| Message ID | 20210603182242.25733-2-rashmi.a@intel.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | mmc clock-frequency property update and | expand |
On 6/3/21 8:22 PM, rashmi.a@intel.com wrote: > From: Rashmi A <rashmi.a@intel.com> > > If clock-frequency property is set and it is not the same as the current > clock rate of clk_xin(base clock frequency), set clk_xin to use the > provided clock rate. > > Signed-off-by: Rashmi A <rashmi.a@intel.com> > Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/host/sdhci-of-arasan.c | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c > index 839965f7c717..0e7c07ed9690 100644 > --- a/drivers/mmc/host/sdhci-of-arasan.c > +++ b/drivers/mmc/host/sdhci-of-arasan.c > @@ -1542,6 +1542,8 @@ static int sdhci_arasan_probe(struct platform_device *pdev) > } > } > > + sdhci_get_of_property(pdev); > + > sdhci_arasan->clk_ahb = devm_clk_get(dev, "clk_ahb"); > if (IS_ERR(sdhci_arasan->clk_ahb)) { > ret = dev_err_probe(dev, PTR_ERR(sdhci_arasan->clk_ahb), > @@ -1561,14 +1563,22 @@ static int sdhci_arasan_probe(struct platform_device *pdev) > goto err_pltfm_free; > } > > + /* If clock-frequency property is set, use the provided value */ > + if (pltfm_host->clock && > + pltfm_host->clock != clk_get_rate(clk_xin)) { > + ret = clk_set_rate(clk_xin, pltfm_host->clock); > + if (ret) { > + dev_err(&pdev->dev, "Failed to set SD clock rate\n"); > + goto clk_dis_ahb; > + } > + } > + > ret = clk_prepare_enable(clk_xin); > if (ret) { > dev_err(dev, "Unable to enable SD clock.\n"); > goto clk_dis_ahb; > } > > - sdhci_get_of_property(pdev); > - > if (of_property_read_bool(np, "xlnx,fails-without-test-cd")) > sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_FORCE_CDTEST; > > Manish/Sai: Please retest this on Xilinx SOC. Thanks, Michal
On Fri, 4 Jun 2021 at 08:13, Michal Simek <michal.simek@xilinx.com> wrote: > > > > On 6/3/21 8:22 PM, rashmi.a@intel.com wrote: > > From: Rashmi A <rashmi.a@intel.com> > > > > If clock-frequency property is set and it is not the same as the current > > clock rate of clk_xin(base clock frequency), set clk_xin to use the > > provided clock rate. > > > > Signed-off-by: Rashmi A <rashmi.a@intel.com> > > Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> > > --- > > drivers/mmc/host/sdhci-of-arasan.c | 14 ++++++++++++-- > > 1 file changed, 12 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c > > index 839965f7c717..0e7c07ed9690 100644 > > --- a/drivers/mmc/host/sdhci-of-arasan.c > > +++ b/drivers/mmc/host/sdhci-of-arasan.c > > @@ -1542,6 +1542,8 @@ static int sdhci_arasan_probe(struct platform_device *pdev) > > } > > } > > > > + sdhci_get_of_property(pdev); > > + > > sdhci_arasan->clk_ahb = devm_clk_get(dev, "clk_ahb"); > > if (IS_ERR(sdhci_arasan->clk_ahb)) { > > ret = dev_err_probe(dev, PTR_ERR(sdhci_arasan->clk_ahb), > > @@ -1561,14 +1563,22 @@ static int sdhci_arasan_probe(struct platform_device *pdev) > > goto err_pltfm_free; > > } > > > > + /* If clock-frequency property is set, use the provided value */ > > + if (pltfm_host->clock && > > + pltfm_host->clock != clk_get_rate(clk_xin)) { > > + ret = clk_set_rate(clk_xin, pltfm_host->clock); > > + if (ret) { > > + dev_err(&pdev->dev, "Failed to set SD clock rate\n"); > > + goto clk_dis_ahb; > > + } > > + } > > + > > ret = clk_prepare_enable(clk_xin); > > if (ret) { > > dev_err(dev, "Unable to enable SD clock.\n"); > > goto clk_dis_ahb; > > } > > > > - sdhci_get_of_property(pdev); > > - > > if (of_property_read_bool(np, "xlnx,fails-without-test-cd")) > > sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_FORCE_CDTEST; > > > > > > Manish/Sai: Please retest this on Xilinx SOC. > > Thanks, > Michal I am about to queue this patch, but it would be nice to get your confirmation and tested-by tags before doing so. Would that be possible within the next couple of days? Kind regards Uffe
