diff mbox series

[1/3] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema

Message ID e8350ea542c92465020f03481d76943168df2935.1621583562.git.geert+renesas@glider.be (mailing list archive)
State New, archived
Headers show
Series pcf857x: DTS fixes and DT binding to json-schema conversion | expand

Commit Message

Geert Uytterhoeven May 21, 2021, 7:54 a.m. UTC
The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
'hog' suffix.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/dra7-evm.dts          | 2 +-
 arch/arm/boot/dts/dra71-evm.dts         | 2 +-
 arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
 arch/arm/boot/dts/dra76-evm.dts         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

Comments

Laurent Pinchart May 23, 2021, 1:54 a.m. UTC | #1
Hi Geert,

Thank you for the patch.

On Fri, May 21, 2021 at 09:54:06AM +0200, Geert Uytterhoeven wrote:
> The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
> 'hog' suffix.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  arch/arm/boot/dts/dra7-evm.dts          | 2 +-
>  arch/arm/boot/dts/dra71-evm.dts         | 2 +-
>  arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
>  arch/arm/boot/dts/dra76-evm.dts         | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 38530dbb89a00b7c..3dcb6e1f49bcf1f0 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -366,7 +366,7 @@ pcf_hdmi: gpio@26 {
>  		reg = <0x26>;
>  		gpio-controller;
>  		#gpio-cells = <2>;
> -		p1 {
> +		hdmi-audio-hog {
>  			/* vin6_sel_s0: high: VIN6, low: audio */
>  			gpio-hog;
>  			gpios = <1 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
> index 6d2cca6b44883e59..a64364443031525b 100644
> --- a/arch/arm/boot/dts/dra71-evm.dts
> +++ b/arch/arm/boot/dts/dra71-evm.dts
> @@ -187,7 +187,7 @@ &pcf_gpio_21 {
>  };
>  
>  &pcf_hdmi {
> -	p0 {
> +	hdmi-i2c-disable-hog {
>  		/*
>  		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
>  		 * With this PM_SEL(p3) should not matter
> diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
> index b65b2dd094d0ff57..f2384277d5dcdc5c 100644
> --- a/arch/arm/boot/dts/dra72-evm-common.dtsi
> +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
> @@ -268,7 +268,7 @@ pcf_hdmi: pcf8575@26 {
>  		 */
>  		lines-initial-states = <0x0f2b>;
>  
> -		p1 {
> +		hdmi-audio-hog {
>  			/* vin6_sel_s0: high: VIN6, low: audio */
>  			gpio-hog;
>  			gpios = <1 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
> index 9bd01ae40b1d1fbb..df47ea59c9c404c2 100644
> --- a/arch/arm/boot/dts/dra76-evm.dts
> +++ b/arch/arm/boot/dts/dra76-evm.dts
> @@ -381,7 +381,7 @@ pcf_hdmi: pcf8575@26 {
>  		reg = <0x26>;
>  		gpio-controller;
>  		#gpio-cells = <2>;
> -		p1 {
> +		hdmi-audio-hog {
>  			/* vin6_sel_s0: high: VIN6, low: audio */
>  			gpio-hog;
>  			gpios = <1 GPIO_ACTIVE_HIGH>;
Tony Lindgren May 27, 2021, 12:02 p.m. UTC | #2
* Geert Uytterhoeven <geert+renesas@glider.be> [210521 10:54]:
> The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
> 'hog' suffix.

Picking up this patch into omap-for-v5.14/dt thanks.

Tony
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 38530dbb89a00b7c..3dcb6e1f49bcf1f0 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -366,7 +366,7 @@  pcf_hdmi: gpio@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 6d2cca6b44883e59..a64364443031525b 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -187,7 +187,7 @@  &pcf_gpio_21 {
 };
 
 &pcf_hdmi {
-	p0 {
+	hdmi-i2c-disable-hog {
 		/*
 		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
 		 * With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index b65b2dd094d0ff57..f2384277d5dcdc5c 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -268,7 +268,7 @@  pcf_hdmi: pcf8575@26 {
 		 */
 		lines-initial-states = <0x0f2b>;
 
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 9bd01ae40b1d1fbb..df47ea59c9c404c2 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -381,7 +381,7 @@  pcf_hdmi: pcf8575@26 {
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;