diff mbox series

[06/12] arm64: dts: qcom: sc7180: Use QMP binding to control load state

Message ID 1618574638-5117-7-git-send-email-sibis@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Use qmp_send to update co-processor load state | expand

Commit Message

Sibi Sankar April 16, 2021, 12:03 p.m. UTC
Use the Qualcomm Mailbox Protocol (QMP) binding to control the load
state resources on SC7180 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

Comments

Stephen Boyd April 18, 2021, 2:02 a.m. UTC | #1
Quoting Sibi Sankar (2021-04-16 05:03:52)
> Use the Qualcomm Mailbox Protocol (QMP) binding to control the load
> state resources on SC7180 SoCs and drop deprecated power-domains exposed
> by AOSS QMP node.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a6da78d31fdd..6b55d74e2534 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -15,7 +15,6 @@ 
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -1998,14 +1997,15 @@ 
 			clock-names = "iface", "bus", "nav", "snoc_axi",
 				      "mnoc_axi", "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd SC7180_CX>,
+			power-domains = <&rpmhpd SC7180_CX>,
 					<&rpmhpd SC7180_MX>,
 					<&rpmhpd SC7180_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
+			power-domain-names = "cx", "mx", "mss";
 
 			memory-region = <&mpss_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -3220,7 +3220,6 @@ 
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {