diff mbox series

[RFC,2/2] ASoC: da732x: simplify code

Message ID 20210326221619.949961-3-pierre-louis.bossart@linux.intel.com (mailing list archive)
State Accepted
Commit 945b0b58c5d7c6640f9aad2096e4675bc7f5371c
Headers show
Series ASoC: remove cppchecks warnings on lm49453 and da732x | expand

Commit Message

Pierre-Louis Bossart March 26, 2021, 10:16 p.m. UTC
cppcheck reports a false positive:

sound/soc/codecs/da732x.c:1161:25: warning: Either the condition
'indiv<0' is redundant or there is division by zero at line
1161. [zerodivcond]
 fref = (da732x->sysclk / indiv);
                        ^
sound/soc/codecs/da732x.c:1158:12: note: Assuming that condition
'indiv<0' is not redundant
 if (indiv < 0)
           ^
sound/soc/codecs/da732x.c:1161:25: note: Division by zero
 fref = (da732x->sysclk / indiv);
                        ^

The code is awfully convoluted/confusing and can be simplified with a
single variable and the BIT macro.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/codecs/da732x.c | 17 ++++++-----------
 sound/soc/codecs/da732x.h | 12 ++++--------
 2 files changed, 10 insertions(+), 19 deletions(-)

Comments

Adam Thomson April 15, 2021, 4 p.m. UTC | #1
On 26 March 2021 22:16, Pierre-Louis Bossart wrote:

> cppcheck reports a false positive:
> 
> sound/soc/codecs/da732x.c:1161:25: warning: Either the condition
> 'indiv<0' is redundant or there is division by zero at line
> 1161. [zerodivcond]
>  fref = (da732x->sysclk / indiv);
>                         ^
> sound/soc/codecs/da732x.c:1158:12: note: Assuming that condition
> 'indiv<0' is not redundant
>  if (indiv < 0)
>            ^
> sound/soc/codecs/da732x.c:1161:25: note: Division by zero
>  fref = (da732x->sysclk / indiv);
>                         ^
> 
> The code is awfully convoluted/confusing and can be simplified with a
> single variable and the BIT macro.
> 
> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> ---

Apologies for the delay in getting to this. The change looks fine to me,
although this part was EOL some time back, and I find it hard to believe anyone
out there has a board with this on. Wondering if it would make sense to remove
the driver permanently?

For the change at hand though:

Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>

>  sound/soc/codecs/da732x.c | 17 ++++++-----------
>  sound/soc/codecs/da732x.h | 12 ++++--------
>  2 files changed, 10 insertions(+), 19 deletions(-)
> 
> diff --git a/sound/soc/codecs/da732x.c b/sound/soc/codecs/da732x.c
> index d43ee7159ae0..42d6a3fc3af5 100644
> --- a/sound/soc/codecs/da732x.c
> +++ b/sound/soc/codecs/da732x.c
> @@ -168,30 +168,25 @@ static const struct reg_default da732x_reg_cache[] = {
>  static inline int da732x_get_input_div(struct snd_soc_component *component,
> int sysclk)
>  {
>  	int val;
> -	int ret;
> 
>  	if (sysclk < DA732X_MCLK_10MHZ) {
> -		val = DA732X_MCLK_RET_0_10MHZ;
> -		ret = DA732X_MCLK_VAL_0_10MHZ;
> +		val = DA732X_MCLK_VAL_0_10MHZ;
>  	} else if ((sysclk >= DA732X_MCLK_10MHZ) &&
>  	    (sysclk < DA732X_MCLK_20MHZ)) {
> -		val = DA732X_MCLK_RET_10_20MHZ;
> -		ret = DA732X_MCLK_VAL_10_20MHZ;
> +		val = DA732X_MCLK_VAL_10_20MHZ;
>  	} else if ((sysclk >= DA732X_MCLK_20MHZ) &&
>  	    (sysclk < DA732X_MCLK_40MHZ)) {
> -		val = DA732X_MCLK_RET_20_40MHZ;
> -		ret = DA732X_MCLK_VAL_20_40MHZ;
> +		val = DA732X_MCLK_VAL_20_40MHZ;
>  	} else if ((sysclk >= DA732X_MCLK_40MHZ) &&
>  	    (sysclk <= DA732X_MCLK_54MHZ)) {
> -		val = DA732X_MCLK_RET_40_54MHZ;
> -		ret = DA732X_MCLK_VAL_40_54MHZ;
> +		val = DA732X_MCLK_VAL_40_54MHZ;
>  	} else {
>  		return -EINVAL;
>  	}
> 
>  	snd_soc_component_write(component, DA732X_REG_PLL_CTRL, val);
> 
> -	return ret;
> +	return val;
>  }
> 
>  static void da732x_set_charge_pump(struct snd_soc_component *component,
> int state)
> @@ -1158,7 +1153,7 @@ static int da732x_set_dai_pll(struct
> snd_soc_component *component, int pll_id,
>  	if (indiv < 0)
>  		return indiv;
> 
> -	fref = (da732x->sysclk / indiv);
> +	fref = da732x->sysclk / BIT(indiv);
>  	div_hi = freq_out / fref;
>  	frac_div = (u64)(freq_out % fref) * 8192ULL;
>  	do_div(frac_div, fref);
> diff --git a/sound/soc/codecs/da732x.h b/sound/soc/codecs/da732x.h
> index c5af17ee1516..c2f784c3f359 100644
> --- a/sound/soc/codecs/da732x.h
> +++ b/sound/soc/codecs/da732x.h
> @@ -48,14 +48,10 @@
>  #define	DA732X_MCLK_20MHZ		20000000
>  #define	DA732X_MCLK_40MHZ		40000000
>  #define	DA732X_MCLK_54MHZ		54000000
> -#define	DA732X_MCLK_RET_0_10MHZ		0
> -#define	DA732X_MCLK_VAL_0_10MHZ		1
> -#define	DA732X_MCLK_RET_10_20MHZ	1
> -#define	DA732X_MCLK_VAL_10_20MHZ	2
> -#define	DA732X_MCLK_RET_20_40MHZ	2
> -#define	DA732X_MCLK_VAL_20_40MHZ	4
> -#define	DA732X_MCLK_RET_40_54MHZ	3
> -#define	DA732X_MCLK_VAL_40_54MHZ	8
> +#define	DA732X_MCLK_VAL_0_10MHZ		0
> +#define	DA732X_MCLK_VAL_10_20MHZ	1
> +#define	DA732X_MCLK_VAL_20_40MHZ	2
> +#define	DA732X_MCLK_VAL_40_54MHZ	3
>  #define	DA732X_DAI_ID1			0
>  #define	DA732X_DAI_ID2			1
>  #define	DA732X_SRCCLK_PLL		0
> --
> 2.25.1
Mark Brown April 15, 2021, 4:04 p.m. UTC | #2
On Thu, Apr 15, 2021 at 04:00:48PM +0000, Adam Thomson wrote:
> On 26 March 2021 22:16, Pierre-Louis Bossart wrote:

> Apologies for the delay in getting to this. The change looks fine to me,
> although this part was EOL some time back, and I find it hard to believe anyone
> out there has a board with this on. Wondering if it would make sense to remove
> the driver permanently?

Unless it's actually getting in the way it's generally easier to just
leave the driver than try to figure out if anyone is updating a system
that uses it.
Adam Thomson April 15, 2021, 4:09 p.m. UTC | #3
On 15 April 2021 17:04, Mark Brown wrote:

> On Thu, Apr 15, 2021 at 04:00:48PM +0000, Adam Thomson wrote:
> > On 26 March 2021 22:16, Pierre-Louis Bossart wrote:
> 
> > Apologies for the delay in getting to this. The change looks fine to me,
> > although this part was EOL some time back, and I find it hard to believe anyone
> > out there has a board with this on. Wondering if it would make sense to
> remove
> > the driver permanently?
> 
> Unless it's actually getting in the way it's generally easier to just
> leave the driver than try to figure out if anyone is updating a system
> that uses it.

