diff mbox series

[v1,1/2] fbtft: Rectify GPIO handling

Message ID 20210416123117.4993-1-andriy.shevchenko@linux.intel.com (mailing list archive)
State Superseded, archived
Headers show
Series [v1,1/2] fbtft: Rectify GPIO handling | expand

Commit Message

Andy Shevchenko April 16, 2021, 12:31 p.m. UTC
The infamous commit c440eee1a7a1 ("Staging: fbtft: Switch to
the GPIO descriptor interface") broke GPIO handling completely.
It has already four commits to rectify and it seems not enough.
In order to fix the mess here we:

  1) Set default to "inactive" for all requested pins

  2) Fix CS, RD, and WR pins polarity since it's active low and
     GPIO descriptor interface takes it into consideration from
     the Device Tree or ACPI

  3) Fix RESET pin polarity in the places missed by the commit
     b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")

  4) Consolidate chip activation (CS assert) under default
     ->reset() callback

To summarize the expectations about polarity for GPIOs:

   #RD			Low
   #WR			Low
   #CS			Low
   #RESET		Low
   DC or RS		High
   RW			High
   Data	0..15		High

See also Adafruit learning course [1] for the example of the schematics.

While at it, drop unneeded NULL checks, since GPIO API is tolerant to that.
At the end, update TODO to mark this job eventually done.

[1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads

Fixes: 92e3e884887c ("Staging: fbtft: Fix GPIO handling")
Fixes: b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")
Fixes: dbc4f989c878 ("Staging: fbtft: Fix probing of gpio descriptor")
Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc: Jan Sebastian Götte <linux@jaseg.net>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/staging/fbtft/TODO             |  5 -----
 drivers/staging/fbtft/fb_agm1264k-fl.c | 20 ++++++++++----------
 drivers/staging/fbtft/fb_bd663474.c    |  4 ----
 drivers/staging/fbtft/fb_ili9163.c     |  4 ----
 drivers/staging/fbtft/fb_ili9320.c     |  1 -
 drivers/staging/fbtft/fb_ili9325.c     |  4 ----
 drivers/staging/fbtft/fb_ili9340.c     |  1 -
 drivers/staging/fbtft/fb_s6d1121.c     |  4 ----
 drivers/staging/fbtft/fb_sh1106.c      |  1 -
 drivers/staging/fbtft/fb_ssd1289.c     |  4 ----
 drivers/staging/fbtft/fb_ssd1325.c     |  2 --
 drivers/staging/fbtft/fb_ssd1331.c     |  6 ++----
 drivers/staging/fbtft/fb_ssd1351.c     |  1 -
 drivers/staging/fbtft/fb_upd161704.c   |  4 ----
 drivers/staging/fbtft/fb_watterott.c   |  1 -
 drivers/staging/fbtft/fbtft-bus.c      |  3 +--
 drivers/staging/fbtft/fbtft-core.c     | 13 ++++++-------
 drivers/staging/fbtft/fbtft-io.c       | 12 ++++++------
 18 files changed, 25 insertions(+), 65 deletions(-)

Comments

Greg KH April 16, 2021, 12:51 p.m. UTC | #1
On Fri, Apr 16, 2021 at 03:31:16PM +0300, Andy Shevchenko wrote:
> The infamous commit c440eee1a7a1 ("Staging: fbtft: Switch to
> the GPIO descriptor interface") broke GPIO handling completely.
> It has already four commits to rectify and it seems not enough.
> In order to fix the mess here we:
> 
>   1) Set default to "inactive" for all requested pins
> 
>   2) Fix CS, RD, and WR pins polarity since it's active low and
>      GPIO descriptor interface takes it into consideration from
>      the Device Tree or ACPI
> 
>   3) Fix RESET pin polarity in the places missed by the commit
>      b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")
> 
>   4) Consolidate chip activation (CS assert) under default
>      ->reset() callback
> 
> To summarize the expectations about polarity for GPIOs:
> 
>    #RD			Low
>    #WR			Low
>    #CS			Low
>    #RESET		Low
>    DC or RS		High
>    RW			High
>    Data	0..15		High
> 
> See also Adafruit learning course [1] for the example of the schematics.
> 
> While at it, drop unneeded NULL checks, since GPIO API is tolerant to that.
> At the end, update TODO to mark this job eventually done.
> 
> [1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads

