| Message ID | 20210510092631.3141204-1-ikjn@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: mt8183: add cbas node under cros_ec | expand |
Hi Ikjoon, On 10/05/2021 11:26, Ikjoon Jang wrote: > Add a 'cbas' device node for supporting table mode switch in > kukui devices. > > Kukui platforms with detacheable base have an additional input > device under cros-ec, which reports SW_TABLET_MODE regarding > its base state (e.g. base flipped or detached). > > Signed-off-by: Ikjoon Jang <ikjn@chromium.org> > --- > > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > index ff56bcfa3370..40030ed48854 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > @@ -816,6 +816,10 @@ usbc_extcon: extcon0 { > compatible = "google,extcon-usbc-cros-ec"; > google,usb-port-id = <0>; > }; > + > + base_detection: cbas { > + compatible = "google,cros-cbas"; I'm not able to find any binding description for this. It seems linux-next has driver binding to this compatible, but the description is missing. Can you please clarify. Thanks, Mathias > + }; > }; > }; > >
On Thu, May 13, 2021 at 12:38 AM Matthias Brugger <matthias.bgg@gmail.com> wrote: > > Hi Ikjoon, > > On 10/05/2021 11:26, Ikjoon Jang wrote: > > Add a 'cbas' device node for supporting table mode switch in tablet > > kukui devices. > > > > Kukui platforms with detacheable base have an additional input > > device under cros-ec, which reports SW_TABLET_MODE regarding > > its base state (e.g. base flipped or detached). > > > > Signed-off-by: Ikjoon Jang <ikjn@chromium.org> > > --- > > > > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > > index ff56bcfa3370..40030ed48854 100644 > > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > > @@ -816,6 +816,10 @@ usbc_extcon: extcon0 { > > compatible = "google,extcon-usbc-cros-ec"; > > google,usb-port-id = <0>; > > }; > > + > > + base_detection: cbas { > > + compatible = "google,cros-cbas"; > > I'm not able to find any binding description for this. It seems linux-next has > driver binding to this compatible, but the description is missing. > > Can you please clarify. Yep, that's correct. Let me resend this with v2 after the dt-binding patch is applied. In this series, I requested queueing these to hid tree: [v5, 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-2-ikjn@chromium.org/ [v5, 2/2] HID: google: Add of_match table to Whiskers switch device. https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-3-ikjn@chromium.org/ Later I found that I missed a comment from [v5, 1/2] But only [v5, 2/2] part is already applied to hid tree as I asked for it. I sent a v6 dt-binding patch is here (not yet applied) https://patchwork.kernel.org/project/linux-input/patch/20210512100832.3878138-1-ikjn@chromium.org/ > > Thanks, > Mathias > > > + }; > > }; > > }; > > > >
Hi Ikjoon, Thank you for the patch. On 13/5/21 3:45, Ikjoon Jang wrote: > On Thu, May 13, 2021 at 12:38 AM Matthias Brugger > <matthias.bgg@gmail.com> wrote: >> >> Hi Ikjoon, >> >> On 10/05/2021 11:26, Ikjoon Jang wrote: >>> Add a 'cbas' device node for supporting table mode switch in > > tablet > >>> kukui devices. >>> >>> Kukui platforms with detacheable base have an additional input >>> device under cros-ec, which reports SW_TABLET_MODE regarding >>> its base state (e.g. base flipped or detached). >>> >>> Signed-off-by: Ikjoon Jang <ikjn@chromium.org> >>> --- >>> >>> arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++ >>> 1 file changed, 4 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi >>> index ff56bcfa3370..40030ed48854 100644 >>> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi >>> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi >>> @@ -816,6 +816,10 @@ usbc_extcon: extcon0 { >>> compatible = "google,extcon-usbc-cros-ec"; >>> google,usb-port-id = <0>; >>> }; >>> + >>> + base_detection: cbas { This should be just cbas, remove base_detection. It was a bit confusing follow these series. If [v5, 2/2] is already applied in hid tree, I'd suggest send a v7 version including: [v7, 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device [v7, 2/2] arm64: dts: mt8183: add cbas node under cros_ec Both patches can go through the Matthias tree, but the first one also needs an Ack from Lee Jones, MFD maintainer, which I think is not cc'ied, so unlikely to give you the needed ack. Thanks, Enric >>> + compatible = "google,cros-cbas"; >> >> I'm not able to find any binding description for this. It seems linux-next has >> driver binding to this compatible, but the description is missing. >> >> Can you please clarify. > > Yep, that's