DeviceID; /* 0x02 */ > + U16 SubsystemVendorID; /* 0x04 */ > + U16 SubsystemID; /* 0x06 */ > + U32 Reserved08; /* 0x08 */ > + U8 RevisionID; /* 0x0C */ > + U8 Reserved0D; /* 0x0D */ > + U16 PCIParameters; /* 0x0E */ > +} MPI3_DEVICE1_PCIE_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_PCIE_FORMAT, > + Mpi3Device1PcieFormat_t, MPI3_POINTER pMpi3Device1PcieFormat_t; > + > +/**** Defines for the PCIParameters field ****/ > +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_128B (0x0) > +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_256B (0x1) > +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_512B (0x2) > +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_1024B (0x3) > +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_2048B (0x4) > +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_4096B (0x5) > + > +/*** MaxReadRequestSize, CurrentMaxPayloadSize, and MaxPayloadSizeSupported ***/ > +/*** all use the size definitions above - shifted to the proper position ***/ > +#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_MASK (0x01C0) > +#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_SHIFT (6) > +#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_MASK (0x0038) > +#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_SHIFT (3) > +#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_MASK (0x0007) > +#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_SHIFT (0) > + > +typedef struct _MPI3_DEVICE1_VD_FORMAT { > + U32 Reserved00; /* 0x00 */ > +} MPI3_DEVICE1_VD_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_VD_FORMAT, > + Mpi3Device1VdFormat_t, MPI3_POINTER pMpi3Device1VdFormat_t; > + > +typedef union _MPI3_DEVICE1_DEV_SPEC_FORMAT { > + MPI3_DEVICE1_SAS_SATA_FORMAT SasSataFormat; > + MPI3_DEVICE1_PCIE_FORMAT PcieFormat; > + MPI3_DEVICE1_VD_FORMAT VdFormat; > +} MPI3_DEVICE1_DEV_SPEC_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_DEV_SPEC_FORMAT, > + Mpi3Device1DevSpecFormat_t, MPI3_POINTER pMpi3Device1DevSpecFormat_t; > + > +typedef struct _MPI3_DEVICE_PAGE1 { > + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ > + U16 DevHandle; /* 0x08 */ > + U16 Reserved0A; /* 0x0A */ > + U32 Reserved0C[12]; /* 0x0C */ > + U8 Reserved3C[3]; /* 0x3C */ > + U8 DeviceForm; /* 0x3F */ > + MPI3_DEVICE1_DEV_SPEC_FORMAT DeviceSpecific; /* 0x40 */ > +} MPI3_DEVICE_PAGE1, MPI3_POINTER PTR_MPI3_DEVICE_PAGE1, > + Mpi3DevicePage1_t, MPI3_POINTER pMpi3DevicePage1_t; > + > +/**** Defines for the PageVersion field ****/ > +#define MPI3_DEVICE1_PAGEVERSION (0x00) > + > +/**** Defines for the DeviceForm field - use MPI3_DEVICE_DEVFORM_ defines ****/ > + > +#endif /* MPI30_CNFG_H */ > diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_sas.h b/drivers/scsi/mpi3mr/mpi/mpi30_sas.h > new file mode 100644 > index 000000000000..b60a5899437e > --- /dev/null > +++ b/drivers/scsi/mpi3mr/mpi/mpi30_sas.h > @@ -0,0 +1,46 @@ > +/* > + * Copyright 2016-2020 Broadcom Inc. All rights reserved. > + * > + * Name: mpi30_sas.h > + * Description: Contains MPI Serial Attached SCSI structures and definitions > + * Creation Date: 12/08/2016 > + * Version: 03.00.00 > + */ > +#ifndef MPI30_SAS_H > +#define MPI30_SAS_H 1 > + > +/***************************************************************************** > + * SAS Device Info Definitions * > + ****************************************************************************/ > +#define MPI3_SAS_DEVICE_INFO_SSP_TARGET (0x00000100) > +#define MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET (0x00000080) > +#define MPI3_SAS_DEVICE_INFO_SMP_TARGET (0x00000040) > +#define MPI3_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000020) > +#define MPI3_SAS_DEVICE_INFO_STP_INITIATOR (0x00000010) > +#define MPI3_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000008) > +#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK (0x00000007) > +#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_NO_DEVICE (0x00000000) > +#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE (0x00000001) > +#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_EXPANDER (0x00000002) > + > +/***************************************************************************** > + * SMP Passthrough Request Message * > + ****************************************************************************/ > +typedef struct _MPI3_SMP_PASSTHROUGH_REQUEST { > + U16 HostTag; /* 0x00 */ > + U8 IOCUseOnly02; /* 0x02 */ > + U8 Function; /* 0x03 */ > + U16 IOCUseOnly04; /* 0x04 */ > + U8 IOCUseOnly06; /* 0x06 */ > + U8 MsgFlags; /* 0x07 */ > + U16 ChangeCount; /* 0x08 */ > + U8 Reserved0A; /* 0x0A */ > + U8 IOUnitPort; /* 0x0B */ > + U32 Reserved0C[3]; /* 0x0C */ > + U64 SASAddress; /* 0x18 */ > + MPI3_SGE_SIMPLE RequestSGE; /* 0x20 */ > + MPI3_SGE_SIMPLE ResponseSGE; /* 0x30 */ > +} MPI3_SMP_PASSTHROUGH_REQUEST, MPI3_POINTER PTR_MPI3_SMP_PASSTHROUGH_REQUEST, > + Mpi3SmpPassthroughRequest_t, MPI3_POINTER pMpi3SmpPassthroughRequest_t; > + > +#endif /* MPI30_SAS_H */ > diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h > index 7769ba16c9bc..063877f1bc37 100644 > --- a/drivers/scsi/mpi3mr/mpi3mr.h > +++ b/drivers/scsi/mpi3mr/mpi3mr.h > @@ -134,6 +134,10 @@ extern struct list_head mrioc_list; > #define MPI3MR_RSP_IO_QUEUED_ON_IOC \ > MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC > > +#define MPI3MR_DEFAULT_MDTS (128 * 1024) > +/* Command retry count definitions */ > +#define MPI3MR_DEV_RMHS_RETRY_COUNT 3 > + > /* SGE Flag definition */ > #define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \ > (MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \ > @@ -313,6 +317,126 @@ struct mpi3mr_intr_info { > char name[MPI3MR_NAME_LENGTH]; > }; > > +/** > + * struct tgt_dev_sas_sata - SAS/SATA device specific > + * information cached from firmware given data > + * > + * @sas_address: World wide unique SAS address > + * @dev_info: Device information bits > + */ > +struct tgt_dev_sas_sata { > + u64 sas_address; > + u16 dev_info; > +}; > + > +/** > + * struct tgt_dev_pcie - PCIe device specific information cached > + * from firmware given data > + * > + * @mdts: Maximum data transfer size > + * @capb: Device capabilities > + * @pgsz: Device page size > + * @abort_to: Timeout for abort TM > + * @reset_to: Timeout for Target/LUN reset TM > + */ > +struct tgt_dev_pcie { > + u32 mdts; > + u16 capb; > + u8 pgsz; > + u8 abort_to; > + u8 reset_to; > +}; > + > +/** > + * struct tgt_dev_volume - virtual device specific information > + * cached from firmware given data > + * > + * @state: State of the VD > + */ > +struct tgt_dev_volume { > + u8 state; > +}; > + > +/** > + * union _form_spec_inf - union of device specific information > + */ > +union _form_spec_inf { > + struct tgt_dev_sas_sata sas_sata_inf; > + struct tgt_dev_pcie pcie_inf; > + struct tgt_dev_volume vol_inf; > +}; > + > + > + > +/** > + * struct mpi3mr_tgt_dev - target device data structure > + * > + * @list: List pointer > + * @starget: Scsi_target pointer > + * @dev_handle: FW device handle > + * @parent_handle: FW parent device handle > + * @slot: Slot number > + * @encl_handle: FW enclosure handle > + * @perst_id: FW assigned Persistent ID > + * @dev_type: SAS/SATA/PCIE device type > + * @is_hidden: Should be exposed to upper layers or not > + * @host_exposed: Already exposed to host or not > + * @q_depth: Device specific Queue Depth > + * @wwid: World wide ID > + * @dev_spec: Device type specific information > + * @ref_count: Reference count > + */ > +struct mpi3mr_tgt_dev { > + struct list_head list; > + struct scsi_target *starget; > + u16 dev_handle; > + u16 parent_handle; > + u16 slot; > + u16 encl_handle; > + u16 perst_id; > + u8 dev_type; > + u8 is_hidden; > + u8 host_exposed; > + u16 q_depth; > + u64 wwid; > + union _form_spec_inf dev_spec; > + struct kref ref_count; > +}; > + > +/** > + * mpi3mr_tgtdev_get - k reference incrementor > + * @s: Target device reference > + * > + * Increment target device reference count. > + */ > +static inline void mpi3mr_tgtdev_get(struct mpi3mr_tgt_dev *s) > +{ > + kref_get(&s->ref_count); > +} > + > +/** > + * mpi3mr_free_tgtdev - target device memory dealloctor > + * @r: k reference pointer of the target device > + * > + * Free target device memory when no reference. > + */ > +static inline void mpi3mr_free_tgtdev(struct kref *r) > +{ > + kfree(container_of(r, struct mpi3mr_tgt_dev, ref_count)); > +} > + > +/** > + * mpi3mr_tgtdev_put - k reference decrementor > + * @s: Target device reference > + * > + * Decrement target device reference count. > + */ > +static inline void mpi3mr_tgtdev_put(struct mpi3mr_tgt_dev *s) > +{ > + kref_put(&s->ref_count, mpi3mr_free_tgtdev); > +} > + > + > /** > * struct mpi3mr_stgt_priv_data - SCSI target private structure > * > @@ -358,6 +482,7 @@ struct mpi3mr_sdev_priv_data { > * @done: Completeor for wakeup > * @reply: Firmware reply for internal commands > * @sensebuf: Sensebuf for SCSI IO commands > + * @iou_rc: IO Unit control reason code > * @state: Command State > * @dev_handle: Firmware handle for device specific commands > * @ioc_status: IOC status from the firmware > @@ -372,6 +497,7 @@ struct mpi3mr_drv_cmd { > struct completion done; > void *reply; > u8 *sensebuf; > + u8 iou_rc; > u16 state; > u16 dev_handle; > u16 ioc_status; > @@ -478,6 +604,11 @@ struct scmd_priv { > * @sense_buf_q_dma: Sense buffer queue DMA address > * @sbq_lock: Sense buffer queue lock > * @sbq_host_index: Sense buffer queuehost index > + * @event_masks: Event mask bitmap > + * @fwevt_worker_name: Firmware event worker thread name > + * @fwevt_worker_thread: Firmware event worker thread > + * @fwevt_lock: Firmware event lock > + * @fwevt_list: Firmware event list > * @watchdog_work_q_name: Fault watchdog worker thread name > * @watchdog_work_q: Fault watchdog worker thread > * @watchdog_work: Fault watchdog work > @@ -493,6 +624,12 @@ struct scmd_priv { > * @chain_bitmap_sz: Chain buffer allocator bitmap size > * @chain_bitmap: Chain buffer allocator bitmap > * @chain_buf_lock: Chain buffer list lock > + * @dev_rmhs_cmds: Command tracker for device removal commands > + * @devrem_bitmap_sz: Device removal bitmap size > + * @devrem_bitmap: Device removal bitmap > + * @dev_handle_bitmap_sz: Device handle bitmap size > + * @removepend_bitmap: Remove pending bitmap > + * @delayed_rmhs_list: Delayed device removal list > * @reset_in_progress: Reset in progress flag > * @unrecoverable: Controller unrecoverable flag > * @diagsave_timeout: Diagnostic information save timeout > @@ -576,6 +713,12 @@ struct mpi3mr_ioc { > dma_addr_t sense_buf_q_dma; > spinlock_t sbq_lock; > u32 sbq_host_index; > + u32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS]; > + > + char fwevt_worker_name[MPI3MR_NAME_LENGTH]; > + struct workqueue_struct *fwevt_worker_thread; > + spinlock_t fwevt_lock; > + struct list_head fwevt_list; > > char watchdog_work_q_name[20]; > struct workqueue_struct *watchdog_work_q; > @@ -588,6 +731,8 @@ struct mpi3mr_ioc { > u8 stop_drv_processing; > > u16 max_host_ios; > + spinlock_t tgtdev_lock; > + struct list_head tgtdev_list; > > u32 chain_buf_count; > struct dma_pool *chain_buf_pool; > @@ -596,6 +741,13 @@ struct mpi3mr_ioc { > void *chain_bitmap; > spinlock_t chain_buf_lock; > > + struct mpi3mr_drv_cmd dev_rmhs_cmds[MPI3MR_NUM_DEVRMCMD]; > + u16 devrem_bitmap_sz; > + void *devrem_bitmap; > + u16 dev_handle_bitmap_sz; > + void *removepend_bitmap; > + struct list_head delayed_rmhs_list; > + > u8 reset_in_progress; > u8 unrecoverable; > > @@ -608,6 +760,45 @@ struct mpi3mr_ioc { > u16 op_reply_q_offset; > }; > > +/** > + * struct mpi3mr_fwevt - Firmware event structure. > + * > + * @list: list head > + * @work: Work structure > + * @mrioc: Adapter instance reference > + * @event_id: MPI3 firmware event ID > + * @send_ack: Event acknowledgment required or not > + * @process_evt: Bottomhalf processing required or not > + * @evt_ctx: Event context to send in Ack > + * @ref_count: kref count > + * @event_data: Actual MPI3 event data > + */ > +struct mpi3mr_fwevt { > + struct list_head list; > + struct work_struct work; > + struct mpi3mr_ioc *mrioc; > + u16 event_id; > + bool send_ack; > + bool process_evt; > + u32 evt_ctx; > + struct kref ref_count; > + char event_data[0] __aligned(4); > +}; > + > + > +/** > + * struct delayed_dev_rmhs_node - Delayed device removal node > + * > + * @list: list head > + * @handle: Device handle > + * @iou_rc: IO Unit Control Reason Code > + */ > +struct delayed_dev_rmhs_node { > + struct list_head list; > + u16 handle; > + u8 iou_rc; > +}; > + > int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc); > void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc); > int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc); > @@ -627,6 +818,8 @@ void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc, > void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc, > u64 sense_buf_dma); > > +void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc, > + Mpi3EventNotificationReply_t *event_reply); > void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc, > Mpi3DefaultReplyDescriptor_t *reply_desc, > u64 *reply_dma, u16 qidx); > @@ -639,5 +832,14 @@ void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc); > void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc); > > enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc); > +int mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event, > + u32 event_ctx); > + > +void mpi3mr_wait_for_host_io(struct mpi3mr_ioc *mrioc, u32 timeout); > +void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc); > +void mpi3mr_flush_host_io(struct mpi3mr_ioc *mrioc); > +void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc); > +void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc); > +void mpi3mr_flush_delayed_rmhs_list(struct mpi3mr_ioc *mrioc); > > #endif /*MPI3MR_H_INCLUDED*/ > diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c > index ef238091523b..668dd001b6b4 100644 > --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c > +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c > @@ -160,12 +160,14 @@ static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc, > (Mpi3EventNotificationReply_t *)def_reply; > > mrioc->change_count = le16_to_cpu(event_reply->IOCChangeCount); > + mpi3mr_os_handle_events(mrioc, event_reply); > } > > static struct mpi3mr_drv_cmd * > mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag, > Mpi3DefaultReply_t *def_reply) > { > + u16 idx; > switch (host_tag) { > case MPI3MR_HOSTTAG_INITCMDS: > return &mrioc->init_cmds; > @@ -177,6 +179,11 @@ mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag, > default: > break; > } > + if (host_tag >= MPI3MR_HOSTTAG_DEVRMCMD_MIN && > + host_tag <= MPI3MR_HOSTTAG_DEVRMCMD_MAX) { > + idx = host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; > + return &mrioc->dev_rmhs_cmds[idx]; > + } > > return NULL; > } > @@ -1925,6 +1932,12 @@ static int mpi3mr_alloc_reply_sense_bufs(struct mpi3mr_ioc *mrioc) > if (!mrioc->init_cmds.reply) > goto out_failed; > > + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { > + mrioc->dev_rmhs_cmds[i].reply = kzalloc(mrioc->facts.reply_sz, > + GFP_KERNEL); > + if (!mrioc->dev_rmhs_cmds[i].reply) > + goto out_failed; > + } The above allocation is already in 2/24, repeating it here seems wrong. Other than that : Reviewed-by: Tomas Henzl <thenzl@redhat.com> > > mrioc->num_reply_bufs = mrioc->facts.max_reqs + MPI3MR_NUM_EVT_REPLIES; > mrioc->reply_free_qsz = mrioc->num_reply_bufs + 1; > @@ -2135,6 +2148,162 @@ static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc) > return retval; > } > > +/** > + * mpi3mr_unmask_events - Unmask events in event mask bitmap > + * @mrioc: Adapter instance reference > + * @event: MPI event ID > + * > + * Un mask the specific event by resetting the event_mask > + * bitmap. > + * > + * Return: 0 on success, non-zero on failures. > + */ > +static void mpi3mr_unmask_events(struct mpi3mr_ioc *mrioc, u16 event) > +{ > + u32 desired_event; > + u8 word; > + > + if (event >= 128) > + return; > + > + desired_event = (1 << (event % 32)); > + word = event / 32; > + > + mrioc->event_masks[word] &= ~desired_event; > +} > + > +/** > + * mpi3mr_issue_event_notification - Send event notification > + * @mrioc: Adapter instance reference > + * > + * Issue event notification MPI request through admin queue and > + * wait for the completion of it or time out. > + * > + * Return: 0 on success, non-zero on failures. > + */ > +static int mpi3mr_issue_event_notification(struct mpi3mr_ioc *mrioc) > +{ > + Mpi3EventNotificationRequest_t evtnotify_req; > + int retval = 0; > + u8 i; > + > + memset(&evtnotify_req, 0, sizeof(evtnotify_req)); > + mutex_lock(&mrioc->init_cmds.mutex); > + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { > + retval = -1; > + ioc_err(mrioc, "Issue EvtNotify: Init command is in use\n"); > + mutex_unlock(&mrioc->init_cmds.mutex); > + goto out; > + } > + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; > + mrioc->init_cmds.is_waiting = 1; > + mrioc->init_cmds.callback = NULL; > + evtnotify_req.HostTag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); > + evtnotify_req.Function = MPI3_FUNCTION_EVENT_NOTIFICATION; > + for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) > + evtnotify_req.EventMasks[i] = > + cpu_to_le32(mrioc->event_masks[i]); > + init_completion(&mrioc->init_cmds.done); > + retval = mpi3mr_admin_request_post(mrioc, &evtnotify_req, > + sizeof(evtnotify_req), 1); > + if (retval) { > + ioc_err(mrioc, "Issue EvtNotify: Admin Post failed\n"); > + goto out_unlock; > + } > + wait_for_completion_timeout(&mrioc->init_cmds.done, > + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); > + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { > + ioc_err(mrioc, "Issue EvtNotify: command timed out\n"); > + mpi3mr_set_diagsave(mrioc); > + mpi3mr_issue_reset(mrioc, > + MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, > + MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT); > + mrioc->unrecoverable = 1; > + retval = -1; > + goto out_unlock; > + } > + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) > + != MPI3_IOCSTATUS_SUCCESS) { > + ioc_err(mrioc, > + "Issue EvtNotify: Failed IOCStatus(0x%04x) Loginfo(0x%08x)\n", > + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), > + mrioc->init_cmds.ioc_loginfo); > + retval = -1; > + goto out_unlock; > + } > + > +out_unlock: > + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; > + mutex_unlock(&mrioc->init_cmds.mutex); > +out: > + return retval; > +} > + > +/** > + * mpi3mr_send_event_ack - Send event acknowledgment > + * @event: MPI3 event ID > + * @event_ctx: Event context > + * > + * Send event acknowledgment through admin queue and wait for > + * it to complete. > + * > + * Return: 0 on success, non-zero on failures. > + */ > +int mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event, > + u32 event_ctx) > +{ > + Mpi3EventAckRequest_t evtack_req; > + int retval = 0; > + > + memset(&evtack_req, 0, sizeof(evtack_req)); > + mutex_lock(&mrioc->init_cmds.mutex); > + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { > + retval = -1; > + ioc_err(mrioc, "Send EvtAck: Init command is in use\n"); > + mutex_unlock(&mrioc->init_cmds.mutex); > + goto out; > + } > + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; > + mrioc->init_cmds.is_waiting = 1; > + mrioc->init_cmds.callback = NULL; > + evtack_req.HostTag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); > + evtack_req.Function = MPI3_FUNCTION_EVENT_ACK; > + evtack_req.Event = event; > + evtack_req.EventContext = cpu_to_le32(event_ctx); > + > + init_completion(&mrioc->init_cmds.done); > + retval = mpi3mr_admin_request_post(mrioc, &evtack_req, > + sizeof(evtack_req), 1); > + if (retval) { > + ioc_err(mrioc, "Send EvtAck: Admin Post failed\n"); > + goto out_unlock; > + } > + wait_for_completion_timeout(&mrioc->init_cmds.done, > + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); > + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { > + ioc_err(mrioc, "Issue EvtNotify: command timed out\n"); > + mpi3mr_soft_reset_handler(mrioc, > + MPI3MR_RESET_FROM_EVTACK_TIMEOUT, 1); > + retval = -1; > + goto out_unlock; > + } > + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) > + != MPI3_IOCSTATUS_SUCCESS) { > + ioc_err(mrioc, > + "Send EvtAck: Failed IOCStatus(0x%04x) Loginfo(0x%08x)\n", > + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), > + mrioc->init_cmds.ioc_loginfo); > + retval = -1; > + goto out_unlock; > + } > + > +out_unlock: > + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; > + mutex_unlock(&mrioc->init_cmds.mutex); > +out: > + return retval; > +} > + > > /** > * mpi3mr_alloc_chain_bufs - Allocate chain buffers > @@ -2416,7 +2585,7 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc) > enum mpi3mr_iocstate ioc_state; > u64 base_info; > u32 timeout; > - u32 ioc_status, ioc_config; > + u32 ioc_status, ioc_config, i; > Mpi3IOCFactsData_t facts_data; > > mrioc->change_count = 0; > @@ -2566,6 +2735,24 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc) > goto out_failed; > } > > + for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) > + mrioc->event_masks[i] = -1; > + > + mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_ADDED); > + mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_INFO_CHANGED); > + mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_STATUS_CHANGE); > + mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE); > + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST); > + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DISCOVERY); > + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR); > + > + retval = mpi3mr_issue_event_notification(mrioc); > + if (retval) { > + ioc_err(mrioc, "Failed to issue event notification %d\n", > + retval); > + goto out_failed; > + } > + > return retval; > > out_failed: > @@ -2648,6 +2835,11 @@ static void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc) > kfree(mrioc->chain_bitmap); > mrioc->chain_bitmap = NULL; > > + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { > + kfree(mrioc->dev_rmhs_cmds[i].reply); > + mrioc->dev_rmhs_cmds[i].reply = NULL; > + } > + > if (mrioc->chain_buf_pool) { > for (i = 0; i < mrioc->chain_buf_count; i++) { > if (mrioc->chain_sgl_list[i].addr) { > diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c > index 7b0d52481929..9b9230d1107a 100644 > --- a/drivers/scsi/mpi3mr/mpi3mr_os.c > +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c > @@ -125,6 +125,1281 @@ static void mpi3mr_clear_scmd_priv(struct mpi3mr_ioc *mrioc, > } > } > > +static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle, > + struct mpi3mr_drv_cmd *cmdparam, u8 iou_rc); > +static void mpi3mr_fwevt_worker(struct work_struct *work); > + > + > +/** > + * mpi3mr_fwevt_free - firmware event memory dealloctor > + * @r: k reference pointer of the firmware event > + * > + * Free firmware event memory when no reference. > + */ > +static void mpi3mr_fwevt_free(struct kref *r) > +{ > + kfree(container_of(r, struct mpi3mr_fwevt, ref_count)); > +} > + > +/** > + * mpi3mr_fwevt_get - k reference incrementor > + * @fwevt: Firmware event reference > + * > + * Increment firmware event reference count. > + */ > +static void mpi3mr_fwevt_get(struct mpi3mr_fwevt *fwevt) > +{ > + kref_get(&fwevt->ref_count); > +} > + > +/** > + * mpi3mr_fwevt_put - k reference decrementor > + * @fwevt: Firmware event reference > + * > + * Decrement firmware event reference count. > + */ > +static void mpi3mr_fwevt_put(struct mpi3mr_fwevt *fwevt) > +{ > + kref_put(&fwevt->ref_count, mpi3mr_fwevt_free); > +} > + > +/** > + * mpi3mr_alloc_fwevt - Allocate firmware event > + * @len: Length of firmware event data to allocate > + * > + * Allocate firmware event with required length and initialize > + * the reference counter. > + * > + * Return: firmware event reference. > + */ > +static struct mpi3mr_fwevt *mpi3mr_alloc_fwevt(int len) > +{ > + struct mpi3mr_fwevt *fwevt; > + > + fwevt = kzalloc(sizeof(*fwevt) + len, GFP_ATOMIC); > + if (!fwevt) > + return NULL; > + > + kref_init(&fwevt->ref_count); > + return fwevt; > +} > + > +/** > + * mpi3mr_fwevt_add_to_list - Add firmware event to the list > + * @mrioc: Adapter instance reference > + * @fwevt: Firmware event reference > + * > + * Add the given firmware event to the firmware event list. > + * > + * Return: Nothing. > + */ > +static void mpi3mr_fwevt_add_to_list(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_fwevt *fwevt) > +{ > + unsigned long flags; > + > + if (mrioc->fwevt_worker_thread == NULL) > + return; > + > + spin_lock_irqsave(&mrioc->fwevt_lock, flags); > + /* get fwevt reference count while adding it to fwevt_list */ > + mpi3mr_fwevt_get(fwevt); > + INIT_LIST_HEAD(&fwevt->list); > + list_add_tail(&fwevt->list, &mrioc->fwevt_list); > + INIT_WORK(&fwevt->work, mpi3mr_fwevt_worker); > + /* get fwevt reference count while enqueueing it to worker queue */ > + mpi3mr_fwevt_get(fwevt); > + queue_work(mrioc->fwevt_worker_thread, &fwevt->work); > + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); > +} > + > +/** > + * mpi3mr_fwevt_del_from_list - Delete firmware event from list > + * @mrioc: Adapter instance reference > + * @fwevt: Firmware event reference > + * > + * Delete the given firmware event from the firmware event list. > + * > + * Return: Nothing. > + */ > +static void mpi3mr_fwevt_del_from_list(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_fwevt *fwevt) > +{ > + unsigned long flags; > + > + spin_lock_irqsave(&mrioc->fwevt_lock, flags); > + if (!list_empty(&fwevt->list)) { > + list_del_init(&fwevt->list); > + /* > + * Put fwevt reference count after > + * removing it from fwevt_list > + */ > + mpi3mr_fwevt_put(fwevt); > + } > + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); > +} > + > +/** > + * mpi3mr_dequeue_fwevt - Dequeue firmware event from the list > + * @mrioc: Adapter instance reference > + * > + * Dequeue a firmware event from the firmware event list. > + * > + * Return: firmware event. > + */ > +static struct mpi3mr_fwevt *mpi3mr_dequeue_fwevt( > + struct mpi3mr_ioc *mrioc) > +{ > + unsigned long flags; > + struct mpi3mr_fwevt *fwevt = NULL; > + > + spin_lock_irqsave(&mrioc->fwevt_lock, flags); > + if (!list_empty(&mrioc->fwevt_list)) { > + fwevt = list_first_entry(&mrioc->fwevt_list, > + struct mpi3mr_fwevt, list); > + list_del_init(&fwevt->list); > + /* > + * Put fwevt reference count after > + * removing it from fwevt_list > + */ > + mpi3mr_fwevt_put(fwevt); > + } > + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); > + > + return fwevt; > +} > + > +/** > + * mpi3mr_cleanup_fwevt_list - Cleanup firmware event list > + * @mrioc: Adapter instance reference > + * > + * Flush all pending firmware events from the firmware event > + * list. > + * > + * Return: Nothing. > + */ > +void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc) > +{ > + struct mpi3mr_fwevt *fwevt = NULL; > + > + if ((list_empty(&mrioc->fwevt_list) && !mrioc->current_event) || > + !mrioc->fwevt_worker_thread) > + return; > + > + while ((fwevt = mpi3mr_dequeue_fwevt(mrioc)) || > + (fwevt = mrioc->current_event)) { > + /* > + * Wait on the fwevt to complete. If this returns 1, then > + * the event was never executed, and we need a put for the > + * reference the work had on the fwevt. > + * > + * If it did execute, we wait for it to finish, and the put will > + * happen from mpi3mr_process_fwevt() > + */ > + if (cancel_work_sync(&fwevt->work)) { > + /* > + * Put fwevt reference count after > + * dequeuing it from worker queue > + */ > + mpi3mr_fwevt_put(fwevt); > + /* > + * Put fwevt reference count to neutralize > + * kref_init increment > + */ > + mpi3mr_fwevt_put(fwevt); > + } > + } > +} > + > +/** > + * mpi3mr_alloc_tgtdev - target device allocator > + * > + * Allocate target device instance and initialize the reference > + * count > + * > + * Return: target device instance. > + */ > +static struct mpi3mr_tgt_dev *mpi3mr_alloc_tgtdev(void) > +{ > + struct mpi3mr_tgt_dev *tgtdev; > + > + tgtdev = kzalloc(sizeof(*tgtdev), GFP_ATOMIC); > + if (!tgtdev) > + return NULL; > + kref_init(&tgtdev->ref_count); > + return tgtdev; > +} > + > +/** > + * mpi3mr_tgtdev_add_to_list -Add tgtdevice to the list > + * @mrioc: Adapter instance reference > + * @tgtdev: Target device > + * > + * Add the target device to the target device list > + * > + * Return: Nothing. > + */ > +static void mpi3mr_tgtdev_add_to_list(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_tgt_dev *tgtdev) > +{ > + unsigned long flags; > + > + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); > + mpi3mr_tgtdev_get(tgtdev); > + INIT_LIST_HEAD(&tgtdev->list); > + list_add_tail(&tgtdev->list, &mrioc->tgtdev_list); > + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); > +} > + > +/** > + * mpi3mr_tgtdev_del_from_list -Delete tgtdevice from the list > + * @mrioc: Adapter instance reference > + * @tgtdev: Target device > + * > + * Remove the target device from the target device list > + * > + * Return: Nothing. > + */ > +static void mpi3mr_tgtdev_del_from_list(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_tgt_dev *tgtdev) > +{ > + unsigned long flags; > + > + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); > + if (!list_empty(&tgtdev->list)) { > + list_del_init(&tgtdev->list); > + mpi3mr_tgtdev_put(tgtdev); > + } > + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); > +} > + > +/** > + * __mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle > + * @mrioc: Adapter instance reference > + * @handle: Device handle > + * > + * Accessor to retrieve target device from the device handle. > + * Non Lock version > + * > + * Return: Target device reference. > + */ > +static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_handle( > + struct mpi3mr_ioc *mrioc, u16 handle) > +{ > + struct mpi3mr_tgt_dev *tgtdev; > + > + assert_spin_locked(&mrioc->tgtdev_lock); > + list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) > + if (tgtdev->dev_handle == handle) > + goto found_tgtdev; > + return NULL; > + > +found_tgtdev: > + mpi3mr_tgtdev_get(tgtdev); > + return tgtdev; > +} > + > +/** > + * mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle > + * @mrioc: Adapter instance reference > + * @handle: Device handle > + * > + * Accessor to retrieve target device from the device handle. > + * Lock version > + * > + * Return: Target device reference. > + */ > +struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle( > + struct mpi3mr_ioc *mrioc, u16 handle) > +{ > + struct mpi3mr_tgt_dev *tgtdev; > + unsigned long flags; > + > + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); > + tgtdev = __mpi3mr_get_tgtdev_by_handle(mrioc, handle); > + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); > + return