diff mbox series

[05/14] drivers: net: dsa: qca8k: add support for qca8327 switch

Message ID 20210423014741.11858-6-ansuelsmth@gmail.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series Multiple improvement to qca8k stability | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Christian Marangi April 23, 2021, 1:47 a.m. UTC 
qca8327 switch is a low tier version of the more recent qca8337.
It does share the same regs used by the qca8k driver and can be
supported with minimal change.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 21 ++++++++++++++++++---
 drivers/net/dsa/qca8k.h |  6 ++++++
 2 files changed, 24 insertions(+), 3 deletions(-)

Comments

Andrew Lunn April 23, 2021, 12:42 p.m. UTC | #1 
> @@ -1467,11 +1468,16 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
>  		gpiod_set_value_cansleep(priv->reset_gpio, 0);
>  	}
>  
> +	/* get the switches ID from the compatible */
> +	data = of_device_get_match_data(&mdiodev->dev);
> +	if (!data)
> +		return -ENODEV;
> +
>  	/* read the switches ID register */
>  	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
>  	id >>= QCA8K_MASK_CTRL_ID_S;
>  	id &= QCA8K_MASK_CTRL_ID_M;
> -	if (id != QCA8K_ID_QCA8337)
> +	if (id != data->id)
>  		return -ENODEV;

It is useful to print an error message here: Found X, expected
Y. Gives the DT writer an idea what they did wrong.

   Andrew
diff mbox series

Patch

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 7408cbee05c2..ca12394c2ff7 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1440,6 +1440,7 @@  static const struct dsa_switch_ops qca8k_switch_ops = {
 static int
 qca8k_sw_probe(struct mdio_device *mdiodev)
 {
+	const struct qca8k_match_data *data;
 	struct qca8k_priv *priv;
 	u32 id;
 
@@ -1467,11 +1468,16 @@  qca8k_sw_probe(struct mdio_device *mdiodev)
 		gpiod_set_value_cansleep(priv->reset_gpio, 0);
 	}
 
+	/* get the switches ID from the compatible */
+	data = of_device_get_match_data(&mdiodev->dev);
+	if (!data)
+		return -ENODEV;
+
 	/* read the switches ID register */
 	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);
 	id >>= QCA8K_MASK_CTRL_ID_S;
 	id &= QCA8K_MASK_CTRL_ID_M;
-	if (id != QCA8K_ID_QCA8337)
+	if (id != data->id)
 		return -ENODEV;
 
 	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
@@ -1537,9 +1543,18 @@  static int qca8k_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
 			 qca8k_suspend, qca8k_resume);
 
+static const struct qca8k_match_data qca832x = {
+	.id = QCA8K_ID_QCA8327,
+};
+
+static const struct qca8k_match_data qca833x = {
+	.id = QCA8K_ID_QCA8337,
+};
+
 static const struct of_device_id qca8k_of_match[] = {
-	{ .compatible = "qca,qca8334" },
-	{ .compatible = "qca,qca8337" },
+	{ .compatible = "qca,qca8327", .data = &qca832x },
+	{ .compatible = "qca,qca8334", .data = &qca833x },
+	{ .compatible = "qca,qca8337", .data = &qca833x },
 	{ /* sentinel */ },
 };
 
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 0ff7abbd40dc..d94129371a1c 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -15,6 +15,8 @@ 
 #define QCA8K_NUM_PORTS					7
 #define QCA8K_MAX_MTU					9000
 
+#define PHY_ID_QCA8327					0x004dd034
+#define QCA8K_ID_QCA8327				0x12
 #define PHY_ID_QCA8337					0x004dd036
 #define QCA8K_ID_QCA8337				0x13
 
@@ -234,6 +236,10 @@  struct ar8xxx_port_status {
 	int enabled;
 };
 
+struct qca8k_match_data {
+	u8 id;
+};
+
 struct qca8k_priv {
 	struct regmap *regmap;
 	struct mii_bus *bus;