diff mbox series

ASoC: meson: g12a-toacodec: add support for SM1 TOACODEC

Message ID 20210429170147.3615883-1-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show
Series ASoC: meson: g12a-toacodec: add support for SM1 TOACODEC | expand

Commit Message

Neil Armstrong April 29, 2021, 5:01 p.m. UTC
This adds support for the TOACODEC found in Amlogic SM1 SoCs.

The bits are shifted for more selection of clock sources, so this only
maps the same support for G12A to the SM1 bits.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 sound/soc/meson/g12a-toacodec.c | 126 +++++++++++++++++++++++++++++++-
 1 file changed, 124 insertions(+), 2 deletions(-)

Comments

Jerome Brunet April 29, 2021, 5:43 p.m. UTC | #1
On Thu 29 Apr 2021 at 19:01, Neil Armstrong <narmstrong@baylibre.com> wrote:


>  
> +static int sm1_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
> +				     struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component =
> +		snd_soc_dapm_kcontrol_component(kcontrol);
> +	struct snd_soc_dapm_context *dapm =
> +		snd_soc_dapm_kcontrol_dapm(kcontrol);
> +	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
> +	unsigned int mux, changed;
> +
> +	mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
> +	changed = snd_soc_component_test_bits(component, e->reg,
> +					      CTRL0_DAT_SEL_SM1,
> +					      FIELD_PREP(CTRL0_DAT_SEL_SM1, mux));
> +
> +	if (!changed)
> +		return 0;
> +
> +	/* Force disconnect of the mux while updating */
> +	snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
> +
> +	snd_soc_component_update_bits(component, e->reg,
> +				      CTRL0_DAT_SEL_SM1 |
> +				      CTRL0_LRCLK_SEL_SM1 |
> +				      CTRL0_BCLK_SEL_SM1,
> +				      FIELD_PREP(CTRL0_DAT_SEL_SM1, mux) |
> +				      FIELD_PREP(CTRL0_LRCLK_SEL_SM1, mux) |
> +				      FIELD_PREP(CTRL0_BCLK_SEL_SM1, mux));
> +
> +	/*
> +	 * FIXME:
> +	 * On this soc, the glue gets the MCLK directly from the clock
> +	 * controller instead of going the through the TDM interface.
> +	 *
> +	 * Here we assume interface A uses clock A, etc ... While it is
> +	 * true for now, it could be different. Instead the glue should
> +	 * find out the clock used by the interface and select the same
> +	 * source. For that, we will need regmap backed clock mux which
> +	 * is a work in progress
> +	 */
> +	snd_soc_component_update_bits(component, e->reg,
> +				      CTRL0_MCLK_SEL,
> +				      FIELD_PREP(CTRL0_MCLK_SEL, mux));
> +
> +	snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
> +
> +	return 0;
> +}

Instead of duplicating this function, I'd prefer if you could use regmap fields
Neil Armstrong April 30, 2021, 8:31 a.m. UTC | #2
On 29/04/2021 19:43, Jerome Brunet wrote:
> 
> On Thu 29 Apr 2021 at 19:01, Neil Armstrong <narmstrong@baylibre.com> wrote:
> 
> 
>>  
>> +static int sm1_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
>> +				     struct snd_ctl_elem_value *ucontrol)
>> +{
>> +	struct snd_soc_component *component =
>> +		snd_soc_dapm_kcontrol_component(kcontrol);
>> +	struct snd_soc_dapm_context *dapm =
>> +		snd_soc_dapm_kcontrol_dapm(kcontrol);
>> +	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
>> +	unsigned int mux, changed;
>> +
>> +	mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
>> +	changed = snd_soc_component_test_bits(component, e->reg,
>> +					      CTRL0_DAT_SEL_SM1,
>> +					      FIELD_PREP(CTRL0_DAT_SEL_SM1, mux));
>> +
>> +	if (!changed)
>> +		return 0;
>> +
>> +	/* Force disconnect of the mux while updating */
>> +	snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
>> +
>> +	snd_soc_component_update_bits(component, e->reg,
>> +				      CTRL0_DAT_SEL_SM1 |
>> +				      CTRL0_LRCLK_SEL_SM1 |
>> +				      CTRL0_BCLK_SEL_SM1,
>> +				      FIELD_PREP(CTRL0_DAT_SEL_SM1, mux) |
>> +				      FIELD_PREP(CTRL0_LRCLK_SEL_SM1, mux) |
>> +				      FIELD_PREP(CTRL0_BCLK_SEL_SM1, mux));
>> +
>> +	/*
>> +	 * FIXME:
>> +	 * On this soc, the glue gets the MCLK directly from the clock
>> +	 * controller instead of going the through the TDM interface.
>> +	 *
>> +	 * Here we assume interface A uses clock A, etc ... While it is
>> +	 * true for now, it could be different. Instead the glue should
>> +	 * find out the clock used by the interface and select the same
>> +	 * source. For that, we will need regmap backed clock mux which
>> +	 * is a work in progress
>> +	 */
>> +	snd_soc_component_update_bits(component, e->reg,
>> +				      CTRL0_MCLK_SEL,
>> +				      FIELD_PREP(CTRL0_MCLK_SEL, mux));
>> +
>> +	snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
>> +
>> +	return 0;
>> +}
> 
> Instead of duplicating this function, I'd prefer if you could use regmap fields
> 
> 

