| Message ID | 20210530164923.18134-5-paul@crapouillou.net (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | clk: Ingenic JZ4760(B) support | expand |
On 2021/5/31 上午12:49, Paul Cercueil wrote: > We can express that a PLL has no bypass bit by simply setting the > .bypass_bit field to a negative value. > > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- > drivers/clk/ingenic/cgu.c | 4 ++-- > drivers/clk/ingenic/cgu.h | 7 +++---- > drivers/clk/ingenic/jz4770-cgu.c | 3 +-- > 3 files changed, 6 insertions(+), 8 deletions(-) Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com> # on CU1830-neo/X1830 > > diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c > index 7686072aff8f..58f7ab5cf0fe 100644 > --- a/drivers/clk/ingenic/cgu.c > +++ b/drivers/clk/ingenic/cgu.c > @@ -99,7 +99,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) > od_enc = ctl >> pll_info->od_shift; > od_enc &= GENMASK(pll_info->od_bits - 1, 0); > > - if (!pll_info->no_bypass_bit) { > + if (pll_info->bypass_bit >= 0) { > ctl = readl(cgu->base + pll_info->bypass_reg); > > bypass = !!(ctl & BIT(pll_info->bypass_bit)); > @@ -226,7 +226,7 @@ static int ingenic_pll_enable(struct clk_hw *hw) > u32 ctl; > > spin_lock_irqsave(&cgu->lock, flags); > - if (!pll_info->no_bypass_bit) { > + if (pll_info->bypass_bit >= 0) { > ctl = readl(cgu->base + pll_info->bypass_reg); > > ctl &= ~BIT(pll_info->bypass_bit); > diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h > index 44d97a259692..10521d1b7b12 100644 > --- a/drivers/clk/ingenic/cgu.h > +++ b/drivers/clk/ingenic/cgu.h > @@ -39,10 +39,10 @@ > * their encoded values in the PLL control register, or -1 for > * unsupported values > * @bypass_reg: the offset of the bypass control register within the CGU > - * @bypass_bit: the index of the bypass bit in the PLL control register > + * @bypass_bit: the index of the bypass bit in the PLL control register, or > + * -1 if there is no bypass bit > * @enable_bit: the index of the enable bit in the PLL control register > * @stable_bit: the index of the stable bit in the PLL control register > - * @no_bypass_bit: if set, the PLL has no bypass functionality > */ > struct ingenic_cgu_pll_info { > unsigned reg; > @@ -52,10 +52,9 @@ struct ingenic_cgu_pll_info { > u8 n_shift, n_bits, n_offset; > u8 od_shift, od_bits, od_max; > unsigned bypass_reg; > - u8 bypass_bit; > + s8 bypass_bit; > u8 enable_bit; > u8 stable_bit; > - bool no_bypass_bit; > }; > > /** > diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c > index 381a27f20b51..2321742b3471 100644 > --- a/drivers/clk/ingenic/jz4770-cgu.c > +++ b/drivers/clk/ingenic/jz4770-cgu.c > @@ -139,8 +139,7 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = { > .od_bits = 2, > .od_max = 8, > .od_encoding = pll_od_encoding, > - .bypass_reg = CGU_REG_CPPCR1, > - .no_bypass_bit = true, > + .bypass_bit = -1, > .enable_bit = 7, > .stable_bit = 6, > },
Quoting Paul Cercueil (2021-05-30 09:49:21) > We can express that a PLL has no bypass bit by simply setting the > .bypass_bit field to a negative value. > > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- Applied to clk-next
diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c index 7686072aff8f..58f7ab5cf0fe 100644 --- a/drivers/clk/ingenic/cgu.c +++ b/drivers/clk/ingenic/cgu.c @@ -99,7 +99,7 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) od_enc = ctl >> pll_info->od_shift; od_enc &= GENMASK(pll_info->od_bits - 1, 0); - if (!pll_info->no_bypass_bit) { + if (pll_info->bypass_bit >= 0) { ctl = readl(cgu->base + pll_info->bypass_reg); bypass = !!(ctl & BIT(pll_info->bypass_bit)); @@ -226,7 +226,7 @@ static int ingenic_pll_enable(struct clk_hw *hw) u32 ctl; spin_lock_irqsave(&cgu->lock, flags); - if (!pll_info->no_bypass_bit) { + if (pll_info->bypass_bit >= 0) { ctl = readl(cgu->base + pll_info->bypass_reg); ctl &= ~BIT(pll_info->bypass_bit); diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h index 44d97a259692..10521d1b7b12 100644 --- a/drivers/clk/ingenic/cgu.h +++ b/drivers/clk/ingenic/cgu.h @@ -39,10 +39,10 @@ * their encoded values in the PLL control register, or -1 for * unsupported values * @bypass_reg: the offset of the bypass control register within the CGU - * @bypass_bit: the index of the bypass bit in the PLL control register + * @bypass_bit: the index of the bypass bit in the PLL control register, or + * -1 if there is no bypass bit * @enable_bit: the index of the enable bit in the PLL control register * @stable_bit: the index of the stable bit in the PLL control register - * @no_bypass_bit: if set, the PLL has no bypass functionality */ struct ingenic_cgu_pll_info { unsigned reg; @@ -52,10 +52,9 @@ struct ingenic_cgu_pll_info { u8 n_shift, n_bits, n_offset; u8 od_shift, od_bits, od_max; unsigned bypass_reg; - u8 bypass_bit; + s8 bypass_bit; u8 enable_bit; u8 stable_bit; - bool no_bypass_bit; }; /** diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c index 381a27f20b51..2321742b3471 100644 --- a/drivers/clk/ingenic/jz4770-cgu.c +++ b/drivers/clk/ingenic/jz4770-cgu.c @@ -139,8 +139,7 @@ static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = { .od_bits = 2, .od_max = 8, .od_encoding = pll_od_encoding, - .bypass_reg = CGU_REG_CPPCR1, - .no_bypass_bit = true, + .bypass_bit = -1, .enable_bit = 7, .stable_bit = 6, },
We can express that a PLL has no bypass bit by simply setting the .bypass_bit field to a negative value. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/clk/ingenic/cgu.c | 4 ++-- drivers/clk/ingenic/cgu.h | 7 +++---- drivers/clk/ingenic/jz4770-cgu.c | 3 +-- 3 files changed, 6 insertions(+), 8 deletions(-)