new file mode 100644
@@ -0,0 +1,719 @@
+/*
+ * Maxim MAX34451 PMBus 16-Channel V/I monitor and 12-Channel Sequencer/Marginer
+ *
+ * Copyright 2021 Google LLC
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "hw/i2c/pmbus_device.h"
+#include "hw/irq.h"
+#include "qapi/error.h"
+#include "qapi/visitor.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+
+#define TYPE_MAX34451 "max34451"
+#define MAX34451(obj) OBJECT_CHECK(MAX34451State, (obj), TYPE_MAX34451)
+
+#define MAX34451_MFR_MODE 0xD1
+#define MAX34451_MFR_PSEN_CONFIG 0xD2
+#define MAX34451_MFR_VOUT_PEAK 0xD4
+#define MAX34451_MFR_IOUT_PEAK 0xD5
+#define MAX34451_MFR_TEMPERATURE_PEAK 0xD6
+#define MAX34451_MFR_VOUT_MIN 0xD7
+#define MAX34451_MFR_NV_LOG_CONFIG 0xD8
+#define MAX34451_MFR_FAULT_RESPONSE 0xD9
+#define MAX34451_MFR_FAULT_RETRY 0xDA
+#define MAX34451_MFR_NV_FAULT_LOG 0xDC
+#define MAX34451_MFR_TIME_COUNT 0xDD
+#define MAX34451_MFR_MARGIN_CONFIG 0xDF
+#define MAX34451_MFR_FW_SERIAL 0xE0
+#define MAX34451_MFR_IOUT_AVG 0xE2
+#define MAX34451_MFR_CHANNEL_CONFIG 0xE4
+#define MAX34451_MFR_TON_SEQ_MAX 0xE6
+#define MAX34451_MFR_PWM_CONFIG 0xE7
+#define MAX34451_MFR_SEQ_CONFIG 0xE8
+#define MAX34451_MFR_STORE_ALL 0xEE
+#define MAX34451_MFR_RESTORE_ALL 0xEF
+#define MAX34451_MFR_TEMP_SENSOR_CONFIG 0xF0
+#define MAX34451_MFR_STORE_SINGLE 0xFC
+#define MAX34451_MFR_CRC 0xFE
+
+#define MAX34451_NUM_MARGINED_PSU 12
+#define MAX34451_NUM_PWR_DEVICES 16
+#define MAX34451_NUM_TEMP_DEVICES 5
+#define MAX34451_NUM_PAGES 21
+
+#define DEFAULT_OP_ON 0x80
+#define DEFAULT_CAPABILITY 0x20
+#define DEFAULT_ON_OFF_CONFIG 0x1a
+#define DEFAULT_VOUT_MODE 0x40
+#define DEFAULT_TEMPERATURE 2500
+#define DEFAULT_SCALE 0x7FFF
+#define DEFAULT_OV_LIMIT 0x7FFF
+#define DEFAULT_OC_LIMIT 0x7FFF
+#define DEFAULT_OT_LIMIT 0x7FFF
+#define DEFAULT_VMIN 0x7FFF
+#define DEFAULT_TON_FAULT_LIMIT 0xFFFF
+#define DEFAULT_CHANNEL_CONFIG 0x20
+#define DEFAULT_TEXT 0x3130313031303130
+
+/**
+ * MAX34451State:
+ * @code: The command code received
+ * @page: Each page corresponds to a device monitored by the Max 34451
+ * The page register determines the available commands depending on device
+ ___________________________________________________________________________
+ | 0 | Power supply monitored by RS0, controlled by PSEN0, and |
+ | | margined with PWM0. |
+ |_______|___________________________________________________________________|
+ | 1 | Power supply monitored by RS1, controlled by PSEN1, and |
+ | | margined with PWM1. |
+ |_______|___________________________________________________________________|
+ | 2 | Power supply monitored by RS2, controlled by PSEN2, and |
+ | | margined with PWM2. |
+ |_______|___________________________________________________________________|
+ | 3 | Power supply monitored by RS3, controlled by PSEN3, and |
+ | | margined with PWM3. |
+ |_______|___________________________________________________________________|
+ | 4 | Power supply monitored by RS4, controlled by PSEN4, and |
+ | | margined with PWM4. |
+ |_______|___________________________________________________________________|
+ | 5 | Power supply monitored by RS5, controlled by PSEN5, and |
+ | | margined with PWM5. |
+ |_______|___________________________________________________________________|
