Message ID | 20210525221955.265524-7-kent.overstreet@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | None | expand |
On Tue, May 25, 2021 at 06:19:54PM -0400, Kent Overstreet wrote: > bcachefs has log structured btree nodes, in addition to a regular > journal, which means that unless we replay to markers in the log in the > same order that they happened and are careful to avoid writing in > between replaying to different events - we need to wipe and start fresh > each time. > > Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> > --- > tests/generic/455 | 14 ++++++++++++++ > tests/generic/457 | 14 ++++++++++++++ > tests/generic/482 | 27 ++++++++++++++++++++------- > 3 files changed, 48 insertions(+), 7 deletions(-) > > diff --git a/tests/generic/455 b/tests/generic/455 > index 5b4b242e74..6dc46c3c72 100755 > --- a/tests/generic/455 > +++ b/tests/generic/455 > @@ -35,6 +35,17 @@ _require_dm_target thin-pool > > rm -f $seqres.full > > +_reset_dmthin() > +{ > + # With bcachefs, we need to wipe and start fresh every time we replay to a > + # different point in time - if we see metadata from a future point in time, > + # or an unrelated mount, bcachefs will get confused: > + if [ "$FSTYP" = "bcachefs" ]; then > + _dmthin_cleanup > + _dmthin_init $devsize $devsize $csize $lowspace > + fi > +} I think we probably could make it a common helper, and currently only bcachefs needs reset, and more log structured filesystems may be supported in the future. Thanks, Eryu > + > check_files() > { > local name=$1 > @@ -44,6 +55,7 @@ check_files() > local filename=$(basename $i) > local mark="${filename##*.}" > echo "checking $filename" >> $seqres.full > + _reset_dmthin > _log_writes_replay_log $filename $DMTHIN_VOL_DEV > _dmthin_mount > local expected_md5=$(_md5_checksum $i) > @@ -101,6 +113,7 @@ _dmthin_check_fs > > # check pre umount > echo "checking pre umount" >> $seqres.full > +_reset_dmthin > _log_writes_replay_log last $DMTHIN_VOL_DEV > _dmthin_mount > _dmthin_check_fs > @@ -111,6 +124,7 @@ done > > # Check the end > echo "checking post umount" >> $seqres.full > +_reset_dmthin > _log_writes_replay_log end $DMTHIN_VOL_DEV > _dmthin_mount > for j in `seq 0 $((NUM_FILES-1))`; do > diff --git a/tests/generic/457 b/tests/generic/457 > index ddbd90cf0c..f17d4e4430 100755 > --- a/tests/generic/457 > +++ b/tests/generic/457 > @@ -37,6 +37,17 @@ _require_dm_target thin-pool > > rm -f $seqres.full > > +_reset_dmthin() > +{ > + # With bcachefs, we need to wipe and start fresh every time we replay to a > + # different point in time - if we see metadata from a future point in time, > + # or an unrelated mount, bcachefs will get confused: > + if [ "$FSTYP" = "bcachefs" ]; then > + _dmthin_cleanup > + _dmthin_init $devsize $devsize $csize $lowspace > + fi > +} > + > check_files() > { > local name=$1 > @@ -46,6 +57,7 @@ check_files() > local filename=$(basename $i) > local mark="${filename##*.}" > echo "checking $filename" >> $seqres.full > + _reset_dmthin > _log_writes_replay_log $filename $DMTHIN_VOL_DEV > _dmthin_mount > local expected_md5=$(_md5_checksum $i) > @@ -105,6 +117,7 @@ _dmthin_check_fs > > # check pre umount > echo "checking pre umount" >> $seqres.full > +_reset_dmthin > _log_writes_replay_log last $DMTHIN_VOL_DEV > _dmthin_mount > _dmthin_check_fs > @@ -115,6 +128,7 @@ done > > # Check the end > echo "checking post umount" >> $seqres.full > +_reset_dmthin > _log_writes_replay_log end $DMTHIN_VOL_DEV > _dmthin_mount > for j in `seq 0 $((NUM_FILES-1))`; do > diff --git a/tests/generic/482 b/tests/generic/482 > index 