| Message ID | 20210519180304.23563-3-s-anna@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Minor remoteproc cleanups | expand |
On Wed, May 19, 2021 at 01:03:04PM -0500, Suman Anna wrote: > Fix all the kernel-doc warnings in various remoteproc core files. > Some of them just needed a formatting cleanup change, while others > needed the Return statement to be added, or documenting the missed > structure elements. > > Signed-off-by: Suman Anna <s-anna@ti.com> > --- > drivers/remoteproc/remoteproc_core.c | 44 +++++++++++++------ > drivers/remoteproc/remoteproc_elf_loader.c | 12 ++++-- > drivers/remoteproc/remoteproc_virtio.c | 6 ++- > include/linux/remoteproc.h | 50 ++++++++++++---------- > 4 files changed, 69 insertions(+), 43 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 8c279039b6a3..6348aaa42bbb 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -183,12 +183,12 @@ EXPORT_SYMBOL(rproc_va_to_pa); > * translations on the internal remoteproc memory regions through a platform > * implementation specific da_to_va ops, if present. > * > - * The function returns a valid kernel address on success or NULL on failure. > - * > * Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too, > * but only on kernel direct mapped RAM memory. Instead, we're just using > * here the output of the DMA API for the carveouts, which should be more > * correct. > + * > + * Return: a valid kernel address on success or NULL on failure > */ > void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) > { > @@ -509,7 +509,7 @@ static int copy_dma_range_map(struct device *to, struct device *from) > * use RSC_DEVMEM resource entries to map their required @da to the physical > * address of their base CMA region (ouch, hacky!). > * > - * Returns 0 on success, or an appropriate error code otherwise > + * Return: 0 on success, or an appropriate error code otherwise > */ > static int rproc_handle_vdev(struct rproc *rproc, void *ptr, > int offset, int avail) > @@ -644,7 +644,7 @@ void rproc_vdev_release(struct kref *ref) > * support dynamically allocating this address using the generic > * DMA API (but currently there isn't a use case for that). > * > - * Returns 0 on success, or an appropriate error code otherwise > + * Return: 0 on success, or an appropriate error code otherwise > */ > static int rproc_handle_trace(struct rproc *rproc, void *ptr, > int offset, int avail) > @@ -721,6 +721,8 @@ static int rproc_handle_trace(struct rproc *rproc, void *ptr, > * tell us ranges of physical addresses the firmware is allowed to request, > * and not allow firmwares to request access to physical addresses that > * are outside those ranges. > + * > + * Return: 0 on success, or an appropriate error code otherwise > */ > static int rproc_handle_devmem(struct rproc *rproc, void *ptr, > int offset, int avail) > @@ -783,6 +785,8 @@ static int rproc_handle_devmem(struct rproc *rproc, void *ptr, > * > * This function allocate specified memory entry @mem using > * dma_alloc_coherent() as default allocator > + * > + * Return: 0 on success, or an appropriate error code otherwise > */ > static int rproc_alloc_carveout(struct rproc *rproc, > struct rproc_mem_entry *mem) > @@ -889,6 +893,8 @@ static int rproc_alloc_carveout(struct rproc *rproc, > * > * This function releases specified memory entry @mem allocated via > * rproc_alloc_carveout() function by @rproc. > + * > + * Return: 0 on success, or an appropriate error code otherwise > */ > static int rproc_release_carveout(struct rproc *rproc, > struct rproc_mem_entry *mem) > @@ -918,6 +924,8 @@ static int rproc_release_carveout(struct rproc *rproc, > * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries > * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB > * pressure is important; it may have a substantial impact on performance. > + * > + * Return: 0 on success, or an appropriate error code otherwise > */ > static int rproc_handle_carveout(struct rproc *rproc, > void *ptr, int offset, int avail) > @@ -1006,6 +1014,8 @@ EXPORT_SYMBOL(rproc_add_carveout); > * > * This function allocates a rproc_mem_entry struct and fill it with parameters > * provided by client. > + * > + * Return: a valid pointer on success, or NULL on failure > */ > __printf(8, 9) > struct rproc_mem_entry * > @@ -1050,6 +1060,8 @@ EXPORT_SYMBOL(rproc_mem_entry_init); > * > * This function allocates a rproc_mem_entry struct and fill it with parameters > * provided by client. > + * > + * Return: a valid pointer on success, or NULL on failure > */ > __printf(5, 6) > struct rproc_mem_entry * > @@ -1881,6 +1893,8 @@ static int __rproc_detach(struct rproc *rproc) > * remoteproc functional again. > * > * This function can sleep, so it cannot be called from atomic context. > + * > + * Return: 0 on success or a negative value upon failure > */ > int rproc_trigger_recovery(struct rproc *rproc) > { > @@ -1965,7 +1979,7 @@ static void rproc_crash_handler_work(struct work_struct *work) > * If the remote processor is already powered on, this function immediately > * returns (successfully). > * > - * Returns 0 on success, and an appropriate error value otherwise. > + * Return: 0 on success, and an appropriate error value otherwise > */ > int rproc_boot(struct rproc *rproc) > { > @@ -2100,6 +2114,8 @@ EXPORT_SYMBOL(rproc_shutdown); > * no longer available. From there it should be possible to remove the > * platform driver and even power cycle the application processor (if the HW > * supports it) without needing to switch off the remote processor. > + * > + * Return: 0 on success, and an appropriate error value otherwise > */ > int rproc_detach(struct rproc *rproc) > { > @@ -2152,7 +2168,7 @@ EXPORT_SYMBOL(rproc_detach); > * This function increments the remote processor's refcount, so always > * use rproc_put() to decrement it back once rproc isn't needed anymore. > * > - * Returns the rproc handle on success, and NULL on failure. > + * Return: rproc handle on success, and NULL on failure > */ > #ifdef CONFIG_OF > struct rproc *rproc_get_by_phandle(phandle phandle) > @@ -2302,8 +2318,6 @@ static int rproc_validate(struct rproc *rproc) > * This is called by the platform-specific rproc implementation, whenever > * a new remote processor device is probed. > * > - * Returns 0 on success and an appropriate error code otherwise. > - * > * Note: this function initiates an asynchronous firmware loading > * context, which will look for virtio devices supported by the rproc's > * firmware. > @@ -2311,6 +2325,8 @@ static int rproc_validate(struct rproc *rproc) > * If found, those virtio devices will be created and added, so as a result > * of registering this remote processor, additional virtio drivers might be > * probed. > + * > + * Return: 0 on success and an appropriate error code otherwise > */ > int rproc_add(struct rproc *rproc) > { > @@ -2364,7 +2380,7 @@ static void devm_rproc_remove(void *rproc) > * This function performs like rproc_add() but the registered rproc device will > * automatically be removed on driver detach. > * > - * Returns: 0 on success, negative errno on failure > + * Return: 0 on success, negative errno on failure > */ > int devm_rproc_add(struct device *dev, struct rproc *rproc) > { > @@ -2472,10 +2488,10 @@ static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops) > * implementations should then call rproc_add() to complete > * the registration of the remote processor. > * > - * On success the new rproc is returned, and on failure, NULL. > - * > * Note: _never_ directly deallocate @rproc, even if it was not registered > * yet. Instead, when you need to unroll rproc_alloc(), use rproc_free(). > + * > + * Return: new rproc pointer on success, and NULL on failure > */ > struct rproc *rproc_alloc(struct device *dev, const char *name, > const struct rproc_ops *ops, > @@ -2588,7 +2604,7 @@ EXPORT_SYMBOL(rproc_put); > * of the outstanding reference created by rproc_alloc. To decrement that > * one last refcount, one still needs to call rproc_free(). > * > - * Returns 0 on success and -EINVAL if @rproc isn't valid. > + * Return: 0 on success and -EINVAL if @rproc isn't valid > */ > int rproc_del(struct rproc *rproc) > { > @@ -2635,7 +2651,7 @@ static void devm_rproc_free(struct device *dev, void *res) > * This function performs like rproc_alloc() but the acquired rproc device will > * automatically be released on driver detach. > * > - * Returns: new rproc instance, or NULL on failure > + * Return: new rproc instance, or NULL on failure > */ > struct rproc *devm_rproc_alloc(struct device *dev, const char *name, > const struct rproc_ops *ops, > @@ -2687,7 +2703,7 @@ EXPORT_SYMBOL(rproc_remove_subdev); > * rproc_get_by_child() - acquire rproc handle of @dev's ancestor > * @dev: child device to find ancestor of > * > - * Returns the ancestor rproc instance, or NULL if not found. > + * Return: the ancestor rproc instance, or NULL if not found > */ > struct rproc *rproc_get_by_child(struct device *dev) > { > diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c > index 11423588965a..469c52e62faf 100644 > --- a/drivers/remoteproc/remoteproc_elf_loader.c > +++ b/drivers/remoteproc/remoteproc_elf_loader.c > @@ -31,6 +31,8 @@ > * @fw: the ELF firmware image > * > * Make sure this fw image is sane (ie a correct ELF32/ELF64 file). > + * > + * Return: 0 on success and -EINVAL upon any failure > */ > int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw) > { > @@ -117,11 +119,11 @@ EXPORT_SYMBOL(rproc_elf_sanity_check); > * @rproc: the remote processor handle > * @fw: the ELF firmware image > * > - * This function returns the entry point address of the ELF > - * image. > - * > * Note that the boot address is not a configurable property of all remote > * processors. Some will always boot at a specific hard-coded address. > + * > + * Return: entry point address of the ELF image > + * > */ > u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) > { > @@ -152,6 +154,8 @@ EXPORT_SYMBOL(rproc_elf_get_boot_addr); > * might be different: they might not have iommus, and would prefer to > * directly allocate memory for every segment/resource. This is not yet > * supported, though. > + * > + * Return: 0 on success and an appropriate error code otherwise > */ > int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw) > { > @@ -362,7 +366,7 @@ EXPORT_SYMBOL(rproc_elf_load_rsc_table); > * This function finds the location of the loaded resource table. Don't > * call this function if the table wasn't loaded yet - it's a bug if you do. > * > - * Returns the pointer to the resource table if it is found or NULL otherwise. > + * Return: pointer to the resource table if it is found or NULL otherwise. Here the '.' has been kept while it was remove for all of the above. I don't know that the right guidelines are for this. > * If the table wasn't loaded yet the result is unspecified. > */ > struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc, > diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c > index 0cc617f76068..cf4d54e98e6a 100644 > --- a/drivers/remoteproc/remoteproc_virtio.c > +++ b/drivers/remoteproc/remoteproc_virtio.c > @@ -45,7 +45,7 @@ static bool rproc_virtio_notify(struct virtqueue *vq) > * when the remote processor signals that a specific virtqueue has pending > * messages available. > * > - * Returns IRQ_NONE if no message was found in the @notifyid virtqueue, > + * Return: IRQ_NONE if no message was found in the @notifyid virtqueue, > * and otherwise returns IRQ_HANDLED. Same > */ > irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int notifyid) > @@ -325,7 +325,7 @@ static void rproc_virtio_dev_release(struct device *dev) > * This function registers a virtio device. This vdev's partent is > * the rproc device. > * > - * Returns 0 on success or an appropriate error value otherwise. > + * Return: 0 on success or an appropriate error value otherwise > */ > int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) > { > @@ -432,6 +432,8 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) > * @data: must be null > * > * This function unregisters an existing virtio device. > + * > + * Return: 0 > */ > int rproc_remove_virtio_dev(struct device *dev, void *data) > { > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h > index 8b795b544f75..42a1f30e33a7 100644 > --- a/include/linux/remoteproc.h > +++ b/include/linux/remoteproc.h > @@ -243,7 +243,7 @@ struct fw_rsc_trace { > * @da: device address > * @align: the alignment between the consumer and producer parts of the vring > * @num: num of buffers supported by this vring (must be power of two) > - * @notifyid is a unique rproc-wide notify index for this vring. This notify > + * @notifyid: a unique rproc-wide notify index for this vring. This notify > * index is used when kicking a remote processor, to let it know that this > * vring is triggered. > * @pa: physical address > @@ -266,18 +266,18 @@ struct fw_rsc_vdev_vring { > /** > * struct fw_rsc_vdev - virtio device header > * @id: virtio device id (as in virtio_ids.h) > - * @notifyid is a unique rproc-wide notify index for this vdev. This notify > + * @notifyid: a unique rproc-wide notify index for this vdev. This notify > * index is used when kicking a remote processor, to let it know that the > * status/features of this vdev have changes. > - * @dfeatures specifies the virtio device features supported by the firmware > - * @gfeatures is a place holder used by the host to write back the > + * @dfeatures: specifies the virtio device features supported by the firmware > + * @gfeatures: a place holder used by the host to write back the > * negotiated features that are supported by both sides. > - * @config_len is the size of the virtio config space of this vdev. The config > + * @config_len: the size of the virtio config space of this vdev. The config > * space lies in the resource table immediate after this vdev header. > - * @status is a place holder where the host will indicate its virtio progress. > - * @num_of_vrings indicates how many vrings are described in this vdev header > + * @status: a place holder where the host will indicate its virtio progress. > + * @num_of_vrings: indicates how many