| Message ID | 20210414111007.v1.1.I1a438604a79025307f177347d45815987b105cb5@changeid (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [v1] arm64: dts: qcom: sc7180: coachz: Add thermal config for skin temperature | expand |
Hi, On Wed, Apr 14, 2021 at 11:10 AM Matthias Kaehlcke <mka@chromium.org> wrote: > > Add ADC and thermal monitor configuration for skin temperature, > plus a thermal zone that monitors the skin temperature and uses > the big cores as cooling devices. > > CoachZ rev1 is stuffed with an incompatible thermistor for the > skin temperature, disable the thermal zone for rev1 to avoid > the use of bogus temperature values. > > Signed-off-by: Matthias Kaehlcke <mka@chromium.org> > --- > > .../dts/qcom/sc7180-trogdor-coachz-r1.dts | 9 +++ > .../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 63 +++++++++++++++++++ > 2 files changed, 72 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts > index 86619f6c1134..80bdc4d5b523 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts > @@ -14,6 +14,15 @@ / { > compatible = "google,coachz-rev1", "qcom,sc7180"; > }; > > +/* > + * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature, > + * which currently is not supported by the PM6150 ADC driver. Disable the > + * skin temperature thermal zone to avoid using bogus temperature values. > + */ > +&skin_temp_thermal { > + status = "disabled"; > +}; > + > &tlmm { > gpio-line-names = "HUB_RST_L", > "AP_RAM_ID0", > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi > index e2ffe71c2d52..cabe5d6b981b 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi > @@ -25,6 +25,50 @@ adau7002: audio-codec-1 { > IOVDD-supply = <&pp1800_l15a>; > #sound-dai-cells = <0>; > }; > + > + thermal-zones { > + skin_temp_thermal: skin-temp-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&pm6150_adc_tm 1>; > + sustainable-power = <814>; > + > + trips { > + skin_temp_alert0: trip-point0 { > + temperature = <42000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + > + skin_temp_alert1: trip-point1 { > + temperature = <45000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + > + skin-temp-crit { If it were me I would have added a label to the "crit" too to match the alert0 and alert1. It's not needed right now, though, so it's not worth spinning the patch for. > + temperature = <60000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&skin_temp_alert0>; > + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + > + map1 { > + trip = <&skin_temp_alert1>; > + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + }; > }; > > &ap_spi_fp { > @@ -77,6 +121,25 @@ &panel { > compatible = "boe,nv110wtm-n61"; > }; > > +&pm6150_adc { > + skin-temp-thermistor@4e { A part of me wonders if we should just be using the generic name "thermistor@4e" which seems more common in dts. ...but what you have matches what we've already done in pompom so I think it's fine. FWIW: I'm not an expert on any of the thermistor stuff but it looks sane and matches how pompom is working with this thermistor... Reviewed-by: Douglas Anderson <dianders@chromium.org>
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts index 86619f6c1134..80bdc4d5b523 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -14,6 +14,15 @@ / { compatible = "google,coachz-rev1", "qcom,sc7180"; }; +/* + * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature, + * which currently is not supported by the PM6150 ADC driver. Disable the + * skin temperature thermal zone to avoid using bogus temperature values. + */ +&skin_temp_thermal { + status = "disabled"; +}; + &tlmm { gpio-line-names = "HUB_RST_L", "AP_RAM_ID0", diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index e2ffe71c2d52..cabe5d6b981b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -25,6 +25,50 @@ adau7002: audio-codec-1 { IOVDD-supply = <&pp1800_l15a>; #sound-dai-cells = <0>; }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <814>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <42000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <45000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <60000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; &ap_spi_fp { @@ -77,6 +121,25 @@ &panel { compatible = "boe,nv110wtm-n61"; }; +&pm6150_adc { + skin-temp-thermistor@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pp3300_dx_edp { gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; };
Add ADC and thermal monitor configuration for skin temperature, plus a thermal zone that monitors the skin temperature and uses the big cores as cooling devices. CoachZ rev1 is stuffed with an incompatible thermistor for the skin temperature, disable the thermal zone for rev1 to avoid the use of bogus temperature values. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> --- .../dts/qcom/sc7180-trogdor-coachz-r1.dts | 9 +++ .../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 63 +++++++++++++++++++ 2 files changed, 72 insertions(+)