| Message ID | 20210618175041.323495-2-caleb@connolly.tech (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RESEND,v2,1/6] dt-bindings: input: add Qualcomm SPMI haptics driver | expand |
On Fri, 18 Jun 2021 17:51:03 +0000, Caleb Connolly wrote: > Add bindings for qcom PMIC SPMI haptics driver. > > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > --- > .../bindings/input/qcom,spmi-haptics.yaml | 128 ++++++++++++++++++ > include/dt-bindings/input/qcom,spmi-haptics.h | 32 +++++ > 2 files changed, 160 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml > create mode 100644 include/dt-bindings/input/qcom,spmi-haptics.h > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml:23:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: Documentation/devicetree/bindings/input/qcom,spmi-haptics.example.dt.yaml:0:0: /example-0/pmic@3: failed to match any schema with compatible: ['qcom,pmi8998', 'qcom,spmi-pmic'] Documentation/devicetree/bindings/input/qcom,spmi-haptics.example.dt.yaml:0:0: /example-0/pmic@3: failed to match any schema with compatible: ['qcom,pmi8998', 'qcom,spmi-pmic'] \ndoc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1494375 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Fri, Jun 18, 2021 at 05:51:03PM +0000, Caleb Connolly wrote: > Add bindings for qcom PMIC SPMI haptics driver. > > Signed-off-by: Caleb Connolly <caleb@connolly.tech> > --- > .../bindings/input/qcom,spmi-haptics.yaml | 128 ++++++++++++++++++ > include/dt-bindings/input/qcom,spmi-haptics.h | 32 +++++ > 2 files changed, 160 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml > create mode 100644 include/dt-bindings/input/qcom,spmi-haptics.h > > diff --git a/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml > new file mode 100644 > index 000000000000..8ef9b4ec3a07 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml > @@ -0,0 +1,128 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright 2020 Unisoc Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/qcom,spmi-haptics.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies Inc PMI8998 spmi haptics > + > +maintainers: > + - Caleb Connolly <caleb@connolly.tech> > + > +description: | > + Qualcomm SPMI haptics is a peripheral on some QTI PMICs. It supports linear resonant > + actuators and eccentric rotating mass type haptics commonly found in mobile devices. > + It supports multiple sources of wave data such as an internal buffer, direct play > + (from kernel or userspace) as well as an audio output mode. > + > +properties: > + compatible: > + items: > + - enum: > + - qcom,pmi8998-haptics > + - qcom,pmi8996-haptics > + - qcom,pmi8941-haptics > + - const: qcom,spmi-haptics > + > + reg: > + maxItems: 1 > + > + interrupts: > + items: > + - description: short circuit interrupt > + - description: play interrupt > + > + interrupt-names: > + items: > + - const: short > + - const: play > + > + qcom,actuator-type: > + description: | > + The type of actuator attached to the hardware. > + Allowed values are, > + 0 - HAP_TYPE_LRA > + 1 - HAP_TYPE_ERM > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [ 0, 1 ] > + default: 0 > + > + qcom,wave-shape: > + description: | > + Selects the wave shape to use. > + Allowed values are, > + 0 - HAP_WAVE_SINE > + 1 - HAP_WAVE_SQUARE > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [ 0, 1 ] > + default: 0 > + > + qcom,play-mode: > + description: | > + Selects the play mode to use. > + Allowed values are, > + 0 - HAP_PLAY_DIRECT > + 1 - HAP_PLAY_BUFFER > + 2 - HAP_PLAY_AUDIO > + 3 - HAP_PLAY_PWM > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [ 0, 1, 2, 3 ] > + default: 2 > + > + qcom,wave-play-rate-us: > + description: | > + Wave sample durection in microseconds, 1/f where f > + is the resonant frequency of the actuator. > + $ref: /schemas/types.yaml#/definitions/uint32 Don't need a type for standard units. > + minimum: 0 > + maximum: 20475 > + > + qcom,brake-pattern: > + minItems: 4 > + maxItems: 4 > + description: | > + The brake pattern are the strengths of the pattern > + used to brake the haptics. Allowed values are, > + 0 - 0V > + 1 - Vmax/4 > + 2 - Vmax/2 > + 3 - Vmax > + $ref: /schemas/types.yaml#/definitions/uint32-array > + default: [0x3, 0x3, 0x2, 0x1] To express the constraints on all items: items: enum: [ 0, 1, 2, 3 ] (items is a schema here rather than a list) > + > +required: > + - compatible > + - reg > + - interrupts > + - qcom,wave-play-rate-us > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/spmi/spmi.