vrings are described in this vdev header > * @reserved: reserved (must be zero) > - * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. > + * @vring: an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. > * > * This resource is a virtio device header: it provides information about > * the vdev, and is then used by the host and its peer remote processors > @@ -287,16 +287,17 @@ struct fw_rsc_vdev_vring { > * to statically allocate a vdev upon registration of the rproc (dynamic vdev > * allocation is not yet supported). > * > - * Note: unlike virtualization systems, the term 'host' here means > - * the Linux side which is running remoteproc to control the remote > - * processors. We use the name 'gfeatures' to comply with virtio's terms, > - * though there isn't really any virtualized guest OS here: it's the host > - * which is responsible for negotiating the final features. > - * Yeah, it's a bit confusing. > - * > - * Note: immediately following this structure is the virtio config space for > - * this vdev (which is specific to the vdev; for more info, read the virtio > - * spec). the size of the config space is specified by @config_len. > + * Note: > + * 1. unlike virtualization systems, the term 'host' here means > + * the Linux side which is running remoteproc to control the remote > + * processors. We use the name 'gfeatures' to comply with virtio's terms, > + * though there isn't really any virtualized guest OS here: it's the host > + * which is responsible for negotiating the final features. > + * Yeah, it's a bit confusing. > + * > + * 2. immediately following this structure is the virtio config space for > + * this vdev (which is specific to the vdev; for more info, read the virtio > + * spec). the size of the config space is specified by @config_len. s/the/The > */ > struct fw_rsc_vdev { > u32 id; > @@ -440,7 +441,7 @@ enum rproc_state { > * enum rproc_crash_type - remote processor crash types > * @RPROC_MMUFAULT: iommu fault > * @RPROC_WATCHDOG: watchdog bite > - * @RPROC_FATAL_ERROR fatal error > + * @RPROC_FATAL_ERROR: fatal error > * > * Each element of the enum is used as an array index. So that, the value of > * the elements should be always something sane. > @@ -457,9 +458,9 @@ enum rproc_crash_type { > * enum rproc_dump_mechanism - Coredump options for core > * @RPROC_COREDUMP_DISABLED: Don't perform any dump > * @RPROC_COREDUMP_ENABLED: Copy dump to separate buffer and carry on with > - recovery > + * recovery > * @RPROC_COREDUMP_INLINE: Read segments directly from device memory. Stall > - recovery until all segments are read > + * recovery until all segments are read > */ > enum rproc_dump_mechanism { > RPROC_COREDUMP_DISABLED, > @@ -475,6 +476,7 @@ enum rproc_dump_mechanism { > * @priv: private data associated with the dump_segment > * @dump: custom dump function to fill device memory segment associated > * with coredump > + * @offset: offset of the segment > */ > struct rproc_dump_segment { > struct list_head node; > @@ -524,7 +526,9 @@ struct rproc_dump_segment { > * @auto_boot: flag to indicate if remote processor should be auto-started > * @dump_segments: list of segments in the firmware > * @nb_vdev: number of vdev currently handled by rproc > - * @char_dev: character device of the rproc > + * @elf_class: firmware ELF class > + * @elf_machine: firmware ELF machine > + * @cdev: character device of the rproc > * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release > */ > struct rproc { > @@ -613,10 +617,10 @@ struct rproc_vring { > * struct rproc_vdev - remoteproc state for a supported virtio device > * @refcount: reference counter for the vdev and vring allocations > * @subdev: handle for registering the vdev as a rproc subdevice > + * @dev: device struct used for reference count semantics > * @id: virtio device id (as in virtio_ids.h) > * @node: list node > * @rproc: the rproc handle > - * @vdev: the virio device > * @vring: the vrings for this vdev > * @rsc_offset: offset of the vdev's resource entry > * @index: vdev position versus other vdev declared in resource table With or without the above: Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > -- > 2.30.1 >
On 5/25/21 1:00 PM, Mathieu Poirier wrote: > On Wed, May 19, 2021 at 01:03:04PM -0500, Suman Anna wrote: >> Fix all the kernel-doc warnings in various remoteproc core files. >> Some of them just needed a formatting cleanup change, while others >> needed the Return statement to be added, or documenting the missed >> structure elements. >> >> Signed-off-by: Suman Anna <s-anna@ti.com> >> --- >> drivers/remoteproc/remoteproc_core.c | 44 +++++++++++++------ >> drivers/remoteproc/remoteproc_elf_loader.c | 12 ++++-- >> drivers/remoteproc/remoteproc_virtio.c | 6 ++- >> include/linux/remoteproc.h | 50 ++++++++++++---------- >> 4 files changed, 69 insertions(+), 43 deletions(-) >> >> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c >> index 8c279039b6a3..6348aaa42bbb 100644 >> --- a/drivers/remoteproc/remoteproc_core.c >> +++ b/drivers/remoteproc/remoteproc_core.c >> @@ -183,12 +183,12 @@ EXPORT_SYMBOL(rproc_va_to_pa); >> * translations on the internal remoteproc memory regions through a platform >> * implementation specific da_to_va ops, if present. >> * >> - * The function returns a valid kernel address on success or NULL on failure. >> - * >> * Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too, >> * but only on kernel direct mapped RAM memory. Instead, we're just using >> * here the output of the DMA API for the carveouts, which should be more >> * correct. >> + * >> + * Return: a valid kernel address on success or NULL on failure >> */ >> void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) >> { >> @@ -509,7 +509,7 @@ static int copy_dma_range_map(struct device *to, struct device *from) >> * use RSC_DEVMEM resource entries to map their required @da to the physical >> * address of their base CMA region (ouch, hacky!). >> * >> - * Returns 0 on success, or an appropriate error code otherwise >> + * Return: 0 on success, or an appropriate error code otherwise >> */ >> static int rproc_handle_vdev(struct rproc *rproc, void *ptr, >> int offset, int avail) >> @@ -644,7 +644,7 @@ void rproc_vdev_release(struct kref *ref) >> * support dynamically allocating this address using the generic >> * DMA API (but currently there isn't a use case for that). >> * >> - * Returns 0 on success, or an appropriate error code otherwise >> + * Return: 0 on success, or an appropriate error code otherwise >> */ >> static int rproc_handle_trace(struct rproc *rproc, void *ptr, >> int offset, int avail) >> @@ -721,6 +721,8 @@ static int rproc_handle_trace(struct rproc *rproc, void *ptr, >> * tell us ranges of physical addresses the firmware is allowed to request, >> * and not allow firmwares to request access to physical addresses that >> * are outside those ranges. >> + * >> + * Return: 0 on success, or an appropriate error code otherwise >> */ >> static int rproc_handle_devmem(struct rproc *rproc, void *ptr, >> int offset, int avail) >> @@ -783,6 +785,8 @@ static int