Shouldn't this be broken up into "one patch per thing" from your list
above?  Feels like you did a lot of different things all in the same
patch :(

thanks,

greg k-h
Andy Shevchenko April 16, 2021, 1:37 p.m. UTC | #2
On Fri, Apr 16, 2021 at 02:51:59PM +0200, Greg Kroah-Hartman wrote:
> On Fri, Apr 16, 2021 at 03:31:16PM +0300, Andy Shevchenko wrote:
> > The infamous commit c440eee1a7a1 ("Staging: fbtft: Switch to
> > the GPIO descriptor interface") broke GPIO handling completely.
> > It has already four commits to rectify and it seems not enough.
> > In order to fix the mess here we:
> > 
> >   1) Set default to "inactive" for all requested pins
> > 
> >   2) Fix CS, RD, and WR pins polarity since it's active low and
> >      GPIO descriptor interface takes it into consideration from
> >      the Device Tree or ACPI
> > 
> >   3) Fix RESET pin polarity in the places missed by the commit
> >      b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")
> > 
> >   4) Consolidate chip activation (CS assert) under default
> >      ->reset() callback
> > 
> > To summarize the expectations about polarity for GPIOs:
> > 
> >    #RD			Low
> >    #WR			Low
> >    #CS			Low
> >    #RESET		Low
> >    DC or RS		High
> >    RW			High
> >    Data	0..15		High
> > 
> > See also Adafruit learning course [1] for the example of the schematics.
> > 
> > While at it, drop unneeded NULL checks, since GPIO API is tolerant to that.
> > At the end, update TODO to mark this job eventually done.
> > 
> > [1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads
> 
> Shouldn't this be broken up into "one patch per thing" from your list
> above?  Feels like you did a lot of different things all in the same
> patch :(

I am aware, but breaking to the things here will bring it to the state where
the functionality is still broken in between. Another point is that the drop
of unneeded checks will bring the modification of the same line in the code
twice. Or if you look at 5), for instance, due to CS management breakage,
fixing it w/o 5) will bring it to the weird case that previously handled CS
due to lucky defaults from firmware or bootloader, suddenly won't work and
nothing can help it. The split in this case would look like adding the CS
handling to all drivers followed by removal all of them. I think it's ugly.
And so on. Believe me, I really tried hard to split this, but it always
becomes to undesired result.

Any ideas how to split that we fix stuff in one commit?
Andy Shevchenko April 16, 2021, 1:41 p.m. UTC | #3
On Fri, Apr 16, 2021 at 04:37:48PM +0300, Andy Shevchenko wrote:
> On Fri, Apr 16, 2021 at 02:51:59PM +0200, Greg Kroah-Hartman wrote:
> > On Fri, Apr 16, 2021 at 03:31:16PM +0300, Andy Shevchenko wrote:
> > > The infamous commit c440eee1a7a1 ("Staging: fbtft: Switch to
> > > the GPIO descriptor interface") broke GPIO handling completely.
> > > It has already four commits to rectify and it seems not enough.
> > > In order to fix the mess here we:
> > > 
> > >   1) Set default to "inactive" for all requested pins
> > > 
> > >   2) Fix CS, RD, and WR pins polarity since it's active low and
> > >      GPIO descriptor interface takes it into consideration from
> > >      the Device Tree or ACPI
> > > 
> > >   3) Fix RESET pin polarity in the places missed by the commit
> > >      b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")
> > > 
> > >   4) Consolidate chip activation (CS assert) under default
> > >      ->reset() callback
> > > 
> > > To summarize the expectations about polarity for GPIOs:
> > > 
> > >    #RD			Low
> > >    #WR			Low
> > >    #CS			Low
> > >    #RESET		Low
> > >    DC or RS		High
> > >    RW			High
> > >    Data	0..15		High
> > > 
> > > See also Adafruit learning course [1] for the example of the schematics.
> > > 
> > > While at it, drop unneeded NULL checks, since GPIO API is tolerant to that.
> > > At the end, update TODO to mark this job eventually done.
> > > 
> > > [1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads
> > 
> > Shouldn't this be broken up into "one patch per thing" from your list
> > above?  Feels like you did a lot of different things all in the same
> > patch :(
> 
> I am aware, but breaking to the things here will bring it to the state where
> the functionality is still broken in between. Another point is that the drop
> of unneeded checks will bring the modification of the same line in the code
> twice. Or if you look at 5), for instance, due to CS management breakage,
> fixing it w/o 5) will bring it to the weird case that previously handled CS
> due to lucky defaults from firmware or bootloader, suddenly won't work and
> nothing can help it. The split in this case would look like adding the CS
> handling to all drivers followed by removal all of them. I think it's ugly.
> And so on. Believe me, I really tried hard to split this, but it always
> becomes to undesired result.
> 
> Any ideas how to split that we fix stuff in one commit?