tgtdev; > +} > + > +/** > + * __mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persist ID > + * @mrioc: Adapter instance reference > + * @persist_id: Persistent ID > + * > + * Accessor to retrieve target device from the Persistent ID. > + * Non Lock version > + * > + * Return: Target device reference. > + */ > +static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_perst_id( > + struct mpi3mr_ioc *mrioc, u16 persist_id) > +{ > + struct mpi3mr_tgt_dev *tgtdev; > + > + assert_spin_locked(&mrioc->tgtdev_lock); > + list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) > + if (tgtdev->perst_id == persist_id) > + goto found_tgtdev; > + return NULL; > + > +found_tgtdev: > + mpi3mr_tgtdev_get(tgtdev); > + return tgtdev; > +} > + > +/** > + * mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persistent ID > + * @mrioc: Adapter instance reference > + * @persist_id: Persistent ID > + * > + * Accessor to retrieve target device from the Persistent ID. > + * Lock version > + * > + * Return: Target device reference. > + */ > +struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_perst_id( > + struct mpi3mr_ioc *mrioc, u16 persist_id) > +{ > + struct mpi3mr_tgt_dev *tgtdev; > + unsigned long flags; > + > + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); > + tgtdev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, persist_id); > + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); > + return tgtdev; > +} > + > + > +/** > + * __mpi3mr_get_tgtdev_from_tgtpriv -Get tgtdev from tgt private > + * @mrioc: Adapter instance reference > + * @tgt_priv: Target private data > + * > + * Accessor to return target device from the target private > + * data. Non Lock version > + * > + * Return: Target device reference. > + */ > +static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_from_tgtpriv( > + struct mpi3mr_ioc *mrioc, struct mpi3mr_stgt_priv_data *tgt_priv) > +{ > + struct mpi3mr_tgt_dev *tgtdev; > + > + assert_spin_locked(&mrioc->tgtdev_lock); > + tgtdev = tgt_priv->tgt_dev; > + if (tgtdev) > + mpi3mr_tgtdev_get(tgtdev); > + return tgtdev; > +} > + > +/** > + * mpi3mr_remove_tgtdev_from_host - Remove dev from upper layers > + * @mrioc: Adapter instance reference > + * @tgtdev: Target device structure > + * > + * Checks whether the device is exposed to upper layers and if it > + * is then remove the device from upper layers by calling > + * scsi_remove_target(). > + * > + * Return: 0 on success, non zero on failure. > + */ > +static void mpi3mr_remove_tgtdev_from_host(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_tgt_dev *tgtdev) > +{ > + struct mpi3mr_stgt_priv_data *tgt_priv; > + > + > + ioc_info(mrioc, "%s :Removing handle(0x%04x), wwid(0x%016llx)\n", > + __func__, tgtdev->dev_handle, (unsigned long long) tgtdev->wwid); > + if (tgtdev->starget && tgtdev->starget->hostdata) { > + tgt_priv = tgtdev->starget->hostdata; > + tgt_priv->dev_handle = MPI3MR_INVALID_DEV_HANDLE; > + } > + > + if (tgtdev->starget) { > + scsi_remove_target(&tgtdev->starget->dev); > + tgtdev->host_exposed = 0; > + } > + ioc_info(mrioc, "%s :Removed handle(0x%04x), wwid(0x%016llx)\n", > + __func__, tgtdev->dev_handle, (unsigned long long) tgtdev->wwid); > +} > + > + > +/** > + * mpi3mr_report_tgtdev_to_host - Expose device to upper layers > + * @mrioc: Adapter instance reference > + * @perst_id: Persistent ID of the device > + * > + * Checks whether the device can be exposed to upper layers and > + * if it is not then expose the device to upper layers by > + * calling scsi_scan_target(). > + * > + * Return: 0 on success, non zero on failure. > + */ > +static int mpi3mr_report_tgtdev_to_host(struct mpi3mr_ioc *mrioc, > + u16 perst_id) > +{ > + int retval = 0; > + struct mpi3mr_tgt_dev *tgtdev; > + > + tgtdev = mpi3mr_get_tgtdev_by_perst_id(mrioc, perst_id); > + if (!tgtdev) { > + retval = -1; > + goto out; > + } > + if (tgtdev->is_hidden) { > + retval = -1; > + goto out; > + } > + if (!tgtdev->host_exposed && !mrioc->reset_in_progress) { > + tgtdev->host_exposed = 1; > + scsi_scan_target(&mrioc->shost->shost_gendev, 0, > + tgtdev->perst_id, > + SCAN_WILD_CARD, SCSI_SCAN_INITIAL); > + if (!tgtdev->starget) > + tgtdev->host_exposed = 0; > + } > +out: > + if (tgtdev) > + mpi3mr_tgtdev_put(tgtdev); > + > + return retval; > +} > + > +/** > + * mpi3mr_rfresh_tgtdevs - Refresh target device exposure > + * @mrioc: Adapter instance reference > + * > + * This is executed post controller reset to identify any > + * missing devices during reset and remove from the upper layers > + * or expose any newly detected device to the upper layers. > + * > + * Return: Nothing. > + */ > + > +void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc) > +{ > + struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next; > + > + list_for_each_entry_safe(tgtdev, tgtdev_next, &mrioc->tgtdev_list, > + list) { > + if ((tgtdev->dev_handle == MPI3MR_INVALID_DEV_HANDLE) && > + tgtdev->host_exposed) { > + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); > + mpi3mr_tgtdev_del_from_list(mrioc, tgtdev); > + mpi3mr_tgtdev_put(tgtdev); > + } > + } > + > + tgtdev = NULL; > + list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) { > + if ((tgtdev->dev_handle != MPI3MR_INVALID_DEV_HANDLE) && > + !tgtdev->is_hidden && !tgtdev->host_exposed) > + mpi3mr_report_tgtdev_to_host(mrioc, tgtdev->perst_id); > + } > +} > + > +/** > + * mpi3mr_update_tgtdev - DevStatusChange evt bottomhalf > + * @mrioc: Adapter instance reference > + * @tgtdev: Target device internal structure > + * @dev_pg0: New device page0 > + * > + * Update the information from the device page0 into the driver > + * cached target device structure. > + * > + * Return: Nothing. > + */ > +static void mpi3mr_update_tgtdev(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_tgt_dev *tgtdev, Mpi3DevicePage0_t *dev_pg0) > +{ > + u16 flags = 0; > + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; > + > + tgtdev->perst_id = le16_to_cpu(dev_pg0->PersistentID); > + tgtdev->dev_handle = le16_to_cpu(dev_pg0->DevHandle); > + tgtdev->dev_type = dev_pg0->DeviceForm; > + tgtdev->encl_handle = le16_to_cpu(dev_pg0->EnclosureHandle); > + tgtdev->parent_handle = le16_to_cpu(dev_pg0->ParentDevHandle); > + tgtdev->slot = le16_to_cpu(dev_pg0->Slot); > + tgtdev->q_depth = le16_to_cpu(dev_pg0->QueueDepth); > + tgtdev->wwid = le64_to_cpu(dev_pg0->WWID); > + > + flags = le16_to_cpu(dev_pg0->Flags); > + tgtdev->is_hidden = (flags & MPI3_DEVICE0_FLAGS_HIDDEN); > + > + if (tgtdev->starget && tgtdev->starget->hostdata) { > + scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *) > + tgtdev->starget->hostdata; > + scsi_tgt_priv_data->perst_id = tgtdev->perst_id; > + scsi_tgt_priv_data->dev_handle = tgtdev->dev_handle; > + scsi_tgt_priv_data->dev_type = tgtdev->dev_type; > + } > + > + switch (tgtdev->dev_type) { > + case MPI3_DEVICE_DEVFORM_SAS_SATA: > + { > + Mpi3Device0SasSataFormat_t *sasinf = > + &dev_pg0->DeviceSpecific.SasSataFormat; > + u16 dev_info = le16_to_cpu(sasinf->DeviceInfo); > + > + tgtdev->dev_spec.sas_sata_inf.dev_info = dev_info; > + tgtdev->dev_spec.sas_sata_inf.sas_address = > + le64_to_cpu(sasinf->SASAddress); > + if ((dev_info & MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK) != > + MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE) > + tgtdev->is_hidden = 1; > + else if (!(dev_info & (MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET | > + MPI3_SAS_DEVICE_INFO_SSP_TARGET))) > + tgtdev->is_hidden = 1; > + break; > + } > + case MPI3_DEVICE_DEVFORM_VD: > + { > + Mpi3Device0VdFormat_t *vdinf = > + &dev_pg0->DeviceSpecific.VdFormat; > + > + tgtdev->dev_spec.vol_inf.state = vdinf->VdState; > + if (vdinf->VdState == MPI3_DEVICE0_VD_STATE_OFFLINE) > + tgtdev->is_hidden = 1; > + break; > + } > + default: > + break; > + } > +} > + > +/** > + * mpi3mr_devstatuschg_evt_bh - DevStatusChange evt bottomhalf > + * @mrioc: Adapter instance reference > + * @dev_pg0: New device page0 > + * > + * Process Device Status Change event and based on device's new > + * information, either expose the device to the upper layers, or > + * remove the device from upper layers. > + * > + * Return: Nothing. > + */ > +static void mpi3mr_devstatuschg_evt_bh(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_fwevt *fwevt) > +{ > + u16 dev_handle = 0; > + u8 uhide = 0, delete = 0, cleanup = 0; > + struct mpi3mr_tgt_dev *tgtdev = NULL; > + Mpi3EventDataDeviceStatusChange_t *evtdata = > + (Mpi3EventDataDeviceStatusChange_t *)fwevt->event_data; > + > + > + dev_handle = le16_to_cpu(evtdata->DevHandle); > + ioc_info(mrioc, > + "%s :device status change: handle(0x%04x): reason code(0x%x)\n", > + __func__, dev_handle, evtdata->ReasonCode); > + switch (evtdata->ReasonCode) { > + case MPI3_EVENT_DEV_STAT_RC_HIDDEN: > + delete = 1; > + break; > + case MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN: > + uhide = 1; > + break; > + case MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING: > + delete = 1; > + cleanup = 1; > + break; > + default: > + ioc_info(mrioc, "%s :Unhandled reason code(0x%x)\n", __func__, > + evtdata->ReasonCode); > + break; > + } > + > + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle); > + if (!tgtdev) > + goto out; > + if (uhide) { > + tgtdev->is_hidden = 0; > + if (!tgtdev->host_exposed) > + mpi3mr_report_tgtdev_to_host(mrioc, tgtdev->perst_id); > + } > + if (tgtdev->starget && tgtdev->starget->hostdata) { > + if (delete) > + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); > + } > + if (cleanup) { > + mpi3mr_tgtdev_del_from_list(mrioc, tgtdev); > + mpi3mr_tgtdev_put(tgtdev); > + } > + > +out: > + if (tgtdev) > + mpi3mr_tgtdev_put(tgtdev); > + > +} > + > +/** > + * mpi3mr_devinfochg_evt_bh - DeviceInfoChange evt bottomhalf > + * @mrioc: Adapter instance reference > + * @dev_pg0: New device page0 > + * > + * Process Device Info Change event and based on device's new > + * information, either expose the device to the upper layers, or > + * remove the device from upper layers or update the details of > + * the device. > + * > + * Return: Nothing. > + */ > +static void mpi3mr_devinfochg_evt_bh(struct mpi3mr_ioc *mrioc, > + Mpi3DevicePage0_t *dev_pg0) > +{ > + struct mpi3mr_tgt_dev *tgtdev = NULL; > + u16 dev_handle = 0, perst_id = 0; > + > + perst_id = le16_to_cpu(dev_pg0->PersistentID); > + dev_handle = le16_to_cpu(dev_pg0->DevHandle); > + ioc_info(mrioc, > + "%s :Device info change: handle(0x%04x): persist_id(0x%x)\n", > + __func__, dev_handle, perst_id); > + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle); > + if (!tgtdev) > + goto out; > + mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0); > + if (!tgtdev->is_hidden && !tgtdev->host_exposed) > + mpi3mr_report_tgtdev_to_host(mrioc, perst_id); > + if (tgtdev->is_hidden && tgtdev->host_exposed) > + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); > +out: > + if (tgtdev) > + mpi3mr_tgtdev_put(tgtdev); > + > +} > + > +/** > + * mpi3mr_sastopochg_evt_bh - SASTopologyChange evt bottomhalf > + * @mrioc: Adapter instance reference > + * @fwevt: Firmware event reference > + * > + * Prints information about the SAS topology change event and > + * for "not responding" event code, removes the device from the > + * upper layers. > + * > + * Return: Nothing. > + */ > +static void mpi3mr_sastopochg_evt_bh(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_fwevt *fwevt) > +{ > + Mpi3EventDataSasTopologyChangeList_t *event_data = > + (Mpi3EventDataSasTopologyChangeList_t *)fwevt->event_data; > + int i; > + u16 handle; > + u8 reason_code; > + struct mpi3mr_tgt_dev *tgtdev = NULL; > + > + for (i = 0; i < event_data->NumEntries; i++) { > + handle = le16_to_cpu(event_data->PhyEntry[i].AttachedDevHandle); > + if (!handle) > + continue; > + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle); > + if (!tgtdev) > + continue; > + > + reason_code = event_data->PhyEntry[i].Status & > + MPI3_EVENT_SAS_TOPO_PHY_RC_MASK; > + > + switch (reason_code) { > + case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING: > + if (tgtdev->host_exposed) > + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); > + mpi3mr_tgtdev_del_from_list(mrioc, tgtdev); > + mpi3mr_tgtdev_put(tgtdev); > + break; > + default: > + break; > + } > + if (tgtdev) > + mpi3mr_tgtdev_put(tgtdev); > + } > +} > + > +/** > + * mpi3mr_fwevt_bh - Firmware event bottomhalf handler > + * @mrioc: Adapter instance reference > + * @fwevt: Firmware event reference > + * > + * Identifies the firmware event and calls corresponding bottomg > + * half handler and sends event acknowledgment if required. > + * > + * Return: Nothing. > + */ > +static void mpi3mr_fwevt_bh(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_fwevt *fwevt) > +{ > + mrioc->current_event = fwevt; > + mpi3mr_fwevt_del_from_list(mrioc, fwevt); > + > + if (mrioc->stop_drv_processing) > + goto out; > + > + if (!fwevt->process_evt) > + goto evt_ack; > + > + switch (fwevt->event_id) { > + case MPI3_EVENT_DEVICE_ADDED: > + { > + Mpi3DevicePage0_t *dev_pg0 = > + (Mpi3DevicePage0_t *) fwevt->event_data; > + mpi3mr_report_tgtdev_to_host(mrioc, > + le16_to_cpu(dev_pg0->PersistentID)); > + break; > + } > + case MPI3_EVENT_DEVICE_INFO_CHANGED: > + { > + mpi3mr_devinfochg_evt_bh(mrioc, > + (Mpi3DevicePage0_t *) fwevt->event_data); > + break; > + } > + case MPI3_EVENT_DEVICE_STATUS_CHANGE: > + { > + mpi3mr_devstatuschg_evt_bh(mrioc, fwevt); > + break; > + } > + case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST: > + { > + mpi3mr_sastopochg_evt_bh(mrioc, fwevt); > + break; > + } > + default: > + break; > + } > + > +evt_ack: > + if (fwevt->send_ack) > + mpi3mr_send_event_ack(mrioc, fwevt->event_id, > + fwevt->evt_ctx); > +out: > + /* Put fwevt reference count to neutralize kref_init increment */ > + mpi3mr_fwevt_put(fwevt); > + mrioc->current_event = NULL; > + > +} > + > +/** > + * mpi3mr_fwevt_worker - Firmware event worker > + * @work: Work struct containing firmware event > + * > + * Extracts the firmware event and calls mpi3mr_fwevt_bh. > + * > + * Return: Nothing. > + */ > +static void mpi3mr_fwevt_worker(struct work_struct *work) > +{ > + struct mpi3mr_fwevt *fwevt = container_of(work, struct mpi3mr_fwevt, > + work); > + mpi3mr_fwevt_bh(fwevt->mrioc, fwevt); > + /* > + * Put fwevt reference count after > + * dequeuing it from worker queue > + */ > + mpi3mr_fwevt_put(fwevt); > +} > + > + > +/** > + * mpi3mr_create_tgtdev - Create and add a target device > + * @mrioc: Adapter instance reference > + * @dev_pg0: Device Page 0 data > + * > + * If the device specified by the device page 0 data is not > + * present in the driver's internal list, allocate the memory > + * for the device, populate the data and add to the list, else > + * update the device data. The key is persistent ID. > + * > + * Return: 0 on success, -ENOMEM on memory allocation failure > + */ > +static int mpi3mr_create_tgtdev(struct mpi3mr_ioc *mrioc, > + Mpi3DevicePage0_t *dev_pg0) > +{ > + int retval = 0; > + struct mpi3mr_tgt_dev *tgtdev = NULL; > + u16 perst_id = 0; > + > + perst_id = le16_to_cpu(dev_pg0->PersistentID); > + tgtdev = mpi3mr_get_tgtdev_by_perst_id(mrioc, perst_id); > + if (tgtdev) { > + mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0); > + mpi3mr_tgtdev_put(tgtdev); > + } else { > + tgtdev = mpi3mr_alloc_tgtdev(); > + if (!tgtdev) > + return -ENOMEM; > + mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0); > + mpi3mr_tgtdev_add_to_list(mrioc, tgtdev); > + } > + > + return retval; > +} > + > +/** > + * mpi3mr_flush_delayed_rmhs_list - Flush pending commands > + * @mrioc: Adapter instance reference > + * @cmdparam: Internal command tracker > + * > + * Flush pending commands in the delayed removal handshake list > + * due to a controller reset or driver removal as a cleanup. > + * > + * Return: Nothing > + */ > +void mpi3mr_flush_delayed_rmhs_list(struct mpi3mr_ioc *mrioc) > +{ > + struct delayed_dev_rmhs_node *_rmhs_node; > + > + while (!list_empty(&mrioc->delayed_rmhs_list)) { > + _rmhs_node = list_entry(mrioc->delayed_rmhs_list.next, > + struct delayed_dev_rmhs_node, list); > + list_del(&_rmhs_node->list); > + kfree(_rmhs_node); > + } > +} > + > +/** > + * mpi3mr_dev_rmhs_complete_iou - Device removal IOUC completion > + * @mrioc: Adapter instance reference > + * @cmdparam: Internal command tracker > + * > + * Issues a target reset TM to the firmware from the device > + * removal TM pend list or retry the removal handshake sequence > + * based on the IOU control request IOC status. > + * > + * Return: Nothing > + */ > +static void mpi3mr_dev_rmhs_complete_iou(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_drv_cmd *drv_cmd) > +{ > + u16 cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; > + struct delayed_dev_rmhs_node *delayed_dev_rmhs = NULL; > + > + ioc_info(mrioc, > + "%s :dev_rmhs_iouctrl_complete:handle(0x%04x), ioc_status(0x%04x), loginfo(0x%08x)\n", > + __func__, drv_cmd->dev_handle, drv_cmd->ioc_status, > + drv_cmd->ioc_loginfo); > + if (drv_cmd->ioc_status != MPI3_IOCSTATUS_SUCCESS) { > + if (drv_cmd->retry_count < MPI3MR_DEV_RMHS_RETRY_COUNT) { > + drv_cmd->retry_count++; > + ioc_info(mrioc, > + "%s :dev_rmhs_iouctrl_complete: handle(0x%04x)retrying handshake retry=%d\n", > + __func__, drv_cmd->dev_handle, > + drv_cmd->retry_count); > + mpi3mr_dev_rmhs_send_tm(mrioc, drv_cmd->dev_handle, > + drv_cmd, drv_cmd->iou_rc); > + return; > + } > + ioc_err(mrioc, > + "%s :dev removal handshake failed after all retries: handle(0x%04x)\n", > + __func__, drv_cmd->dev_handle); > + } else { > + ioc_info(mrioc, > + "%s :dev removal handshake completed successfully: handle(0x%04x)\n", > + __func__, drv_cmd->dev_handle); > + clear_bit(drv_cmd->dev_handle, mrioc->removepend_bitmap); > + } > + > + if (!list_empty(&mrioc->delayed_rmhs_list)) { > + delayed_dev_rmhs = list_entry(mrioc->delayed_rmhs_list.next, > + struct delayed_dev_rmhs_node, list); > + drv_cmd->dev_handle = delayed_dev_rmhs->handle; > + drv_cmd->retry_count = 0; > + drv_cmd->iou_rc = delayed_dev_rmhs->iou_rc; > + ioc_info(mrioc, > + "%s :dev_rmhs_iouctrl_complete: processing delayed TM: handle(0x%04x)\n", > + __func__, drv_cmd->dev_handle); > + mpi3mr_dev_rmhs_send_tm(mrioc, drv_cmd->dev_handle, drv_cmd, > + drv_cmd->iou_rc); > + list_del(&delayed_dev_rmhs->list); > + kfree(delayed_dev_rmhs); > + return; > + } > + drv_cmd->state = MPI3MR_CMD_NOTUSED; > + drv_cmd->callback = NULL; > + drv_cmd->retry_count = 0; > + drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE; > + clear_bit(cmd_idx, mrioc->devrem_bitmap); > +} > + > +/** > + * mpi3mr_dev_rmhs_complete_tm - Device removal TM completion > + * @mrioc: Adapter instance reference > + * @cmdparam: Internal command tracker > + * > + * Issues a target reset TM to the firmware from the device > + * removal TM pend list or issue IO Unit control request as > + * part of device removal or hidden acknowledgment handshake. > + * > + * Return: Nothing > + */ > +static void mpi3mr_dev_rmhs_complete_tm(struct mpi3mr_ioc *mrioc, > + struct mpi3mr_drv_cmd *drv_cmd) > +{ > + Mpi3IoUnitControlRequest_t iou_ctrl; > + u16 cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; > + Mpi3SCSITaskMgmtReply_t *tm_reply = NULL; > + int retval; > + > + if (drv_cmd->state & MPI3MR_CMD_REPLY_VALID) > + tm_reply = (Mpi3SCSITaskMgmtReply_t *)drv_cmd->reply; > + > + if (tm_reply) > + pr_info(IOCNAME > + "dev_rmhs_tr_complete:handle(0x%04x), ioc_status(0x%04x), loginfo(0x%08x), term_count(%d)\n", > + mrioc->name, drv_cmd->dev_handle, drv_cmd->ioc_status, > + drv_cmd->ioc_loginfo, > + le32_to_cpu(tm_reply->TerminationCount)); > + > + pr_info(IOCNAME "Issuing IOU CTL: handle(0x%04x) dev_rmhs idx(%d)\n", > + mrioc->name, drv_cmd->dev_handle, cmd_idx); > + > + memset(&iou_ctrl, 0, sizeof(iou_ctrl)); > + > + drv_cmd->state = MPI3MR_CMD_PENDING; > + drv_cmd->is_waiting = 0; > + drv_cmd->callback = mpi3mr_dev_rmhs_complete_iou; > + iou_ctrl.Operation = drv_cmd->iou_rc; > + iou_ctrl.Param16[0] = cpu_to_le16(drv_cmd->dev_handle); > + iou_ctrl.HostTag = cpu_to_le16(drv_cmd->host_tag); > + iou_ctrl.Function = MPI3_FUNCTION_IO_UNIT_CONTROL; > + > + retval = mpi3mr_admin_request_post(mrioc, &iou_ctrl, sizeof(iou_ctrl), > + 1); > + if (retval) { > + pr_err(IOCNAME "Issue DevRmHsTMIOUCTL: Admin post failed\n", > + mrioc->name); > + goto out_failed; > + } > + > + return; > +out_failed: > + drv_cmd->state = MPI3MR_CMD_NOTUSED; > + drv_cmd->callback = NULL; > + drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE; > + drv_cmd->retry_count = 0; > + clear_bit(cmd_idx, mrioc->devrem_bitmap); > +} > + > +/** > + * mpi3mr_dev_rmhs_send_tm - Issue TM for device removal > + * @mrioc: Adapter instance reference > + * @handle: Device handle > + * @cmdparam: Internal command tracker > + * @iou_rc: IO Unit reason code > + * > + * Issues a target reset TM to the firmware or add it to a pend > + * list as part of device removal or hidden acknowledgment > + * handshake. > + * > + * Return: Nothing > + */ > +static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle, > + struct mpi3mr_drv_cmd *cmdparam, u8 iou_rc) > +{ > + Mpi3SCSITaskMgmtRequest_t tm_req; > + int retval = 0; > + u16 cmd_idx = MPI3MR_NUM_DEVRMCMD; > + u8 retrycount = 5; > + struct mpi3mr_drv_cmd *drv_cmd = cmdparam; > + struct delayed_dev_rmhs_node *delayed_dev_rmhs = NULL; > + > + if (drv_cmd) > + goto issue_cmd; > + do { > + cmd_idx = find_first_zero_bit(mrioc->devrem_bitmap, > + MPI3MR_NUM_DEVRMCMD); > + if (cmd_idx < MPI3MR_NUM_DEVRMCMD) { > + if (!test_and_set_bit(cmd_idx, mrioc->devrem_bitmap)) > + break; > + cmd_idx = MPI3MR_NUM_DEVRMCMD; > + } > + } while (retrycount--); > + > + if (cmd_idx >= MPI3MR_NUM_DEVRMCMD) { > + delayed_dev_rmhs = kzalloc(sizeof(*delayed_dev_rmhs), > + GFP_ATOMIC); > + if (!delayed_dev_rmhs) > + return; > + INIT_LIST_HEAD(&delayed_dev_rmhs->list); > + delayed_dev_rmhs->handle = handle; > + delayed_dev_rmhs->iou_rc = iou_rc; > + list_add_tail(&delayed_dev_rmhs->list, > + &mrioc->delayed_rmhs_list); > + ioc_info(mrioc, "%s :DevRmHs: tr:handle(0x%04x) is postponed\n", > + __func__, handle); > + return; > + } > + drv_cmd = &mrioc->dev_rmhs_cmds[cmd_idx]; > + > +issue_cmd: > + cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; > + ioc_info(mrioc, > + "%s :Issuing TR TM: for devhandle 0x%04x with dev_rmhs %d\n", > + __func__, handle, cmd_idx); > + > + memset(&tm_req, 0, sizeof(tm_req)); > + if (drv_cmd->state & MPI3MR_CMD_PENDING) { > + ioc_err(mrioc, "%s :Issue TM: Command is in use\n", __func__); > + goto out; > + } > + drv_cmd->state = MPI3MR_CMD_PENDING; > + drv_cmd->is_waiting = 0; > + drv_cmd->callback = mpi3mr_dev_rmhs_complete_tm; > + drv_cmd->dev_handle = handle; > + drv_cmd->iou_rc = iou_rc; > + tm_req.DevHandle = cpu_to_le16(handle); > + tm_req.TaskType = MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET; > + tm_req.HostTag = cpu_to_le16(drv_cmd->host_tag); > + tm_req.TaskHostTag = cpu_to_le16(MPI3MR_HOSTTAG_INVALID); > + tm_req.Function = MPI3_FUNCTION_SCSI_TASK_MGMT; > + > + set_bit(handle, mrioc->removepend_bitmap); > + retval = mpi3mr_admin_request_post(mrioc, &tm_req, sizeof(tm_req), 1); > + if (retval) { > + ioc_err(mrioc, "%s :Issue DevRmHsTM: Admin Post failed\n", > + __func__); > + goto out_failed; > + } > +out: > + return; > +out_failed: > + drv_cmd->state = MPI3MR_CMD_NOTUSED; > + drv_cmd->callback = NULL; > + drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE; > + drv_cmd->retry_count = 0; > + clear_bit(cmd_idx, mrioc->devrem_bitmap); > +} > + > +/** > + * mpi3mr_sastopochg_evt_th - SASTopologyChange evt tophalf > + * @mrioc: Adapter instance reference > + * @event_reply: Event data > + * > + * Checks for the reason code and based on that either block I/O > + * to device, or unblock I/O to the device, or start the device > + * removal handshake with reason as remove with the firmware for > + * SAS/SATA devices. > + * > + * Return: Nothing > + */ > +static void mpi3mr_sastopochg_evt_th(struct mpi3mr_ioc *mrioc, > + Mpi3EventNotificationReply_t *event_reply) > +{ > + Mpi3EventDataSasTopologyChangeList_t *topo_evt = > + (Mpi3EventDataSasTopologyChangeList_t *)event_reply->EventData; > + int i; > + u16 handle; > + u8 reason_code; > + struct mpi3mr_tgt_dev *tgtdev = NULL; > + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL; > + > + for (i = 0; i < topo_evt->NumEntries; i++) { > + handle = le16_to_cpu(topo_evt->PhyEntry[i].AttachedDevHandle); > + if (!handle) > + continue; > + reason_code = topo_evt->PhyEntry[i].Status & > + MPI3_EVENT_SAS_TOPO_PHY_RC_MASK; > + scsi_tgt_priv_data = NULL; > + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle); > + if (tgtdev && tgtdev->starget && tgtdev->starget->hostdata) > + scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *) > + tgtdev->starget->hostdata; > + switch (reason_code) { > + case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING: > + if (scsi_tgt_priv_data) { > + scsi_tgt_priv_data->dev_removed = 1; > + scsi_tgt_priv_data->dev_removedelay = 0; > + atomic_set(&scsi_tgt_priv_data->block_io, 0); > + } > + mpi3mr_dev_rmhs_send_tm(mrioc, handle, NULL, > + MPI3_CTRL_OP_REMOVE_DEVICE); > + break; > + case MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING: > + if (scsi_tgt_priv_data) { > + scsi_tgt_priv_data->dev_removedelay = 1; > + atomic_inc(&scsi_tgt_priv_data->block_io); > + } > + break; > + case MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING: > + if (scsi_tgt_priv_data && > + scsi_tgt_priv_data->dev_removedelay) { > + scsi_tgt_priv_data->dev_removedelay = 0; > + atomic_dec_if_positive > + (&scsi_tgt_priv_data->block_io); > + } > + case MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED: > + default: > + break; > + } > + if (tgtdev) > + mpi3mr_tgtdev_put(tgtdev); > + } > + > +} > + > +/** > + * mpi3mr_devstatuschg_evt_th - DeviceStatusChange evt tophalf > + * @mrioc: Adapter instance reference > + * @event_reply: Event data > + * > + * Checks for the reason code and based on that either block I/O > + * to device, or unblock I/O to the device, or start the device > + * removal handshake with reason as remove/hide acknowledgment > + * with the firmware. > + * > + * Return: Nothing > + */ > +static void mpi3mr_devstatuschg_evt_th(struct mpi3mr_ioc *mrioc, > + Mpi3EventNotificationReply_t *event_reply) > +{ > + u16 dev_handle = 0; > + u8 ublock = 0, block = 0, hide = 0, delete = 0, remove = 0; > + struct mpi3mr_tgt_dev *tgtdev = NULL; > + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL; > + Mpi3EventDataDeviceStatusChange_t *evtdata = > + (Mpi3EventDataDeviceStatusChange_t *) event_reply->EventData; > + > + if (mrioc->stop_drv_processing) > + goto out; > + > + dev_handle = le16_to_cpu(evtdata->DevHandle); > + > + switch (evtdata->ReasonCode) { > + case MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT: > + case MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT: > + block = 1; > + break; > + case MPI3_EVENT_DEV_STAT_RC_HIDDEN: > + delete = 1; > + hide = 1; > + break; > + case MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING: > + delete = 1; > + remove = 1; > + break; > + case MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP: > + case MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP: > + ublock = 1; > + break; > + default: > + break; > + } > + > + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle); > + if (!tgtdev) > + goto out; > + if (hide) > + tgtdev->is_hidden = hide; > + if (tgtdev->starget && tgtdev->starget->hostdata) { > + scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *) > + tgtdev->starget->hostdata; > + if (block) > + atomic_inc(&scsi_tgt_priv_data->block_io); > + if (delete) > + scsi_tgt_priv_data->dev_removed = 1; > + if (ublock) > + atomic_dec_if_positive(&scsi_tgt_priv_data->block_io); > + } > + if (remove) > + mpi3mr_dev_rmhs_send_tm(mrioc, dev_handle, NULL, > + MPI3_CTRL_OP_REMOVE_DEVICE); > + if (hide) > + mpi3mr_dev_rmhs_send_tm(mrioc, dev_handle, NULL, > + MPI3_CTRL_OP_HIDDEN_ACK); > + > +out: > + if (tgtdev) > + mpi3mr_tgtdev_put(tgtdev); > + > +} > + > +/** > + * mpi3mr_os_handle_events - Firmware event handler > + * @mrioc: Adapter instance reference > + * @event_reply: Event data > + * > + * Identify whteher the event has to handled and acknowledged > + * and either process the event in the tophalf and/or schedule a > + * bottom half through mpi3mr_fwevt_worker. > + * > + * Return: Nothing > + */ > +void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc, > + Mpi3EventNotificationReply_t *event_reply) > +{ > + u16 evt_type, sz; > + struct mpi3mr_fwevt *fwevt = NULL; > + bool ack_req = 0, process_evt_bh = 0; > + > + if (mrioc->stop_drv_processing) > + return; > + > + if ((event_reply->MsgFlags & MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK) > + == MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED) > + ack_req = 1; > + > + evt_type = event_reply->Event; > + > + switch (evt_type) { > + case MPI3_EVENT_DEVICE_ADDED: > + { > + Mpi3DevicePage0_t *dev_pg0 = > + (Mpi3DevicePage0_t *) event_reply->EventData; > + if (mpi3mr_create_tgtdev(mrioc, dev_pg0)) > + ioc_err(mrioc, > + "%s :Failed to add device in the device add event\n", > + __func__); > + else > + process_evt_bh = 1; > + break; > + } > + case MPI3_EVENT_DEVICE_STATUS_CHANGE: > + { > + process_evt_bh = 1; > + mpi3mr_devstatuschg_evt_th(mrioc, event_reply); > + break; > + } > + case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST: > + { > + process_evt_bh = 1; > + mpi3mr_sastopochg_evt_th(mrioc, event_reply); > + break; > + } > + case MPI3_EVENT_DEVICE_INFO_CHANGED: > + { > + process_evt_bh = 1; > + break; > + } > + case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE: > + case MPI3_EVENT_SAS_DISCOVERY: > + case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR: > + break; > + default: > + ioc_info(mrioc, "%s :Event 0x%02x is not handled\n", > + __func__, evt_type); > + break; > + } > + if (process_evt_bh || ack_req) { > + sz = event_reply->EventDataLength * 4; > + fwevt = mpi3mr_alloc_fwevt(sz); > + if (!fwevt) { > + ioc_info(mrioc, "%s :failure at %s:%d/%s()!