correct. > Let me resend this with v2 after the dt-binding patch is applied. > > In this series, I requested queueing these to hid tree: > > [v5, 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device > https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-2-ikjn@chromium.org/ > > [v5, 2/2] HID: google: Add of_match table to Whiskers switch device. > https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-3-ikjn@chromium.org/ > > Later I found that I missed a comment from [v5, 1/2] > But only [v5, 2/2] part is already applied to hid tree as I asked for it. > > I sent a v6 dt-binding patch is here (not yet applied) > https://patchwork.kernel.org/project/linux-input/patch/20210512100832.3878138-1-ikjn@chromium.org/ > >> >> Thanks, >> Mathias >> >>> + }; >>> }; >>> }; >>> >>>
On Fri, May 14, 2021 at 4:55 PM Enric Balletbo i Serra <enric.balletbo@collabora.com> wrote: > > Hi Ikjoon, > > Thank you for the patch. > > On 13/5/21 3:45, Ikjoon Jang wrote: > > On Thu, May 13, 2021 at 12:38 AM Matthias Brugger > > <matthias.bgg@gmail.com> wrote: > >> > >> Hi Ikjoon, > >> > >> On 10/05/2021 11:26, Ikjoon Jang wrote: > >>> Add a 'cbas' device node for supporting table mode switch in > > > > tablet > > > >>> kukui devices. > >>> > >>> Kukui platforms with detacheable base have an additional input > >>> device under cros-ec, which reports SW_TABLET_MODE regarding > >>> its base state (e.g. base flipped or detached). > >>> > >>> Signed-off-by: Ikjoon Jang <ikjn@chromium.org> > >>> --- > >>> > >>> arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++ > >>> 1 file changed, 4 insertions(+) > >>> > >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > >>> index ff56bcfa3370..40030ed48854 100644 > >>> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > >>> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi > >>> @@ -816,6 +816,10 @@ usbc_extcon: extcon0 { > >>> compatible = "google,extcon-usbc-cros-ec"; > >>> google,usb-port-id = <0>; > >>> }; > >>> + > >>> + base_detection: cbas { > > > This should be just cbas, remove base_detection. It was a bit confusing follow > these series. If [v5, 2/2] is already applied in hid tree, I'd suggest send a v7 > version including: > > [v7, 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device > [v7, 2/2] arm64: dts: mt8183: add cbas node under cros_ec sure, let me upload v7 with dt-bindings + mt8183.dtsi together. > > Both patches can go through the Matthias tree, but the first one also needs an > Ack from Lee Jones, MFD maintainer, which I think is not cc'ied, so unlikely to > give you the needed ack. Oops.. :-S (Why did I think this should go through hid?) Thanks a lot for pointing out the basic but critical mistake. > > Thanks, > Enric > > > >>> + compatible = "google,cros-cbas"; > >> > >> I'm not able to find any binding description for this. It seems linux-next has > >> driver binding to this compatible, but the description is missing. > >> > >> Can you please clarify. > > > > Yep, that's correct. > > Let me resend this with v2 after the dt-binding patch is applied. > > > > In this series, I requested queueing these to hid tree: > > > > [v5, 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device > > https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-2-ikjn@chromium.org/ > > > > [v5, 2/2] HID: google: Add of_match table to Whiskers switch device. > > https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-3-ikjn@chromium.org/ > > > > Later I found that I missed a comment from [v5, 1/2] > > But only [v5, 2/2] part is already applied to hid tree as I asked for it. > > > > I sent a v6 dt-binding patch is here (not yet applied) > > https://patchwork.kernel.org/project/linux-input/patch/20210512100832.3878138-1-ikjn@chromium.org/ > > > >> > >> Thanks, > >> Mathias > >> > >>> + }; > >>> }; > >>> }; > >>> > >>>
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index ff56bcfa3370..40030ed48854 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -816,6 +816,10 @@ usbc_extcon: extcon0 { compatible = "google,extcon-usbc-cros-ec"; google,usb-port-id = <0>; }; + + base_detection: cbas { + compatible = "google,cros-cbas"; + }; }; };
Add a 'cbas' device node for supporting table mode switch in kukui devices. Kukui platforms with detacheable base have an additional input device under cros-ec, which reports SW_TABLET_MODE regarding its base state (e.g. base flipped or detached). Signed-off-by: Ikjoon Jang <ikjn@chromium.org> --- arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++ 1 file changed, 4 insertions(+)