Okay, item 3) can be split to a separate patch.
Andy Shevchenko April 16, 2021, 2:20 p.m. UTC | #4
On Fri, Apr 16, 2021 at 02:51:59PM +0200, Greg Kroah-Hartman wrote:
> On Fri, Apr 16, 2021 at 03:31:16PM +0300, Andy Shevchenko wrote:
> > The infamous commit c440eee1a7a1 ("Staging: fbtft: Switch to
> > the GPIO descriptor interface") broke GPIO handling completely.
> > It has already four commits to rectify and it seems not enough.
> > In order to fix the mess here we:
> > 
> >   1) Set default to "inactive" for all requested pins
> > 
> >   2) Fix CS, RD, and WR pins polarity since it's active low and
> >      GPIO descriptor interface takes it into consideration from
> >      the Device Tree or ACPI
> > 
> >   3) Fix RESET pin polarity in the places missed by the commit
> >      b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor")
> > 
> >   4) Consolidate chip activation (CS assert) under default
> >      ->reset() callback
> > 
> > To summarize the expectations about polarity for GPIOs:
> > 
> >    #RD			Low
> >    #WR			Low
> >    #CS			Low
> >    #RESET		Low
> >    DC or RS		High
> >    RW			High
> >    Data	0..15		High
> > 
> > See also Adafruit learning course [1] for the example of the schematics.
> > 
> > While at it, drop unneeded NULL checks, since GPIO API is tolerant to that.
> > At the end, update TODO to mark this job eventually done.
> > 
> > [1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads
> 
> Shouldn't this be broken up into "one patch per thing" from your list
> above?  Feels like you did a lot of different things all in the same
> patch :(

Okay, I split a bit, now it's 4 patches. (See v2).
diff mbox series

Patch

diff --git a/drivers/staging/fbtft/TODO b/drivers/staging/fbtft/TODO
index a9f4802bb6be..e72a08bf221c 100644
--- a/drivers/staging/fbtft/TODO
+++ b/drivers/staging/fbtft/TODO
@@ -1,8 +1,3 @@ 
-* convert all uses of the old GPIO API from <linux/gpio.h> to the
-  GPIO descriptor API in <linux/gpio/consumer.h> and look up GPIO
-  lines from device tree, ACPI or board files, board files should
-  use <linux/gpio/machine.h>
-
 * convert all these over to drm_simple_display_pipe and submit for inclusion
   into the DRM subsystem under drivers/gpu/drm - fbdev doesn't take any new
   drivers anymore.
diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c
index eeeeec97ad27..b545c2ca80a4 100644
--- a/drivers/staging/fbtft/fb_agm1264k-fl.c
+++ b/drivers/staging/fbtft/fb_agm1264k-fl.c
@@ -84,9 +84,9 @@  static void reset(struct fbtft_par *par)
 
 	dev_dbg(par->info->device, "%s()\n", __func__);
 
-	gpiod_set_value(par->gpio.reset, 0);
-	udelay(20);
 	gpiod_set_value(par->gpio.reset, 1);
+	udelay(20);
+	gpiod_set_value(par->gpio.reset, 0);
 	mdelay(120);
 }
 
