diff mbox series

[1/2] arm64: dts: imx8mm-evk: disable over current for usb1

Message ID 1622201399-3862-1-git-send-email-jun.li@nxp.com (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: imx8mm-evk: disable over current for usb1 | expand

Commit Message

Jun Li May 28, 2021, 11:29 a.m. UTC 
imx8mm evk board usb1 port does not support over current detection,
so disable it.

Signed-off-by: Li Jun <jun.li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 1 +
 1 file changed, 1 insertion(+)

Comments

Shawn Guo June 12, 2021, 7:13 a.m. UTC | #1 
On Fri, May 28, 2021 at 07:29:58PM +0800, Li Jun wrote:
> imx8mm evk board usb1 port does not support over current detection,
> so disable it.
> 
> Signed-off-by: Li Jun <jun.li@nxp.com>

Applied both, thanks.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 6518f088b2c2..e033d0257b5a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -314,6 +314,7 @@  &usbotg1 {
 	srp-disable;
 	adp-disable;
 	usb-role-switch;
+	disable-over-current;
 	samsung,picophy-pre-emp-curr-control = <3>;
 	samsung,picophy-dc-vol-level-adjust = <7>;
 	status = "okay";