+ | 6 | Power supply monitored by RS6, controlled by PSEN6, and |
+ | | margined with PWM6. |
+ |_______|___________________________________________________________________|
+ | 7 | Power supply monitored by RS7, controlled by PSEN7, and |
+ | | margined with PWM7. |
+ |_______|___________________________________________________________________|
+ | 8 | Power supply monitored by RS8, controlled by PSEN8, and |
+ | | optionally margined by OUT0 of external DS4424 at I2C address A0h.|
+ |_______|___________________________________________________________________|
+ | 9 | Power supply monitored by RS9, controlled by PSEN9, and |
+ | | optionally margined by OUT1 of external DS4424 at I2C address A0h.|
+ |_______|___________________________________________________________________|
+ | 10 | Power supply monitored by RS10, controlled by PSEN10, and |
+ | | optionally margined by OUT2 of external DS4424 at I2C address A0h.|
+ |_______|___________________________________________________________________|
+ | 11 | Power supply monitored by RS11, controlled by PSEN11, and |
+ | | optionally margined by OUT3 of external DS4424 at I2C address A0h.|
+ |_______|___________________________________________________________________|
+ | 12 | ADC channel 12 (monitors voltage or current) or GPI. |
+ |_______|___________________________________________________________________|
+ | 13 | ADC channel 13 (monitors voltage or current) or GPI. |
+ |_______|___________________________________________________________________|
+ | 14 | ADC channel 14 (monitors voltage or current) or GPI. |
+ |_______|___________________________________________________________________|
+ | 15 | ADC channel 15 (monitors voltage or current) or GPI. |
+ |_______|___________________________________________________________________|
+ | 16 | Internal temperature sensor. |
+ |_______|___________________________________________________________________|
+ | 17 | External DS75LV temperature sensor with I2C address 90h. |
+ |_______|___________________________________________________________________|
+ | 18 | External DS75LV temperature sensor with I2C address 92h. |
+ |_______|___________________________________________________________________|
+ | 19 | External DS75LV temperature sensor with I2C address 94h. |
+ |_______|___________________________________________________________________|
+ | 20 | External DS75LV temperature sensor with I2C address 96h. |
+ |_______|___________________________________________________________________|
+ | 21–254| Reserved. |
+ |_______|___________________________________________________________________|
+ | 255 | Applies to all pages. |
+ |_______|___________________________________________________________________|
+ *
+ * @operation: Turn on and off power supplies
+ * @on_off_config: Configure the power supply on and off transition behaviour
+ * @write_protect: protect against changes to the device's memory
+ * @vout_margin_high: the voltage when OPERATION is set to margin high
+ * @vout_margin_low: the voltage when OPERATION is set to margin low
+ * @vout_scale: scale ADC reading to actual device reading if different
+ * @iout_cal_gain: set ratio of the voltage at the ADC input to sensed current
+ */
+typedef struct MAX34451State {
+ PMBusDevice parent;
+