@@ -194,12 +194,12 @@  static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 	/* select chip */
 	if (*buf) {
 		/* cs1 */
-		gpiod_set_value(par->CS0, 1);
-		gpiod_set_value(par->CS1, 0);
-	} else {
-		/* cs0 */
 		gpiod_set_value(par->CS0, 0);
 		gpiod_set_value(par->CS1, 1);
+	} else {
+		/* cs0 */
+		gpiod_set_value(par->CS0, 1);
+		gpiod_set_value(par->CS1, 0);
 	}
 
 	gpiod_set_value(par->RS, 0); /* RS->0 (command mode) */
@@ -397,8 +397,8 @@  static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 	}
 	kfree(convert_buf);
 
-	gpiod_set_value(par->CS0, 1);
-	gpiod_set_value(par->CS1, 1);
+	gpiod_set_value(par->CS0, 0);
+	gpiod_set_value(par->CS1, 0);
 
 	return ret;
 }
@@ -419,10 +419,10 @@  static int write(struct fbtft_par *par, void *buf, size_t len)
 		for (i = 0; i < 8; ++i)
 			gpiod_set_value(par->gpio.db[i], data & (1 << i));
 		/* set E */
-		gpiod_set_value(par->EPIN, 1);
+		gpiod_set_value(par->EPIN, 0);
 		udelay(5);
 		/* unset E - write */
-		gpiod_set_value(par->EPIN, 0);
+		gpiod_set_value(par->EPIN, 1);
 		udelay(1);
 	}
 
diff --git a/drivers/staging/fbtft/fb_bd663474.c b/drivers/staging/fbtft/fb_bd663474.c
index e2c7646588f8..1629c2c440a9 100644
--- a/drivers/staging/fbtft/fb_bd663474.c
+++ b/drivers/staging/fbtft/fb_bd663474.c
@@ -12,7 +12,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -24,9 +23,6 @@ 
 
 static int init_display(struct fbtft_par *par)
 {
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	par->fbtftops.reset(par);
 
 	/* Initialization sequence from Lib_UTFT */
diff --git a/drivers/staging/fbtft/fb_ili9163.c b/drivers/staging/fbtft/fb_ili9163.c
index 05648c3ffe47..6582a2c90aaf 100644
--- a/drivers/staging/fbtft/fb_ili9163.c
+++ b/drivers/staging/fbtft/fb_ili9163.c
@@ -11,7 +11,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <video/mipi_display.h>
 
@@ -77,9 +76,6 @@  static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	write_reg(par, MIPI_DCS_SOFT_RESET); /* software reset */
 	mdelay(500);
 	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); /* exit sleep */
diff --git a/drivers/staging/fbtft/fb_ili9320.c b/drivers/staging/fbtft/fb_ili9320.c
index f2e72d14431d..a8f4c618b754 100644
--- a/drivers/staging/fbtft/fb_ili9320.c
+++ b/drivers/staging/fbtft/fb_ili9320.c
@@ -8,7 +8,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/spi/spi.h>
 #include <linux/delay.h>
 
diff --git a/drivers/staging/fbtft/fb_ili9325.c b/drivers/staging/fbtft/fb_ili9325.c
index c9aa4cb43123..16d3b17ca279 100644
--- a/drivers/staging/fbtft/fb_ili9325.c
+++ b/drivers/staging/fbtft/fb_ili9325.c
@@ -10,7 +10,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -85,9 +84,6 @@  static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	bt &= 0x07;
 	vc &= 0x07;
 	vrh &= 0x0f;
diff --git a/drivers/staging/fbtft/fb_ili9340.c b/drivers/staging/fbtft/fb_ili9340.c
index 415183c7054a..704236bcaf3f 100644
--- a/drivers/staging/fbtft/fb_ili9340.c
+++ b/drivers/staging/fbtft/fb_ili9340.c
@@ -8,7 +8,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <video/mipi_display.h>
 
diff --git a/drivers/staging/fbtft/fb_s6d1121.c b/drivers/staging/fbtft/fb_s6d1121.c
index 8c7de3290343..62f27172f844 100644
--- a/drivers/staging/fbtft/fb_s6d1121.c
+++ b/drivers/staging/fbtft/fb_s6d1121.c
@@ -12,7 +12,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -29,9 +28,6 @@  static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	/* Initialization sequence from Lib_UTFT */
 
 	write_reg(par, 0x0011, 0x2004);
diff --git a/drivers/staging/fbtft/fb_sh1106.c b/drivers/staging/fbtft/fb_sh1106.c
index 6f7249493ea3..7b9ab39e1c1a 100644
--- a/drivers/staging/fbtft/fb_sh1106.c
+++ b/drivers/staging/fbtft/fb_sh1106.c
@@ -9,7 +9,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
diff --git a/drivers/staging/fbtft/fb_ssd1289.c b/drivers/staging/fbtft/fb_ssd1289.c
index 7a3fe022cc69..f27bab38b3ec 100644
--- a/drivers/staging/fbtft/fb_ssd1289.c
+++ b/drivers/staging/fbtft/fb_ssd1289.c
@@ -10,7 +10,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 
 #include "fbtft.h"
 