\n", > + __func__, __FILE__, __LINE__, __func__); > + return; > + } > + > + memcpy(fwevt->event_data, event_reply->EventData, sz); > + fwevt->mrioc = mrioc; > + fwevt->event_id = evt_type; > + fwevt->send_ack = ack_req; > + fwevt->process_evt = process_evt_bh; > + fwevt->evt_ctx = le32_to_cpu(event_reply->EventContext); > + mpi3mr_fwevt_add_to_list(mrioc, fwevt); > + } > + > +} > + > /** > * mpi3mr_process_op_reply_desc - reply descriptor handler > * @mrioc: Adapter instance reference > @@ -587,6 +1862,33 @@ static int mpi3mr_scan_finished(struct Scsi_Host *shost, > */ > static void mpi3mr_slave_destroy(struct scsi_device *sdev) > { > + struct Scsi_Host *shost; > + struct mpi3mr_ioc *mrioc; > + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; > + struct mpi3mr_tgt_dev *tgt_dev; > + unsigned long flags; > + struct scsi_target *starget; > + > + if (!sdev->hostdata) > + return; > + > + starget = scsi_target(sdev); > + shost = dev_to_shost(&starget->dev); > + mrioc = shost_priv(shost); > + scsi_tgt_priv_data = starget->hostdata; > + > + scsi_tgt_priv_data->num_luns--; > + > + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); > + tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id); > + if (tgt_dev && (!scsi_tgt_priv_data->num_luns)) > + tgt_dev->starget = NULL; > + if (tgt_dev) > + mpi3mr_tgtdev_put(tgt_dev); > + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); > + > + kfree(sdev->hostdata); > + sdev->hostdata = NULL; > } > > /** > @@ -599,6 +1901,35 @@ static void mpi3mr_slave_destroy(struct scsi_device *sdev) > */ > static void mpi3mr_target_destroy(struct scsi_target *starget) > { > + struct Scsi_Host *shost; > + struct mpi3mr_ioc *mrioc; > + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; > + struct mpi3mr_tgt_dev *tgt_dev; > + unsigned long flags; > + > + if (!starget->hostdata) > + return; > + > + shost = dev_to_shost(&starget->dev); > + mrioc = shost_priv(shost); > + scsi_tgt_priv_data = starget->hostdata; > + > + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); > + tgt_dev = __mpi3mr_get_tgtdev_from_tgtpriv(mrioc, scsi_tgt_priv_data); > + if (tgt_dev && (tgt_dev->starget == starget) && > + (tgt_dev->perst_id == starget->id)) > + tgt_dev->starget = NULL; > + if (tgt_dev) { > + scsi_tgt_priv_data->tgt_dev = NULL; > + scsi_tgt_priv_data->perst_id = 0; > + mpi3mr_tgtdev_put(tgt_dev); > + mpi3mr_tgtdev_put(tgt_dev); > + } > + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); > + > + kfree(starget->hostdata); > + starget->hostdata = NULL; > + > } > > /** > @@ -612,7 +1943,25 @@ static void mpi3mr_target_destroy(struct scsi_target *starget) > */ > static int mpi3mr_slave_configure(struct scsi_device *sdev) > { > + struct scsi_target *starget; > + struct Scsi_Host *shost; > + struct mpi3mr_ioc *mrioc; > + struct mpi3mr_tgt_dev *tgt_dev; > + unsigned long flags; > int retval = 0; > + > + starget = scsi_target(sdev); > + shost = dev_to_shost(&starget->dev); > + mrioc = shost_priv(shost); > + > + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); > + tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id); > + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); > + if (!tgt_dev) > + return retval; > + > + mpi3mr_tgtdev_put(tgt_dev); > + > return retval; > } > > @@ -626,7 +1975,37 @@ static int mpi3mr_slave_configure(struct scsi_device *sdev) > */ > static int mpi3mr_slave_alloc(struct scsi_device *sdev) > { > + struct Scsi_Host *shost; > + struct mpi3mr_ioc *mrioc; > + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; > + struct mpi3mr_tgt_dev *tgt_dev; > + struct mpi3mr_sdev_priv_data *scsi_dev_priv_data; > + unsigned long flags; > + struct scsi_target *starget; > int retval = 0; > + > + starget = scsi_target(sdev); > + shost = dev_to_shost(&starget->dev); > + mrioc = shost_priv(shost); > + scsi_tgt_priv_data = starget->hostdata; > + > + scsi_dev_priv_data = kzalloc(sizeof(*scsi_dev_priv_data), GFP_KERNEL); > + if (!scsi_dev_priv_data) > + return -ENOMEM; > + > + scsi_dev_priv_data->lun_id = sdev->lun; > + scsi_dev_priv_data->tgt_priv_data = scsi_tgt_priv_data; > + sdev->hostdata = scsi_dev_priv_data; > + > + scsi_tgt_priv_data->num_luns++; > + > + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); > + tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id); > + if (tgt_dev && (tgt_dev->starget == NULL)) > + tgt_dev->starget = starget; > + if (tgt_dev) > + mpi3mr_tgtdev_put(tgt_dev); > + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); > return retval; > } > > @@ -640,7 +2019,33 @@ static int mpi3mr_slave_alloc(struct scsi_device *sdev) > */ > static int mpi3mr_target_alloc(struct scsi_target *starget) > { > + struct Scsi_Host *shost = dev_to_shost(&starget->dev); > + struct mpi3mr_ioc *mrioc = shost_priv(shost); > + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; > + struct mpi3mr_tgt_dev *tgt_dev; > + unsigned long flags; > int retval = -ENODEV; > + > + scsi_tgt_priv_data = kzalloc(sizeof(*scsi_tgt_priv_data), GFP_KERNEL); > + if (!scsi_tgt_priv_data) > + return -ENOMEM; > + > + starget->hostdata = scsi_tgt_priv_data; > + scsi_tgt_priv_data->starget = starget; > + scsi_tgt_priv_data->dev_handle = MPI3MR_INVALID_DEV_HANDLE; > + > + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); > + tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id); > + if (tgt_dev && !tgt_dev->is_hidden) { > + scsi_tgt_priv_data->dev_handle = tgt_dev->dev_handle; > + scsi_tgt_priv_data->perst_id = tgt_dev->perst_id; > + scsi_tgt_priv_data->dev_type = tgt_dev->dev_type; > + scsi_tgt_priv_data->tgt_dev = tgt_dev; > + tgt_dev->starget = starget; > + atomic_set(&scsi_tgt_priv_data->block_io, 0); > + retval = 0; > + } > + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); > return retval; > } > > @@ -836,7 +2241,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) > { > struct mpi3mr_ioc *mrioc = NULL; > struct Scsi_Host *shost = NULL; > - int retval = 0; > + int retval = 0, i; > > shost = scsi_host_alloc(&mpi3mr_driver_template, > sizeof(struct mpi3mr_ioc)); > @@ -857,11 +2262,21 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) > spin_lock_init(&mrioc->admin_req_lock); > spin_lock_init(&mrioc->reply_free_queue_lock); > spin_lock_init(&mrioc->sbq_lock); > + spin_lock_init(&mrioc->fwevt_lock); > + spin_lock_init(&mrioc->tgtdev_lock); > spin_lock_init(&mrioc->watchdog_lock); > spin_lock_init(&mrioc->chain_buf_lock); > > + INIT_LIST_HEAD(&mrioc->fwevt_list); > + INIT_LIST_HEAD(&mrioc->tgtdev_list); > + INIT_LIST_HEAD(&mrioc->delayed_rmhs_list); > + > mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS); > > + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) > + mpi3mr_init_drv_cmd(&mrioc->dev_rmhs_cmds[i], > + MPI3MR_HOSTTAG_DEVRMCMD_MIN + i); > + > if (pdev->revision) > mrioc->enable_segqueue = true; > > @@ -877,6 +2292,17 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) > shost->max_channel = 1; > shost->max_id = 0xFFFFFFFF; > > + snprintf(mrioc->fwevt_worker_name, sizeof(mrioc->fwevt_worker_name), > + "%s%d_fwevt_wrkr", mrioc->driver_name, mrioc->id); > + mrioc->fwevt_worker_thread = alloc_ordered_workqueue( > + mrioc->fwevt_worker_name, WQ_MEM_RECLAIM); > + if (!mrioc->fwevt_worker_thread) { > + ioc_err(mrioc, "failure at %s:%d/%s()!\n", > + __FILE__, __LINE__, __func__); > + retval = -ENODEV; > + goto out_fwevtthread_failed; > + } > + > mrioc->is_driver_loading = 1; > if (mpi3mr_init_ioc(mrioc)) { > ioc_err(mrioc, "failure at %s:%d/%s()!\n", > @@ -903,6 +2329,8 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) > addhost_failed: > mpi3mr_cleanup_ioc(mrioc); > out_iocinit_failed: > + destroy_workqueue(mrioc->fwevt_worker_thread); > +out_fwevtthread_failed: > spin_lock(&mrioc_list_lock); > list_del(&mrioc->list); > spin_unlock(&mrioc_list_lock); > @@ -924,14 +2352,30 @@ static void mpi3mr_remove(struct pci_dev *pdev) > { > struct Scsi_Host *shost = pci_get_drvdata(pdev); > struct mpi3mr_ioc *mrioc; > + struct workqueue_struct *wq; > + unsigned long flags; > + struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next; > > mrioc = shost_priv(shost); > while (mrioc->reset_in_progress || mrioc->is_driver_loading) > ssleep(1); > > mrioc->stop_drv_processing = 1; > + mpi3mr_cleanup_fwevt_list(mrioc); > + spin_lock_irqsave(&mrioc->fwevt_lock, flags); > + wq = mrioc->fwevt_worker_thread; > + mrioc->fwevt_worker_thread = NULL; > + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); > + if (wq) > + destroy_workqueue(wq); > > scsi_remove_host(shost); > + list_for_each_entry_safe(tgtdev, tgtdev_next, &mrioc->tgtdev_list, > + list) { > + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); > + mpi3mr_tgtdev_del_from_list(mrioc, tgtdev); > + mpi3mr_tgtdev_put(tgtdev); > + } > > mpi3mr_cleanup_ioc(mrioc); > > @@ -955,6 +2399,8 @@ static void mpi3mr_shutdown(struct pci_dev *pdev) > { > struct Scsi_Host *shost = pci_get_drvdata(pdev); > struct mpi3mr_ioc *mrioc; > + struct workqueue_struct *wq; > + unsigned long flags; > > if (!shost) > return; > @@ -963,6 +2409,13 @@ static void mpi3mr_shutdown(struct pci_dev *pdev) > while (mrioc->reset_in_progress || mrioc->is_driver_loading) > ssleep(1); > mrioc->stop_drv_processing = 1; > + mpi3mr_cleanup_fwevt_list(mrioc); > + spin_lock_irqsave(&mrioc->fwevt_lock, flags); > + wq = mrioc->fwevt_worker_thread; > + mrioc->fwevt_worker_thread = NULL; > + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); > + if (wq) > + destroy_workqueue(wq); > > mpi3mr_cleanup_ioc(mrioc); > >
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h index 46dd30ccb5f9..40409e22b268 100644 --- a/drivers/scsi/mpi3mr/mpi/mpi30_api.h +++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h @@ -14,8 +14,10 @@ #include "mpi30_type.h" #include "mpi30_transport.h" +#include "mpi30_cnfg.h" #include "mpi30_image.h" #include "mpi30_init.h" #include "mpi30_ioc.h" +#include "mpi30_sas.h" #endif /* MPI30_API_H */ diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h new file mode 100644 index 000000000000..3badb1bb85b1 --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h @@ -0,0 +1,2721 @@ +/* + * Copyright 2017-2020 Broadcom Inc. All rights reserved. + * + * Name: mpi30_cnfg.h + * Description: Contains definitions for Configuration messages and pages + * Creation Date: 03/15/2017 + * Version: 03.00.00 + */ +#ifndef MPI30_CNFG_H +#define MPI30_CNFG_H 1 + +/***************************************************************************** + * Configuration Page Types * + ****************************************************************************/ +#define MPI3_CONFIG_PAGETYPE_IO_UNIT (0x00) +#define MPI3_CONFIG_PAGETYPE_MANUFACTURING (0x01) +#define MPI3_CONFIG_PAGETYPE_IOC (0x02) +#define MPI3_CONFIG_PAGETYPE_UEFI_BSD (0x03) +#define MPI3_CONFIG_PAGETYPE_SECURITY (0x04) +#define MPI3_CONFIG_PAGETYPE_ENCLOSURE (0x11) +#define MPI3_CONFIG_PAGETYPE_DEVICE (0x12) +#define MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT (0x20) +#define MPI3_CONFIG_PAGETYPE_SAS_EXPANDER (0x21) +#define MPI3_CONFIG_PAGETYPE_SAS_PHY (0x23) +#define MPI3_CONFIG_PAGETYPE_SAS_PORT (0x24) +#define MPI3_CONFIG_PAGETYPE_PCIE_IO_UNIT (0x30) +#define MPI3_CONFIG_PAGETYPE_PCIE_SWITCH (0x31) +#define MPI3_CONFIG_PAGETYPE_PCIE_LINK (0x33) + +/***************************************************************************** + * Configuration Page Attributes * + ****************************************************************************/ +#define MPI3_CONFIG_PAGEATTR_MASK (0xF0) +#define MPI3_CONFIG_PAGEATTR_READ_ONLY (0x00) +#define MPI3_CONFIG_PAGEATTR_CHANGEABLE (0x10) +#define MPI3_CONFIG_PAGEATTR_PERSISTENT (0x20) + +/***************************************************************************** + * Configuration Page Actions * + ****************************************************************************/ +#define MPI3_CONFIG_ACTION_PAGE_HEADER (0x00) +#define MPI3_CONFIG_ACTION_READ_DEFAULT (0x01) +#define MPI3_CONFIG_ACTION_READ_CURRENT (0x02) +#define MPI3_CONFIG_ACTION_WRITE_CURRENT (0x03) +#define MPI3_CONFIG_ACTION_READ_PERSISTENT (0x04) +#define MPI3_CONFIG_ACTION_WRITE_PERSISTENT (0x05) + +/***************************************************************************** + * Configuration Page Addressing * + ****************************************************************************/ + +/**** Device PageAddress Format ****/ +#define MPI3_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI3_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI3_DEVICE_PGAD_FORM_HANDLE (0x20000000) +#define MPI3_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) + +/**** SAS Expander PageAddress Format ****/ +#define MPI3_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) +#define MPI3_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM (0x10000000) +#define MPI3_SAS_EXPAND_PGAD_FORM_HANDLE (0x20000000) +#define MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) +#define MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) +#define MPI3_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) + +/**** SAS Phy PageAddress Format ****/ +#define MPI3_SAS_PHY_PGAD_FORM_MASK (0xF0000000) +#define MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) +#define MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) + +/**** SAS Port PageAddress Format ****/ +#define MPI3_SASPORT_PGAD_FORM_MASK (0xF0000000) +#define MPI3_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) +#define MPI3_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) +#define MPI3_SASPORT_PGAD_PORT_NUMBER_MASK (0x000000FF) + +/**** Enclosure PageAddress Format ****/ +#define MPI3_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI3_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI3_ENCLOS_PGAD_FORM_HANDLE (0x10000000) +#define MPI3_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) + +/**** PCIe Switch PageAddress Format ****/ +#define MPI3_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000) +#define MPI3_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE_PORT_NUM (0x10000000) +#define MPI3_PCIE_SWITCH_PGAD_FORM_HANDLE (0x20000000) +#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000) +#define MPI3_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16) +#define MPI3_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF) + +/**** PCIe Link PageAddress Format ****/ +#define MPI3_PCIE_LINK_PGAD_FORM_MASK (0xF0000000) +#define MPI3_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000) +#define MPI3_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000) +#define MPI3_PCIE_LINK_PGAD_LINKNUM_MASK (0x000000FF) + +/**** Security PageAddress Format ****/ +#define MPI3_SECURITY_PGAD_FORM_MASK (0xF0000000) +#define MPI3_SECURITY_PGAD_FORM_GET_NEXT_SLOT (0x00000000) +#define MPI3_SECURITY_PGAD_FORM_SOT_NUM (0x10000000) +#define MPI3_SECURITY_PGAD_SLOT_GROUP_MASK (0x0000FF00) +#define MPI3_SECURITY_PGAD_SLOT_MASK (0x000000FF) + +/***************************************************************************** + * Configuration Request Message * + ****************************************************************************/ +typedef struct _MPI3_CONFIG_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U8 PageVersion; /* 0x0C */ + U8 PageNumber; /* 0x0D */ + U8 PageType; /* 0x0E */ + U8 Action; /* 0x0F */ + U32 PageAddress; /* 0x10 */ + U16 PageLength; /* 0x14 */ + U16 Reserved16; /* 0x16 */ + U32 Reserved18[2]; /* 0x18 */ + MPI3_SGE_UNION SGL; /* 0x20 */ +} MPI3_CONFIG_REQUEST, MPI3_POINTER PTR_MPI3_CONFIG_REQUEST, + Mpi3ConfigRequest_t, MPI3_POINTER pMpi3ConfigRequest_t; + +/***************************************************************************** + * Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * Configuration Page Header * + ****************************************************************************/ +typedef struct _MPI3_CONFIG_PAGE_HEADER { + U8 PageVersion; /* 0x00 */ + U8 Reserved01; /* 0x01 */ + U8 PageNumber; /* 0x02 */ + U8 PageAttribute; /* 0x03 */ + U16 PageLength; /* 0x04 */ + U8 PageType; /* 0x06 */ + U8 Reserved07; /* 0x07 */ +} MPI3_CONFIG_PAGE_HEADER, MPI3_POINTER PTR_MPI3_CONFIG_PAGE_HEADER, + Mpi3ConfigPageHeader_t, MPI3_POINTER pMpi3ConfigPageHeader_t; + +/***************************************************************************** + * Common definitions used by Configuration Pages * + ****************************************************************************/ + +/**** Defines for Negotiated Link Rates ****/ +#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK (0xF0) +#define MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT (4) +#define MPI3_SAS_NEG_LINK_RATE_PHYSICAL_MASK (0x0F) +#define MPI3_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) +#define MPI3_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI3_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) +#define MPI3_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) +#define MPI3_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) +#define MPI3_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) +#define MPI3_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06) +#define MPI3_SAS_NEG_LINK_RATE_1_5 (0x08) +#define MPI3_SAS_NEG_LINK_RATE_3_0 (0x09) +#define MPI3_SAS_NEG_LINK_RATE_6_0 (0x0A) +#define MPI3_SAS_NEG_LINK_RATE_12_0 (0x0B) +#define MPI3_SAS_NEG_LINK_RATE_22_5 (0x0C) + +/**** Defines for the AttachedPhyInfo field ****/ +#define MPI3_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) +#define MPI3_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) +#define MPI3_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) + +#define MPI3_SAS_APHYINFO_REASON_MASK (0x0000000F) +#define MPI3_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI3_SAS_APHYINFO_REASON_POWER_ON (0x00000001) +#define MPI3_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) +#define MPI3_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) +#define MPI3_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) +#define MPI3_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) +#define MPI3_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) +#define MPI3_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) +#define MPI3_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) +#define MPI3_SAS_APHYINFO_REASON_EXP_REDUCED_FUNC (0x00000009) + +/**** Defines for the PhyInfo field ****/ +#define MPI3_SAS_PHYINFO_STATUS_MASK (0xC0000000) +#define MPI3_SAS_PHYINFO_STATUS_SHIFT (30) +#define MPI3_SAS_PHYINFO_STATUS_ACCESSIBLE (0x00000000) +#define MPI3_SAS_PHYINFO_STATUS_NOT_EXIST (0x40000000) +#define MPI3_SAS_PHYINFO_STATUS_VACANT (0x80000000) + +#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000) +#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_ACTIVE (0x00000000) +#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_PARTIAL (0x08000000) +#define MPI3_SAS_PHYINFO_PHY_POWER_CONDITION_SLUMBER (0x10000000) + +#define MPI3_SAS_PHYINFO_REASON_MASK (0x000F0000) +#define MPI3_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI3_SAS_PHYINFO_REASON_POWER_ON (0x00010000) +#define MPI3_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) +#define MPI3_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) +#define MPI3_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) +#define MPI3_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) +#define MPI3_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) +#define MPI3_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) +#define MPI3_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) +#define MPI3_SAS_PHYINFO_REASON_EXP_REDUCED_FUNC (0x00090000) + +#define MPI3_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) +#define MPI3_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) +#define MPI3_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) + +#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_MASK (0x00000F00) +#define MPI3_SAS_PHYINFO_PARTIAL_PATHWAY_TIME_SHIFT (8) + +#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_MASK (0x000000F0) +#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_DIRECT (0x00000000) +#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_SUBTRACTIVE (0x00000010) +#define MPI3_SAS_PHYINFO_ROUTING_ATTRIBUTE_TABLE (0x00000020) + +/**** Defines for the ProgrammedLinkRate field ****/ +#define MPI3_SAS_PRATE_MAX_RATE_MASK (0xF0) +#define MPI3_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI3_SAS_PRATE_MAX_RATE_1_5 (0x80) +#define MPI3_SAS_PRATE_MAX_RATE_3_0 (0x90) +#define MPI3_SAS_PRATE_MAX_RATE_6_0 (0xA0) +#define MPI3_SAS_PRATE_MAX_RATE_12_0 (0xB0) +#define MPI3_SAS_PRATE_MAX_RATE_22_5 (0xC0) +#define MPI3_SAS_PRATE_MIN_RATE_MASK (0x0F) +#define MPI3_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI3_SAS_PRATE_MIN_RATE_1_5 (0x08) +#define MPI3_SAS_PRATE_MIN_RATE_3_0 (0x09) +#define MPI3_SAS_PRATE_MIN_RATE_6_0 (0x0A) +#define MPI3_SAS_PRATE_MIN_RATE_12_0 (0x0B) +#define MPI3_SAS_PRATE_MIN_RATE_22_5 (0x0C) + +/**** Defines for the HwLinkRate field ****/ +#define MPI3_SAS_HWRATE_MAX_RATE_MASK (0xF0) +#define MPI3_SAS_HWRATE_MAX_RATE_1_5 (0x80) +#define MPI3_SAS_HWRATE_MAX_RATE_3_0 (0x90) +#define MPI3_SAS_HWRATE_MAX_RATE_6_0 (0xA0) +#define MPI3_SAS_HWRATE_MAX_RATE_12_0 (0xB0) +#define MPI3_SAS_HWRATE_MAX_RATE_22_5 (0xC0) +#define MPI3_SAS_HWRATE_MIN_RATE_MASK (0x0F) +#define MPI3_SAS_HWRATE_MIN_RATE_1_5 (0x08) +#define MPI3_SAS_HWRATE_MIN_RATE_3_0 (0x09) +#define MPI3_SAS_HWRATE_MIN_RATE_6_0 (0x0A) +#define MPI3_SAS_HWRATE_MIN_RATE_12_0 (0x0B) +#define MPI3_SAS_HWRATE_MIN_RATE_22_5 (0x0C) + +/**** Defines for the Slot field ****/ +#define MPI3_SLOT_INVALID (0xFFFF) + +/**** Defines for the SlotIndex field ****/ +#define MPI3_SLOT_INDEX_INVALID (0xFFFF) + +/***************************************************************************** + * Manufacturing Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * Manufacturing Page 0 * + ****************************************************************************/ +typedef struct _MPI3_MAN_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 ChipRevision[8]; /* 0x08 */ + U8 ChipName[32]; /* 0x10 */ + U8 BoardName[32]; /* 0x30 */ + U8 BoardAssembly[32]; /* 0x50 */ + U8 BoardTracerNumber[32]; /* 0x70 */ + U32 BoardPower; /* 0x90 */ + U32 Reserved94; /* 0x94 */ + U32 Reserved98; /* 0x98 */ + U8 OEM; /* 0x9C */ + U8 SubOEM; /* 0x9D */ + U16 Reserved9E; /* 0x9E */ + U8 BoardMfgDay; /* 0xA0 */ + U8 BoardMfgMonth; /* 0xA1 */ + U16 BoardMfgYear; /* 0xA2 */ + U8 BoardReworkDay; /* 0xA4 */ + U8 BoardReworkMonth; /* 0xA5 */ + U16 BoardReworkYear; /* 0xA6 */ + U64 BoardRevision; /* 0xA8 */ + U8 EPackFRU[16]; /* 0xB0 */ + U8 ProductName[256]; /* 0xC0 */ +} MPI3_MAN_PAGE0, MPI3_POINTER PTR_MPI3_MAN_PAGE0, + Mpi3ManPage0_t, MPI3_POINTER pMpi3ManPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN0_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 1 * + ****************************************************************************/ + +#define MPI3_MAN1_VPD_SIZE (512) + +typedef struct _MPI3_MAN_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08[2]; /* 0x08 */ + U8 VPD[MPI3_MAN1_VPD_SIZE]; /* 0x10 */ +} MPI3_MAN_PAGE1, MPI3_POINTER PTR_MPI3_MAN_PAGE1, + Mpi3ManPage1_t, MPI3_POINTER pMpi3ManPage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN1_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 5 * + ****************************************************************************/ +typedef struct _MPI3_MAN5_PHY_ENTRY { + U64 IOC_WWID; /* 0x00 */ + U64 DeviceName; /* 0x08 */ + U64 SATA_WWID; /* 0x10 */ +} MPI3_MAN5_PHY_ENTRY, MPI3_POINTER PTR_MPI3_MAN5_PHY_ENTRY, + Mpi3Man5PhyEntry_t, MPI3_POINTER pMpi3Man5PhyEntry_t; + +#ifndef MPI3_MAN5_PHY_MAX +#define MPI3_MAN5_PHY_MAX (1) +#endif /* MPI3_MAN5_PHY_MAX */ + +typedef struct _MPI3_MAN_PAGE5 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x08 */ + U8 Reserved09[3]; /* 0x09 */ + U32 Reserved0C; /* 0x0C */ + MPI3_MAN5_PHY_ENTRY Phy[MPI3_MAN5_PHY_MAX]; /* 0x10 */ +} MPI3_MAN_PAGE5, MPI3_POINTER PTR_MPI3_MAN_PAGE5, + Mpi3ManPage5_t, MPI3_POINTER pMpi3ManPage5_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN5_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 6 * + ****************************************************************************/ +typedef struct _MPI3_MAN6_GPIO_ENTRY { + U8 FunctionCode; /* 0x00 */ + U8 Reserved01; /* 0x01 */ + U16 Flags; /* 0x02 */ + U8 Param1; /* 0x04 */ + U8 Param2; /* 0x05 */ + U16 Reserved06; /* 0x06 */ + U32 Param3; /* 0x08 */ +} MPI3_MAN6_GPIO_ENTRY, MPI3_POINTER PTR_MPI3_MAN6_GPIO_ENTRY, + Mpi3Man6GpioEntry_t, MPI3_POINTER pMpi3Man6GpioEntry_t; + +/**** Defines for the FunctionCode field ****/ +#define MPI3_MAN6_GPIO_FUNCTION_GENERIC (0x00) +#define MPI3_MAN6_GPIO_FUNCTION_ALTERNATE (0x01) +#define MPI3_MAN6_GPIO_FUNCTION_EXT_INTERRUPT (0x02) +#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_ACTIVITY (0x03) +#define MPI3_MAN6_GPIO_FUNCTION_OVER_TEMPERATURE (0x04) +#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_GREEN (0x05) +#define MPI3_MAN6_GPIO_FUNCTION_PORT_STATUS_YELLOW (0x06) +#define MPI3_MAN6_GPIO_FUNCTION_CABLE_MANAGEMENT (0x07) +#define MPI3_MAN6_GPIO_FUNCTION_BKPLANE_MGMT_TYPE (0x08) +#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_MUX_RESET (0x09) +#define MPI3_MAN6_GPIO_FUNCTION_ISTWI_RESET (0x0A) +#define MPI3_MAN6_GPIO_FUNCTION_BACKEND_PCIE_RESET (0x0B) +#define MPI3_MAN6_GPIO_FUNCTION_GLOBAL_FAULT (0x0C) +#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ATTN (0x0D) +#define MPI3_MAN6_GPIO_FUNCTION_EPACK_ONLINE (0x0E) +#define MPI3_MAN6_GPIO_FUNCTION_EPACK_FAULT (0x0F) +#define MPI3_MAN6_GPIO_FUNCTION_CTRL_TYPE (0x10) +#define MPI3_MAN6_GPIO_FUNCTION_LICENSE (0x11) +#define MPI3_MAN6_GPIO_FUNCTION_REFCLK_CONTROL (0x12) + +/**** Defines for Param1 (Flags) when FunctionCode is EXT_INTERRUPT ****/ +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_MASK (0xF0) +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_GENERIC (0x00) +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_CABLE_MGMT (0x10) +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_ACTIVE_CABLE_OVERCURRENT (0x20) + +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_MASK (0x01) +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_EDGE (0x00) +#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_LEVEL (0x01) + +/**** Defines for Param1 (PHY STATE) when FunctionCode is PORT_STATUS_GREEN ****/ +#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ALL_UP (0x00) +#define MPI3_MAN6_GPIO_PORT_GREEN_PARAM1_PHY_STATUS_ONE_OR_MORE_UP (0x01) + +/**** Defines for Param1 (INTERFACE_SIGNAL) when FunctionCode is CABLE_MANAGEMENT ****/ +#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_MODULE_PRESENT (0x00) +#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_ACTIVE_CABLE_ENABLE (0x01) +#define MPI3_MAN6_GPIO_CABLE_MGMT_PARAM1_INTERFACE_CABLE_MGMT_ENABLE (0x02) + +/**** Defines for Param2 (ISTWI RESET) when FunctionCode is ISTWI_MUX_RESET ****/ +#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_SPEC_MUX (0x00) +#define MPI3_MAN6_GPIO_ISTWI_MUX_RESET_PARAM2_ALL_MUXES (0x01) + +/**** Defines for Param1 (LECENSE_TYPE) when FunctionCode is LICENSE ****/ +#define MPI3_MAN6_GPIO_LICENSE_PARAM1_TYPE_IBUTTON (0x00) + + +/**** Defines for the Flags field ****/ +#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_MASK (0x0100) +#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_FAST_EDGE (0x0100) +#define MPI3_MAN6_GPIO_FLAGS_SLEW_RATE_SLOW_EDGE (0x0000) +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_MASK (0x00C0) +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_100OHM (0x0000) +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_66OHM (0x0040) +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_50OHM (0x0080) +#define MPI3_MAN6_GPIO_FLAGS_DRIVE_STRENGTH_33OHM (0x00C0) +#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_MASK (0x0030) +#define MPI3_MAN6_GPIO_FLAGS_ALT_DATA_SEL_SHIFT (4) +#define MPI3_MAN6_GPIO_FLAGS_ACTIVE_HIGH (0x0008) +#define MPI3_MAN6_GPIO_FLAGS_BI_DIR_ENABLED (0x0004) +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_MASK (0x0003) +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_INPUT (0x0000) +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_DRAIN_OUTPUT (0x0001) +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_OPEN_SOURCE_OUTPUT (0x0002) +#define MPI3_MAN6_GPIO_FLAGS_DIRECTION_PUSH_PULL_OUTPUT (0x0003) + +#ifndef MPI3_MAN6_GPIO_MAX +#define MPI3_MAN6_GPIO_MAX (1) +#endif /* MPI3_MAN6_GPIO_MAX */ + +typedef struct _MPI3_MAN_PAGE6 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 Flags; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U8 NumGPIO; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_MAN6_GPIO_ENTRY GPIO[MPI3_MAN6_GPIO_MAX]; /* 0x10 */ +} MPI3_MAN_PAGE6, MPI3_POINTER PTR_MPI3_MAN_PAGE6, + Mpi3ManPage6_t, MPI3_POINTER pMpi3ManPage6_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN6_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_MAN6_FLAGS_HEARTBEAT_LED_DISABLED (0x0001) + +/***************************************************************************** + * Manufacturing Page 7 * + ****************************************************************************/ +typedef struct _MPI3_MAN7_RECEPTACLE_INFO { + U32 Name[4]; /* 0x00 */ + U8 Location; /* 0x10 */ + U8 ConnectorType; /* 0x11 */ + U8 PEDClk; /* 0x12 */ + U8 ConnectorID; /* 0x13 */ + U32 Reserved14; /* 0x14 */ +} MPI3_MAN7_RECEPTACLE_INFO, MPI3_POINTER PTR_MPI3_MAN7_RECEPTACLE_INFO, + Mpi3Man7ReceptacleInfo_t, MPI3_POINTER pMpi3Man7ReceptacleInfo_t; + +/**** Defines for Location field ****/ +#define MPI3_MAN7_LOCATION_UNKNOWN (0x00) +#define MPI3_MAN7_LOCATION_INTERNAL (0x01) +#define MPI3_MAN7_LOCATION_EXTERNAL (0x02) +#define MPI3_MAN7_LOCATION_VIRTUAL (0x03) + +/**** Defines for ConnectorType - Use definitions from SES-4 ****/ + +/**** Defines for PEDClk field ****/ +#define MPI3_MAN7_PEDCLK_ROUTING_MASK (0x10) +#define MPI3_MAN7_PEDCLK_ROUTING_DIRECT (0x00) +#define MPI3_MAN7_PEDCLK_ROUTING_CLOCK_BUFFER (0x10) +#define MPI3_MAN7_PEDCLK_ID_MASK (0x0F) + +#ifndef MPI3_MAN7_RECEPTACLE_INFO_MAX +#define MPI3_MAN7_RECEPTACLE_INFO_MAX (1) +#endif /* MPI3_MAN7_RECEPTACLE_INFO_MAX */ + +typedef struct _MPI3_MAN_PAGE7 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x08 */ + U8 NumReceptacles; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + U32 EnclosureName[4]; /* 0x10 */ + MPI3_MAN7_RECEPTACLE_INFO ReceptacleInfo[MPI3_MAN7_RECEPTACLE_INFO_MAX]; /* 0x20 */ /* variable length array */ +} MPI3_MAN_PAGE7, MPI3_POINTER PTR_MPI3_MAN_PAGE7, + Mpi3ManPage7_t, MPI3_POINTER pMpi3ManPage7_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN7_PAGEVERSION (0x00) + +/**** Defines for Flags field ****/ +#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_MASK (0x01) +#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_0 (0x00) +#define MPI3_MAN7_FLAGS_BASE_ENCLOSURE_LEVEL_1 (0x01) + + +/***************************************************************************** + * Manufacturing Page 8 * + ****************************************************************************/ + +typedef struct _MPI3_MAN8_PHY_INFO { + U8 ReceptacleID; /* 0x00 */ + U8 ConnectorLane; /* 0x01 */ + U16 Reserved02; /* 0x02 */ + U16 Slotx1; /* 0x04 */ + U16 Slotx2; /* 0x06 */ + U16 Slotx4; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U32 Reserved0C; /* 0x0C */ +} MPI3_MAN8_PHY_INFO, MPI3_POINTER PTR_MPI3_MAN8_PHY_INFO, + Mpi3Man8PhyInfo_t, MPI3_POINTER pMpi3Man8PhyInfo_t; + +#ifndef MPI3_MAN8_PHY_INFO_MAX +#define MPI3_MAN8_PHY_INFO_MAX (1) +#endif /* MPI3_MAN8_PHY_INFO_MAX */ + +typedef struct _MPI3_MAN_PAGE8 