+ uint16_t power_good_on[MAX34451_NUM_PWR_DEVICES];
+ uint16_t power_good_off[MAX34451_NUM_PWR_DEVICES];
+ uint16_t ton_delay[MAX34451_NUM_MARGINED_PSU];
+ uint16_t ton_max_fault_limit[MAX34451_NUM_MARGINED_PSU];
+ uint16_t toff_delay[MAX34451_NUM_MARGINED_PSU];
+ uint8_t status_mfr_specific[MAX34451_NUM_PWR_DEVICES];
+ /* Manufacturer specific function */
+ uint64_t mfr_location;
+ uint64_t mfr_date;
+ uint64_t mfr_serial;
+ uint16_t mfr_mode;
+ uint32_t psen_config[MAX34451_NUM_MARGINED_PSU];
+ uint16_t vout_peak[MAX34451_NUM_PWR_DEVICES];
+ uint16_t iout_peak[MAX34451_NUM_PWR_DEVICES];
+ uint16_t temperature_peak[MAX34451_NUM_TEMP_DEVICES];
+ uint16_t vout_min[MAX34451_NUM_PWR_DEVICES];
+ uint16_t nv_log_config;
+ uint32_t fault_response[MAX34451_NUM_PWR_DEVICES];
+ uint16_t fault_retry;
+ uint32_t fault_log;
+ uint32_t time_count;
+ uint16_t margin_config[MAX34451_NUM_MARGINED_PSU];
+ uint16_t fw_serial;
+ uint16_t iout_avg[MAX34451_NUM_PWR_DEVICES];
+ uint16_t channel_config[MAX34451_NUM_PWR_DEVICES];
+ uint16_t ton_seq_max[MAX34451_NUM_MARGINED_PSU];
+ uint32_t pwm_config[MAX34451_NUM_MARGINED_PSU];
+ uint32_t seq_config[MAX34451_NUM_MARGINED_PSU];
+ uint16_t temp_sensor_config[MAX34451_NUM_TEMP_DEVICES];
+ uint16_t store_single;
+ uint16_t crc;
+} MAX34451State;
+
+
+static void max34451_check_limits(MAX34451State *s)
+{
+ PMBusDevice *pmdev = PMBUS_DEVICE(s);
+
+ pmbus_check_limits(pmdev);
+
+ for (int i = 0; i < MAX34451_NUM_PWR_DEVICES; i++) {
+ if (pmdev->pages[i].read_vout == 0) { /* PSU disabled */
+ continue;
+ }
+
+ if (pmdev->pages[i].read_vout > s->vout_peak[i]) {
+ s->vout_peak[i] = pmdev->pages[i].read_vout;
+ }
+
+ if (pmdev->pages[i].read_vout < s->vout_min[i]) {
+ s->vout_min[i] = pmdev->pages[i].read_vout;
+ }
+
+ if (pmdev->pages[i].read_iout > s->iout_peak[i]) {
+ s->iout_peak[i] = pmdev->pages[i].read_iout;
+ }
+ }
+
+ for (int i = 0; i < MAX34451_NUM_TEMP_DEVICES; i++) {
+ if (pmdev->pages[i + 16].read_temperature_1 > s->temperature_peak[i]) {
+ s->temperature_peak[i] = pmdev->pages[i + 16].read_temperature_1;
+ }
+ }
+}
+
+static uint8_t max34451_read_byte(PMBusDevice *pmdev)
+{
+ MAX34451State *s = MAX34451(pmdev);
+ switch (pmdev->code) {
+
+ case PMBUS_POWER_GOOD_ON:
+ if (pmdev->page < 16) {
+ pmbus_send16(pmdev, s->power_good_on[pmdev->page]);
+ }
+ break;
+
+ case PMBUS_POWER_GOOD_OFF:
+ if (pmdev->page < 16) {
+ pmbus_send16(pmdev, s->power_good_off[pmdev->page]);
+ }
+ break;
+
+ case PMBUS_TON_DELAY:
+ if (pmdev->page < 12) {
+ pmbus_send16(pmdev, s->ton_delay[pmdev->page]);
+ }
+ break;
+
+ case PMBUS_TON_MAX_FAULT_LIMIT:
+ if (pmdev->page < 12) {
+ pmbus_send16(pmdev, s->ton_max_fault_limit[pmdev->page]);
+ }
+ break;
+
+ case PMBUS_TOFF_DELAY:
+ if (pmdev->page < 12) {
+ pmbus_send16(pmdev, s->toff_delay[pmdev->page]);
+ }
+ break;
+
+ case PMBUS_STATUS_MFR_SPECIFIC:
+ if (pmdev->page < 16) {
+ pmbus_send8(pmdev, s->status_mfr_specific[pmdev->page]);
+ }
+ break;
+
+ case PMBUS_MFR_ID:
+ pmbus_send8(pmdev, 0x4d); /* Maxim */
+ break;
+
+ case PMBUS_MFR_MODEL:
+ pmbus_send8(pmdev, 0x59);
+ break;
+
+ case PMBUS_MFR_LOCATION:
+ pmbus_send64(pmdev, s->mfr_location);
+ break;
+
+ case PMBUS_MFR_DATE:
+ pmbus_send64(pmdev, s->mfr_date);
+ break;
+
+ case PMBUS_MFR_SERIAL:
+ pmbus_send64(pmdev, s->mfr_serial);
+ break;
+