rproc_handle_devmem(struct rproc *rproc, void *ptr, >> * >> * This function allocate specified memory entry @mem using >> * dma_alloc_coherent() as default allocator >> + * >> + * Return: 0 on success, or an appropriate error code otherwise >> */ >> static int rproc_alloc_carveout(struct rproc *rproc, >> struct rproc_mem_entry *mem) >> @@ -889,6 +893,8 @@ static int rproc_alloc_carveout(struct rproc *rproc, >> * >> * This function releases specified memory entry @mem allocated via >> * rproc_alloc_carveout() function by @rproc. >> + * >> + * Return: 0 on success, or an appropriate error code otherwise >> */ >> static int rproc_release_carveout(struct rproc *rproc, >> struct rproc_mem_entry *mem) >> @@ -918,6 +924,8 @@ static int rproc_release_carveout(struct rproc *rproc, >> * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries >> * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB >> * pressure is important; it may have a substantial impact on performance. >> + * >> + * Return: 0 on success, or an appropriate error code otherwise >> */ >> static int rproc_handle_carveout(struct rproc *rproc, >> void *ptr, int offset, int avail) >> @@ -1006,6 +1014,8 @@ EXPORT_SYMBOL(rproc_add_carveout); >> * >> * This function allocates a rproc_mem_entry struct and fill it with parameters >> * provided by client. >> + * >> + * Return: a valid pointer on success, or NULL on failure >> */ >> __printf(8, 9) >> struct rproc_mem_entry * >> @@ -1050,6 +1060,8 @@ EXPORT_SYMBOL(rproc_mem_entry_init); >> * >> * This function allocates a rproc_mem_entry struct and fill it with parameters >> * provided by client. >> + * >> + * Return: a valid pointer on success, or NULL on failure >> */ >> __printf(5, 6) >> struct rproc_mem_entry * >> @@ -1881,6 +1893,8 @@ static int __rproc_detach(struct rproc *rproc) >> * remoteproc functional again. >> * >> * This function can sleep, so it cannot be called from atomic context. >> + * >> + * Return: 0 on success or a negative value upon failure >> */ >> int rproc_trigger_recovery(struct rproc *rproc) >> { >> @@ -1965,7 +1979,7 @@ static void rproc_crash_handler_work(struct work_struct *work) >> * If the remote processor is already powered on, this function immediately >> * returns (successfully). >> * >> - * Returns 0 on success, and an appropriate error value otherwise. >> + * Return: 0 on success, and an appropriate error value otherwise >> */ >> int rproc_boot(struct rproc *rproc) >> { >> @@ -2100,6 +2114,8 @@ EXPORT_SYMBOL(rproc_shutdown); >> * no longer available. From there it should be possible to remove the >> * platform driver and even power cycle the application processor (if the HW >> * supports it) without needing to switch off the remote processor. >> + * >> + * Return: 0 on success, and an appropriate error value otherwise >> */ >> int rproc_detach(struct rproc *rproc) >> { >> @@ -2152,7 +2168,7 @@ EXPORT_SYMBOL(rproc_detach); >> * This function increments the remote processor's refcount, so always >> * use rproc_put() to decrement it back once rproc isn't needed anymore. >> * >> - * Returns the rproc handle on success, and NULL on failure. >> + * Return: rproc handle on success, and NULL on failure >> */ >> #ifdef CONFIG_OF >> struct rproc *rproc_get_by_phandle(phandle phandle) >> @@ -2302,8 +2318,6 @@ static int rproc_validate(struct rproc *rproc) >> * This is called by the platform-specific rproc implementation, whenever >> * a new remote processor device is probed. >> * >> - * Returns 0 on success and an appropriate error code otherwise. >> - * >> * Note: this function initiates an asynchronous firmware loading >> * context, which will look for virtio devices supported by the rproc's >> * firmware. >> @@ -2311,6 +2325,8 @@ static int rproc_validate(struct rproc *rproc) >> * If found, those virtio devices will be created and added, so as a result >> * of registering this remote processor, additional virtio drivers might be >> * probed. >> + * >> + * Return: 0 on success and an appropriate error code otherwise >> */ >> int rproc_add(struct rproc *rproc) >> { >> @@ -2364,7 +2380,7 @@ static void devm_rproc_remove(void *rproc) >> * This function performs like rproc_add() but the registered rproc device will >> * automatically be removed on driver detach. >> * >> - * Returns: 0 on success, negative errno on failure >> + * Return: 0 on success, negative errno on failure >> */ >> int devm_rproc_add(struct device *dev, struct rproc *rproc) >> { >> @@ -2472,10 +2488,10 @@ static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops) >> * implementations should then call rproc_add() to complete >> * the registration of the remote processor. >> * >> - * On success the new rproc is returned, and on failure, NULL. >> - * >> * Note: _never_ directly deallocate @rproc, even if it was not registered >> * yet. Instead, when you need to unroll rproc_alloc(), use rproc_free(). >> + * >> + * Return: new rproc pointer on success, and NULL on failure >> */ >> struct rproc *rproc_alloc(struct device *dev, const char *name, >> const struct rproc_ops *ops, >> @@ -2588,7 +2604,7 @@ EXPORT_SYMBOL(rproc_put); >> * of the outstanding reference created by rproc_alloc. To decrement that >> * one last refcount, one still needs to call rproc_free(). >> * >> - * Returns 0 on success and -EINVAL if @rproc isn't valid. >> + * Return: 0 on success and -EINVAL if @rproc isn't valid >> */ >> int rproc_del(struct rproc *rproc) >> { >> @@ -2635,7 +2651,7 @@ static void devm_rproc_free(struct device *dev, void *res) >> * This function performs like rproc_alloc() but the acquired rproc device will >> * automatically be released on driver detach. >> * >> - * Returns: new rproc instance, or NULL on failure >> + * Return: new rproc instance, or NULL on failure >> */ >> struct rproc *devm_rproc_alloc(struct device *dev, const char *name, >> const struct rproc_ops *ops, >> @@ -2687,7 +2703,7 @@ EXPORT_SYMBOL(rproc_remove_subdev); >> * rproc_get_by_child() - acquire rproc handle of @dev's ancestor >> * @dev: child device to find ancestor of >> * >> - * Returns the ancestor rproc instance, or NULL if not found. >> + * Return: the ancestor rproc instance, or NULL if not found >> */ >> struct rproc *rproc_get_by_child(struct device *dev) >> { >> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c >> index 11423588965a..469c52e62faf 100644 >> --- a/drivers/remoteproc/remoteproc_elf_loader.c >> +++ b/drivers/remoteproc/remoteproc_elf_loader.c >> @@ -31,6 +31,8 @@ >> * @fw: the ELF firmware image >> * >> * Make sure this fw image is sane (ie a correct ELF32/ELF64 file). >> + * >> + * Return: 0 on success and -EINVAL upon any failure >> */ >> int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw) >> { >> @@ -117,11 +119,11 @@ EXPORT_SYMBOL(rproc_elf_sanity_check); >> * @rproc: the remote processor handle >> * @fw: the ELF firmware image >> * >> - * This function returns the entry point address of the ELF >> - * image. >> - * >> * Note that the boot address is not a configurable property of all remote >> * processors. Some will always boot at a specific hard-coded