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumPhys; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_MAN8_PHY_INFO PhyInfo[MPI3_MAN8_PHY_INFO_MAX]; /* 0x10 */ /* variable length array */ +} MPI3_MAN_PAGE8, MPI3_POINTER PTR_MPI3_MAN_PAGE8, + Mpi3ManPage8_t, MPI3_POINTER pMpi3ManPage8_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN8_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 9 * + ****************************************************************************/ +typedef struct _MPI3_MAN9_RSRC_ENTRY { + U32 Maximum; /* 0x00 */ + U32 Decrement; /* 0x04 */ + U32 Minimum; /* 0x08 */ + U32 Actual; /* 0x0C */ +} MPI3_MAN9_RSRC_ENTRY, MPI3_POINTER PTR_MPI3_MAN9_RSRC_ENTRY, + Mpi3Man9RsrcEntry_t, MPI3_POINTER pMpi3Man9RsrcEntry_t; + +typedef enum _MPI3_MAN9_RESOURCES { + MPI3_MAN9_RSRC_OUTSTANDING_REQS = 0, + MPI3_MAN9_RSRC_TARGET_CMDS = 1, + MPI3_MAN9_RSRC_SAS_TARGETS = 2, + MPI3_MAN9_RSRC_PCIE_TARGETS = 3, + MPI3_MAN9_RSRC_INITIATORS = 4, + MPI3_MAN9_RSRC_VDS = 5, + MPI3_MAN9_RSRC_ENCLOSURES = 6, + MPI3_MAN9_RSRC_ENCLOSURE_PHYS = 7, + MPI3_MAN9_RSRC_EXPANDERS = 8, + MPI3_MAN9_RSRC_PCIE_SWITCHES = 9, + MPI3_MAN9_RSRC_PDS = 10, + MPI3_MAN9_RSRC_HOST_PDS = 11, + MPI3_MAN9_RSRC_ADV_HOST_PDS = 12, + MPI3_MAN9_RSRC_RAID_PDS = 13, + MPI3_MAN9_RSRC_NUM_RESOURCES +} MPI3_MAN9_RESOURCES; + +#define MPI3_MAN9_MIN_OUTSTANDING_REQS (1) +#define MPI3_MAN9_MAX_OUTSTANDING_REQS (65000) + +#define MPI3_MAN9_MIN_TARGET_CMDS (0) +#define MPI3_MAN9_MAX_TARGET_CMDS (65535) + +#define MPI3_MAN9_MIN_SAS_TARGETS (0) +#define MPI3_MAN9_MAX_SAS_TARGETS (65535) + +#define MPI3_MAN9_MIN_PCIE_TARGETS (0) +/* Max PCIe Targets is product specific */ + +#define MPI3_MAN9_MIN_INITIATORS (0) +#define MPI3_MAN9_MAX_INITIATORS (65535) + +#define MPI3_MAN9_MIN_ENCLOSURES (0) +#define MPI3_MAN9_MAX_ENCLOSURES (65535) + +#define MPI3_MAN9_MIN_ENCLOSURE_PHYS (0) +/* + * Max Enclosure Phys depends on the largest enclosure + * i.e. the enclosure with the largest number of phys. + */ + +#define MPI3_MAN9_MIN_EXPANDERS (0) +#define MPI3_MAN9_MAX_EXPANDERS (65535) + +#define MPI3_MAN9_MIN_PCIE_SWITCHES (0) +/* Max PCIe Switches is product specific */ + +typedef struct _MPI3_MAN_PAGE9 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumResources; /* 0x08 */ + U8 Reserved09; /* 0x09 */ + U16 Reserved0A; /* 0x0A */ + U32 Reserved0C; /* 0x0C */ + U32 Reserved10; /* 0x10 */ + U32 Reserved14; /* 0x14 */ + U32 Reserved18; /* 0x18 */ + U32 Reserved1C; /* 0x1C */ + MPI3_MAN9_RSRC_ENTRY Resource[MPI3_MAN9_RSRC_NUM_RESOURCES]; /* 0x20 */ +} MPI3_MAN_PAGE9, MPI3_POINTER PTR_MPI3_MAN_PAGE9, + Mpi3ManPage9_t, MPI3_POINTER pMpi3ManPage9_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN9_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 10 * + ****************************************************************************/ +typedef struct _MPI3_MAN10_ISTWI_CTRLR_ENTRY { + U16 SlaveAddress; /* 0x00 */ + U16 Flags; /* 0x02 */ + U32 Reserved04; /* 0x04 */ +} MPI3_MAN10_ISTWI_CTRLR_ENTRY, MPI3_POINTER PTR_MPI3_MAN10_ISTWI_CTRLR_ENTRY, + Mpi3Man10IstwiCtrlrEntry_t, MPI3_POINTER pMpi3Man10IstwiCtrlrEntry_t; + +/**** Defines for the Flags field ****/ +#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_SLAVE_ENABLED (0x0002) +#define MPI3_MAN10_ISTWI_CTRLR_FLAGS_MASTER_ENABLED (0x0001) + +#ifndef MPI3_MAN10_ISTWI_CTRLR_MAX +#define MPI3_MAN10_ISTWI_CTRLR_MAX (1) +#endif /* MPI3_MAN10_ISTWI_CTRLR_MAX */ + +typedef struct _MPI3_MAN_PAGE10 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumISTWICtrl; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_MAN10_ISTWI_CTRLR_ENTRY ISTWIController[MPI3_MAN10_ISTWI_CTRLR_MAX]; /* 0x10 */ +} MPI3_MAN_PAGE10, MPI3_POINTER PTR_MPI3_MAN_PAGE10, + Mpi3ManPage10_t, MPI3_POINTER pMpi3ManPage10_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN10_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 11 * + ****************************************************************************/ +typedef struct _MPI3_MAN11_MUX_DEVICE_FORMAT { + U8 MaxChannel; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U32 Reserved04; /* 0x04 */ +} MPI3_MAN11_MUX_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_MUX_DEVICE_FORMAT, + Mpi3Man11MuxDeviceFormat_t, MPI3_POINTER pMpi3Man11MuxDeviceFormat_t; + +typedef struct _MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT { + U8 Type; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U8 TempChannel[4]; /* 0x04 */ +} MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT, + Mpi3Man11TempSensorDeviceFormat_t, MPI3_POINTER pMpi3Man11TempSensorDeviceFormat_t; + +/**** Defines for the Type field ****/ +#define MPI3_MAN11_TEMP_SENSOR_TYPE_MAX6654 (0x00) +#define MPI3_MAN11_TEMP_SENSOR_TYPE_EMC1442 (0x01) +#define MPI3_MAN11_TEMP_SENSOR_TYPE_ADT7476 (0x02) + +/**** Define for the TempChannel field ****/ +#define MPI3_MAN11_TEMP_SENSOR_CHANNEL_ENABLED (0x01) + +typedef struct _MPI3_MAN11_SEEPROM_DEVICE_FORMAT { + U8 Size; /* 0x00 */ + U8 PageWriteSize; /* 0x01 */ + U16 Reserved02; /* 0x02 */ + U32 Reserved04; /* 0x04 */ +} MPI3_MAN11_SEEPROM_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_SEEPROM_DEVICE_FORMAT, + Mpi3Man11SeepromDeviceFormat_t, MPI3_POINTER pMpi3Man11SeepromDeviceFormat_t; + +/**** Defines for the Size field ****/ +#define MPI3_MAN11_SEEPROM_SIZE_1KBITS (0x01) +#define MPI3_MAN11_SEEPROM_SIZE_2KBITS (0x02) +#define MPI3_MAN11_SEEPROM_SIZE_4KBITS (0x03) +#define MPI3_MAN11_SEEPROM_SIZE_8KBITS (0x04) +#define MPI3_MAN11_SEEPROM_SIZE_16KBITS (0x05) +#define MPI3_MAN11_SEEPROM_SIZE_32KBITS (0x06) +#define MPI3_MAN11_SEEPROM_SIZE_64KBITS (0x07) +#define MPI3_MAN11_SEEPROM_SIZE_128KBITS (0x08) + +typedef struct _MPI3_MAN11_DDR_SPD_DEVICE_FORMAT { + U8 Channel; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U32 Reserved04; /* 0x04 */ +} MPI3_MAN11_DDR_SPD_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_DDR_SPD_DEVICE_FORMAT, + Mpi3Man11DdrSpdDeviceFormat_t, MPI3_POINTER pMpi3Man11DdrSpdDeviceFormat_t; + +typedef struct _MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT { + U8 Type; /* 0x00 */ + U8 ReceptacleID; /* 0x01 */ + U16 Reserved02; /* 0x02 */ + U32 Reserved04; /* 0x04 */ +} MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT, + Mpi3Man11CableMgmtDeviceFormat_t, MPI3_POINTER pMpi3Man11CableMgmtDeviceFormat_t; + +/**** Defines for the Type field ****/ +#define MPI3_MAN11_CABLE_MGMT_TYPE_SFF_8636 (0x00) + +typedef struct _MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT { + U16 Flags; /* 0x00 */ + U16 Reserved02; /* 0x02 */ +} MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT, + Mpi3Man11BkplaneSpecUBMFormat, MPI3_POINTER pMpi3Man11BkplaneSpecUBMFormat; + +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0200) +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_FORCE_POLLING (0x0100) +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_MASK (0x00F0) +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_MAX_FRU_SHIFT (4) +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_MASK (0x000F) +#define MPI3_MAN11_BKPLANE_UBM_FLAGS_POLL_INTERVAL_SHIFT (0) + +typedef struct _MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT { + U16 Flags; /* 0x00 */ + U16 Reserved02; /* 0x02 */ +} MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT, + Mpi3Man11BkplaneSpecVPPFormat, MPI3_POINTER pMpi3Man11BkplaneSpecVPPFormat; + +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_REFCLK_POLICY_ALWAYS_ENABLED (0x0040) +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_MASK (0x0030) +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_GPIO (0x0000) +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_PRESENCE_DETECT_REG (0x0010) +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_MASK (0x000F) +#define MPI3_MAN11_BKPLANE_VPP_FLAGS_POLL_INTERVAL_SHIFT (0) + + +typedef union _MPI3_MAN11_BKPLANE_SPEC_FORMAT { + MPI3_MAN11_BKPLANE_SPEC_UBM_FORMAT Ubm; + MPI3_MAN11_BKPLANE_SPEC_VPP_FORMAT Vpp; +} MPI3_MAN11_BKPLANE_SPEC_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_SPEC_FORMAT, + Mpi3Man11BkplaneSpecFormat, MPI3_POINTER pMpi3Man11BkplaneSpecFormat; + +typedef struct _MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT { + U8 Type; /* 0x00 */ + U8 ReceptacleID; /* 0x01 */ + U16 Reserved02; /* 0x02 */ + MPI3_MAN11_BKPLANE_SPEC_FORMAT BackplaneMgmtSpecific; /* 0x04 */ +} MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT, + Mpi3Man11BkplaneMgmtDeviceFormat_t, MPI3_POINTER pMpi3Man11BkplaneMgmtDeviceFormat_t; + +/**** Defines for the Type field ****/ +#define MPI3_MAN11_BKPLANE_MGMT_TYPE_UBM (0x00) +#define MPI3_MAN11_BKPLANE_MGMT_TYPE_VPP (0x01) + +typedef struct _MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT { + U8 Type; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U32 Reserved04; /* 0x04 */ +} MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT, + Mpi3Man11GasGaugeDeviceFormat_t, MPI3_POINTER pMpi3Man11GasGaugeDeviceFormat_t; + +/**** Defines for the Type field ****/ +#define MPI3_MAN11_GAS_GAUGE_TYPE_STANDARD (0x00) + +typedef union _MPI3_MAN11_DEVICE_SPECIFIC_FORMAT { + MPI3_MAN11_MUX_DEVICE_FORMAT Mux; + MPI3_MAN11_TEMP_SENSOR_DEVICE_FORMAT TempSensor; + MPI3_MAN11_SEEPROM_DEVICE_FORMAT Seeprom; + MPI3_MAN11_DDR_SPD_DEVICE_FORMAT DdrSpd; + MPI3_MAN11_CABLE_MGMT_DEVICE_FORMAT CableMgmt; + MPI3_MAN11_BKPLANE_MGMT_DEVICE_FORMAT BkplaneMgmt; + MPI3_MAN11_GAS_GAUGE_DEVICE_FORMAT GasGauge; + U32 Words[2]; +} MPI3_MAN11_DEVICE_SPECIFIC_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_DEVICE_SPECIFIC_FORMAT, + Mpi3Man11DeviceSpecificFormat_t, MPI3_POINTER pMpi3Man11DeviceSpecificFormat_t; + +typedef struct _MPI3_MAN11_ISTWI_DEVICE_FORMAT { + U8 DeviceType; /* 0x00 */ + U8 Controller; /* 0x01 */ + U8 Reserved02; /* 0x02 */ + U8 Flags; /* 0x03 */ + U16 DeviceAddress; /* 0x04 */ + U8 MuxChannel; /* 0x06 */ + U8 MuxIndex; /* 0x07 */ + MPI3_MAN11_DEVICE_SPECIFIC_FORMAT DeviceSpecific; /* 0x08 */ +} MPI3_MAN11_ISTWI_DEVICE_FORMAT, MPI3_POINTER PTR_MPI3_MAN11_ISTWI_DEVICE_FORMAT, + Mpi3Man11IstwiDeviceFormat_t, MPI3_POINTER pMpi3Man11IstwiDeviceFormat_t; + +/**** Defines for the DeviceType field ****/ +#define MPI3_MAN11_ISTWI_DEVTYPE_MUX (0x00) +#define MPI3_MAN11_ISTWI_DEVTYPE_TEMP_SENSOR (0x01) +#define MPI3_MAN11_ISTWI_DEVTYPE_SEEPROM (0x02) +#define MPI3_MAN11_ISTWI_DEVTYPE_DDR_SPD (0x03) +#define MPI3_MAN11_ISTWI_DEVTYPE_CABLE_MGMT (0x04) +#define MPI3_MAN11_ISTWI_DEVTYPE_BACKPLANE_MGMT (0x05) +#define MPI3_MAN11_ISTWI_DEVTYPE_GAS_GAUGE (0x06) + +/**** Defines for the Flags field ****/ +#define MPI3_MAN11_ISTWI_FLAGS_MUX_PRESENT (0x01) +#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_MASK (0x06) +#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_100KHZ (0x00) +#define MPI3_MAN11_ISTWI_FLAGS_BUS_SPEED_400KHZ (0x02) + +#ifndef MPI3_MAN11_ISTWI_DEVICE_MAX +#define MPI3_MAN11_ISTWI_DEVICE_MAX (1) +#endif /* MPI3_MAN11_ISTWI_DEVICE_MAX */ + +typedef struct _MPI3_MAN_PAGE11 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumISTWIDev; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_MAN11_ISTWI_DEVICE_FORMAT ISTWIDevice[MPI3_MAN11_ISTWI_DEVICE_MAX]; /* 0x10 */ +} MPI3_MAN_PAGE11, MPI3_POINTER PTR_MPI3_MAN_PAGE11, + Mpi3ManPage11_t, MPI3_POINTER pMpi3ManPage11_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN11_PAGEVERSION (0x00) + + +/***************************************************************************** + * Manufacturing Page 12 * + ****************************************************************************/ +#ifndef MPI3_MAN12_NUM_SGPIO_MAX +#define MPI3_MAN12_NUM_SGPIO_MAX (1) +#endif /* MPI3_MAN12_NUM_SGPIO_MAX */ + +typedef struct _MPI3_MAN12_SGPIO_INFO { + U8 SlotCount; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U32 Reserved04; /* 0x04 */ + U8 PhyOrder[32]; /* 0x08 */ +} MPI3_MAN12_SGPIO_INFO, MPI3_POINTER PTR_MPI3_MAN12_SGPIO_INFO, + Mpi3Man12SGPIOInfo, MPI3_POINTER pMpi3Man12SGPIOInfo; + +typedef struct _MPI3_MAN_PAGE12 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x08 */ + U32 SClockFreq; /* 0x0C */ + U32 ActivityModulation; /* 0x10 */ + U8 NumSGPIO; /* 0x14 */ + U8 Reserved15[3]; /* 0x15 */ + U32 Reserved18; /* 0x18 */ + U32 Reserved1C; /* 0x1C */ + U32 Pattern[8]; /* 0x20 */ + MPI3_MAN12_SGPIO_INFO SGPIOInfo[MPI3_MAN12_NUM_SGPIO_MAX]; /* 0x40 */ /* variable length */ +} MPI3_MAN_PAGE12, MPI3_POINTER PTR_MPI3_MAN_PAGE12, + Mpi3ManPage12_t, MPI3_POINTER pMpi3ManPage12_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN12_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_MAN12_FLAGS_ERROR_PRESENCE_ENABLED (0x0400) +#define MPI3_MAN12_FLAGS_ACTIVITY_INVERT_ENABLED (0x0200) +#define MPI3_MAN12_FLAGS_GROUP_ID_DISABLED (0x0100) +#define MPI3_MAN12_FLAGS_SIO_CLK_FILTER_ENABLED (0x0004) +#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_MASK (0x0002) +#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_PUSH_PULL (0x0000) +#define MPI3_MAN12_FLAGS_SCLOCK_SLOAD_TYPE_OPEN_DRAIN (0x0002) +#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_MASK (0x0001) +#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_PUSH_PULL (0x0000) +#define MPI3_MAN12_FLAGS_SDATAOUT_TYPE_OPEN_DRAIN (0x0001) + +/**** Defines for the SioClkFreq field ****/ +#define MPI3_MAN12_SIO_CLK_FREQ_MIN (32) /* 32 Hz min SIO Clk Freq */ +#define MPI3_MAN12_SIO_CLK_FREQ_MAX (100000) /* 100 KHz max SIO Clk Freq */ + +/**** Defines for the ActivityModulation field ****/ +#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_MASK (0x0000F000) +#define MPI3_MAN12_ACTIVITY_MODULATION_FORCE_OFF_SHIFT (12) +#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_MASK (0x00000F00) +#define MPI3_MAN12_ACTIVITY_MODULATION_MAX_ON_SHIFT (8) +#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_MASK (0x000000F0) +#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_OFF_SHIFT (4) +#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_MASK (0x0000000F) +#define MPI3_MAN12_ACTIVITY_MODULATION_STRETCH_ON_SHIFT (0) + +/*** Defines for the Pattern field ****/ +#define MPI3_MAN12_PATTERN_RATE_MASK (0xE0000000) +#define MPI3_MAN12_PATTERN_RATE_2_HZ (0x00000000) +#define MPI3_MAN12_PATTERN_RATE_4_HZ (0x20000000) +#define MPI3_MAN12_PATTERN_RATE_8_HZ (0x40000000) +#define MPI3_MAN12_PATTERN_RATE_16_HZ (0x60000000) +#define MPI3_MAN12_PATTERN_RATE_10_HZ (0x80000000) +#define MPI3_MAN12_PATTERN_RATE_20_HZ (0xA0000000) +#define MPI3_MAN12_PATTERN_RATE_40_HZ (0xC0000000) +#define MPI3_MAN12_PATTERN_LENGTH_MASK (0x1F000000) +#define MPI3_MAN12_PATTERN_LENGTH_SHIFT (24) +#define MPI3_MAN12_PATTERN_BIT_PATTERN_MASK (0x00FFFFFF) +#define MPI3_MAN12_PATTERN_BIT_PATTERN_SHIFT (0) + + +/***************************************************************************** + * Manufacturing Page 13 * + ****************************************************************************/ + +#ifndef MPI3_MAN13_NUM_TRANSLATION_MAX +#define MPI3_MAN13_NUM_TRANSLATION_MAX (1) +#endif /* MPI3_MAN13_NUM_TRANSLATION_MAX */ + +typedef struct _MPI3_MAN13_TRANSLATION_INFO { + U32 SlotStatus; /* 0x00 */ + U32 Mask; /* 0x04 */ + U8 Activity; /* 0x08 */ + U8 Locate; /* 0x09 */ + U8 Error; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ +} MPI3_MAN13_TRANSLATION_INFO, MPI3_POINTER PTR_MPI3_MAN13_TRANSLATION_INFO, + Mpi3Man13TranslationInfo, MPI3_POINTER pMpi3Man13TranslationInfo; + +/**** Defines for the SlotStatus field ****/ +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_FAULT (0x20000000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_OFF (0x10000000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_ACTIVITY (0x00800000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DO_NOT_REMOVE (0x00400000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_DEVICE_MISSING (0x00100000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_INSERT (0x00080000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REMOVAL (0x00040000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IDENTIFY (0x00020000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_OK (0x00008000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_RESERVED_DEVICE (0x00004000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_HOT_SPARE (0x00002000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_CONSISTENCY_CHECK (0x00001000) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000800) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_IN_FAILED_ARRAY (0x00000400) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP (0x00000200) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_REBUILD_REMAP_ABORT (0x00000100) +#define MPI3_MAN13_TRANSLATION_SLOTSTATUS_PREDICTED_FAILURE (0x00000040) + +/**** Defines for the Mask field - use MPI3_MAN13_TRANSLATION_SLOTSTATUS_ defines ****/ + +/**** Defines for the Activity, Locate, and Error fields ****/ +#define MPI3_MAN13_BLINK_PATTERN_FORCE_OFF (0x00) +#define MPI3_MAN13_BLINK_PATTERN_FORCE_ON (0x01) +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_0 (0x02) +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_1 (0x03) +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_2 (0x04) +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_3 (0x05) +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_4 (0x06) +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_5 (0x07) +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_6 (0x08) +#define MPI3_MAN13_BLINK_PATTERN_PATTERN_7 (0x09) +#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY (0x0A) +#define MPI3_MAN13_BLINK_PATTERN_ACTIVITY_TRAIL (0x0B) + +typedef struct _MPI3_MAN_PAGE13 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumTrans; /* 0x08 */ + U8 Reserved09[3]; /* 0x09 */ + U32 Reserved0C; /* 0x0C */ + MPI3_MAN13_TRANSLATION_INFO Translation[MPI3_MAN13_NUM_TRANSLATION_MAX]; /* 0x10 */ /* variable length */ +} MPI3_MAN_PAGE13, MPI3_POINTER PTR_MPI3_MAN_PAGE13, + Mpi3ManPage13_t, MPI3_POINTER pMpi3ManPage13_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN13_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 14 * + ****************************************************************************/ + +typedef struct _MPI3_MAN_PAGE14 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 Flags; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U8 NumSlotGroups; /* 0x0C */ + U8 NumSlots; /* 0x0D */ + U16 MaxCertChainLength; /* 0x0E */ + U32 SealedSlots; /* 0x10 */ +} MPI3_MAN_PAGE14, MPI3_POINTER PTR_MPI3_MAN_PAGE14, + Mpi3ManPage14_t, MPI3_POINTER pMpi3ManPage14_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN14_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_MAN14_FLAGS_AUTH_SESSION_REQ (0x01) +#define MPI3_MAN14_FLAGS_AUTH_API_MASK (0x0E) +#define MPI3_MAN14_FLAGS_AUTH_API_NONE (0x00) +#define MPI3_MAN14_FLAGS_AUTH_API_CEREBUS (0x02) +#define MPI3_MAN14_FLAGS_AUTH_API_DMTF_PMCI (0x04) + +/***************************************************************************** + * Manufacturing Page 15 * + ****************************************************************************/ + +#ifndef MPI3_MAN15_VERSION_RECORD_MAX +#define MPI3_MAN15_VERSION_RECORD_MAX 1 +#endif /* MPI3_MAN15_VERSION_RECORD_MAX */ + +typedef struct _MPI3_MAN15_VERSION_RECORD { + U16 SPDMVersion; /* 0x00 */ + U16 Reserved02; /* 0x02 */ +} MPI3_MAN15_VERSION_RECORD, MPI3_POINTER PTR_MPI3_MAN15_VERSION_RECORD, + Mpi3Man15VersionRecord_t, MPI3_POINTER pMpi3Man15VersionRecord_t; + +typedef struct _MPI3_MAN_PAGE15 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumVersionRecords; /* 0x08 */ + U8 Reserved09[3]; /* 0x09 */ + U32 Reserved0C; /* 0x0C */ + MPI3_MAN15_VERSION_RECORD VersionRecord[MPI3_MAN15_VERSION_RECORD_MAX]; /* 0x10 */ +} MPI3_MAN_PAGE15, MPI3_POINTER PTR_MPI3_MAN_PAGE15, + Mpi3ManPage15_t, MPI3_POINTER pMpi3ManPage15_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN15_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 16 * + ****************************************************************************/ + +#ifndef MPI3_MAN16_CERT_ALGO_MAX +#define MPI3_MAN16_CERT_ALGO_MAX 1 +#endif /* MPI3_MAN16_CERT_ALGO_MAX */ + +typedef struct _MPI3_MAN16_CERTIFICATE_ALGORITHM { + U8 SlotGroup; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U32 BaseAsymAlgo; /* 0x04 */ + U32 BaseHashAlgo; /* 0x08 */ + U32 Reserved0C[3]; /* 0x0C */ +} MPI3_MAN16_CERTIFICATE_ALGORITHM, MPI3_POINTER PTR_MPI3_MAN16_CERTIFICATE_ALGORITHM, + Mpi3Man16CertificateAlgorithm_t, MPI3_POINTER pMpi3Man16CertificateAlgorithm_t; + +typedef struct _MPI3_MAN_PAGE16 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumCertAlgos; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_MAN16_CERTIFICATE_ALGORITHM CertificateAlgorithm[MPI3_MAN16_CERT_ALGO_MAX]; /* 0x10 */ +} MPI3_MAN_PAGE16, MPI3_POINTER PTR_MPI3_MAN_PAGE16, + Mpi3ManPage16_t, MPI3_POINTER pMpi3ManPage16_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN16_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 17 * + ****************************************************************************/ + +#ifndef MPI3_MAN17_HASH_ALGORITHM_MAX +#define MPI3_MAN17_HASH_ALGORITHM_MAX 1 +#endif /* MPI3_MAN17_HASH_ALGORITHM_MAX */ + +typedef struct _MPI3_MAN17_HASH_ALGORITHM { + U8 MeasSpecification; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U32 MeasurementHashAlgo; /* 0x04 */ + U32 Reserved08[2]; /* 0x08 */ +} MPI3_MAN17_HASH_ALGORITHM, MPI3_POINTER PTR_MPI3_MAN17_HASH_ALGORITHM, + Mpi3Man17HashAlgorithm_t, MPI3_POINTER pMpi3Man17HashAlgorithm_t; + +typedef struct _MPI3_MAN_PAGE17 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumHashAlgos; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_MAN17_HASH_ALGORITHM HashAlgorithm[MPI3_MAN17_HASH_ALGORITHM_MAX]; /* 0x10 */ +} MPI3_MAN_PAGE17, MPI3_POINTER PTR_MPI3_MAN_PAGE17, + Mpi3ManPage17_t, MPI3_POINTER pMpi3ManPage17_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN17_PAGEVERSION (0x00) + +/***************************************************************************** + * Manufacturing Page 20 * + ****************************************************************************/ + +typedef struct _MPI3_MAN_PAGE20 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U32 NonpremiumFeatures; /* 0x0C */ + U8 AllowedPersonalities; /* 0x10 */ + U8 Reserved11[3]; /* 0x11 */ +} MPI3_MAN_PAGE20, MPI3_POINTER PTR_MPI3_MAN_PAGE20, + Mpi3ManPage20_t, MPI3_POINTER pMpi3ManPage20_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN20_PAGEVERSION (0x00) + +/**** Defines for the AllowedPersonalities field ****/ +#define MPI3_MAN20_ALLOWEDPERSON_RAID_MASK (0x02) +#define MPI3_MAN20_ALLOWEDPERSON_RAID_ALLOWED (0x02) +#define MPI3_MAN20_ALLOWEDPERSON_RAID_NOT_ALLOWED (0x00) +#define MPI3_MAN20_ALLOWEDPERSON_EHBA_MASK (0x01) +#define MPI3_MAN20_ALLOWEDPERSON_EHBA_ALLOWED (0x01) +#define MPI3_MAN20_ALLOWEDPERSON_EHBA_NOT_ALLOWED (0x00) + +/**** Defines for the NonpremuimFeatures field ****/ +#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_MASK (0x01) +#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_ENABLED (0x00) +#define MPI3_MAN20_NONPREMUIM_DISABLE_PD_DEGRADED_DISABLED (0x01) + +/***************************************************************************** + * Manufacturing Page 21 * + ****************************************************************************/ + +typedef struct _MPI3_MAN_PAGE21 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U32 Flags; /* 0x0C */ +} MPI3_MAN_PAGE21, MPI3_POINTER PTR_MPI3_MAN_PAGE21, + Mpi3ManPage21_t, MPI3_POINTER pMpi3ManPage21_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_MAN21_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_MASK (0x80) +#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_ENABLED (0x80) +#define MPI3_MAN21_FLAGS_HOST_METADATA_CAPABILITY_DISABLED (0x00) +#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_MASK (0x60) +#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_BLOCK (0x00) +#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_ALLOW (0x20) +#define MPI3_MAN21_FLAGS_UNCERTIFIED_DRIVES_WARN (0x40) +#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_MASK (0x08) +#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_ALLOW (0x00) +#define MPI3_MAN21_FLAGS_BLOCK_SSD_WR_CACHE_CHANGE_PREVENT (0x08) +#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_MASK (0x01) +#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_DEFAULT (0x00) +#define MPI3_MAN21_FLAGS_SES_VPD_ASSOC_OEM_SPECIFIC (0x01) + +/***************************************************************************** + * Manufacturing Pages 32-63 (ProductSpecific) * + ****************************************************************************/ +#ifndef MPI3_MAN_PROD_SPECIFIC_MAX +#define MPI3_MAN_PROD_SPECIFIC_MAX (1) +#endif /* MPI3_MAN_PROD_SPECIFIC_MAX */ + +typedef struct _MPI3_MAN_PAGE_PRODUCT_SPECIFIC { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 ProductSpecificInfo[MPI3_MAN_PROD_SPECIFIC_MAX]; /* 0x08 */ /* variable length array */ +} MPI3_MAN_PAGE_PRODUCT_SPECIFIC, MPI3_POINTER PTR_MPI3_MAN_PAGE_PRODUCT_SPECIFIC, + Mpi3ManPageProductSpecific_t, MPI3_POINTER pMpi3ManPageProductSpecific_t; + +/***************************************************************************** + * IO Unit Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * IO Unit Page 0 * + ****************************************************************************/ +typedef struct _MPI3_IO_UNIT_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U64 UniqueValue; /* 0x08 */ + U32 NvdataVersionDefault; /* 0x10 */ + U32 NvdataVersionPersistent; /* 0x14 */ +} MPI3_IO_UNIT_PAGE0, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE0, + Mpi3IOUnitPage0_t, MPI3_POINTER pMpi3IOUnitPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT0_PAGEVERSION (0x00) + +/***************************************************************************** + * IO Unit Page 1 * + ****************************************************************************/ +typedef struct _MPI3_IO_UNIT_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x08 */ + U8 DMDIoDelay; /* 0x0C */ + U8 DMDReportPCIe; /* 0x0D */ + U8 DMDReportSATA; /* 0x0E */ + U8 DMDReportSAS; /* 0x0F */ +} MPI3_IO_UNIT_PAGE1, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE1, + Mpi3IOUnitPage1_t, MPI3_POINTER pMpi3IOUnitPage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT1_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_MASK (0x00000030) +#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_ENABLE (0x00000000) +#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_DISABLE (0x00000010) +#define MPI3_IOUNIT1_FLAGS_NVME_WRITE_CACHE_NO_MODIFY (0x00000020) +#define MPI3_IOUNIT1_FLAGS_ATA_SECURITY_FREEZE_LOCK (0x00000008) +#define MPI3_IOUNIT1_FLAGS_WRITE_SAME_BUFFER (0x00000004) +#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_MASK (0x00000003) +#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_ENABLE (0x00000000) +#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_DISABLE (0x00000001) +#define MPI3_IOUNIT1_FLAGS_SATA_WRITE_CACHE_UNCHANGED (0x00000002) + +/**** Defines for the DMDReport PCIe/SATA/SAS fields ****/ +#define MPI3_IOUNIT1_DMD_REPORT_DELAY_TIME_MASK (0x7F) +#define MPI3_IOUNIT1_DMD_REPORT_UNIT_16_SEC (0x80) + +/***************************************************************************** + * IO Unit Page 2 * + ****************************************************************************/ +#ifndef MPI3_IO_UNIT2_GPIO_VAL_MAX +#define MPI3_IO_UNIT2_GPIO_VAL_MAX (1) +#endif /* MPI3_IO_UNIT2_GPIO_VAL_MAX */ + +typedef struct _MPI3_IO_UNIT_PAGE2 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 GPIOCount; /* 0x08 */ + U8 Reserved09[3]; /* 0x09 */ + U16 GPIOVal[MPI3_IO_UNIT2_GPIO_VAL_MAX]; /* 0x0C */ +} MPI3_IO_UNIT_PAGE2, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE2, + Mpi3IOUnitPage2_t, MPI3_POINTER pMpi3IOUnitPage2_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT2_PAGEVERSION (0x00) + +/**** Define for the GPIOVal field ****/ +#define MPI3_IOUNIT2_GPIO_FUNCTION_MASK (0xFFFC) +#define MPI3_IOUNIT2_GPIO_FUNCTION_SHIFT (2) +#define MPI3_IOUNIT2_GPIO_SETTING_MASK (0x0001) +#define MPI3_IOUNIT2_GPIO_SETTING_OFF (0x0000) +#define MPI3_IOUNIT2_GPIO_SETTING_ON (0x0001) + +/***************************************************************************** + * IO Unit Page 3 * + ****************************************************************************/ + +typedef struct _MPI3_IO_UNIT3_SENSOR { + U16 Flags; /* 0x00 */ + U16 Reserved02; /* 0x02 */ + U16 Threshold[4]; /* 0x04 */ + U32 Reserved0C; /* 0x0C */ + U32 Reserved10; /* 0x10 */ + U32 Reserved14; /* 0x14 */ +} MPI3_IO_UNIT3_SENSOR, MPI3_POINTER PTR_MPI3_IO_UNIT3_SENSOR, + Mpi3IOUnit3Sensor_t, MPI3_POINTER pMpi3IOUnit3Sensor_t; + +/**** Defines for the Flags field ****/ +#define MPI3_IOUNIT3_SENSOR_FLAGS_T3_ENABLE (0x0008) +#define MPI3_IOUNIT3_SENSOR_FLAGS_T2_ENABLE (0x0004) +#define MPI3_IOUNIT3_SENSOR_FLAGS_T1_ENABLE (0x0002) +#define MPI3_IOUNIT3_SENSOR_FLAGS_T0_ENABLE (0x0001) + +#ifndef MPI3_IO_UNIT3_SENSOR_MAX +#define MPI3_IO_UNIT3_SENSOR_MAX (1) +#endif /* MPI3_IO_UNIT3_SENSOR_MAX */ + +typedef struct _MPI3_IO_UNIT_PAGE3 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumSensors; /* 0x0C */ + U8 PollingInterval; /* 0x0D */ + U16 Reserved0E; /* 0x0E */ + MPI3_IO_UNIT3_SENSOR Sensor[MPI3_IO_UNIT3_SENSOR_MAX]; /* 0x10 */ +} MPI3_IO_UNIT_PAGE3, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE3, + Mpi3IOUnitPage3_t, MPI3_POINTER pMpi3IOUnitPage3_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT3_PAGEVERSION (0x00) + +/***************************************************************************** + * IO Unit Page 4 * + ****************************************************************************/ +typedef struct _MPI3_IO_UNIT4_SENSOR { + U16 CurrentTemperature; /* 0x00 */ + U16 Reserved02; /* 0x02 */ + U8 Flags; /* 0x04 */ + U8 Reserved05[3]; /* 0x05 */ + U32 Reserved08; /* 0x08 */ + U32 Reserved0C; /* 0x0C */ +} MPI3_IO_UNIT4_SENSOR, MPI3_POINTER PTR_MPI3_IO_UNIT4_SENSOR, + Mpi3IOUnit4Sensor_t, MPI3_POINTER pMpi3IOUnit4Sensor_t; + +/**** Defines for the Flags field ****/ +#define MPI3_IOUNIT4_SENSOR_FLAGS_TEMP_VALID (0x01) + +#ifndef MPI3_IO_UNIT4_SENSOR_MAX +#define MPI3_IO_UNIT4_SENSOR_MAX (1) +#endif /* MPI3_IO_UNIT4_SENSOR_MAX */ + +typedef struct _MPI3_IO_UNIT_PAGE4 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumSensors; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_IO_UNIT4_SENSOR Sensor[MPI3_IO_UNIT4_SENSOR_MAX]; /* 0x10 */ +} MPI3_IO_UNIT_PAGE4, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE4, + Mpi3IOUnitPage4_t, MPI3_POINTER pMpi3IOUnitPage4_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT4_PAGEVERSION (0x00) + +/***************************************************************************** + * IO Unit Page 5 * + ****************************************************************************/ +typedef struct _MPI3_IO_UNIT5_SPINUP_GROUP { + U8 MaxTargetSpinup; /* 0x00 */ + U8 SpinupDelay; /* 0x01 */ + U8 SpinupFlags; /* 0x02 */ + U8 Reserved03; /* 0x03 */ +} MPI3_IO_UNIT5_SPINUP_GROUP, MPI3_POINTER