Hi, > -----Original Message----- > From: Ulf Hansson <ulf.hansson@linaro.org> > Sent: Thursday, June 17, 2021 3:34 PM > To: Michal Simek <michals@xilinx.com>; Manish Narani > <MNARANI@xilinx.com>; Sai Krishna Potthuri <lakshmis@xilinx.com> > Cc: rashmi.a@intel.com; linux-drivers-review-request@eclists.intel.com; > linux-mmc <linux-mmc@vger.kernel.org>; Linux ARM <linux-arm- > kernel@lists.infradead.org>; Linux Kernel Mailing List <linux- > kernel@vger.kernel.org>; Kishon <kishon@ti.com>; Vinod Koul > <vkoul@kernel.org>; Andy Shevchenko > <andriy.shevchenko@linux.intel.com>; linux-phy@lists.infradead.org; Mark > Gross <mgross@linux.intel.com>; kris.pan@linux.intel.com; > furong.zhou@intel.com; mallikarjunappa.sangannavar@intel.com; Adrian > Hunter <adrian.hunter@intel.com>; mahesh.r.vaidya@intel.com; > nandhini.srikandan@intel.com; Raja Subramanian, Lakshmi Bai > <lakshmi.bai.raja.subramanian@intel.com> > Subject: Re: [“PATCH” 1/2] mmc: sdhci-of-arasan: Use clock-frequency > property to update clk_xin > > On Fri, 4 Jun 2021 at 08:13, Michal Simek <michal.simek@xilinx.com> wrote: > > > > > > > > On 6/3/21 8:22 PM, rashmi.a@intel.com wrote: > > > From: Rashmi A <rashmi.a@intel.com> > > > > > > If clock-frequency property is set and it is not the same as the > > > current clock rate of clk_xin(base clock frequency), set clk_xin to > > > use the provided clock rate. > > > > > > Signed-off-by: Rashmi A <rashmi.a@intel.com> > > > Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> > > > --- > > > drivers/mmc/host/sdhci-of-arasan.c | 14 ++++++++++++-- > > > 1 file changed, 12 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c > > > b/drivers/mmc/host/sdhci-of-arasan.c > > > index 839965f7c717..0e7c07ed9690 100644 > > > --- a/drivers/mmc/host/sdhci-of-arasan.c > > > +++ b/drivers/mmc/host/sdhci-of-arasan.c > > > @@ -1542,6 +1542,8 @@ static int sdhci_arasan_probe(struct > platform_device *pdev) > > > } > > > } > > > > > > + sdhci_get_of_property(pdev); > > > + > > > sdhci_arasan->clk_ahb = devm_clk_get(dev, "clk_ahb"); > > > if (IS_ERR(sdhci_arasan->clk_ahb)) { > > > ret = dev_err_probe(dev, > > > PTR_ERR(sdhci_arasan->clk_ahb), @@ -1561,14 +1563,22 @@ static int > sdhci_arasan_probe(struct platform_device *pdev) > > > goto err_pltfm_free; > > > } > > > > > > + /* If clock-frequency property is set, use the provided value */ > > > + if (pltfm_host->clock && > > > + pltfm_host->clock != clk_get_rate(clk_xin)) { > > > + ret = clk_set_rate(clk_xin, pltfm_host->clock); > > > + if (ret) { > > > + dev_err(&pdev->dev, "Failed to set SD clock rate\n"); > > > + goto clk_dis_ahb; > > > + } > > > + } > > > + > > > ret = clk_prepare_enable(clk_xin); > > > if (ret) { > > > dev_err(dev, "Unable to enable SD clock.\n"); > > > goto clk_dis_ahb; > > > } > > > > > > - sdhci_get_of_property(pdev); > > > - > > > if (of_property_read_bool(np, "xlnx,fails-without-test-cd")) > > > sdhci_arasan->quirks |= > > > SDHCI_ARASAN_QUIRK_FORCE_CDTEST; > > > > > > > > > > Manish/Sai: Please retest this on Xilinx SOC. > > > > Thanks, > > Michal > > I am about to queue this patch, but it would be nice to get your confirmation > and tested-by tags before doing so. Would that be possible within the next > couple of days? Tested this patch on Xilinx platforms. Tested-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Regards Sai Krishna
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index 839965f7c717..0e7c07ed9690 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -1542,6 +1542,8 @@ static int sdhci_arasan_probe(struct platform_device *pdev) } } + sdhci_get_of_property(pdev); + sdhci_arasan->clk_ahb = devm_clk_get(dev, "clk_ahb"); if (IS_ERR(sdhci_arasan->clk_ahb)) { ret = dev_err_probe(dev, PTR_ERR(sdhci_arasan->clk_ahb), @@ -1561,14 +1563,22 @@ static int sdhci_arasan_probe(struct platform_device *pdev) goto err_pltfm_free; } + /* If clock-frequency property is set, use the provided value */ + if (pltfm_host->clock && + pltfm_host->clock != clk_get_rate(clk_xin)) { + ret = clk_set_rate(clk_xin, pltfm_host->clock); + if (ret) { + dev_err(&pdev->dev, "Failed to set SD clock rate\n"); + goto clk_dis_ahb; + } + } + ret = clk_prepare_enable(clk_xin); if (ret) { dev_err(dev, "Unable to enable SD clock.\n"); goto clk_dis_ahb; } - sdhci_get_of_property(pdev); - if (of_property_read_bool(np, "xlnx,fails-without-test-cd")) sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_FORCE_CDTEST;