@@ -28,9 +27,6 @@  static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	write_reg(par, 0x00, 0x0001);
 	write_reg(par, 0x03, 0xA8A4);
 	write_reg(par, 0x0C, 0x0000);
diff --git a/drivers/staging/fbtft/fb_ssd1325.c b/drivers/staging/fbtft/fb_ssd1325.c
index 8a3140d41d8b..796a2ac3e194 100644
--- a/drivers/staging/fbtft/fb_ssd1325.c
+++ b/drivers/staging/fbtft/fb_ssd1325.c
@@ -35,8 +35,6 @@  static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	gpiod_set_value(par->gpio.cs, 0);
-
 	write_reg(par, 0xb3);
 	write_reg(par, 0xf0);
 	write_reg(par, 0xae);
diff --git a/drivers/staging/fbtft/fb_ssd1331.c b/drivers/staging/fbtft/fb_ssd1331.c
index 37622c9462aa..ec5eced7f8cb 100644
--- a/drivers/staging/fbtft/fb_ssd1331.c
+++ b/drivers/staging/fbtft/fb_ssd1331.c
@@ -81,8 +81,7 @@  static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 	va_start(args, len);
 
 	*buf = (u8)va_arg(args, unsigned int);
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, 0);
+	gpiod_set_value(par->gpio.dc, 0);
 	ret = par->fbtftops.write(par, par->buf, sizeof(u8));
 	if (ret < 0) {
 		va_end(args);
@@ -104,8 +103,7 @@  static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 			return;
 		}
 	}
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, 1);
+	gpiod_set_value(par->gpio.dc, 1);
 	va_end(args);
 }
 
diff --git a/drivers/staging/fbtft/fb_ssd1351.c b/drivers/staging/fbtft/fb_ssd1351.c
index 900b28d826b2..cf263a58a148 100644
--- a/drivers/staging/fbtft/fb_ssd1351.c
+++ b/drivers/staging/fbtft/fb_ssd1351.c
@@ -2,7 +2,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/spi/spi.h>
 #include <linux/delay.h>
 
diff --git a/drivers/staging/fbtft/fb_upd161704.c b/drivers/staging/fbtft/fb_upd161704.c
index c77832ae5e5b..c680160d6380 100644
--- a/drivers/staging/fbtft/fb_upd161704.c
+++ b/drivers/staging/fbtft/fb_upd161704.c
@@ -12,7 +12,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
@@ -26,9 +25,6 @@  static int init_display(struct fbtft_par *par)
 {
 	par->fbtftops.reset(par);
 
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
-
 	/* Initialization sequence from Lib_UTFT */
 
 	/* register reset */
diff --git a/drivers/staging/fbtft/fb_watterott.c b/drivers/staging/fbtft/fb_watterott.c
index 76b25df376b8..a57e1f4feef3 100644
--- a/drivers/staging/fbtft/fb_watterott.c
+++ b/drivers/staging/fbtft/fb_watterott.c
@@ -8,7 +8,6 @@ 
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "fbtft.h"
diff --git a/drivers/staging/fbtft/fbtft-bus.c b/drivers/staging/fbtft/fbtft-bus.c
index 63c65dd67b17..3d422bc11641 100644
--- a/drivers/staging/fbtft/fbtft-bus.c
+++ b/drivers/staging/fbtft/fbtft-bus.c
@@ -135,8 +135,7 @@  int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
 	remain = len / 2;
 	vmem16 = (u16 *)(par->info->screen_buffer + offset);
 
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, 1);
+	gpiod_set_value(par->gpio.dc, 1);
 
