diff mbox series

[1/1] video: hyperv_fb: Add ratelimit on error message

Message ID 1618933459-10585-1-git-send-email-mikelley@microsoft.com (mailing list archive)
State New, archived
Headers show
Series [1/1] video: hyperv_fb: Add ratelimit on error message | expand

Commit Message

Michael Kelley (LINUX) April 20, 2021, 3:44 p.m. UTC
Due to a full ring buffer, the driver may be unable to send updates to
the Hyper-V host.  But outputing the error message can make the problem
worse because console output is also typically written to the frame
buffer.  As a result, in some circumstances the error message is output
continuously.

Break the cycle by rate limiting the error message.  Also output
the error code for additional diagnosability.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
---
 drivers/video/fbdev/hyperv_fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Wei Liu April 20, 2021, 7:48 p.m. UTC | #1
On Tue, Apr 20, 2021 at 08:44:19AM -0700, Michael Kelley wrote:
> Due to a full ring buffer, the driver may be unable to send updates to
> the Hyper-V host.  But outputing the error message can make the problem
> worse because console output is also typically written to the frame
> buffer.  As a result, in some circumstances the error message is output
> continuously.
> 
> Break the cycle by rate limiting the error message.  Also output
> the error code for additional diagnosability.
> 
> Signed-off-by: Michael Kelley <mikelley@microsoft.com>

Applied to hyperv-next. Thanks.

> ---
>  drivers/video/fbdev/hyperv_fb.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
> index 4dc9077..a7e6eea 100644
> --- a/drivers/video/fbdev/hyperv_fb.c
> +++ b/drivers/video/fbdev/hyperv_fb.c
> @@ -308,7 +308,7 @@ static inline int synthvid_send(struct hv_device *hdev,
>  			       VM_PKT_DATA_INBAND, 0);
>  
>  	if (ret)
> -		pr_err("Unable to send packet via vmbus\n");
> +		pr_err_ratelimited("Unable to send packet via vmbus; error %d\n", ret);
>  
>  	return ret;
>  }
> -- 
> 1.8.3.1
>
Joe Perches April 20, 2021, 7:58 p.m. UTC | #2
On Tue, 2021-04-20 at 08:44 -0700, Michael Kelley wrote:
> Due to a full ring buffer, the driver may be unable to send updates to
> the Hyper-V host.  But outputing the error message can make the problem
> worse because console output is also typically written to the frame
> buffer.  As a result, in some circumstances the error message is output
> continuously.
> 
> Break the cycle by rate limiting the error message.  Also output
> the error code for additional diagnosability.
> 
> Signed-off-by: Michael Kelley <mikelley@microsoft.com>

None of the callers of this function ever check the return status.
Why is important/useful to emit this message at all?

> ---
>  drivers/video/fbdev/hyperv_fb.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
> index 4dc9077..a7e6eea 100644
> --- a/drivers/video/fbdev/hyperv_fb.c
> +++ b/drivers/video/fbdev/hyperv_fb.c
> @@ -308,7 +308,7 @@ static inline int synthvid_send(struct hv_device *hdev,
>  			       VM_PKT_DATA_INBAND, 0);
>  
> 
>  	if (ret)
> -		pr_err("Unable to send packet via vmbus\n");
> +		pr_err_ratelimited("Unable to send packet via vmbus; error %d\n", ret);
>  
> 
>  	return ret;
>  }
Michael Kelley (LINUX) April 21, 2021, 3:27 p.m. UTC | #3
From: Joe Perches <joe@perches.com> Sent: Tuesday, April 20, 2021 12:59 PM
> 
> On Tue, 2021-04-20 at 08:44 -0700, Michael Kelley wrote:
> > Due to a full ring buffer, the driver may be unable to send updates to
> > the Hyper-V host.  But outputing the error message can make the problem
> > worse because console output is also typically written to the frame
> > buffer.  As a result, in some circumstances the error message is output
> > continuously.
> >
> > Break the cycle by rate limiting the error message.  Also output
> > the error code for additional diagnosability.
> >
> > Signed-off-by: Michael Kelley <mikelley@microsoft.com>
> 
> None of the callers of this function ever check the return status.
> Why is important/useful to emit this message at all?
>

Except during device initialization, the messages tell Hyper-V
about updates to the frame buffer contents.  The fbdev
framework functions (such as fillrect) that eventually call synthvid_send()
are void functions.   So the message is the only alert that something
has gone wrong in the communication with Hyper-V, which makes
it useful for diagnostic purposes.

Michael

 
> > ---
> >  drivers/video/fbdev/hyperv_fb.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
> > index 4dc9077..a7e6eea 100644
> > --- a/drivers/video/fbdev/hyperv_fb.c
> > +++ b/drivers/video/fbdev/hyperv_fb.c
> > @@ -308,7 +308,7 @@ static inline int synthvid_send(struct hv_device *hdev,
> >  			       VM_PKT_DATA_INBAND, 0);
> >
> >
> >  	if (ret)
> > -		pr_err("Unable to send packet via vmbus\n");
> > +		pr_err_ratelimited("Unable to send packet via vmbus; error %d\n", ret);
> >
> >
> >  	return ret;
> >  }
>
diff mbox series

Patch

diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index 4dc9077..a7e6eea 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -308,7 +308,7 @@  static inline int synthvid_send(struct hv_device *hdev,
 			       VM_PKT_DATA_INBAND, 0);
 
 	if (ret)
-		pr_err("Unable to send packet via vmbus\n");
+		pr_err_ratelimited("Unable to send packet via vmbus; error %d\n", ret);
 
 	return ret;
 }