| Message ID | 20210615110636.23403-2-andre.przywara@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: sunxi: Initial Allwinner H616 SoC support | expand |
On Tue, 15 Jun 2021 12:06:18 +0100, Andre Przywara wrote: > The AXP305 PMIC used on many boards with the H616 SoC seems to be fully > compatible to the AXP805 PMIC, so add the proper chain of compatible > strings. > > Also at least on one board (Orangepi Zero2) there is no interrupt line > connected to the CPU, so make the "interrupts" property optional. > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > --- > Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > Please add Acked-by/Reviewed-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. If a tag was not added on purpose, please state why and what changed.
On Tue, 15 Jun 2021 17:33:45 -0600 Rob Herring <robh@kernel.org> wrote: > On Tue, 15 Jun 2021 12:06:18 +0100, Andre Przywara wrote: > > The AXP305 PMIC used on many boards with the H616 SoC seems to be fully > > compatible to the AXP805 PMIC, so add the proper chain of compatible > > strings. > > > > Also at least on one board (Orangepi Zero2) there is no interrupt line > > connected to the CPU, so make the "interrupts" property optional. > > > > Signed-off-by: Andre Przywara <andre.przywara@arm.com> > > --- > > Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > Please add Acked-by/Reviewed-by tags when posting new versions. However, > there's no need to repost patches *only* to add the tags. The upstream > maintainer will do that for acks received on the version they apply. > > If a tag was not added on purpose, please state why and what changed. Argh, sorry, I was still wondering whether I should try the YAML conversion, so didn't apply your tag right away - and then missed it when I decided to postpone this. Plus I actually fixed some blunder (copy&paste typo in the compatible), and I mostly drop tags upon changes. Cheers, Andre
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 4991a6415796..2b53dcc0ea61 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -26,10 +26,10 @@ Required properties: * "x-powers,axp803" * "x-powers,axp806" * "x-powers,axp805", "x-powers,axp806" + * "x-powers,axp305", "x-powers,axp805", "x-powers,axp806" * "x-powers,axp809" * "x-powers,axp813" - reg: The I2C slave address or RSB hardware address for the AXP chip -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 @@ -43,6 +43,7 @@ more information: AXP20x/LDO3: software-based implementation Optional properties: +- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz AXP152/20X: range: 750-1875, Default: 1.5 MHz AXP22X/8XX: range: 1800-4050, Default: 3 MHz
The AXP305 PMIC used on many boards with the H616 SoC seems to be fully compatible to the AXP805 PMIC, so add the proper chain of compatible strings. Also at least on one board (Orangepi Zero2) there is no interrupt line connected to the CPU, so make the "interrupts" property optional. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)