address. >> + * >> + * Return: entry point address of the ELF image >> + * >> */ >> u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) >> { >> @@ -152,6 +154,8 @@ EXPORT_SYMBOL(rproc_elf_get_boot_addr); >> * might be different: they might not have iommus, and would prefer to >> * directly allocate memory for every segment/resource. This is not yet >> * supported, though. >> + * >> + * Return: 0 on success and an appropriate error code otherwise >> */ >> int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw) >> { >> @@ -362,7 +366,7 @@ EXPORT_SYMBOL(rproc_elf_load_rsc_table); >> * This function finds the location of the loaded resource table. Don't >> * call this function if the table wasn't loaded yet - it's a bug if you do. >> * >> - * Returns the pointer to the resource table if it is found or NULL otherwise. >> + * Return: pointer to the resource table if it is found or NULL otherwise. > > Here the '.' has been kept while it was remove for all of the above. I don't > know that the right guidelines are for this. > >> * If the table wasn't loaded yet the result is unspecified. >> */ >> struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc, >> diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c >> index 0cc617f76068..cf4d54e98e6a 100644 >> --- a/drivers/remoteproc/remoteproc_virtio.c >> +++ b/drivers/remoteproc/remoteproc_virtio.c >> @@ -45,7 +45,7 @@ static bool rproc_virtio_notify(struct virtqueue *vq) >> * when the remote processor signals that a specific virtqueue has pending >> * messages available. >> * >> - * Returns IRQ_NONE if no message was found in the @notifyid virtqueue, >> + * Return: IRQ_NONE if no message was found in the @notifyid virtqueue, >> * and otherwise returns IRQ_HANDLED. > > Same > >> */ >> irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int notifyid) >> @@ -325,7 +325,7 @@ static void rproc_virtio_dev_release(struct device *dev) >> * This function registers a virtio device. This vdev's partent is >> * the rproc device. >> * >> - * Returns 0 on success or an appropriate error value otherwise. >> + * Return: 0 on success or an appropriate error value otherwise >> */ >> int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) >> { >> @@ -432,6 +432,8 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) >> * @data: must be null >> * >> * This function unregisters an existing virtio device. >> + * >> + * Return: 0 >> */ >> int rproc_remove_virtio_dev(struct device *dev, void *data) >> { >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h >> index 8b795b544f75..42a1f30e33a7 100644 >> --- a/include/linux/remoteproc.h >> +++ b/include/linux/remoteproc.h >> @@ -243,7 +243,7 @@ struct fw_rsc_trace { >> * @da: device address >> * @align: the alignment between the consumer and producer parts of the vring >> * @num: num of buffers supported by this vring (must be power of two) >> - * @notifyid is a unique rproc-wide notify index for this vring. This notify >> + * @notifyid: a unique rproc-wide notify index for this vring. This notify >> * index is used when kicking a remote processor, to let it know that this >> * vring is triggered. >> * @pa: physical address >> @@ -266,18 +266,18 @@ struct fw_rsc_vdev_vring { >> /** >> * struct fw_rsc_vdev - virtio device header >> * @id: virtio device id (as in virtio_ids.h) >> - * @notifyid is a unique rproc-wide notify index for this vdev. This notify >> + * @notifyid: a unique rproc-wide notify index for this vdev. This notify >> * index is used when kicking a remote processor, to let it know that the >> * status/features of this vdev have changes. >> - * @dfeatures specifies the virtio device features supported by the firmware >> - * @gfeatures is a place holder used by the host to write back the >> + * @dfeatures: specifies the virtio device features supported by the firmware >> + * @gfeatures: a place holder used by the host to write back the >> * negotiated features that are supported by both sides. >> - * @config_len is the size of the virtio config space of this vdev. The config >> + * @config_len: the size of the virtio config space of this vdev. The config >> * space lies in the resource table immediate after this vdev header. >> - * @status is a place holder where the host will indicate its virtio progress. >> - * @num_of_vrings indicates how many vrings are described in this vdev header >> + * @status: a place holder where the host will indicate its virtio progress. >> + * @num_of_vrings: indicates how many vrings are described in this vdev header >> * @reserved: reserved (must be zero) >> - * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. >> + * @vring: an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. >> * >> * This resource is a virtio device header: it provides information about >> * the vdev, and is then used by the host and its peer remote processors >> @@ -287,16 +287,17 @@ struct fw_rsc_vdev_vring { >> * to statically allocate a vdev upon registration of the rproc (dynamic vdev >> * allocation is not yet supported). >> * >> - * Note: unlike virtualization systems, the term 'host' here means >> - * the Linux side which is running remoteproc to control the remote >> - * processors. We use the name 'gfeatures' to comply with virtio's terms, >> - * though there isn't really any virtualized guest OS here: it's the host >> - * which is responsible for negotiating the final features. >> - * Yeah, it's a bit confusing. >> - * >> - * Note: immediately following this structure is the virtio config space for >> - * this vdev (which is specific to the vdev; for more info, read the virtio >> - * spec). the size of the config space is specified by @config_len. >> + * Note: >> + * 1. unlike virtualization systems, the term 'host' here means >> + * the Linux side which is running remoteproc to control the remote >> + * processors. We use the name 'gfeatures' to comply with virtio's terms, >> + * though there isn't really any virtualized guest OS here: it's the host >> + * which is responsible for negotiating the final features. >> + * Yeah, it's a bit confusing. >> + * >> + * 2. immediately following this structure is the virtio config space for >> + * this vdev (which is specific to the vdev; for more info, read the virtio >> + * spec). the size of the config space is specified by @config_len. > > s/the/The > >> */ >> struct fw_rsc_vdev { >> u32 id; >> @@ -440,7 +441,7 @@ enum rproc_state { >> * enum rproc_crash_type - remote processor crash types >> * @RPROC_MMUFAULT: iommu fault >> * @RPROC_WATCHDOG: watchdog bite >> - * @RPROC_FATAL_ERROR fatal error >> + * @RPROC_FATAL_ERROR: fatal error >> * >> * Each element of the enum is used as an array index. So that, the value of >> * the elements should be always something sane. >> @@ -457,9 +458,9 @@ enum rproc_crash_type { >> * enum rproc_dump_mechanism - Coredump options for core >> * @RPROC_COREDUMP_DISABLED: Don't perform any dump >> * @RPROC_COREDUMP_ENABLED: Copy dump to separate buffer and carry on with >> - recovery >> + * recovery >> * @RPROC_COREDUMP_INLINE: Read segments directly from device memory. Stall >> - recovery until all segments are read >> + * recovery until all segments are read >> */ >> enum rproc_dump_mechanism { >> RPROC_COREDUMP_DISABLED, >> @@ -475,6 +476,7 @@ enum rproc_dump_mechanism { >> * @priv: private data associated with the dump_segment >> * @dump: custom dump function to fill device memory segment associated >> * with coredump >> + * @offset: offset of the segment >> */ >> struct rproc_dump_segment { >> struct list_head node; >> @@ -524,7 +526,9 @@ struct rproc_dump_segment { >> * @auto_boot: flag to indicate if remote processor should be auto-started >> * @dump_segments: list of segments in the firmware >> * @nb_vdev: number of vdev currently handled by rproc >> - * @char_dev: character device of the rproc >> + * @elf_class: firmware ELF class >> + * @elf_machine: firmware ELF machine >> + * @cdev: character device of the rproc >> * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release >> */ >> struct rproc { >> @@ -613,10 +617,10 @@ struct rproc_vring { >> * struct rproc_vdev - remoteproc state for a supported virtio device >> * @refcount: reference counter for the vdev and vring allocations >> * @subdev: handle for registering the vdev as a rproc subdevice >> + * @dev: device struct used for reference count semantics >> * @id: virtio device id (as in virtio_ids.h) >> * @node: list node >> * @rproc: the rproc handle >> - * @vdev: the virio device >> * @vring: the vrings for this vdev >> * @rsc_offset: offset of the vdev's resource entry >> * @index: vdev position versus other vdev declared in resource table > > With or without the above: > > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Thanks Mathieu. Bjorn, Any preferences, let me know if you want me to quickly respin this patch, or if you want to fixup locally while applying? regards Suman
On Tue 25 May 13:00 CDT 2021, Mathieu Poirier wrote: > On Wed, May 19, 2021 at 01:03:04PM -0500, Suman Anna wrote: > > diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c [..] > > @@ -362,7 +366,7 @@ EXPORT_SYMBOL(rproc_elf_load_rsc_table); > > * This function finds the location of the loaded resource table. Don't > > * call this function if the table wasn't loaded yet - it's a bug if you do. > > * > > - * Returns the pointer to the resource table if it is found or NULL otherwise. > > + * Return: pointer to the resource table if it is found or NULL otherwise. > > Here the '.' has been kept while it was remove for all of the above. I don't > know that the right guidelines are for this. > Reviewing https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html I don't see that this is defined. So I'm fine with whatever looks good. That said, the section about "Return values" shows that the "Return: ..." line should be short and concise and if needed followed by a newline and then a longer paragraph. I'll fix the capitalization of "the" below and apply this as is and we can go back an reformat these multiline Return entries later... > > * If the table wasn't loaded yet the result is unspecified. > > */ [..] > > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h [..] > > + * 2. immediately following this structure is the virtio config space for > > + * this vdev (which is specific to the vdev; for more info, read the virtio > > + * spec). the size of the config space is specified by @config_len. > > s/the/The > [..] > > struct rproc { > > @@ -613,10 +617,10 @@ struct rproc_vring { > > * struct rproc_vdev - remoteproc state for a supported virtio device > > * @refcount: reference counter for the vdev and vring allocations > > * @subdev: handle for registering the vdev as a rproc subdevice > > + * @dev: device struct used for reference count semantics > > * @id: virtio device id (as in virtio_ids.h) > > * @node: list node > > * @rproc: the rproc handle > > - * @vdev: the virio device > > * @vring: the vrings for this vdev > > * @rsc_offset: offset of the vdev's resource entry > > * @index: vdev position versus other vdev declared in resource table > > With or without the above: > > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > Thanks Mathieu, and thanks Suman. Regards, Bjorn
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 8c279039b6a3..6348aaa42bbb 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -183,12 +183,12 @@ EXPORT_SYMBOL(rproc_va_to_pa); * translations on the internal remoteproc memory regions through a platform * implementation specific da_to_va ops, if present. * - * The function returns a valid kernel address on success or NULL on failure. - * * Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too, * but only on kernel direct mapped RAM memory. Instead, we're just using * here the output of the DMA API for the carveouts, which should be more * correct. + * + * Return: a valid kernel address on success or NULL on failure */ void *rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) { @@ -509,7 +509,7 @@ static int copy_dma_range_map(struct device *to, struct device *from) * use RSC_DEVMEM resource entries to map their required @da to the physical * address of their base CMA region (ouch, hacky!). * - * Returns 0 on success, or an appropriate error code otherwise + * Return: 0 on success, or an appropriate error code otherwise */ static int rproc_handle_vdev(struct rproc *rproc, void *ptr, int offset, int avail) @@ -644,7 +644,7 @@ void rproc_vdev_release(struct kref *ref) * support dynamically allocating this address using the generic * DMA API (but currently there isn't a use case for that). * - * Returns 0 on success, or an appropriate error code otherwise + * Return: 0 on success, or an appropriate error code otherwise */ static int rproc_handle_trace(struct rproc *rproc, void *ptr, int offset, int avail) @@ -721,6 +721,8 @@ static int rproc_handle_trace(struct rproc *rproc, void *ptr, * tell us ranges of physical addresses the firmware is allowed to request, * and not allow firmwares to request access to physical addresses that * are outside those ranges. + * + * Return: 0 on success, or an appropriate error code otherwise */ static int rproc_handle_devmem(struct rproc *rproc, void *ptr, int offset, int avail) @@ -783,6 +785,8 @@ static int rproc_handle_devmem(struct rproc *rproc, void *ptr, * * This function allocate specified memory entry @mem using * dma_alloc_coherent() as default allocator + * + * Return: 0 on success, or an appropriate error code otherwise */ static int rproc_alloc_carveout(struct rproc *rproc, struct rproc_mem_entry *mem) @@ -889,6 +893,8 @@ static int rproc_alloc_carveout(struct rproc *rproc, * * This function releases specified memory entry @mem allocated via * rproc_alloc_carveout() function by @rproc. + * + * Return: 0 on success, or an appropriate error code otherwise */ static int rproc_release_carveout(struct rproc *rproc, struct rproc_mem_entry *mem) @@ -918,6 +924,8 @@ static int rproc_release_carveout(struct rproc *rproc, * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB * pressure is important; it may have a substantial impact on performance. + * + * Return: 0 on success, or an