Sure, will do
Mark Brown May 19, 2021, 4:10 p.m. UTC | #3
On Thu, 29 Apr 2021 19:01:47 +0200, Neil Armstrong wrote:
> This adds support for the TOACODEC found in Amlogic SM1 SoCs.
> 
> The bits are shifted for more selection of clock sources, so this only
> maps the same support for G12A to the SM1 bits.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: meson: g12a-toacodec: add support for SM1 TOACODEC
      commit: 7487238c5f530b418745ce134d1b0a7fba3a0d8d

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/meson/g12a-toacodec.c b/sound/soc/meson/g12a-toacodec.c
index 9339fabccb79..9c1c6b65baad 100644
--- a/sound/soc/meson/g12a-toacodec.c
+++ b/sound/soc/meson/g12a-toacodec.c
@@ -23,15 +23,27 @@ 
 #define  CTRL0_ENABLE_SHIFT		31
 #define  CTRL0_DAT_SEL_SHIFT		14
 #define  CTRL0_DAT_SEL			(0x3 << CTRL0_DAT_SEL_SHIFT)
+#define  CTRL0_DAT_SEL_SHIFT_SM1	18
+#define  CTRL0_DAT_SEL_SM1		(0x3 << CTRL0_DAT_SEL_SHIFT_SM1)
 #define  CTRL0_LANE_SEL			12
+#define  CTRL0_LANE_SEL_SM1		16
 #define  CTRL0_LRCLK_SEL		GENMASK(9, 8)
+#define  CTRL0_LRCLK_INV_SM1		BIT(10)
+#define  CTRL0_LRCLK_SEL_SM1		GENMASK(14, 12)
 #define  CTRL0_BLK_CAP_INV		BIT(7)
+#define  CTRL0_BLK_CAP_INV_SM1		BIT(9)
 #define  CTRL0_BCLK_O_INV		BIT(6)
+#define  CTRL0_BCLK_O_INV_SM1		BIT(8)
 #define  CTRL0_BCLK_SEL			GENMASK(5, 4)
+#define  CTRL0_BCLK_SEL_SM1		GENMASK(6, 4)
 #define  CTRL0_MCLK_SEL			GENMASK(2, 0)
 
 #define TOACODEC_OUT_CHMAX		2
 
+struct g12a_toacodec_match_data {
+	const struct snd_soc_component_driver *component_drv;
+};
+
 static const char * const g12a_toacodec_mux_texts[] = {
 	"I2S A", "I2S B", "I2S C",
 };
@@ -85,15 +97,73 @@  static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int sm1_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_kcontrol_component(kcontrol);
+	struct snd_soc_dapm_context *dapm =
+		snd_soc_dapm_kcontrol_dapm(kcontrol);
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+	unsigned int mux, changed;
+
+	mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
+	changed = snd_soc_component_test_bits(component, e->reg,
+					      CTRL0_DAT_SEL_SM1,
+					      FIELD_PREP(CTRL0_DAT_SEL_SM1, mux));
+
+	if (!changed)
+		return 0;
+
+	/* Force disconnect of the mux while updating */
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
+
+	snd_soc_component_update_bits(component, e->reg,
+				      CTRL0_DAT_SEL_SM1 |
+				      CTRL0_LRCLK_SEL_SM1 |
+				      CTRL0_BCLK_SEL_SM1,
+				      FIELD_PREP(CTRL0_DAT_SEL_SM1, mux) |
+				      FIELD_PREP(CTRL0_LRCLK_SEL_SM1, mux) |
+				      FIELD_PREP(CTRL0_BCLK_SEL_SM1, mux));
+
+	/*
+	 * FIXME:
+	 * On this soc, the glue gets the MCLK directly from the clock
+	 * controller instead of going the through the TDM interface.
+	 *
+	 * Here we assume interface A uses clock A, etc ... While it is
+	 * true for now, it could be different. Instead the glue should
+	 * find out the clock used by the interface and select the same
+	 * source. For that, we will need regmap backed clock mux which
+	 * is a work in progress
+	 */
+	snd_soc_component_update_bits(component, e->reg,
+				      CTRL0_MCLK_SEL,
+				      FIELD_PREP(CTRL0_MCLK_SEL, mux));
+
+	snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+
+	return 0;
+}
+
 static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0,
 			    CTRL0_DAT_SEL_SHIFT,
 			    g12a_toacodec_mux_texts);
 