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/input/qcom,spmi-haptics.h> > + > + pmi8998_lsid1: pmic@3 { Drop unused labels. > + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; Really, this needs to be converted to schema first so we're not adding warnings. > + reg = <0x3 SPMI_USID>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + pmi8998_haptics: haptics@c000 { > + compatible = "qcom,pmi8998-haptics", "qcom,spmi-haptics"; > + reg = <0xc000>; > + > + interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>, > + <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>; > + interrupt-names = "short", "play"; > + > + qcom,wave-shape = <HAP_WAVE_SINE>; > + qcom,play-mode = <HAP_PLAY_BUFFER>; > + qcom,brake-pattern = <0x3 0x3 0x2 0x1>; > + > + status = "disabled"; Don't show status in examples. > + }; > + }; > diff --git a/include/dt-bindings/input/qcom,spmi-haptics.h b/include/dt-bindings/input/qcom,spmi-haptics.h > new file mode 100644 > index 000000000000..14a7e7d1471e > --- /dev/null > +++ b/include/dt-bindings/input/qcom,spmi-haptics.h > @@ -0,0 +1,32 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ Dual license please. DT files are used elsewhere. > +/* > + * This header provides constants for pmi8998 SPMI haptics options. > + */ > + > +#ifndef _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ > +#define _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ > + > +// Actuator types > +#define HAP_TYPE_LRA 0 > +#define HAP_TYPE_ERM 1 > + > +// LRA Wave type > +#define HAP_WAVE_SINE 0 > +#define HAP_WAVE_SQUARE 1 > + > +// Play modes > +#define HAP_PLAY_DIRECT 0 > +#define HAP_PLAY_BUFFER 1 > +#define HAP_PLAY_AUDIO 2 > +#define HAP_PLAY_PWM 3 > + > +#define HAP_PLAY_MAX HAP_PLAY_PWM > + > +// Auto resonance type > +#define HAP_AUTO_RES_NONE 0 > +#define HAP_AUTO_RES_ZXD 1 > +#define HAP_AUTO_RES_QWD 2 > +#define HAP_AUTO_RES_MAX_QWD 3 > +#define HAP_AUTO_RES_ZXD_EOP 4 > + > +#endif /* _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ */ > -- > 2.31.1 > > >
Hi Rob, Thanks a lot for your feedback. I'm still struggling a little to get my head around schema, would you mind clarifying a few things? On 22/06/2021 16:58, Rob Herring wrote: > On Fri, Jun 18, 2021 at 05:51:03PM +0000, Caleb Connolly wrote: >> Add bindings for qcom PMIC SPMI haptics driver. >> >> Signed-off-by: Caleb Connolly <caleb@connolly.tech> >> --- >> .../bindings/input/qcom,spmi-haptics.yaml | 128 ++++++++++++++++++ >> include/dt-bindings/input/qcom,spmi-haptics.h | 32 +++++ >> 2 files changed, 160 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml >> create mode 100644 include/dt-bindings/input/qcom,spmi-haptics.h >> >> diff --git a/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml >> new file mode 100644 >> index 000000000000..8ef9b4ec3a07 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml >> @@ -0,0 +1,128 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +# Copyright 2020 Unisoc Inc. >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/input/qcom,spmi-haptics.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Technologies Inc PMI8998 spmi haptics >> + >> +maintainers: >> + - Caleb Connolly <caleb@connolly.tech> >> + >> +description: | >> + Qualcomm SPMI haptics is a peripheral on some QTI PMICs. It supports linear resonant >> + actuators and eccentric rotating mass type haptics commonly found in mobile devices. >> + It supports multiple sources of wave data such as an internal buffer, direct play >> + (from kernel or userspace) as well as an audio output mode. >> + >> +properties: >> + compatible: >> + items: >> + - enum: >> + - qcom,pmi8998-haptics >> + - qcom,pmi8996-haptics >> + - qcom,pmi8941-haptics >> + - const: qcom,spmi-haptics >> + >> + reg: >> + maxItems: 1 >> + >> + interrupts: >> + items: >> + - description: short circuit interrupt >> + - description: play interrupt >> + >> + interrupt-names: >> + items: >> + - const: short >> + - const: play >> + >> + qcom,actuator-type: >> + description: | >> + The type of actuator attached to the hardware. >> + Allowed values are, >> + 0 - HAP_TYPE_LRA >> + 1 - HAP_TYPE_ERM >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + enum: [ 0, 1 ] >> + default: 0 >> + >> + qcom,wave-shape: >> + description: | >> + Selects the wave shape to use. >> + Allowed values are, >> + 0 - HAP_WAVE_SINE >> + 1 - HAP_WAVE_SQUARE >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + enum: [ 0, 1 ] >> + default: 0 >> + >> + qcom,play-mode: >> + description: | >> + Selects the play mode to use. >> + Allowed values are, >> + 0 - HAP_PLAY_DIRECT >> + 1 - HAP_PLAY_BUFFER >> + 2 - HAP_PLAY_AUDIO >> + 3 - HAP_PLAY_PWM >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + enum: [ 0, 1, 2, 3 ] >> + default: 2 >> + >> + qcom,wave-play-rate-us: >> + description: | >> + Wave sample durection in microseconds, 1/f where f >> + is the resonant frequency of the actuator. >> + $ref: /schemas/types.yaml#/definitions/uint32 > Don't need a type for standard units. > >> + minimum: 0 >> + maximum: 20475 >> + >> + qcom,brake-pattern: >> + minItems: 4 >> + maxItems: 4 >> + description: | >> + The brake pattern are the strengths of the pattern >> + used to brake the haptics. Allowed values are, >> + 0 - 0V >> + 1 - Vmax/4 >> + 2 - Vmax/2 >> + 3 - Vmax >> + $ref: /schemas/types.yaml#/definitions/uint32-array >> + default: [0x3, 0x3, 0x2, 0x1] > To express the constraints on all items: > > items: > enum: [ 0, 1, 2, 3 ] > > (items is a schema here rather than a list) Ah, that's exactly what I was looking for! Should I replace one of the other properties with this? Or should I just add it to the list? > >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + - qcom,wave-play-rate-us >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/spmi/spmi.h> >> + #include <dt-bindings/interrupt-controller/irq.h> >> + #include <dt-bindings/input/qcom,spmi-haptics.h> >> + >> + pmi8998_lsid1: pmic@3 { > Drop unused labels. > >> + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; > Really, this needs to be converted to schema first so we're not adding > warnings. Hmm, is it ok to leave this here? I had a look at converting the spmi-pmic bindings to schema but it's a bit beyond me in all honestly. > >> + reg = <0x3 SPMI_USID>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + pmi8998_haptics: haptics@c000 { >> + compatible = "qcom,pmi8998-haptics", "qcom,spmi-haptics"; >> + reg = <0xc000>; >> + >> + interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>, >> + <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>; >> + interrupt-names = "short", "play"; >> + >> + qcom,wave-shape = <HAP_WAVE_SINE>; >> + qcom,play-mode = <HAP_PLAY_BUFFER>; >> + qcom,brake-pattern = <0x3 0x3 0x2 0x1>; >> + >> + status = "disabled"; > Don't show status in examples. > >> + }; >> + }; >> diff --git a/include/dt-bindings/input/qcom,spmi-haptics.h b/include/dt-bindings/input/qcom,spmi-haptics.h >> new file mode 100644 >> index 000000000000..14a7e7d1471e >> --- /dev/null >> +++ b/include/dt-bindings/input/qcom,spmi-haptics.h >> @@ -0,0 +1,32 @@ >> +/* SPDX-License-Identifier: GPL-2.0-only */ > Dual license please. DT files are used elsewhere. Will do. > >> +/* >> + * This header provides constants for pmi8998 SPMI haptics options. >> + */ >> + >> +#ifndef _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ >> +#define _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ >> + >> +// Actuator types >> +#define HAP_TYPE_LRA 0 >> +#define HAP_TYPE_ERM 1 >> + >> +// LRA Wave type >> +#define HAP_WAVE_SINE 0 >> +#define HAP_WAVE_SQUARE 1 >> + >> +// Play modes >> +#define HAP_PLAY_DIRECT 0 >> +#define HAP_PLAY_BUFFER 1 >> +#define HAP_PLAY_AUDIO 2 >> +#define HAP_PLAY_PWM 3 >> + >> +#define HAP_PLAY_MAX HAP_PLAY_PWM >> + >> +// Auto resonance type >> +#define HAP_AUTO_RES_NONE 0 >> +#define HAP_AUTO_RES_ZXD 1 >> +#define HAP_AUTO_RES_QWD 2 >> +#define HAP_AUTO_RES_MAX_QWD 3 >> +#define HAP_AUTO_RES_ZXD_EOP 4 >> + >> +#endif /* _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ */ >> -- >> 2.31.1 >> >> >> Kind Regards, Caleb