appropriate error code otherwise */ static int rproc_handle_carveout(struct rproc *rproc, void *ptr, int offset, int avail) @@ -1006,6 +1014,8 @@ EXPORT_SYMBOL(rproc_add_carveout); * * This function allocates a rproc_mem_entry struct and fill it with parameters * provided by client. + * + * Return: a valid pointer on success, or NULL on failure */ __printf(8, 9) struct rproc_mem_entry * @@ -1050,6 +1060,8 @@ EXPORT_SYMBOL(rproc_mem_entry_init); * * This function allocates a rproc_mem_entry struct and fill it with parameters * provided by client. + * + * Return: a valid pointer on success, or NULL on failure */ __printf(5, 6) struct rproc_mem_entry * @@ -1881,6 +1893,8 @@ static int __rproc_detach(struct rproc *rproc) * remoteproc functional again. * * This function can sleep, so it cannot be called from atomic context. + * + * Return: 0 on success or a negative value upon failure */ int rproc_trigger_recovery(struct rproc *rproc) { @@ -1965,7 +1979,7 @@ static void rproc_crash_handler_work(struct work_struct *work) * If the remote processor is already powered on, this function immediately * returns (successfully). * - * Returns 0 on success, and an appropriate error value otherwise. + * Return: 0 on success, and an appropriate error value otherwise */ int rproc_boot(struct rproc *rproc) { @@ -2100,6 +2114,8 @@ EXPORT_SYMBOL(rproc_shutdown); * no longer available. From there it should be possible to remove the * platform driver and even power cycle the application processor (if the HW * supports it) without needing to switch off the remote processor. + * + * Return: 0 on success, and an appropriate error value otherwise */ int rproc_detach(struct rproc *rproc) { @@ -2152,7 +2168,7 @@ EXPORT_SYMBOL(rproc_detach); * This function increments the remote processor's refcount, so always * use rproc_put() to decrement it back once rproc isn't needed anymore. * - * Returns the rproc handle on success, and NULL on failure. + * Return: rproc handle on success, and NULL on failure */ #ifdef CONFIG_OF struct rproc *rproc_get_by_phandle(phandle phandle) @@ -2302,8 +2318,6 @@ static int rproc_validate(struct rproc *rproc) * This is called by the platform-specific rproc implementation, whenever * a new remote processor device is probed. * - * Returns 0 on success and an appropriate error code otherwise. - * * Note: this function initiates an asynchronous firmware loading * context, which will look for virtio devices supported by the rproc's * firmware. @@ -2311,6 +2325,8 @@ static int rproc_validate(struct rproc *rproc) * If found, those virtio devices will be created and added, so as a result * of registering this remote processor, additional virtio drivers might be * probed. + * + * Return: 0 on success and an appropriate error code otherwise */ int rproc_add(struct rproc *rproc) { @@ -2364,7 +2380,7 @@ static void devm_rproc_remove(void *rproc) * This function performs like rproc_add() but the registered rproc device will * automatically be removed on driver detach. * - * Returns: 0 on success, negative errno on failure + * Return: 0 on success, negative errno on failure */ int devm_rproc_add(struct device *dev, struct rproc *rproc) { @@ -2472,10 +2488,10 @@ static int rproc_alloc_ops(struct rproc *rproc, const struct rproc_ops *ops) * implementations should then call rproc_add() to complete * the registration of the remote processor. * - * On success the new rproc is returned, and on failure, NULL. - * * Note: _never_ directly deallocate @rproc, even if it was not registered * yet. Instead, when you need to unroll rproc_alloc(), use rproc_free(). + * + * Return: new rproc pointer on success, and NULL on failure */ struct rproc *rproc_alloc(struct device *dev, const char *name, const struct rproc_ops *ops, @@ -2588,7 +2604,7 @@ EXPORT_SYMBOL(rproc_put); * of the outstanding reference created by rproc_alloc. To decrement that * one last refcount, one still needs to call rproc_free(). * - * Returns 0 on success and -EINVAL if @rproc isn't valid. + * Return: 0 on success and -EINVAL if @rproc isn't valid */ int rproc_del(struct rproc *rproc) { @@ -2635,7 +2651,7 @@ static void devm_rproc_free(struct device *dev, void *res) * This function performs like rproc_alloc() but the acquired rproc device will * automatically be released on driver detach. * - * Returns: new rproc instance, or NULL on failure + * Return: new rproc instance, or NULL on failure */ struct rproc *devm_rproc_alloc(struct device *dev, const char *name, const struct rproc_ops *ops, @@ -2687,7 +2703,7 @@ EXPORT_SYMBOL(rproc_remove_subdev); * rproc_get_by_child() - acquire rproc handle of @dev's ancestor * @dev: child device to find ancestor of * - * Returns the ancestor rproc instance, or NULL if not found. + * Return: the ancestor rproc instance, or NULL if not found */ struct rproc *rproc_get_by_child(struct device *dev) { diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c index 11423588965a..469c52e62faf 100644 --- a/drivers/remoteproc/remoteproc_elf_loader.c +++ b/drivers/remoteproc/remoteproc_elf_loader.c @@ -31,6 +31,8 @@ * @fw: the ELF firmware image * * Make sure this fw image is sane (ie a correct ELF32/ELF64 file). + * + * Return: 0 on success and -EINVAL upon any failure */ int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw) { @@ -117,11 +119,11 @@ EXPORT_SYMBOL(rproc_elf_sanity_check); * @rproc: the remote processor handle * @fw: the ELF firmware image * - * This function returns the entry point address of the ELF - * image. - * * Note that the boot address is not a configurable property of all remote * processors. Some will always boot at a specific hard-coded address. + * + * Return: entry point address of the ELF image + * */ u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) { @@ -152,6 +154,8 @@ EXPORT_SYMBOL(rproc_elf_get_boot_addr); * might be different: they might not have iommus, and would prefer to * directly allocate memory for every segment/resource. This is not yet * supported, though. + * + * Return: 0 on success and an appropriate error code otherwise */ int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw) { @@ -362,7 +366,7 @@ EXPORT_SYMBOL(rproc_elf_load_rsc_table); * This function finds the location of the loaded resource table. Don't * call this function if the table wasn't loaded yet - it's a bug if you do. * - * Returns the pointer to the resource table if it is found or NULL otherwise. + * Return: pointer to the resource table if it is found or NULL otherwise. * If the table wasn't loaded yet the result is unspecified. */ struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc, diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c index 0cc617f76068..cf4d54e98e6a 100644 --- a/drivers/remoteproc/remoteproc_virtio.c +++ b/drivers/remoteproc/remoteproc_virtio.c @@ -45,7 +45,7 @@ static bool rproc_virtio_notify(struct virtqueue *vq) * when the remote processor signals that a specific virtqueue has pending * messages available. * - * Returns IRQ_NONE if no message was found in the @notifyid virtqueue, + * Return: IRQ_NONE if no message was found