| Message ID | 20210416153909.v4.14.Ide8ba40feb2e43bc98a11edbb08d696d62dcd83e@changeid (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | drm: Fix EDID reading on ti-sn65dsi86; solve some chicken-and-egg problems | expand |
On Fri 16 Apr 17:39 CDT 2021, Douglas Anderson wrote: > This is just code motion of the probe routine to move all the things > that are for the "whole chip" (instead of the GPIO parts or the > MIPI-to-eDP parts) together at the start of probe. This is in > preparation for breaking the driver into sub-drivers. > > Since we're using devm for all of the "whole chip" stuff this is > actually quite easy now. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > > (no changes since v1) > > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 26 +++++++++++++------------- > 1 file changed, 13 insertions(+), 13 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c > index 53f1f7b3022f..57bc489a0412 100644 > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c > @@ -1253,12 +1253,6 @@ static int ti_sn65dsi86_probe(struct i2c_client *client, > return PTR_ERR(pdata->regmap); > } > > - ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &pdata->panel, NULL); > - if (ret) { > - DRM_ERROR("could not find any panel node\n"); > - return ret; > - } > - > pdata->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); > if (IS_ERR(pdata->enable_gpio)) { > DRM_ERROR("failed to get enable gpio from DT\n"); > @@ -1266,8 +1260,6 @@ static int ti_sn65dsi86_probe(struct i2c_client *client, > return ret; > } > > - ti_sn_bridge_parse_lanes(pdata, dev->of_node); > - > ret = ti_sn65dsi86_parse_regulators(pdata); > if (ret) { > DRM_ERROR("failed to parse regulators\n"); > @@ -1278,12 +1270,22 @@ static int ti_sn65dsi86_probe(struct i2c_client *client, > if (IS_ERR(pdata->refclk)) > return PTR_ERR(pdata->refclk); > > - ret = ti_sn_bridge_parse_dsi_host(pdata); > + pm_runtime_enable(dev); > + ret = devm_add_action_or_reset(dev, ti_sn65dsi86_runtime_disable, dev); > if (ret) > return ret; > > - pm_runtime_enable(dev); > - ret = devm_add_action_or_reset(dev, ti_sn65dsi86_runtime_disable, dev); > + ti_sn65dsi86_debugfs_init(pdata); > + > + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &pdata->panel, NULL); > + if (ret) { > + DRM_ERROR("could not find any panel node\n"); > + return ret; > + } > + > + ti_sn_bridge_parse_lanes(pdata, dev->of_node); > + > + ret = ti_sn_bridge_parse_dsi_host(pdata); > if (ret) > return ret; > > @@ -1301,8 +1303,6 @@ static int ti_sn65dsi86_probe(struct i2c_client *client, > > drm_bridge_add(&pdata->bridge); > > - ti_sn65dsi86_debugfs_init(pdata); > - > return 0; > } > > -- > 2.31.1.368.gbe11c130af-goog >
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 53f1f7b3022f..57bc489a0412 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -1253,12 +1253,6 @@ static int ti_sn65dsi86_probe(struct i2c_client *client, return PTR_ERR(pdata->regmap); } - ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &pdata->panel, NULL); - if (ret) { - DRM_ERROR("could not find any panel node\n"); - return ret; - } - pdata->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); if (IS_ERR(pdata->enable_gpio)) { DRM_ERROR("failed to get enable gpio from DT\n"); @@ -1266,8 +1260,6 @@ static int ti_sn65dsi86_probe(struct i2c_client *client, return ret; } - ti_sn_bridge_parse_lanes(pdata, dev->of_node); - ret = ti_sn65dsi86_parse_regulators(pdata); if (ret) { DRM_ERROR("failed to parse regulators\n"); @@ -1278,12 +1270,22 @@ static int ti_sn65dsi86_probe(struct i2c_client *client, if (IS_ERR(pdata->refclk)) return PTR_ERR(pdata->refclk); - ret = ti_sn_bridge_parse_dsi_host(pdata); + pm_runtime_enable(dev); + ret = devm_add_action_or_reset(dev, ti_sn65dsi86_runtime_disable, dev); if (ret) return ret; - pm_runtime_enable(dev); - ret = devm_add_action_or_reset(dev, ti_sn65dsi86_runtime_disable, dev); + ti_sn65dsi86_debugfs_init(pdata); + + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &pdata->panel, NULL); + if (ret) { + DRM_ERROR("could not find any panel node\n"); + return ret; + } + + ti_sn_bridge_parse_lanes(pdata, dev->of_node); + + ret = ti_sn_bridge_parse_dsi_host(pdata); if (ret) return ret; @@ -1301,8 +1303,6 @@ static int ti_sn65dsi86_probe(struct i2c_client *client, drm_bridge_add(&pdata->bridge); - ti_sn65dsi86_debugfs_init(pdata); - return 0; }
This is just code motion of the probe routine to move all the things that are for the "whole chip" (instead of the GPIO parts or the MIPI-to-eDP parts) together at the start of probe. This is in preparation for breaking the driver into sub-drivers. Since we're using devm for all of the "whole chip" stuff this is actually quite easy now. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- (no changes since v1) drivers/gpu/drm/bridge/ti-sn65dsi86.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)