Fair enough. Just don't want to waste people's time with unnecessary updates :)
diff mbox series

Patch

diff --git a/sound/soc/codecs/da732x.c b/sound/soc/codecs/da732x.c
index d43ee7159ae0..42d6a3fc3af5 100644
--- a/sound/soc/codecs/da732x.c
+++ b/sound/soc/codecs/da732x.c
@@ -168,30 +168,25 @@  static const struct reg_default da732x_reg_cache[] = {
 static inline int da732x_get_input_div(struct snd_soc_component *component, int sysclk)
 {
 	int val;
-	int ret;
 
 	if (sysclk < DA732X_MCLK_10MHZ) {
-		val = DA732X_MCLK_RET_0_10MHZ;
-		ret = DA732X_MCLK_VAL_0_10MHZ;
+		val = DA732X_MCLK_VAL_0_10MHZ;
 	} else if ((sysclk >= DA732X_MCLK_10MHZ) &&
 	    (sysclk < DA732X_MCLK_20MHZ)) {
-		val = DA732X_MCLK_RET_10_20MHZ;
-		ret = DA732X_MCLK_VAL_10_20MHZ;
+		val = DA732X_MCLK_VAL_10_20MHZ;
 	} else if ((sysclk >= DA732X_MCLK_20MHZ) &&
 	    (sysclk < DA732X_MCLK_40MHZ)) {
-		val = DA732X_MCLK_RET_20_40MHZ;
-		ret = DA732X_MCLK_VAL_20_40MHZ;
+		val = DA732X_MCLK_VAL_20_40MHZ;
 	} else if ((sysclk >= DA732X_MCLK_40MHZ) &&
 	    (sysclk <= DA732X_MCLK_54MHZ)) {
-		val = DA732X_MCLK_RET_40_54MHZ;
-		ret = DA732X_MCLK_VAL_40_54MHZ;
+		val = DA732X_MCLK_VAL_40_54MHZ;
 	} else {
 		return -EINVAL;
 	}
 
 	snd_soc_component_write(component, DA732X_REG_PLL_CTRL, val);
 
-	return ret;
+	return val;
 }
 
 static void da732x_set_charge_pump(struct snd_soc_component *component, int state)
@@ -1158,7 +1153,7 @@  static int da732x_set_dai_pll(struct snd_soc_component *component, int pll_id,
 	if (indiv < 0)
 		return indiv;
 
-	fref = (da732x->sysclk / indiv);
+	fref = da732x->sysclk / BIT(indiv);
 	div_hi = freq_out / fref;
 	frac_div = (u64)(freq_out % fref) * 8192ULL;
 	do_div(frac_div, fref);
diff --git a/sound/soc/codecs/da732x.h b/sound/soc/codecs/da732x.h
index c5af17ee1516..c2f784c3f359 100644
--- a/sound/soc/codecs/da732x.h
+++ b/sound/soc/codecs/da732x.h
@@ -48,14 +48,10 @@ 
 #define	DA732X_MCLK_20MHZ		20000000
 #define	DA732X_MCLK_40MHZ		40000000
 #define	DA732X_MCLK_54MHZ		54000000
-#define	DA732X_MCLK_RET_0_10MHZ		0
-#define	DA732X_MCLK_VAL_0_10MHZ		1
-#define	DA732X_MCLK_RET_10_20MHZ	1
-#define	DA732X_MCLK_VAL_10_20MHZ	2
-#define	DA732X_MCLK_RET_20_40MHZ	2
-#define	DA732X_MCLK_VAL_20_40MHZ	4
-#define	DA732X_MCLK_RET_40_54MHZ	3
-#define	DA732X_MCLK_VAL_40_54MHZ	8
+#define	DA732X_MCLK_VAL_0_10MHZ		0
+#define	DA732X_MCLK_VAL_10_20MHZ	1
+#define	DA732X_MCLK_VAL_20_40MHZ	2
+#define	DA732X_MCLK_VAL_40_54MHZ	3
 #define	DA732X_DAI_ID1			0
 #define	DA732X_DAI_ID2			1
 #define	DA732X_SRCCLK_PLL		0