new file mode 100644
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+ On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
+ Standby Mode share the same register block.
+
+ They provide the following functionalities:
+ - The CPG block generates various core clocks,
+ - The Module Standby Mode block provides two functions:
+ 1. Module Standby, providing a Clock Domain to control the clock supply
+ to individual SoC devices,
+ 2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+ compatible:
+ const: renesas,r9a07g044-cpg # RZ/G2{L,LC}
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Clock source to CPG can be either from external clock input (EXCLK) or
+ crystal oscillator (XIN/XOUT).
+ const: extal
+
+ '#clock-cells':
+ description: |
+ - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+ and a core clock reference, as defined in
+ <dt-bindings/clock/r9a07g044-cpg.h>
+ - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+ a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>.
+ const: 2
+
+ '#power-domain-cells':
+ description:
+ SoC devices that are part of the CPG/Module Standby Mode Clock Domain and
+ can be power-managed through Module Standby should refer to the CPG device
+ node in their "power-domains" property, as documented by the generic PM
+ Domain bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+ const: 0
+
+ '#reset-cells':
+ description:
+ The single reset specifier cell must be the module number, as defined in
+ the <dt-bindings/clock/r9a07g044-cpg.h>.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#power-domain-cells'
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ cpg: clock-controller@11010000 {
+ compatible = "renesas,r9a07g044-cpg";
+ reg = <0x11010000 0x10000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };