mbox series

[v3,net-next,0/5] net: dsa: Allow default tag protocol to be overridden from DT

Message ID 20210420185311.899183-1-tobias@waldekranz.com (mailing list archive)
Headers show
Series net: dsa: Allow default tag protocol to be overridden from DT | expand

Message

Tobias Waldekranz April 20, 2021, 6:53 p.m. UTC
This is a continuation of the work started in this patch:
https://lore.kernel.org/netdev/20210323102326.3677940-1-tobias@waldekranz.com/

In addition to the mv88e6xxx support to dynamically change the
protocol, it is now possible to override the protocol from the device
tree. This means that when a board vendor finds an incompatibility,
they can specify a working protocol in the DT, and users will not have
to worry about it.

Some background information:

In a system using an NXP T1023 SoC connected to a 6390X switch, we
noticed that TO_CPU frames where not reaching the CPU. This only
happened on hardware port 8. Looking at the DSA master interface
(dpaa-ethernet) we could see that an Rx error counter was bumped at
the same rate. The logs indicated a parser error.

It just so happens that a TO_CPU coming in on device 0, port 8, will
result in the first two bytes of the DSA tag being one of:

00 40
00 44
00 46

My guess was that since these values looked like 802.3 length fields,
the controller's parser would signal an error if the frame length did
not match what was in the header.

This was later confirmed using two different workarounds provided by
Vladimir. Unfortunately these either bypass or ignore the hardware
parser and thus robs working combinations of the ability to do RSS and
other nifty things. It was therefore decided to go with the option of
a DT override.

v1 -> v2:
  - Fail if the device does not support changing protocols instead of
    falling back to the default. (Andrew)
  - Only call change_tag_protocol on CPU ports. (Andrew/Vladimir)
  - Only allow changing the protocol on chips that have at least
    "undocumented" level of support for EDSA. (Andrew).
  - List the supported protocols in the binding documentation. I opted
    for only listing the protocols that I have tested. As more people
    test their drivers, they can add them. (Rob)

v2 -> v3:
  - Rename "dsa,tag-protocol" -> "dsa-tag-protocol". (Rob)
  - Some cleanups to 4/5. (Vladimir)
  - Add a comment detailing how tree/driver agreement on the tag
    protocol is enforced. (Vladimir).

Tobias Waldekranz (5):
  net: dsa: mv88e6xxx: Mark chips with undocumented EDSA tag support
  net: dsa: mv88e6xxx: Allow dynamic reconfiguration of tag protocol
  net: dsa: Only notify CPU ports of changes to the tag protocol
  net: dsa: Allow default tag protocol to be overridden from DT
  dt-bindings: net: dsa: Document dsa-tag-protocol property

 .../devicetree/bindings/net/dsa/dsa.yaml      |   9 ++
 drivers/net/dsa/mv88e6xxx/chip.c              |  99 +++++++++++------
 drivers/net/dsa/mv88e6xxx/chip.h              |  21 +++-
 include/net/dsa.h                             |   5 +
 net/dsa/dsa2.c                                | 103 +++++++++++++++---
 net/dsa/switch.c                              |  25 ++---
 6 files changed, 192 insertions(+), 70 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org April 21, 2021, midnight UTC | #1
Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Tue, 20 Apr 2021 20:53:06 +0200 you wrote:
> This is a continuation of the work started in this patch:
> https://lore.kernel.org/netdev/20210323102326.3677940-1-tobias@waldekranz.com/
> 
> In addition to the mv88e6xxx support to dynamically change the
> protocol, it is now possible to override the protocol from the device
> tree. This means that when a board vendor finds an incompatibility,
> they can specify a working protocol in the DT, and users will not have
> to worry about it.
> 
> [...]

Here is the summary with links:
  - [v3,net-next,1/5] net: dsa: mv88e6xxx: Mark chips with undocumented EDSA tag support
    https://git.kernel.org/netdev/net-next/c/670bb80f8196
  - [v3,net-next,2/5] net: dsa: mv88e6xxx: Allow dynamic reconfiguration of tag protocol
    https://git.kernel.org/netdev/net-next/c/9a99bef5f87f
  - [v3,net-next,3/5] net: dsa: Only notify CPU ports of changes to the tag protocol
    https://git.kernel.org/netdev/net-next/c/21e0b508c8d1
  - [v3,net-next,4/5] net: dsa: Allow default tag protocol to be overridden from DT
    https://git.kernel.org/netdev/net-next/c/deff710703d8
  - [v3,net-next,5/5] dt-bindings: net: dsa: Document dsa-tag-protocol property
    https://git.kernel.org/netdev/net-next/c/eb78cacebaf2

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html