86941e8468..3cbe187f2e 100755 > --- a/tests/generic/482 > +++ b/tests/generic/482 > @@ -77,16 +77,29 @@ prev=$(_log_writes_mark_to_entry_number mkfs) > cur=$(_log_writes_find_next_fua $prev) > [ -z "$cur" ] && _fail "failed to locate next FUA write" > > +if [ "$FSTYP" = "bcachefs" ]; then > + _dmthin_cleanup > + _dmthin_init $devsize $devsize $csize $lowspace > +fi > + > while [ ! -z "$cur" ]; do > _log_writes_replay_log_range $cur $DMTHIN_VOL_DEV >> $seqres.full > > - # Here we need extra mount to replay the log, mainly for journal based > - # fs, as their fsck will report dirty log as error. > - # We don't care to preserve any data on the replay dev, as we can replay > - # back to the point we need, and in fact sometimes creating/deleting > - # snapshots repeatedly can be slower than replaying the log. > - _dmthin_mount > - _dmthin_check_fs > + if [ "$FSTYP" = "bcachefs" ]; then > + # bcachefs will get confused if fsck does writes to replay the log, > + # but then we replay writes from an earlier point in time on the > + # same fs - but fsck in -n mode won't do any writes: > + _check_scratch_fs -n $DMTHIN_VOL_DEV > + else > + # Here we need extra mount to replay the log, mainly for journal based > + # fs, as their fsck will report dirty log as error. > + # We don't care to preserve any data on the replay dev, as we can replay > + # back to the point we need, and in fact sometimes creating/deleting > + # snapshots repeatedly can be slower than replaying the log. > + > + _dmthin_mount > + _dmthin_check_fs > + fi > > prev=$cur > cur=$(_log_writes_find_next_fua $(($cur + 1))) > -- > 2.32.0.rc0
On Sun, May 30, 2021 at 09:18:49PM +0800, Eryu Guan wrote: > On Tue, May 25, 2021 at 06:19:54PM -0400, Kent Overstreet wrote: > > bcachefs has log structured btree nodes, in addition to a regular > > journal, which means that unless we replay to markers in the log in the > > same order that they happened and are careful to avoid writing in > > between replaying to different events - we need to wipe and start fresh > > each time. > > > > Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> > > --- > > tests/generic/455 | 14 ++++++++++++++ > > tests/generic/457 | 14 ++++++++++++++ > > tests/generic/482 | 27 ++++++++++++++++++++------- > > 3 files changed, 48 insertions(+), 7 deletions(-) > > > > diff --git a/tests/generic/455 b/tests/generic/455 > > index 5b4b242e74..6dc46c3c72 100755 > > --- a/tests/generic/455 > > +++ b/tests/generic/455 > > @@ -35,6 +35,17 @@ _require_dm_target thin-pool > > > > rm -f $seqres.full > > > > +_reset_dmthin() > > +{ > > + # With bcachefs, we need to wipe and start fresh every time we replay to a > > + # different point in time - if we see metadata from a future point in time, > > + # or an unrelated mount, bcachefs will get confused: > > + if [ "$FSTYP" = "bcachefs" ]; then > > + _dmthin_cleanup > > + _dmthin_init $devsize $devsize $csize $lowspace > > + fi > > +} > > I think we probably could make it a common helper, and currently only > bcachefs needs reset, and more log structured filesystems may be > supported in the future. I think it might be better to wait until we have more dmlogwrites tests or another filesystem that needs this - I don't think this would be a good common helper as is, it's too coupled to what the tests are doing - factoring out helpers just because you spot identical code is an anti pattern when there isn't a good notion of what you're abstracting Right now 455 and 457 are basically identical anyways, factoring out a single helper and ignoring the rest doesn't make much sense to me.