PTR_MPI3_IO_UNIT5_SPINUP_GROUP, + Mpi3IOUnit5SpinupGroup_t, MPI3_POINTER pMpi3IOUnit5SpinupGroup_t; + +/**** Defines for the SpinupFlags field ****/ +#define MPI3_IOUNIT5_SPINUP_FLAGS_DISABLE (0x01) + +#ifndef MPI3_IO_UNIT5_PHY_MAX +#define MPI3_IO_UNIT5_PHY_MAX (4) +#endif /* MPI3_IO_UNIT5_PHY_MAX */ + +typedef struct _MPI3_IO_UNIT_PAGE5 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + MPI3_IO_UNIT5_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */ + U32 Reserved18; /* 0x18 */ + U32 Reserved1C; /* 0x1C */ + U32 Reserved20; /* 0x20 */ + U8 Reserved24; /* 0x24 */ + U8 SATADeviceWaitTime; /* 0x25 */ + U8 SpinupEnclDriveCount; /* 0x26 */ + U8 SpinupEnclDelay; /* 0x27 */ + U8 NumPhys; /* 0x28 */ + U8 PEInitialSpinupDelay; /* 0x29 */ + U8 TopologyStableTime; /* 0x2A */ + U8 Flags; /* 0x2B */ + U8 Phy[MPI3_IO_UNIT5_PHY_MAX]; /* 0x2C */ +} MPI3_IO_UNIT_PAGE5, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE5, + Mpi3IOUnitPage5_t, MPI3_POINTER pMpi3IOUnitPage5_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT5_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_IOUNIT5_FLAGS_POWER_CAPABLE_SPINUP (0x02) +#define MPI3_IOUNIT5_FLAGS_AUTO_PORT_ENABLE (0x01) + +/**** Defines for the PHY field ****/ +#define MPI3_IOUNIT5_PHY_SPINUP_GROUP_MASK (0x03) + +/***************************************************************************** + * IO Unit Page 6 * + ****************************************************************************/ +typedef struct _MPI3_IO_UNIT_PAGE6 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 BoardPowerRequirement; /* 0x08 */ + U32 PCISlotPowerAllocation; /* 0x0C */ + U8 Flags; /* 0x10 */ + U8 Reserved11[3]; /* 0x11 */ +} MPI3_IO_UNIT_PAGE6, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE6, + Mpi3IOUnitPage6_t, MPI3_POINTER pMpi3IOUnitPage6_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT6_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_IOUNIT6_FLAGS_ACT_CABLE_PWR_EXC (0x01) + +/***************************************************************************** + * IO Unit Page 7 * + ****************************************************************************/ +typedef struct _MPI3_IO_UNIT_PAGE7 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ +} MPI3_IO_UNIT_PAGE7, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE7, + Mpi3IOUnitPage7_t, MPI3_POINTER pMpi3IOUnitPage7_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT7_PAGEVERSION (0x00) + +/***************************************************************************** + * IO Unit Page 8 * + ****************************************************************************/ + +#ifndef MPI3_IOUNIT8_DIGEST_MAX +#define MPI3_IOUNIT8_DIGEST_MAX (1) +#endif /* MPI3_IOUNIT8_DIGEST_MAX */ + +typedef union _MPI3_IOUNIT8_DIGEST { + U32 Dword[16]; + U16 Word[32]; + U8 Byte[64]; +} MPI3_IOUNIT8_DIGEST, MPI3_POINTER PTR_MPI3_IOUNIT8_DIGEST, + Mpi3IOUnit8Digest, MPI3_POINTER pMpi3IOUnit8Digest; + +typedef struct _MPI3_IO_UNIT_PAGE8 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 SBMode; /* 0x08 */ + U8 SbState; /* 0x09 */ + U16 Reserved0A; /* 0x0A */ + U8 NumSlots; /* 0x0C */ + U8 SlotsAvailable; /* 0x0D */ + U8 CurrentKeyEncryptionAlgo; /* 0x0E */ + U8 KeyDigestHashAlgo; /* 0x0F */ + U32 Reserved10[2]; /* 0x10 */ + U32 CurrentKey[128]; /* 0x18 */ + MPI3_IOUNIT8_DIGEST Digest[MPI3_IOUNIT8_DIGEST_MAX]; /* 0x218 */ /* variable length */ +} MPI3_IO_UNIT_PAGE8, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE8, + Mpi3IOUnitPage8_t, MPI3_POINTER pMpi3IOUnitPage8_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT8_PAGEVERSION (0x00) + +/**** Defines for the SBMode field ****/ +#define MPI3_IOUNIT8_SBMODE_SECURE_DEBUG (0x04) +#define MPI3_IOUNIT8_SBMODE_HARD_SECURE (0x02) +#define MPI3_IOUNIT8_SBMODE_CONFIG_SECURE (0x01) + +/**** Defines for the SBState field ****/ +#define MPI3_IOUNIT8_SBSTATE_KEY_UPDATE_PENDING (0x02) +#define MPI3_IOUNIT8_SBSTATE_SECURE_BOOT_ENABLED (0x01) + +/***************************************************************************** + * IO Unit Page 9 * + ****************************************************************************/ + +typedef struct _MPI3_IO_UNIT_PAGE9 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x08 */ + U16 FirstDevice; /* 0x0C */ + U16 Reserved0E; /* 0x0E */ +} MPI3_IO_UNIT_PAGE9, MPI3_POINTER PTR_MPI3_IO_UNIT_PAGE9, + Mpi3IOUnitPage9_t, MPI3_POINTER pMpi3IOUnitPage9_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOUNIT9_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_IOUNIT9_FLAGS_VDFIRST_ENABLED (0x01) + +/**** Defines for the FirstDevice field ****/ +#define MPI3_IOUNIT9_FIRSTDEVICE_UNKNOWN (0xFFFF) + +/***************************************************************************** + * IOC Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * IOC Page 0 * + ****************************************************************************/ +typedef struct _MPI3_IOC_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U16 VendorID; /* 0x0C */ + U16 DeviceID; /* 0x0E */ + U8 RevisionID; /* 0x10 */ + U8 Reserved11[3]; /* 0x11 */ + U32 ClassCode; /* 0x14 */ + U16 SubsystemVendorID; /* 0x18 */ + U16 SubsystemID; /* 0x1A */ +} MPI3_IOC_PAGE0, MPI3_POINTER PTR_MPI3_IOC_PAGE0, + Mpi3IOCPage0_t, MPI3_POINTER pMpi3IOCPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOC0_PAGEVERSION (0x00) + +/***************************************************************************** + * IOC Page 1 * + ****************************************************************************/ +typedef struct _MPI3_IOC_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 CoalescingTimeout; /* 0x08 */ + U8 CoalescingDepth; /* 0x0C */ + U8 PCISlotNum; /* 0x0D */ + U16 Reserved0E; /* 0x0E */ +} MPI3_IOC_PAGE1, MPI3_POINTER PTR_MPI3_IOC_PAGE1, + Mpi3IOCPage1_t, MPI3_POINTER pMpi3IOCPage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOC1_PAGEVERSION (0x00) + +/**** Defines for the PCISlotNum field ****/ +#define MPI3_IOC1_PCISLOTNUM_UNKNOWN (0xFF) + +/***************************************************************************** + * IOC Page 2 * + ****************************************************************************/ +#ifndef MPI3_IOC2_EVENTMASK_WORDS +#define MPI3_IOC2_EVENTMASK_WORDS (4) +#endif /* MPI3_IOC2_EVENTMASK_WORDS */ + +typedef struct _MPI3_IOC_PAGE2 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U16 SASBroadcastPrimitiveMasks; /* 0x0C */ + U16 SASNotifyPrimitiveMasks; /* 0x0E */ + U32 EventMasks[MPI3_IOC2_EVENTMASK_WORDS]; /* 0x10 */ +} MPI3_IOC_PAGE2, MPI3_POINTER PTR_MPI3_IOC_PAGE2, + Mpi3IOCPage2_t, MPI3_POINTER pMpi3IOCPage2_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_IOC2_PAGEVERSION (0x00) + + +/***************************************************************************** + * UEFI BSD and HII Configuration Pages * + ****************************************************************************/ +typedef struct _MPI3_UEFIBSD_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 BSDOptions; /* 0x08 */ + U8 SSUTimeout; /* 0x0C */ + U8 IOTimeout; /* 0x0D */ + U8 TURRetries; /* 0x0E */ + U8 TURInterval; /* 0x0F */ + U8 Reserved10; /* 0x10 */ + U8 SecurityKeyTimeout; /* 0x11 */ + U16 Reserved12; /* 0x12 */ + U32 Reserved14; /* 0x14 */ + U32 Reserved18; /* 0x18 */ +} MPI3_UEFIBSD_PAGE0, MPI3_POINTER PTR_MPI3_UEFIBSD_PAGE0, + Mpi3UefiBsdPage0_t, MPI3_POINTER pMpi3UefiBsdPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_UEFIBSD_PAGEVERSION (0x00) + +/**** Defines for the BSDOptions field ****/ +#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_MASK (0x00000003) +#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_AND_DEVS (0x00000000) +#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_IOC_ONLY (0x00000001) +#define MPI3_UEFIBSD_BSDOPTS_REGISTRATION_NONE (0x00000002) +#define MPI3_UEFIBSD_BSDOPTS_DIS_HII_CONFIG_UTIL (0x00000004) +#define MPI3_UEFIBSD_BSDOPTS_EN_ADV_ADAPTER_CONFIG (0x00000008) + + +/***************************************************************************** + * Security Configuration Pages * + ****************************************************************************/ + +typedef union _MPI3_SECURITY_MAC { + U32 Dword[16]; + U16 Word[32]; + U8 Byte[64]; +} MPI3_SECURITY_MAC, MPI3_POINTER PTR_MPI3_SECURITY_MAC, + Mpi3SecurityMAC_t, MPI3_POINTER pMpi3SecurityMAC_t; + +typedef union _MPI3_SECURITY_NONCE { + U32 Dword[16]; + U16 Word[32]; + U8 Byte[64]; +} MPI3_SECURITY_NONCE, MPI3_POINTER PTR_MPI3_SECURITY_NONCE, + Mpi3SecurityNonce_t, MPI3_POINTER pMpi3SecurityNonce_t; + +/***************************************************************************** + * Security Page 0 * + ****************************************************************************/ + +typedef union _MPI3_SECURITY0_CERT_CHAIN { + U32 Dword[1024]; + U16 Word[2048]; + U8 Byte[4096]; +} MPI3_SECURITY0_CERT_CHAIN, MPI3_POINTER PTR_MPI3_SECURITY0_CERT_CHAIN, + Mpi3Security0CertChain_t, MPI3_POINTER pMpi3Security0CertChain_t; + +typedef struct _MPI3_SECURITY_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 SlotNumGroup; /* 0x08 */ + U8 SlotNum; /* 0x09 */ + U16 CertChainLength; /* 0x0A */ + U8 CertChainFlags; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + U32 BaseAsymAlgo; /* 0x10 */ + U32 BaseHashAlgo; /* 0x14 */ + U32 Reserved18[4]; /* 0x18 */ + MPI3_SECURITY_MAC MAC; /* 0x28 */ + MPI3_SECURITY_NONCE Nonce; /* 0x68 */ + MPI3_SECURITY0_CERT_CHAIN CertificateChain; /* 0xA8 */ +} MPI3_SECURITY_PAGE0, MPI3_POINTER PTR_MPI3_SECURITY_PAGE0, + Mpi3SecurityPage0_t, MPI3_POINTER pMpi3SecurityPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SECURITY0_PAGEVERSION (0x00) + +/**** Defines for the CertChainFlags field ****/ +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_MASK (0x0E) +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_UNUSED (0x00) +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_CERBERUS (0x02) +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_AUTH_API_SPDM (0x04) +#define MPI3_SECURITY0_CERTCHAIN_FLAGS_SEALED (0x01) + +/***************************************************************************** + * Security Page 1 * + ****************************************************************************/ + +#ifndef MPI3_SECURITY1_KEY_RECORD_MAX +#define MPI3_SECURITY1_KEY_RECORD_MAX 1 +#endif /* MPI3_SECURITY1_KEY_RECORD_MAX */ + +#ifndef MPI3_SECURITY1_PAD_MAX +#define MPI3_SECURITY1_PAD_MAX 1 +#endif /* MPI3_SECURITY1_PAD_MAX */ + +typedef union _MPI3_SECURITY1_KEY_DATA { + U32 Dword[128]; + U16 Word[256]; + U8 Byte[512]; +} MPI3_SECURITY1_KEY_DATA, MPI3_POINTER PTR_MPI3_SECURITY1_KEY_DATA, + Mpi3Security1KeyData_t, MPI3_POINTER pMpi3Security1KeyData_t; + +typedef struct _MPI3_SECURITY1_KEY_RECORD { + U8 Flags; /* 0x00 */ + U8 Consumer; /* 0x01 */ + U16 KeyDataSize; /* 0x02 */ + U32 AdditionalKeyData; /* 0x04 */ + U32 Reserved08[2]; /* 0x08 */ + MPI3_SECURITY1_KEY_DATA KeyData; /* 0x10 */ +} MPI3_SECURITY1_KEY_RECORD, MPI3_POINTER PTR_MPI3_SECURITY1_KEY_RECORD, + Mpi3Security1KeyRecord_t, MPI3_POINTER pMpi3Security1KeyRecord_t; + +/**** Defines for the Flags field ****/ +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_MASK (0x1F) +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_NOT_VALID (0x00) +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_HMAC (0x01) +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_AES (0x02) +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PRIVATE (0x03) +#define MPI3_SECURITY1_KEY_RECORD_FLAGS_TYPE_ECDSA_PUBLIC (0x04) + +/**** Defines for the Consumer field ****/ +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_NOT_VALID (0x00) +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_SAFESTORE (0x01) +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CERT_CHAIN (0x02) +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_AUTH_DEV_KEY (0x03) +#define MPI3_SECURITY1_KEY_RECORD_CONSUMER_CACHE_OFFLOAD (0x04) + +typedef struct _MPI3_SECURITY_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08[2]; /* 0x08 */ + MPI3_SECURITY_MAC MAC; /* 0x10 */ + MPI3_SECURITY_NONCE Nonce; /* 0x50 */ + U8 NumKeys; /* 0x90 */ + U8 Reserved91[3]; /* 0x91 */ + U32 Reserved94[3]; /* 0x94 */ + MPI3_SECURITY1_KEY_RECORD KeyRecord[MPI3_SECURITY1_KEY_RECORD_MAX]; /* 0xA0 */ + U8 Pad[MPI3_SECURITY1_PAD_MAX]; /* ?? */ +} MPI3_SECURITY_PAGE1, MPI3_POINTER PTR_MPI3_SECURITY_PAGE1, + Mpi3SecurityPage1_t, MPI3_POINTER pMpi3SecurityPage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SECURITY1_PAGEVERSION (0x00) + +/***************************************************************************** + * SAS IO Unit Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * SAS IO Unit Page 0 * + ****************************************************************************/ +typedef struct _MPI3_SAS_IO_UNIT0_PHY_DATA { + U8 IOUnitPort; /* 0x00 */ + U8 PortFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 NegotiatedLinkRate; /* 0x03 */ + U16 ControllerPhyDeviceInfo; /* 0x04 */ + U16 Reserved06; /* 0x06 */ + U16 AttachedDevHandle; /* 0x08 */ + U16 ControllerDevHandle; /* 0x0A */ + U32 DiscoveryStatus; /* 0x0C */ + U32 Reserved10; /* 0x10 */ +} MPI3_SAS_IO_UNIT0_PHY_DATA, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT0_PHY_DATA, + Mpi3SasIOUnit0PhyData_t, MPI3_POINTER pMpi3SasIOUnit0PhyData_t; + +#ifndef MPI3_SAS_IO_UNIT0_PHY_MAX +#define MPI3_SAS_IO_UNIT0_PHY_MAX (1) +#endif /* MPI3_SAS_IO_UNIT0_PHY_MAX */ + +typedef struct _MPI3_SAS_IO_UNIT_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumPhys; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_SAS_IO_UNIT0_PHY_DATA PhyData[MPI3_SAS_IO_UNIT0_PHY_MAX]; /* 0x10 */ +} MPI3_SAS_IO_UNIT_PAGE0, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE0, + Mpi3SasIOUnitPage0_t, MPI3_POINTER pMpi3SasIOUnitPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASIOUNIT0_PAGEVERSION (0x00) + +/**** Defines for the PortFlags field ****/ +#define MPI3_SASIOUNIT0_PORTFLAGS_DISC_IN_PROGRESS (0x08) +#define MPI3_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) + +/**** Defines for the PhyFlags field ****/ +#define MPI3_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) +#define MPI3_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) +#define MPI3_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) + +/**** Use MPI3_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field ****/ + +/**** Use MPI3_SAS_DEVICE_INFO_ defines (see mpi30_sas.h) for the ControllerPhyDeviceInfo field ****/ + +/**** Use MPI3_SAS_DISC_STATUS_ defines (see mpi30_ioc.h) for the DiscoveryStatus field ****/ + +/***************************************************************************** + * SAS IO Unit Page 1 * + ****************************************************************************/ +typedef struct _MPI3_SAS_IO_UNIT1_PHY_DATA { + U8 IOUnitPort; /* 0x00 */ + U8 PortFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 MaxMinLinkRate; /* 0x03 */ + U16 ControllerPhyDeviceInfo; /* 0x04 */ + U16 MaxTargetPortConnectTime; /* 0x06 */ + U32 Reserved08; /* 0x08 */ +} MPI3_SAS_IO_UNIT1_PHY_DATA, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT1_PHY_DATA, + Mpi3SasIOUnit1PhyData_t, MPI3_POINTER pMpi3SasIOUnit1PhyData_t; + +#ifndef MPI3_SAS_IO_UNIT1_PHY_MAX +#define MPI3_SAS_IO_UNIT1_PHY_MAX (1) +#endif /* MPI3_SAS_IO_UNIT1_PHY_MAX */ + +typedef struct _MPI3_SAS_IO_UNIT_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 ControlFlags; /* 0x08 */ + U16 SASNarrowMaxQueueDepth; /* 0x0A */ + U16 AdditionalControlFlags; /* 0x0C */ + U16 SASWideMaxQueueDepth; /* 0x0E */ + U8 NumPhys; /* 0x10 */ + U8 SATAMaxQDepth; /* 0x11 */ + U16 Reserved12; /* 0x12 */ + MPI3_SAS_IO_UNIT1_PHY_DATA PhyData[MPI3_SAS_IO_UNIT1_PHY_MAX]; /* 0x14 */ +} MPI3_SAS_IO_UNIT_PAGE1, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE1, + Mpi3SasIOUnitPage1_t, MPI3_POINTER pMpi3SasIOUnitPage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASIOUNIT1_PAGEVERSION (0x00) + +/**** Defines for the ControlFlags field ****/ +#define MPI3_SASIOUNIT1_CONTROL_CONTROLLER_DEVICE_SELF_TEST (0x8000) +#define MPI3_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) +#define MPI3_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) +#define MPI3_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) +#define MPI3_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) +#define MPI3_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) +#define MPI3_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) +#define MPI3_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) +#define MPI3_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) +#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_MASK (0x0001) +#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_DEVICE_NAME (0x0000) +#define MPI3_SASIOUNIT1_CONTROL_HARD_RESET_SAS_ADDRESS (0x0001) + +/**** Defines for the AdditionalControlFlags field ****/ +#define MPI3_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100) +#define MPI3_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) +#define MPI3_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) +#define MPI3_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) +#define MPI3_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) +#define MPI3_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) +#define MPI3_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) +#define MPI3_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) +#define MPI3_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) + +/**** Defines for the PortFlags field ****/ +#define MPI3_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) + +/**** Defines for the PhyFlags field ****/ +#define MPI3_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40) +#define MPI3_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20) +#define MPI3_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) + +/**** Defines for the MaxMinLinkRate field ****/ +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_MASK (0xF0) +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_SHIFT (4) +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_6_0 (0xA0) +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_12_0 (0xB0) +#define MPI3_SASIOUNIT1_MMLR_MAX_RATE_22_5 (0xC0) +#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_MASK (0x0F) +#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_6_0 (0x0A) +#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_12_0 (0x0B) +#define MPI3_SASIOUNIT1_MMLR_MIN_RATE_22_5 (0x0C) + +/**** Use MPI3_SAS_DEVICE_INFO_ defines (see mpi30_sas.h) for the ControllerPhyDeviceInfo field ****/ + +/***************************************************************************** + * SAS IO Unit Page 2 * + ****************************************************************************/ +typedef struct _MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS { + U8 ControlFlags; /* 0x00 */ + U8 Reserved01; /* 0x01 */ + U16 InactivityTimerExponent; /* 0x02 */ + U8 SATAPartialTimeout; /* 0x04 */ + U8 Reserved05; /* 0x05 */ + U8 SATASlumberTimeout; /* 0x06 */ + U8 Reserved07; /* 0x07 */ + U8 SASPartialTimeout; /* 0x08 */ + U8 Reserved09; /* 0x09 */ + U8 SASSlumberTimeout; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ +} MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS, + Mpi3SasIOUnit2PhyPmSettings_t, MPI3_POINTER pMpi3SasIOUnit2PhyPmSettings_t; + +#ifndef MPI3_SAS_IO_UNIT2_PHY_MAX +#define MPI3_SAS_IO_UNIT2_PHY_MAX (1) +#endif /* MPI3_SAS_IO_UNIT2_PHY_MAX */ + +typedef struct _MPI3_SAS_IO_UNIT_PAGE2 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x08 */ + U8 Reserved09[3]; /* 0x09 */ + U32 Reserved0C; /* 0x0C */ + MPI3_SAS_IO_UNIT2_PHY_PM_SETTINGS SASPhyPowerManagementSettings[MPI3_SAS_IO_UNIT2_PHY_MAX]; /* 0x10 */ +} MPI3_SAS_IO_UNIT_PAGE2, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE2, + Mpi3SasIOUnitPage2_t, MPI3_POINTER pMpi3SasIOUnitPage2_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASIOUNIT2_PAGEVERSION (0x00) + +/**** Defines for the ControlFlags field ****/ +#define MPI3_SASIOUNIT2_CONTROL_SAS_SLUMBER_ENABLE (0x08) +#define MPI3_SASIOUNIT2_CONTROL_SAS_PARTIAL_ENABLE (0x04) +#define MPI3_SASIOUNIT2_CONTROL_SATA_SLUMBER_ENABLE (0x02) +#define MPI3_SASIOUNIT2_CONTROL_SATA_PARTIAL_ENABLE (0x01) + +/**** Defines for the InactivityTimerExponent field ****/ +#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_MASK (0x7000) +#define MPI3_SASIOUNIT2_ITE_SAS_SLUMBER_SHIFT (12) +#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_MASK (0x0700) +#define MPI3_SASIOUNIT2_ITE_SAS_PARTIAL_SHIFT (8) +#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_MASK (0x0070) +#define MPI3_SASIOUNIT2_ITE_SATA_SLUMBER_SHIFT (4) +#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_MASK (0x0007) +#define MPI3_SASIOUNIT2_ITE_SATA_PARTIAL_SHIFT (0) + +#define MPI3_SASIOUNIT2_ITE_EXP_TEN_SECONDS (7) +#define MPI3_SASIOUNIT2_ITE_EXP_ONE_SECOND (6) +#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MILLISECONDS (5) +#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MILLISECONDS (4) +#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MILLISECOND (3) +#define MPI3_SASIOUNIT2_ITE_EXP_HUNDRED_MICROSECONDS (2) +#define MPI3_SASIOUNIT2_ITE_EXP_TEN_MICROSECONDS (1) +#define MPI3_SASIOUNIT2_ITE_EXP_ONE_MICROSECOND (0) + +/***************************************************************************** + * SAS IO Unit Page 3 * + ****************************************************************************/ +typedef struct _MPI3_SAS_IO_UNIT_PAGE3 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U32 PowerManagementCapabilities; /* 0x0C */ +} MPI3_SAS_IO_UNIT_PAGE3, MPI3_POINTER PTR_MPI3_SAS_IO_UNIT_PAGE3, + Mpi3SasIOUnitPage3_t, MPI3_POINTER pMpi3SasIOUnitPage3_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASIOUNIT3_PAGEVERSION (0x00) + +/**** Defines for the PowerManagementCapabilities field ****/ +#define MPI3_SASIOUNIT3_PM_HOST_SAS_SLUMBER_MODE (0x00000800) +#define MPI3_SASIOUNIT3_PM_HOST_SAS_PARTIAL_MODE (0x00000400) +#define MPI3_SASIOUNIT3_PM_HOST_SATA_SLUMBER_MODE (0x00000200) +#define MPI3_SASIOUNIT3_PM_HOST_SATA_PARTIAL_MODE (0x00000100) +#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) +#define MPI3_SASIOUNIT3_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) +#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) +#define MPI3_SASIOUNIT3_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) + + +/***************************************************************************** + * SAS Expander Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * SAS Expander Page 0 * + ****************************************************************************/ +typedef struct _MPI3_SAS_EXPANDER_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 IOUnitPort; /* 0x08 */ + U8 ReportGenLength; /* 0x09 */ + U16 EnclosureHandle; /* 0x0A */ + U32 Reserved0C; /* 0x0C */ + U64 SASAddress; /* 0x10 */ + U32 DiscoveryStatus; /* 0x18 */ + U16 DevHandle; /* 0x1C */ + U16 ParentDevHandle; /* 0x1E */ + U16 ExpanderChangeCount; /* 0x20 */ + U16 ExpanderRouteIndexes; /* 0x22 */ + U8 NumPhys; /* 0x24 */ + U8 SASLevel; /* 0x25 */ + U16 Flags; /* 0x26 */ + U16 STPBusInactivityTimeLimit; /* 0x28 */ + U16 STPMaxConnectTimeLimit; /* 0x2A */ + U16 STP_SMP_NexusLossTime; /* 0x2C */ + U16 MaxNumRoutedSASAddresses; /* 0x2E */ + U64 ActiveZoneManagerSASAddress; /* 0x30 */ + U16 ZoneLockInactivityLimit; /* 0x38 */ + U16 Reserved3A; /* 0x3A */ + U8 TimeToReducedFunc; /* 0x3C */ + U8 InitialTimeToReducedFunc; /* 0x3D */ + U8 MaxReducedFuncTime; /* 0x3E */ + U8 ExpStatus; /* 0x3F */ +} MPI3_SAS_EXPANDER_PAGE0, MPI3_POINTER PTR_MPI3_SAS_EXPANDER_PAGE0, + Mpi3SasExpanderPage0_t, MPI3_POINTER pMpi3SasExpanderPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASEXPANDER0_PAGEVERSION (0x00) + +/**** Use MPI3_SAS_DISC_STATUS_ defines (see mpi30_ioc.h) for the DiscoveryStatus field ****/ + +/**** Defines for the Flags field ****/ +#define MPI3_SASEXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000) +#define MPI3_SASEXPANDER0_FLAGS_ZONE_LOCKED (0x1000) +#define MPI3_SASEXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) +#define MPI3_SASEXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) +#define MPI3_SASEXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) +#define MPI3_SASEXPANDER0_FLAGS_ENABLED_ZONING (0x0100) +#define MPI3_SASEXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) +#define MPI3_SASEXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) +#define MPI3_SASEXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) +#define MPI3_SASEXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) +#define MPI3_SASEXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) + +/**** Defines for the ExpStatus field ****/ +#define MPI3_SASEXPANDER0_ES_NOT_RESPONDING (0x02) +#define MPI3_SASEXPANDER0_ES_RESPONDING (0x03) +#define MPI3_SASEXPANDER0_ES_DELAY_NOT_RESPONDING (0x04) + +/***************************************************************************** + * SAS Expander Page 1 * + ****************************************************************************/ +typedef struct _MPI3_SAS_EXPANDER_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 IOUnitPort; /* 0x08 */ + U8 Reserved09[3]; /* 0x09 */ + U8 NumPhys; /* 0x0C */ + U8 Phy; /* 0x0D */ + U16 NumTableEntriesProgrammed; /* 0x0E */ + U8 ProgrammedLinkRate; /* 0x10 */ + U8 HwLinkRate; /* 0x11 */ + U16 AttachedDevHandle; /* 0x12 */ + U32 PhyInfo; /* 0x14 */ + U16 AttachedDeviceInfo; /* 0x18 */ + U16 Reserved1A; /* 0x1A */ + U16 ExpanderDevHandle; /* 0x1C */ + U8 ChangeCount; /* 0x1E */ + U8 NegotiatedLinkRate; /* 0x1F */ + U8 PhyIdentifier; /* 0x20 */ + U8 AttachedPhyIdentifier; /* 0x21 */ + U8 Reserved22; /* 0x22 */ + U8 DiscoveryInfo; /* 0x23 */ + U32 AttachedPhyInfo; /* 0x24 */ + U8 ZoneGroup; /* 0x28 */ + U8 SelfConfigStatus; /* 0x29 */ + U16 Reserved2A; /* 0x2A */ + U16 Slot; /* 0x2C */ + U16 SlotIndex; /* 0x2E */ +} MPI3_SAS_EXPANDER_PAGE1, MPI3_POINTER PTR_MPI3_SAS_EXPANDER_PAGE1, + Mpi3SasExpanderPage1_t, MPI3_POINTER pMpi3SasExpanderPage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASEXPANDER1_PAGEVERSION (0x00) + +/**** Defines for the ProgrammedLinkRate field - use MPI3_SAS_PRATE_ defines ****/ + +/**** Defines for the HwLinkRate field - use MPI3_SAS_HWRATE_ defines ****/ + +/**** Defines for the PhyInfo field - use MPI3_SAS_PHYINFO_ defines ****/ + +/**** Defines for the AttachedDeviceInfo field - use MPI3_SAS_DEVICE_INFO_ defines ****/ + +/**** Defines for the NegotiatedLinkRate field - use MPI3_SAS_NEG_LINK_RATE_ defines ****/ + +/**** Defines for the DiscoveryInfo field ****/ +#define MPI3_SASEXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) +#define MPI3_SASEXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) +#define MPI3_SASEXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) + +/**** Defines for the AttachedPhyInfo field - use MPI3_SAS_APHYINFO_ defines ****/ + +/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/ + +/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ ****/ + + +/***************************************************************************** + * SAS Port Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * SAS Port Page 0 * + ****************************************************************************/ +typedef struct _MPI3_SAS_PORT_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 PortNumber; /* 0x08 */ + U8 Reserved09; /* 0x09 */ + U8 PortWidth; /* 0x0A */ + U8 Reserved0B; /* 0x0B */ + U8 ZoneGroup; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + U64 SASAddress; /* 0x10 */ + U16 DeviceInfo; /* 0x18 */ + U16 Reserved1A; /* 0x1A */ + U32 Reserved1C; /* 0x1C */ +} MPI3_SAS_PORT_PAGE0, MPI3_POINTER PTR_MPI3_SAS_PORT_PAGE0, + Mpi3SasPortPage0, MPI3_POINTER pMpi3SasPortPage0; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASPORT0_PAGEVERSION (0x00) + +/**** Defines for the DeviceInfo field - use MPI3_SAS_DEVICE_INFO_ defines ****/ + +/***************************************************************************** + * SAS PHY Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * SAS PHY Page 0 * + ****************************************************************************/ +typedef struct _MPI3_SAS_PHY_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 OwnerDevHandle; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U16 AttachedDevHandle; /* 0x0C */ + U8 AttachedPhyIdentifier; /* 0x0E */ + U8 Reserved0F; /* 0x0F */ + U32 AttachedPhyInfo; /* 0x10 */ + U8 ProgrammedLinkRate; /* 0x14 */ + U8 HwLinkRate; /* 0x15 */ + U8 ChangeCount; /* 0x16 */ + U8 Flags; /* 0x17 */ + U32 PhyInfo; /* 0x18 */ + U8 NegotiatedLinkRate; /* 0x1C */ + U8 Reserved1D[3]; /* 0x1D */ + U16 Slot; /* 0x20 */ + U16 SlotIndex; /* 0x22 */ +} MPI3_SAS_PHY_PAGE0, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE0, + Mpi3SasPhyPage0_t, MPI3_POINTER pMpi3SasPhyPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASPHY0_PAGEVERSION (0x00) + +/**** Defines for the AttachedPhyInfo field - use MPI3_SAS_APHYINFO_ defines ****/ + +/**** Defines for the ProgrammedLinkRate field - use MPI3_SAS_PRATE_ defines ****/ + +/**** Defines for the HwLinkRate field - use MPI3_SAS_HWRATE_ defines ****/ + +/**** Defines for the Flags field ****/ +#define MPI3_SASPHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) + +/**** Defines for the PhyInfo field - use MPI3_SAS_PHYINFO_ defines ****/ + +/**** Defines for the NegotiatedLinkRate field - use MPI3_SAS_NEG_LINK_RATE_ defines ****/ + +/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/ + +/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ ****/ + +/***************************************************************************** + * SAS PHY Page 1 * + ****************************************************************************/ +typedef struct _MPI3_SAS_PHY_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U32 InvalidDwordCount; /* 0x0C */ + U32 RunningDisparityErrorCount; /* 0x10 */ + U32 LossDwordSynchCount; /* 0x14 */ + U32 PhyResetProblemCount; /* 0x18 */ +} MPI3_SAS_PHY_PAGE1, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE1, + Mpi3SasPhyPage1_t, MPI3_POINTER pMpi3SasPhyPage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASPHY1_PAGEVERSION (0x00) + +/***************************************************************************** + * SAS PHY Page 2 * + ****************************************************************************/ +typedef struct _MPI3_SAS_PHY2_PHY_EVENT { + U8 PhyEventCode; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U32 PhyEventInfo; /* 0x04 */ +} MPI3_SAS_PHY2_PHY_EVENT, MPI3_POINTER PTR_MPI3_SAS_PHY2_PHY_EVENT, + Mpi3SasPhy2PhyEvent_t, MPI3_POINTER pMpi3SasPhy2PhyEvent_t; + +/**** Defines for the PhyEventCode field - use MPI3_SASPHY3_EVENT_CODE_ defines */ + +#ifndef MPI3_SAS_PHY2_PHY_EVENT_MAX +#define MPI3_SAS_PHY2_PHY_EVENT_MAX (1) +#endif /* MPI3_SAS_PHY2_PHY_EVENT_MAX */ + +typedef struct _MPI3_SAS_PHY_PAGE2 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumPhyEvents; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_SAS_PHY2_PHY_EVENT PhyEvent[MPI3_SAS_PHY2_PHY_EVENT_MAX]; /* 0x10 */ +} MPI3_SAS_PHY_PAGE2, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE2, + Mpi3SasPhyPage2_t, MPI3_POINTER pMpi3SasPhyPage2_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASPHY2_PAGEVERSION (0x00) + +/***************************************************************************** + * SAS PHY Page 3 * + ****************************************************************************/ +typedef struct _MPI3_SAS_PHY3_PHY_EVENT_CONFIG { + U8 PhyEventCode; /* 0x00 */ + U8 Reserved01[3]; /* 0x01 */ + U8 CounterType; /* 0x04 */ + U8 ThresholdWindow; /* 0x05 */ + U8 TimeUnits; /* 0x06 */ + U8 Reserved07; /* 0x07 */ + U32 EventThreshold; /* 0x08 */ + U16 ThresholdFlags; /* 0x0C */ + U16 Reserved0E; /* 0x0E */ +} MPI3_SAS_PHY3_PHY_EVENT_CONFIG, MPI3_POINTER PTR_MPI3_SAS_PHY3_PHY_EVENT_CONFIG, + Mpi3SasPhy3PhyEventConfig_t, MPI3_POINTER pMpi3SasPhy3PhyEventConfig_t; + +/**** Defines for the PhyEventCode field ****/ +#define MPI3_SASPHY3_EVENT_CODE_NO_EVENT (0x00) +#define MPI3_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01) +#define MPI3_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02) +#define MPI3_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03) +#define MPI3_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04) +#define MPI3_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05) +#define MPI3_SASPHY3_EVENT_CODE_RX_ERROR (0x06) +#define MPI3_SASPHY3_EVENT_CODE_INV_SPL_PACKETS (0x07) +#define MPI3_SASPHY3_EVENT_CODE_LOSS_SPL_PACKET_SYNC (0x08) +#define MPI3_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20) +#define MPI3_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21) +#define MPI3_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22) +#define MPI3_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23) +#define MPI3_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24) +#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25) +#define MPI3_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26) +#define MPI3_SASPHY3_EVENT_CODE_TX_BREAK (0x27) +#define MPI3_SASPHY3_EVENT_CODE_RX_BREAK (0x28) +#define MPI3_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29) +#define MPI3_SASPHY3_EVENT_CODE_CONNECTION (0x2A) +#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B) +#define MPI3_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C) +#define MPI3_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D) +#define MPI3_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E) +#define MPI3_SASPHY3_EVENT_CODE_PERSIST_CONN (0x2F) +#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40) +#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41) +#define MPI3_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42) +#define MPI3_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43) +#define MPI3_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44) +#define MPI3_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45) +#define MPI3_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50) +#define MPI3_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51) +#define MPI3_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52) +#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60) +#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61) +#define MPI3_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63) +#define MPI3_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0) +#define MPI3_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1) +#define MPI3_SASPHY3_EVENT_CODE_RX_AIP (0xD2) +#define MPI3_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3) +#define MPI3_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4) +#define MPI3_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5) +#define MPI3_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6) +#define MPI3_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7) +#define MPI3_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8) +#define MPI3_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9) +#define MPI3_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA) +#define MPI3_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB) +#define MPI3_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC) + +/**** Defines for the CounterType field ****/ +#define MPI3_SASPHY3_COUNTER_TYPE_WRAPPING (0x00) +#define MPI3_SASPHY3_COUNTER_TYPE_SATURATING (0x01) +#define MPI3_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02) + +/**** Defines for the TimeUnits field ****/ +#define MPI3_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00) +#define MPI3_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01) +#define MPI3_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02) +#define MPI3_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03) + +/**** Defines for the ThresholdFlags field ****/ +#define MPI3_SASPHY3_TFLAGS_PHY_RESET (0x0002) +#define MPI3_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) + +#ifndef MPI3_SAS_PHY3_PHY_EVENT_MAX +#define MPI3_SAS_PHY3_PHY_EVENT_MAX (1) +#endif /* MPI3_SAS_PHY3_PHY_EVENT_MAX */ + +typedef struct _MPI3_SAS_PHY_PAGE3 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumPhyEvents; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ + MPI3_SAS_PHY3_PHY_EVENT_CONFIG PhyEventConfig[MPI3_SAS_PHY3_PHY_EVENT_MAX]; /* 0x10 */ +} MPI3_SAS_PHY_PAGE3, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE3, + Mpi3SasPhyPage3_t, MPI3_POINTER pMpi3SasPhyPage3_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASPHY3_PAGEVERSION (0x00) + +/***************************************************************************** + * SAS PHY Page 4 * + ****************************************************************************/ +typedef struct _MPI3_SAS_PHY_PAGE4 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 Reserved08[3]; /* 0x08 */ + U8 Flags; /* 0x0B */ + U8 InitialFrame[28]; /* 0x0C */ +} MPI3_SAS_PHY_PAGE4, MPI3_POINTER PTR_MPI3_SAS_PHY_PAGE4, + Mpi3SasPhyPage4_t, MPI3_POINTER pMpi3SasPhyPage4_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_SASPHY4_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_SASPHY4_FLAGS_FRAME_VALID (0x02) +#define MPI3_SASPHY4_FLAGS_SATA_FRAME (0x01) + + +/***************************************************************************** + * Common definitions used by PCIe Configuration Pages * + ****************************************************************************/ + +/**** Defines for Negotiated Link Rates ****/ +#define MPI3_PCIE_LINK_RETIMERS_MASK (0x30) +#define MPI3_PCIE_LINK_RETIMERS_SHIFT (4) +#define MPI3_PCIE_NEG_LINK_RATE_MASK (0x0F) +#define MPI3_PCIE_NEG_LINK_RATE_UNKNOWN (0x00) +#define MPI3_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI3_PCIE_NEG_LINK_RATE_2_5 (0x02) +#define MPI3_PCIE_NEG_LINK_RATE_5_0 (0x03) +#define MPI3_PCIE_NEG_LINK_RATE_8_0 (0x04) +#define MPI3_PCIE_NEG_LINK_RATE_16_0 (0x05) +#define MPI3_PCIE_NEG_LINK_RATE_32_0 (0x06) + +/***************************************************************************** + * PCIe IO Unit Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * PCIe IO Unit Page 0 * + ****************************************************************************/ +typedef struct _MPI3_PCIE_IO_UNIT0_PHY_DATA { + U8 Link; /* 0x00 */ + U8 LinkFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 NegotiatedLinkRate; /* 0x03 */ + U16 AttachedDevHandle; /* 0x04 */ + U16 ControllerDevHandle; /* 0x06 */ + U32 EnumerationStatus; /* 0x08 */ + U8 IOUnitPort; /* 0x0C */ + U8 Reserved0D[3]; /* 0x0D */ +} MPI3_PCIE_IO_UNIT0_PHY_DATA, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT0_PHY_DATA, + Mpi3PcieIOUnit0PhyData_t, MPI3_POINTER pMpi3PcieIOUnit0PhyData_t; + +/**** Defines for the LinkFlags field ****/ +#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_MASK (0x10) +#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_IOUNIT1 (0x00) +#define MPI3_PCIEIOUNIT0_LINKFLAGS_CONFIG_SOURCE_BKPLANE (0x10) +#define MPI3_PCIEIOUNIT0_LINKFLAGS_ENUM_IN_PROGRESS (0x08) + +/**** Defines for the PhyFlags field ****/ +#define MPI3_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) +#define MPI3_PCIEIOUNIT0_PHYFLAGS_HOST_PHY (0x01) + +/**** Defines for the NegotiatedLinkRate field - use MPI3_PCIE_NEG_LINK_RATE_ defines ****/ + +/**** Defines for the EnumerationStatus field ****/ +#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCH_DEPTH_EXCEEDED (0x80000000) +#define MPI3_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000) +#define MPI3_PCIEIOUNIT0_ES_MAX_ENDPOINTS_EXCEEDED (0x20000000) +#define MPI3_PCIEIOUNIT0_ES_INSUFFICIENT_RESOURCES (0x10000000) + +#ifndef MPI3_PCIE_IO_UNIT0_PHY_MAX +#define MPI3_PCIE_IO_UNIT0_PHY_MAX (1) +#endif /* MPI3_PCIE_IO_UNIT0_PHY_MAX */ + +typedef struct _MPI3_PCIE_IO_UNIT_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved08; /* 0x08 */ + U8 NumPhys; /* 0x0C */ + U8 InitStatus; /* 0x0D */ + U16 Reserved0E; /* 0x0E */ + MPI3_PCIE_IO_UNIT0_PHY_DATA PhyData[MPI3_PCIE_IO_UNIT0_PHY_MAX]; /* 0x10 */ +} MPI3_PCIE_IO_UNIT_PAGE0, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT_PAGE0, + Mpi3PcieIOUnitPage0_t, MPI3_POINTER pMpi3PcieIOUnitPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_PCIEIOUNIT0_PAGEVERSION (0x00) + +/**** Defines for the InitStatus field ****/ +#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_ERRORS (0x00) +#define MPI3_PCIEIOUNIT0_INITSTATUS_NEEDS_INITIALIZATION (0x01) +#define MPI3_PCIEIOUNIT0_INITSTATUS_NO_TARGETS_ALLOCATED (0x02) +#define MPI3_PCIEIOUNIT0_INITSTATUS_RESOURCE_ALLOC_FAILED (0x03) +#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_NUM_PHYS (0x04) +#define MPI3_PCIEIOUNIT0_INITSTATUS_UNSUPPORTED_CONFIG (0x05) +#define MPI3_PCIEIOUNIT0_INITSTATUS_HOST_PORT_MISMATCH (0x06) +#define MPI3_PCIEIOUNIT0_INITSTATUS_PHYS_NOT_CONSECUTIVE (0x07) +#define MPI3_PCIEIOUNIT0_INITSTATUS_BAD_CLOCKING_MODE (0x08) +#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_START (0xF0) +#define MPI3_PCIEIOUNIT0_INITSTATUS_PROD_SPEC_END (0xFF) + +/***************************************************************************** + * PCIe IO Unit Page 1 * + ****************************************************************************/ +typedef struct _MPI3_PCIE_IO_UNIT1_PHY_DATA { + U8 Link; /* 0x00 */ + U8 LinkFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 MaxMinLinkRate; /* 0x03 */ + U32 Reserved04; /* 0x04 */ + U32 Reserved08; /* 0x08 */ +} MPI3_PCIE_IO_UNIT1_PHY_DATA, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT1_PHY_DATA, + Mpi3PcieIOUnit1PhyData_t, MPI3_POINTER pMpi3PcieIOUnit1PhyData_t; + +/**** Defines for the LinkFlags field ****/ +#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_MASK (0x03) +#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_DIS_SEPARATE_REFCLK (0x00) +#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRIS (0x01) +#define MPI3_PCIEIOUNIT1_LINKFLAGS_PCIE_CLK_MODE_EN_SRNS (0x02) + +/**** Defines for the PhyFlags field ****/ +#define MPI3_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) + +/**** Defines for the MaxMinLinkRate ****/ +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_MASK (0xF0) +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_SHIFT (4) +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_2_5 (0x20) +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_5_0 (0x30) +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_8_0 (0x40) +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_16_0 (0x50) +#define MPI3_PCIEIOUNIT1_MMLR_MAX_RATE_32_0 (0x60) + +#ifndef MPI3_PCIE_IO_UNIT1_PHY_MAX +#define MPI3_PCIE_IO_UNIT1_PHY_MAX (1) +#endif /* MPI3_PCIE_IO_UNIT1_PHY_MAX */ + +typedef struct _MPI3_PCIE_IO_UNIT_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 ControlFlags; /* 0x08 */ + U32 Reserved0C; /* 0x0C */ + U8 NumPhys; /* 0x10 */ + U8 Reserved11; /* 0x11 */ + U16 Reserved12; /* 0x12 */ + MPI3_PCIE_IO_UNIT1_PHY_DATA PhyData[MPI3_PCIE_IO_UNIT1_PHY_MAX]; /* 0x14 */ +} MPI3_PCIE_IO_UNIT_PAGE1, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT_PAGE1, + Mpi3PcieIOUnitPage1_t, MPI3_POINTER pMpi3PcieIOUnitPage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_PCIEIOUNIT1_PAGEVERSION (0x00) + +/***************************************************************************** + * PCIe IO Unit Page 2 * + ****************************************************************************/ +typedef struct _MPI3_PCIE_IO_UNIT_PAGE2 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 NVMeMaxQueueDepth; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U8 NVMeAbortTO; /* 0x0C */ + U8 Reserved0D; /* 0x0D */ + U16 Reserved0E; /* 0x0E */ +} MPI3_PCIE_IO_UNIT_PAGE2, MPI3_POINTER PTR_MPI3_PCIE_IO_UNIT_PAGE2, + Mpi3PcieIOUnitPage2_t, MPI3_POINTER pMpi3PcieIOUnitPage2_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_PCIEIOUNIT2_PAGEVERSION (0x00) + +/***************************************************************************** + * PCIe Switch Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * PCIe Switch Page 0 * + ****************************************************************************/ +typedef struct _MPI3_PCIE_SWITCH_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 IOUnitPort; /* 0x08 */ + U8 SwitchStatus; /* 0x09 */ + U8 Reserved0A[2]; /* 0x0A */ + U16 DevHandle; /* 0x0C */ + U16 ParentDevHandle; /* 0x0E */ + U8 NumPorts; /* 0x10 */ + U8 PCIeLevel; /* 0x11 */ + U16 Reserved12; /* 0x12 */ + U32 Reserved14; /* 0x14 */ + U32 Reserved18; /* 0x18 */ + U32 Reserved1C; /* 0x1C */ +} MPI3_PCIE_SWITCH_PAGE0, MPI3_POINTER PTR_MPI3_PCIE_SWITCH_PAGE0, + Mpi3PcieSwitchPage0_t, MPI3_POINTER pMpi3PcieSwitchPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_PCIESWITCH0_PAGEVERSION (0x00) + +/**** Defines for the SwitchStatus field ****/ +#define MPI3_PCIESWITCH0_SS_NOT_RESPONDING (0x02) +#define MPI3_PCIESWITCH0_SS_RESPONDING (0x03) +#define MPI3_PCIESWITCH0_SS_DELAY_NOT_RESPONDING (0x04) + +/***************************************************************************** + * PCIe Switch Page 1 * + ****************************************************************************/ +typedef struct _MPI3_PCIE_SWITCH_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 IOUnitPort; /* 0x08 */ + U8 Reserved09[3]; /* 0x09 */ + U8 NumPorts; /* 0x0C */ + U8 PortNum; /* 0x0D */ + U16 AttachedDevHandle; /* 0x0E */ + U16 SwitchDevHandle; /* 0x10 */ + U8 NegotiatedPortWidth; /* 0x12 */ + U8 NegotiatedLinkRate; /* 0x13 */ + U16 Slot; /* 0x14 */ + U16 SlotIndex; /* 0x16 */ + U32 Reserved18; /* 0x18 */ +} MPI3_PCIE_SWITCH_PAGE1, MPI3_POINTER PTR_MPI3_PCIE_SWITCH_PAGE1, + Mpi3PcieSwitchPage1_t, MPI3_POINTER pMpi3PcieSwitchPage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_PCIESWITCH1_PAGEVERSION (0x00) + +/**** Defines for the NegotiatedLinkRate field - use MPI3_PCIE_NEG_LINK_RATE_ defines ****/ + +/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/ + +/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ ****/ + +/***************************************************************************** + * PCIe Link Configuration Pages * + ****************************************************************************/ +typedef struct _MPI3_PCIE_LINK_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 Link; /* 0x08 */ + U8 Reserved09[3]; /* 0x09 */ + U32 CorrectableErrorCount; /* 0x0C */ + U16 NFatalErrorCount; /* 0x10 */ + U16 Reserved12; /* 0x12 */ + U16 FatalErrorCount; /* 0x14 */ + U16 Reserved16; /* 0x16 */ +} MPI3_PCIE_LINK_PAGE0, MPI3_POINTER PTR_MPI3_PCIE_LINK_PAGE0, + Mpi3PcieLinkPage0_t, MPI3_POINTER pMpi3PcieLinkPage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_PCIELINK0_PAGEVERSION (0x00) + + +/***************************************************************************** + * Enclosure Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * Enclosure Page 0 * + ****************************************************************************/ +typedef struct _MPI3_ENCLOSURE_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U64 EnclosureLogicalID; /* 0x08 */ + U16 Flags; /* 0x10 */ + U16 EnclosureHandle; /* 0x12 */ + U16 NumSlots; /* 0x14 */ + U16 StartSlot; /* 0x16 */ + U8 IOUnitPort; /* 0x18 */ + U8 EnclosureLevel; /* 0x19 */ + U16 SEPDevHandle; /* 0x1A */ + U32 Reserved1C; /* 0x1C */ +} MPI3_ENCLOSURE_PAGE0, MPI3_POINTER PTR_MPI3_ENCLOSURE_PAGE0, + Mpi3EnclosurePage0_t, MPI3_POINTER pMpi3EnclosurePage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_ENCLOSURE0_PAGEVERSION (0x00) + +/**** Defines for the Flags field ****/ +#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_MASK (0xC000) +#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_VIRTUAL (0x0000) +#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_SAS (0x4000) +#define MPI3_ENCLS0_FLAGS_ENCL_TYPE_PCIE (0x8000) +#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT_MASK (0x0010) +#define MPI3_ENCLS0_FLAGS_ENCL_DEV_NOT_FOUND (0x0000) +#define MPI3_ENCLS0_FLAGS_ENCL_DEV_PRESENT (0x0010) +#define MPI3_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI3_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI3_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI3_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0002) + +/**** Defines for the PhysicalPort field - use MPI3_DEVICE0_PHYPORT_ defines ****/ + +/***************************************************************************** + * Device Configuration Pages * + ****************************************************************************/ + +/***************************************************************************** + * Common definitions used by Device Configuration Pages * + ****************************************************************************/ + +/**** Defines for the DeviceForm field ****/ +#define MPI3_DEVICE_DEVFORM_SAS_SATA (0x00) +#define MPI3_DEVICE_DEVFORM_PCIE (0x01) +#define MPI3_DEVICE_DEVFORM_VD (0x02) + +/***************************************************************************** + * Device Page 0 * + ****************************************************************************/ +typedef struct _MPI3_DEVICE0_SAS_SATA_FORMAT { + U64 SASAddress; /* 0x00 */ + U16 Flags; /* 0x08 */ + U16 DeviceInfo; /* 0x0A */ + U8 PhyNum; /* 0x0C */ + U8 AttachedPhyIdentifier; /* 0x0D */ + U8 MaxPortConnections; /* 0x0E */ + U8 ZoneGroup; /* 0x0F */ +} MPI3_DEVICE0_SAS_SATA_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_SAS_SATA_FORMAT, + Mpi3Device0SasSataFormat_t, MPI3_POINTER pMpi3Device0SasSataFormat_t; + +/**** Defines for the Flags field ****/ +#define MPI3_DEVICE0_SASSATA_FLAGS_SLUMBER_CAP (0x0200) +#define MPI3_DEVICE0_SASSATA_FLAGS_PARTIAL_CAP (0x0100) +#define MPI3_DEVICE0_SASSATA_FLAGS_ASYNC_NOTIFY (0x0080) +#define MPI3_DEVICE0_SASSATA_FLAGS_SW_PRESERVE (0x0040) +#define MPI3_DEVICE0_SASSATA_FLAGS_UNSUPP_DEV (0x0020) +#define MPI3_DEVICE0_SASSATA_FLAGS_48BIT_LBA (0x0010) +#define MPI3_DEVICE0_SASSATA_FLAGS_SMART_SUPP (0x0008) +#define MPI3_DEVICE0_SASSATA_FLAGS_NCQ_SUPP (0x0004) +#define MPI3_DEVICE0_SASSATA_FLAGS_FUA_SUPP (0x0002) +#define MPI3_DEVICE0_SASSATA_FLAGS_PERSIST_CAP (0x0001) + +/**** Defines for the DeviceInfo field - use MPI3_SAS_DEVICE_INFO_ defines (see mpi30_sas.h) ****/ + +typedef struct _MPI3_DEVICE0_PCIE_FORMAT { + U8 SupportedLinkRates; /* 0x00 */ + U8 MaxPortWidth; /* 0x01 */ + U8 NegotiatedPortWidth; /* 0x02 */ + U8 NegotiatedLinkRate; /* 0x03 */ + U8 PortNum; /* 0x04 */ + U8 ControllerResetTO; /* 0x05 */ + U16 DeviceInfo; /* 0x06 */ + U32 MaximumDataTransferSize; /* 0x08 */ + U32 Capabilities; /* 0x0C */ + U16 NOIOB; /* 0x10 */ + U8 NVMeAbortTO; /* 0x12 */ + U8 PageSize; /* 0x13 */ + U16 ShutdownLatency; /* 0x14 */ + U16 Reserved16; /* 0x16 */ +} MPI3_DEVICE0_PCIE_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_PCIE_FORMAT, + Mpi3Device0PcieFormat_t, MPI3_POINTER pMpi3Device0PcieFormat_t; + +/**** Defines for the SupportedLinkRates field ****/ +#define MPI3_DEVICE0_PCIE_LINK_RATE_32_0_SUPP (0x10) +#define MPI3_DEVICE0_PCIE_LINK_RATE_16_0_SUPP (0x08) +#define MPI3_DEVICE0_PCIE_LINK_RATE_8_0_SUPP (0x04) +#define MPI3_DEVICE0_PCIE_LINK_RATE_5_0_SUPP (0x02) +#define MPI3_DEVICE0_PCIE_LINK_RATE_2_5_SUPP (0x01) + +/**** Defines for the NegotiatedLinkRate field - use MPI3_PCIE_NEG_LINK_RATE_ defines ****/ + +/**** Defines for DeviceInfo bitfield ****/ +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_MASK (0x0003) +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NO_DEVICE (0x0000) +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_NVME_DEVICE (0x0001) +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SWITCH_DEVICE (0x0002) +#define MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE (0x0003) + +/**** Defines for the Capabilities field ****/ +#define MPI3_DEVICE0_PCIE_CAP_METADATA_SEPARATED (0x00000010) +#define MPI3_DEVICE0_PCIE_CAP_SGL_DWORD_ALIGN_REQUIRED (0x00000008) +#define MPI3_DEVICE0_PCIE_CAP_NVME_SGL_ENABLED (0x00000004) +#define MPI3_DEVICE0_PCIE_CAP_BIT_BUCKET_SGL_SUPP (0x00000002) +#define MPI3_DEVICE0_PCIE_CAP_SGL_SUPP (0x00000001) + +typedef struct _MPI3_DEVICE0_VD_FORMAT { + U8 VdState; /* 0x00 */ + U8 RAIDLevel; /* 0x01 */ + U16 DeviceInfo; /* 0x02 */ + U16 Flags; /* 0x04 */ + U16 Reserved06; /* 0x06 */ + U32 Reserved08[2]; /* 0x08 */ +} MPI3_DEVICE0_VD_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_VD_FORMAT, + Mpi3Device0VdFormat_t, MPI3_POINTER pMpi3Device0VdFormat_t; + +/**** Defines for the VdState field ****/ +#define MPI3_DEVICE0_VD_STATE_OFFLINE (0x00) +#define MPI3_DEVICE0_VD_STATE_PARTIALLY_DEGRADED (0x01) +#define MPI3_DEVICE0_VD_STATE_DEGRADED (0x02) +#define MPI3_DEVICE0_VD_STATE_OPTIMAL (0x03) + +/**** Defines for RAIDLevel field ****/ +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_0 (0) +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_1 (1) +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_5 (5) +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_6 (6) +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_10 (10) +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_50 (50) +#define MPI3_DEVICE0_VD_RAIDLEVEL_RAID_60 (60) + +/**** Defines for DeviceInfo field ****/ +#define MPI3_DEVICE0_VD_DEVICE_INFO_HDD (0x0010) +#define MPI3_DEVICE0_VD_DEVICE_INFO_SSD (0x0008) +#define MPI3_DEVICE0_VD_DEVICE_INFO_NVME (0x0004) +#define MPI3_DEVICE0_VD_DEVICE_INFO_SATA (0x0002) +#define MPI3_DEVICE0_VD_DEVICE_INFO_SAS (0x0001) + +/**** Defines for the Flags field ****/ +#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_MASK (0x0003) +#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_NONE (0x0000) +#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_HOST (0x0001) +#define MPI3_DEVICE0_VD_FLAGS_METADATA_MODE_IOC (0x0002) + +typedef union _MPI3_DEVICE0_DEV_SPEC_FORMAT { + MPI3_DEVICE0_SAS_SATA_FORMAT SasSataFormat; + MPI3_DEVICE0_PCIE_FORMAT PcieFormat; + MPI3_DEVICE0_VD_FORMAT VdFormat; +} MPI3_DEVICE0_DEV_SPEC_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE0_DEV_SPEC_FORMAT, + Mpi3Device0DevSpecFormat_t, MPI3_POINTER pMpi3Device0DevSpecFormat_t; + +typedef struct _MPI3_DEVICE_PAGE0 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x08 */ + U16 ParentDevHandle; /* 0x0A */ + U16 Slot; /* 0x0C */ + U16 EnclosureHandle; /* 0x0E */ + U64 WWID; /* 0x10 */ + U16 PersistentID; /* 0x18 */ + U8 IOUnitPort; /* 0x1A */ + U8 AccessStatus; /* 0x1B */ + U16 Flags; /* 0x1C */ + U16 Reserved1E; /* 0x1E */ + U16 SlotIndex; /* 0x20 */ + U16 QueueDepth; /* 0x22 */ + U8 Reserved24[3]; /* 0x24 */ + U8 DeviceForm; /* 0x27 */ + MPI3_DEVICE0_DEV_SPEC_FORMAT DeviceSpecific; /* 0x28 */ +} MPI3_DEVICE_PAGE0, MPI3_POINTER PTR_MPI3_DEVICE_PAGE0, + Mpi3DevicePage0_t, MPI3_POINTER pMpi3DevicePage0_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_DEVICE0_PAGEVERSION (0x00) + +/**** Defines for the Slot field - use MPI3_SLOT_ defines ****/ + +/**** Defines for the WWID field ****/ +#define MPI3_DEVICE0_WWID_INVALID (0xFFFFFFFFFFFFFFFF) + +/**** Defines for the PersistentID field ****/ +#define MPI3_DEVICE0_PERSISTENTID_INVALID (0xFFFF) + +/**** Defines for the IOUnitPort field ****/ +#define MPI3_DEVICE0_IOUNITPORT_INVALID (0xFF) + +/**** Defines for the AccessStatus field ****/ +/* Generic Access Status Codes */ +#define MPI3_DEVICE0_ASTATUS_NO_ERRORS (0x00) +#define MPI3_DEVICE0_ASTATUS_NEEDS_INITIALIZATION (0x01) +#define MPI3_DEVICE0_ASTATUS_CAP_UNSUPPORTED (0x02) +#define MPI3_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x03) +#define MPI3_DEVICE0_ASTATUS_UNAUTHORIZED (0x04) +#define MPI3_DEVICE0_ASTATUS_DEVICE_MISSING_DELAY (0x05) +/* SAS Access Status Codes */ +#define MPI3_DEVICE0_ASTATUS_SAS_UNKNOWN (0x10) +#define MPI3_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x11) +#define MPI3_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x12) +/* SATA Access Status Codes */ +#define MPI3_DEVICE0_ASTATUS_SIF_UNKNOWN (0x20) +#define MPI3_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x21) +#define MPI3_DEVICE0_ASTATUS_SIF_DIAG (0x22) +#define MPI3_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x23) +#define MPI3_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x24) +#define MPI3_DEVICE0_ASTATUS_SIF_PIO_SN (0x25) +#define MPI3_DEVICE0_ASTATUS_SIF_MDMA_SN (0x26) +#define MPI3_DEVICE0_ASTATUS_SIF_UDMA_SN (0x27) +#define MPI3_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x28) +#define MPI3_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x29) +#define MPI3_DEVICE0_ASTATUS_SIF_MAX (0x2F) +/* PCIe Access Status Codes */ +#define MPI3_DEVICE0_ASTATUS_PCIE_UNKNOWN (0x30) +#define MPI3_DEVICE0_ASTATUS_PCIE_MEM_SPACE_ACCESS (0x31) +#define MPI3_DEVICE0_ASTATUS_PCIE_UNSUPPORTED (0x32) +#define MPI3_DEVICE0_ASTATUS_PCIE_MSIX_REQUIRED (0x33) +/* NVMe Access Status Codes */ +#define MPI3_DEVICE0_ASTATUS_NVME_UNKNOWN (0x40) +#define MPI3_DEVICE0_ASTATUS_NVME_READY_TIMEOUT (0x41) +#define MPI3_DEVICE0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x42) +#define MPI3_DEVICE0_ASTATUS_NVME_IDENTIFY_FAILED (0x43) +#define MPI3_DEVICE0_ASTATUS_NVME_QCONFIG_FAILED (0x44) +#define MPI3_DEVICE0_ASTATUS_NVME_QCREATION_FAILED (0x45) +#define MPI3_DEVICE0_ASTATUS_NVME_EVENTCFG_FAILED (0x46) +#define MPI3_DEVICE0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x47) +#define MPI3_DEVICE0_ASTATUS_NVME_IDLE_TIMEOUT (0x48) +#define MPI3_DEVICE0_ASTATUS_NVME_CTRL_FAILURE_STATUS (0x49) +/* Virtual Device Access Status Codes */ +#define MPI3_DEVICE0_ASTATUS_VD_UNKNOWN (0x50) + +/**** Defines for the Flags field ****/ +#define MPI3_DEVICE0_FLAGS_CONTROLLER_DEV_HANDLE (0x0080) +#define MPI3_DEVICE0_FLAGS_HIDDEN (0x0008) +#define MPI3_DEVICE0_FLAGS_ATT_METHOD_MASK (0x0006) +#define MPI3_DEVICE0_FLAGS_ATT_METHOD_NOT_DIR_ATTACHED (0x0000) +#define MPI3_DEVICE0_FLAGS_ATT_METHOD_DIR_ATTACHED (0x0002) +#define MPI3_DEVICE0_FLAGS_ATT_METHOD_VIRTUAL (0x0004) +#define MPI3_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) + +/**** Defines for the SlotIndex field - use MPI3_SLOT_INDEX_ defines ****/ + +/**** Defines for the DeviceForm field - use MPI3_DEVICE_DEVFORM_ defines ****/ + +/**** Defines for the QueueDepth field ****/ +#define MPI3_DEVICE0_QUEUE_DEPTH_NOT_APPLICABLE (0x0000) + + +/***************************************************************************** + * Device Page 1 * + ****************************************************************************/ +typedef struct _MPI3_DEVICE1_SAS_SATA_FORMAT { + U32 Reserved00; /* 0x00 */ +} MPI3_DEVICE1_SAS_SATA_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_SAS_SATA_FORMAT, + Mpi3Device1SasSataFormat_t, MPI3_POINTER pMpi3Device1SasSataFormat_t; + +typedef struct _MPI3_DEVICE1_PCIE_FORMAT { + U16 VendorID; /* 0x00 */ + U16 DeviceID; /* 0x02 */ + U16 SubsystemVendorID; /* 0x04 */ + U16 SubsystemID; /* 0x06 */ + U32 Reserved08; /* 0x08 */ + U8 RevisionID; /* 0x0C */ + U8 Reserved0D; /* 0x0D */ + U16 PCIParameters; /* 0x0E */ +} MPI3_DEVICE1_PCIE_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_PCIE_FORMAT, + Mpi3Device1PcieFormat_t, MPI3_POINTER pMpi3Device1PcieFormat_t; + +/**** Defines for the PCIParameters field ****/ +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_128B (0x0) +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_256B (0x1) +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_512B (0x2) +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_1024B (0x3) +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_2048B (0x4) +#define MPI3_DEVICE1_PCIE_PARAMS_DATA_SIZE_4096B (0x5) + +/*** MaxReadRequestSize, CurrentMaxPayloadSize, and MaxPayloadSizeSupported ***/ +/*** all use the size definitions above - shifted to the proper position ***/ +#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_MASK (0x01C0) +#define MPI3_DEVICE1_PCIE_PARAMS_MAX_READ_REQ_SHIFT (6) +#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_MASK (0x0038) +#define MPI3_DEVICE1_PCIE_PARAMS_CURR_MAX_PAYLOAD_SHIFT (3) +#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_MASK (0x0007) +#define MPI3_DEVICE1_PCIE_PARAMS_SUPP_MAX_PAYLOAD_SHIFT (0) + +typedef struct _MPI3_DEVICE1_VD_FORMAT { + U32 Reserved00; /* 0x00 */ +} MPI3_DEVICE1_VD_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_VD_FORMAT, + Mpi3Device1VdFormat_t, MPI3_POINTER pMpi3Device1VdFormat_t; + +typedef union _MPI3_DEVICE1_DEV_SPEC_FORMAT { + MPI3_DEVICE1_SAS_SATA_FORMAT SasSataFormat; + MPI3_DEVICE1_PCIE_FORMAT PcieFormat; + MPI3_DEVICE1_VD_FORMAT VdFormat; +} MPI3_DEVICE1_DEV_SPEC_FORMAT, MPI3_POINTER PTR_MPI3_DEVICE1_DEV_SPEC_FORMAT, + Mpi3Device1DevSpecFormat_t, MPI3_POINTER pMpi3Device1DevSpecFormat_t; + +typedef struct _MPI3_DEVICE_PAGE1 { + MPI3_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x08 */ + U16 Reserved0A; /* 0x0A */ + U32 Reserved0C[12]; /* 0x0C */ + U8 Reserved3C[3]; /* 0x3C */ + U8 DeviceForm; /* 0x3F */ + MPI3_DEVICE1_DEV_SPEC_FORMAT DeviceSpecific; /* 0x40 */ +} MPI3_DEVICE_PAGE1, MPI3_POINTER PTR_MPI3_DEVICE_PAGE1, + Mpi3DevicePage1_t, MPI3_POINTER pMpi3DevicePage1_t; + +/**** Defines for the PageVersion field ****/ +#define MPI3_DEVICE1_PAGEVERSION (0x00) + +/**** Defines for the DeviceForm field - use MPI3_DEVICE_DEVFORM_ defines ****/ + +#endif /* MPI30_CNFG_H */ diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_sas.h b/drivers/scsi/mpi3mr/mpi/mpi30_sas.h new file mode 100644 index 000000000000..b60a5899437e --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi/mpi30_sas.h @@ -0,0 +1,46 @@ +/* + * Copyright 2016-2020 Broadcom Inc. All rights reserved. + * + * Name: mpi30_sas.h + * Description: Contains MPI Serial Attached SCSI structures and definitions + * Creation Date: 12/08/2016 + * Version: 03.00.00 + */ +#ifndef MPI30_SAS_H +#define MPI30_SAS_H 1 + +/***************************************************************************** + * SAS Device Info