+ case MAX34451_MFR_MODE:
+ pmbus_send16(pmdev, s->mfr_mode);
+ break;
+
+ case MAX34451_MFR_PSEN_CONFIG:
+ if (pmdev->page < 12) {
+ pmbus_send32(pmdev, s->psen_config[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_VOUT_PEAK:
+ if (pmdev->page < 16) {
+ pmbus_send16(pmdev, s->vout_peak[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_IOUT_PEAK:
+ if (pmdev->page < 16) {
+ pmbus_send16(pmdev, s->iout_peak[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_TEMPERATURE_PEAK:
+ if (15 < pmdev->page && pmdev->page < 21) {
+ pmbus_send16(pmdev, s->temperature_peak[pmdev->page % 16]);
+ } else {
+ pmbus_send16(pmdev, s->temperature_peak[0]);
+ }
+ break;
+
+ case MAX34451_MFR_VOUT_MIN:
+ if (pmdev->page < 16) {
+ pmbus_send16(pmdev, s->vout_min[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_NV_LOG_CONFIG:
+ pmbus_send16(pmdev, s->nv_log_config);
+ break;
+
+ case MAX34451_MFR_FAULT_RESPONSE:
+ if (pmdev->page < 16) {
+ pmbus_send32(pmdev, s->fault_response[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_FAULT_RETRY:
+ pmbus_send32(pmdev, s->fault_retry);
+ break;
+
+ case MAX34451_MFR_NV_FAULT_LOG:
+ pmbus_send32(pmdev, s->fault_log);
+ break;
+
+ case MAX34451_MFR_TIME_COUNT:
+ pmbus_send32(pmdev, s->time_count);
+ break;
+
+ case MAX34451_MFR_MARGIN_CONFIG:
+ if (pmdev->page < 12) {
+ pmbus_send16(pmdev, s->margin_config[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_FW_SERIAL:
+ if (pmdev->page == 255) {
+ pmbus_send16(pmdev, 1); /* Firmware revision */
+ }
+ break;
+
+ case MAX34451_MFR_IOUT_AVG:
+ if (pmdev->page < 16) {
+ pmbus_send16(pmdev, s->iout_avg[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_CHANNEL_CONFIG:
+ if (pmdev->page < 16) {
+ pmbus_send16(pmdev, s->channel_config[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_TON_SEQ_MAX:
+ if (pmdev->page < 12) {
+ pmbus_send16(pmdev, s->ton_seq_max[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_PWM_CONFIG:
+ if (pmdev->page < 12) {
+ pmbus_send32(pmdev, s->pwm_config[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_SEQ_CONFIG:
+ if (pmdev->page < 12) {
+ pmbus_send32(pmdev, s->seq_config[pmdev->page]);
+ }
+ break;
+
+ case MAX34451_MFR_TEMP_SENSOR_CONFIG:
+ if (15 < pmdev->page && pmdev->page < 21) {
+ pmbus_send32(pmdev, s->temp_sensor_config[pmdev->page % 16]);
+ }
+ break;
+
+ case MAX34451_MFR_STORE_SINGLE:
+ pmbus_send32(pmdev, s->store_single);
+ break;
+
+ case MAX34451_MFR_CRC:
+ pmbus_send32(pmdev, s->crc);
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: reading from unsupported register: 0x%02x\n",
+ __func__, pmdev->code);
+ break;
+ }
+ return 0xFF;
+}
+
+static int max34451_write_data(PMBusDevice *pmdev, const uint8_t *buf,
+ uint8_t len)
+{
+ MAX34451State *s = MAX34451(pmdev);
+
+ if (len == 0) {
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: writing empty data\n", __func__);
+ return -1;
+ }
+
+ pmdev->code = buf[0]; /* PMBus command code */
+
+ if (len == 1) {
+ return 0;
+ }
+
+ /* Exclude command code from buffer */
+ buf++;
+ len--;
+ uint8_t index = pmdev->page;
+
+ switch (pmdev->code) {
+ case MAX34451_MFR_STORE_ALL:
+ case MAX34451_MFR_RESTORE_ALL:
+ case MAX34451_MFR_STORE_SINGLE:
+ /*
+ * TODO: hardware behaviour is to move the contents of volatile
+ * memory to non-volatile memory.