 	/* non buffered write */
 	if (!par->txbuf.buf)
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 4f362dad4436..67c3b1975a4d 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -38,8 +38,7 @@  int fbtft_write_buf_dc(struct fbtft_par *par, void *buf, size_t len, int dc)
 {
 	int ret;
 
-	if (par->gpio.dc)
-		gpiod_set_value(par->gpio.dc, dc);
+	gpiod_set_value(par->gpio.dc, dc);
 
 	ret = par->fbtftops.write(par, buf, len);
 	if (ret < 0)
@@ -79,7 +78,7 @@  static int fbtft_request_one_gpio(struct fbtft_par *par,
 	int ret = 0;
 
 	*gpiop = devm_gpiod_get_index_optional(dev, name, index,
-					       GPIOD_OUT_HIGH);
+					       GPIOD_OUT_LOW);
 	if (IS_ERR(*gpiop)) {
 		ret = PTR_ERR(*gpiop);
 		dev_err(dev,
@@ -226,11 +225,15 @@  static void fbtft_reset(struct fbtft_par *par)
 {
 	if (!par->gpio.reset)
 		return;
+
 	fbtft_par_dbg(DEBUG_RESET, par, "%s()\n", __func__);
+
 	gpiod_set_value_cansleep(par->gpio.reset, 1);
 	usleep_range(20, 40);
 	gpiod_set_value_cansleep(par->gpio.reset, 0);
 	msleep(120);
+
+	gpiod_set_value_cansleep(par->gpio.cs, 1);  /* Activate chip */
 }
 
 static void fbtft_update_display(struct fbtft_par *par, unsigned int start_line,
@@ -922,8 +925,6 @@  static int fbtft_init_display_from_property(struct fbtft_par *par)
 		goto out_free;
 
 	par->fbtftops.reset(par);
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
 
 	index = -1;
 	val = values[++index];
@@ -1018,8 +1019,6 @@  int fbtft_init_display(struct fbtft_par *par)
 	}
 
 	par->fbtftops.reset(par);
-	if (par->gpio.cs)
-		gpiod_set_value(par->gpio.cs, 0);  /* Activate chip */
 
 	i = 0;
 	while (i < FBTFT_MAX_INIT_SEQUENCE) {
diff --git a/drivers/staging/fbtft/fbtft-io.c b/drivers/staging/fbtft/fbtft-io.c
index 0863d257d762..de1904a443c2 100644
--- a/drivers/staging/fbtft/fbtft-io.c
+++ b/drivers/staging/fbtft/fbtft-io.c
@@ -142,12 +142,12 @@  int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
 		data = *(u8 *)buf;
 
 		/* Start writing by pulling down /WR */
-		gpiod_set_value(par->gpio.wr, 0);
+		gpiod_set_value(par->gpio.wr, 1);
 
 		/* Set data */
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		if (data == prev_data) {
-			gpiod_set_value(par->gpio.wr, 0); /* used as delay */
+			gpiod_set_value(par->gpio.wr, 1); /* used as delay */
 		} else {
 			for (i = 0; i < 8; i++) {
 				if ((data & 1) != (prev_data & 1))
@@ -165,7 +165,7 @@  int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
 #endif
 
 		/* Pullup /WR */
-		gpiod_set_value(par->gpio.wr, 1);
+		gpiod_set_value(par->gpio.wr, 0);
 
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		prev_data = *(u8 *)buf;
@@ -192,12 +192,12 @@  int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
 		data = *(u16 *)buf;
 
 		/* Start writing by pulling down /WR */
-		gpiod_set_value(par->gpio.wr, 0);
+		gpiod_set_value(par->gpio.wr, 1);
 
 		/* Set data */
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		if (data == prev_data) {
-			gpiod_set_value(par->gpio.wr, 0); /* used as delay */
+			gpiod_set_value(par->gpio.wr, 1); /* used as delay */
 		} else {
 			for (i = 0; i < 16; i++) {
 				if ((data & 1) != (prev_data & 1))
@@ -215,7 +215,7 @@  int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
 #endif
 
 		/* Pullup /WR */
-		gpiod_set_value(par->gpio.wr, 1);
+		gpiod_set_value(par->gpio.wr, 0);
 
 #ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
 		prev_data = *(u16 *)buf;