Definitions * + ****************************************************************************/ +#define MPI3_SAS_DEVICE_INFO_SSP_TARGET (0x00000100) +#define MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET (0x00000080) +#define MPI3_SAS_DEVICE_INFO_SMP_TARGET (0x00000040) +#define MPI3_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000020) +#define MPI3_SAS_DEVICE_INFO_STP_INITIATOR (0x00000010) +#define MPI3_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000008) +#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK (0x00000007) +#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_NO_DEVICE (0x00000000) +#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE (0x00000001) +#define MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_EXPANDER (0x00000002) + +/***************************************************************************** + * SMP Passthrough Request Message * + ****************************************************************************/ +typedef struct _MPI3_SMP_PASSTHROUGH_REQUEST { + U16 HostTag; /* 0x00 */ + U8 IOCUseOnly02; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 IOCUseOnly04; /* 0x04 */ + U8 IOCUseOnly06; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U16 ChangeCount; /* 0x08 */ + U8 Reserved0A; /* 0x0A */ + U8 IOUnitPort; /* 0x0B */ + U32 Reserved0C[3]; /* 0x0C */ + U64 SASAddress; /* 0x18 */ + MPI3_SGE_SIMPLE RequestSGE; /* 0x20 */ + MPI3_SGE_SIMPLE ResponseSGE; /* 0x30 */ +} MPI3_SMP_PASSTHROUGH_REQUEST, MPI3_POINTER PTR_MPI3_SMP_PASSTHROUGH_REQUEST, + Mpi3SmpPassthroughRequest_t, MPI3_POINTER pMpi3SmpPassthroughRequest_t; + +#endif /* MPI30_SAS_H */ diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h index 7769ba16c9bc..063877f1bc37 100644 --- a/drivers/scsi/mpi3mr/mpi3mr.h +++ b/drivers/scsi/mpi3mr/mpi3mr.h @@ -134,6 +134,10 @@ extern struct list_head mrioc_list; #define MPI3MR_RSP_IO_QUEUED_ON_IOC \ MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC +#define MPI3MR_DEFAULT_MDTS (128 * 1024) +/* Command retry count definitions */ +#define MPI3MR_DEV_RMHS_RETRY_COUNT 3 + /* SGE Flag definition */ #define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \ (MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \ @@ -313,6 +317,126 @@ struct mpi3mr_intr_info { char name[MPI3MR_NAME_LENGTH]; }; +/** + * struct tgt_dev_sas_sata - SAS/SATA device specific + * information cached from firmware given data + * + * @sas_address: World wide unique SAS address + * @dev_info: Device information bits + */ +struct tgt_dev_sas_sata { + u64 sas_address; + u16 dev_info; +}; + +/** + * struct tgt_dev_pcie - PCIe device specific information cached + * from firmware given data + * + * @mdts: Maximum data transfer size + * @capb: Device capabilities + * @pgsz: Device page size + * @abort_to: Timeout for abort TM + * @reset_to: Timeout for Target/LUN reset TM + */ +struct tgt_dev_pcie { + u32 mdts; + u16 capb; + u8 pgsz; + u8 abort_to; + u8 reset_to; +}; + +/** + * struct tgt_dev_volume - virtual device specific information + * cached from firmware given data + * + * @state: State of the VD + */ +struct tgt_dev_volume { + u8 state; +}; + +/** + * union _form_spec_inf - union of device specific information + */ +union _form_spec_inf { + struct tgt_dev_sas_sata sas_sata_inf; + struct tgt_dev_pcie pcie_inf; + struct tgt_dev_volume vol_inf; +}; + + + +/** + * struct mpi3mr_tgt_dev - target device data structure + * + * @list: List pointer + * @starget: Scsi_target pointer + * @dev_handle: FW device handle + * @parent_handle: FW parent device handle + * @slot: Slot number + * @encl_handle: FW enclosure handle + * @perst_id: FW assigned Persistent ID + * @dev_type: SAS/SATA/PCIE device type + * @is_hidden: Should be exposed to upper layers or not + * @host_exposed: Already exposed to host or not + * @q_depth: Device specific Queue Depth + * @wwid: World wide ID + * @dev_spec: Device type specific information + * @ref_count: Reference count + */ +struct mpi3mr_tgt_dev { + struct list_head list; + struct scsi_target *starget; + u16 dev_handle; + u16 parent_handle; + u16 slot; + u16 encl_handle; + u16 perst_id; + u8 dev_type; + u8 is_hidden; + u8 host_exposed; + u16 q_depth; + u64 wwid; + union _form_spec_inf dev_spec; + struct kref ref_count; +}; + +/** + * mpi3mr_tgtdev_get - k reference incrementor + * @s: Target device reference + * + * Increment target device reference count. + */ +static inline void mpi3mr_tgtdev_get(struct mpi3mr_tgt_dev *s) +{ + kref_get(&s->ref_count); +} + +/** + * mpi3mr_free_tgtdev - target device memory dealloctor + * @r: k reference pointer of the target device + * + * Free target device memory when no reference. + */ +static inline void mpi3mr_free_tgtdev(struct kref *r) +{ + kfree(container_of(r, struct mpi3mr_tgt_dev, ref_count)); +} + +/** + * mpi3mr_tgtdev_put - k reference decrementor + * @s: Target device reference + * + * Decrement target device reference count. + */ +static inline void mpi3mr_tgtdev_put(struct mpi3mr_tgt_dev *s) +{ + kref_put(&s->ref_count, mpi3mr_free_tgtdev); +} + + /** * struct mpi3mr_stgt_priv_data - SCSI target private structure * @@ -358,6 +482,7 @@ struct mpi3mr_sdev_priv_data { * @done: Completeor for wakeup * @reply: Firmware reply for internal commands * @sensebuf: Sensebuf for SCSI IO commands + * @iou_rc: IO Unit control reason code * @state: Command State * @dev_handle: Firmware handle for device specific commands * @ioc_status: IOC status from the firmware @@ -372,6 +497,7 @@ struct mpi3mr_drv_cmd { struct completion done; void *reply; u8 *sensebuf; + u8 iou_rc; u16 state; u16 dev_handle; u16 ioc_status; @@ -478,6 +604,11 @@ struct scmd_priv { * @sense_buf_q_dma: Sense buffer queue DMA address * @sbq_lock: Sense buffer queue lock * @sbq_host_index: Sense buffer queuehost index + * @event_masks: Event mask bitmap + * @fwevt_worker_name: Firmware event worker thread name + * @fwevt_worker_thread: Firmware event worker thread + * @fwevt_lock: Firmware event lock + * @fwevt_list: Firmware event list * @watchdog_work_q_name: Fault watchdog worker thread name * @watchdog_work_q: Fault watchdog worker thread * @watchdog_work: Fault watchdog work @@ -493,6 +624,12 @@ struct scmd_priv { * @chain_bitmap_sz: Chain buffer allocator bitmap size * @chain_bitmap: Chain buffer allocator bitmap * @chain_buf_lock: Chain buffer list lock + * @dev_rmhs_cmds: Command tracker for device removal commands + * @devrem_bitmap_sz: Device removal bitmap size + * @devrem_bitmap: Device removal bitmap + * @dev_handle_bitmap_sz: Device handle bitmap size + * @removepend_bitmap: Remove pending bitmap + * @delayed_rmhs_list: Delayed device removal list * @reset_in_progress: Reset in progress flag * @unrecoverable: Controller unrecoverable flag * @diagsave_timeout: Diagnostic information save timeout @@ -576,6 +713,12 @@ struct mpi3mr_ioc { dma_addr_t sense_buf_q_dma; spinlock_t sbq_lock; u32 sbq_host_index; + u32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS]; + + char fwevt_worker_name[MPI3MR_NAME_LENGTH]; + struct workqueue_struct *fwevt_worker_thread; + spinlock_t fwevt_lock; + struct list_head fwevt_list; char watchdog_work_q_name[20]; struct workqueue_struct *watchdog_work_q; @@ -588,6 +731,8 @@ struct mpi3mr_ioc { u8 stop_drv_processing; u16 max_host_ios; + spinlock_t tgtdev_lock; + struct list_head tgtdev_list; u32 chain_buf_count; struct dma_pool *chain_buf_pool; @@ -596,6 +741,13 @@ struct mpi3mr_ioc { void *chain_bitmap; spinlock_t chain_buf_lock; + struct mpi3mr_drv_cmd dev_rmhs_cmds[MPI3MR_NUM_DEVRMCMD]; + u16 devrem_bitmap_sz; + void *devrem_bitmap; + u16 dev_handle_bitmap_sz; + void *removepend_bitmap; + struct list_head delayed_rmhs_list; + u8 reset_in_progress; u8 unrecoverable; @@ -608,6 +760,45 @@ struct mpi3mr_ioc { u16 op_reply_q_offset; }; +/** + * struct mpi3mr_fwevt - Firmware event structure. + * + * @list: list head + * @work: Work structure + * @mrioc: Adapter instance reference + * @event_id: MPI3 firmware event ID + * @send_ack: Event acknowledgment required or not + * @process_evt: Bottomhalf processing required or not + * @evt_ctx: Event context to send in Ack + * @ref_count: kref count + * @event_data: Actual MPI3 event data + */ +struct mpi3mr_fwevt { + struct list_head list; + struct work_struct work; + struct mpi3mr_ioc *mrioc; + u16 event_id; + bool send_ack; + bool process_evt; + u32 evt_ctx; + struct kref ref_count; + char event_data[0] __aligned(4); +}; + + +/** + * struct delayed_dev_rmhs_node - Delayed device removal node + * + * @list: list head + * @handle: Device handle + * @iou_rc: IO Unit Control Reason Code + */ +struct delayed_dev_rmhs_node { + struct list_head list; + u16 handle; + u8 iou_rc; +}; + int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc); void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc); int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc); @@ -627,6 +818,8 @@ void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc, void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc, u64 sense_buf_dma); +void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc, + Mpi3EventNotificationReply_t *event_reply); void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc, Mpi3DefaultReplyDescriptor_t *reply_desc, u64 *reply_dma, u16 qidx); @@ -639,5 +832,14 @@ void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc); void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc); enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc); +int mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event, + u32 event_ctx); + +void mpi3mr_wait_for_host_io(struct mpi3mr_ioc *mrioc, u32 timeout); +void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc); +void mpi3mr_flush_host_io(struct mpi3mr_ioc *mrioc); +void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc); +void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc); +void mpi3mr_flush_delayed_rmhs_list(struct mpi3mr_ioc *mrioc); #endif /*MPI3MR_H_INCLUDED*/ diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index ef238091523b..668dd001b6b4 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -160,12 +160,14 @@ static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc, (Mpi3EventNotificationReply_t *)def_reply; mrioc->change_count = le16_to_cpu(event_reply->IOCChangeCount); + mpi3mr_os_handle_events(mrioc, event_reply); } static struct mpi3mr_drv_cmd * mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag, Mpi3DefaultReply_t *def_reply) { + u16 idx; switch (host_tag) { case MPI3MR_HOSTTAG_INITCMDS: return &mrioc->init_cmds; @@ -177,6 +179,11 @@ mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag, default: break; } + if (host_tag >= MPI3MR_HOSTTAG_DEVRMCMD_MIN && + host_tag <= MPI3MR_HOSTTAG_DEVRMCMD_MAX) { + idx = host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; + return &mrioc->dev_rmhs_cmds[idx]; + } return NULL; } @@ -1925,6 +1932,12 @@ static int mpi3mr_alloc_reply_sense_bufs(struct mpi3mr_ioc *mrioc) if (!mrioc->init_cmds.reply) goto out_failed; + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { + mrioc->dev_rmhs_cmds[i].reply = kzalloc(mrioc->facts.reply_sz, + GFP_KERNEL); + if (!mrioc->dev_rmhs_cmds[i].reply) + goto out_failed; + } mrioc->num_reply_bufs = mrioc->facts.max_reqs + MPI3MR_NUM_EVT_REPLIES; mrioc->reply_free_qsz = mrioc->num_reply_bufs + 1; @@ -2135,6 +2148,162 @@ static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc) return retval; } +/** + * mpi3mr_unmask_events - Unmask events in event mask bitmap + * @mrioc: Adapter instance reference + * @event: MPI event ID + * + * Un mask the specific event by resetting the event_mask + * bitmap. + * + * Return: 0 on success, non-zero on failures. + */ +static void mpi3mr_unmask_events(struct mpi3mr_ioc *mrioc, u16 event) +{ + u32 desired_event; + u8 word; + + if (event >= 128) + return; + + desired_event = (1 << (event % 32)); + word = event / 32; + + mrioc->event_masks[word] &= ~desired_event; +} + +/** + * mpi3mr_issue_event_notification - Send event notification + * @mrioc: Adapter instance reference + * + * Issue event notification MPI request through admin queue and + * wait for the completion of it or time out. + * + * Return: 0 on success, non-zero on failures. + */ +static int mpi3mr_issue_event_notification(struct mpi3mr_ioc *mrioc) +{ + Mpi3EventNotificationRequest_t evtnotify_req; + int retval = 0; + u8 i; + + memset(&evtnotify_req, 0, sizeof(evtnotify_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "Issue EvtNotify: Init command is in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + evtnotify_req.HostTag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + evtnotify_req.Function = MPI3_FUNCTION_EVENT_NOTIFICATION; + for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + evtnotify_req.EventMasks[i] = + cpu_to_le32(mrioc->event_masks[i]); + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &evtnotify_req, + sizeof(evtnotify_req), 1); + if (retval) { + ioc_err(mrioc, "Issue EvtNotify: Admin Post failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "Issue EvtNotify: command timed out\n"); + mpi3mr_set_diagsave(mrioc); + mpi3mr_issue_reset(mrioc, + MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, + MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT); + mrioc->unrecoverable = 1; + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "Issue EvtNotify: Failed IOCStatus(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); +out: + return retval; +} + +/** + * mpi3mr_send_event_ack - Send event acknowledgment + * @event: MPI3 event ID + * @event_ctx: Event context + * + * Send event acknowledgment through admin queue and wait for + * it to complete. + * + * Return: 0 on success, non-zero on failures. + */ +int mpi3mr_send_event_ack(struct mpi3mr_ioc *mrioc, u8 event, + u32 event_ctx) +{ + Mpi3EventAckRequest_t evtack_req; + int retval = 0; + + memset(&evtack_req, 0, sizeof(evtack_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "Send EvtAck: Init command is in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + evtack_req.HostTag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + evtack_req.Function = MPI3_FUNCTION_EVENT_ACK; + evtack_req.Event = event; + evtack_req.EventContext = cpu_to_le32(event_ctx); + + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &evtack_req, + sizeof(evtack_req), 1); + if (retval) { + ioc_err(mrioc, "Send EvtAck: Admin Post failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "Issue EvtNotify: command timed out\n"); + mpi3mr_soft_reset_handler(mrioc, + MPI3MR_RESET_FROM_EVTACK_TIMEOUT, 1); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "Send EvtAck: Failed IOCStatus(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); +out: + return retval; +} + /** * mpi3mr_alloc_chain_bufs - Allocate chain buffers @@ -2416,7 +2585,7 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc) enum mpi3mr_iocstate ioc_state; u64 base_info; u32 timeout; - u32 ioc_status, ioc_config; + u32 ioc_status, ioc_config, i; Mpi3IOCFactsData_t facts_data; mrioc->change_count = 0; @@ -2566,6 +2735,24 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc) goto out_failed; } + for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + mrioc->event_masks[i] = -1; + + mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_ADDED); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_INFO_CHANGED); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_STATUS_CHANGE); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DISCOVERY); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR); + + retval = mpi3mr_issue_event_notification(mrioc); + if (retval) { + ioc_err(mrioc, "Failed to issue event notification %d\n", + retval); + goto out_failed; + } + return retval; out_failed: @@ -2648,6 +2835,11 @@ static void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc) kfree(mrioc->chain_bitmap); mrioc->chain_bitmap = NULL; + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { + kfree(mrioc->dev_rmhs_cmds[i].reply); + mrioc->dev_rmhs_cmds[i].reply = NULL; + } + if (mrioc->chain_buf_pool) { for (i = 0; i < mrioc->chain_buf_count; i++) { if (mrioc->chain_sgl_list[i].addr) { diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c index 7b0d52481929..9b9230d1107a 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_os.c +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c @@ -125,6 +125,1281 @@ static void mpi3mr_clear_scmd_priv(struct mpi3mr_ioc *mrioc, } } +static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle, + struct mpi3mr_drv_cmd *cmdparam, u8 iou_rc); +static void mpi3mr_fwevt_worker(struct work_struct *work); + + +/** + * mpi3mr_fwevt_free - firmware event memory dealloctor + * @r: k reference pointer of the firmware event + * + * Free firmware event memory when no reference. + */ +static void mpi3mr_fwevt_free(struct kref *r) +{ + kfree(container_of(r, struct mpi3mr_fwevt, ref_count)); +} + +/** + * mpi3mr_fwevt_get - k reference incrementor + * @fwevt: Firmware event reference + * + * Increment firmware event reference count. + */ +static void mpi3mr_fwevt_get(struct mpi3mr_fwevt *fwevt) +{ + kref_get(&fwevt->ref_count); +} + +/** + * mpi3mr_fwevt_put - k reference decrementor + * @fwevt: Firmware event reference + * + * Decrement firmware event reference count. + */ +static void mpi3mr_fwevt_put(struct mpi3mr_fwevt *fwevt) +{ + kref_put(&fwevt->ref_count, mpi3mr_fwevt_free); +} + +/** + * mpi3mr_alloc_fwevt - Allocate firmware event + * @len: Length of firmware event data to allocate + * + * Allocate firmware event with required length and initialize + * the reference counter. + * + * Return: firmware event reference. + */ +static struct mpi3mr_fwevt *mpi3mr_alloc_fwevt(int len) +{ + struct mpi3mr_fwevt *fwevt; + + fwevt = kzalloc(sizeof(*fwevt) + len, GFP_ATOMIC); + if (!fwevt) + return NULL; + + kref_init(&fwevt->ref_count); + return fwevt; +} + +/** + * mpi3mr_fwevt_add_to_list - Add firmware event to the list + * @mrioc: Adapter instance reference + * @fwevt: Firmware event reference + * + * Add the given firmware event to the firmware event list. + * + * Return: Nothing. + */ +static void mpi3mr_fwevt_add_to_list(struct mpi3mr_ioc *mrioc, + struct mpi3mr_fwevt *fwevt) +{ + unsigned long flags; + + if (mrioc->fwevt_worker_thread == NULL) + return; + + spin_lock_irqsave(&mrioc->fwevt_lock, flags); + /* get fwevt reference count while adding it to fwevt_list */ + mpi3mr_fwevt_get(fwevt); + INIT_LIST_HEAD(&fwevt->list); + list_add_tail(&fwevt->list, &mrioc->fwevt_list); + INIT_WORK(&fwevt->work, mpi3mr_fwevt_worker); + /* get fwevt reference count while enqueueing it to worker queue */ + mpi3mr_fwevt_get(fwevt); + queue_work(mrioc->fwevt_worker_thread, &fwevt->work); + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); +} + +/** + * mpi3mr_fwevt_del_from_list - Delete firmware event from list + * @mrioc: Adapter instance reference + * @fwevt: Firmware event reference + * + * Delete the given firmware event from the firmware event list. + * + * Return: Nothing. + */ +static void mpi3mr_fwevt_del_from_list(struct mpi3mr_ioc *mrioc, + struct mpi3mr_fwevt *fwevt) +{ + unsigned long flags; + + spin_lock_irqsave(&mrioc->fwevt_lock, flags); + if (!list_empty(&fwevt->list)) { + list_del_init(&fwevt->list); + /* + * Put fwevt reference count after + * removing it from fwevt_list + */ + mpi3mr_fwevt_put(fwevt); + } + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); +} + +/** + * mpi3mr_dequeue_fwevt - Dequeue firmware event from the list + * @mrioc: Adapter instance reference + * + * Dequeue a firmware event from the firmware event list. + * + * Return: firmware event. + */ +static struct mpi3mr_fwevt *mpi3mr_dequeue_fwevt( + struct mpi3mr_ioc *mrioc) +{ + unsigned long flags; + struct mpi3mr_fwevt *fwevt = NULL; + + spin_lock_irqsave(&mrioc->fwevt_lock, flags); + if (!list_empty(&mrioc->fwevt_list)) { + fwevt = list_first_entry(&mrioc->fwevt_list, + struct mpi3mr_fwevt, list); + list_del_init(&fwevt->list); + /* + * Put fwevt reference count after + * removing it from fwevt_list + */ + mpi3mr_fwevt_put(fwevt); + } + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); + + return fwevt; +} + +/** + * mpi3mr_cleanup_fwevt_list - Cleanup firmware event list + * @mrioc: Adapter instance reference + * + * Flush all pending firmware events from the firmware event + * list. + * + * Return: Nothing. + */ +void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc) +{ + struct mpi3mr_fwevt *fwevt = NULL; + + if ((list_empty(&mrioc->fwevt_list) && !mrioc->current_event) || + !mrioc->fwevt_worker_thread) + return; + + while ((fwevt = mpi3mr_dequeue_fwevt(mrioc)) || + (fwevt = mrioc->current_event)) { + /* + * Wait on the fwevt to complete. If this returns 1, then + * the event was never executed, and we need a put for the + * reference the work had on the fwevt. + * + * If it did execute, we wait for it to finish, and the put will + * happen from mpi3mr_process_fwevt() + */ + if (cancel_work_sync(&fwevt->work)) { + /* + * Put fwevt reference count after + * dequeuing it from worker queue + */ + mpi3mr_fwevt_put(fwevt); + /* + * Put fwevt reference count to neutralize + * kref_init increment + */ + mpi3mr_fwevt_put(fwevt); + } + } +} + +/** + * mpi3mr_alloc_tgtdev - target device allocator + * + * Allocate target device instance and initialize the reference + * count + * + * Return: target device instance. + */ +static struct mpi3mr_tgt_dev *mpi3mr_alloc_tgtdev(void) +{ + struct mpi3mr_tgt_dev *tgtdev; + + tgtdev = kzalloc(sizeof(*tgtdev), GFP_ATOMIC); + if (!tgtdev) + return NULL; + kref_init(&tgtdev->ref_count); + return tgtdev; +} + +/** + * mpi3mr_tgtdev_add_to_list -Add tgtdevice to the list + * @mrioc: Adapter instance reference + * @tgtdev: Target device + * + * Add the target device to the target device list + * + * Return: Nothing. + */ +static void mpi3mr_tgtdev_add_to_list(struct mpi3mr_ioc *mrioc, + struct mpi3mr_tgt_dev *tgtdev) +{ + unsigned long flags; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + mpi3mr_tgtdev_get(tgtdev); + INIT_LIST_HEAD(&tgtdev->list); + list_add_tail(&tgtdev->list, &mrioc->tgtdev_list); + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); +} + +/** + * mpi3mr_tgtdev_del_from_list -Delete tgtdevice from the list + * @mrioc: Adapter instance reference + * @tgtdev: Target device + * + * Remove the target device from the target device list + * + * Return: Nothing. + */ +static void mpi3mr_tgtdev_del_from_list(struct mpi3mr_ioc *mrioc, + struct mpi3mr_tgt_dev *tgtdev) +{ + unsigned long flags; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + if (!list_empty(&tgtdev->list)) { + list_del_init(&tgtdev->list); + mpi3mr_tgtdev_put(tgtdev); + } + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); +} + +/** + * __mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle + * @mrioc: Adapter instance reference + * @handle: Device handle + * + * Accessor to retrieve target device from the device handle. + * Non Lock version + * + * Return: Target device reference. + */ +static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_handle( + struct mpi3mr_ioc *mrioc, u16 handle) +{ + struct mpi3mr_tgt_dev *tgtdev; + + assert_spin_locked(&mrioc->tgtdev_lock); + list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) + if (tgtdev->dev_handle == handle) + goto found_tgtdev; + return NULL; + +found_tgtdev: + mpi3mr_tgtdev_get(tgtdev); + return tgtdev; +} + +/** + * mpi3mr_get_tgtdev_by_handle -Get tgtdev from device handle + * @mrioc: Adapter instance reference + * @handle: Device handle + * + * Accessor to retrieve target device from the device handle. + * Lock version + * + * Return: Target device reference. + */ +struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle( + struct mpi3mr_ioc *mrioc, u16 handle) +{ + struct mpi3mr_tgt_dev *tgtdev; + unsigned long flags; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgtdev = __mpi3mr_get_tgtdev_by_handle(mrioc, handle); + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + return tgtdev; +} + +/** + * __mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persist ID + * @mrioc: Adapter instance reference + * @persist_id: Persistent ID + * + * Accessor to retrieve target device from the Persistent ID. + * Non Lock version + * + * Return: Target device reference. + */ +static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_perst_id( + struct mpi3mr_ioc *mrioc, u16 persist_id) +{ + struct mpi3mr_tgt_dev *tgtdev; + + assert_spin_locked(&mrioc->tgtdev_lock); + list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) + if (tgtdev->perst_id == persist_id) + goto found_tgtdev; + return NULL; + +found_tgtdev: + mpi3mr_tgtdev_get(tgtdev); + return tgtdev; +} + +/** + * mpi3mr_get_tgtdev_by_perst_id -Get tgtdev from persistent ID + * @mrioc: Adapter instance reference + * @persist_id: Persistent ID + * + * Accessor to retrieve target device from the Persistent ID. + * Lock version + * + * Return: Target device reference. + */ +struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_perst_id( + struct mpi3mr_ioc *mrioc, u16 persist_id) +{ + struct mpi3mr_tgt_dev *tgtdev; + unsigned long flags; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgtdev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, persist_id); + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + return tgtdev; +} + + +/** + * __mpi3mr_get_tgtdev_from_tgtpriv -Get tgtdev from tgt private + * @mrioc: Adapter instance reference + * @tgt_priv: Target private data + * + * Accessor to return target device from the target private + * data. Non Lock version + * + * Return: Target device reference. + */ +static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_from_tgtpriv( + struct mpi3mr_ioc *mrioc, struct mpi3mr_stgt_priv_data *tgt_priv) +{ + struct mpi3mr_tgt_dev *tgtdev; + + assert_spin_locked(&mrioc->tgtdev_lock); + tgtdev = tgt_priv->tgt_dev; + if (tgtdev) + mpi3mr_tgtdev_get(tgtdev); + return tgtdev; +} + +/** + * mpi3mr_remove_tgtdev_from_host - Remove dev from upper layers + * @mrioc: Adapter instance reference + * @tgtdev: Target device structure + * + * Checks whether the device is exposed to upper layers and if it + * is then remove the device from upper layers by calling + * scsi_remove_target(). + * + * Return: 0 on success, non zero on failure. + */ +static void mpi3mr_remove_tgtdev_from_host(struct mpi3mr_ioc *mrioc, + struct mpi3mr_tgt_dev *tgtdev) +{ + struct mpi3mr_stgt_priv_data *tgt_priv; + + + ioc_info(mrioc, "%s :Removing handle(0x%04x), wwid(0x%016llx)\n", + __func__, tgtdev->dev_handle, (unsigned long long) tgtdev->wwid); + if (tgtdev->starget && tgtdev->starget->hostdata) { + tgt_priv = tgtdev->starget->hostdata; + tgt_priv->dev_handle = MPI3MR_INVALID_DEV_HANDLE; + } + + if (tgtdev->starget) { + scsi_remove_target(&tgtdev->starget->dev); + tgtdev->host_exposed = 0; + } + ioc_info(mrioc, "%s :Removed handle(0x%04x), wwid(0x%016llx)\n", + __func__, tgtdev->dev_handle, (unsigned long long) tgtdev->wwid); +} + + +/** + * mpi3mr_report_tgtdev_to_host - Expose device to upper layers + * @mrioc: Adapter instance reference + * @perst_id: Persistent ID of the device + * + * Checks whether the device can be exposed to upper layers and + * if it is not then expose the device to upper layers by + * calling scsi_scan_target(). + * + * Return: 0 on success, non zero on failure. + */ +static int mpi3mr_report_tgtdev_to_host(struct mpi3mr_ioc *mrioc, + u16 perst_id) +{ + int retval = 0; + struct mpi3mr_tgt_dev *tgtdev; + + tgtdev = mpi3mr_get_tgtdev_by_perst_id(mrioc, perst_id); + if (!tgtdev) { + retval = -1; + goto out; + } + if (tgtdev->is_hidden) { + retval = -1; + goto out; + } + if (!tgtdev->host_exposed && !mrioc->reset_in_progress) { + tgtdev->host_exposed = 1; + scsi_scan_target(&mrioc->shost->shost_gendev, 0, + tgtdev->perst_id, + SCAN_WILD_CARD, SCSI_SCAN_INITIAL); + if (!tgtdev->starget) + tgtdev->host_exposed = 0; + } +out: + if (tgtdev) + mpi3mr_tgtdev_put(tgtdev); + + return retval; +} + +/** + * mpi3mr_rfresh_tgtdevs - Refresh target device exposure + * @mrioc: Adapter instance reference + * + * This is executed post controller reset to identify any + * missing devices during reset and remove from the upper layers + * or expose any newly detected device to the upper layers. + * + * Return: Nothing. + */ + +void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc) +{ + struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next; + + list_for_each_entry_safe(tgtdev, tgtdev_next, &mrioc->tgtdev_list, + list) { + if ((tgtdev->dev_handle == MPI3MR_INVALID_DEV_HANDLE) && + tgtdev->host_exposed) { + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); + mpi3mr_tgtdev_del_from_list(mrioc, tgtdev); + mpi3mr_tgtdev_put(tgtdev); + } + } + + tgtdev = NULL; + list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) { + if ((tgtdev->dev_handle != MPI3MR_INVALID_DEV_HANDLE) && + !tgtdev->is_hidden && !tgtdev->host_exposed) + mpi3mr_report_tgtdev_to_host(mrioc, tgtdev->perst_id); + } +} + +/** + * mpi3mr_update_tgtdev - DevStatusChange evt bottomhalf + * @mrioc: Adapter instance reference + * @tgtdev: Target device internal structure + * @dev_pg0: New device page0 + * + * Update the information from the device page0 into the driver + * cached target device structure. + * + * Return: Nothing. + */ +static void mpi3mr_update_tgtdev(struct mpi3mr_ioc *mrioc, + struct mpi3mr_tgt_dev *tgtdev, Mpi3DevicePage0_t *dev_pg0) +{ + u16 flags = 0; + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; + + tgtdev->perst_id = le16_to_cpu(dev_pg0->PersistentID); + tgtdev->dev_handle = le16_to_cpu(dev_pg0->DevHandle); + tgtdev->dev_type = dev_pg0->DeviceForm; + tgtdev->encl_handle = le16_to_cpu(dev_pg0->EnclosureHandle); + tgtdev->parent_handle = le16_to_cpu(dev_pg0->ParentDevHandle); + tgtdev->slot = le16_to_cpu(dev_pg0->Slot); + tgtdev->q_depth = le16_to_cpu(dev_pg0->QueueDepth); + tgtdev->wwid = le64_to_cpu(dev_pg0->WWID); + + flags = le16_to_cpu(dev_pg0->Flags); + tgtdev->is_hidden = (flags & MPI3_DEVICE0_FLAGS_HIDDEN); + + if (tgtdev->starget && tgtdev->starget->hostdata) { + scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *) + tgtdev->starget->hostdata; + scsi_tgt_priv_data->perst_id = tgtdev->perst_id; + scsi_tgt_priv_data->dev_handle = tgtdev->dev_handle; + scsi_tgt_priv_data->dev_type = tgtdev->dev_type; + } + + switch (tgtdev->dev_type) { + case MPI3_DEVICE_DEVFORM_SAS_SATA: + { + Mpi3Device0SasSataFormat_t *sasinf = + &dev_pg0->DeviceSpecific.SasSataFormat; + u16 dev_info = le16_to_cpu(sasinf->DeviceInfo); + + tgtdev->dev_spec.sas_sata_inf.dev_info = dev_info; + tgtdev->dev_spec.sas_sata_inf.sas_address = + le64_to_cpu(sasinf->SASAddress); + if ((dev_info & MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK) != + MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE) + tgtdev->is_hidden = 1; + else if (!