diff --git a/tests/generic/455 b/tests/generic/455 index 5b4b242e74..6dc46c3c72 100755 --- a/tests/generic/455 +++ b/tests/generic/455 @@ -35,6 +35,17 @@ _require_dm_target thin-pool rm -f $seqres.full +_reset_dmthin() +{ + # With bcachefs, we need to wipe and start fresh every time we replay to a + # different point in time - if we see metadata from a future point in time, + # or an unrelated mount, bcachefs will get confused: + if [ "$FSTYP" = "bcachefs" ]; then + _dmthin_cleanup + _dmthin_init $devsize $devsize $csize $lowspace + fi +} + check_files() { local name=$1 @@ -44,6 +55,7 @@ check_files() local filename=$(basename $i) local mark="${filename##*.}" echo "checking $filename" >> $seqres.full + _reset_dmthin _log_writes_replay_log $filename $DMTHIN_VOL_DEV _dmthin_mount local expected_md5=$(_md5_checksum $i) @@ -101,6 +113,7 @@ _dmthin_check_fs # check pre umount echo "checking pre umount" >> $seqres.full +_reset_dmthin _log_writes_replay_log last $DMTHIN_VOL_DEV _dmthin_mount _dmthin_check_fs @@ -111,6 +124,7 @@ done # Check the end echo "checking post umount" >> $seqres.full +_reset_dmthin _log_writes_replay_log end $DMTHIN_VOL_DEV _dmthin_mount for j in `seq 0 $((NUM_FILES-1))`; do diff --git a/tests/generic/457 b/tests/generic/457 index ddbd90cf0c..f17d4e4430 100755 --- a/tests/generic/457 +++ b/tests/generic/457 @@ -37,6 +37,17 @@ _require_dm_target thin-pool rm -f $seqres.full +_reset_dmthin() +{ + # With bcachefs, we need to wipe and start fresh every time we replay to a + # different point in time - if we see metadata from a future point in time, + # or an unrelated mount, bcachefs will get confused: + if [ "$FSTYP" = "bcachefs" ]; then + _dmthin_cleanup + _dmthin_init $devsize $devsize $csize $lowspace + fi +} + check_files() { local name=$1 @@ -46,6 +57,7 @@ check_files() local filename=$(basename $i) local mark="${filename##*.}" echo "checking $filename" >> $seqres.full + _reset_dmthin _log_writes_replay_log $filename $DMTHIN_VOL_DEV _dmthin_mount local expected_md5=$(_md5_checksum $i) @@ -105,6 +117,7 @@ _dmthin_check_fs # check pre umount echo "checking pre umount" >> $seqres.full +_reset_dmthin _log_writes_replay_log last $DMTHIN_VOL_DEV _dmthin_mount _dmthin_check_fs @@ -115,6 +128,7 @@ done # Check the end echo "checking post umount" >> $seqres.full +_reset_dmthin _log_writes_replay_log end $DMTHIN_VOL_DEV _dmthin_mount for j in `seq 0 $((NUM_FILES-1))`; do diff --git a/tests/generic/482 b/tests/generic/482 index 86941e8468..3cbe187f2e 100755 --- a/tests/generic/482 +++ b/tests/generic/482 @@ -77,16 +77,29 @@ prev=$(_log_writes_mark_to_entry_number mkfs) cur=$(_log_writes_find_next_fua $prev) [ -z "$cur" ] && _fail "failed to locate next FUA write" +if [ "$FSTYP" = "bcachefs" ]; then + _dmthin_cleanup + _dmthin_init $devsize $devsize $csize $lowspace +fi + while [ ! -z "$cur" ]; do _log_writes_replay_log_range $cur $DMTHIN_VOL_DEV >> $seqres.full - # Here we need extra mount to replay the log, mainly for journal based - # fs, as their fsck will report dirty log as error. - # We don't care to preserve any data on the replay dev, as we can replay - # back to the point we need, and in fact sometimes creating/deleting - # snapshots repeatedly can be slower than replaying the log. - _dmthin_mount - _dmthin_check_fs + if [ "$FSTYP" = "bcachefs" ]; then + # bcachefs will get confused if fsck does writes to replay the log, + # but then we replay writes from an earlier point in time on the + # same fs - but fsck in -n mode won't do any writes: + _check_scratch_fs -n $DMTHIN_VOL_DEV + else + # Here we need extra mount to replay the log, mainly for journal based + # fs, as their fsck will report dirty log as error. + # We don't care to preserve any data on the replay dev, as we can replay + # back to the point we need, and in fact sometimes creating/deleting + # snapshots repeatedly can be slower than replaying the log. + + _dmthin_mount + _dmthin_check_fs + fi prev=$cur cur=$(_log_writes_find_next_fua $(($cur + 1)))
bcachefs has log structured btree nodes, in addition to a regular journal, which means that unless we replay to markers in the log in the same order that they happened and are careful to avoid writing in between replaying to different events - we need to wipe and start fresh each time. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> --- tests/generic/455 | 14 ++++++++++++++ tests/generic/457 | 14 ++++++++++++++ tests/generic/482 | 27 ++++++++++++++++++++------- 3 files changed, 48 insertions(+), 7 deletions(-)