+ */
+ break;
+
+ case PMBUS_POWER_GOOD_ON: /* R/W word */
+ if (pmdev->page < MAX34451_NUM_PWR_DEVICES) {
+ s->power_good_on[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case PMBUS_POWER_GOOD_OFF: /* R/W word */
+ if (pmdev->page < MAX34451_NUM_PWR_DEVICES) {
+ s->power_good_off[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case PMBUS_TON_DELAY: /* R/W word */
+ if (pmdev->page < 12) {
+ s->ton_delay[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case PMBUS_TON_MAX_FAULT_LIMIT: /* R/W word */
+ if (pmdev->page < 12) {
+ s->ton_max_fault_limit[pmdev->page]
+ = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case PMBUS_TOFF_DELAY: /* R/W word */
+ if (pmdev->page < 12) {
+ s->toff_delay[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case PMBUS_MFR_LOCATION: /* R/W 64 */
+ s->mfr_location = pmbus_receive64(pmdev);
+ break;
+
+ case PMBUS_MFR_DATE: /* R/W 64 */
+ s->mfr_date = pmbus_receive64(pmdev);
+ break;
+
+ case PMBUS_MFR_SERIAL: /* R/W 64 */
+ s->mfr_serial = pmbus_receive64(pmdev);
+ break;
+
+ case MAX34451_MFR_MODE: /* R/W word */
+ s->mfr_mode = pmbus_receive16(pmdev);
+ break;
+
+ case MAX34451_MFR_PSEN_CONFIG: /* R/W 32 */
+ if (pmdev->page < 12) {
+ s->psen_config[pmdev->page] = pmbus_receive32(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_VOUT_PEAK: /* R/W word */
+ if (pmdev->page < 16) {
+ s->vout_peak[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_IOUT_PEAK: /* R/W word */
+ if (pmdev->page < 16) {
+ s->iout_peak[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_TEMPERATURE_PEAK: /* R/W word */
+ if (15 < pmdev->page && pmdev->page < 21) {
+ s->temperature_peak[pmdev->page % 16]
+ = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_VOUT_MIN: /* R/W word */
+ if (pmdev->page < 16) {
+ s->vout_min[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_NV_LOG_CONFIG: /* R/W word */
+ s->nv_log_config = pmbus_receive16(pmdev);
+ break;
+
+ case MAX34451_MFR_FAULT_RESPONSE: /* R/W 32 */
+ if (pmdev->page < 16) {
+ s->fault_response[pmdev->page] = pmbus_receive32(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_FAULT_RETRY: /* R/W word */
+ s->fault_retry = pmbus_receive16(pmdev);
+ break;
+
+ case MAX34451_MFR_TIME_COUNT: /* R/W 32 */
+ s->time_count = pmbus_receive32(pmdev);
+ break;
+
+ case MAX34451_MFR_MARGIN_CONFIG: /* R/W word */
+ if (pmdev->page < 12) {
+ s->margin_config[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_CHANNEL_CONFIG: /* R/W word */
+ if (pmdev->page < 16) {
+ s->channel_config[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_TON_SEQ_MAX: /* R/W word */
+ if (pmdev->page < 12) {
+ s->ton_seq_max[pmdev->page] = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_PWM_CONFIG: /* R/W 32 */
+ if (pmdev->page < 12) {
+ s->pwm_config[pmdev->page] = pmbus_receive32(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_SEQ_CONFIG: /* R/W 32 */