(dev_info & (MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET | + MPI3_SAS_DEVICE_INFO_SSP_TARGET))) + tgtdev->is_hidden = 1; + break; + } + case MPI3_DEVICE_DEVFORM_VD: + { + Mpi3Device0VdFormat_t *vdinf = + &dev_pg0->DeviceSpecific.VdFormat; + + tgtdev->dev_spec.vol_inf.state = vdinf->VdState; + if (vdinf->VdState == MPI3_DEVICE0_VD_STATE_OFFLINE) + tgtdev->is_hidden = 1; + break; + } + default: + break; + } +} + +/** + * mpi3mr_devstatuschg_evt_bh - DevStatusChange evt bottomhalf + * @mrioc: Adapter instance reference + * @dev_pg0: New device page0 + * + * Process Device Status Change event and based on device's new + * information, either expose the device to the upper layers, or + * remove the device from upper layers. + * + * Return: Nothing. + */ +static void mpi3mr_devstatuschg_evt_bh(struct mpi3mr_ioc *mrioc, + struct mpi3mr_fwevt *fwevt) +{ + u16 dev_handle = 0; + u8 uhide = 0, delete = 0, cleanup = 0; + struct mpi3mr_tgt_dev *tgtdev = NULL; + Mpi3EventDataDeviceStatusChange_t *evtdata = + (Mpi3EventDataDeviceStatusChange_t *)fwevt->event_data; + + + dev_handle = le16_to_cpu(evtdata->DevHandle); + ioc_info(mrioc, + "%s :device status change: handle(0x%04x): reason code(0x%x)\n", + __func__, dev_handle, evtdata->ReasonCode); + switch (evtdata->ReasonCode) { + case MPI3_EVENT_DEV_STAT_RC_HIDDEN: + delete = 1; + break; + case MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN: + uhide = 1; + break; + case MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING: + delete = 1; + cleanup = 1; + break; + default: + ioc_info(mrioc, "%s :Unhandled reason code(0x%x)\n", __func__, + evtdata->ReasonCode); + break; + } + + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle); + if (!tgtdev) + goto out; + if (uhide) { + tgtdev->is_hidden = 0; + if (!tgtdev->host_exposed) + mpi3mr_report_tgtdev_to_host(mrioc, tgtdev->perst_id); + } + if (tgtdev->starget && tgtdev->starget->hostdata) { + if (delete) + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); + } + if (cleanup) { + mpi3mr_tgtdev_del_from_list(mrioc, tgtdev); + mpi3mr_tgtdev_put(tgtdev); + } + +out: + if (tgtdev) + mpi3mr_tgtdev_put(tgtdev); + +} + +/** + * mpi3mr_devinfochg_evt_bh - DeviceInfoChange evt bottomhalf + * @mrioc: Adapter instance reference + * @dev_pg0: New device page0 + * + * Process Device Info Change event and based on device's new + * information, either expose the device to the upper layers, or + * remove the device from upper layers or update the details of + * the device. + * + * Return: Nothing. + */ +static void mpi3mr_devinfochg_evt_bh(struct mpi3mr_ioc *mrioc, + Mpi3DevicePage0_t *dev_pg0) +{ + struct mpi3mr_tgt_dev *tgtdev = NULL; + u16 dev_handle = 0, perst_id = 0; + + perst_id = le16_to_cpu(dev_pg0->PersistentID); + dev_handle = le16_to_cpu(dev_pg0->DevHandle); + ioc_info(mrioc, + "%s :Device info change: handle(0x%04x): persist_id(0x%x)\n", + __func__, dev_handle, perst_id); + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle); + if (!tgtdev) + goto out; + mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0); + if (!tgtdev->is_hidden && !tgtdev->host_exposed) + mpi3mr_report_tgtdev_to_host(mrioc, perst_id); + if (tgtdev->is_hidden && tgtdev->host_exposed) + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); +out: + if (tgtdev) + mpi3mr_tgtdev_put(tgtdev); + +} + +/** + * mpi3mr_sastopochg_evt_bh - SASTopologyChange evt bottomhalf + * @mrioc: Adapter instance reference + * @fwevt: Firmware event reference + * + * Prints information about the SAS topology change event and + * for "not responding" event code, removes the device from the + * upper layers. + * + * Return: Nothing. + */ +static void mpi3mr_sastopochg_evt_bh(struct mpi3mr_ioc *mrioc, + struct mpi3mr_fwevt *fwevt) +{ + Mpi3EventDataSasTopologyChangeList_t *event_data = + (Mpi3EventDataSasTopologyChangeList_t *)fwevt->event_data; + int i; + u16 handle; + u8 reason_code; + struct mpi3mr_tgt_dev *tgtdev = NULL; + + for (i = 0; i < event_data->NumEntries; i++) { + handle = le16_to_cpu(event_data->PhyEntry[i].AttachedDevHandle); + if (!handle) + continue; + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle); + if (!tgtdev) + continue; + + reason_code = event_data->PhyEntry[i].Status & + MPI3_EVENT_SAS_TOPO_PHY_RC_MASK; + + switch (reason_code) { + case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING: + if (tgtdev->host_exposed) + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); + mpi3mr_tgtdev_del_from_list(mrioc, tgtdev); + mpi3mr_tgtdev_put(tgtdev); + break; + default: + break; + } + if (tgtdev) + mpi3mr_tgtdev_put(tgtdev); + } +} + +/** + * mpi3mr_fwevt_bh - Firmware event bottomhalf handler + * @mrioc: Adapter instance reference + * @fwevt: Firmware event reference + * + * Identifies the firmware event and calls corresponding bottomg + * half handler and sends event acknowledgment if required. + * + * Return: Nothing. + */ +static void mpi3mr_fwevt_bh(struct mpi3mr_ioc *mrioc, + struct mpi3mr_fwevt *fwevt) +{ + mrioc->current_event = fwevt; + mpi3mr_fwevt_del_from_list(mrioc, fwevt); + + if (mrioc->stop_drv_processing) + goto out; + + if (!fwevt->process_evt) + goto evt_ack; + + switch (fwevt->event_id) { + case MPI3_EVENT_DEVICE_ADDED: + { + Mpi3DevicePage0_t *dev_pg0 = + (Mpi3DevicePage0_t *) fwevt->event_data; + mpi3mr_report_tgtdev_to_host(mrioc, + le16_to_cpu(dev_pg0->PersistentID)); + break; + } + case MPI3_EVENT_DEVICE_INFO_CHANGED: + { + mpi3mr_devinfochg_evt_bh(mrioc, + (Mpi3DevicePage0_t *) fwevt->event_data); + break; + } + case MPI3_EVENT_DEVICE_STATUS_CHANGE: + { + mpi3mr_devstatuschg_evt_bh(mrioc, fwevt); + break; + } + case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + { + mpi3mr_sastopochg_evt_bh(mrioc, fwevt); + break; + } + default: + break; + } + +evt_ack: + if (fwevt->send_ack) + mpi3mr_send_event_ack(mrioc, fwevt->event_id, + fwevt->evt_ctx); +out: + /* Put fwevt reference count to neutralize kref_init increment */ + mpi3mr_fwevt_put(fwevt); + mrioc->current_event = NULL; + +} + +/** + * mpi3mr_fwevt_worker - Firmware event worker + * @work: Work struct containing firmware event + * + * Extracts the firmware event and calls mpi3mr_fwevt_bh. + * + * Return: Nothing. + */ +static void mpi3mr_fwevt_worker(struct work_struct *work) +{ + struct mpi3mr_fwevt *fwevt = container_of(work, struct mpi3mr_fwevt, + work); + mpi3mr_fwevt_bh(fwevt->mrioc, fwevt); + /* + * Put fwevt reference count after + * dequeuing it from worker queue + */ + mpi3mr_fwevt_put(fwevt); +} + + +/** + * mpi3mr_create_tgtdev - Create and add a target device + * @mrioc: Adapter instance reference + * @dev_pg0: Device Page 0 data + * + * If the device specified by the device page 0 data is not + * present in the driver's internal list, allocate the memory + * for the device, populate the data and add to the list, else + * update the device data. The key is persistent ID. + * + * Return: 0 on success, -ENOMEM on memory allocation failure + */ +static int mpi3mr_create_tgtdev(struct mpi3mr_ioc *mrioc, + Mpi3DevicePage0_t *dev_pg0) +{ + int retval = 0; + struct mpi3mr_tgt_dev *tgtdev = NULL; + u16 perst_id = 0; + + perst_id = le16_to_cpu(dev_pg0->PersistentID); + tgtdev = mpi3mr_get_tgtdev_by_perst_id(mrioc, perst_id); + if (tgtdev) { + mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0); + mpi3mr_tgtdev_put(tgtdev); + } else { + tgtdev = mpi3mr_alloc_tgtdev(); + if (!tgtdev) + return -ENOMEM; + mpi3mr_update_tgtdev(mrioc, tgtdev, dev_pg0); + mpi3mr_tgtdev_add_to_list(mrioc, tgtdev); + } + + return retval; +} + +/** + * mpi3mr_flush_delayed_rmhs_list - Flush pending commands + * @mrioc: Adapter instance reference + * @cmdparam: Internal command tracker + * + * Flush pending commands in the delayed removal handshake list + * due to a controller reset or driver removal as a cleanup. + * + * Return: Nothing + */ +void mpi3mr_flush_delayed_rmhs_list(struct mpi3mr_ioc *mrioc) +{ + struct delayed_dev_rmhs_node *_rmhs_node; + + while (!list_empty(&mrioc->delayed_rmhs_list)) { + _rmhs_node = list_entry(mrioc->delayed_rmhs_list.next, + struct delayed_dev_rmhs_node, list); + list_del(&_rmhs_node->list); + kfree(_rmhs_node); + } +} + +/** + * mpi3mr_dev_rmhs_complete_iou - Device removal IOUC completion + * @mrioc: Adapter instance reference + * @cmdparam: Internal command tracker + * + * Issues a target reset TM to the firmware from the device + * removal TM pend list or retry the removal handshake sequence + * based on the IOU control request IOC status. + * + * Return: Nothing + */ +static void mpi3mr_dev_rmhs_complete_iou(struct mpi3mr_ioc *mrioc, + struct mpi3mr_drv_cmd *drv_cmd) +{ + u16 cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; + struct delayed_dev_rmhs_node *delayed_dev_rmhs = NULL; + + ioc_info(mrioc, + "%s :dev_rmhs_iouctrl_complete:handle(0x%04x), ioc_status(0x%04x), loginfo(0x%08x)\n", + __func__, drv_cmd->dev_handle, drv_cmd->ioc_status, + drv_cmd->ioc_loginfo); + if (drv_cmd->ioc_status != MPI3_IOCSTATUS_SUCCESS) { + if (drv_cmd->retry_count < MPI3MR_DEV_RMHS_RETRY_COUNT) { + drv_cmd->retry_count++; + ioc_info(mrioc, + "%s :dev_rmhs_iouctrl_complete: handle(0x%04x)retrying handshake retry=%d\n", + __func__, drv_cmd->dev_handle, + drv_cmd->retry_count); + mpi3mr_dev_rmhs_send_tm(mrioc, drv_cmd->dev_handle, + drv_cmd, drv_cmd->iou_rc); + return; + } + ioc_err(mrioc, + "%s :dev removal handshake failed after all retries: handle(0x%04x)\n", + __func__, drv_cmd->dev_handle); + } else { + ioc_info(mrioc, + "%s :dev removal handshake completed successfully: handle(0x%04x)\n", + __func__, drv_cmd->dev_handle); + clear_bit(drv_cmd->dev_handle, mrioc->removepend_bitmap); + } + + if (!list_empty(&mrioc->delayed_rmhs_list)) { + delayed_dev_rmhs = list_entry(mrioc->delayed_rmhs_list.next, + struct delayed_dev_rmhs_node, list); + drv_cmd->dev_handle = delayed_dev_rmhs->handle; + drv_cmd->retry_count = 0; + drv_cmd->iou_rc = delayed_dev_rmhs->iou_rc; + ioc_info(mrioc, + "%s :dev_rmhs_iouctrl_complete: processing delayed TM: handle(0x%04x)\n", + __func__, drv_cmd->dev_handle); + mpi3mr_dev_rmhs_send_tm(mrioc, drv_cmd->dev_handle, drv_cmd, + drv_cmd->iou_rc); + list_del(&delayed_dev_rmhs->list); + kfree(delayed_dev_rmhs); + return; + } + drv_cmd->state = MPI3MR_CMD_NOTUSED; + drv_cmd->callback = NULL; + drv_cmd->retry_count = 0; + drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE; + clear_bit(cmd_idx, mrioc->devrem_bitmap); +} + +/** + * mpi3mr_dev_rmhs_complete_tm - Device removal TM completion + * @mrioc: Adapter instance reference + * @cmdparam: Internal command tracker + * + * Issues a target reset TM to the firmware from the device + * removal TM pend list or issue IO Unit control request as + * part of device removal or hidden acknowledgment handshake. + * + * Return: Nothing + */ +static void mpi3mr_dev_rmhs_complete_tm(struct mpi3mr_ioc *mrioc, + struct mpi3mr_drv_cmd *drv_cmd) +{ + Mpi3IoUnitControlRequest_t iou_ctrl; + u16 cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; + Mpi3SCSITaskMgmtReply_t *tm_reply = NULL; + int retval; + + if (drv_cmd->state & MPI3MR_CMD_REPLY_VALID) + tm_reply = (Mpi3SCSITaskMgmtReply_t *)drv_cmd->reply; + + if (tm_reply) + pr_info(IOCNAME + "dev_rmhs_tr_complete:handle(0x%04x), ioc_status(0x%04x), loginfo(0x%08x), term_count(%d)\n", + mrioc->name, drv_cmd->dev_handle, drv_cmd->ioc_status, + drv_cmd->ioc_loginfo, + le32_to_cpu(tm_reply->TerminationCount)); + + pr_info(IOCNAME "Issuing IOU CTL: handle(0x%04x) dev_rmhs idx(%d)\n", + mrioc->name, drv_cmd->dev_handle, cmd_idx); + + memset(&iou_ctrl, 0, sizeof(iou_ctrl)); + + drv_cmd->state = MPI3MR_CMD_PENDING; + drv_cmd->is_waiting = 0; + drv_cmd->callback = mpi3mr_dev_rmhs_complete_iou; + iou_ctrl.Operation = drv_cmd->iou_rc; + iou_ctrl.Param16[0] = cpu_to_le16(drv_cmd->dev_handle); + iou_ctrl.HostTag = cpu_to_le16(drv_cmd->host_tag); + iou_ctrl.Function = MPI3_FUNCTION_IO_UNIT_CONTROL; + + retval = mpi3mr_admin_request_post(mrioc, &iou_ctrl, sizeof(iou_ctrl), + 1); + if (retval) { + pr_err(IOCNAME "Issue DevRmHsTMIOUCTL: Admin post failed\n", + mrioc->name); + goto out_failed; + } + + return; +out_failed: + drv_cmd->state = MPI3MR_CMD_NOTUSED; + drv_cmd->callback = NULL; + drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE; + drv_cmd->retry_count = 0; + clear_bit(cmd_idx, mrioc->devrem_bitmap); +} + +/** + * mpi3mr_dev_rmhs_send_tm - Issue TM for device removal + * @mrioc: Adapter instance reference + * @handle: Device handle + * @cmdparam: Internal command tracker + * @iou_rc: IO Unit reason code + * + * Issues a target reset TM to the firmware or add it to a pend + * list as part of device removal or hidden acknowledgment + * handshake. + * + * Return: Nothing + */ +static void mpi3mr_dev_rmhs_send_tm(struct mpi3mr_ioc *mrioc, u16 handle, + struct mpi3mr_drv_cmd *cmdparam, u8 iou_rc) +{ + Mpi3SCSITaskMgmtRequest_t tm_req; + int retval = 0; + u16 cmd_idx = MPI3MR_NUM_DEVRMCMD; + u8 retrycount = 5; + struct mpi3mr_drv_cmd *drv_cmd = cmdparam; + struct delayed_dev_rmhs_node *delayed_dev_rmhs = NULL; + + if (drv_cmd) + goto issue_cmd; + do { + cmd_idx = find_first_zero_bit(mrioc->devrem_bitmap, + MPI3MR_NUM_DEVRMCMD); + if (cmd_idx < MPI3MR_NUM_DEVRMCMD) { + if (!test_and_set_bit(cmd_idx, mrioc->devrem_bitmap)) + break; + cmd_idx = MPI3MR_NUM_DEVRMCMD; + } + } while (retrycount--); + + if (cmd_idx >= MPI3MR_NUM_DEVRMCMD) { + delayed_dev_rmhs = kzalloc(sizeof(*delayed_dev_rmhs), + GFP_ATOMIC); + if (!delayed_dev_rmhs) + return; + INIT_LIST_HEAD(&delayed_dev_rmhs->list); + delayed_dev_rmhs->handle = handle; + delayed_dev_rmhs->iou_rc = iou_rc; + list_add_tail(&delayed_dev_rmhs->list, + &mrioc->delayed_rmhs_list); + ioc_info(mrioc, "%s :DevRmHs: tr:handle(0x%04x) is postponed\n", + __func__, handle); + return; + } + drv_cmd = &mrioc->dev_rmhs_cmds[cmd_idx]; + +issue_cmd: + cmd_idx = drv_cmd->host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; + ioc_info(mrioc, + "%s :Issuing TR TM: for devhandle 0x%04x with dev_rmhs %d\n", + __func__, handle, cmd_idx); + + memset(&tm_req, 0, sizeof(tm_req)); + if (drv_cmd->state & MPI3MR_CMD_PENDING) { + ioc_err(mrioc, "%s :Issue TM: Command is in use\n", __func__); + goto out; + } + drv_cmd->state = MPI3MR_CMD_PENDING; + drv_cmd->is_waiting = 0; + drv_cmd->callback = mpi3mr_dev_rmhs_complete_tm; + drv_cmd->dev_handle = handle; + drv_cmd->iou_rc = iou_rc; + tm_req.DevHandle = cpu_to_le16(handle); + tm_req.TaskType = MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET; + tm_req.HostTag = cpu_to_le16(drv_cmd->host_tag); + tm_req.TaskHostTag = cpu_to_le16(MPI3MR_HOSTTAG_INVALID); + tm_req.Function = MPI3_FUNCTION_SCSI_TASK_MGMT; + + set_bit(handle, mrioc->removepend_bitmap); + retval = mpi3mr_admin_request_post(mrioc, &tm_req, sizeof(tm_req), 1); + if (retval) { + ioc_err(mrioc, "%s :Issue DevRmHsTM: Admin Post failed\n", + __func__); + goto out_failed; + } +out: + return; +out_failed: + drv_cmd->state = MPI3MR_CMD_NOTUSED; + drv_cmd->callback = NULL; + drv_cmd->dev_handle = MPI3MR_INVALID_DEV_HANDLE; + drv_cmd->retry_count = 0; + clear_bit(cmd_idx, mrioc->devrem_bitmap); +} + +/** + * mpi3mr_sastopochg_evt_th - SASTopologyChange evt tophalf + * @mrioc: Adapter instance reference + * @event_reply: Event data + * + * Checks for the reason code and based on that either block I/O + * to device, or unblock I/O to the device, or start the device + * removal handshake with reason as remove with the firmware for + * SAS/SATA devices. + * + * Return: Nothing + */ +static void mpi3mr_sastopochg_evt_th(struct mpi3mr_ioc *mrioc, + Mpi3EventNotificationReply_t *event_reply) +{ + Mpi3EventDataSasTopologyChangeList_t *topo_evt = + (Mpi3EventDataSasTopologyChangeList_t *)event_reply->EventData; + int i; + u16 handle; + u8 reason_code; + struct mpi3mr_tgt_dev *tgtdev = NULL; + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL; + + for (i = 0; i < topo_evt->NumEntries; i++) { + handle = le16_to_cpu(topo_evt->PhyEntry[i].AttachedDevHandle); + if (!handle) + continue; + reason_code = topo_evt->PhyEntry[i].Status & + MPI3_EVENT_SAS_TOPO_PHY_RC_MASK; + scsi_tgt_priv_data = NULL; + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, handle); + if (tgtdev && tgtdev->starget && tgtdev->starget->hostdata) + scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *) + tgtdev->starget->hostdata; + switch (reason_code) { + case MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING: + if (scsi_tgt_priv_data) { + scsi_tgt_priv_data->dev_removed = 1; + scsi_tgt_priv_data->dev_removedelay = 0; + atomic_set(&scsi_tgt_priv_data->block_io, 0); + } + mpi3mr_dev_rmhs_send_tm(mrioc, handle, NULL, + MPI3_CTRL_OP_REMOVE_DEVICE); + break; + case MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING: + if (scsi_tgt_priv_data) { + scsi_tgt_priv_data->dev_removedelay = 1; + atomic_inc(&scsi_tgt_priv_data->block_io); + } + break; + case MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING: + if (scsi_tgt_priv_data && + scsi_tgt_priv_data->dev_removedelay) { + scsi_tgt_priv_data->dev_removedelay = 0; + atomic_dec_if_positive + (&scsi_tgt_priv_data->block_io); + } + case MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED: + default: + break; + } + if (tgtdev) + mpi3mr_tgtdev_put(tgtdev); + } + +} + +/** + * mpi3mr_devstatuschg_evt_th - DeviceStatusChange evt tophalf + * @mrioc: Adapter instance reference + * @event_reply: Event data + * + * Checks for the reason code and based on that either block I/O + * to device, or unblock I/O to the device, or start the device + * removal handshake with reason as remove/hide acknowledgment + * with the firmware. + * + * Return: Nothing + */ +static void mpi3mr_devstatuschg_evt_th(struct mpi3mr_ioc *mrioc, + Mpi3EventNotificationReply_t *event_reply) +{ + u16 dev_handle = 0; + u8 ublock = 0, block = 0, hide = 0, delete = 0, remove = 0; + struct mpi3mr_tgt_dev *tgtdev = NULL; + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data = NULL; + Mpi3EventDataDeviceStatusChange_t *evtdata = + (Mpi3EventDataDeviceStatusChange_t *) event_reply->EventData; + + if (mrioc->stop_drv_processing) + goto out; + + dev_handle = le16_to_cpu(evtdata->DevHandle); + + switch (evtdata->ReasonCode) { + case MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT: + case MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT: + block = 1; + break; + case MPI3_EVENT_DEV_STAT_RC_HIDDEN: + delete = 1; + hide = 1; + break; + case MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING: + delete = 1; + remove = 1; + break; + case MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP: + case MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP: + ublock = 1; + break; + default: + break; + } + + tgtdev = mpi3mr_get_tgtdev_by_handle(mrioc, dev_handle); + if (!tgtdev) + goto out; + if (hide) + tgtdev->is_hidden = hide; + if (tgtdev->starget && tgtdev->starget->hostdata) { + scsi_tgt_priv_data = (struct mpi3mr_stgt_priv_data *) + tgtdev->starget->hostdata; + if (block) + atomic_inc(&scsi_tgt_priv_data->block_io); + if (delete) + scsi_tgt_priv_data->dev_removed = 1; + if (ublock) + atomic_dec_if_positive(&scsi_tgt_priv_data->block_io); + } + if (remove) + mpi3mr_dev_rmhs_send_tm(mrioc, dev_handle, NULL, + MPI3_CTRL_OP_REMOVE_DEVICE); + if (hide) + mpi3mr_dev_rmhs_send_tm(mrioc, dev_handle, NULL, + MPI3_CTRL_OP_HIDDEN_ACK); + +out: + if (tgtdev) + mpi3mr_tgtdev_put(tgtdev); + +} + +/** + * mpi3mr_os_handle_events - Firmware event handler + * @mrioc: Adapter instance reference + * @event_reply: Event data + * + * Identify whteher the event has to handled and acknowledged + * and either process the event in the tophalf and/or schedule a + * bottom half through mpi3mr_fwevt_worker. + * + * Return: Nothing + */ +void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc, + Mpi3EventNotificationReply_t *event_reply) +{ + u16 evt_type, sz; + struct mpi3mr_fwevt *fwevt = NULL; + bool ack_req = 0, process_evt_bh = 0; + + if (mrioc->stop_drv_processing) + return; + + if ((event_reply->MsgFlags & MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK) + == MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED) + ack_req = 1; + + evt_type = event_reply->Event; + + switch (evt_type) { + case MPI3_EVENT_DEVICE_ADDED: + { + Mpi3DevicePage0_t *dev_pg0 = + (Mpi3DevicePage0_t *) event_reply->EventData; + if (mpi3mr_create_tgtdev(mrioc, dev_pg0)) + ioc_err(mrioc, + "%s :Failed to add device in the device add event\n", + __func__); + else + process_evt_bh = 1; + break; + } + case MPI3_EVENT_DEVICE_STATUS_CHANGE: + { + process_evt_bh = 1; + mpi3mr_devstatuschg_evt_th(mrioc, event_reply); + break; + } + case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + { + process_evt_bh = 1; + mpi3mr_sastopochg_evt_th(mrioc, event_reply); + break; + } + case MPI3_EVENT_DEVICE_INFO_CHANGED: + { + process_evt_bh = 1; + break; + } + case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE: + case MPI3_EVENT_SAS_DISCOVERY: + case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR: + break; + default: + ioc_info(mrioc, "%s :Event 0x%02x is not handled\n", + __func__, evt_type); + break; + } + if (process_evt_bh || ack_req) { + sz = event_reply->EventDataLength * 4; + fwevt = mpi3mr_alloc_fwevt(sz); + if (!fwevt) { + ioc_info(mrioc, "%s :failure at %s:%d/%s()!\n", + __func__, __FILE__, __LINE__, __func__); + return; + } + + memcpy(fwevt->event_data, event_reply->EventData, sz); + fwevt->mrioc = mrioc; + fwevt->event_id = evt_type; + fwevt->send_ack = ack_req; + fwevt->process_evt = process_evt_bh; + fwevt->evt_ctx = le32_to_cpu(event_reply->EventContext); + mpi3mr_fwevt_add_to_list(mrioc, fwevt); + } + +} + /** * mpi3mr_process_op_reply_desc - reply descriptor handler * @mrioc: Adapter instance reference @@ -587,6 +1862,33 @@ static int mpi3mr_scan_finished(struct Scsi_Host *shost, */ static void mpi3mr_slave_destroy(struct scsi_device *sdev) { + struct Scsi_Host *shost; + struct mpi3mr_ioc *mrioc; + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; + struct mpi3mr_tgt_dev *tgt_dev; + unsigned long flags; + struct scsi_target *starget; + + if (!sdev->hostdata) + return; + + starget = scsi_target(sdev); + shost = dev_to_shost(&starget->dev); + mrioc = shost_priv(shost); + scsi_tgt_priv_data = starget->hostdata; + + scsi_tgt_priv_data->num_luns--; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id); + if (tgt_dev && (!scsi_tgt_priv_data->num_luns)) + tgt_dev->starget = NULL; + if (tgt_dev) + mpi3mr_tgtdev_put(tgt_dev); + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + + kfree(sdev->hostdata); + sdev->hostdata = NULL; } /** @@ -599,6 +1901,35 @@ static void mpi3mr_slave_destroy(struct scsi_device *sdev) */ static void mpi3mr_target_destroy(struct scsi_target *starget) { + struct Scsi_Host *shost; + struct mpi3mr_ioc *mrioc; + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; + struct mpi3mr_tgt_dev *tgt_dev; + unsigned long flags; + + if (!starget->hostdata) + return; + + shost = dev_to_shost(&starget->dev); + mrioc = shost_priv(shost); + scsi_tgt_priv_data = starget->hostdata; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgt_dev = __mpi3mr_get_tgtdev_from_tgtpriv(mrioc, scsi_tgt_priv_data); + if (tgt_dev && (tgt_dev->starget == starget) && + (tgt_dev->perst_id == starget->id)) + tgt_dev->starget = NULL; + if (tgt_dev) { + scsi_tgt_priv_data->tgt_dev = NULL; + scsi_tgt_priv_data->perst_id = 0; + mpi3mr_tgtdev_put(tgt_dev); + mpi3mr_tgtdev_put(tgt_dev); + } + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + + kfree(starget->hostdata); + starget->hostdata = NULL; + } /** @@ -612,7 +1943,25 @@ static void mpi3mr_target_destroy(struct scsi_target *starget) */ static int mpi3mr_slave_configure(struct scsi_device *sdev) { + struct scsi_target *starget; + struct Scsi_Host *shost; + struct mpi3mr_ioc *mrioc; + struct mpi3mr_tgt_dev *tgt_dev; + unsigned long flags; int retval = 0; + + starget = scsi_target(sdev); + shost = dev_to_shost(&starget->dev); + mrioc = shost_priv(shost); + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id); + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + if (!tgt_dev) + return retval; + + mpi3mr_tgtdev_put(tgt_dev); + return retval; } @@ -626,7 +1975,37 @@ static int mpi3mr_slave_configure(struct scsi_device *sdev) */ static int mpi3mr_slave_alloc(struct scsi_device *sdev) { + struct Scsi_Host *shost; + struct mpi3mr_ioc *mrioc; + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; + struct mpi3mr_tgt_dev *tgt_dev; + struct mpi3mr_sdev_priv_data *scsi_dev_priv_data; + unsigned long flags; + struct scsi_target *starget; int retval = 0; + + starget = scsi_target(sdev); + shost = dev_to_shost(&starget->dev); + mrioc = shost_priv(shost); + scsi_tgt_priv_data = starget->hostdata; + + scsi_dev_priv_data = kzalloc(sizeof(*scsi_dev_priv_data), GFP_KERNEL); + if (!scsi_dev_priv_data) + return -ENOMEM; + + scsi_dev_priv_data->lun_id = sdev->lun; + scsi_dev_priv_data->tgt_priv_data = scsi_tgt_priv_data; + sdev->hostdata = scsi_dev_priv_data; + + scsi_tgt_priv_data->num_luns++; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id); + if (tgt_dev && (tgt_dev->starget == NULL)) + tgt_dev->starget = starget; + if (tgt_dev) + mpi3mr_tgtdev_put(tgt_dev); + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); return retval; } @@ -640,7 +2019,33 @@ static int mpi3mr_slave_alloc(struct scsi_device *sdev) */ static int mpi3mr_target_alloc(struct scsi_target *starget) { + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + struct mpi3mr_ioc *mrioc = shost_priv(shost); + struct mpi3mr_stgt_priv_data *scsi_tgt_priv_data; + struct mpi3mr_tgt_dev *tgt_dev; + unsigned long flags; int retval = -ENODEV; + + scsi_tgt_priv_data = kzalloc(sizeof(*scsi_tgt_priv_data), GFP_KERNEL); + if (!scsi_tgt_priv_data) + return -ENOMEM; + + starget->hostdata = scsi_tgt_priv_data; + scsi_tgt_priv_data->starget = starget; + scsi_tgt_priv_data->dev_handle = MPI3MR_INVALID_DEV_HANDLE; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgt_dev = __mpi3mr_get_tgtdev_by_perst_id(mrioc, starget->id); + if (tgt_dev && !tgt_dev->is_hidden) { + scsi_tgt_priv_data->dev_handle = tgt_dev->dev_handle; + scsi_tgt_priv_data->perst_id = tgt_dev->perst_id; + scsi_tgt_priv_data->dev_type = tgt_dev->dev_type; + scsi_tgt_priv_data->tgt_dev = tgt_dev; + tgt_dev->starget = starget; + atomic_set(&scsi_tgt_priv_data->block_io, 0); + retval = 0; + } + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); return retval; } @@ -836,7 +2241,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct mpi3mr_ioc *mrioc = NULL; struct Scsi_Host *shost = NULL; - int retval = 0; + int retval = 0, i; shost = scsi_host_alloc(&mpi3mr_driver_template, sizeof(struct mpi3mr_ioc)); @@ -857,11 +2262,21 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) spin_lock_init(&mrioc->admin_req_lock); spin_lock_init(&mrioc->reply_free_queue_lock); spin_lock_init(&mrioc->sbq_lock); + spin_lock_init(&mrioc->fwevt_lock); + spin_lock_init(&mrioc->tgtdev_lock); spin_lock_init(&mrioc->watchdog_lock); spin_lock_init(&mrioc->chain_buf_lock); + INIT_LIST_HEAD(&mrioc->fwevt_list); + INIT_LIST_HEAD(&mrioc->tgtdev_list); + INIT_LIST_HEAD(&mrioc->delayed_rmhs_list); + mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS); + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) + mpi3mr_init_drv_cmd(&mrioc->dev_rmhs_cmds[i], + MPI3MR_HOSTTAG_DEVRMCMD_MIN + i); + if (pdev->revision) mrioc->enable_segqueue = true; @@ -877,6 +2292,17 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) shost->max_channel = 1; shost->max_id = 0xFFFFFFFF; + snprintf(mrioc->fwevt_worker_name, sizeof(mrioc->fwevt_worker_name), + "%s%d_fwevt_wrkr", mrioc->driver_name, mrioc->id); + mrioc->fwevt_worker_thread = alloc_ordered_workqueue( + mrioc->fwevt_worker_name, WQ_MEM_RECLAIM); + if (!mrioc->fwevt_worker_thread) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + retval = -ENODEV; + goto out_fwevtthread_failed; + } + mrioc->is_driver_loading = 1; if (mpi3mr_init_ioc(mrioc)) { ioc_err(mrioc, "failure at %s:%d/%s()!\n", @@ -903,6 +2329,8 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) addhost_failed: mpi3mr_cleanup_ioc(mrioc); out_iocinit_failed: + destroy_workqueue(mrioc->fwevt_worker_thread); +out_fwevtthread_failed: spin_lock(&mrioc_list_lock); list_del(&mrioc->list); spin_unlock(&mrioc_list_lock); @@ -924,14 +2352,30 @@ static void mpi3mr_remove(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct mpi3mr_ioc *mrioc; + struct workqueue_struct *wq; + unsigned long flags; + struct mpi3mr_tgt_dev *tgtdev, *tgtdev_next; mrioc = shost_priv(shost); while (mrioc->reset_in_progress || mrioc->is_driver_loading) ssleep(1); mrioc->stop_drv_processing = 1; + mpi3mr_cleanup_fwevt_list(mrioc); + spin_lock_irqsave(&mrioc->fwevt_lock, flags); + wq = mrioc->fwevt_worker_thread; + mrioc->fwevt_worker_thread = NULL; + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); + if (wq) + destroy_workqueue(wq); scsi_remove_host(shost); + list_for_each_entry_safe(tgtdev, tgtdev_next, &mrioc->tgtdev_list, + list) { + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); + mpi3mr_tgtdev_del_from_list(mrioc, tgtdev); + mpi3mr_tgtdev_put(tgtdev); + } mpi3mr_cleanup_ioc(mrioc); @@ -955,6 +2399,8 @@ static void mpi3mr_shutdown(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct mpi3mr_ioc *mrioc; + struct workqueue_struct *wq; + unsigned long flags; if (!shost) return; @@ -963,6 +2409,13 @@ static void mpi3mr_shutdown(struct pci_dev *pdev) while (mrioc->reset_in_progress || mrioc->is_driver_loading) ssleep(1); mrioc->stop_drv_processing = 1; + mpi3mr_cleanup_fwevt_list(mrioc); + spin_lock_irqsave(&mrioc->fwevt_lock, flags); + wq = mrioc->fwevt_worker_thread; + mrioc->fwevt_worker_thread = NULL; + spin_unlock_irqrestore(&mrioc->fwevt_lock, flags); + if (wq) + destroy_workqueue(wq); mpi3mr_cleanup_ioc(mrioc);
Firmware can report various MPI Events. Support for certain Events (as listed below) are enabled in the driver and their processing in driver is covered in this patch. MPI3_EVENT_DEVICE_ADDED MPI3_EVENT_DEVICE_INFO_CHANGED MPI3_EVENT_DEVICE_STATUS_CHANGE MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST MPI3_EVENT_SAS_DISCOVERY MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR Key support in this patch is device add/removal. Fix some compilation warning reported by kernel test robot. Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Reported-by: kernel test robot <lkp@intel.com> Cc: sathya.prakash@broadcom.com --- drivers/scsi/mpi3mr/mpi/mpi30_api.h | 2 + drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h | 2721 ++++++++++++++++++++++++++ drivers/scsi/mpi3mr/mpi/mpi30_sas.h | 46 + drivers/scsi/mpi3mr/mpi3mr.h | 202 ++++ drivers/scsi/mpi3mr/mpi3mr_fw.c | 194 +++- drivers/scsi/mpi3mr/mpi3mr_os.c | 1455 ++++++++++++++++++++++++++- 6 files changed, 4574 insertions(+), 2 deletions(-) create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_sas.h