in the @notifyid virtqueue, * and otherwise returns IRQ_HANDLED. */ irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int notifyid) @@ -325,7 +325,7 @@ static void rproc_virtio_dev_release(struct device *dev) * This function registers a virtio device. This vdev's partent is * the rproc device. * - * Returns 0 on success or an appropriate error value otherwise. + * Return: 0 on success or an appropriate error value otherwise */ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) { @@ -432,6 +432,8 @@ int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) * @data: must be null * * This function unregisters an existing virtio device. + * + * Return: 0 */ int rproc_remove_virtio_dev(struct device *dev, void *data) { diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h index 8b795b544f75..42a1f30e33a7 100644 --- a/include/linux/remoteproc.h +++ b/include/linux/remoteproc.h @@ -243,7 +243,7 @@ struct fw_rsc_trace { * @da: device address * @align: the alignment between the consumer and producer parts of the vring * @num: num of buffers supported by this vring (must be power of two) - * @notifyid is a unique rproc-wide notify index for this vring. This notify + * @notifyid: a unique rproc-wide notify index for this vring. This notify * index is used when kicking a remote processor, to let it know that this * vring is triggered. * @pa: physical address @@ -266,18 +266,18 @@ struct fw_rsc_vdev_vring { /** * struct fw_rsc_vdev - virtio device header * @id: virtio device id (as in virtio_ids.h) - * @notifyid is a unique rproc-wide notify index for this vdev. This notify + * @notifyid: a unique rproc-wide notify index for this vdev. This notify * index is used when kicking a remote processor, to let it know that the * status/features of this vdev have changes. - * @dfeatures specifies the virtio device features supported by the firmware - * @gfeatures is a place holder used by the host to write back the + * @dfeatures: specifies the virtio device features supported by the firmware + * @gfeatures: a place holder used by the host to write back the * negotiated features that are supported by both sides. - * @config_len is the size of the virtio config space of this vdev. The config + * @config_len: the size of the virtio config space of this vdev. The config * space lies in the resource table immediate after this vdev header. - * @status is a place holder where the host will indicate its virtio progress. - * @num_of_vrings indicates how many vrings are described in this vdev header + * @status: a place holder where the host will indicate its virtio progress. + * @num_of_vrings: indicates how many vrings are described in this vdev header * @reserved: reserved (must be zero) - * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. + * @vring: an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. * * This resource is a virtio device header: it provides information about * the vdev, and is then used by the host and its peer remote processors @@ -287,16 +287,17 @@ struct fw_rsc_vdev_vring { * to statically allocate a vdev upon registration of the rproc (dynamic vdev * allocation is not yet supported). * - * Note: unlike virtualization systems, the term 'host' here means - * the Linux side which is running remoteproc to control the remote - * processors. We use the name 'gfeatures' to comply with virtio's terms, - * though there isn't really any virtualized guest OS here: it's the host - * which is responsible for negotiating the final features. - * Yeah, it's a bit confusing. - * - * Note: immediately following this structure is the virtio config space for - * this vdev (which is specific to the vdev; for more info, read the virtio - * spec). the size of the config space is specified by @config_len. + * Note: + * 1. unlike virtualization systems, the term 'host' here means + * the Linux side which is running remoteproc to control the remote + * processors. We use the name 'gfeatures' to comply with virtio's terms, + * though there isn't really any virtualized guest OS here: it's the host + * which is responsible for negotiating the final features. + * Yeah, it's a bit confusing. + * + * 2. immediately following this structure is the virtio config space for + * this vdev (which is specific to the vdev; for more info, read the virtio + * spec). the size of the config space is specified by @config_len. */ struct fw_rsc_vdev { u32 id; @@ -440,7 +441,7 @@ enum rproc_state { * enum rproc_crash_type - remote processor crash types * @RPROC_MMUFAULT: iommu fault * @RPROC_WATCHDOG: watchdog bite - * @RPROC_FATAL_ERROR fatal error + * @RPROC_FATAL_ERROR: fatal error * * Each element of the enum is used as an array index. So that, the value of * the elements should be always something sane. @@ -457,9 +458,9 @@ enum rproc_crash_type { * enum rproc_dump_mechanism - Coredump options for core * @RPROC_COREDUMP_DISABLED: Don't perform any dump * @RPROC_COREDUMP_ENABLED: Copy dump to separate buffer and carry on with - recovery + * recovery * @RPROC_COREDUMP_INLINE: Read segments directly from device memory. Stall - recovery until all segments are read + * recovery until all segments are read */ enum rproc_dump_mechanism { RPROC_COREDUMP_DISABLED, @@ -475,6 +476,7 @@ enum rproc_dump_mechanism { * @priv: private data associated with the dump_segment * @dump: custom dump function to fill device memory segment associated * with coredump + * @offset: offset of the segment */ struct rproc_dump_segment { struct list_head node; @@ -524,7 +526,9 @@ struct rproc_dump_segment { * @auto_boot: flag to indicate if remote processor should be auto-started * @dump_segments: list of segments in the firmware * @nb_vdev: number of vdev currently handled by rproc - * @char_dev: character device of the rproc + * @elf_class: firmware ELF class + * @elf_machine: firmware ELF machine + * @cdev: character device of the rproc * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release */ struct rproc { @@ -613,10 +617,10 @@ struct rproc_vring { * struct rproc_vdev - remoteproc state for a supported virtio device * @refcount: reference counter for the vdev and vring allocations * @subdev: handle for registering the vdev as a rproc subdevice + * @dev: device struct used for reference count semantics * @id: virtio device id (as in virtio_ids.h) * @node: list node * @rproc: the rproc handle - * @vdev: the virio device * @vring: the vrings for this vdev * @rsc_offset: offset of the vdev's resource entry * @index: vdev position versus other vdev declared in resource table
Fix all the kernel-doc warnings in various remoteproc core files. Some of them just needed a formatting cleanup change, while others needed the Return statement to be added, or documenting the missed structure elements. Signed-off-by: Suman Anna <s-anna@ti.com> --- drivers/remoteproc/remoteproc_core.c | 44 +++++++++++++------ drivers/remoteproc/remoteproc_elf_loader.c | 12 ++++-- drivers/remoteproc/remoteproc_virtio.c | 6 ++- include/linux/remoteproc.h | 50 ++++++++++++---------- 4 files changed, 69 insertions(+), 43 deletions(-)