| Message ID | 20210519074934.20712-8-quan@os.amperecomputing.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Aspeed SSIF BMC driver | expand |
On Wed, 19 May 2021 14:49:34 +0700, Quan Nguyen wrote: > Add device tree binding document for the Aspeed SSIF BMC driver. > > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> > --- > v3: > + Switched to use DT schema format [Rob] > > .../bindings/ipmi/aspeed-ssif-bmc.yaml | 33 +++++++++++++++++++ > 1 file changed, 33 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dts:21.13-26: Warning (reg_format): /example-0/ssif-bmc@10:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: example-0: ssif-bmc@10:reg:0: [16] is too short From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml See https://patchwork.ozlabs.org/patch/1480727 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On 19/05/2021 22:29, Rob Herring wrote: > On Wed, 19 May 2021 14:49:34 +0700, Quan Nguyen wrote: >> Add device tree binding document for the Aspeed SSIF BMC driver. >> >> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> >> --- >> v3: >> + Switched to use DT schema format [Rob] >> >> .../bindings/ipmi/aspeed-ssif-bmc.yaml | 33 +++++++++++++++++++ >> 1 file changed, 33 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.yaml >> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dts:21.13-26: Warning (reg_format): /example-0/ssif-bmc@10:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) > Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.example.dt.yaml: example-0: ssif-bmc@10:reg:0: [16] is too short > From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml > > See https://patchwork.ozlabs.org/patch/1480727 > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. > Thanks, Will fix in next version. - Quan
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.yaml new file mode 100644 index 000000000000..8608041fbf7e --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ipmi/aspeed-ssif-bmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed SSIF IPMI interface + +description: SSIF IPMI device bindings for Aspeed + +maintainers: + - Thang Nguyen <thang@os.amperecomputing.com> + +properties: + compatible: + enum: + - aspeed,ast2500-ssif-bmc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + ssif-bmc@10 { + compatible = "aspeed,ast2500-ssif-bmc"; + reg = <0x10>; + };
Add device tree binding document for the Aspeed SSIF BMC driver. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> --- v3: + Switched to use DT schema format [Rob] .../bindings/ipmi/aspeed-ssif-bmc.yaml | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.yaml