+ if (pmdev->page < 12) {
+ s->seq_config[pmdev->page] = pmbus_receive32(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_TEMP_SENSOR_CONFIG: /* R/W word */
+ if (15 < pmdev->page && pmdev->page < 21) {
+ s->temp_sensor_config[pmdev->page % 16]
+ = pmbus_receive16(pmdev);
+ }
+ break;
+
+ case MAX34451_MFR_CRC: /* R/W word */
+ s->crc = pmbus_receive16(pmdev);
+ break;
+
+ case MAX34451_MFR_NV_FAULT_LOG:
+ case MAX34451_MFR_FW_SERIAL:
+ case MAX34451_MFR_IOUT_AVG:
+ /* Read only commands */
+ pmdev->pages[index].status_word |= PMBUS_STATUS_CML;
+ pmdev->pages[index].status_cml |= PB_CML_FAULT_INVALID_DATA;
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: writing to read-only register 0x%02x\n",
+ __func__, pmdev->code);
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: writing to unsupported register: 0x%02x\n",
+ __func__, pmdev->code);
+ break;
+ }
+
+ return 0;
+}
+
+static void max34451_get(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ visit_type_uint16(v, name, (uint16_t *)opaque, errp);
+}
+
+static void max34451_set(Object *obj, Visitor *v, const char *name,
+ void *opaque, Error **errp)
+{
+ MAX34451State *s = MAX34451(obj);
+ uint16_t *internal = opaque;
+ uint16_t value;
+ if (!visit_type_uint16(v, name, &value, errp)) {
+ return;
+ }
+
+ *internal = value;
+ max34451_check_limits(s);
+}
+
+/* used to init uint16_t arrays */
+static inline void *memset_word(void *s, uint16_t c, size_t n)
+{
+ size_t i;
+ uint16_t *p = s;
+
+ for (i = 0; i < n; i++) {
+ p[i] = c;
+ }
+
+ return s;
+}
+
+static void max34451_exit_reset(Object *obj)
+{
+ PMBusDevice *pmdev = PMBUS_DEVICE(obj);
+ MAX34451State *s = MAX34451(obj);
+ pmdev->capability = DEFAULT_CAPABILITY;
+
+ for (int i = 0; i < MAX34451_NUM_PAGES; i++) {
+ pmdev->pages[i].operation = DEFAULT_OP_ON;
+ pmdev->pages[i].on_off_config = DEFAULT_ON_OFF_CONFIG;
+ pmdev->pages[i].revision = 0x11;
+ pmdev->pages[i].vout_mode = DEFAULT_VOUT_MODE;
+ }
+
+ for (int i = 0; i < MAX34451_NUM_PWR_DEVICES; i++) {
+ pmdev->pages[i].vout_scale_monitor = DEFAULT_SCALE;
+ pmdev->pages[i].vout_ov_fault_limit = DEFAULT_OV_LIMIT;
+ pmdev->pages[i].vout_ov_warn_limit = DEFAULT_OV_LIMIT;
+ pmdev->pages[i].iout_oc_warn_limit = DEFAULT_OC_LIMIT;
+ pmdev->pages[i].iout_oc_fault_limit = DEFAULT_OC_LIMIT;
+ }
+
+ for (int i = 0; i < MAX34451_NUM_MARGINED_PSU; i++) {
+ pmdev->pages[i].ton_max_fault_limit = DEFAULT_TON_FAULT_LIMIT;
+ }
+
+ for (int i = 16; i < MAX34451_NUM_TEMP_DEVICES + 16; i++) {
+ pmdev->pages[i].read_temperature_1 = DEFAULT_TEMPERATURE;
+ pmdev->pages[i].ot_warn_limit = DEFAULT_OT_LIMIT;
+ pmdev->pages[i].ot_fault_limit = DEFAULT_OT_LIMIT;
+ }
+
+ memset_word(s->ton_max_fault_limit, DEFAULT_TON_FAULT_LIMIT,
+ MAX34451_NUM_MARGINED_PSU);
+ memset_word(s->channel_config, DEFAULT_CHANNEL_CONFIG,
+ MAX34451_NUM_PWR_DEVICES);
+ memset_word(s->vout_min, DEFAULT_VMIN, MAX34451_NUM_PWR_DEVICES);