+static SOC_ENUM_SINGLE_DECL(sm1_toacodec_mux_enum, TOACODEC_CTRL0,
+			    CTRL0_DAT_SEL_SHIFT_SM1,
+			    g12a_toacodec_mux_texts);
+
 static const struct snd_kcontrol_new g12a_toacodec_mux =
 	SOC_DAPM_ENUM_EXT("Source", g12a_toacodec_mux_enum,
 			  snd_soc_dapm_get_enum_double,
 			  g12a_toacodec_mux_put_enum);
 
+static const struct snd_kcontrol_new sm1_toacodec_mux =
+	SOC_DAPM_ENUM_EXT("Source", sm1_toacodec_mux_enum,
+			  snd_soc_dapm_get_enum_double,
+			  sm1_toacodec_mux_put_enum);
+
 static const struct snd_kcontrol_new g12a_toacodec_out_enable =
 	SOC_DAPM_SINGLE_AUTODISABLE("Switch", TOACODEC_CTRL0,
 				    CTRL0_ENABLE_SHIFT, 1, 0);
@@ -105,6 +175,13 @@  static const struct snd_soc_dapm_widget g12a_toacodec_widgets[] = {
 			    &g12a_toacodec_out_enable),
 };
 
+static const struct snd_soc_dapm_widget sm1_toacodec_widgets[] = {
+	SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
+			 &sm1_toacodec_mux),
+	SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0,
+			    &g12a_toacodec_out_enable),
+};
+
 static int g12a_toacodec_input_hw_params(struct snd_pcm_substream *substream,
 					 struct snd_pcm_hw_params *params,
 					 struct snd_soc_dai *dai)
@@ -175,6 +252,13 @@  static int g12a_toacodec_component_probe(struct snd_soc_component *c)
 				       CTRL0_BLK_CAP_INV);
 }
 
+static int sm1_toacodec_component_probe(struct snd_soc_component *c)
+{
+	/* Initialize the static clock parameters */
+	return snd_soc_component_write(c, TOACODEC_CTRL0,
+				       CTRL0_BLK_CAP_INV_SM1);
+}
+
 static const struct snd_soc_dapm_route g12a_toacodec_routes[] = {
 	{ "SRC", "I2S A", "IN A Playback" },
 	{ "SRC", "I2S B", "IN B Playback" },
@@ -187,6 +271,10 @@  static const struct snd_kcontrol_new g12a_toacodec_controls[] = {
 	SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL, 3, 0),
 };
 
+static const struct snd_kcontrol_new sm1_toacodec_controls[] = {
+	SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 3, 0),
+};
+
 static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
 	.probe			= g12a_toacodec_component_probe,
 	.controls		= g12a_toacodec_controls,
@@ -199,25 +287,59 @@  static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
 	.non_legacy_dai_naming	= 1,
 };
 
+static const struct snd_soc_component_driver sm1_toacodec_component_drv = {
+	.probe			= sm1_toacodec_component_probe,
+	.controls		= sm1_toacodec_controls,
+	.num_controls		= ARRAY_SIZE(sm1_toacodec_controls),
+	.dapm_widgets		= sm1_toacodec_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(sm1_toacodec_widgets),
+	.dapm_routes		= g12a_toacodec_routes,
+	.num_dapm_routes	= ARRAY_SIZE(g12a_toacodec_routes),
+	.endianness		= 1,
+	.non_legacy_dai_naming	= 1,
+};
+
 static const struct regmap_config g12a_toacodec_regmap_cfg = {
 	.reg_bits	= 32,
 	.val_bits	= 32,
 	.reg_stride	= 4,
 };
 
+static const struct g12a_toacodec_match_data g12a_toacodec_match_data = {
+	.component_drv          = &g12a_toacodec_component_drv,
+};
+
+static const struct g12a_toacodec_match_data sm1_toacodec_match_data = {
+	.component_drv          = &sm1_toacodec_component_drv,
+};
+
 static const struct of_device_id g12a_toacodec_of_match[] = {
-	{ .compatible = "amlogic,g12a-toacodec", },
+	{
+		.compatible = "amlogic,g12a-toacodec",
+		.data = &g12a_toacodec_match_data,
+	},
+	{
+		.compatible = "amlogic,sm1-toacodec",
+		.data = &sm1_toacodec_match_data,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, g12a_toacodec_of_match);
 
 static int g12a_toacodec_probe(struct platform_device *pdev)
 {
+	const struct g12a_toacodec_match_data *data;
 	struct device *dev = &pdev->dev;
 	void __iomem *regs;
 	struct regmap *map;
 	int ret;
 
+	data = device_get_match_data(dev);
+	if (!data) {
+		dev_err(dev, "failed to match device\n");
+		return -ENODEV;
+	}
+
 	ret = device_reset(dev);
 	if (ret)
 		return ret;
@@ -234,7 +356,7 @@  static int g12a_toacodec_probe(struct platform_device *pdev)
 	}
 
 	return devm_snd_soc_register_component(dev,
-			&g12a_toacodec_component_drv, g12a_toacodec_dai_drv,
+			data->component_drv, g12a_toacodec_dai_drv,
 			ARRAY_SIZE(g12a_toacodec_dai_drv));
 }