diff mbox series

bus: mhi: core: Disable pre-emption for data events tasklet processing

Message ID 1624054985-31365-1-git-send-email-bbhatt@codeaurora.org (mailing list archive)
State Not Applicable, archived
Headers show
Series bus: mhi: core: Disable pre-emption for data events tasklet processing | expand

Commit Message

Bhaumik Bhatt June 18, 2021, 10:23 p.m. UTC
With spin_lock_bh(), it is possible that a tasklet processing data
events gets scheduled out if another higher priority tasklet is
ready to run. While the tasklet is sleeping, it can hold the event
ring spinlock and block another tasklet, for example, one processing
an M0 state change event, from acquiring it. This can starve the
core which blocks in an attempt to acquire the spinlock until it
gets released. Fix this issue by disabling pre-emption on the core
processing data events and allow it to run to completion such that
other tasklets do not block for long periods.

Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Manivannan Sadhasivam June 19, 2021, 7:44 a.m. UTC | #1
On Fri, Jun 18, 2021 at 03:23:05PM -0700, Bhaumik Bhatt wrote:
> With spin_lock_bh(), it is possible that a tasklet processing data
> events gets scheduled out if another higher priority tasklet is
> ready to run. While the tasklet is sleeping, it can hold the event
> ring spinlock and block another tasklet, for example, one processing
> an M0 state change event, from acquiring it. This can starve the
> core which blocks in an attempt to acquire the spinlock until it
> gets released. Fix this issue by disabling pre-emption on the core
> processing data events and allow it to run to completion such that
> other tasklets do not block for long periods.
> 

Are you sure?

IIUC, the tasklets priority is only used while trying to schedule the
next pending tasklet. But I don't think a high priority tasklet can
preempt the low priority one.

Please correct me if I'm wrong.

Thanks,
Mani

> Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> ---
>  drivers/bus/mhi/core/main.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
> index 3775c77..02c8c09 100644
> --- a/drivers/bus/mhi/core/main.c
> +++ b/drivers/bus/mhi/core/main.c
> @@ -1036,11 +1036,12 @@ void mhi_ev_task(unsigned long data)
>  {
>  	struct mhi_event *mhi_event = (struct mhi_event *)data;
>  	struct mhi_controller *mhi_cntrl = mhi_event->mhi_cntrl;
> +	unsigned long flags;
>  
>  	/* process all pending events */
> -	spin_lock_bh(&mhi_event->lock);
> +	spin_lock_irqsave(&mhi_event->lock, flags);
>  	mhi_event->process_event(mhi_cntrl, mhi_event, U32_MAX);
> -	spin_unlock_bh(&mhi_event->lock);
> +	spin_unlock_irqrestore(&mhi_event->lock, flags);
>  }
>  
>  void mhi_ctrl_ev_task(unsigned long data)
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
Hemant Kumar June 21, 2021, 5:54 p.m. UTC | #2
On Sat, 2021-06-19 at 13:14 +0530, Manivannan Sadhasivam wrote:
> On Fri, Jun 18, 2021 at 03:23:05PM -0700, Bhaumik Bhatt wrote:
> > 
> > With spin_lock_bh(), it is possible that a tasklet processing data
> > events gets scheduled out if another higher priority tasklet is
Needs some re-wording. What we observed was threded irq storms and in
the past we observed some RT tasks preempting MHI tasklet for long
time.
> > ready to run. While the tasklet is sleeping, it can hold the event
Not allowed to sleep in tasklet context.
> > ring spinlock and block another tasklet, for example, one
> > processing
> > an M0 state change event, from acquiring it. This can starve the
> > core which blocks in an attempt to acquire the spinlock until it
> > gets released. Fix this issue by disabling pre-emption on the core
> > processing data events and allow it to run to completion such that
> > other tasklets do not block for long periods.
> > 
> Are you sure?
> 
> IIUC, the tasklets priority is only used while trying to schedule the
> next pending tasklet. But I don't think a high priority tasklet can
> preempt the low priority one.
> 
> Please correct me if I'm wrong.
> 
> Thanks,
> Mani
> 
[..]
diff mbox series

Patch

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 3775c77..02c8c09 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -1036,11 +1036,12 @@  void mhi_ev_task(unsigned long data)
 {
 	struct mhi_event *mhi_event = (struct mhi_event *)data;
 	struct mhi_controller *mhi_cntrl = mhi_event->mhi_cntrl;
+	unsigned long flags;
 
 	/* process all pending events */
-	spin_lock_bh(&mhi_event->lock);
+	spin_lock_irqsave(&mhi_event->lock, flags);
 	mhi_event->process_event(mhi_cntrl, mhi_event, U32_MAX);
-	spin_unlock_bh(&mhi_event->lock);
+	spin_unlock_irqrestore(&mhi_event->lock, flags);
 }
 
 void mhi_ctrl_ev_task(unsigned long data)