+
+ s->mfr_location = DEFAULT_TEXT;
+ s->mfr_date = DEFAULT_TEXT;
+ s->mfr_serial = DEFAULT_TEXT;
+}
+
+static void max34451_init(Object *obj)
+{
+ PMBusDevice *pmdev = PMBUS_DEVICE(obj);
+ uint64_t psu_flags = PB_HAS_VOUT | PB_HAS_IOUT | PB_HAS_VOUT_MODE |
+ PB_HAS_IOUT_GAIN;
+
+ for (int i = 0; i < MAX34451_NUM_PWR_DEVICES; i++) {
+ pmbus_page_config(pmdev, i, psu_flags);
+ }
+
+ for (int i = 0; i < MAX34451_NUM_MARGINED_PSU; i++) {
+ pmbus_page_config(pmdev, i, psu_flags | PB_HAS_VOUT_MARGIN);
+ }
+
+ for (int i = 16; i < MAX34451_NUM_TEMP_DEVICES + 16; i++) {
+ pmbus_page_config(pmdev, i, PB_HAS_TEMPERATURE | PB_HAS_VOUT_MODE);
+ }
+
+ /* get and set the voltage in millivolts, max is 32767 mV */
+ for (int i = 0; i < MAX34451_NUM_PWR_DEVICES; i++) {
+ object_property_add(obj, "vout[*]", "uint16",
+ max34451_get,
+ max34451_set, NULL, &pmdev->pages[i].read_vout);
+ }
+
+ /*
+ * get and set the temperature of the internal temperature sensor in
+ * centidegrees Celcius i.e.: 2500 -> 25.00 C, max is 327.67 C
+ */
+ for (int i = 0; i < MAX34451_NUM_TEMP_DEVICES; i++) {
+ object_property_add(obj, "temperature[*]", "uint16",
+ max34451_get,
+ max34451_set,
+ NULL,
+ &pmdev->pages[i + 16].read_temperature_1);
+ }
+
+}
+
+static void max34451_class_init(ObjectClass *klass, void *data)
+{
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PMBusDeviceClass *k = PMBUS_DEVICE_CLASS(klass);
+ dc->desc = "Maxim MAX34451 16-Channel V/I monitor";
+ k->write_data = max34451_write_data;
+ k->receive_byte = max34451_read_byte;
+ k->device_num_pages = MAX34451_NUM_PAGES;
+ /* k->quick_cmd */
+ /* rc->phase.enter */
+ /* rc->phases.hold */
+ rc->phases.exit = max34451_exit_reset;
+}
+
+static const TypeInfo max34451_info = {
+ .name = TYPE_MAX34451,
+ .parent = TYPE_PMBUS_DEVICE,
+ .instance_size = sizeof(MAX34451State),
+ .instance_init = max34451_init,
+ .class_init = max34451_class_init,
+};
+
+static void max34451_register_types(void)
+{
+ type_register_static(&max34451_info);
+}
+
+type_init(max34451_register_types)
@@ -373,6 +373,7 @@ config NPCM7XX
select ADM1272
select ARM_GIC
select AT24C # EEPROM
+ select MAX34451
select PL310 # cache controller
select PMBUS
select SERIAL
@@ -30,6 +30,10 @@ config EMC141X
bool
depends on I2C
+config MAX34451
+ bool
+ depends on I2C
+
config ISA_DEBUG
bool
depends on ISA_BUS
@@ -11,6 +11,7 @@ softmmu_ss.add(when: 'CONFIG_TMP105', if_true: files('tmp105.c'))
softmmu_ss.add(when: 'CONFIG_TMP421', if_true: files('tmp421.c'))
softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c'))
softmmu_ss.add(when: 'CONFIG_ADM1272', if_true: files('adm1272.c'))
+softmmu_ss.add(when: 'CONFIG_MAX34451', if_true: files('max34451.c'))
softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c'))
softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c'))
softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c'))