diff --git a/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml new file mode 100644 index 000000000000..8ef9b4ec3a07 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,spmi-haptics.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies Inc PMI8998 spmi haptics + +maintainers: + - Caleb Connolly <caleb@connolly.tech> + +description: | + Qualcomm SPMI haptics is a peripheral on some QTI PMICs. It supports linear resonant + actuators and eccentric rotating mass type haptics commonly found in mobile devices. + It supports multiple sources of wave data such as an internal buffer, direct play + (from kernel or userspace) as well as an audio output mode. + +properties: + compatible: + items: + - enum: + - qcom,pmi8998-haptics + - qcom,pmi8996-haptics + - qcom,pmi8941-haptics + - const: qcom,spmi-haptics + + reg: + maxItems: 1 + + interrupts: + items: + - description: short circuit interrupt + - description: play interrupt + + interrupt-names: + items: + - const: short + - const: play + + qcom,actuator-type: + description: | + The type of actuator attached to the hardware. + Allowed values are, + 0 - HAP_TYPE_LRA + 1 - HAP_TYPE_ERM + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + default: 0 + + qcom,wave-shape: + description: | + Selects the wave shape to use. + Allowed values are, + 0 - HAP_WAVE_SINE + 1 - HAP_WAVE_SQUARE + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + default: 0 + + qcom,play-mode: + description: | + Selects the play mode to use. + Allowed values are, + 0 - HAP_PLAY_DIRECT + 1 - HAP_PLAY_BUFFER + 2 - HAP_PLAY_AUDIO + 3 - HAP_PLAY_PWM + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + default: 2 + + qcom,wave-play-rate-us: + description: | + Wave sample durection in microseconds, 1/f where f + is the resonant frequency of the actuator. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 20475 + + qcom,brake-pattern: + minItems: 4 + maxItems: 4 + description: | + The brake pattern are the strengths of the pattern + used to brake the haptics. Allowed values are, + 0 - 0V + 1 - Vmax/4 + 2 - Vmax/2 + 3 - Vmax + $ref: /schemas/types.yaml#/definitions/uint32-array + default: [0x3, 0x3, 0x2, 0x1] + +required: + - compatible + - reg + - interrupts + - qcom,wave-play-rate-us + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/qcom,spmi-haptics.h> + + pmi8998_lsid1: pmic@3 { + compatible = "qcom,pmi8998", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmi8998_haptics: haptics@c000 { + compatible = "qcom,pmi8998-haptics", "qcom,spmi-haptics"; + reg = <0xc000>; + + interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>, + <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "short", "play"; + + qcom,wave-shape = <HAP_WAVE_SINE>; + qcom,play-mode = <HAP_PLAY_BUFFER>; + qcom,brake-pattern = <0x3 0x3 0x2 0x1>; + + status = "disabled"; + }; + }; diff --git a/include/dt-bindings/input/qcom,spmi-haptics.h b/include/dt-bindings/input/qcom,spmi-haptics.h new file mode 100644 index 000000000000..14a7e7d1471e --- /dev/null +++ b/include/dt-bindings/input/qcom,spmi-haptics.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * This header provides constants for pmi8998 SPMI haptics options. + */ + +#ifndef _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ +#define _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ + +// Actuator types +#define HAP_TYPE_LRA 0 +#define HAP_TYPE_ERM 1 + +// LRA Wave type +#define HAP_WAVE_SINE 0 +#define HAP_WAVE_SQUARE 1 + +// Play modes +#define HAP_PLAY_DIRECT 0 +#define HAP_PLAY_BUFFER 1 +#define HAP_PLAY_AUDIO 2 +#define HAP_PLAY_PWM 3 + +#define HAP_PLAY_MAX HAP_PLAY_PWM + +// Auto resonance type +#define HAP_AUTO_RES_NONE 0 +#define HAP_AUTO_RES_ZXD 1 +#define HAP_AUTO_RES_QWD 2 +#define HAP_AUTO_RES_MAX_QWD 3 +#define HAP_AUTO_RES_ZXD_EOP 4 + +#endif /* _DT_BINDINGS_QCOM_PMIC_SPMI_HAPTICS_ */
Add bindings for qcom PMIC SPMI haptics driver. Signed-off-by: Caleb Connolly <caleb@connolly.tech> --- .../bindings/input/qcom,spmi-haptics.yaml | 128 ++++++++++++++++++ include/dt-bindings/input/qcom,spmi-haptics.h | 32 +++++ 2 files changed, 160 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/qcom,spmi-haptics.yaml create mode 100644 include/dt-bindings/input/qcom,spmi-haptics.h -- 2.31.1